Age | Commit message (Collapse) | Author | Files | Lines |
|
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
mips64-linux-gnuabi64 +FAIL: readelf -S bintest
mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
mips64el-linux-gnuabi64 +FAIL: readelf -S bintest
mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
0000000000000000 R_MIPS_NONE *ABS*
0000000000000000 R_MIPS_NONE *ABS*
and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not
match even though ELF output produced is correct according to `readelf':
Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2
Type2: R_MIPS_64
Type3: R_MIPS_NONE
As a genuine bug this has to be handled separately.
Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk>
bfd/
* config.bfd: Add `mips64*el-*-linux*-gnuabi64' and
`mips64*-*-linux*-gnuabi64' targets.
binutils/
* testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64'
targets.
* testsuite/binutils-all/objcopy.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/binutils-all/remove-relocs-01.d: Likewise.
* testsuite/binutils-all/remove-relocs-04.d: Likewise.
* testsuite/binutils-all/remove-relocs-05.d: Likewise.
* testsuite/binutils-all/remove-relocs-06.d: Likewise.
gas/
* configure.ac: Handle `mips64*-linux-gnuabi64' targets.
* configure: Regenerate.
* testsuite/gas/mips/compact-eh-eb-7.d: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
ld/
* configure.tgt: Add `mips64*el-*-linux-gnuabi64' and
`mips64*-*-linux-gnuabi64' targets.
* testsuite/ld-undefined/undefined.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
* testsuite/ld-mips-elf/compact-eh6.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64'
targets.
|
|
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
|
|
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
|
|
Making target code depend on a host define like _AIX52 is never
correct, so out it goes. Also, sort some config.bfd entries a little
to make it more obvious there is a config difference between aix5.1
and aix5.2. These two changes should make no difference to anything
in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was
wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by
simply not running the tests.
include/
* coff/internal.h (C_WEAKEXT): Don't depend on _AIX52.
bfd/
* coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52.
(coff_classify_symbol): Likewise.
* config.bfd: Sort some entries.
gas/
* configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01].
* configure: Regenerate.
* testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run
for aix < 5.2.
|
|
|
|
This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was
applied unapproved.
|
|
This behavior is used by downstream toolchain since 2014.
We also set the default ABI for mips*-img-elf to O32.
The previous value is NO_ABI, which is not good default ABI.
We don't support mips64*-img* due to GCC doesn't support it,
and We believe that the multilib should be used for this case.
|
|
In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc,
The default output is set to r6 if the vendor is img,
It is ugly and should not be in upstream.
Let's revert it.
|
|
If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output
r6 objects by default.
The triples with vendor `img` should do same.
The examples include:
as xx.s -o xx.o
ld -r -b binary xx.dat -o xx.o
|
|
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
used as the cpu name in triple.
Let's recognize them by `mips*64*(el)`.
For 64bit Ports, like Debian's mips64el and mips64r6el ports,
`gnuabi64` is used as the abi section.
Let's use N64 abi by default for the triple with gnuabi64.
|
|
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
|
|
|
|
gas doesn't use anything from libopcodes (anymore?) - suppress linking
in that library.
|
|
gas doesn't use anything from libopcodes anymore - suppress linking in
that library.
|
|
acinclude.m4 to stop a potwntial configure time warning message.
|
|
gas uses ZSTD_compressStream2 which is only available with libzstd >=
1.4.0, leading to build errors when an older version is installed.
This patch updates the check libzstd presence to check its version is
>= 1.4.0. However, since gas seems to be the only component requiring
such a recent version this may imply that we disable ZSTD support for
all components although some would still benefit from an older
version.
I ran 'autoreconf -f' in all directories containing a configure.ac
file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed
several errors from autoheader in readline, as well as warnings in
intl, but they are unrelated to this patch.
This should fix some of the buildbots.
OK for trunk?
Thanks,
Christophe
|
|
ChangeLog:
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
gas/ChangeLog:
* NEWS: Document the new option.
