aboutsummaryrefslogtreecommitdiff
path: root/gas/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2024-10-04x86: drop largely defunct gas emulationsJan Beulich1-41/+0
Both ELF and COFF have various sub-flavors, each of which would then require its own emulation: Right now when configuring a COFF/PE secondary target (with perhaps an ELF primary one), one gets plain COFF emulation rather than COFF/PE one. As such a multitude of emulations would be unwieldy (and likely fragile) drop gas emulations altogether instead.
2024-09-21x86: Add tls check in gasCui, Lili1-0/+18
Assembler shouldn't accept invalid TLS instructions, TLS relocations can only be used with specific instructions as specified in TLS psABI and linker issues an error when TLS relocations are used with wrong instructions or format. Since it is inconvenient for gcc to rely on linker to report errors, adding TLS check in the assembler stage so that gcc can know TLS errors earlier. gas/ChangeLog: PR gas/32022 * config.in: Regenerate. * config/tc-i386.c *(enum x86_tls_error_type): New. *(struct _i386_insn): Added has_gotrel to indicate whether TLS relocations need to be checked. (x86_check_tls_relocation): Added a new function to check TLS relocation. (x86_report_tls_error): Created a new function to report TLS error. (i386_assemble): Handle x86_check_tls_relocation. (lex_got): Set i.has_gotrel. (OPTION_MTLS_CHECK): Added a new option to contrl TLS check. (struct option): Ditto. (md_parse_option): Ditto. (md_show_usage): Ditto. * configure.ac: Added a new option to check TLS relocation by default. * configure: Regenerated. * doc/c-i386.texi: Document -mtls-check=. * testsuite/gas/i386/i386.exp: Added new tests. * testsuite/gas/i386/ilp32/ilp32.exp: Ditto. * testsuite/gas/i386/ilp32/reloc64.d: Disable TLS check for it. * testsuite/gas/i386/ilp32/x32-tls.d: Ditto. * testsuite/gas/i386/inval-tls.l: Added more test cases. * testsuite/gas/i386/inval-tls.s: Ditto. * testsuite/gas/i386/reloc32.d: Disable TLS check for it. * testsuite/gas/i386/reloc64.d: Ditto. * testsuite/gas/i386/x86-64-inval-tls.l: Added more test cases. * testsuite/gas/i386/x86-64-inval-tls.s: Ditto. * testsuite/gas/i386/x86-64.exp: Added new tests. * testsuite/gas/i386/ilp32/x32-inval-tls.l: New test. * testsuite/gas/i386/ilp32/x32-inval-tls.s: Ditto. * testsuite/gas/i386/ilp32/x86-64-tls.d: Ditto. * testsuite/gas/i386/tls.d: Ditto. * testsuite/gas/i386/tls.s: Ditto. * testsuite/gas/i386/x86-64-tls.d: Ditto. * testsuite/gas/i386/x86-64-tls.s: Ditto. ld/ChangeLog: PR gas/32022 * testsuite/ld-i386/tlsgdesc1.d: Disable TLS check for it. * testsuite/ld-i386/tlsgdesc2.d: Ditto. * testsuite/ld-i386/tlsie2.d: Ditto. * testsuite/ld-i386/tlsie3.d: Ditto. * testsuite/ld-i386/tlsie4.d: Ditto. * testsuite/ld-i386/tlsie5.d: Ditto. * testsuite/ld-i386/tlsgdesc3.d: Ditto. * testsuite/ld-x86-64/tlsdesc3.d: Ditto. * testsuite/ld-x86-64/tlsdesc4.d: Ditto. * testsuite/ld-x86-64/tlsie2.d: Ditto. * testsuite/ld-x86-64/tlsie3.d: Ditto. * testsuite/ld-x86-64/tlsie5.d: Ditto. * testsuite/ld-x86-64/tlsdesc5.d: Ditto.
2024-07-13Revert "MIPS: Use N64 by default for mips*64*-*-linux-gnuabi64"Maciej W. Rozycki1-1/+1
This reverts commit d49f2dd78b08efa4e1ee51f5df5058846c2eb4fa. It was applied unapproved.
2024-07-12MIPS: Use N64 by default for mips*64*-*-linux-gnuabi64YunQiang Su1-1/+1
the ABI section of the triple explicitly asks for N64, and in fact GCC also does so. It can fix the test failure: FAIL: libdep test: did not get expected output from the linker with Debian's mipsisa64r6el-linux-gnuabi64 toolchain.
