| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fINIT-2
|
|
- AC_AIX, AC_MINIX, and AC_GNU_SOURCE by AC_USE_SYSTEM_EXTENSIONS
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fAIX
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fMINIX-1
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fGNU_005fSOURCE-1
|
|
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
|
|
This behavior is used by downstream toolchain since 2014,
and has been in GCC since the same year.
We don't support mips64*-img* due to GCC doesn't support it,
and we believe that the multilib should be used for this case.
|
|
|
|
This reverts commit f3d38d7d0b7346515ba603454feeddc58a3fc451.
|
|
The new Synopsys ARCv3 ISA has a similar instruction format like
the old ARCv1 and ARCv2 ISA. Thus, the ARCv3 addition is using
whatever we have for old ARC processors plus some ARCv3 spcific mods.
To distinguish between various ARC variants, we introduced two new
configure defines named TARGET_ARCv3_32 and TARGET_ARCv3_64 which are
set when we choose either an ARC32 (ARCv3/32) ISA toolchain or an
ARC64 (ARCv3/64) ISA toolchain.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* gas/config/tc-arc.h: Selectively define default target macros.
* gas/configure.ac: Add ARC64 target.
* gas/configure.tgt: Likewise.
* gas/configure: Regenerate
* gas/config.in: Regenerate.
* gas/config/tc-arc.c (DEFAULT_ARCH): New macro.
(default_arch): New variable.
(md_pseudo_table): Add xword.
(md_shortopts): Only a few options are recognized by the new ARC64
assembler.
(md_longopts): Likewise.
(ARC_CPU_TYPE_A64x): New define.
(ARC_CPU_TYPE_A32x): Likewise.
(cpu_type): New arch field.
(selected_cpu): Update fields.
(arc_opcode_hash_entry_iterator_init): Formating.
(arc_opcode_hash_entry_iterator_next): Likewise.
(arc_select_cpu): Likewise.
(arc_option): Likewise.
(check_cpu_feature): Likewise.
(debug_exp): Recognize new expression operands.
(parse_reloc_symbol): Parse new signed/unsigend cases.
(parse_opcode_flags): Update for the case when the flags needs
insert/extract functions.
(find_opcode_match): Match new signed/unsigned 32-bit immediates.
(autodetect_attributes): PLT34 only available for ARC64.
(md_assemble): Extend match characters.
(declare_fp_set): New function.
(init_default_arch): Likewise.
(md_begin): Detect and initialize the correct CPU and coresponding
registers.
(md_pcrel_from_section): Add new relocs.
(arc_target_format): New function.
(md_apply_fix): Add new relocs.
(md_parse_option): Update options.
(arc_show_cpu_list): Update with ARC64 cpus.
(md_show_usage): Update messages.
(may_relax_expr): Add PLT34 case.
(assemble_insn): Update for ARC64.
(arc_make_nops): New function.
(arc_handle_align): Refurbish this function, use arc_make_nops.
(tc_arc_fix_adjustable): Update messages.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
|
|
This reverts commit 025e84f93566c8ced594ef48ddee1dec7e5b4cdd. It was
applied unapproved.
|
|
Following the arrangement in GCC select a 64-bit ABI by default, either
n32 or n64, rather than o32 for `mipsisa64*-*-linux*' targets, just as
with the corresponding `mips64*-*-linux*' targets.
|
|
|
|
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d.
See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
|
|
|
|
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
mips64-linux-gnuabi64 +FAIL: readelf -S bintest
mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
mips64el-linux-gnuabi64 +FAIL: readelf -S bintest
mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
0000000000000000 R_MIPS_NONE *ABS*
0000000000000000 R_MIPS_NONE *ABS*
and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not
match even though ELF output produced is correct according to `readelf':
Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2
Type2: R_MIPS_64
Type3: R_MIPS_NONE
As a genuine bug this has to be handled separately.
Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk>
bfd/
* config.bfd: Add `mips64*el-*-linux*-gnuabi64' and
`mips64*-*-linux*-gnuabi64' targets.
binutils/
* testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64'
targets.
* testsuite/binutils-all/objcopy.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/binutils-all/remove-relocs-01.d: Likewise.
* testsuite/binutils-all/remove-relocs-04.d: Likewise.
