aboutsummaryrefslogtreecommitdiff
path: root/gas/doc
AgeCommit message (Collapse)AuthorFilesLines
2017-01-02Update year range in copyright notice of all files.Alan Modra64-66/+66
2016-12-31PRU GAS PortDimitar Dimitrov5-0/+185
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * config/obj-elf.c: Ditto. * configure.tgt: Ditto. * config/tc-pru.c: New file. * config/tc-pru.h: New file. * doc/Makefile.am: Add documentation for PRU GAS port. * doc/all.texi, Ditto. * doc/as.texinfo: Ditto. * doc/c-pru.texi: Document PRU GAS options. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. * testsuite/gas/pru/alu.s: Ditto. * testsuite/gas/pru/branch.d: Ditto. * testsuite/gas/pru/branch.s: Ditto. * testsuite/gas/pru/illegal.l: Ditto. * testsuite/gas/pru/illegal.s: Ditto. * testsuite/gas/pru/ldi.d: Ditto. * testsuite/gas/pru/ldi.s: Ditto. * testsuite/gas/pru/ldst.d: Ditto. * testsuite/gas/pru/ldst.s: Ditto. * testsuite/gas/pru/loop.d: Ditto. * testsuite/gas/pru/loop.s: Ditto. * testsuite/gas/pru/misc.d: Ditto. * testsuite/gas/pru/misc.s: Ditto. * testsuite/gas/pru/pru.exp: Ditto. * testsuite/gas/pru/pseudo.d: Ditto. * testsuite/gas/pru/pseudo.s: Ditto. * testsuite/gas/pru/warn_reglabel.l: Ditto. * testsuite/gas/pru/warn_reglabel.s: Ditto. * testsuite/gas/pru/xfr.d: Ditto. * testsuite/gas/pru/xfr.s: Ditto. * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-21Remove high bit set charactersAlan Modra1-1/+1
gas/ * doc/c-lm32.texi: Fix chars with high bit set. * testsuite/gas/bfin/vector2.s: Likewise. gold/ * arm.cc: Fix comment chars with high bit set. include/ * coff/pe.h: Fix comment chars with high bit set. * opcode/xgate.h: Likewise. ld/ * testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
2016-12-21Document character escape sequencesAlan Modra1-6/+7
PR gas/10946 * doc/as.texinfo (Chars): Document escape sequences.
2016-12-20Re-work RISC-V gas flags: now we just support -mabi and -marchAndrew Waterman2-18/+10
We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.
2016-12-05[ARM] Add ARMv8.3 command line option and feature flagSzabolcs Nagy1-0/+1
ARMv8.3 is an architectural extension of ARMv8. Add the feature macro and -march=armv8.3-a gas command line option for the ARM target. https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ * config/tc-arm.c (arm_archs): Add "armv8.3-a". * doc/c-arm.texi (-march): Add "armv8.3-a". include/ * opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New. (ARM_ARCH_V8_3A): New.
2016-12-02[ARC] Sync cpu names with the ones accepted by GCC.Claudiu Zissulescu1-0/+104
gas/ 2016-12-02 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/cpu-em-err.s: New file. * testsuite/gas/arc/cpu-em4-err.s: Likewise. * testsuite/gas/arc/cpu-fpuda-err.s: Likewise. * testsuite/gas/arc/cpu-hs-err.s: Likewise. * testsuite/gas/arc/cpu-quarkse-err.s: Likewise. * testsuite/gas/arc/noargs_a7.s: Add .cpu. * config/tc-arc.c (ARC_CPU_TYPE_A6xx): Define. (ARC_CPU_TYPE_A7xx): Likewise. (ARC_CPU_TYPE_AV2EM): Likewise. (ARC_CPU_TYPE_AV2HS): Likewise. (cpu_types): Update list of known CPU names. (arc_show_cpu_list): New function. (md_show_usage): Print accepted CPU names. (cl_features): New variable. (arc_select_cpu): Use cl_features. (arc_option): Allow various .cpu names. (md_parse_option): Set cl_features. * doc/c-arc.texi: Update -mcpu and .cpu documentation.
2016-11-21Use ACX_PROG_CMP_IGNORE_INITIAL in gasAlan Modra1-0/+1
* configure.ac: Invoke ACX_PROG_CMP_IGNORE_INITIAL. * Makefile.am (comparison): Rewrite using do_compare. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2016-11-11[AArch64] Add ARMv8.3 command line option and feature flagSzabolcs Nagy1-1/+1
ARMv8.3 can be selected with -march=armv8.3-a command line option. An overview of the ARMv8.3 architecture extension is at https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a". * doc/c-aarch64.texi (-march): Likewise. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define. (AARCH64_ARCH_V8_3): Define. (AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-04Add support for ARM Cortex-M33 processorThomas Preud'homme1-0/+1
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m33): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M33 processor. * NEWS: Mention ARM Cortex-M33 support.
2016-11-04Add support for ARM Cortex-M23 processorThomas Preud'homme1-0/+1
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m23): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M23 processor. * NEWS: Mention ARM Cortex-M23 support.
