aboutsummaryrefslogtreecommitdiff
path: root/gas/doc
AgeCommit message (Collapse)AuthorFilesLines
2018-12-05[aarch64] Add support for pointer authentication B keySam Tebbs1-0/+8
Armv8.3-A has another key used in pointer authentication called the B-key (other than the A-key that is already supported). In order for stack unwinders to work it is necessary to be able to identify frames that have been signed with the B-key rather than the A-key and it was felt that keeping this as an augmentation character in the CIE was the best bet. The DWARF extensions for ARM therefore propose to add a new augmentation character 'B' to the CIE augmentation string and the corresponding cfi directive ".cfi_b_key_frame". I've made the relevant changes to GAS and LD to add support for B-key unwinding, which required modifying LD to check for 'B' in the augmentation string, adding the ".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to GAS's fde_entry and cie_entry structs. The pointer authentication instructions will behave as NOPs on architectures that don't support them, and so a check for the architecture being assembled for is not necessary since there will be no behavioural difference between augmentation strings with and without the 'B' character on such architectures. 2018-12-05 Sam Tebbs <sam.tebbs@arm.com> bfd/ * elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'. gas/ * dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation. (alloc_fde_entry): Add tc_fde_entry_init_extra invocation. (output_cie): Add tc_output_cie_extra invocation. (select_cie_for_fde): Add tc_cie_fde_equivalent_extra and tc_cie_entry_init_extra invocation. (frch_cfi_data, cfa_save_data): Move to dwgencfi.h. * config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare. (md_pseudo_table): Add "cfi_b_key_frame". * config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras, tc_fde_entry_init_extra, tc_output_cie_extra, tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define. * dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation. (pointer_auth_key): Define. (frch_cfi_data, cfa_save_data): Move from dwgencfi.c. * doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation. * testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
2018-11-30GAS/MIPS: Add `-mfix-r5900' option for the R5900 short loop erratumFredrik Noring2-0/+17
`-march=r5900' already enables the R5900 short loop workaround. However, the R5900 ISA and most other MIPS ISAs are mutually exclusive since R5900-specific instructions are generated as well. The `-mfix-r5900' option can be used in combination with e.g. `-mips2' or `-mips3' to generate generic MIPS binaries that also work with the R5900 target. This change has been tested with `make RUNTESTFLAGS=mips.exp check-gas' for the targets `mipsr5900el-unknown-linux-gnu', `mipsr5900el-elf' and `mips3-unknown-linux-gnu'. gas/ * config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit): New variables. (options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900 enumeration constants. (md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options. (can_swap_branch_p, md_parse_option, mips_after_parse_args): Handle the new options. (md_show_usage): Document the `-mfix-r5900' option. * doc/as.texi: Likewise. * doc/c-mips.texi: Likewise. * testsuite/gas/mips/mips.exp: Run R5900 dump tests. * testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option. * testsuite/gas/mips/r5900-fix.s: Likewise. * testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'. * testsuite/gas/mips/r5900-no-fix.s: Likewise.
2018-11-27RISC-V: Add .insn CA support.Jim Wilson1-1/+10
gas/ * config/tc-riscv.c (validate_riscv_insn) <'F'>: Add support for CF6 and CF2 operands. (riscv_ip) <'F'>: Likewise. * doc/c-riscv.texi (RISC-V-Formats): Add func6 abbreviation. Use rs2 instead of rs1 in CR description. Add CA docs. * gas/testsuite/riscv/insn.s: Add use of .insn ca. * gas/testsuite/riscv/insn.d: Update to match. include/ * opcode/riscv.h (OP_MASK_CFUNCT6, OP_SH_CFUNCT6): New. (OP_MASK_CFUNCT2, OP_SH_CFUNCT2): New. opcodes/ * riscv-opc.c (ciw): Fix whitespace to align columns. (ca): New.
2018-11-12[BINUTILS, AARCH64, 1/8] Add support for Memory Tagging Extension for ARMv8.5-ASudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions. Memory Tagging Extension is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch adds the new command line option and the new feature macros. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_memtag): New. (MEMTAG, MEMTAG_INSN): New. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add "memtag" as a new option. * doc/c-aarch64.texi: Document the same.