* testsuite/binutils-all/remove-relocs-05.d: Likewise.
* testsuite/binutils-all/remove-relocs-06.d: Likewise.
gas/
* configure.ac: Handle `mips64*-linux-gnuabi64' targets.
* configure: Regenerate.
* testsuite/gas/mips/compact-eh-eb-7.d: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
ld/
* configure.tgt: Add `mips64*el-*-linux-gnuabi64' and
`mips64*-*-linux-gnuabi64' targets.
* testsuite/ld-undefined/undefined.exp: Handle
`mips64*-*-*-gnuabi64' targets.
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
* testsuite/ld-mips-elf/compact-eh6.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64'
targets.
|
|
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
|
|
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
|
|
Making target code depend on a host define like _AIX52 is never
correct, so out it goes. Also, sort some config.bfd entries a little
to make it more obvious there is a config difference between aix5.1
and aix5.2. These two changes should make no difference to anything
in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was
wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by
simply not running the tests.
include/
* coff/internal.h (C_WEAKEXT): Don't depend on _AIX52.
bfd/
* coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52.
(coff_classify_symbol): Likewise.
* config.bfd: Sort some entries.
gas/
* configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01].
* configure: Regenerate.
* testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run
for aix < 5.2.
|
|
This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was
applied unapproved.
|
|
This behavior is used by downstream toolchain since 2014.
We also set the default ABI for mips*-img-elf to O32.
The previous value is NO_ABI, which is not good default ABI.
We don't support mips64*-img* due to GCC doesn't support it,
and We believe that the multilib should be used for this case.
|
|
In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc,
The default output is set to r6 if the vendor is img,
It is ugly and should not be in upstream.
Let's revert it.
|
|
If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output
r6 objects by default.
The triples with vendor `img` should do same.
The examples include:
as xx.s -o xx.o
ld -r -b binary xx.dat -o xx.o
|
|
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
used as the cpu name in triple.
Let's recognize them by `mips*64*(el)`.
For 64bit Ports, like Debian's mips64el and mips64r6el ports,
`gnuabi64` is used as the abi section.
Let's use N64 abi by default for the triple with gnuabi64.
|
|
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
gas doesn't use anything from libopcodes (anymore?) - suppress linking
in that library.
|
|
gas doesn't use anything from libopcodes anymore - suppress linking in
that library.
|
|
ChangeLog:
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
gas/ChangeLog:
* NEWS: Document the new option.
* as.c (flag_compress_debug): Set default algorithm based
on the configure option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
ld/ChangeLog:
* NEWS: Document the new option.
* configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
* configure: Regenerate.
* config.in: Likewise.
* ldmain.c: Set default algorithm based
on the configure option.
|
|
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
|
|
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
|
|
After commit d8af286fffa ("RISC-V: Drop the privileged spec v1.9
support.") has removed support for privileged spec v1.9, this removes
it from the documentation.
References: d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.")
gas/ChangeLog:
* configure: Regenerate.
* configure.ac: Remove reference to priv spec 1.9.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
|
|
While support for the privileged spec was added in a63375ac337
("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the
documentation has not been updated. Add 1.12 to the relevant
documentation.
References: a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12")
gas/ChangeLog:
* config/tc-riscv.c: Add 1.12 to the usage message.
* configure: Regenerate.
* configure.ac: Add 1.12 to the help/usage message.
* po/fr.po: Same.
* po/ru.po: Same.
* po/uk.po: Same.
|
|
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
|
|
This avoids a recursive make into the doc subdir and speeds up the
build slightly. It also allows for more parallelism.
|
|
|
|
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
Zhensong Liu <liuzhensong@loongson.cn>
Weinan Liu <liuweinan@loongson.cn>
Xiaolin Tang <tangxiaolin@loongson.cn>
gas/
* Makefile.am: Add LoongArch.
* NEWS: Mention LoongArch support.
* config/loongarch-lex-wrapper.c: New.
* config/loongarch-lex.h: New.
* config/loongarch-lex.l: New.
* config/loongarch-parse.y: New.
* config/tc-loongarch.c: New.
* config/tc-loongarch.h: New.
* configure.ac: Add LoongArch.
* configure.tgt: Likewise.
* doc/as.texi: Likewise.
