aboutsummaryrefslogtreecommitdiff
path: root/gas/expr.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-17gas: apply md_register_arithmetic also to unary '+'Jan Beulich1-10/+15
Even a unary '+' has to be considered arithmetic; at least on x86 in Intel Syntax mode otherwise bogus insn operands may be accepted. Convert this specific case to binary + (i.e. 0 + <register>). (An implication is that md_operator(,1,) would need to deal with arch- specific equivalents of unary '+' is a similar way, if such an arch- specific variant would be specified in the first place.) To avoid duplicating what make_expr_symbol() does to construct a constant-zero expression, simply make its previously local variable a file-scope static one. This way there's also no need to invoke clean_up_expression().
2023-02-14gas: correct symbol name comparison in .startof./.sizeof. handlingJan Beulich1-2/+2
In 162c6aef1f3a ("gas: fold symbol table entries generated for .startof.() / .sizeof.()") I screwed up quite badly, inverting the case sensitive and case insensitive comparison functions.
2023-02-10Local label checks in integer_constantAlan Modra1-9/+0
"Local labels are never absolute" says the comment. Except when they are. Testcase .offset 0: a=0b I don't see any particular reason to disallow local labels inside struct definitions, so delete the comment and assertions. * expr.c (integer_constant): Delete local label assertions.
2023-02-09Internal error at gas/expr.c:1814Alan Modra1-1/+1
This is the assertion know (*input_line_pointer != ' '); after calling operand. The usual exit from operand calls SKIP_ALL_WHITESPACE. * expr.c (operand): Call SKIP_ALL_WHITESPACE after call to expr.
2023-01-27resolve gas shift expressions with large exponents to zeroAlan Modra1-2/+12
* expr.c (resolve_expression <O_left_shift, O_right_shift>): Resolve shifts exceeding bits in a valueT to zero.
2023-01-16Tidy gas/expr.c static stateAlan Modra1-2/+13
* expr.c (seen, nr_seen): Make file scope. (expr_begin): Clear seen, nr_seen, and expr_symbol_lines. (expr_end): New function. * expr.h (expr_end): Declare. * output-file.c (output_file_close): Call expr_end. * config/tc-hppa.c (expr_end): Rename to expr_parse_end. * config/tc-mips.c: Likewise. * config/tc-riscv.c: Likewise. * config/tc-sparc.c: Likewise.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-07-09expr.c make_expr_symbol: use notes obstackAlan Modra1-1/+1
* expr.c (make_expr_symbol): Use notes_alloc.
2022-04-07Add support for COFF secidx relocationsMark Harmstone1-0/+1
bfd * coff-i386.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_i386_relocation_section): Add support for R_SECTION. (coff_i386_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * coff-x86_64.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_amd64_relocation_section): Add support for R_SECTION. (coff_amd64_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * reloc.c: Add BFD_RELOC_16_SECIDX. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-i386.c (pe_directive_secidx): New function. (md_pseudo_table): Add support for secidx. (x86_cons_fix_new): Likewise. (tc_gen_reloc): Likewise. * expr.c (op_rank): Add O_secidx. * expr.h (operatorT): Likewise. * symbols.c (resolve_symbol_value): Add support for O_secidx. * testsuite/gas/i386/secidx.s: New test source file. * testsuite/gas/i386/secidx.d: New test driver file. * testsuite/gas/i386/i386.exp: Run new test. include * coff/i386.h: Define R_SECTION. * coff/x86_64.h: Likewise. ld * testsuite/ld-pe/secidx1.s: New test source file. * testsuite/ld-pe/secidx2.s: New test source file. * testsuite/ld-pe/secidx.d: New test driver file. * testsuite/ld-pe/secidx_64.d: New test driver file. * testsuite/ld-pe/pe.exp: Add new tests.
2022-03-17asan: buffer overflows after calling ignore_rest_of_lineAlan Modra1-3/+1
operand() is not a place that should be calling ignore_rest_of_line. ignore_rest_of_line shouldn't increment input_line_pointer if already at buffer limit. * expr.c (operand): Don't call ignore_rest_of_line. * read.c (s_mri_common): Likewise. (ignore_rest_of_line): Don't increment input_line_pointer if already at buffer_limit.
2022-02-16gas local label and dollar label handlingAlan Modra1-5/+5
Much of the gas source and older BFD source use "long" for function parameters and variables, when other types would be more appropriate. This patch fixes one of those cases. Dollar labels and numeric local labels do not need large numbers. Small positive itegers are usually all that is required. Due to allowing longs, it was possible for fb_label_name and dollar_label_name to overflow their buffers. * symbols.c: Delete unnecessary forward declarations. (dollar_labels, dollar_label_instances): Use unsigned int. (dollar_label_defined, dollar_label_instance): Likewise. (define_dollar_label): Likewise. (fb_low_counter, fb_labels, fb_label_instances): Likewise. (fb_label_instance_inc, fb_label_instance): Likewise. (fb_label_count, fb_label_max): Make them size_t. (dollar_label_name, fb_label_name): Rewrite using sprintf. * symbols.h (dollar_label_defined): Update prototype. (define_dollar_label, dollar_label_name): Likewise. (fb_label_instance_inc, fb_label_name): Likewise. * config/bfin-lex.l (yylex): Remove unnecessary casts. * expr.c (integer_constant): Likewise. * read.c (read_a_source_file): Limit numeric label range to int.