2024-06-10autoupdate: add square brackets around arguments of AC_INITMatthieu Longo1-1/+1
https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fINIT-2
2024-06-10autoupdate: replace obsolete macros AC_AIX, AC_MINIX, and AC_GNU_SOURCEMatthieu Longo1-1/+0
- AC_AIX, AC_MINIX, and AC_GNU_SOURCE by AC_USE_SYSTEM_EXTENSIONS https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fAIX https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fMINIX-1 https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fGNU_005fSOURCE-1
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-11-30MIPS: Set r6 as default arch if vendor is imgYunQiang Su1-0/+6
This behavior is used by downstream toolchain since 2014, and has been in GCC since the same year. We don't support mips64*-img* due to GCC doesn't support it, and we believe that the multilib should be used for this case.
2023-11-10MIPS: Change all E_MIPS_* to EF_MIPS_*Ying Huang1-5/+5
2023-09-25Revert "arc: Update ARC's Gnu Assembler backend with ARCv3 ISA."Claudiu Zissulescu1-9/+1
This reverts commit f3d38d7d0b7346515ba603454feeddc58a3fc451.
2023-09-25arc: Update ARC's Gnu Assembler backend with ARCv3 ISA.Claudiu Zissulescu1-1/+9
The new Synopsys ARCv3 ISA has a similar instruction format like the old ARCv1 and ARCv2 ISA. Thus, the ARCv3 addition is using whatever we have for old ARC processors plus some ARCv3 spcific mods. To distinguish between various ARC variants, we introduced two new configure defines named TARGET_ARCv3_32 and TARGET_ARCv3_64 which are set when we choose either an ARC32 (ARCv3/32) ISA toolchain or an ARC64 (ARCv3/64) ISA toolchain. gas/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * gas/config/tc-arc.h: Selectively define default target macros. * gas/configure.ac: Add ARC64 target. * gas/configure.tgt: Likewise. * gas/configure: Regenerate * gas/config.in: Regenerate. * gas/config/tc-arc.c (DEFAULT_ARCH): New macro. (default_arch): New variable. (md_pseudo_table): Add xword. (md_shortopts): Only a few options are recognized by the new ARC64 assembler. (md_longopts): Likewise. (ARC_CPU_TYPE_A64x): New define. (ARC_CPU_TYPE_A32x): Likewise. (cpu_type): New arch field. (selected_cpu): Update fields. (arc_opcode_hash_entry_iterator_init): Formating. (arc_opcode_hash_entry_iterator_next): Likewise. (arc_select_cpu): Likewise. (arc_option): Likewise. (check_cpu_feature): Likewise. (debug_exp): Recognize new expression operands. (parse_reloc_symbol): Parse new signed/unsigend cases. (parse_opcode_flags): Update for the case when the flags needs insert/extract functions. (find_opcode_match): Match new signed/unsigned 32-bit immediates. (autodetect_attributes): PLT34 only available for ARC64. (md_assemble): Extend match characters. (declare_fp_set): New function. (init_default_arch): Likewise. (md_begin): Detect and initialize the correct CPU and coresponding registers. (md_pcrel_from_section): Add new relocs. (arc_target_format): New function. (md_apply_fix): Add new relocs. (md_parse_option): Update options. (arc_show_cpu_list): Update with ARC64 cpus. (md_show_usage): Update messages. (may_relax_expr): Add PLT34 case. (assemble_insn): Update for ARC64. (arc_make_nops): New function. (arc_handle_align): Refurbish this function, use arc_make_nops. (tc_arc_fix_adjustable): Update messages. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2023-08-30Revert "MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targets"Maciej W. Rozycki1-3/+3
This reverts commit 025e84f93566c8ced594ef48ddee1dec7e5b4cdd. It was applied unapproved.
2023-08-27MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targetsYunQiang Su1-3/+3
Following the arrangement in GCC select a 64-bit ABI by default, either n32 or n64, rather than o32 for `mipsisa64*-*-linux*' targets, just as with the corresponding `mips64*-*-linux*' targets.