* doc/c-loongarch.texi: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
gas/testsuite/
* gas/all/gas.exp: Add LoongArch.
* gas/elf/elf.exp: Likewise.
* gas/loongarch/4opt_op.d: New.
* gas/loongarch/4opt_op.s: Likewise.
* gas/loongarch/fix_op.d: Likewise.
* gas/loongarch/fix_op.s: Likewise.
* gas/loongarch/float_op.d: Likewise.
* gas/loongarch/float_op.s: Likewise.
* gas/loongarch/imm_op.d: Likewise.
* gas/loongarch/imm_op.s: Likewise.
* gas/loongarch/jmp_op.d: Likewise.
* gas/loongarch/jmp_op.s: Likewise.
* gas/loongarch/load_store_op.d: Likewise.
* gas/loongarch/load_store_op.s: Likewise.
* gas/loongarch/loongarch.exp: Likewise.
* gas/loongarch/macro_op.d: Likewise.
* gas/loongarch/macro_op.s: Likewise.
* gas/loongarch/nop.d: Likewise.
* gas/loongarch/nop.s: Likewise.
* gas/loongarch/privilege_op.d: Likewise.
* gas/loongarch/privilege_op.s: Likewise.
* gas/loongarch/syscall.d: Likewise.
* gas/loongarch/syscall.s: Likewise.
* lib/gas-defs.exp: Add LoongArch.
|
|
Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable
elf attributes for all riscv targets by default in gcc. Therefore, I
think binutils should have the same behavior, in case users are writing
assembly files. If --enable-default-riscv-attribute isn't set, then we
enable the elf attributes for all riscv targets by default.
ChangLog:
binutils/
* testsuite/binutils-all/readelf.s: Add comments for riscv.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
* configure.ac: If --enable-default-riscv-attribute isn't set,
then we enable the elf attributes for all riscv targets by
default.
* configure: Regenerated.
|
|
Also remove alloca stuff since we don't use alloca in gas nowadays.
* configure.ac: Don't check for string.h, strings.h, stdlib.h,
errno.h, limits.h, locale.h or time.h. Don't check for unlink,
remove, sbrk (unused) or setlocale. Adjust gas_test_headers.
Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv
strstr, or vsnprintf declarations.
(AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke.
* as.h: Don't include alloca-conf.h, include config.h instead.
Include string.h, stdlib.h, errno.h unconditionally. Remove
various fallback declarations.
* asintl.h: Don't test HAVE_LOCALE_H.
* as.c: Don't test HAVE_SETLOCALE.
* dwarf2dbg.c: Include limits.h unconditionally.
* expr.c: Likewise.
* sb.c: Likewise.
* symbols.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-d30v.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
|
|
A number of targets, bfin, rl78, rx, can show odd failures when
bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a
build dir with existing objects. The problem is caused by
bfin-parse.o and similar not being recompiled and so using stale
BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on
bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have
been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c
BFD_RELOC_* values change, but that wasn't happening. The problem is
that automake generates a makefile that loads gas/config/.deps/
dependency file for objects with corresponding sources mentioned in
EXTRA_as_new_SOURCES. Unless we want to mess around generating
explicit dependencies, I think that mean moving some object files to
the build gas/config/. This patch does that, removing some hacks for
m68k-parse.c that should no longer be necessary, and removes some
rules that catered to old bison producing code that triggers compiler
warnings.
PR 23691
* Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c..
(TARGET_CPU_HFILES): ..and config/xtensa-relax.h..
(TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c,
and use alongside TARGET_CPU_CFILES.
(EXTRA_DIST): Update location of generated .c files.
(config/m68k-parse.c): New rule replacing m68k-parse.c rule.
(config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c),
(config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly.
(itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed
dependencies.
(itbl-parse.@OBJEXT@): Delete rule using NO_WERROR.
(itbl-parse.c, itbl-parse.h): Tidy.
* config/bfin-lex-wrapper.c: Include config/bfin-lex.c.
* config/bfin-lex.l: Include config/bfin-parse.h.
