| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* config/tc-mips.c (load_register): Avoid too large shift.
|
|
PR 26472
PR 26473
PR 26474
* config/tc-mips.c (operand_reg_mask): Shift 1u left.
(load_register): Shift 0xffffU left.
|
|
Some versions of gcc with -Werror=format-overflow complain about using
a perfectly good 7 char buffer for "r%dr%d" when the int is between 0
and 64, apparently not seeing the value range.
note: __builtin___sprintf_chk output between 5 and 24 bytes into a destination of size 7
* config/tc-arc.c (declare_register_set): Avoid false positive
format-overflow warning.
* config/tc-epiphany.c (md_assemble): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-mmix.c (mmix_md_begin): Likewise.
* config/tc-nds32.c (nds32_elf_append_relax_relocs): Avoid false
positive "may be used uninitialized" warning.
|
|
Inserting with replacement is wrong for some gas hash table uses.
This patch implements an htab_insert that conditionally replaces, and
similarly for str_hash_insert. str_hash_insert with replace=0 is
roughly equivalent to the older hash_insert, and str_hash_insert with
replace=1 to the older hash_jam, but return values are different. I
found it useful to know whether the slot was occupied prior to
inserting/replacing. I've also reinstated the fatal errors on messing
up opcode tables with duplicates.
PR 26513
* hash.h (htab_insert): Update prototype and comment.
(struct string_tuple): Make "value" a const void*.
(string_tuple_alloc): Likewise.
(str_hash_find, str_hash_find_n): Cast returned value.
(str_hash_insert): Add "replace" parameter, and return slot pointer.
Free alloc'd element when not inserted.
* hash.c (htab_insert): Likewise. Return slot when element exists,
otherwise return NULL.
* read.c (pop_insert): Insert into hash table without first searching.
* config/tc-avr.c (md_begin): Likewise.
* config/tc-msp430.c (md_begin): Likewise.
* config/tc-nds32.c (nds32_init_nds32_pseudo_opcodes): Likewise.
* config/tc-v850.c (md_begin): Likewise.
* macro.c (do_formals, define_macro, macro_expand_body): Likewise.
(delete_macro): Delete from hash table.
* config/tc-tic54x.c (subsym_create_or_replace): Correct logic.
* symbols.c (local_symbol_make, symbol_table_insert): Allow
replacement of hash table entries.
* config/obj-coff-seh.c (seh_hash_insert): Likewise.
* config/obj-coff.c (tag_insert): Likewise.
* config/tc-iq2000.c (iq2000_add_macro): Likewise.
* config/tc-m68k.c (md_begin): Likewise for aliases.
* config/tc-tic4x.c (tic4x_asg): Likewise.
* config/tc-tic6x.c (md_begin): Likewise.
* dw2gencfi.c (dwcfi_hash_find_or_make): Disallow replacement of
hash table entries.
* ecoff.c (add_string, get_tag): Likewise.
* macro.c (expand_irp): Likewise.
* config/obj-elf.c (build_additional_section_info): Likewise.
* config/tc-aarch64.c (insert_reg_alias): Likewise.
(checked_hash_insert): Likewise.
* config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise.
* config/tc-arc.c (arc_insert_opcode, declare_register): Likewise.
(declare_addrtype, md_begin, arc_extcorereg): Likewise.
* config/tc-arm.c (insert_reg_alias): Likewise.
(arm_tc_equal_in_insn, md_begin): Likewise.
* config/tc-cr16.c (initialise_reg_hash_table, md_begin): Likewise.
* config/tc-cris.c (md_begin): Likewise.
* config/tc-crx.c (md_begin): Likewise.
* config/tc-csky.c (md_begin): Likewise.
* config/tc-d10v.c (md_begin): Likewise.
* config/tc-dlx.c (md_begin): Likewise.
* config/tc-ft32.c (md_begin): Likewise.
* config/tc-h8300.c (md_begin): Likewise.
* config/tc-hppa.c (md_begin): Likewise.
* config/tc-i386.c (md_begin): Likewise.
* config/tc-ia64.c (dot_rot, dot_entry, declare_register): Likewise.
(md_begin, dot_alias): Likewise.
* config/tc-m68hc11.c (md_begin): Likewise.
* config/tc-m68k.c (md_begin): Likewise.
* config/tc-mcore.c (md_begin): Likewise.
* config/tc-microblaze.c (md_begin): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-mmix.c (md_begin): Likewise.
* config/tc-mn10200.c (md_begin): Likewise.
* config/tc-mn10300.c (md_begin): Likewise.