2016-11-04Update RISC-V documentation and make sure that it is included in the gas ↵Palmer Dabbelt5-4/+21
info file. * Makefile.am (CPU_DOCS): Add c-riscv.texi. * Makefile.in: Regenerate. * doc/all.texi: Set RISCV. * doc/as.texinfo: Add RISCV options. Add RISC-V-Dependent node. Include c-riscv.texi. * doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts.
2016-11-04New option falkor for Qualcomm server partSiddhesh Poyarekar2-0/+2
This adds an option for the Qualcomm falkor core, the corresponding gcc patch is here: https://gcc.gnu.org/ml/gcc-patches/2016-11/msg00262.html This was tested with aarch64 and armhf builds and make check and also by building and running SPEC2006. * config/tc-aarch64.c (aarch64_cpus): Add falkor. * config/tc-arm.c (arm_cpus): Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-arm.texi: Likewise.
2016-11-02Enable Intel AVX512_4VNNIW instructionsIgor Tsimbalist1-2/+4
gas/ * config/tc-i386.c: (cpu_arch) Add .avx512_4vnniw. (cpu_noarch): Add noavx512_4vnniw. * doc/c-i386.texi: Document avx512_4vnniw, noavx512_4vnniw. * testsuite/gas/i386/i386.exp: Run AVX512_4VNNIW tests. * testsuite/gas/i386/avx512_4vnniwd_vl-intel.d: New test. * testsuite/gas/i386/avx512_4vnniwd_vl.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd_vl.s: Ditto. * testsuite/gas/i386/avx512_4vnniwd-intel.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd.s: Ditto. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F3852, PREFIX_EVEX_0F3853. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4VNNIW_FLAGS, CPU_ANY_AVX512_4VNNIW_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_4VNNIW. * i386-opc.h (enum): (AVX512_4VNNIW): New. (i386_cpu_flags): Add cpuavx512_4vnniw. * i386-opc.tbl: Add Intel AVX512_4VNNIW instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2016-11-02Enable Intel AVX512_4FMAPS instructionsIgor Tsimbalist1-3/+5
gas/ * config/tc-i386.c (cpu_arch): Add .avx512_4fmaps. (cpu_noarch): Add noavx512_4fmaps. (process_operands): Handle implicit quad group. * doc/c-i386.texi: Document avx512_4fmaps, noavx512_4fmaps. * testsuite/gas/i386/i386.exp: Add AVX512_4FMAPS tests. * testsuite/gas/i386/avx512_4fmaps_vl-intel.d: New test. * testsuite/gas/i386/avx512_4fmaps_vl.d: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl.s: Ditto. * testsuite/gas/i386/avx512_4fmaps-intel.d: Ditto. * testsuite/gas/i386/avx512_4fmaps.d: Ditto. * testsuite/gas/i386/avx512_4fmaps.s: Ditto. * testsuite/gas/i386/avx512_4fmaps-warn.l: Ditto. * testsuite/gas/i386/avx512_4fmaps-warn.s: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl-warn.l: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl-warn.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.l: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.l: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.s: Ditto. opcodes/ * i386-dis.c. (enum): Add PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F38AA, PREFIX_EVEX_0F38AB. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4FMAPS_FLAGS, CPU_ANY_AVX512_4FMAPS_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_4FMAPS. (opcode_modifiers): Add ImplicitQuadGroup modifier. * i386-opc.h (AVX512_4FMAP): New. (i386_cpu_flags): Add cpuavx512_4fmaps. (ImplicitQuadGroup): New. (i386_opcode_modifier): Add implicitquadgroup. * i386-opc.tbl: Add Intel AVX512_4FMAPS instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2016-11-01Add support for RISC-V architecture.Nick Clifton2-0/+67
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-10-21X86: Remove pcommit instructionH.J. Lu1-2/+1
Remove x86 pcommit instruction support, which has been deprecated: https://software.intel.com/en-us/blogs/2016/09/12/deprecate-pcommit-instruction gas/ * config/tc-i386.c (cpu_arch): Remove .pcommit. * doc/c-i386.texi: Likewise. * testsuite/gas/i386/i386.exp: Remove pcommit tests. * testsuite/gas/i386/pcommit-intel.d: Removed. * testsuite/gas/i386/pcommit.d: Likewise. * testsuite/gas/i386/pcommit.s: Likewise. * testsuite/gas/i386/x86-64-pcommit-intel.d: Likewise. * testsuite/gas/i386/x86-64-pcommit.d: Likewise. * testsuite/gas/i386/x86-64-pcommit.s: Likewise. opcodes/ * i386-dis.c (PREFIX_RM_0_0FAE_REG_7): Removed. (prefix_table): Remove the PREFIX_RM_0_0FAE_REG_7 entry. (rm_table): Update the RM_0FAE_REG_7 entry. * i386-gen.c (cpu_flag_init): Remove CPU_PCOMMIT_FLAGS. (cpu_flags): Remove CpuPCOMMIT. * i386-opc.h (CpuPCOMMIT): Removed. (i386_cpu_flags): Remove cpupcommit. * i386-opc.tbl: Remove pcommit. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-09-29Add .cfi_val_offset GAS command.Andreas Krebbel1-0/+3
This patch adds support for .cfi_val_offset GAS pseudo command which maps to DW_CFA_val_offset and DW_CFA_val_offset_sf. gas/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * doc/as.texinfo: Add docu for .cfi_val_offset. * dw2gencfi.c (cfi_add_CFA_val_offset): New function. (dot_cfi): Add case for DW_CFA_val_offset. (output_cfi_insn): Likewise. (cfi_pseudo_table): Add entry for cfi_val_offset. * dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset. * testsuite/gas/cfi/cfi-common-8.d: New test. * testsuite/gas/cfi/cfi-common-8.s: New test. * testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase. binutils/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * dwarf.c (display_debug_frames): Adjust output line.