2022-01-04gas: rework handling of backslashes in quoted symbol namesJan Beulich1-8/+42
Strange effects can result from the present handling, e.g.: .if 1 "backslash\\": .endif yields first (correctly) "missing closing `"'" but then also "invalid character '\' in mnemonic" and further "end of file inside conditional". Symbols names ending in \ are in principle not expressable with that scheme. Instead of recording whether a backslash was seen, inspect the subsequent character right away. Only accept \\ (meaning a single backslash in the resulting symbol name) and \" (meaning an embedded double quote in the resulting symbol name) for now, warning about any other combination. While perhaps not necessary immediately, also permit concatenated strings to form a symbol name. This may become useful if going forward we would want to support \<octal> or \x<hex> sequences, where closing and re-opening quotes can be useful to delimit such sequences. The ELF "Multibyte symbol names" test gets switched away from using .set, as that would now also mean excluding nios2 and pru. By using .equiv instead, even the existing #notarget can be dropped. (For h8300 the .section directive additionally needs attributes specified, to avoid a target specific warning.)
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2022-01-01ubsan: signed integer multiply overflowAlan Modra1-1/+6
9223371018427387904 * 2 cannot be represented in type 'long', yes, but we don't care. * expr.c (expr): Avoid signed overflow.
2021-06-18gas: fold symbol table entries generated for .startof.() / .sizeof.()Jan Beulich1-8/+47
When the same such construct is used multiple times in a source file, there's still no need to emit a separate symbol each time. Under the assumption that there won't be many of these, use a simple array lookup method to record previously used symbols.
2021-04-12Power10 bignum operandsAlan Modra1-29/+21
When built on a 32-bit host without --enable-64-bit-bfd, powerpc-linux and other 32-bit powerpc targeted binutils fail to assemble some power10 prefixed instructions with 34-bit fields. A typical error seen when running the testsuite is .../gas/testsuite/gas/ppc/prefix-pcrel.s:10: Error: bignum invalid In practice this doesn't matter for addresses: 32-bit programs don't need or use the top 2 bits of a d34 field when calculating addresses. However it may matter when loading or adding 64-bit constants with paddi. A power10 processor in 32-bit mode still has 64-bit wide GPRs. So this patch enables limited support for O_big PowerPC operands, and corrects sign extension of 32-bit constants using X_extrabit. * config/tc-ppc.c (insn_validate): Use uint64_t for operand values. (md_assemble): Likewise. Handle bignum operands. (ppc_elf_suffix): Handle O_big. Remove unnecessary input_line_pointer check. * expr.c: Delete unnecessary forward declarations. (generic_bignum_to_int32): Return uint32_t. (generic_bignum_to_int64): Return uint64_t. Compile always. (operand): Twiddle X_extrabit for unary '~'. Set X_unsigned and clear X_extrabit for unary '!'. * expr.h (generic_bignum_to_int32): Declare. (generic_bignum_to_int64): Declare. * testsuite/gas/ppc/prefix-pcrel.s, * testsuite/gas/ppc/prefix-pcrel.d: Add more instructions.