* configure.ac (extra_objects): Move object files corresponding
to .y and .l files now in config/ to config/.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
|
|
Compiling binutils using -flto=jobserver with GCC 11 leads to
libtool: link: gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Wwrite-strings -I../../gas/../zlib -g -O2 -fprofile-generate -flto=jobserver -o as-new app.o as.o atof-generic.o compress-debug.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o remap.o sb.o stabs.o subsegs.o symbols.o write.o config/tc-i386.o config/obj-elf.o config/atof-ieee.o ../opcodes/.libs/libopcodes.a ../bfd/.libs/libbfd.a -L/tmp/binutils-gdb/objdir/zlib -lz ../libiberty/libiberty.a -ldl
lto-wrapper: warning: jobserver is not available: '--jobserver-auth=' is not present in 'MAKEFLAGS'
since the '+' is missing on the recipe line in Makefiles generated by
automake. Add the '+' to the recipe line by hand.
bfd/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
binutils/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
config/
PR binutils/26792
* jobserver.m4: New file.
gas/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
gprof/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
ld/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
libctf/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
opcodes/
PR binutils/26792
* configure.ac: Use GNU_MAKE_JOBSERVER.
* aclocal.m4: Regenerated.
* configure: Likewise.
|
|
|
|
* configure.ac: Configure with --enable-x86-used-note by default
for Linux/x86.
* configure: Regenerated.
|
|
extensions and CSR
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
|
|
|
|
This patch adds a port for the Linux kernel eBPF to the GNU assembler.
A testsuite and documentation updates are included.
gas/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac: Handle bpf-*-* targets.
* configure.tgt (generic_target): Likewise.
* configure: Regenerate.
* Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c.
(TARGET_CPU_HFILES): Add tc-bpf.h.
* Makefile.in: Regenerated.
* config/tc-bpf.c: New file.
* config/tc-bpf.h: Likewise.
* doc/Makefile.am (CPU_DOCS): Add c-bpf.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: set BPF.
* doc/as.texi: Add eBPF contents.
* doc/c-bpf.texi: New file.
* testsuite/gas/bpf/alu.d: New file.
* testsuite/gas/bpf/mem-be.d: Likewise.
* testsuite/gas/bpf/mem.s: Likewise.
* testsuite/gas/bpf/mem.d: Likewise.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.s: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/jump-be.d: Likewise.
* testsuite/gas/bpf/jump.s: Likewise.
* testsuite/gas/bpf/jump.d: Likewise.
* testsuite/gas/bpf/exit-be.d: Likewise.
* testsuite/gas/bpf/exit.s: Likewise.
* testsuite/gas/bpf/exit.d: Likewise.
* testsuite/gas/bpf/call-be.d: Likewise.
* testsuite/gas/bpf/call.s: Likewise.
* testsuite/gas/bpf/call.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Likewise.
* testsuite/gas/bpf/atomic-be.d: Likewise.
* testsuite/gas/bpf/atomic.s: Likewise.
* testsuite/gas/bpf/atomic.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32-be.d: Likewise.
* testsuite/gas/bpf/alu32.s: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
* testsuite/gas/bpf/alu.s: Likewise.
* testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF.
* testsuite/gas/all/org-1.s: Support nop_type 6.
* testsuite/gas/all/org-1.l: Updated to reflect changes in
org-1.s.
|
|
* NEWS: Mention -m[no-]fix-loongson3-llsc.
* configure.ac: Add --enable-mips-fix-loongson3-llsc.
Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC.
* config.in: Regenerated.
* configure: Likewise.
* config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc):
New variables.
(options): New OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_longopts): Add -m[no-]fix-loongson3-llsc.
(md_begin): Initialize sync insn.
(fix_loongson3_llsc): New.
(append_insn): Call fix_loongson3_llsc.
(md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_show_usage): Display -m[no-]fix-loongson3-llsc.
* doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc,
--enable-mips-fix-loongson3-llsc=[yes|no].
|
|
* configure.ac (ac_checking): Set from bfd/development.sh
development variable.
* configure: Regenerate.
|
|
2019-01-16 Kito Cheng <kito@andestech.com>
Nelson Chu <nelson@andestech.com>
bfd/
* elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New.
(elf_backend_obj_attrs_vendor): Define.
(elf_backend_obj_attrs_section_type): Likewise.
(elf_backend_obj_attrs_section): Likewise.
(elf_backend_obj_attrs_arg_type): Define as
riscv_elf_obj_attrs_arg_type.