2016-09-26When building target binaries, ensure that the warning flags selected for ↵Vlad Zakharov1-0/+1
the command line match the target compiler. bfd * warning.m4 (AC_EGREP_CPP_FOR_BUILD): Introduce macro to verify CC_FOR_BUILD compiler. (AM_BINUTILS_WARNINGS): Introduce ac_cpp_for_build variable and add CC_FOR_BUILD compiler checks. * Makefile.in: Regenerate. * configure: Likewise. * doc/Makefile.in: Likewise. binutils * Makefile.am: Replace AM_CLFAGS with AM_CFLAGS_FOR_BUILD when building with CC_FOR_BUILD compiler. * Makefile.in: Regenerate. * configure: Likewise. * doc/Makefile.in: Likewise. gas * Makefile.in: Regenerate. * configure: Likewise. * doc/Makefile.in: Likewise. gold * Makefile.in: Regenerate. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof * Makefile.in: Regenerate. * configure: Likewise. ld * Makefile.in: Regenerate. * configure: Likewise. opcodes * Makefile.in: Regenerate. * configure: Likewise.
2016-09-21[AArch64][SVE 31/32] Add SVE instructionsRichard Sandiford1-0/+2
This patch adds the SVE instruction definitions and associated OP_* enum values. include/ * opcode/aarch64.h (AARCH64_FEATURE_SVE): New macro. (OP_MOV_P_P, OP_MOV_Z_P_Z, OP_MOV_Z_V, OP_MOV_Z_Z, OP_MOV_Z_Zi) (OP_MOVM_P_P_P, OP_MOVS_P_P, OP_MOVZS_P_P_P, OP_MOVZ_P_P_P) (OP_NOTS_P_P_P_Z, OP_NOT_P_P_P_Z): New aarch64_ops. opcodes/ * aarch64-tbl.h (OP_SVE_B, OP_SVE_BB, OP_SVE_BBBU, OP_SVE_BMB) (OP_SVE_BPB, OP_SVE_BUB, OP_SVE_BUBB, OP_SVE_BUU, OP_SVE_BZ) (OP_SVE_BZB, OP_SVE_BZBB, OP_SVE_BZU, OP_SVE_DD, OP_SVE_DDD) (OP_SVE_DMD, OP_SVE_DMH, OP_SVE_DMS, OP_SVE_DU, OP_SVE_DUD, OP_SVE_DUU) (OP_SVE_DUV_BHS, OP_SVE_DUV_BHSD, OP_SVE_DZD, OP_SVE_DZU, OP_SVE_HB) (OP_SVE_HMD, OP_SVE_HMS, OP_SVE_HU, OP_SVE_HUU, OP_SVE_HZU, OP_SVE_RR) (OP_SVE_RURV_BHSD, OP_SVE_RUV_BHSD, OP_SVE_SMD, OP_SVE_SMH, OP_SVE_SMS) (OP_SVE_SU, OP_SVE_SUS, OP_SVE_SUU, OP_SVE_SZS, OP_SVE_SZU, OP_SVE_UB) (OP_SVE_UUD, OP_SVE_UUS, OP_SVE_VMR_BHSD, OP_SVE_VMU_SD) (OP_SVE_VMVD_BHS, OP_SVE_VMVU_BHSD, OP_SVE_VMVU_SD, OP_SVE_VMVV_BHSD) (OP_SVE_VMVV_SD, OP_SVE_VMV_BHSD, OP_SVE_VMV_HSD, OP_SVE_VMV_SD) (OP_SVE_VM_SD, OP_SVE_VPU_BHSD, OP_SVE_VPV_BHSD, OP_SVE_VRR_BHSD) (OP_SVE_VRU_BHSD, OP_SVE_VR_BHSD, OP_SVE_VUR_BHSD, OP_SVE_VUU_BHSD) (OP_SVE_VUVV_BHSD, OP_SVE_VUVV_SD, OP_SVE_VUV_BHSD, OP_SVE_VUV_SD) (OP_SVE_VU_BHSD, OP_SVE_VU_HSD, OP_SVE_VU_SD, OP_SVE_VVD_BHS) (OP_SVE_VVU_BHSD, OP_SVE_VVVU_SD, OP_SVE_VVV_BHSD, OP_SVE_VVV_SD) (OP_SVE_VV_BHSD, OP_SVE_VV_HSD_BHS, OP_SVE_VV_SD, OP_SVE_VWW_BHSD) (OP_SVE_VXX_BHSD, OP_SVE_VZVD_BHS, OP_SVE_VZVU_BHSD, OP_SVE_VZVV_BHSD) (OP_SVE_VZVV_SD, OP_SVE_VZV_SD, OP_SVE_V_SD, OP_SVE_WU, OP_SVE_WV_BHSD) (OP_SVE_XU, OP_SVE_XUV_BHSD, OP_SVE_XVW_BHSD, OP_SVE_XV_BHSD) (OP_SVE_XWU, OP_SVE_XXU): New macros. (aarch64_feature_sve): New variable. (SVE): New