2021-04-05C99 gas configuryAlan Modra1-2/+0
Also remove alloca stuff since we don't use alloca in gas nowadays. * configure.ac: Don't check for string.h, strings.h, stdlib.h, errno.h, limits.h, locale.h or time.h. Don't check for unlink, remove, sbrk (unused) or setlocale. Adjust gas_test_headers. Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv strstr, or vsnprintf declarations. (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. * as.h: Don't include alloca-conf.h, include config.h instead. Include string.h, stdlib.h, errno.h unconditionally. Remove various fallback declarations. * asintl.h: Don't test HAVE_LOCALE_H. * as.c: Don't test HAVE_SETLOCALE. * dwarf2dbg.c: Include limits.h unconditionally. * expr.c: Likewise. * sb.c: Likewise. * symbols.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2021-03-31Use bool in gasAlan Modra1-2/+2
* as.h (POISON_BFD_BOOLEAN): Define. * as.c, * as.h, * atof-generic.c, * config/atof-ieee.c, * config/bfin-aux.h, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-elf.h, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h, * config/tc-avr.c, * config/tc-avr.h, * config/tc-bfin.c, * config/tc-bfin.h, * config/tc-bpf.c, * config/tc-cris.c, * config/tc-csky.c, * config/tc-csky.h, * config/tc-d10v.c, * config/tc-d10v.h, * config/tc-d30v.c, * config/tc-d30v.h, * config/tc-dlx.c, * config/tc-dlx.h, * config/tc-epiphany.c, * config/tc-epiphany.h, * config/tc-fr30.c, * config/tc-fr30.h, * config/tc-frv.c, * config/tc-frv.h, * config/tc-ft32.c, * config/tc-ft32.h, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386-intel.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-iq2000.h, * config/tc-lm32.c, * config/tc-lm32.h, * config/tc-m32c.c, * config/tc-m32c.h, * config/tc-m32r.c, * config/tc-m32r.h, * config/tc-m68hc11.c, * config/tc-m68k.c, * config/tc-mcore.c, * config/tc-mcore.h, * config/tc-mep.c, * config/tc-mep.h, * config/tc-metag.c, * config/tc-metag.h, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mips.h, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-mn10300.h, * config/tc-moxie.c, * config/tc-msp430.c, * config/tc-msp430.h, * config/tc-mt.c, * config/tc-mt.h, * config/tc-nds32.c, * config/tc-nds32.h, * config/tc-nios2.c, * config/tc-ns32k.c, * config/tc-or1k.c, * config/tc-or1k.h, * config/tc-pdp11.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h, * config/tc-rx.c, * config/tc-rx.h, * config/tc-s12z.c, * config/tc-s12z.h, * config/tc-s390.c, * config/tc-score.c, * config/tc-score.h, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sh.h, * config/tc-spu.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-v850.h, * config/tc-visium.c, * config/tc-visium.h, * config/tc-wasm32.c, * config/tc-wasm32.h, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xstormy16.h, * config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c, * config/tc-z8k.c, * config/xtensa-istack.h, * config/xtensa-relax.c, * config/xtensa-relax.h, * dw2gencfi.c, * dwarf2dbg.c, * dwarf2dbg.h, * expr.c, * expr.h, * frags.c, * frags.h, * listing.c, * macro.c, * output-file.c, * read.c, * read.h, * stabs.c, * symbols.c, * write.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-09-02ubsan: expr.c:1725,1741 signed integer overflowAlan Modra1-2/+2
* expr.c (add_to_result, subtract_from_result): Use unsigned addition and subtraction.
2020-08-31crx: ubsan: cannot be representedAlan Modra1-2/+2
* config/tc-crx.c: Formatting. (CRX_PRINT): Wrap params in parentheses. Remove parens from uses throughout file. (reset_vars, get_register, get_copregister, get_optype, get_opbits), (get_opflags, get_number_of_operands, parse_operand, gettrap), (handle_LoadStor, getconstant, check_range, getreg_image), (parse_operands, parse_insn, print_operand, print_constant), (exponent2scale, mask_reg, process_label_constant, set_operand), (assemble_insn, print_insn): Delete unnecessary forward declaration. (print_insn): Make static. (print_constant): Make "constant" unsigned. (assemble_insn): Tidy REVERSE_MATCH index calc. * expr.c (generic_bignum_to_int32): Cast elements to valueT.
2020-08-26PR26447 UBSAN: expr.c:1936 left shift of negative valueAlan Modra1-5/+14
PR 26447 * expr.c (expr <O_left_shift>): Do an unsigned shift.
2020-08-21Rearrange symbol_create parametersAlan Modra1-1/+1
These functions take an offset within frag, frag within section, and section parameter. So it makes sense to order the parameters as section, frag, offset. * symbols.h (symbol_new, symbol_create, local_symbol_make), (symbol_temp_new): Arrange params as section, frag, offset. * symbols.c: Adjust to suit. * as.c: Likewise. * cgen.c: Likewise. * dwarf2dbg.c: Likewise. * ecoff.c: Likewise. * expr.c: Likewise. * itbl-ops.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. * subsegs.c: Likewise. * config/obj-coff.c: Likewise. * config/obj-elf.c: Likewise. * config/obj-macho.c: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-cris.c: Likewise. * config/tc-csky.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-nds32.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-05-21GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value.John Darrington1-10/+17
In an upcoming commit, I need to be able to set the prefix used to introduce hexadecimal literal constants using a command line flag. This is not currently possible, because the switch which determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at build time. This change substitutes it for a variable to be set at start up. gas/ChangeLog: * expr.c (literal_prefix_dollar_hex): New variable. (operand)[case '$']: Use the new variable instead of the old macro. Also, move this instance of "case '$'" next to the other one, and enable it only in the complementary proprocessor case. * expr.h (literal_prefix_dollar_hex): Declare it. * config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex. * config/tc-ip2k.c: ditto * config/tc-mt.c: ditto * config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition. * config/tc-ip2k.h: ditto * config/tc-mt.h: ditto
2019-05-21Revert "GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value."John Darrington1-13/+6
This reverts commit cffc205c9eaacfa312323807cd60b9d3d1c26894.