* as.c (flag_compress_debug): Set default algorithm based
on the configure option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
ld/ChangeLog:
* NEWS: Document the new option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
* ldmain.c: Set default algorithm based
on the configure option.
|
|
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
|
|
Some components of GNU Binutils will pass "-Wstack-usage=262144" when
"GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage",
despite that related configuration part in bfd/warning.m4 handles the latest
Clang (15.0.0 as of this writing) as "GCC >= 5.0".
The option "-Wstack-usage" was ignored when the first version of Clang is
released but even this "ignoring" behavior is removed before Clang 4.0.0.
So, if we give Clang "-Wstack-usage=262144", it generates a warning, making
the build failure.
This commit checks "__clang__" macro to prevent adding the option if the
compiler is identified as Clang.
bfd/ChangeLog:
* warning.m4: Stop appending "-Wstack-usage=262144" option when
compiled with Clang.
* configure: Regenerate.
binutils/ChangeLog:
* configure: Regenerate.
gas/ChangeLog:
* configure: Regenerate.
gold/ChangeLog:
* configure: Regenerate.
gprof/ChangeLog:
* configure: Regenerate.
ld/ChangeLog:
* configure: Regenerate.
opcodes/ChangeLog:
* configure: Regenerate.
|
|
Until we update the recommended versions of autoconf/automake, files
should be regenerated with automake-1.15.1 and autoconf-2.69. That's
not because we think those versions are golden, and newer versions are
bad. It's simply because maintainers want to be able to update
configury files without trouble, and if someone regenerates files with
automake-1.16.5 then --enable-maintainer-mode builds will hit errors:
checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1,
configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:26: comes from Automake 1.16.5. You should recreate
configure.ac:26: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
Correcting this requires regenerating the files by hand.
|
|
|
|
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
|
|
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
|
|
Regenerate configure files with the unmodified autoconf 2.69 to remove
--runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gold/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
|
|
|
|
After commit d8af286fffa ("RISC-V: Drop the privileged spec v1.9
support.") has removed support for privileged spec v1.9, this removes
it from the documentation.
References: d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.")
gas/ChangeLog:
* configure: Regenerate.
* configure.ac: Remove reference to priv spec 1.9.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
|
|
While support for the privileged spec was added in a63375ac337
("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the
documentation has not been updated. Add 1.12 to the relevant
documentation.
References: a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12")
gas/ChangeLog:
* config/tc-riscv.c: Add 1.12 to the usage message.
* configure: Regenerate.
* configure.ac: Add 1.12 to the help/usage message.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
|
|
When configuring gas, I get:
config.status: error: cannot find input file: `doc/Makefile.in'
This is because configure is out-of-date, re-generate it.
Change-Id: Iaa5980c282900d9fd23b90f0df25bf8ba3676498
|
|
|
|
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
Zhensong Liu <liuzhensong@loongson.cn>
Weinan Liu <liuweinan@loongson.cn>
Xiaolin Tang <tangxiaolin@loongson.cn>
gas/
* Makefile.am: Add LoongArch.
* NEWS: Mention LoongArch support.
* config/loongarch-lex-wrapper.c: New.
* config/loongarch-lex.h: New.
* config/loongarch-lex.l: New.
* config/loongarch-parse.y: New.
* config/tc-loongarch.c: New.
* config/tc-loongarch.h: New.
* configure.ac: Add LoongArch.
* configure.tgt: Likewise.
* doc/as.texi: Likewise.
* doc/c-loongarch.texi: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
gas/testsuite/
* gas/all/gas.exp: Add LoongArch.
* gas/elf/elf.exp: Likewise.
* gas/loongarch/4opt_op.d: New.
* gas/loongarch/4opt_op.s: Likewise.
* gas/loongarch/fix_op.d: Likewise.
* gas/loongarch/fix_op.s: Likewise.
* gas/loongarch/float_op.d: Likewise.
* gas/loongarch/float_op.s: Likewise.
* gas/loongarch/imm_op.d: Likewise.
* gas/loongarch/imm_op.s: Likewise.
* gas/loongarch/jmp_op.d: Likewise.
* gas/loongarch/jmp_op.s: Likewise.
* gas/loongarch/load_store_op.d: Likewise.
* gas/loongarch/load_store_op.s: Likewise.
* gas/loongarch/loongarch.exp: Likewise.