macro. (_SVE_INSN): Likewise. (aarch64_opcode_table): Add SVE instructions. * aarch64-opc.h (extract_fields): Declare. * aarch64-opc-2.c: Regenerate. * aarch64-asm.c (do_misc_encoding): Handle the new SVE aarch64_ops. * aarch64-asm-2.c: Regenerate. * aarch64-dis.c (extract_fields): Make global. (do_misc_decoding): Handle the new SVE aarch64_ops. * aarch64-dis-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document the "sve" feature. * config/tc-aarch64.c (REG_TYPE_R_Z_BHSDQ_VZP): New register type. (get_reg_expected_msg): Handle it. (parse_operands): When parsing operands of an SVE instruction, disallow immediates that match REG_TYPE_R_Z_BHSDQ_VZP. (aarch64_features): Add an entry for SVE.
2016-09-14gas: detect DCTI couples in sparcJose E. Marchesi2-7/+24
Before SPARC V9 the effect of having a delayed branch instruction in the delay slot of a conditional delayed branch was undefined. In SPARC V9 DCTI couples are well defined. However, starting with the UltraSPARC Architecture 2005, DCTI couples (of all kind) are deprecated and should not be used, as they may be slow or behave differently to what the programmer expects. This patch adds a new command line option --dcti-couples-detect to `as', disabled by default, that makes the assembler to warn the user if an unpredictable DCTI couple is found. Tests and documentation are included. gas/ChangeLog: 2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (md_assemble): Detect and warning on unpredictable DCTI couples in certain arches. (dcti_couples_detect): New global. (md_longopts): Add command line option -dcti-couples-detect. (md_show_usage): Document -dcti-couples-detect. (md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests. * testsuite/gas/sparc/dcti-couples.s: New file. * testsuite/gas/sparc/dcti-couples-v9c.d: Likewise. * testsuite/gas/sparc/dcti-couples-v8.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9c.l: Likewise. * testsuite/gas/sparc/dcti-couples-v8.l: Likewise. * doc/as.texinfo (Overview): Document --dcti-couples-detect. * doc/c-sparc.texi (Sparc-Opts): Likewise.
2016-09-12S/390: Add alternate processor names.Andreas Krebbel2-16/+32
This patch adds alternate CPU names which adhere to the number of the architecture document. So instead of having z196, zEC12, and z13 you can use arch9, arch10, and arch11. The old cpu names stay valid and should primarily be used. The alternate names are supposed to improve compatibility with the IBM XL compiler toolchain which uses the arch numbering. opcodes/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Support alternate arch strings. gas/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): Support alternate arch strings. * doc/as.texinfo: Document new arch strings. * doc/c-s390.texi: Likewise.