2018-10-29Move struc-symbol.h to symbols.cAlan Modra1-9/+2
This file was never supposed to be widely used. The fact that it has found its way into many gas files led to bugs, typically when code expecting a symbolS* to point at a struct symbol is presented with a struct local_symbol. Also, commit 158184ac9e changed these structs in 2012 but didn't catch all places where symbol bsym was being used to test for a local_symbol. * Makefile.am (HFILES): Delete struc-symbol.h. * doc/internals.texi: Delete struc-symbol.h reference and out of date local symbol description. * struc-symbol.h: Delete. Move contents to.. * symbols.c: ..here. (symbol_on_chain, symbol_symbolS): New functions. * symbols.h (symbol_on_chain, symbol_symbolS): Declare. * cgen.c: Don't #include struc-symbol.h. (gas_cgen_parse_operand): Don't test for local_symbol using bsym, instead call symbol_symbolS. Use symbol_get_bfdsym. (weak_operand_overflow_check, make_right_shifted_expr): Use symbol accessors. * config/obj-coff.c: Don't #include struc-symbol.h. (GET_FILENAME_STRING): Delete. * config/obj-elf.c: Don't #include struc-symbol.h. (elf_file_symbol): Use symbol accessors. (elf_adjust_symtab): Call symbol_on_chain. * config/obj-evax.c: Don't #include struc-symbol.h. * config/tc-nds32.c: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-alpha.c: Likewise. (add_to_link_pool, s_alpha_comm): Use symbol accessors. * config/tc-arc.c: Don't #include struc-symbol.h. (arc_check_relocs): Use symbol accessors, testing gas symbol section rather than bfd symbol section. * config/tc-avr.c: Don't #include struc-symbol.h. (avr_patch_gccisr_frag): Use symbol accessors. * config/tc-bfin.c: Don't #include struc-symbol.h. (bfin_loop_beginend): Use symbol accessors. * config/tc-csky.c: Don't #include struc-symbol.h. (v2_work_movih, v2_work_ori): Use symbol accessors. Check for absolute symbol as well as O_constant. * config/tc-riscv.c: Don't #include struc-symbol.h. (riscv_pre_output_hook): Use symbol accessors. * config/tc-s390.c: Don't #include struc-symbol.h. (s390_literals): Use symbol accessors. * config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use symbol accessors. (s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't test symbol bsym. * config/tc-score7.c: Don't #include struc-symbol.h. (s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors. (s7_b32_relax_to_b16): Don't test symbol bsym. * config/tc-sh.c: Don't #include struc-symbol.h. (insert_loop_bounds): Use symbol accessors. (sh_frob_section): Remove bogus symbol canonicalization. * config/tc-tic54x.c: Don't #include struc-symbol.h. (tic54x_bss): Use symbol accessors. * config/tc-tilegx.c: Don't #include struc-symbol.h. (emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors. * config/tc-tilepro.c: Don't #include struc-symbol.h. (emit_tilepro_instruction, tilepro_parse_name): Use accessors. * config/tc-xtensa.c: Don't #include struc-symbol.h. (xg_assemble_vliw_tokens): Use symbol accessors. (xg_order_trampoline_chain): Likewise. * ehopt.c: Don't #include struc-symbol.h. (check_eh_frame): Correct local symbol test. Use symbol accessors. * write.c: Don't #include struc-symbol.h. (create_note_reloc, maybe_generate_build_notes): Use symbol accessors. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-10-09[PATCH, BINUTULS, AARCH64, 9/9] Add SSBS to MSR/MRSSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds support for the mitigation for Spectre Variant 4 by adding the PSTATE bit SSBS which are accessible using MSR and MRS instructions. Although this is a mandatory addition to the ARMv8.5-A, it is permitted to be added to any version of the ARMv8 architecture. This is enabled using the command line option of +ssbs for older versions. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SSBS): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (operand_general_constraint_met_p): Add SSBS in the check for one-bit immediate. (aarch64_sys_regs): New entry for SSBS. (aarch64_sys_reg_supported_p): New check for above. (aarch64_pstatefields): New entry for SSBS. (aarch64_pstatefield_supported_p): New check for above. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "ssbs". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/ssbs-illegal1.d: New test. * testsuite/gas/aarch64/ssbs-illegal1.l: New test. * testsuite/gas/aarch64/ssbs-illegal2.d: New test. * testsuite/gas/aarch64/ssbs-illegal2.l: New test. * testsuite/gas/aarch64/ssbs.s: New test. * testsuite/gas/aarch64/ssbs1.d: Test with +ssbs * testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
2018-10-09[PATCH, BINUTILS, AARCH64, 6/9] Add Random number instructionsSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds the following: MSR Xn, RNDR MSR Xn, RNDRRS These are optional instructions in ARMv8.5-A and hence the new +rng is added. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_RNG): New. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_sys_regs): New entries for rndr and rndrrs. (aarch64_sys_reg_supported_p): New check for above. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): New "rng" option. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: Test both instructions. * testsuite/gas/aarch64/sysreg-4.d: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
