aboutsummaryrefslogtreecommitdiff
path: root/gas/config
AgeCommit message (Collapse)AuthorFilesLines
2017-01-12Enable Intel AVX512_VPOPCNTDQ instructionsIgor Tsimbalist1-0/+3
gas/ 2017-01-12 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_vpopcntdq. (cpu_noarch): Add noavx512_vpopcntdq. * doc/c-i386.texi: Document avx512_vpopcntdq, noavx512_vpopcntdq. * testsuite/gas/i386/i386.exp: Run AVX512_VPOPCNTDQ tests. * testsuite/gas/i386/avx512_vpopcntdqd-intel.d: New file. * testsuite/gas/i386/avx512_vpopcntdqd.d: Ditto. * testsuite/gas/i386/avx512_vpopcntdqd.s: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd.d: Ditto. * testsuite/gas/i386/x86-64-avx512_vpopcntdqd.s: Ditto. opcodes/ 2017-01-12 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * i386-dis.c (enum): Add PREFIX_EVEX_0F3855, EVEX_W_0F3855_P_2. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_VPOPCNTDQ_FLAGS, CPU_ANY_AVX512_VPOPCNTDQ_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_VPOPCNTDQ. * i386-opc.h (enum): (AVX512_VPOPCNTDQ): New. (i386_cpu_flags): Add cpuavx512_vpopcntdq. * i386-opc.tbl: Add Intel AVX512_VPOPCNTDQ instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2017-01-09RISC-V/GAS: Support more relocs against constant addressesAndrew Waterman1-3/+2
Previously, some pseudoinstructions like "call" only accepted symbolic addresses and rejected constant addresses with an esoteric internal error. This patch enables them by deferring application of constant relocations to md_apply_fix, rather than eagerly applying them during instruction assembly. gas/ChangeLog 2017-01-09 Andrew Waterman <andrew@sifive.com> * config/tc-riscv.c (append_insn): Don't eagerly apply relocations against constants. (md_apply_fix): Mark relocations against constants as "done."
2017-01-09RISC-V/GAS: Improve handling of invalid relocsAndrew Waterman1-1/+9
TLS relocs against constants previously segfaulted, and illegal symbol subtractions were silently ignored. The previous behavior was to segfault. gas/ChangeLog 2017-01-09 Andrew Waterman <andrew@sifive.com> * config/tc-riscv.c (md_apply_fix): Report TLS relocations against constants. Report disallowed symbol subtractions.
2017-01-09RISC-V/GAS: Correct branch relaxation for weak symbols.Andrew Waterman1-0/+1
* config/tc-riscv.c (relaxed_branch_length): Use the long sequence when the target is a weak symbol.
2017-01-04[AArch64] Add separate feature flag for weaker release consistent load insnsSzabolcs Nagy1-0/+2
The weaker release consistency support of ARMv8.3-A is allowed as an optional extension for ARMv8.2-A, so separate command line option and feature flag is added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on. opcodes/ * aarch64-tbl.h (RCPC, RCPC_INSN): Define. (aarch64_opcode_table): Use RCPC_INSN. include/ * opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define. (AARCH64_ARCH_V8_3): Update. gas/ * config/tc-aarch64.c (aarch64_features): Add rcpc. * doc/c-aarch64.texi (AArch64 Extensions): Document rcpc. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ... * testsuite/gas/aarch64/ldst-rcpc.d: This. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ... * testsuite/gas/aarch64/ldst-rcpc.s: This. * testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
2017-01-03Add support for the Q extension to the RISCV ISA.Kito Cheng1-2/+12
gas * config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA extension. (riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is enabled and no other ABI is specified. include * opcode/riscv-opc.h: Add support for the "q" ISA extension. opcodes * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA extension. * riscv-opcodes/all-opcodes: Likewise.