2016-08-24X86: Add ptwrite instructionH.J. Lu1-0/+2
Implement ptwrite instruction defined in Intel64 and IA-32 Architectures Software Developer’s Manual, June 2016. gas/ * config/tc-i386.c (cpu_arch): Add .ptwrite. * doc/c-i386.texi: Document ptwrite and .ptwrite. * testsuite/gas/i386/i386.exp: Run ptwrite, ptwrite-intel, x86-64-ptwrite and x86-64-ptwrite-intel. * testsuite/gas/i386/ptwrite-intel.d: New file. * testsuite/gas/i386/ptwrite.d: Likewise. * testsuite/gas/i386/ptwrite.s: Likewise. * testsuite/gas/i386/x86-64-ptwrite-intel.d: Likewise. * testsuite/gas/i386/x86-64-ptwrite.d: Likewise. * testsuite/gas/i386/x86-64-ptwrite.s: Likewise. opcodes/ * i386-dis.c (PREFIX_MOD_0_0FAE_REG_4): New. (PREFIX_MOD_3_0FAE_REG_4): Likewise. (prefix_table): Add PREFIX_MOD_0_0FAE_REG_4 and PREFIX_MOD_3_0FAE_REG_4. (mod_table): Use PREFIX_MOD_0_0FAE_REG_4 and PREFIX_MOD_3_0FAE_REG_4. * i386-gen.c (cpu_flag_init): Add CPU_PTWRITE_FLAGS. (cpu_flags): Add CpuPTWRITE. * i386-opc.h (CpuPTWRITE): New. (i386_cpu_flags): Add cpuptwrite. * i386-opc.tbl: Add ptwrite instruction. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-1/+17
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-06-21Arc assembler: Convert nps400 from a machine type to an extension.Graham Markall2-4/+22
gas * config/tc-arc.c (check_cpu_feature, md_parse_option): Add nps400 option and feature. Add check for nps400 feature. Refactor existing checks to check subclass before feature enablement. (md_show_usage): Document flags for NPS-400 and add some other undocumented flags. (cpu_type): Remove nps400 CPU type entry (check_zol): Remove bfd_mach_arc_nps400 case. (md_show_usage): Add help on -mcpu=nps400. (cpu_types): Add entry for nps400 as arc700 plus nps400 extension set. * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and -fpuda flags. Document -mcpu=nps400. * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change expected flags to match ARC700 instead of NPS400. * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. * testsuite/gas/arc/nps-400-2.d: Likewise. * testsuite/gas/arc/nps-400-3.d: Likewise. * testsuite/gas/arc/nps-400-4.d: Likewise. * testsuite/gas/arc/nps-400-5.d: Likewise. * testsuite/gas/arc/nps-400-6.d: Likewise. * testsuite/gas/arc/nps-400-7.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to avoid clash with cbba instruction. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400 case. ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400. * testsuite/ld-arc/nps-1b.d: Likewise. include * opcode/arc.h: Add nps400 extension and instruction subclass. Remove ARC_OPCODE_NPS400 * elf/arc.h: Remove E_ARC_MACH_NPS400 opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length. Use same method for determining instruction length on ARC700 and NPS-400. (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions with the NPS400 subclass. * arc-opc.c: Likewise. bfd * archures.c: Remove bfd_mach_arc_nps400. * bfd-in2.h: Likewise. * cpu-arc.c (arch_info_struct): Likewise. * elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing): Likewise.
2016-06-13Accept vulcan as a cpu name for the AArch64 port of GAS.Virendra Pathak1-0/+1
* config/tc-aarch64.c (aarch64_cpus): Add Broadcom Vulcan. * doc/c-aarch64.texi: Document that vulcan is a valid processor name.
2016-06-07[ARM] Add command line option for RAS extension.Matthew Wahab1-0/+2
This patch adds the architecture extension "+ras" to enable RAS support. It is enabled by default for -march=armv8.2-a and available but disabled by default for armv8-a and armv8.1-a. gas/ * config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras. (arm_ext_ras): Renamed from arm_ext_v8_2. (insns): Update for arm_ext_v8_2 renaming. (arm_extensions): Add "ras". * doc/c-arm.texi (ARM Options): Add an entry for "ras". * testsuite/gas/arm/armv8-a+ras.d: New. * testsuite/gas/arm/armv8_2-a.d: Add explicit command line options. include/ * opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding entries. (ARM_AEXT_V8_2A): Add ARM_EXT2_RAS. opcodes/ * arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with ARM_EXT_RAS in relevant entries.
2016-06-03[AArch64][gas] Add support for Cortex-A73Kyrylo Tkachov1-0/+1
* config/tc-aarch64.c (aarch64_cpus): Add cortex-a73 entry. * doc/c-aarch64.texi (-mcpu): Document cortex-a73 value.
2016-06-03[ARM][gas] Add support for Cortex-A73Kyrylo Tkachov1-0/+1
* config/tc-arm.c (arm_cpus): Add cortex-a73 entry. * doc/c-arm.texi (-mcpu=): Document cortex-a73 value.
2016-05-29Add .noavx512XX directives to x86 assemblerH.J. Lu1-0/+9
Add .noavx512f, .noavx512cd, .noavx512er, .noavx512pf, .noavx512dq, .noavx512bw, .noavx512vl, .noavx512ifma, .noavx512vbmi directives to x86 assembler. gas/ PR gas/20145 * config/tc-i386.c (cpu_noarch): Add noavx512f, noavx512cd, noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma and noavx512vbmi. * doc/c-i386.texi: Mention noavx512f, noavx512cd, noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma and noavx512vbmi. * testsuite/gas/i386/i386.exp: Run noavx512-1 and noavx512-2. * testsuite/gas/i386/noavx512-1.l: New file. * testsuite/gas/i386/noavx512-1.s: Likewise. * testsuite/gas/i386/noavx512-2.l: Likewise. * testsuite/gas/i386/noavx512-2.s: Likewise. opcodes/ PR gas/20145 * i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS, CPU_ANY_AVX512CD_FLAGS, CPU_ANY_AVX512ER_FLAGS, CPU_ANY_AVX512PF_FLAGS, CPU_ANY_AVX512DQ_FLAGS, CPU_ANY_AVX512BW_FLAGS, CPU_ANY_AVX512VL_FLAGS, CPU_ANY_AVX512IFMA_FLAGS and CPU_ANY_AVX512VBMI_FLAGS. * i386-init.h: Regenerated.