2023-08-16kvx: New port.Paul Iannetta1-0/+8
2023-08-02Revert "2.41 Release sources"Sam James1-1/+2
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d. See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
2023-08-022.41 Release sourcesbinutils-2_41-releaseNick Clifton1-2/+1
2023-07-28MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targetsYunQiang Su1-3/+3
Make the n64 ABI the default for 64-bit Linux targets specified with `-gnuabi64' suffix included in the target triplet, for configurations such as the Debian mips64el and mips64r6el ports. Adjust testsuite configuration accordingly. There are the following regressions with the new target triplet: mips64-linux-gnuabi64 +FAIL: readelf -S bintest mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 mips64el-linux-gnuabi64 +FAIL: readelf -S bintest mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 The `readelf' issue comes from a difference in section headers produced that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template does not match. While there has been a precedent it does not appear to me that there is a clear advantage from adding more and more variations to the template rather than forking the existing template into multiple ones for a more exact match. So this is best deferred to a separate discussion. The MIPS reloc estimation issue is an actual bug in `objdump', which discards a number of trailing entries from output here for n64 composed relocations: DYNAMIC RELOCATION RECORDS OFFSET TYPE VALUE 0000000000000000 R_MIPS_NONE *ABS* 0000000000000000 R_MIPS_NONE *ABS* and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not match even though ELF output produced is correct according to `readelf': Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries: Offset Info Type Sym. Value Sym. Name 000000000000 000000000000 R_MIPS_NONE Type2: R_MIPS_NONE Type3: R_MIPS_NONE 000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2 Type2: R_MIPS_64 Type3: R_MIPS_NONE As a genuine bug this has to be handled separately. Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk> bfd/ * config.bfd: Add `mips64*el-*-linux*-gnuabi64' and `mips64*-*-linux*-gnuabi64' targets. binutils/ * testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64' targets. * testsuite/binutils-all/objcopy.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/binutils-all/remove-relocs-01.d: Likewise. * testsuite/binutils-all/remove-relocs-04.d: Likewise. * testsuite/binutils-all/remove-relocs-05.d: Likewise. * testsuite/binutils-all/remove-relocs-06.d: Likewise. gas/ * configure.ac: Handle `mips64*-linux-gnuabi64' targets. * configure: Regenerate. * testsuite/gas/mips/compact-eh-eb-7.d: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/gas/mips/compact-eh-el-7.d: Likewise. ld/ * configure.tgt: Add `mips64*el-*-linux-gnuabi64' and `mips64*-*-linux-gnuabi64' targets. * testsuite/ld-undefined/undefined.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise. * testsuite/ld-mips-elf/compact-eh6.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64' targets.
2023-07-28Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"Maciej W. Rozycki1-4/+1
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had two unrelated changes lumped together, one of which changed the meaning of the `mipsisa64*-*-linux*' target triplets, which was not properly evaluated.
2023-07-21DesCGENization of the BPF binutils portJose E. Marchesi1-1/+0
CGEN is cool, but the BPF architecture is simply too bizarre for it. The weird way of BPF to handle endianness in instruction encoding, the weird C-like alternative assembly syntax, the weird abuse of multi-byte (or infra-byte) instruction fields as opcodes, the unusual presence of opcodes beyond the first 32-bits of some instructions, are all examples of what makes it a PITA to continue using CGEN for this port. The bpf.cpu file is becoming so complex and so nested with p-macros that it is very difficult to read, and quite challenging to update. Also, every time we are forced to change something in CGEN to accommodate BPF requirements (which is often) we have to do extensive testing to make sure we do not break any other target using CGEN. This is getting un-maintenable. So I have decided to bite the bullet and revamp/rewrite the port so it no longer uses CGEN. Overall, this involved: * To remove the cpu/bpf.{cpu,opc} descriptions. * To remove the CGEN generated files. * To replace the CGEN generated opcodes table with a new hand-written opcodes table for BPF. * To replace the CGEN generated disassembler wih a new disassembler that uses the new opcodes. * To replace the CGEN generated assembler with a new assembler that uses the new opcodes. * To replace the CGEN generated simulator with a new simulator that uses the new opcodes. [This is pushed in GDB in another patch.] * To adapt the build systems to the new situation. Additionally, this patch introduces some extensions and improvements: * A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These relocations are used for section-relative 16-bit offsets used in load/store instructions. * The disassembler now has support for the "pseudo-c" assembly syntax of BPF. What dialect to use when disassembling is controlled by a command line option. * The disassembler now has support for dumping instruction immediates in either octal, hexadecimal or decimal. The used output base is controlled by a new command-line option. * The GAS BPF test suite has been re-structured and expanded in order to test the disassembler pseudoc syntax support. Minor bugs have been also fixed there. The assembler generic tests that were disabled for bpf-*-* targets due to the previous implementation of pseudoc syntax are now re-enabled. Additional tests have been added to test the new features of the assembler. .dump files are no longer used. * The linker BPF test suite has been adapted to the command line options used by the new disassembler. The result is very satisfactory. This patchs adds 3448 lines of code and removes 10542 lines of code. Tested in: * Target bpf-unknown-none with 64-bit little-endian host and 32-bit little-endian host. * Target x86-64-linux-gnu with --enable-targets=all Note that I have not tested in a big-endian host yet. I will do so once this lands upstream so I can use the GCC compiler farm. I have not included ChangeLog entries in this patch: these would be massive and not very useful, considering this is pretty much a rewrite of the port. I beg the indulgence of the global maintainers.