2019-05-20GAS: Replace macro LITERAL_PREFIXDOLLAR_HEX with a runtime value.John Darrington1-6/+13
In an upcoming commit, I need to be able to set the prefix used to introduce hexadecimal literal constants using a command line flag. This is not currently possible, because the switch which determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at build time. This change substitutes it for a variable to be set at start up. gas/ChangeLog: * expr.c (literal_prefix_dollar_hex): New variable. (operand)[case '$']: Use the new variable instead of the old macro. * expr.h (literal_prefix_dollar_hex): Declare it. * config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex. * config/tc-ip2k.c: ditto * config/tc-mt.c: ditto * config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition. * config/tc-ip2k.h: ditto * config/tc-mt.h: ditto
2019-04-25Speed up locview resolution with relaxable fragsAlexandre Oliva1-1/+4
Targets such as xtensa incur a much higher overhead to resolve location view numbers than e.g. x86, because the expressions used to compute view numbers cannot be resolved soon enough. Each view number is computed by incrementing the previous view, if they are both at the same address, or by resetting it to zero otherwise. If PV is the previous view number, PL is its location, and NL is the location of the next view, its number is computed by evaluating NV = !(NL > PL) * (PV + 1). set_or_check_view uses resolve_expression to decide whether portions of this expression can be simplified to constants. The (NL > PL) subexpression is one that can often be resolved to a constant, breaking chains of view number computations at instructions of nonzero length, but not after alignment that might be unnecessary. Alas, when nearly every frag ends with a relaxable instruction, frag_offset_fixed_p will correctly fail to determine a known offset between two unresolved addresses in neighboring frags, so the unresolved symbolic operation will be constructed and used in the computation of most view numbers. This results in very deep expressions. As view numbers get referenced in location view lists, each operand in the list goes through symbol_clone_if_forward_ref, which recurses on every subexpression. If each view number were to be referenced, this would exhibit O(n^2) behavior, where n is the depth of the view number expressions, i.e., the length of view number sequences without an early resolution that cuts the expression short. This patch enables address compares used by view numbering to be resolved even when exact offsets are not known, using new logic to determine when the location either remained the same or changed for sure, even with the possibility of relaxation. This enables most view number expressions to be resolved with a small, reasonable depth. PR gas/24444 * frags.c (frag_gtoffset_p): New. * frags.h (frag_gtoffset_p): Declare it. * expr.c (resolve_expression): Use it.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-10-20PR23800, .eqv doesn't always defer expression evaluationAlan Modra1-0/+7
.eqv (and ==) ought not simplify expressions involving dot or other symbols set by .eqv. If such simplification occurs, the value of dot will be that at the assignment rather than at the place where the symbol is used. PR 23800 * expr.c (expr): Don't simplify expressions involving forward_ref symbols when mode is expr_defer. * config/tc-spu.c (spu_cons): Parse expression using normal expression evaluation if @ppu is not detected. * testsuite/gas/all/eqv-dot.d, * testsuite/gas/all/eqv-dot.s: New test. * testsuite/gas/all/gas.exp: Run it.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-42/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-11-22Riscv ld-elf/stab failure and fake label cleanup.Jim Wilson1-3/+4
* as.c: Include write.h. (common_emul_init): Use FAKE_LABEL_NAME. * ecoff.c (add_file, ecoff_directive_end, ecoff_directive_loc): Likewise. (ecoff_build_symbols): Use FAKE_LABEL_CHAR. * expr.c (get_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. * read.c (input_from_string): New. (read_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. (temp_ilp): Set input_from_string to TRUE. (restore_ilp): Set input_from_string to FALSE. * read.h (input_from_string): Declare. * symbols.c: Include write.h (S_IS_LOCAL): Check for FAKE_LABEL_CHAR. (symbol_relc_make_sym): Fix comment refering to default fake label string. * write.h (FAKE_LABEL_CHAR): New. * config/tc-riscv.h (FAKE_LABEL_CHAR): Define. * testsuite/gas/all/err-fakelabel.s: New.
2017-02-22gas: require an operand to .startof.()/.sizeof.()Jan Beulich1-0/+22
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-05Fix ICE in assembler when passed a bogus input file.Nick Clifton1-1/+1
PR gas/20904 * as.h (SKIP_ALL_WHITESPACE): New macro. * expr.c (operand): Use it.
2016-11-11Accept L and LL suffixes to integer constants.Nick Clifton1-0/+8
PR gas/20732 * expr.c (integer_constant): If tc_allow_L_suffix is defined and non-zero then accept a L or LL suffix. * testsuite/gas/sparc/pr20732.d: New test source file. * testsuite/gas/sparc/pr20732.d: New test output file. * testsuite/gas/sparc/sparc.exp: Run new test.
2016-10-06-Wimplicit-fallthrough dodgy fixesAlan Modra1-3/+3
The comment logically belongs inside the preprocessor conditional, but gcc's -Wimplicit-fallthrough loses track of it. Revert when/if https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77817 is fixed. * app.c (do_scrub_chars): Move fall through comment. * expr.c (operand): Likewise.