* elfxx-riscv.c (riscv_estimate_digit): New.
(riscv_estimate_arch_strlen1): Likewise.
(riscv_estimate_arch_strlen): Likewise.
(riscv_arch_str1): Likewise.
(riscv_arch_str): Likewise.
* elfxx-riscv.h (riscv_arch_str): Declare.
binutils/
* readelf.c (get_riscv_section_type_name): New function.
(get_section_type_name): Add handler for RISC-V.
(riscv_attr_tag_t): Declare.
(riscv_attr_tag): New.
(display_riscv_attribute): New function.
(process_attributes): Add handler for RISC-V.
* testsuite/binutils-all/strip-3.d: Remove .riscv.attribute
section.
gas/
* config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined.
(riscv_set_options): Add `arch_attr` field.
(riscv_opts): Set default value for arch_attr.
(riscv_write_out_arch_attr): New.
(riscv_set_public_attributes): Likewise.
(riscv_md_end): Likewise.
(riscv_convert_symbolic_attribute): Likewise.
(s_riscv_attribute): Likewise.
(explicit_arch_attr): Likewise.
(riscv_pseudo_table): Add .attribute to the table.
(options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR
enumeration constants.
(md_longopts): Add `march-attr' and `mno-arch-attr' options.
(md_parse_option): Handle the new options.
(md_show_usage): Document the `march-attr' option.
* config/tc-riscv.h (md_end): Define as riscv_md_end
(riscv_md_end): Declare.
(CONVERT_SYMBOLIC_ATTRIBUTE): Define as
riscv_convert_symbolic_attribute.
(riscv_convert_symbolic_attribute): Declare.
(start_assemble): Declare.
* testsuite/gas/elf/elf.exp: Adjust test case for section2.e.
* testsuite/gas/elf/section2.e-riscv: New.
* testsuite/gas/riscv/attribute-01.d: New test
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-04.s: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-06.s: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-07.s: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-08.s: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.s: Likewise.
* testsuite/gas/riscv/empty.l: Likewise.
* doc/c-riscv.texi (.attribute): Add documentation.
* configure.ac (--enable-default-riscv-attribute): New options.
* configure: Re-generate.
* config.in: Re-generate.
include/
* elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define.
(Tag_RISCV_arch): Likewise.
(Tag_RISCV_priv_spec): Likewise.
(Tag_RISCV_priv_spec_minor): Likewise.
(Tag_RISCV_priv_spec_revision): Likewise.
(Tag_RISCV_unaligned_access): Likewise.
(Tag_RISCV_stack_align): Likewise.
|
|
|
|
binutils on upstream!
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
|
|
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property
notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED
properties. If the assembly input contains no instructions, set the
GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED
property. Add a --enable-x86-used-note configure time option to set the
default behavior. Set the default if the configure option is not used
to "no".
* NEWS: Mention -mx86-used-note=[no|yes].
* configure.ac: Add --enable-x86-used-note. Define
DEFAULT_X86_USED_NOTE.
* config.in: Regenerated.
* configure: Likewise.
* config/tc-i386.c (x86_isa_1_used): New.
(x86_feature_2_used): Likewise.
(x86_used_note): Likewise.
(_i386_insn): Add has_regmmx, has_regxmm, has_regymm and
has_regzmm.
(build_modrm_byte): Set i.has_regmmx, i.has_regzmm.
i.has_regymm and i.has_regxmm.
(x86_cleanup): New function.
(output_insn): Update x86_isa_1_used and x86_feature_2_used.
(OPTION_X86_USED_NOTE): New.
(md_longopts): Add -mx86-used-note=.
(md_parse_option): Handle OPTION_X86_USED_NOTE.
(md_show_usage): Display -mx86-used-note=.
* config/tc-i386.h (x86_cleanup): New prototype.
(md_cleanup): New.
* doc/c-i386.texi: Document -mx86-used-note=.
|
|
With the update to newer autotools, some gas object files are now
built in config/, breaking xtensa-elf and ia64-vms. This patch fixes
the dependencies.
* configure.ac: Specify extra_objects with leading "config/"
for xtensa-relax.o and te-vms.o. Use case statements to unique
extra_objects. Formatting.
* configure: Regenerate.
|