2018-10-09[PATCH, BINUTILS, AARCH64, 4/9] Add Execution and Data Restriction instructionsSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the prediction restriction instructions (that is, cfp, dvp, cpp). These instructions are retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres which can be used by the older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default. (aarch64_opnd): Add AARCH64_OPND_SYSREG_SR. (aarch64_sys_regs_sr): Declare new table. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-dis.c (aarch64_ext_sysins_op): Add case for AARCH64_OPND_SYSREG_SR. * aarch64-opc.c (aarch64_print_operand): Likewise. (aarch64_sys_regs_sr): Define table. (aarch64_sys_ins_reg_supported_p): Check for RCTX with AARCH64_FEATURE_PREDRES. * aarch64-tbl.h (aarch64_feature_predres): New. (PREDRES, PREDRES_INSN): New. (aarch64_opcode_table): Add entries for cfp, dvp and cpp. (AARCH64_OPERANDS): Add new description for SYSREG_SR. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New. (parse_operands): Add entry for AARCH64_OPND_SYSREG_SR. (md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh with aarch64_sys_regs_sr. (aarch64_features): Add new "predres" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: New. * testsuite/gas/aarch64/sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.l: New. * testsuite/gas/aarch64/predres.s: New. * testsuite/gas/aarch64/predres.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 3/9] Add instruction SB for ARMv8.5-ASudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence a new command line option of "+sb" is added for older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SB): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_sb): New. (SB, SB_INSN): New. (aarch64_opcode_table): Add entry for sb. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "sb" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sb.s: New. * testsuite/gas/aarch64/sb.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 1/9] Add -march=armv8.5-a and related internal ↵Sudakshina Das1-1/+2
feature macros This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a. * doc/c-aarch64.texi: Add documentation for the same. *** include/ChnageLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_5): New. (AARCH64_ARCH_V8_5): New. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New. (ARMV8_5, V8_5_INSN): New.
2018-10-05[Arm, 3/3] Add Execution and Data Prediction instructions for AArch32Sudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the Execution and Data Prediction Restriction instructions (that is, cfprctx, dvprxtc, cpprctx). These are all aliases to MCR and are disassembled as such. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres for older versions of the architecture. *** include/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_PREDRES): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_predres): New. (insns): Add new cfprctx, dvprctx and cpprctx instructions. (arm_extensions): Add "predres". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/predres-bad.d: New test. * testsuite/gas/arm/predres-bad.l: New test. * testsuite/gas/arm/predres.s: New test. * testsuite/gas/arm/predres1.d: New test. * testsuite/gas/arm/predres2.d: New test.
2018-10-05[Arm, 2/3] Add instruction SB for AArch32Sudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the instruction SB. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new "+sb" for older archtectures. *** include/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_SB): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default. *** opcodes/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (arm_opcodes): Add sb. (thumb32_opcodes): Likewise. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_sb): New. (insns): Add new sb instruction. (arm_extensions): Add "sb". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/sb-bad.d: New test. * testsuite/gas/arm/sb-bad.l: New test. * testsuite/gas/arm/sb-thumb1.d: New test. * testsuite/gas/arm/sb-thumb2.d: New test. * testsuite/gas/arm/sb.s: New test. * testsuite/gas/arm/sb1.d: New test. * testsuite/gas/arm/sb2.d: New test.
2018-10-05[Arm, 1/3] Add -march=armv8.5-a and related internal feature macros to AArch32Sudakshina Das1-0/+1
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_archs): New entry for armv8.5-a. (cpu_arch_ver): Likewise. * doc/c-arm.texi: Add documentation for the same. * testsuite/gas/arm/attr-march-armv8_5-a.d: New. *** include/ChnageLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_V8_5A): New. (ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.
2018-10-05or1k: Add OpenRISC gas documentationStafford Horne5-0/+313
gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * doc/Makefile.am (CPU_DOCS): Add entry for OpenRISC. * doc/Makefile.in: Regenerated. * doc/all.texi: Set OPENRISC. * doc/as.texi: Document OpenRISC. * doc/c-or1k.texi: New file.