2023-07-14AIX_WEAK_SUPPORTAlan Modra1-0/+2
Making target code depend on a host define like _AIX52 is never correct, so out it goes. Also, sort some config.bfd entries a little to make it more obvious there is a config difference between aix5.1 and aix5.2. These two changes should make no difference to anything in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by simply not running the tests. include/ * coff/internal.h (C_WEAKEXT): Don't depend on _AIX52. bfd/ * coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52. (coff_classify_symbol): Likewise. * config.bfd: Sort some entries. gas/ * configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01]. * configure: Regenerate. * testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run for aix < 5.2.
2023-06-15Revert "MIPS: default r6 if vendor is img"Maciej W. Rozycki1-7/+1
This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was applied unapproved.
2023-06-05MIPS: default r6 if vendor is imgYunQiang Su1-1/+7
This behavior is used by downstream toolchain since 2014. We also set the default ABI for mips*-img-elf to O32. The previous value is NO_ABI, which is not good default ABI. We don't support mips64*-img* due to GCC doesn't support it, and We believe that the multilib should be used for this case.
2023-05-04MIPS: revert "default r6 if vendor is img"YunQiang Su1-9/+0
In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc, The default output is set to r6 if the vendor is img, It is ugly and should not be in upstream. Let's revert it.
2023-04-23MIPS: default output r6 obj if the triple is r6YunQiang Su1-0/+9
If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output r6 objects by default. The triples with vendor `img` should do same. The examples include: as xx.s -o xx.o ld -r -b binary xx.dat -o xx.o
2023-04-23MIPS: support mips*64 as CPU and gnuabi64 as ABIYunQiang Su1-1/+4
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is used as the cpu name in triple. Let's recognize them by `mips*64*(el)`. For 64bit Ports, like Debian's mips64el and mips64r6el ports, `gnuabi64` is used as the abi section. Let's use N64 abi by default for the triple with gnuabi64.
2023-01-02obsolete target tidyAlan Modra1-2/+1
Delete a few files only used for obsolete targets, and tidy config, xfails and other pieces of support specific to those targets. And since I was editing target triplets in test files, fix the nm alpha-linuxecoff fails.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-12-19Arm: break gas dependency on libopcodesJan Beulich1-1/+1
gas doesn't use anything from libopcodes (anymore?) - suppress linking in that library.
2022-12-12x86: break gas dependency on libopcodesJan Beulich1-1/+1
gas doesn't use anything from libopcodes anymore - suppress linking in that library.
2022-10-11add --enable-default-compressed-debug-sections-algorithm configure optionMartin Liska1-0/+12
ChangeLog: * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. gas/ChangeLog: * NEWS: Document the new option. * as.c (flag_compress_debug): Set default algorithm based on the configure option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. ld/ChangeLog: * NEWS: Document the new option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. * ldmain.c: Set default algorithm based on the configure option.
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song1-1/+2
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2022-06-27drop XC16x bitsJan Beulich1-4/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-01-07RISC-V: update docs to reflect privileged spec v1.9 has been droppedPhilipp Tomsich1-1/+1
After commit d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.") has removed support for privileged spec v1.9, this removes it from the documentation. References: d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.") gas/ChangeLog: * configure: Regenerate. * configure.ac: Remove reference to priv spec 1.9. * po/fr.po: Same. * po/ru.po: Same. * po/uk.po: Same.
2022-01-07RISC-V: update docs for -mpriv-spec/--with-priv-spec for 1.12Philipp Tomsich1-1/+1
While support for the privileged spec was added in a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the documentation has not been updated. Add 1.12 to the relevant documentation. References: a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12") gas/ChangeLog: * config/tc-riscv.c: Add 1.12 to the usage message. * configure: Regenerate. * configure.ac: Add 1.12 to the help/usage message. * po/fr.po: Same. * po/ru.po: Same. * po/uk.po: Same.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-01gas: merge doc subdir up a levelMike Frysinger1-1/+1
This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism.