2017-01-03Fix PRU GAS for 32-bit hostsDimitar Dimitrov1-7/+12
The PRU GAS port I originally submitted does not build on 32bit hosts. This patch fixes it by aligning md_number_to_chars's definition with the global declaration in tc.h. Here is the original bug report I got: https://github.com/rcn-ee/repos/pull/23#issuecomment-269915175 * config/tc-pru.c (md_number_to_chars): Fix parameter to be valueT, as declared in tc.h. (md_apply_fix): Fix to work on 32-bit hosts. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2017-01-02Update year range in copyright notice of all files.Alan Modra242-242/+242
2016-12-31PRU GAS PortDimitar Dimitrov3-0/+2104
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * config/obj-elf.c: Ditto. * configure.tgt: Ditto. * config/tc-pru.c: New file. * config/tc-pru.h: New file. * doc/Makefile.am: Add documentation for PRU GAS port. * doc/all.texi, Ditto. * doc/as.texinfo: Ditto. * doc/c-pru.texi: Document PRU GAS options. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. * testsuite/gas/pru/alu.s: Ditto. * testsuite/gas/pru/branch.d: Ditto. * testsuite/gas/pru/branch.s: Ditto. * testsuite/gas/pru/illegal.l: Ditto. * testsuite/gas/pru/illegal.s: Ditto. * testsuite/gas/pru/ldi.d: Ditto. * testsuite/gas/pru/ldi.s: Ditto. * testsuite/gas/pru/ldst.d: Ditto. * testsuite/gas/pru/ldst.s: Ditto. * testsuite/gas/pru/loop.d: Ditto. * testsuite/gas/pru/loop.s: Ditto. * testsuite/gas/pru/misc.d: Ditto. * testsuite/gas/pru/misc.s: Ditto. * testsuite/gas/pru/pru.exp: Ditto. * testsuite/gas/pru/pseudo.d: Ditto. * testsuite/gas/pru/pseudo.s: Ditto. * testsuite/gas/pru/warn_reglabel.l: Ditto. * testsuite/gas/pru/warn_reglabel.s: Ditto. * testsuite/gas/pru/xfr.d: Ditto. * testsuite/gas/pru/xfr.s: Ditto. * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-23MIPS16: Simplify extended operand handlingMaciej W. Rozycki1-1/+1
Simplify extended operand handling and only specially process immediates which require bit shuffling, using the generic operand insertion and extraction handlers for the '<' (5-bit shift amount) operand code in particular. Require the least significant bit of all extended operand forms to be (artificially) set to 0 for their special processing to trigger. gas/ * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' use to operands whose LSB position is zero. opcodes/ * mips-dis.c (print_mips16_insn_arg): Simplify processing of extended operands. * mips16-opc.c (decode_mips16_operand): Switch the extended form of the `<' operand type to LSB position 22.
2016-12-23MIPS16/GAS: Clean up invalid unextended operand handlingMaciej W. Rozycki1-2/+5
Bail out right away when an unextended instruction encoding is required either with the use of a `.t' suffix or by means of `.set noautoextend', however an operand supplied requires the extended instruction form to be used. This is to avoid messing up with the internal state of the assembler, even though no actual failures are known to happen as a result. Add test cases for the situation concerned. gas/ * config/tc-mips.c (match_mips16_insn): Don't update `forced_insn_length' or the instruction opcode if an operand requires an extended instruction form, but an unextended one has been requested. * testsuite/gas/mips/mips16-relax-unextended-1.d: New test. * testsuite/gas/mips/mips16-relax-unextended-2.d: New test. * testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr output. * testsuite/gas/mips/mips16-relax-unextended-1.s: New test source. * testsuite/gas/mips/mips16-relax-unextended-2.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Reassign `0' and `4' operand codesMaciej W. Rozycki1-5/+5
Replace `0' and `4' operand codes with `.' and `F' respectively to free up the `0'-`4' consecutive range. No functional change. gas/ * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_macro): Likewise. include/ * opcode/mips.h: Replace `0' and `4' operand codes with `.' and `F' respectively. opcodes/ * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_opcodes): Likewise.
2016-12-23MIPS16: Handle non-extensible instructions correctlyMaciej W. Rozycki1-0/+2
Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Remove "extended" BREAK/SDBBP handlingMaciej W. Rozycki1-8/+1
Remove special casing for the `6' operand code used for the embedded trap code of the BREAK and the SDBBP instructions to support supposedly extended forms of these instructions. According to all versions of the MIPS16 ASE specifications these instructions are not extensible [1][2][3][4][5][7][8][10][11], and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [5][6][9][10]. Therefore supposedly extended BREAK and SDBBP instructions do not serve their purpose anymore as they do not cause a Bp and a Debug exception respectively and supporting these forms in disassembly only causes confusion. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] same, Table 18. "Extendable MIPS16 Instructions", p. 24 [4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38 [5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41 [6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41 [7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49 [8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39 [9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42 [10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43 [11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50 gas/ * config/tc-mips.c (match_mips16_insn): Remove the `6' operand code special case and its associated comment. opcodes/ * mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended encoding support.