2018-09-17x86: Add -mvexwig=[0|1] option to assemblerH.J. Lu1-0/+10
Add -mvexwig=[0|1] option to x86 assembler to control how the assembler should encode the VEX.W bit in WIG VEX instructions. * gas/NEWS: Mention -mvexwig=[0|1] option. * config/tc-i386.c (vexwig): New. (build_vex_prefix): Set the VEX.W bit for -mvexwig=1 for WIG VEX instructions. (OPTION_MVEXWIG): New. (md_longopts): Add -mvexwig=. (md_parse_option): Handle OPTION_MVEXWIG. (md_show_usage): Show -mvexwig=[0|1]. * doc/c-i386.texi: Document -mvexwig=[0|1]. * testsuite/gas/i386/avx-wig.d: New file. * testsuite/gas/i386/avx-wig.s: Likewise. * testsuite/gas/i386/avx2-wig.d: Likewise. * testsuite/gas/i386/avx2-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.s: Likewise. * testsuite/gas/i386/i386.exp: Run avx-wig, avx2-wig, x86-64-avx-wig and x86-64-avx2-wig.
2018-08-31x86: Extend assembler to generate GNU property notesH.J. Lu1-0/+9
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED properties. If the assembly input contains no instructions, set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED property. Add a --enable-x86-used-note configure time option to set the default behavior. Set the default if the configure option is not used to "no". * NEWS: Mention -mx86-used-note=[no|yes]. * configure.ac: Add --enable-x86-used-note. Define DEFAULT_X86_USED_NOTE. * config.in: Regenerated. * configure: Likewise. * config/tc-i386.c (x86_isa_1_used): New. (x86_feature_2_used): Likewise. (x86_used_note): Likewise. (_i386_insn): Add has_regmmx, has_regxmm, has_regymm and has_regzmm. (build_modrm_byte): Set i.has_regmmx, i.has_regzmm. i.has_regymm and i.has_regxmm. (x86_cleanup): New function. (output_insn): Update x86_isa_1_used and x86_feature_2_used. (OPTION_X86_USED_NOTE): New. (md_longopts): Add -mx86-used-note=. (md_parse_option): Handle OPTION_X86_USED_NOTE. (md_show_usage): Display -mx86-used-note=. * config/tc-i386.h (x86_cleanup): New prototype. (md_cleanup): New. * doc/c-i386.texi: Document -mx86-used-note=.
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu1-1/+1
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu2-0/+24
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu2-0/+22
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu2-0/+22
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-08-11x86: Add CpuCMOV and CpuFXSRH.J. Lu1-3/+8
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686 on corresponding instructions. gas/ * config/tc-i386.c (cpu_arch): Add .cmov and .fxsr. (cpu_noarch): Add nocmov and nofxsr. * doc/c-i386.texi: Document cmov and fxsr. opcodes/ * i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS, CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS. (cpu_flags): Add CpuCMOV and CpuFXSR. * i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64, fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner5-0/+244
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-26PowerPC Improve support for Gekko & BroadwayAlex Chadwick2-6/+6
This is a relatively straightforward patch to improve support for the IBM Gekko and IBM Broadway processors. Broadway is functionally equivalent to the IBM 750CL, while Gekko's functionality is a subset of theirs. The patch simplifies this reality and adds -mgekko and -mbroadway as aliases for -m750cl. I didn't feel it was worth wasting a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of simplified mnemonics for special purpose register access. Notably, Broadway adds 4 additional IBAT and DBAT registers but these are not assigned sequential SPR numbers. gas/ * config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway. * doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway. * doc/c-ppc.texi (PowerPC-Opts): Likewise. * testsuite/gas/ppc/broadway.d, * testsuite/gas/ppc/broadway.s: New test for broadway. * testsuite/gas/ppc/ppc.exp: Run new test. include/ * opcode/ppc.h (PPC_OPCODE_750): Adjust comment. opcodes/ * ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway. (powerpc_init_dialect): Handle bfd_mach_ppc_750. * ppc-opc.c (insert_sprbat, extract_sprbat): New functions to support disjointed BAT. (powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR. (XSPRGQR_MASK, GEKKO, BROADWAY): Define. (powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-25Clarify doc for .arch/.cpuThomas Preud'homme1-2/+4
Documentation for .arch and .cpu directives currently says that it accepts the same name as -march/-mcpu command-line options respectively. However it only accept the architecture/CPU part of those options: it does not accept specifying an extension which is done via .arch_extension. This patch clarifies that the extension is not accepted. 2018-07-25 Thomas Preud'homme <thomas.preudhomme@linaro.org> gas/ * doc/c-arm.texi (.arch directive): Clarify that name must not include an extension. (.cpu directive): Likewise.