2021-11-25gas: enable silent build rulesMike Frysinger1-0/+1
2021-10-24LoongArch gas supportliuzhensong1-0/+13
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> Xiaolin Tang <tangxiaolin@loongson.cn> gas/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * config/loongarch-lex-wrapper.c: New. * config/loongarch-lex.h: New. * config/loongarch-lex.l: New. * config/loongarch-parse.y: New. * config/tc-loongarch.c: New. * config/tc-loongarch.h: New. * configure.ac: Add LoongArch. * configure.tgt: Likewise. * doc/as.texi: Likewise. * doc/c-loongarch.texi: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/all/gas.exp: Add LoongArch. * gas/elf/elf.exp: Likewise. * gas/loongarch/4opt_op.d: New. * gas/loongarch/4opt_op.s: Likewise. * gas/loongarch/fix_op.d: Likewise. * gas/loongarch/fix_op.s: Likewise. * gas/loongarch/float_op.d: Likewise. * gas/loongarch/float_op.s: Likewise. * gas/loongarch/imm_op.d: Likewise. * gas/loongarch/imm_op.s: Likewise. * gas/loongarch/jmp_op.d: Likewise. * gas/loongarch/jmp_op.s: Likewise. * gas/loongarch/load_store_op.d: Likewise. * gas/loongarch/load_store_op.s: Likewise. * gas/loongarch/loongarch.exp: Likewise. * gas/loongarch/macro_op.d: Likewise. * gas/loongarch/macro_op.s: Likewise. * gas/loongarch/nop.d: Likewise. * gas/loongarch/nop.s: Likewise. * gas/loongarch/privilege_op.d: Likewise. * gas/loongarch/privilege_op.s: Likewise. * gas/loongarch/syscall.d: Likewise. * gas/loongarch/syscall.s: Likewise. * lib/gas-defs.exp: Add LoongArch.
2021-07-13RISC-V: Enable elf attributes when default configure option isn't set.Nelson Chu1-8/+1
Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable elf attributes for all riscv targets by default in gcc. Therefore, I think binutils should have the same behavior, in case users are writing assembly files. If --enable-default-riscv-attribute isn't set, then we enable the elf attributes for all riscv targets by default. ChangLog: binutils/ * testsuite/binutils-all/readelf.s: Add comments for riscv. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: Likewise. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. gas/ * configure.ac: If --enable-default-riscv-attribute isn't set, then we enable the elf attributes for all riscv targets by default. * configure: Regenerated.
2021-04-05C99 gas configuryAlan Modra1-32/+2
Also remove alloca stuff since we don't use alloca in gas nowadays. * configure.ac: Don't check for string.h, strings.h, stdlib.h, errno.h, limits.h, locale.h or time.h. Don't check for unlink, remove, sbrk (unused) or setlocale. Adjust gas_test_headers. Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv strstr, or vsnprintf declarations. (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. * as.h: Don't include alloca-conf.h, include config.h instead. Include string.h, stdlib.h, errno.h unconditionally. Remove various fallback declarations. * asintl.h: Don't test HAVE_LOCALE_H. * as.c: Don't test HAVE_SETLOCALE. * dwarf2dbg.c: Include limits.h unconditionally. * expr.c: Likewise. * sb.c: Likewise. * symbols.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2021-02-24PR23691, gas .y files vs. automatic make dependenciesAlan Modra1-4/+4
A number of targets, bfin, rl78, rx, can show odd failures when bfd/reloc.c changes BFD_RELOC_* enum values, if recompiling over a build dir with existing objects. The problem is caused by bfin-parse.o and similar not being recompiled and so using stale BFD_RELOC_* values. This isn't fixed by making bfin-parse.c depend on bfd/reloc.c, which isn't necessary anyway. bfin-parse.o should have been recompiled due to bfd/bfd.h changing when extracted bfd/reloc.c BFD_RELOC_* values change, but that wasn't happening. The problem is that automake generates a makefile that loads gas/config/.deps/ dependency file for objects with corresponding sources mentioned in EXTRA_as_new_SOURCES. Unless we want to mess around generating explicit dependencies, I think that mean moving some object files to the build gas/config/. This patch does that, removing some hacks for m68k-parse.c that should no longer be necessary, and removes some rules that catered to old bison producing code that triggers compiler warnings. PR 23691 * Makefile.am (TARGET_CPU_CFILES): Split off config/xtensa-relax.c.. (TARGET_CPU_HFILES): ..and config/xtensa-relax.h.. (TARGET_EXTRA_FILES): ..to here. Add config/bfin-lex-wrapper.c, and use alongside TARGET_CPU_CFILES. (EXTRA_DIST): Update location of generated .c files. (config/m68k-parse.c): New rule replacing m68k-parse.c rule. (config/bfin-parse.c, config/rl78-parse.cm config/rx-parse.c), (config/bfin-lex.c, config/bfin-lex-wrapper.@OBJEXT@): Similarly. (itbl-lex-wrapper.@OBJEXT@): Simplify to just the needed dependencies. (itbl-parse.@OBJEXT@): Delete rule using NO_WERROR. (itbl-parse.c, itbl-parse.h): Tidy. * config/bfin-lex-wrapper.c: Include config/bfin-lex.c. * config/bfin-lex.l: Include config/bfin-parse.h. * configure.ac (extra_objects): Move object files corresponding to .y and .l files now in config/ to config/. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2021-01-12Implement a workaround for GNU mak jobserverH.J. Lu1-0/+2