2016-12-23MIPS16/GAS: Fix forced size suffixes with argumentless instructionsMaciej W. Rozycki1-10/+15
Correct the handling of `.e' and `.t' instruction size suffixes with instruction mnemonics which are not followed by any text on the same line, such as arguments or white space, e.g.: $ cat test.s .set mips16 foo: entry.t # comment entry.t exit.t # comment exit.t nop.t # comment nop.t $ as -32 -o test.o test.s test.s: Assembler messages: test.s:4: Error: unrecognized opcode `entry.t' test.s:6: Error: unrecognized opcode `exit.t' test.s:8: Error: unrecognized opcode `nop.t' $ gas/ * config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction suffixes followed by a null character rather than a space too. * testsuite/gas/mips/mips16-insn-length-noargs.d: New test. * testsuite/gas/mips/mips16-insn-length-noargs.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-23[msp430] Sync tc-msp430.c with devices.csvJoe Seymour1-6/+5
This patch syncs the generated data structure in tc-msp430.c with the latest version of devices.csv released by TI. My understanding is that the devices being removed were "invalid spins", so can't be being used by anyone, and never will be. Current web searches related to these devices return no relevant results. Built and tested (no regressions) as follows: Configured with: --target=msp430-elf --disable-gdb Test variations: msp430-sim/-mcpu=msp430 msp430-sim/-mcpu=msp430x msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either msp430-sim/-mhwmult=none msp430-sim/-mhwmult=f5series gas/ * config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's devices.csv file as of September 2016.
2016-12-22Support aligning text section from odd addressesAndrew Waterman1-6/+16
Previously, the alignment directives were not correctly supported in the text section when current alignment was only 1 byte (i.e., when the address was odd). Since there are no 1-byte instructions in RISC-V, this patch resolves the bug by writing a zero byte to obtain 2-byte alignment, at which point a 2-byte NOP can be used to obtain 4-byte alignment. Resolves https://github.com/riscv/riscv-gnu-toolchain/issues/205 * config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs. (riscv_frag_align_code): Correct frag_align_code arg.
2016-12-22Fix a const-safety issue on GCC-4.9 and aboveTim Newsome1-1/+1
* config/tc-riscv.c (riscv_pre_output_hook): Remove const from loc4_frag.
2016-12-20MIPS16: Switch to 32-bit opcode table interpretationMaciej W. Rozycki1-24/+68
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-20Don't define RISC-V .p2alignAndrew Waterman2-42/+68
* config/tc-riscv.c (riscv_pseudo_table): Remove "align", "p2align", and "balign". (s_align): Remove. (riscv_handle_align): New function. (riscv_frag_align_code): Likewise. (riscv_make_nops): Likewise. * config/tc-riscv.h (MAX_MEM_FOR_RS_ALIGN_CODE): Change to 7. (HANDLE_ALIGN): Define. (md_do_align): Define. (riscv_handle_align): Declare. (riscv_frag_align_code): Likewise.
2016-12-20Re-work RISC-V gas flags: now we just support -mabi and -marchAndrew Waterman2-105/+93
We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.
2016-12-20Rework RISC-V relocationsAndrew Waterman2-54/+166
Before this commit we didn't cleanly support CFI directives because the internal offsets used to get relaxed which broke them. This patch significantly reworks how we handle linker relaxations: * DWARF is now properly supported * There is a ".option norelax" to disable relaxations, for when users write assembly that can't be relaxed (if it's to be later patched up, for example). * There is an additional _RELAX relocation that specifies when previous relocations can be relaxed. We're in the process of documenting the RISC-V ELF ABI, which will include documentation of our relocations https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md but we expect that this relocation set will remain ABI compatible in the future (ie, it's safe to release). Thanks to Kuan-Lin Chen for figuring out how to correctly relax the debug info! include/ * elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32. bfd/ * reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation. (BFD_RELOC_RISCV_TPREL_S): Likewise. (BFD_RELOC_RISCV_RELAX): Likewise. (BFD_RELOC_RISCV_CFA): Likewise. (BFD_RELOC_RISCV_SUB6): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET16): Likewise. (BFD_RELOC_RISCV_SET32): Likewise. * elfnn-riscv.c (perform_relocation): Handle the new relocations. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Likewise. (howto_table): Likewise. (riscv_reloc_map): Likewise. (relax_func_t): New type. (_bfd_riscv_relax_call): Add reserve_size argument, which controls the maximal offset pessimism. Correct type of max_alignment. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Compute the required reserve size when relocating and use it to when calling relax_func. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ * config/tc-riscv.c (riscv_set_options): Add relax. (riscv_opts): Likewise. (s_riscv_option): Add relax and norelax. (riscv_apply_const_reloc): New function. (append_insn): Move constant relocation handling to riscv_apply_const_reloc. (md_pcrel_from): Likewise. (parse_relocation): Skip BFD_RELOC_UNUSED. (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. (md_apply_fix): Likewise. (riscv_pre_output_hook): New function. * config/tc-riscv.h (md_pre_output_hook): Define. (riscv_pre_output_hook): Declare. (DWARF_CIE_DATA_ALIGNMENT): Always -4.