* gas/loongarch/macro_op.d: Likewise.
* gas/loongarch/macro_op.s: Likewise.
* gas/loongarch/nop.d: Likewise.
* gas/loongarch/nop.s: Likewise.
* gas/loongarch/privilege_op.d: Likewise.
* gas/loongarch/privilege_op.s: Likewise.
* gas/loongarch/syscall.d: Likewise.
* gas/loongarch/syscall.s: Likewise.
* lib/gas-defs.exp: Add LoongArch.
|
|
(including sim/, which has no changelog.)
bfd/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
binutils/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
gas/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
gprof/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
ld/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
libctf/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
* Makefile.in: Regenerate.
opcodes/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
zlib/ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
* configure: Regenerate.
|
|
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
|
|
Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable
elf attributes for all riscv targets by default in gcc. Therefore, I
think binutils should have the same behavior, in case users are writing
assembly files. If --enable-default-riscv-attribute isn't set, then we
enable the elf attributes for all riscv targets by default.
ChangLog:
binutils/
* testsuite/binutils-all/readelf.s: Add comments for riscv.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
* configure.ac: If --enable-default-riscv-attribute isn't set,
then we enable the elf attributes for all riscv targets by
default.
* configure: Regenerated.
|
|
|
|
Also remove alloca stuff since we don't use alloca in gas nowadays.
* configure.ac: Don't check for string.h, strings.h, stdlib.h,
errno.h, limits.h, locale.h or time.h. Don't check for unlink,
remove, sbrk (unused) or setlocale. Adjust gas_test_headers.
Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv
strstr, or vsnprintf declarations.
(AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke.
* as.h: Don't include alloca-conf.h, include config.h instead.
Include string.h, stdlib.h, errno.h unconditionally. Remove
various fallback declarations.
* asintl.h: Don't test HAVE_LOCALE_H.
* as.c: Don't test HAVE_SETLOCALE.
* dwarf2dbg.c: Include limits.h unconditionally.
* expr.c: Likewise.
* sb.c: Likewise.
* symbols.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-d30v.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
|
|
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
Compiling binutils using -flto=jobserver with GCC 11 leads to
libtool: link: gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Wwrite-strings -I../../gas/../zlib -g -O2 -fprofile-generate -flto=jobserver -o as-new app.o as.o atof-generic.o compress-debug.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o remap.o sb.o stabs.o subsegs.o symbols.o write.o config/tc-i386.o config/obj-elf.o config/atof-ieee.o ../opcodes/.libs/libopcodes.a ../bfd/.libs/libbfd.a -L/tmp/binutils-gdb/objdir/zlib -lz ../libiberty/libiberty.a -ldl
lto-wrapper: warning: jobserver is not available: '--jobserver-auth=' is not present in 'MAKEFLAGS'
since the '+' is missing on the recipe line in Makefiles generated by
automake. Add the '+' to the recipe line by hand.
bfd/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
binutils/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
config/
PR binutils/26792
* jobserver.m4: New file.
gas/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
gprof/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
ld/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
libctf/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
opcodes/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
|
|
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
bfd/
PR ld/27173
binutils/
PR ld/27173
* configure: Regenerated.
gas/
PR ld/27173
* configure: Regenerated.
gprof/
PR ld/27173
* configure: Regenerated.
ld/
PR ld/27173
* configure: Regenerated.
libctf/
PR ld/27173
* configure: Regenerated.
opcodes/
PR ld/27173
* configure: Regenerated.
|
|
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO
build.
bfd/
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
libctf/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
|
|
|
|
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
|
|
47a889a4ca20 ("Improve GNU/Hurd support.") fixed detection of shlibpath_overrides_runpath, thus avoiding unnecessary relink. This backports it.
. * libtool.m4: Match gnu* along other GNU systems.
*/ChangeLog:
* configure: Re-generate.
|
|
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
* configure.ac: Configure with --enable-x86-used-note by default
for Linux/x86.
* configure: Regenerated.
|
|
|
|
extensions and CSR
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
|
|
|
|
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
|
|
|
|
bfd/
* Makefile.in: Regenerate.
* configure: Regenerate.
binutils/
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
|