2016-10-06-Wimplicit-fallthrough warning fixesAlan Modra1-0/+1
Comment changes. bfd/ * coff-h8300.c: Spell fall through comments consistently. * coffgen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-ppc.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf64-ppc.c: Likewise. * elfxx-aarch64.c: Likewise. * elfxx-mips.c: Likewise. * cpu-ns32k.c: Add missing fall through comments. * elf-m10300.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-frv.c: Likewise. * elf32-i386.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-nds32.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-sh.c: Likewise. * elf32-tic6x.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-x86-64.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * ieee.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * srec.c: Likewise. * versados.c: Likewise. opcodes/ * aarch64-opc.c: Spell fall through comments consistently. * i386-dis.c: Likewise. * aarch64-dis.c: Add missing fall through comments. * aarch64-opc.c: Likewise. * arc-dis.c: Likewise. * arm-dis.c: Likewise. * i386-dis.c: Likewise. * m68k-dis.c: Likewise. * mep-asm.c: Likewise. * ns32k-dis.c: Likewise. * sh-dis.c: Likewise. * tic4x-dis.c: Likewise. * tic6x-dis.c: Likewise. * vax-dis.c: Likewise. binutils/ * dlltool.c: Spell fall through comments consistently. * objcopy.c: Likewise. * readelf.c: Likewise. * dwarf.c: Add missing fall through comments. * elfcomm.c: Likewise. * sysinfo.y: Likewise. * readelf.c: Likewise. Also remove extraneous comments. gas/ * app.c: Add missing fall through comments. * dw2gencfi.c: Likewise. * expr.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-crx.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-metag.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-vax.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * config/obj-elf.c: Likewise. * config/tc-i386.c: Likewise. * depend.c: Spell fall through comments consistently. * config/tc-arm.c: Likewise. * config/tc-d10v.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/tc-z8k.c: Likewise. gprof/ * gprof.c: Add missing fall through comments. ld/ * lexsup.c: Spell fall through comments consistently and add missing fall through comments.
2016-05-13use xstrdup, xmemdup0 and concat moreTrevor Saunders1-10/+4
gas/ChangeLog: 2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * config/obj-coff.c (obj_coff_def): Simplify string copying. (weak_name2altname): Likewise. (weak_uniquify): Likewise. (obj_coff_section): Likewise. (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_section_name): Likewise. (obj_elf_init_stab_section): Likewise. * config/obj-evax.c (evax_shorten_name): Likewise. * config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise. * config/tc-aarch64.c (create_register_alias): Likewise. * config/tc-alpha.c (load_expression): Likewise. (s_alpha_file): Likewise. (s_alpha_section_name): Likewise. (tc_gen_reloc): Likewise. * config/tc-arc.c (md_assemble): Likewise. * config/tc-arm.c (create_neon_reg_alias): Likewise. (start_unwind_section): Likewise. * config/tc-hppa.c (pa_build_unwind_subspace): Likewise. (hppa_elf_mark_end_of_function): Likewise. * config/tc-nios2.c (nios2_modify_arg): Likewise. (nios2_negate_arg): Likewise. * config/tc-rx.c (rx_section): Likewise. * config/tc-sh64.c (sh64_consume_datalabel): Likewise. * config/tc-tic30.c (tic30_find_parallel_insn): Likewise. * config/tc-tic54x.c (tic54x_include): Likewise. (tic54x_macro_info): Likewise. (subsym_get_arg): Likewise. (subsym_substitute): Likewise. (tic54x_start_line_hook): Likewise. * config/tc-xtensa.c (xtensa_literal_prefix): Likewise. (xg_reverse_shift_count): Likewise. * config/xtensa-relax.c (enter_opname_n): Likewise. (split_string): Likewise. * dwarf2dbg.c (get_filenum): Likewise. (process_entries): Likewise. * expr.c (operand): Likewise. * itbl-ops.c (alloc_entry): Likewise. * listing.c (listing_message): Likewise. (listing_title): Likewise. * macro.c (check_macro): Likewise. * stabs.c (s_xstab): Likewise. * symbols.c (symbol_relc_make_expr): Likewise. * write.c (compress_debug): Likewise.
2016-04-07Allow integer contants to have a U suffix. Improve error reporting for ↵Nick Clifton1-1/+14
missing closing parentheses. PR gas/19910 * config/tc-sparc.c (sparc_ip): Report an error if the expression inside a %-macro could not be fully parsed. * expr.c (integer_constant): Accept and ignore U suffixes to integers. (operand): When a missing closing parenthesis is encountered, report the character that was found instead. * testsuite/gas/mips/tls-ill.l: Update expected error message. * testsuite/gas/sparc/pr19910-1.d: New test driver. * testsuite/gas/sparc/pr19910-1.s: New test. * testsuite/gas/sparc/pr19910-2.l: Expected error output. * testsuite/gas/sparc/pr19910-2.s: New test. * testsuite/gas/sparc/sparc.exp: Run the new tests.