2016-12-20Formatting changes for RISC-VAndrew Waterman1-27/+28
This is a mixed bag of format changes: * Replacing constants with macros (0xffffffff with MINUS_ONE, for example). There's one technically functional change in here (some MINUS_ONEs are changed to 0), but it only changes the behavior of an otherwise-unused field. * Using 0 instead of 0x0 in the relocation table. * There were some missing spaces before parens, the spaces have been added. * A handful of comments are now more descriptive. * A bunch of whitespace-only changes, mostly alignment and brace newlines. bfd/ * elfnn-riscv.c: Formatting and comment fixes throughout. * elfxx-riscv.c: Likewise. (howto_table): Change the src_mask field from MINUS_ONE to 0 for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPMOD64, R_RISCV_TLS_DTPREL32, R_RISCV_TLS_DTPREL64, R_RISCV_TLS_TPREL32, R_RISCV_TLS_TPREL64. opcodes/ * riscv-opc.c: Formatting fixes. gas/ * config/tc-riscv.c: Formatting and comment fixes throughout.
2016-12-14MIPS16/GAS: Fix assertion failures with relocations on 16-bit instructionsMaciej W. Rozycki1-3/+6
Complement commit c9775dde3277 ("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support)" and report an assembly error when a relocation is required for an instruction, currently a branch only, that has been forced to use its unextended encoding, either with the use of an explicit `.t' mnemonic suffix, or by means of `.set noautoextend' being active, fixing an assertion failure currently caused instead. gas/ * config/tc-mips.c (md_convert_frag): Report an error instead of asserting on `ext'. * testsuite/gas/mips/mips16-branch-unextended-1.d: New test. * testsuite/gas/mips/mips16-branch-unextended-2.d: New test. * testsuite/gas/mips/mips16-branch-unextended-1.s: New test source. * testsuite/gas/mips/mips16-branch-unextended-2.s: New test. * testsuite/gas/mips/mips16-branch-unextended.l: New stderr output. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-13[Binutils][AARCH64]Remove Cn register for coprocessor CRn, CRm fieldRenlin Li1-15/+15
The internal CN register representation for coprocessor fields used in aarch64 sys, sysl instructions are removed in this patch. After the change, those fields are represented as immediate. Related checks are added as well. opcodes/ * aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range qualifier. (operand_general_constraint_met_p): Remove case for CP_REG. (aarch64_print_operand): Print CRn, CRm operand using imm field. * aarch64-tbl.h (QL_SYS): Use CR qualifier. (QL_SYSL): Likewise. (aarch64_opcode_table): Change CRn, CRm operand class and type. * aarch64-opc-2.c : Regenerate. * aarch64-asm-2.c : Likewise. * aarch64-dis-2.c : Likewise. include/ * opcode/aarch64.h (aarch64_operand_class): Remove AARCH64_OPND_CLASS_CP_REG. (enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn, AARCH64_OPND_Cm to AARCH64_OPND_CRm. (aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier. gas/ * config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register. (get_reg_expected_msg): Remove CN register case. (parse_operands): rewrite parser for CRn, CRm operand. (reg_names): Remove CN register. * testsuite/gas/aarch64/diagnostic.s: Add a new test case. * testsuite/gas/aarch64/diagnostic.l: Adjust error message.
2016-12-09MIPS16: Remove unused `>' operand codeMaciej W. Rozycki1-1/+0
This code has never been used throughout the repository history, and likely not before either, as due to the assymetry of MIPS16 instruction set encoding there are no 32-bit shift operations having their immediate shift count placed in the position of the usual `rx' instruction field. gas/ * config/tc-mips.c (mips16_macro_build) <'>'>: Remove case. include/ * opcode/mips.h: Remove references to `>' operand code. opcodes/ * mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
2016-12-08ARC/GAS: Correct a `spaces' global shadowing errorMaciej W. Rozycki1-5/+5
Fix a commit a9752fdf8398 ("[ARC] Sync cpu names with the ones accepted by GCC.") build regression: cc1: warnings being treated as errors .../gas/config/tc-arc.c: In function 'arc_show_cpu_list': .../gas/config/tc-arc.c:3452: error: declaration of 'spaces' shadows a global declaration .../gas/../include/libiberty.h:248: error: shadowed declaration is here make[4]: *** [tc-arc.o] Error 1 in a way following commit 91d6fa6a035c ("Add -Wshadow to the gcc command line options used when compiling the binutils."). gas/ * config/tc-arc.c (arc_show_cpu_list): Rename `spaces' local variable to `space_buf'.