2018-07-20MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3aChenghua Xu2-0/+23
The MMI instruction set has been implemented in many Loongson processors. There is a lot of software optimized for MMI. This patch splits MMI from loongson2f/3a, and adds GAS and disassembler options for MMI instructions. 2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com> Maciej W. Rozycki <macro@mips.com> bfd/ * elfxx-mips.c (print_mips_ases): Add MMI extension. binutils/ * readelf.c (print_mips_ases): Add MMI extension. gas/ * NEWS: Mention MultiMedia extensions Instructions (MMI) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and OPTION_NO_LOONGSON_MMI. (md_longopts): Likewise. (mips_ases): Define availability for MMI. (mips_convert_ase_flags): Map ASE_LOONGSON_MMI to AFL_ASE_LOONGSON_MMI. (mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a. (md_show_usage): Add help for -mloongson-mmi and -mno-loongson-mmi. * doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi. * doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi, .set loongson-mmi and .set noloongson-mmi. * testsuite/gas/mips/loongson-2f.d: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-2f.s: Move mmi test to ... * testsuite/gas/mips/loongson-2f-mmi.s: Here. * testsuite/gas/mips/loongson-3a.d: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a.s: Move mmi test to ... * testsuite/gas/mips/loongson-3a-mmi.s: Here. * testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and loongson-3a-mmi tests. include/ * elf/mips.h (AFL_ASE_MMI): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI. * opcode/mips.h (ASE_LOONGSON_MMI): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add MMI to loongson2f and loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-mmi option. (print_mips_disassembler_options): Document -M loongson-mmi. * mips-opc.c (LMMI): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI instructions.
2018-07-02Fix use of "command line X" in binutils docThomas Preud'homme32-218/+218
Binutils documentation uses a mix of spelling for the compound word "command-line X". According to [1]: "Sometimes compound words are written separately (nail polish), sometimes with a hyphen (short-sighted) and sometimes as one word (eyelashes). Often new compounds are written as two separate words and, as they become more familiar, they are either connected with a hyphen (-) or made into one word." I think command-line X is common enough in our industry that the two workds command and line should be connected. Since command-line is more common than commandline, I propose to update binutils documentation to consistently use "command-line" when this is used as an adjective to a noun (eg. command-line argument, command-line switch, command-line option and command-line flag). I've left occurences of "the command line" as is. I've also left gdb, sim and readline alone and have only touched public documentation (texi and NEWS files). [1] http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * doc/bfdint.texi: Use command-line consistently when used in a compount word. * doc/bfdsumm.texi: Likewise. binutils/ * NEWS: Use command-line consistently when used in a compount word. * doc/binutils.texi: Likewise and fix trailing whitespace on same line. gas/ * NEWS: Use command-line consistently when used in a compount word. * doc/as.texi: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cris.texi: Likewise. * doc/c-epiphany.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-lm32.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-nios2.texi: Likewise. * doc/c-ppc.texi: Likewise. * doc/c-pru.texi: Likewise. * doc/c-rl78.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/c-visium.texi: Likewise. * doc/c-xstormy16.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/c-z8k.texi: Likewise. * doc/internals.texi: Likewise. gprof/ * gprof.texi: Use command-line consistently when used in a compount word. ld/ * NEWS: Use command-line consistently when used in a compount word. * ld.texinfo: Likewise. * ldint.texinfo: Likewise.
2018-06-21Regen doc/Makefile.inAlan Modra2-4/+4
Also make the automake strictness "foreign". My regeneration of the three doc/Makefile.in files already had --foreign in the automake invocation, so this just makes it explicit. bfd/ * doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign". * doc/Makefile.in: Regenerate. binutils/ * doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign". * doc/Makefile.in: Regenerate. gas/ * doc/Makefile.am (AUTOMAKE_OPTIONS): Add "foreign". * doc/Makefile.in: Regenerate. zlib/ * Makefile.in: Regenerate.