2016-04-03use XNEW and related macros moreTrevor Saunders1-1/+1
gas/ChangeLog: 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * app.c (app_push): use XNEW macro. * as.c: Likewise. * config/obj-elf.c (obj_elf_change_section): Likewise. (elf_copy_symbol_attributes): Likewise. (obj_elf_size): Likewise. (build_group_lists): Likewise. * config/tc-aarch64.c (add_operand_error_record): Likewise. (md_assemble): Likewise. (tc_gen_reloc): Likewise. (get_upper_str): Likewise. (aarch64_parse_features): Likewise. * config/tc-arm.c (insert_reg_alias): Likewise. (insert_neon_reg_alias): Likewise. (find_or_make_literal_pool): Likewise. (s_arm_elf_cons): Likewise. (add_unwind_opcode): Likewise. (arm_parse_extension): Likewise. * config/tc-avr.c (create_record_for_frag): Likewise. * config/tc-crx.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-dlx.c (s_proc): Likewise. * config/tc-ft32.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c (pa_proc): Likewise. (create_new_space): Likewise. (create_new_subspace): Likewise. * config/tc-i860.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-iq2000.c (iq2000_add_macro): Likewise. (iq2000_record_hi16): Likewise. * config/tc-m32c.c (m32c_indirect_operand): Likewise. * config/tc-m32r.c (debug_sym): Likewise. (m32r_record_hi16): Likewise. * config/tc-m68k.c (m68k_ip): Likewise. (md_begin): Likewise. * config/tc-mcore.c: Likewise. * config/tc-microblaze.c (check_got): Likewise. * config/tc-mips.c (append_insn): Likewise. (s_mipsset): Likewise. (mips_record_label): Likewise. (s_mips_end): Likewise. * config/tc-mmix.c (mmix_frob_file): Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-moxie.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-nds32.c (nds32_elf_save_pseudo_pattern): Likewise. * config/tc-ns32k.c: Likewise. * config/tc-or1k.c: Likewise. * config/tc-pdp11.c: Likewise. * config/tc-pj.c (fake_opcode): Likewise. * config/tc-ppc.c (ppc_apuinfo_section_add): Likewise. (ppc_macro): Likewise. (ppc_dwsect): Likewise. (ppc_machine): Likewise. * config/tc-rl78.c (rl78_frag_init): Likewise. * config/tc-rx.c (rx_frag_init): Likewise. * config/tc-s390.c (s390_lit_suffix): Likewise. (s390_machine): Likewise. (s390_machinemode): Likewise. * config/tc-score.c (s3_insert_reg): Likewise. (s3_gen_reloc): Likewise. * config/tc-score7.c (s7_insert_reg): Likewise. (s7_gen_reloc): Likewise. * config/tc-tic30.c (tic30_operand): Likewise. * config/tc-tic4x.c (tic4x_inst_make): Likewise. * config/tc-tic54x.c (stag_add_field): Likewise. (tic54x_struct): Likewise. (tic54x_space): Likewise. (tic54x_field): Likewise. (tic54x_mlib): Likewise. (subsym_substitute): Likewise. * config/tc-tic6x.c (tic6x_frob_label): Likewise. * config/tc-vax.c: Likewise. * config/tc-xc16x.c: Likewise. * config/tc-xtensa.c (xtensa_add_insn_label): Likewise. (directive_push): Likewise. (xtensa_begin_directive): Likewise. (tokenize_arguments): Likewise. (xtensa_add_literal_sym): Likewise. (new_resource_table): Likewise. (resize_resource_table): Likewise. (emit_single_op): Likewise. (xtensa_create_trampoline_frag): Likewise. (xtensa_maybe_create_literal_pool_frag): Likewise. (xtensa_add_config_info): Likewise. (xtensa_realloc_fixup_cache): Likewise. (add_subseg_info): Likewise. (cache_literal_section): Likewise. (add_xt_block_frags): Likewise. (add_xt_prop_frags): Likewise. (init_op_placement_info_table): Likewise. (build_section_rename): Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * depend.c (register_dependency): Likewise. * dwarf2dbg.c (get_line_subseg): Likewise. (dwarf2_gen_line_info_1): Likewise. (get_filenum): Likewise. * ecoff.c (allocate_scope): Likewise. (allocate_vlinks): Likewise. (allocate_shash): Likewise. (allocate_thash): Likewise. (allocate_tag): Likewise. (allocate_forward): Likewise. (allocate_thead): Likewise. (allocate_lineno_list): Likewise. * expr.c (make_expr_symbol): Likewise. * hash.c (hash_new_sized): Likewise. * input-file.c (input_file_push): Likewise. * listing.c (file_info): Likewise. (listing_newline): Likewise. * macro.c (new_formal): Likewise. (define_macro): Likewise. * remap.c (add_debug_prefix_map): Likewise. * symbols.c (symbol_find_noref): Likewise. (define_dollar_label): Likewise. (fb_label_instance_inc): Likewise. (symbol_relc_make_value): Likewise.