2016-12-08ARM/GAS: Correct an `index' global shadowing errorMaciej W. Rozycki1-4/+4
Fix a commit 008a97eff0ca ("[GAS][ARM]Generate unpredictable warning for pc used in data processing instructions with register-shifted register operand.") build regression: cc1: warnings being treated as errors .../gas/config/tc-arm.c: In function 'encode_arm_shift': .../gas/config/tc-arm.c:7439: error: declaration of 'index' shadows a global declaration /usr/include/string.h:303: error: shadowed declaration is here make[4]: *** [tc-arm.o] Error 1 in a way following commit 91d6fa6a035c ("Add -Wshadow to the gcc command line options used when compiling the binutils."). gas/ * config/tc-arm.c (encode_arm_shift): Rename `index' local variable to `op_index'.
2016-12-07MIPS/GAS: Use local `isa' consistently in `is_opcode_valid'Maciej W. Rozycki1-1/+1
Replace a global `mips_opts.isa' reference in `is_opcode_valid' and use a local copy just made in `isa'. No functional change. gas/ * config/tc-mips.c (is_opcode_valid): Use local `isa' consistently.
2016-12-05[ARM] Add ARMv8.3 VCMLA and VCADD instructionsSzabolcs Nagy1-0/+80
Add support for VCMLA and VCADD advanced SIMD complex number instructions. The command line option is -march=armv8.3-a+fp16+simd for enabling all instructions. In arm-dis.c the formatting syntax was abused a bit to select between 0 vs 90 or 180 vs 270 or 90 vs 270 based on a bit value instead of duplicating entries in the opcode table. gas/ * config/tc-arm.c (do_vcmla, do_vcadd): Define. (neon_scalar_for_vcmla): Define. (enum operand_parse_code): Add OP_IROT1 and OP_IROT2. (NEON_ENC_TAB): Add DDSI and QQSI variants. (insns): Add vcmla and vcadd. * testsuite/gas/arm/armv8_3-a-simd.d: New. * testsuite/gas/arm/armv8_3-a-simd.s: New. * testsuite/gas/arm/armv8_3-a-simd-bad.d: New. * testsuite/gas/arm/armv8_3-a-simd-bad.l: New. * testsuite/gas/arm/armv8_3-a-simd-bad.s: New. opcodes/ * arm-dis.c (coprocessor_opcodes): Add vcmla and vcadd. (print_insn_coprocessor): Add 'V' format for neon D or Q regs.
2016-12-05[ARC] Don't check extAuxRegister second argument for sign.Claudiu Zissulescu1-11/+16
gas/ 2016-12-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textauxregister-1.d: New file. * testsuite/gas/arc/textauxregister-1.s: Likewise. * testsuite/gas/arc/textcondcode-err.s: Likewise. * testsuite/gas/arc/textcoreregister-err.s: Likewise. * config/tc-arc.c (tokenize_extregister): Return bfd_boolean, don't check second argument of extension auxiliary register for signess. (arc_extcorereg): Consider the return of tokenize_extregister function call.
2016-12-05[ARM] Add ARMv8.3 VJCVT instructionSzabolcs Nagy1-0/+18
Add support for VJCVT javascript conversion instruction. gas/ * config/tc-arm.c (arm_ext_v8_3, do_vjcvt): Define. (insns): Add vjcvt. * testsuite/gas/aarch64/armv8_3-a-fp.s: New. * testsuite/gas/aarch64/armv8_3-a-fp.d: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.s: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.d: New. * testsuite/gas/aarch64/armv8_3-a-fp-bad.l: New. opcodes/ * arm-dis.c (coprocessor_opcodes): Add vjcvt.
2016-12-05[ARM] Add ARMv8.3 command line option and feature flagSzabolcs Nagy1-0/+1
ARMv8.3 is an architectural extension of ARMv8. Add the feature macro and -march=armv8.3-a gas command line option for the ARM target. https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ * config/tc-arm.c (arm_archs): Add "armv8.3-a". * doc/c-arm.texi (-march): Add "armv8.3-a". include/ * opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New. (ARM_ARCH_V8_3A): New.