2016-05-27Update x86 CPU_XXX_FLAGS handlingH.J. Lu1-1/+12
Support defining CPU_XXX_FLAGS with other CPU_XXX_FLAGS. Update CPU_XXX_FLAGS to enable more bits like x87 and SYSCALL. Don't enable MMX when enabling SSE, AVX or AVX512. Don't disable AVX nor AVX512 when disabling SSE. Don't disable AVX512 when disabling AVX. Disable F16C, FMA, FMA4 and XOP when disabling AVX. Add 87, no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2 directives to x86 assembler. TODO: Add more .noXXX, like .noavx512f, directives to x86 assembler. gas/ PR gas/20145 * config/tc-i386.c (cpu_arch): Add 687. (cpu_noarch): Add no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2. (parse_real_register): Check cpuregmmx instead of cpummx for MMX register. Check cpuregxmm instead of cpusse for XMM register. Check cpuregymm instead of cpuavx for YMM register. Check cpuregzmm/cpuregmask instead of cpuavx512f for ZMMM/mask register. * doc/c-i386.texi: Mention 687, no287, no387, no687, nosse2, nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2. * testsuite/gas/i386/arch-10-prefetchw.d (as): Add mmx. * testsuite/gas/i386/arch-10.d (as): Likewise. * testsuite/gas/i386/arch-11.s: Add ".arch .mmx". * testsuite/gas/i386/i386.exp: Pass mmx to assembler for arch-10-3 and arch-10-4. Run no87-3, nosse-4, nosse-5, noavx-3 and noavx-4. * testsuite/gas/i386/no87-3.l: New file. * testsuite/gas/i386/no87-3.s: Likewise. * testsuite/gas/i386/noavx-3.l: Likewise. * testsuite/gas/i386/noavx-3.s: Likewise. * testsuite/gas/i386/noavx-4.d: Likewise. * testsuite/gas/i386/noavx-4.s: Likewise. * testsuite/gas/i386/nosse-4.l: Likewise. * testsuite/gas/i386/nosse-4.s: Likewise. * testsuite/gas/i386/nosse-5.d: Likewise. * testsuite/gas/i386/nosse-5.s: Likewise. opcodes/ PR gas/20145 * i386-gen.c (cpu_flag_init): Update CPU_XXX_FLAGS. Remove CpuMMX from CPU_SSE_FLAGS. Remove AVX and AVX512 bits from CPU_ANY_SSE_FLAGS. Remove AVX512 bits from CPU_ANY_AVX_FLAGS. Add CPU_XSAVE_FLAGS to CPU_XSAVEOPT_FLAGS, CPU_XSAVE_FLAGS and CpuXSAVEC. Add CPU_AVX_FLAGS to CpuF16C. Remove CpuMMX from CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS, CPU_AVX512PF_FLAGS, CPU_AVX512DQ_FLAGS and CPU_AVX512BW_FLAGS. Add CPU_SSE2_FLAGS to CPU_SHA_FLAGS. Add CPU_ANY_287_FLAGS, CPU_ANY_387_FLAGS, CPU_ANY_687_FLAGS, CPU_ANY_SSE2_FLAGS, CPU_ANY_SSE3_FLAGS, CPU_ANY_SSSE3_FLAGS, CPU_ANY_SSE4_1_FLAGS, CPU_ANY_SSE4_2_FLAGS and CPU_ANY_AVX2_FLAGS. Enable CpuRegMMX for MMX. Enable CpuRegXMM for SSE, AVX and AVX512. Enable CpuRegYMM for AVX and AVX512VL, Enable CpuRegZMM and CpuRegMask for AVX512. (cpu_flags): Add CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM and CpuRegMask. (set_bitfield_from_cpu_flag_init): New function. (set_bitfield): Remove const on f. Call set_bitfield_from_cpu_flag_init to handle CPU_XXX_FLAGS. * i386-opc.h (CpuRegMMX): New. (CpuRegXMM): Likewise. (CpuRegYMM): Likewise. (CpuRegZMM): Likewise. (CpuRegMask): Likewise. (i386_cpu_flags): Add cpuregmmx, cpuregxmm, cpuregymm, cpuregzmm and cpuregmask. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-05-20MIPS: Add support for P6600Matthew Fortune1-0/+1
gas/ * config/tc-mips.c (mips_cpu_info_table): Update comment. Add p6600 entry. * doc/c-mips.texi: Document p6600 -march option.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune2-2/+26
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-05-10Enable Intel RDPID instruction.Alexander Fomin1-1/+2
This patch enables Intel RDPID instruction described in Intel64 and IA-32 Architectures Software Developer's Manual, April 2016. gas/ * config/tc-i386.c (cpu_arch): Add RDPID. * doc/c-i386.texi: Document RDPID. gas/testsuite/ * gas/i386/i386.exp: Run RDPID tests. * gas/i386/prefix.d: Adjust. * gas/i386/rdpid.s: New test. * gas/i386/rdpid.d: Ditto. * gas/i386/rdpid-intel.d: Ditto. * gas/i386/x86-64-rdpid.s: Ditto. * gas/i386/x86-64-rdpid.d: Ditto. * gas/i386/x86-64-rdpid-intel.d: Ditto. opcodes/ * i386-dis.c (prefix_table): Add RDPID instruction. * i386-gen.c (cpu_flag_init): Add RDPID flag. (cpu_flags): Add RDPID bitfield. * i386-opc.h (enum): Add RDPID element. (i386_cpu_flags): Add RDPID field. * i386-opc.tbl: Add RDPID instruction. * i386-init.h: Regenerate. * i386-tbl.h: Regenerate.