2018-06-20Change the ARM assembler's ADR and ADRl pseudo-ops so that they will only ↵Nick Clifton1-1/+16
set the bottom bit of imported thumb function symbols if the -mthumb-interwork option is active. For more information see the email thread starting here: https://www.sourceware.org/ml/binutils/2018-05/msg00348.html PR 21458 * tc-arm.c (do_adr): Only set the bottom bit of an imported thumb function symbol address if -mthumb-interwork is active. (do_adrl): Likewise. * doc/c-arm.texi: Update descriptions of the -mthumb-interwork option and the ADR and ADRL pseudo-ops. * NEWS: Mention the new behaviour of the ADR and ADRL pseudo-ops. * testsuite/gas/arm/pr21458.d: Add -mthumb-interwork option to assembler command line. * testsuite/gas/arm/adr.d: Likewise. * testsuite/gas/arm/adrl.d: Likewise.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi3-98/+196
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker2-0/+20
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton2-0/+20
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-06-08[arm][gas] Add support for Arm Cortex-A76kyrtka011-0/+1
This patch adds support to gas for -mcpu=cortex-a76 in the usual way. make check-gas passes without problems. 2018-06-08 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-arm.c (arm_cpus): Add Cortex-A76 entry. * doc/c-arm.texi (-mcpu): Document cortex-a76.
2018-06-08[AArch64][gas] Add support for Arm Cortex-A76kyrtka011-0/+1
This patch adds support to gas for -mcpu=cortex-a76 in the usual way. make check-gas passes without problems. 2018-06-08 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add Cortex-A76 entry. * doc/c-aarch64.texi (-mcpu): Document cortex-a76.
2018-05-30Add znver2 support.Amit Pawar1-2/+3
gas/ * config/tc-i386.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS. * doc/c-i386.texi : Document znver2. * gas/testsuite/gas/i386/arch-13.s: Updated for znver2. * gas/testsuite/gas/i386/arch-13.d: Updated. * gas/testsuite/gas/i386/arch-13-znver1.d: Updated. * gas/testsuite/gas/i386/arch-13-znver2.d: New file. * gas/testsuite/gas/i386/x86-64-arch-3.s: Updated for znver2. * gas/testsuite/gas/i386/x86-64-arch-3.d: Updated. * gas/testsuite/gas/i386/x86-64-arch-3-znver1.d: Updated. * gas/testsuite/gas/i386/x86-64-arch-3-znver2.d: New file. * gas/testsuite/gas/i386/i386.exp: Updated for new test. opcode/ * i386-gen.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS. * i386-init.h : Regenerated.
2018-05-18RISC-V: Add RV32E support.Jim Wilson1-1/+2
Kito Cheng <kito.cheng@gmail.com> Monk Chiang <sh.chiang04@gmail.com> bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Handle EF_RISCV_RVE. binutils/ * readelf.c (get_machine_flags): Handle EF_RISCV_RVE. gas/ * config/tc-riscv.c (rve_abi): New. (riscv_set_options): Add rve field. Initialize it. (riscv_set_rve) New function. (riscv_set_arch): Support 'e' ISA subset. (reg_lookup_internal): If rve, check register is available. (riscv_set_abi): New parameter rve. (md_parse_option): Pass new argument to riscv_set_abi. (riscv_after_parse_args): Call riscv_set_rve. If rve_abi, set EF_RISCV_RVE. * doc/c-riscv.texi (-mabi): Document new ilp32e argument. include/ * elf/riscv.h (EF_RISCV_RVE): New define.
2018-05-18Add support for the Freescale s12z processor.John Darrington5-0/+222
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-07Enable Intel MOVDIRI, MOVDIR64B instructionsH.J. Lu1-0/+3
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New file. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (Gva): New. (enum): Add PREFIX_0F38F8, PREFIX_0F38F9, MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). (OP_G): Handle va_mode. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Add cpumovdiri and cpumovdir64b. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-04-27Revert "Enable Intel MOVDIRI, MOVDIR64B instructions."Igor Tsimbalist1-3/+0
This reverts commit a914a7c95895161c99533d5919b8504b37ea54a0.
2018-04-26Enable Intel MOVDIRI, MOVDIR64B instructions.Igor Tsimbalist1-0/+3
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New test. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F38F8, PREFIX_0F38F9. (prefix_table): New instructions (see prefix above). Add Gva macro and handling in OP_G. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Likewise. (opcode_modifiers): Add AddrPrefixOpReg. (i386_opcode_modifier): Likewise. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-0/+9
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-04-20RISC-V: Add new option -mrelax/-mno-relax.Jim Wilson1-0/+9
gas/ * config/tc-riscv.c (options): Add OPTION_RELAX and OPTION_NO_RELAX. (md_longopts): New option -mrelax and -mno-relax. (md_parse_option): Handle -mrelax and -mno-relax. * doc/c-riscv.texi: Document for -mrelax and -mno-relax. * testsuite/gas/riscv/no-relax-reloc.d: New. * testsuite/gas/riscv/no-relax-reloc.s: New. * testsuite/gas/riscv/relax-reloc.d: New. * testsuite/gas/riscv/relax-reloc.s: New.