2016-12-02[ARC] Sync cpu names with the ones accepted by GCC.Claudiu Zissulescu1-22/+85
gas/ 2016-12-02 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/cpu-em-err.s: New file. * testsuite/gas/arc/cpu-em4-err.s: Likewise. * testsuite/gas/arc/cpu-fpuda-err.s: Likewise. * testsuite/gas/arc/cpu-hs-err.s: Likewise. * testsuite/gas/arc/cpu-quarkse-err.s: Likewise. * testsuite/gas/arc/noargs_a7.s: Add .cpu. * config/tc-arc.c (ARC_CPU_TYPE_A6xx): Define. (ARC_CPU_TYPE_A7xx): Likewise. (ARC_CPU_TYPE_AV2EM): Likewise. (ARC_CPU_TYPE_AV2HS): Likewise. (cpu_types): Update list of known CPU names. (arc_show_cpu_list): New function. (md_show_usage): Print accepted CPU names. (cl_features): New variable. (arc_select_cpu): Use cl_features. (arc_option): Allow various .cpu names. (md_parse_option): Set cl_features. * doc/c-arc.texi: Update -mcpu and .cpu documentation.
2016-11-29[ARC] Add checking for LP_COUNT reg usage, improve error reporting.Claudiu Zissulescu1-15/+20
gas/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (find_opcode_match): New function argument errmsg. (assemble_tokens): Collect and report the eventual error message found during opcode matching process. * testsuite/gas/arc/lpcount-err.s: New file. * testsuite/gas/arc/add_s-err.s: Update error message. opcode/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (insert_ra_chk): New function. (insert_rb_chk): Likewise. (insert_rad): Update text error message. (insert_rcd): Likewise. (insert_rhv2): Likewise. (insert_r0): Likewise. (insert_r1): Likewise. (insert_r2): Likewise. (insert_r3): Likewise. (insert_sp): Likewise. (insert_gp): Likewise. (insert_pcl): Likewise. (insert_blink): Likewise. (insert_ilink1): Likewise. (insert_ilink2): Likewise. (insert_ras): Likewise. (insert_rbs): Likewise. (insert_rcs): Likewise. (insert_simm3s): Likewise. (insert_rrange): Likewise. (insert_fpel): Likewise. (insert_blinkel): Likewise. (insert_pcel): Likewise. (insert_nps_3bit_dst): Likewise. (insert_nps_3bit_dst_short): Likewise. (insert_nps_3bit_src2_short): Likewise. (insert_nps_bitop_size_2b): Likewise. (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Likewise. (RA_CHK): Define. (RB): Adjust. (RB_CHK): Define. (RC): Adjust. * arc-dis.c (print_insn_arc): Add LOAD and STORE class. * arc-tbl.h (div, divu): All instructions are DIVREM class. Change first insn argument to check for LP_COUNT usage. (rem): Likewise. (ld, ldd): All instructions are LOAD class. Change first insn argument to check for LP_COUNT usage. (st, std): All instructions are STORE class. (mac, mpy, dmac, mul, dmpy): All instructions are MPY class. Change first insn argument to check for LP_COUNT usage. (mov): All instructions are MOVE class. Change first insn argument to check for LP_COUNT usage. include/ 2016-11-29 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (insn_class_t): Add DIVREM, LOAD, MOVE, MPY, STORE instruction classes.
2016-11-27Fix spelling in comments in .l files (gas)Ambrogino Modigliani1-1/+1
* config/bfin-lex.l: Fix spelling in comments.
2016-11-27Fix spelling in comments in C source files (gas)Ambrogino Modigliani34-67/+67
* as.h: Fix spelling in comments. * config/obj-ecoff.c: Fix spelling in comments. * config/obj-macho.c: Fix spelling in comments. * config/tc-aarch64.c: Fix spelling in comments. * config/tc-arc.c: Fix spelling in comments. * config/tc-arm.c: Fix spelling in comments. * config/tc-avr.c: Fix spelling in comments. * config/tc-cr16.c: Fix spelling in comments. * config/tc-epiphany.c: Fix spelling in comments. * config/tc-frv.c: Fix spelling in comments. * config/tc-hppa.c: Fix spelling in comments. * config/tc-hppa.h: Fix spelling in comments. * config/tc-i370.c: Fix spelling in comments. * config/tc-m68hc11.c: Fix spelling in comments. * config/tc-m68k.c: Fix spelling in comments. * config/tc-mcore.c: Fix spelling in comments. * config/tc-mep.c: Fix spelling in comments. * config/tc-metag.c: Fix spelling in comments. * config/tc-mips.c: Fix spelling in comments. * config/tc-mn10200.c: Fix spelling in comments. * config/tc-mn10300.c: Fix spelling in comments. * config/tc-nds32.c: Fix spelling in comments. * config/tc-nios2.c: Fix spelling in comments. * config/tc-ns32k.c: Fix spelling in comments. * config/tc-pdp11.c: Fix spelling in comments. * config/tc-ppc.c: Fix spelling in comments. * config/tc-riscv.c: Fix spelling in comments. * config/tc-rx.c: Fix spelling in comments. * config/tc-score.c: Fix spelling in comments. * config/tc-score7.c: Fix spelling in comments. * config/tc-sparc.c: Fix spelling in comments. * config/tc-tic54x.c: Fix spelling in comments. * config/tc-vax.c: Fix spelling in comments. * config/tc-xgate.h: Fix spelling in comments. * config/tc-xtensa.c: Fix spelling in comments. * config/tc-z80.c: Fix spelling in comments. * dwarf2dbg.c: Fix spelling in comments. * input-file.h: Fix spelling in comments. * itbl-ops.c: Fix spelling in comments. * read.c: Fix spelling in comments. * stabs.c: Fix spelling in comments. * symbols.c: Fix spelling in comments. * write.c: Fix spelling in comments. * testsuite/gas/all/itbl-test.c: Fix spelling in comments. * testsuite/gas/tic4x/opclasses.h: Fix spelling in comments.