Compiling binutils using -flto=jobserver with GCC 11 leads to libtool: link: gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Wwrite-strings -I../../gas/../zlib -g -O2 -fprofile-generate -flto=jobserver -o as-new app.o as.o atof-generic.o compress-debug.o cond.o depend.o dwarf2dbg.o dw2gencfi.o ecoff.o ehopt.o expr.o flonum-copy.o flonum-konst.o flonum-mult.o frags.o hash.o input-file.o input-scrub.o listing.o literal.o macro.o messages.o output-file.o read.o remap.o sb.o stabs.o subsegs.o symbols.o write.o config/tc-i386.o config/obj-elf.o config/atof-ieee.o ../opcodes/.libs/libopcodes.a ../bfd/.libs/libbfd.a -L/tmp/binutils-gdb/objdir/zlib -lz ../libiberty/libiberty.a -ldl lto-wrapper: warning: jobserver is not available: '--jobserver-auth=' is not present in 'MAKEFLAGS' since the '+' is missing on the recipe line in Makefiles generated by automake. Add the '+' to the recipe line by hand. bfd/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. binutils/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. config/ PR binutils/26792 * jobserver.m4: New file. gas/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. gprof/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. ld/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. libctf/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise. opcodes/ PR binutils/26792 * configure.ac: Use GNU_MAKE_JOBSERVER. * aclocal.m4: Regenerated. * configure: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-07-09Linux/x86: Configure gas with --enable-x86-used-note by defaultH.J. Lu1-0/+7
* configure.ac: Configure with --enable-x86-used-note by default for Linux/x86. * configure: Regenerated.
2020-05-20[PATCH v2 0/9] RISC-V: Support version controling for ISA standard ↵Nelson Chu1-1/+32
extensions and CSR 1. Remove the -mriscv-isa-version and --with-riscv-isa-version options. We can still use -march to choose the version for each extensions, so there is no need to add these. 2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...]. Unlike the architecture string has specified by spec, ther is no need to do the same thing for options. 3. Spilt the patches to reduce the burdens of review. [PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions to [PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions [PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default. [PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version. to [PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version. [PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version. 4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c. The behavior is same as comparing the choosen privilege spec. include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean. (enum riscv_isa_spec_class): New enum class. All supported ISA spec belong to one of the class (struct riscv_ext_version): New structure holds version information for the specific ISA. * opcode/riscv-opc.h (DECLARE_CSR): There are two version information, define_version and abort_version. The define_version means which privilege spec is started to define the CSR, and the abort_version means which privilege spec is started to abort the CSR. If the CSR is valid for the newest spec, then the abort_version should be PRIV_SPEC_CLASS_DRAFT. (DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR. * opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define the current supported privilege spec versions. (struct riscv_csr_extra): Add new fields to store more information about the CSR. We use these information to find the suitable CSR address when user choosing a specific privilege spec. binutils * dwarf.c: Updated since DECLARE_CSR is changed. opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store all information about the supported spec and the corresponding ISA versions. Currently, only Zicsr is supported to verify the correctness of Z sub extension settings. Others will be supported in the future patches. (struct isa_spec_t, isa_specs): List for all supported ISA spec classes and the corresponding strings. (riscv_get_isa_spec_class): New function. Get the corresponding ISA spec class by giving a ISA spec string. * riscv-opc.c (struct priv_spec_t): New structure. (struct priv_spec_t priv_specs): List for all supported privilege spec classes and the corresponding strings. (riscv_get_priv_spec_class): New function. Get the corresponding privilege spec class by giving a spec string. (riscv_get_priv_spec_name): New function. Get the corresponding privilege spec string by giving a CSR version class. * riscv-dis.c: Updated since DECLARE_CSR is changed. * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR according to the chosen version. Build a hash table riscv_csr_hash to store the valid CSR for the chosen pirv verison. Dump the direct CSR address rather than it's name if it is invalid. (parse_riscv_dis_option_without_args): New function. Parse the options without arguments. (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to parse the options without arguments first, and then handle the options with arguments. Add the new option -Mpriv-spec, which has argument. * riscv-dis.c (print_riscv_disassembler_options): Add description about the new OBJDUMP option. ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated priv attributes according to the -mpriv-spec option. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise. bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function get_default_version. It is used to find the default version for the specific extension. * elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters default_major_version and default_minor_version. Add new bfd_boolean parameter *use_default_version. Set it to TRUE if we need to call the callback rps->get_default_version to find the default version. (riscv_parse_std_ext): Call rps->get_default_version if we fail to find the default version in riscv_parsing_subset_version, and then call riscv_add_subset to add the subset into subset list. (riscv_parse_prefixed_ext): Likewise. (riscv_std_z_ext_strtab): Support Zicsr extensions. * elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the strings rather than characters. riscv_merge_arch_attr_info): The callback function get_default_version is only needed for assembler, so set it to NULL int the linker. * elfxx-riscv.c (riscv_estimate_digit): Remove the static. * elfxx-riscv.h: Updated. gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated. * config/tc-riscv.c (default_arch_with_ext, default_isa_spec): Static variables which are used to set the ISA extensions. You can use -march (or ELF build attributes) and -misa-spec to set them, respectively. (ext_version_hash): The hash table used to handle the extensions with versions. (init_ext_version_hash): Initialize the ext_version_hash according to riscv_ext_version_table. (riscv_get_default_ext_version): The callback function of riscv_parse_subset_t. According to the choosed ISA spec, get the default version for the specific extension. (riscv_set_arch): Set the callback function. (enum options, struct option md_longopts): Add new option -misa-spec. (md_parse_option): Do not call riscv_set_arch for -march. We will call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class to set default_isa_spec class. (riscv_after_parse_args): Call init_ext_version_hash to initialize the ext_version_hash, and then call riscv_set_arch to set the architecture with versions according to default_arch_with_ext. * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for x extensions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we already set it's version to 2p1 by march, so no need to use the default 2p2 version. For m-ext, we do not set the version by -march and ELF arch attribute, so set the default 2p0 to it. For zicsr, it is not defined in ISA spec 2p2, so set 0p0 to it. * testsuite/gas/riscv/attribute-10.d: New testcase. The version of zicsr is 2p0 according to ISA spec 20191213. * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT) (DEFAULT_RISCV_ISA_SPEC): Default configure option settings. You can set them by configure options --with-arch and --with-isa-spec, respectively. (riscv_set_default_isa_spec): New function used to set the default ISA spec. (md_parse_option): Call riscv_set_default_isa_spec rather than call riscv_get_isa_spec_class directly. (riscv_after_parse_args): If the -isa-spec is not set, then we set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by calling riscv_set_default_isa_spec. * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since the --with-isa-spec may be set to different ISA spec. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * configure.ac: Add configure options, --with-arch and --with-isa-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (default_priv_spec): Static variable which is used to check if the CSR is valid for the chosen privilege spec. You can use -mpriv-spec to set it. (enum reg_class): We now get the CSR address from csr_extra_hash rather than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX. (riscv_init_csr_hashes): Only need to initialize one hash table csr_extra_hash. (riscv_csr_class_check): Change the return type to void. Don't check the ISA dependency if -mcsr-check isn't set. (riscv_csr_version_check): New function. Check and find the CSR address from csr_extra_hash, according to default_priv_spec. Report warning for the invalid CSR if -mcsr-check is set. (reg_csr_lookup_internal): Updated. (reg_lookup_internal): Likewise. (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed. (enum options, struct option md_longopts): Add new GAS option -mpriv-spec. (md_parse_option): Call riscv_set_default_priv_version to set default_priv_spec. (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default privilege spec to the newest one. (enum riscv_csr_class, struct riscv_csr_extra): Move them to include/opcode/riscv.h. * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want to check the ISA dependency for CSR, so fix the spec version by adding -mpriv-spec=1.11. * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some version warnings for the test case. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case. Check whether the CSR is valid when privilege version 1.9 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case. Check whether the CSR is valid when privilege version 1.9.1 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case. Check whether the CSR is valid when privilege version 1.10 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case. Check whether the CSR is valid when privilege version 1.11 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option setting. You can set it by configure option --with-priv-spec. (riscv_set_default_priv_spec): New function used to set the default privilege spec. (md_parse_option): Call riscv_set_default_priv_spec rather than call riscv_get_priv_spec_class directly. (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by calling riscv_set_default_priv_spec. * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since the --with-priv-spec may be set to different privilege spec. * testsuite/gas/riscv/priv-reg.d: Likewise. * configure.ac: Add configure option --with-priv-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to explicit_attr. Set it to TRUE if any ELF attribute is found. (riscv_set_default_priv_spec): Try to set the default_priv_spec if the priv attributes are set. (md_assemble): Set the default_priv_spec according to the priv attributes when we start to assemble instruction. (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to riscv_write_out_attrs. Update the arch and priv attributes. If we don't set the corresponding ELF attributes, then try to output the default ones. (riscv_set_public_attributes): If any ELF attribute or -march-attr options is set (explicit_attr is TRUE), then call riscv_write_out_attrs to update the arch and priv attributes. (s_riscv_attribute): Make sure all arch and priv attributes are set before any instruction. * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any ELF attribute or -march-attr is set. If the priv attributes are not set, then try to update them by the default setting (-mpriv-spec or --with-priv-spec). * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-09.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec set by priv attributes must be supported. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated priv attributes according to the -mpriv-spec option. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg.d: Removed. * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the CSR according to the priv spec 1.9. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the CSR according to the priv spec 1.9.1. * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the CSR according to the priv spec 1.10. * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the CSR according to the priv spec 1.11. * config/tc-riscv.c (md_show_usage): Add descriptions about the new GAS options. * doc/c-riscv.texi: Likewise.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-05-23gas: add support for eBPFJose E. Marchesi1-0/+6
This patch adds a port for the Linux kernel eBPF to the GNU assembler. A testsuite and documentation updates are included. gas/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Handle bpf-*-* targets. * configure.tgt (generic_target): Likewise. * configure: Regenerate. * Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c. (TARGET_CPU_HFILES): Add tc-bpf.h. * Makefile.in: Regenerated. * config/tc-bpf.c: New file. * config/tc-bpf.h: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-bpf.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: set BPF. * doc/as.texi: Add eBPF contents. * doc/c-bpf.texi: New file. * testsuite/gas/bpf/alu.d: New file. * testsuite/gas/bpf/mem-be.d: Likewise. * testsuite/gas/bpf/mem.s: Likewise. * testsuite/gas/bpf/mem.d: Likewise. * testsuite/gas/bpf/lddw-be.d: Likewise. * testsuite/gas/bpf/lddw.s: Likewise. * testsuite/gas/bpf/lddw.d: Likewise. * testsuite/gas/bpf/jump-be.d: Likewise. * testsuite/gas/bpf/jump.s: Likewise. * testsuite/gas/bpf/jump.d: Likewise. * testsuite/gas/bpf/exit-be.d: Likewise. * testsuite/gas/bpf/exit.s: Likewise. * testsuite/gas/bpf/exit.d: Likewise. * testsuite/gas/bpf/call-be.d: Likewise. * testsuite/gas/bpf/call.s: Likewise. * testsuite/gas/bpf/call.d: Likewise. * testsuite/gas/bpf/bpf.exp: Likewise. * testsuite/gas/bpf/atomic-be.d: Likewise. * testsuite/gas/bpf/atomic.s: Likewise. * testsuite/gas/bpf/atomic.d: Likewise. * testsuite/gas/bpf/alu-be.d: Likewise. * testsuite/gas/bpf/alu32-be.d: Likewise. * testsuite/gas/bpf/alu32.s: Likewise. * testsuite/gas/bpf/alu32.d: Likewise. * testsuite/gas/bpf/alu.s: Likewise. * testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF. * testsuite/gas/all/org-1.s: Support nop_type 6. * testsuite/gas/all/org-1.l: Updated to reflect changes in org-1.s.
2019-02-19Fix a potential deadlock in some older Loongson 3A1000 MIPS processors.Paul Hua1-0/+18
* NEWS: Mention -m[no-]fix-loongson3-llsc. * configure.ac: Add --enable-mips-fix-loongson3-llsc. Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC. * config.in: Regenerated. * configure: Likewise. * config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc): New variables. (options): New OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_longopts): Add -m[no-]fix-loongson3-llsc. (md_begin): Initialize sync insn. (fix_loongson3_llsc): New. (append_insn): Call fix_loongson3_llsc. (md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_show_usage): Display -m[no-]fix-loongson3-llsc. * doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc, --enable-mips-fix-loongson3-llsc=[yes|no].
2019-01-28Control gas enable-checking default by bfd/development.shAlan Modra1-4/+3
* configure.ac (ac_checking): Set from bfd/development.sh development variable. * configure: Regenerate.
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson1-0/+25
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
generated by cgit v1.1 at 2024-12-17 00:57:03 +0000