2018-04-17Enable Intel CLDEMOTE instruction.Igor Tsimbalist1-1/+2
gas/ * config/tc-i386.c (cpu_arch): Add .cldemote. * doc/c-i386.texi: Document cldemote/.cldemote. * testsuite/gas/i386/cldemote-intel.d: New. * testsuite/gas/i386/cldemote.d: Likewise. * testsuite/gas/i386/cldemote.s: Likewise. * testsuite/gas/i386/i386.exp: Run new tests. * testsuite/gas/i386/x86-64-cldemote-intel.d: New. * testsuite/gas/i386/x86-64-cldemote.d: Likewise. * testsuite/gas/i386/x86-64-cldemote.s: Likewise. * testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c NOP encoding that maps to cldemote. * testsuite/gas/i386/nops.d: Likewise. * testsuite/gas/i386/nops.s: Likewise. * testsuite/gas/i386/x86-64-nops.d: Likewise. * testsuite/gas/i386/x86-64-nops.s: Likewise. opcode/ * i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0, PREFIX_0F1C. * i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS, (cpu_flags): Add CpuCLDEMOTE. * i386-init.h: Regenerate. * i386-opc.h (enum): Add CpuCLDEMOTE, (i386_cpu_flags): Add cpucldemote. * i386-opc.tbl: Add cldemote. * i386-tbl.h: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra4-223/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra4-209/+0
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Enable Intel WAITPKG instructions.Igor Tsimbalist1-1/+2
Intel has disclosed a set of new instructions for Tremont processor. The spec is https://software.intel.com/en-us/intel-architecture-instruction-set-extensions-programming-reference This patch enables Intel WAITPKG instructions. gas/ * config/tc-i386.c (cpu_arch): Add WAITPKG. (cpu_noarch): Likewise. * doc/c-i386.texi: Document WAITPKG. * i386/i386.exp: Run WAITPKG tests. * testsuite/gas/i386/waitpkg-intel.d: New test. * testsuite/gas/i386/waitpkg.d: Likewise. * testsuite/gas/i386/waitpkg.s: Likewise. * testsuite/gas/i386/x86-64-waitpkg-intel.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6, PREFIX_MOD_1_0FAE_REG_6. (va_mode): New. (OP_E_register): Use va_mode. * i386-dis-evex.h (prefix_table): New instructions (see prefixes above). * i386-gen.c (cpu_flag_init): Add WAITPKG. (cpu_flags): Likewise. * i386-opc.h (enum): Likewise. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add umonitor, umwait, tpause. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra8-798/+19
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-03-14RISC-V: Add .insn support.Jim Wilson1-0/+241
gas/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * config/tc-riscv.c (opcode_name_list): New. (opcode_names_hash): Likewise. (init_opcode_names_hash): Likewise. (opcode_name_lookup): Likewise. (validate_riscv_insn): New argument length, and add new format which used in .insn directive. (md_begin): Refine hash table initialization logic into init_opcode_hash. (init_opcode_hash): New. (my_getOpcodeExpression): Parse opcode name for .insn. (riscv_ip): New argument hash, able to handle .insn directive. (s_riscv_insn): Handler for .insn directive. (riscv_pseudo_table): New entry for .insn. * doc/c-riscv.texi: Add documentation for .insn directive. * testsuite/gas/riscv/insn.d: Add testcase for .insn directive. * testsuite/gas/riscv/insn.s: Likewise. include/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * opcode/riscv.h (OP_MASK_FUNCT3): New. (OP_SH_FUNCT3): Likewise. (OP_MASK_FUNCT7): Likewise. (OP_SH_FUNCT7): Likewise. (OP_MASK_OP2): Likewise. (OP_SH_OP2): Likewise. (OP_MASK_CFUNCT4): Likewise. (OP_SH_CFUNCT4): Likewise. (OP_MASK_CFUNCT3): Likewise. (OP_SH_CFUNCT3): Likewise. (riscv_insn_types): Likewise. opcodes/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * riscv-opc.c (riscv_insn_types): New.