2016-11-25gas: fix CBCOND diagnostics for invalid immediate operands.Jose E. Marchesi1-2/+3
This patch fixes two problems in the SPARC assembler: - The diagnostic message Error: Illegal operands: Immediate value in cbcond is out of range. is incorrectly issued for non-CBCOND instructions that feature a simm5 immediate field, such as MPMUL, MONTMUL, etc. - When an invalid immediate operand is used in a CBCOND instruction, two redundant error messages are issued to the user, the second due to a stale fixup (this happens since commit 85024cd8bcb93f4112470ecdbd6c10fc2aea724f). Some diagnostic tests for the CBCOND instructions are also included in the patch. Tested in both sparc64-linux-gnu and sparcv9-linux-gnu targets. gas/ChangeLog: 2016-11-25 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_ip): Avoid emitting a cbcond error messages for non-cbcond instructions. * testsuite/gas/sparc/cbcond-diag.s: New file. * testsuite/gas/sparc/cbcond-diag.l: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run cbcond-diag tests.
2016-11-23RISCV/GAS Add missing break in md_apply_fix.Kuan-Lin Chen1-0/+1
gdb/ChangeLog: * config/tc-riscv.c: Add missing break.
2016-11-22gas,opcodes: fix hardware capabilities bumping in the sparc assembler.Jose E. Marchesi1-58/+54
When the assembler finds an instruction which is part of a higher opcode architecture it bumps the current opcode architecture. For example: $ echo "mwait" | as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" However, when two instructions pertaining to the same opcode architecture but associated to different SPARC hardware capabilities are found in the input stream, and no GAS architecture is specified in the command line, the assembler bangs: $ echo "mwait; wr %g0,%g1,%mcdper" | as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" {standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr". ... and it should'nt, as WRMCDPER pertains to the same architecture level than MWAIT. This patch fixes this by extending the definition of sparc opcode architectures to contain a set of hardware capabilities and making the assembler to take these capabilities into account when updating the set of allowed hwcaps when an architecture bump is triggered by some instruction. This way, hwcaps associated to architecture levels are maintained in opcodes, while the assembler keeps the flexibiity of defining GAS architectures including additional hwcaps (like -Asparcfmaf or the v8plus* variants). A test covering this failure case is included. gas/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c: Move HWS_* and HWS2_* definitions to opcodes/sparc-opc.c. (sparc_arch): Clarify the new role of the hwcap_allowed and hwcap2_allowed fields. (sparc_arch_table): Remove HWS_* and HWS2_* instances from hwcap_allowed and hwcap2_allowed respectively. (md_parse_option): Include the opcode arch hwcaps when processing -A. (sparc_ip): Use the current opcode arch hwcaps to update hwcap_allowed, as well of the hwcaps of the instruction triggering the bump. * testsuite/gas/sparc/hwcaps-bump.s: New file. * testsuite/gas/sparc/hwcaps-bump.l: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in hwcaps-bump. include/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and hwcaps2. opcodes/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (HWS_V8): Definition moved from gas/config/tc-sparc.c. (HWS_V9): Likewise. (HWS_VA): Likewise. (HWS_VB): Likewise. (HWS_VC): Likewise. (HWS_VD): Likewise. (HWS_VE): Likewise. (HWS_VV): Likewise. (HWS_VM): Likewise. (HWS2_VM): Likewise. (sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of existing entries.