2016-04-03cleanup FLT_CHARS and EXP_CHARSTrevor Saunders1-2/+0
Providing declarations in tc.h points out that alpha wasn't properly marking FLT_CHARS as const. We can also get rid of the confusing redefinition of X_CHARS to mmix_x_chars. Finally we can get rid of some now redundant declarations of these constants. gas/ChangeLog: 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * config/tc-alpha.c: Const qualify FLT_CHARS. * config/atof-ieee.c: Remove declarations of FLT_CHARS and EXP_CHARS. * config/tc-cris.h: Likewise. * expr.c: Likewise. * config/tc-mmix.c (md_atof): Adjust comment. * config/tc-mmix.h: Stop defining FLT_CHARS and EXP_CHARS as macros. * tc.h: Declare FLT_CHARS and EXP_CHARS.
2016-02-22Add more const type qualifiers to GAS sources.Trevor Saunders1-3/+3
* output-file.c (output_file_create): Make file name argument const. (output_file_close): Likewise. * output-file.h (output_file_create): Adjust. (output_file_close): Likewise. * depend.c (quote_string_for_make): Make src argument const char *. (register_dependency): Likewise. (wrap_output): Likewise. * as.h (register_dependency): Adjust. * config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to as_where (); * symbols.c (S_SET_EXTERNAL): Likewise. * input-scrub.c (as_where): Return the file name. * as.h (as_where): Adjust prototype. * app.c (do_scrub_chars): Adjust. * cond.c (s_elseif): Likewise. (s_else): Likewise. (initialize_cframe): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-ia64.c (md_assemble): Likewise. (dot_alias): Likewise. * config/tc-m68k.c (m68k_frob_label): Likewise. * config/tc-mmix.c (s_bspec): Likewise. (mmix_handle_mmixal): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-xtensa.c (directive_push): Likewise. (xtensa_sanity_check): Likewise. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * dwarf2dbg.c (dwarf2_where): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * expr.c (make_expr_symbol): Likewise. * frags.c (frag_new): Likewise. (frag_var_init): Likewise. * listing.c (listing_newline): Likewise. * messages.c (identify): Likewise. (as_show_where): Likewise. (as_warn_internal): Likewise. (as_bad_internal): Likewise. * read.c (s_irp): Likewise. (s_macro): Likewise. (s_reloc): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. (stabs_generate_asm_func): Likewise. * write.c (fix_new_internal): Likewise. * as.h (PRINTF_WHERE_LIKE): Make file name argument const. (as_warn_value_out_of_range): Adjust prototype. (as_bad_value_out_of_range): Adjust prototype. * messages.c (identify): Make file name argument const char *. (as_warn_internal): Likewise. (as_warn_where): Likewise. (as_bad_internal): Likewise. (as_bad_where): Likewise. (as_internal_value_out_of_range): Likewise. (as_warn_value_out_of_range): Likewise. (as_bad_value_out_of_range): Likewise. * as.h (found_comment_file): Change type to const char *. * cond.c (file_line::file): Likewise. * config/obj-coff.c (obj_coff_init_stab_section): Make variable const. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/tc-aarch64.c (output_info): Likewise. * config/tc-alpha.c (insert_operand): Likewise. * config/tc-arc.c (insert_operand): Likewise. * config/tc-d30v.c (check_size): Likewise. * config/tc-ia64.c (struct alias): Likewise. * config/tc-m68k.c (struct label_line): Likewise. * config/tc-mcore.c (md_apply_fix): Likewise. * config/tc-microblaze.c (md_estimate_size_before_relax): Likewise. * config/tc-mips.c (mips16_immed): Likewise. * config/tc-mmix.c (mmix_handle_mmixal): Likewise. * config/tc-ppc.c (ppc_insert_operand): Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-s390.c (s390_insert_operand): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. (tic54x_adjust_symtab): Likewise. * config/tc-tilegx.c (insert_operand): Likewise. (apply_special_operator): Likewise. * config/tc-tilepro.c (insert_operand): Likewise. * config/tc-xtensa.c (directive_push): Likewise. * ecoff.c (add_file): Likewise. (ecoff_generate_asm_lineno): Likewise. * listing.c (listing_newline): Likewise. * read.c (s_irp): Likewise. * write.c (install_reloc): Likewise. * write.h (struct fix): Likewise. * input-file.c (file_name): Change type to const char *. (saved_file::file_name): Likewise. (input_file_open): Change type of argument to const char *. * input-file.h (input_file_open): Adjust. * input-scrub.c (logical_input_file): change type to const char *. (physical_input_file): Likewise. (struct input_save): Adjust. (input_scrub_push): Adjust. (input_scrub_begin): Adjust. (as_where): Adjust. * input-scrub.c (input_scrub_new_file): Make file name argument const. (input_scrub_include_file): Likewise. (new_logical_line_flags): Likewise. (new_logical_line): Likewise. * as.h: Adjust. * frags.h (struct frag): Change type of fr_file to const char *. * expr.c (expr_symbol_where): Change type of file argument to const char **. * expr.h (expr_symbol_where): Likewise. * config/tc-i370.c (md_apply_fix): adjust. * config/tc-mmix.c (mmix_md_end): Likewise. * config/tc-ppc.c (md_apply_fix): Likewise. * config/tc-s390.c (md_apply_fix): Likewise. * symbols.c (report_op_error): Likewise. (resolve_symbol_value): Likewise. * config/tc-ia64.c (slot::src_file): Change type to const char *. (rsrc::file): Likewise. * config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to const char *. (xtensa_relax_frag): Likewise. (md_convert_frag): Likewise. (tinsn_to_slotbuf): Likewise. * expr.c (expr_symbol_line): Likewise. * macro.c (define_macro): Likewise. * macro.h (macro_struct): Likewise. * messages.c (as_show_where): Likewise. * read.c (s_macro): Likewise. * stabs.c (stabs_generate_asm_file): Likewise. (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. * write.h (struct reloc_list): Likewise. * input-scrub.c (as_where): Change return type to const char *. * as.h (as_wheree): Adjust.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-08-21Allow symbol and label names to be enclosed in double quotes.Nick Clifton1-24/+54
gas PR gas/18581 * expr.c (get_symbol_end): Rename to get_symbol_name. Add a return parameter pointing to the start of the symbol. Allow symbol names enclosed in double quotes. (restore_line_pointer): New function. Replace the NUL character inserted into the input stream with the given character. If the character was a double quote, advance the input pointer. * expr.h (get_symbol_end): Delete. (get_symbol_name): Add prototype. (restore_line_pointer): Prototype. * read.h (SKIP_WHITESPACE_AFTER_NAME): New macro. * doc/as.texinfo (Symbol Intro): Document that symbol names can now be enclosed in double quotes. * cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name. Use restore_line_pointer to replace the NUL in the input stream. Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol. Check for the use of double quoted symbol names. * expr.c: Likewise. * config/obj-aout.c: Likewise. * config/obj-coff-seh.c: Likewise. * config/obj-coff.c: Likewise. * config/obj-elf.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/obj-som.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-iq2000.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-tic6x.c: Likewise. * config/tc-tilegx.c: Likewise. * config/tc-tilepro.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbgc.: Likewise. * ecoff.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. tests PR gas/18581 * gas/all/byte.d: Disable this test. Quoted expressions are now allowed in .byte directives. * gas/all/quoted-sym-names.s: New test. * gas/all/quoted-sym-names.d: Expected output. * gas/all/gas.exp: Run the new test.
2015-08-13gas 0f handlingAlan Modra1-38/+25
_start: .byte 0f-_start 0: Fixes ..:2: Error: floating point number invalid ..:2: Error: junk at end of line, first unrecognized character is `_' * expr.c (operand): Rewrite handling of operands starting with "0f". If atof_generic only parses "-" or "+", treat as expression.
2015-08-13gas 0b vs 0b0 vs 00bAlan Modra1-21/+23
* expr.c (integer_constant): Return O_absent expression if eol. (operand): For targets with both LOCAL_LABELS_FB and NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary digits as a local label reference. Correct handling of 0b prefix. If a suffix is not allowed, error on 0B.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-11-04Don't use register keywordAlan Modra1-1/+1
* expr.c (expr_symbol_where): Don't use register keyword. * app.c (app_push, app_pop, do_scrub_chars): Likewise. * ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint, add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file, ecoff_build_lineno, ecoff_setup_ext, allocate_cluster. allocate_scope, allocate_vlinks, allocate_shash, allocate_thash, allocate_tag, allocate_forward, allocate_thead, allocate_lineno_list): Likewise. * frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise. * input-file.c (input_file_push, input_file_pop): Likewise. * input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise. * subsegs.c (subseg_change): Likewise. * symbols.c (colon, symbol_table_insert, symbol_find_or_make) (dollar_label_name, fb_label_name): Likewise. * write.c (relax_align): Likewise. * config/tc-alpha.c (s_alpha_pdesc): Likewise. * config/tc-bfin.c (bfin_s_bss): Likewise. * config/tc-i860.c (md_estimate_size_before_relax): Likewise. * config/tc-m68hc11.c (md_convert_frag): Likewise. * config/tc-m68k.c (m68k_ip, crack_operand): Likewise. (md_convert_frag_1, s_even): Likewise. * config/tc-mips.c (mips_clear_insn_labels): Likewise. * config/tc-mn10200.c (md_begin): Likewise. * config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise. * config/tc-sh.c (sh_elf_cons): Likewise. * config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise. * config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R. (yylex, m68k_ip_op, yyerror): Convert from K&R.
generated by cgit v1.1 at 2025-01-17 18:39:57 +0000