2016-05-04[ARC] Add SYNTAX_NOP and SYNTAX_1OP for extension instructionsClaudiu Zissulescu1-0/+6
gas/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP. (arc_extinsn): Handle new introduced syntax. * testsuite/gas/arc/textinsn1op.d: New file. * testsuite/gas/arc/textinsn1op.s: Likewise. * doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP. opcodes/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP. (arcExtMap_genOpcode): Likewise. * arc-opc.c (arg_32bit_rc): Define new variable. (arg_32bit_u6): Likewise. (arg_32bit_limm): Likewise. include/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (ARC_SYNTAX_1OP): Declare (ARC_SYNTAX_NOP): Likewsie. (ARC_OP1_MUST_BE_IMM): Update defined value. (ARC_OP1_IMM_IMPLIED): Likewise. (arg_32bit_rc, arg_32bit_u6, arg_32bit_limm): Declare.
2016-04-20gas/doc/arc: Add nps400 references into the documentationAndrew Burgess1-2/+8
Add nps400 to the list of acceptable values for the -mcpu command line switch, and to the .cpu directive. I've added an extra cross reference from -mcpu to .cpu to improve navigation of the documentation. gas/ChangeLog: * doc/c-arc.texi (ARC Options): Add nps400 to list of valus for -mcpu. Add cross reference to .cpu directive from -mcpu option. (ARC Directives): Add NPS400 to .cpu directive list.
2016-04-20[AArch64] Support RAS extension for ARMv8 onwards.Matthew Wahab1-0/+3
The RAS extension was introduced as part of the ARMv8.2 architecture where it is a required feature. It is also available as an optional feature for ARMv8 and ARMv8.1. In binutils, the RAS extension is currently enabled by default for -march=armv8.2-a but is not available for -march=armv8 or -march=armv8.1-a. This patch adds the feature extension '+ras' to enable the RAS extension for ARMv8 and ARMv8.1, it is disabled by default. gas/ 2016-04-20 Matthew Wahab <matthew.wahab@arm.com> * config/tc-aarch64.c (aarch64_features): Add "ras". * doc/c-aarch64.texi (AArch64 Extensions): Add "ras". * testsuite/gas/aarch64/armv8-ras-1.d: New. * testsuite/gas/aarch64/armv8-ras-1.s: New. * testsuite/gas/aarch64/illegal-ras-1.d: New. * testsuite/gas/aarch64/illegal-ras-1.s: New. Change-Id: I824fb9bc8cf846bcc03aa17a726efb1350d78b9d
2016-04-19.cfi_remember_state/.cfi_restore_state documentationMartin Galvan1-5/+48
* doc/as.texinfo (.cfi_remember_state, .cfi_restore_state): Improve documentation.
2016-04-15Regenerate Makefile.in/aclocal.m4 automake 1.11.6H.J. Lu1-29/+81
bfd/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. binutils/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gas/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gold/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. ld/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. opcodes/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise.