2016-11-22PR20744, Incorrect PowerPC VLE relocsAlan Modra1-18/+2
VLE 16A and 16D relocs were functionally swapped. PR 20744 include/ * opcode/ppc.h: Define VLE insns using 16A and 16D relocs. bfd/ * elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field. * elf32-ppc.c: Include opcode/ppc.h. (ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A, R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A, R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D, R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D, R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs. (ppc_elf_link_hash_table_create): Update default_params init. (ppc_elf_vle_split16): Correct shift and mask. Add params. Report or fix insn/reloc mismatches. (ppc_elf_relocate_section): Pass input_section, offset and fixup to ppc_elf_vle_split16. binutils/ * NEWS: Mention PowerPC VLE relocation error. gas/ * config/tc-ppc.c: Delete VLE insn defines. (md_assemble): Swap use_a_reloc and use_d_reloc. * testsuite/gas/ppc/vle-reloc.d: Update. ld/ * emultempl/ppc32elf.em (params): Update initializer. Handle --vle-reloc-fixup command line arg.
2016-11-21[GAS][ARM][PR20827]Fix gas error for two register form instruction (pre-UAL ↵Renlin Li1-2/+5
syntax). gas/ 2016-11-21 Renlin Li <renlin.li@arm.com> PR gas/20827 * config/tc-arm.c (encode_arm_shift): Don't assert for operands not presented. * testsuite/gas/arm/add-shift-two.d: New. * testsuite/gas/arm/add-shift-two.s: New.
2016-11-18[ARC] Fix and extend features of .cpu directive.Claudiu Zissulescu1-18/+59
gas/ 2016-11-18 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/cl-warn.s: New file. * testsuite/gas/arc/cpu-pseudop-1.d: Likewise. * testsuite/gas/arc/cpu-pseudop-1.s: Likewise. * testsuite/gas/arc/cpu-pseudop-2.d: Likewise. * testsuite/gas/arc/cpu-pseudop-2.s: Likewise. * testsuite/gas/arc/cpu-warn2.s: Likewise. * config/tc-arc.c (selected_cpu): Initialize. (feature_type): New struct. (feature_list): New variable. (arc_check_feature): New function. (arc_select_cpu): Check for .cpu duplicates. Don't overwrite the current cpu features. Check if a feature is available for a given cpu. (md_parse_option): Test if features are available for a given cpu.
2016-11-18[AArch64] Add ARMv8.3 FCMLA and FCADD instructionsSzabolcs Nagy1-0/+3
Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*. * testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.
2016-11-18[AArch64] Add ARMv8.3 combined pointer authentication load instructionsSzabolcs Nagy1-0/+21
Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.
2016-11-15Fix SPARC relocations generated for the .eh_frame section.Nick Clifton1-1/+4
PR gas/20803 * config/tc-sparc.c (cons_fix_new_sparc): Use unaligned relocs in the .eh_frame section.
2016-11-13Assemble 'bad' moxie instructionAnthony Green1-0/+7
2016-11-11[AArch64] Add ARMv8.3 PACGA instructionSzabolcs Nagy1-0/+2
Add support for the ARMv8.3 PACGA instruction. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rm_SP. opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add pacga. (AARCH64_OPERANDS): Add Rm_SP. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_Rm_SP. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (process_omitted_operand): Handle AARCH64_OPND_Rm_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/pac.s: Add pacga. * testsuite/gas/aarch64/pac.d: Add pacga.
2016-11-11[AArch64] Add ARMv8.3 command line option and feature flagSzabolcs Nagy1-0/+1
ARMv8.3 can be selected with -march=armv8.3-a command line option. An overview of the ARMv8.3 architecture extension is at https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a". * doc/c-aarch64.texi (-march): Likewise. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define. (AARCH64_ARCH_V8_3): Define. (AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-11[AArch64] Fix feature dependencies for +simd and +cryptoSzabolcs Nagy1-2/+2
According to the gas manual, +simd implies +fp and +crypto implies +simd. Make sure +nofp turns +simd, +crypto and +fp16 off. gas/ 2016-11-07 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_features): Fix "simd" and "crypto". * testsuite/gas/aarch64/illegal-crypto-nofp.d: New. * testsuite/gas/aarch64/illegal-crypto-nofp.l: New. * testsuite/gas/aarch64/illegal-fp16-nofp.d: New. * testsuite/gas/aarch64/illegal-fp16-nofp.l: New. * testsuite/gas/aarch64/illegal-fp16-nofp.s: New.
generated by cgit v1.1 at 2025-01-22 10:05:38 +0000