2018-03-07x86: Rewrite NOP generation for fill and alignmentH.J. Lu1-3/+4
Rewrite NOP generation for fill and code alignment by: 1. Add a 11-byte NOP with another 0x66 prefix. 2. Remove the multi-byte NOP entries which consist of 2 instructions. 3. Select proper NOPs based on ISA and processor tuning. 4. Generate multiple NOPs with the longer NOPs first followed by the shorter NOP. 5. Use jump for larger NOP padding: a. > 8 bytes (2 NOPs) in 16-bit mode. b. > 14 bytes (2 NOPs) for older processors. c. > 77 bytes (7 NOPs) for newer processors. 6. Update MAX_MEM_FOR_RS_ALIGN_CODE to 4095. PR gas/22874 * config/tc-i386.c (f32_5): Removed. (f32_8): Likewise. (f32_9): Likewise. (f32_10): Likewise. (f32_11): Likewise. (f32_12): Likewise. (f32_13): Likewise. (f32_14): Likewise. (f16_5): Likewise. (f16_6): Likewise. (f16_7): Likewise. (f16_8): Likewise. (jump_31): Likewise. (alt64_11): Likewise. (alt64_patt): Likewise. (jump_disp8): New. (jump32_disp32): Likewise. (jump16_disp32): Likewise. (alt_11): Likewise. (f32_patt): Updated. (f16_patt): Likewise. (alt_patt): Add alt_11. (i386_align_code): Merged with ... (i386_generate_nops): This. Rewritten. (fits_in_imm7): Moved before i386_generate_nops. (fits_in_imm31): Likewise. * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Updated to 4095. (i386_align_code): Removed. (HANDLE_ALIGN): Rewritten with i386_generate_nops. * doc/as.texinfo: Update limits of control byte for x86 .nops directive. * testsuite/gas/i386/i386.exp: Run nops-7 and x86-64-nops-7. * gas/testsuite/gas/i386/noavx-3.l: Updated. * gas/testsuite/gas/i386/nop-1.d: Likewise. * gas/testsuite/gas/i386/nop-1.s: Likewise. * gas/testsuite/gas/i386/nop-2.d: Likewise. * gas/testsuite/gas/i386/nop-2.s: Likewise. * gas/testsuite/gas/i386/nop-3.d: Likewise. * gas/testsuite/gas/i386/nop-4.d: Likewise. * gas/testsuite/gas/i386/nop-5.d: Likewise. * gas/testsuite/gas/i386/nop-5.s: Likewise. * gas/testsuite/gas/i386/nop-6.d: Likewise. * gas/testsuite/gas/i386/nop-bad-1.l: Likewise. * gas/testsuite/gas/i386/nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/nops-1-i386-i686.d: Likewise. * gas/testsuite/gas/i386/nops-1-i386.d: Likewise. * gas/testsuite/gas/i386/nops-1-i686.d: Likewise. * gas/testsuite/gas/i386/nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/nops-1.d: Likewise. * gas/testsuite/gas/i386/nops-2-core2.d: Likewise. * gas/testsuite/gas/i386/nops-2-i386.d: Likewise. * gas/testsuite/gas/i386/nops-2.d: Likewise. * gas/testsuite/gas/i386/nops-3-i386.d: Likewise. * gas/testsuite/gas/i386/nops-3-i686.d: Likewise. * gas/testsuite/gas/i386/nops-3.d: Likewise. * gas/testsuite/gas/i386/nops-4-i386.d: Likewise. * gas/testsuite/gas/i386/nops-4-i686.d: Likewise. * gas/testsuite/gas/i386/nops-4.d: Likewise. * gas/testsuite/gas/i386/nops-4a-i686.d: Likewise. * gas/testsuite/gas/i386/nops-5-i686.d: Likewise. * gas/testsuite/gas/i386/nops-5.d: Likewise. * gas/testsuite/gas/i386/nops-6.d: Likewise. * gas/testsuite/gas/i386/nops16-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-5.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-g64.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-pentium.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-3.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4-core2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-5-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-5.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-pentium.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-3.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-5.d: Likewise. * gas/testsuite/gas/i386/nops-7.d: New file. * gas/testsuite/gas/i386/nops-7.s: Likewise. * gas/testsuite/gas/i386/x86-64-nops-7.d: Likewise.
generated by cgit v1.1 at 2024-09-12 19:03:41 +0000