2016-04-12Add support for .extCondCode, .extCoreRegister and .extAuxRegister.Claudiu Zissulescu1-3/+79
gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textauxregister.d: New file. * testsuite/gas/arc/textauxregister.s: Likewise. * testsuite/gas/arc/textcondcode.d: Likewise. * testsuite/gas/arc/textcondcode.s: Likewise. * testsuite/gas/arc/textcoreregister.d: Likewise. * testsuite/gas/arc/textcoreregister.s: Likewise. * testsuite/gas/arc/textpseudoop.d: Likewise. * testsuite/gas/arc/textpseudoop.s: Likewise. * testsuite/gas/arc/ld2.d: Update test. * testsuite/gas/arc/st.d: Likewise. * testsuite/gas/arc/taux.d: Likewise. * doc/c-arc.texi (ARC Directives): Add .extCondCode, .extCoreRegister and .extAuxRegister documentation. * config/tc-arc.c (arc_extcorereg): New function. (md_pseudo_table): Add .extCondCode, .extCoreRegister and .extAuxRegister pseudo-ops. (extRegister_t): New type. (ext_condcode, arc_aux_hash): New global variable. (find_opcode_match): Check for extensions. (preprocess_operands): Likewise. (md_begin): Add aux registers in a hash. (assemble_insn): Update use arc_flags member. (tokenize_extregister): New function. (create_extcore_section): Likewise. * config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Increase to 10. (arc_flags): Delete code, add flgp. include/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (flag_class_t): Update. (ARC_OPCODE_NONE): Define. (ARC_OPCODE_ARCALL): Likewise. (ARC_OPCODE_ARCFPX): Likewise. (ARC_REGISTER_READONLY): Likewise. (ARC_REGISTER_WRITEONLY): Likewise. (ARC_REGISTER_NOSHORT_CUT): Likewise. (arc_aux_reg): Add cpu. opcodes/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format): Check for extension flags. (print_flags): New function. (print_insn_arc): Update for .extCondCode, .extCoreRegister and .extAuxRegister. * arc-ext.c (arcExtMap_coreRegName): Use LAST_EXTENSION_CORE_REGISTER. (arcExtMap_coreReadWrite): Likewise. (dump_ARC_extmap): Update printing. * arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag. (arc_aux_regs): Add cpu field. * arc-regs.h: Add cpu field, lower case name aux registers. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-04-12Add support for .extInstruction pseudo-op.Claudiu Zissulescu1-4/+91
gas/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textinsn-errors.d: New File. * testsuite/gas/arc/textinsn-errors.err: Likewise. * testsuite/gas/arc/textinsn-errors.s: Likewise. * testsuite/gas/arc/textinsn2op.d: Likewise. * testsuite/gas/arc/textinsn2op.s: Likewise. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * doc/c-arc.texi (ARC Directives): Add .extInstruction documentation. * config/tc-arc.c (arcext_section): New variable. (arc_extinsn): New function. (md_pseudo_table): Add .extInstruction pseudo op. (attributes_t): New type. (suffixclass, syntaxclass, syntaxclassmod): New constant structures. (find_opcode_match): Remove arc_num_opcodes. (md_begin): Likewise. (tokenize_extinsn): New function. (arc_set_ext_seg): Likewise. (create_extinst_section): Likewise. include/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (arc_num_opcodes): Remove. (ARC_SYNTAX_3OP, ARC_SYNTAX_2OP, ARC_OP1_MUST_BE_IMM) (ARC_OP1_IMM_IMPLIED, ARC_SUFFIX_NONE, ARC_SUFFIX_COND) (ARC_SUFFIX_FLAG): Define. (flags_none, flags_f, flags_cc, flags_ccf): Declare. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. opcodes/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf): Initialize. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. (arc_opcode arc_opcodes): Null terminate the array. (arc_num_opcodes): Remove. * arc-ext.h (INSERT_XOP): Define. (extInstruction_t): Likewise. (arcExtMap_instName): Delete. (arcExtMap_insn): New function. (arcExtMap_genOpcode): Likewise. * arc-ext.c (ExtInstruction): Remove. (create_map): Zero initialize instruction fields. (arcExtMap_instName): Remove. (arcExtMap_insn): New function. (dump_ARC_extmap): More info while debuging. (arcExtMap_genOpcode): New function. * arc-dis.c (find_format): New function. (print_insn_arc): Use find_format. (arc_get_disassembler): Enable dump_ARC_extmap only when debugging. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2016-04-07Update AArch64 documentation regarding architecture extensions.James Greenhalgh1-8/+10
* doc/c-aarch64.texi (Architecture Extensions): Add entry for LSE. Correct entry for RDMA. Alpha sort entries.
2016-03-18Update description of AArch64 assembler directives.Nick Clifton1-4/+41
gas * doc/c-aarch64.texi (AArch64 Directives): Add descriptions of .cpu, .dword, .even, .inst. .tlsdescadd, .tlsdesccall, .tlsdescldr and .xword directives.
2016-03-18Fix generation of as.1 manual page so that it can be converted to DocBook ↵Nick Clifton1-0/+2
format. gas * doc/as.texinfo: Place the target specific command line options into their own man page section. etc * texi2pod.pl: Add TARGET to the list of recognised man page sections.
2016-03-15Update x86 register name documentation.Ulrich Drepper1-7/+43
* doc/c-i386.texi (Register Naming): Update to details of the latest architecture version.
2016-03-07[ARM] Add support for Cortex-R8Thomas Preud'homme1-0/+1
2016-03-07 Andre Vieira <andre.simoesdiasvieira@arm.com> gas/ * config/tc-arm.c (arm_cpus): Add cortex-r8. * doc/c-arm.texi: Add cortex-r8.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+9
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-24[ARM][gas] Add support for Cortex-A32Kyrylo Tkachov1-0/+1
2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-arm.c (arm_cpus): Add entry for cortex-a32. * doc/c-arm.texi (ARM Options): Document cortex-a32.
2016-02-24[ARM][doc] Document cortex-a17 mcpu optionKyrylo Tkachov1-0/+1
2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * doc/c-arm.texi (ARM Options): Document cortex-a17.
2016-02-16Remove documentation of deleted function S_IS_EXTERN.Trevor Saunders1-4/+0
generated by cgit v1.1 at 2024-09-15 05:00:17 +0000