* config/tc-moxie.c (md_begin): Likewise.
* config/tc-nds32.c (nds32_relax_hint, md_begin): Likewise.
* config/tc-nios2.c (md_begin): Likewise.
* config/tc-ns32k.c (md_begin): Likewise.
* config/tc-pdp11.c (md_begin): Likewise.
* config/tc-pj.c (fake_opcode, md_begin): Likewise.
* config/tc-ppc.c (ppc_setup_opcodes): Likewise.
* config/tc-pru.c (md_begin): Likewise.
* config/tc-riscv.c (init_ext_version_hash): Likewise.
(init_opcode_names_hash, hash_reg_name, init_opcode_hash): Likewise.
(riscv_init_csr_hash): Likewise.
* config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
* config/tc-score.c (s3_insert_reg): Likewise.
(s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh, s7_insert_reg): Likewise.
* config/tc-sh.c (md_begin): Likewise.
* config/tc-sparc.c (md_begin): Likewise.
* config/tc-spu.c (md_begin): Likewise.
* config/tc-tic30.c (md_begin): Likewise.
* config/tc-tic4x.c (tic4x_inst_insert): Likewise.
* config/tc-tic54x.c (stag_add_field_symbols, md_begin): Likewise.
(tic54x_endstruct, tic54x_var, tic54x_macro_info): Likewise.
(subsym_substitute): Likewise.
* config/tc-tilegx.c (md_begin): Likewise.
* config/tc-tilepro.c (md_begin): Likewise.
* config/tc-vax.c (vip_begin): Likewise.
* config/tc-wasm32.c (md_begin): Likewise.
* config/tc-xgate.c (md_begin): Likewise.
* config/tc-z8k.c (md_begin): Likewise.
* testsuite/gas/ppc/dcbt.d,
* testsuite/gas/ppc/dcbt.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
* ecoff.c (add_string): Report fatal error on duplicates.
* config/tc-alpha.c (md_begin): Likewise.
* config/tc-arc.c (arc_insert_opcode, declare_register): Likewise.
(declare_addrtype, md_begin, arc_extcorereg): Likewise.
* config/tc-cr16.c (initialise_reg_hash_table, md_begin): Likewise.
* config/tc-cris.c (md_begin): Likewise.
* config/tc-crx.c (md_begin): Likewise.
* config/tc-dlx.c (md_begin): Likewise.
* config/tc-hppa.c (md_begin): Likewise.
* config/tc-i386.c (md_begin): Likewise.
* config/tc-ia64.c (dot_rot, dot_entry, declare_register): Likewise.
(md_begin): Likewise.
* config/tc-m68k.c (md_begin): Likewise.
* config/tc-mips.c (md_begin): Likewise.
* config/tc-nios2.c (md_begin): Likewise.
* config/tc-ns32k.c (md_begin): Likewise.
* config/tc-ppc.c (ppc_setup_opcodes): Likewise.
* config/tc-pru.c (md_begin): Likewise.
* config/tc-riscv.c (init_ext_version_hash): Likewise.
(init_opcode_names_hash, hash_reg_name, init_opcode_hash): Likewise.
* config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
* config/tc-sparc.c (md_begin): Likewise.
* config/tc-tic30.c (md_begin): Likewise.
* config/tc-tic4x.c (tic4x_inst_insert): Likewise.
* config/tc-tilegx.c (md_begin): Likewise.
* config/tc-tilepro.c (md_begin): Likewise.
* config/tc-vax.c (vip_begin): Likewise.
* config/tc-alpha.c,
* config/tc-arm.c,
* config/tc-avr.c,
* config/tc-cr16.c,
* config/tc-csky.c,
* config/tc-i386.c,
* config/tc-m68hc11.c,
* config/tc-m68k.c,
* config/tc-microblaze.c,
* config/tc-ns32k.c,
* config/tc-pj.c,
* config/tc-ppc.c,
* config/tc-score.c,
* config/tc-score7.c,
* config/tc-tic4x.c,
* config/tc-tic54x.c,
* config/tc-tilegx.c,
* config/tc-tilepro.c,
* config/tc-xgate.c: Formatting.
|
|
These functions take an offset within frag, frag within section, and
section parameter. So it makes sense to order the parameters as
section, frag, offset.
* symbols.h (symbol_new, symbol_create, local_symbol_make),
(symbol_temp_new): Arrange params as section, frag, offset.
* symbols.c: Adjust to suit.
* as.c: Likewise.
* cgen.c: Likewise.
* dwarf2dbg.c: Likewise.
* ecoff.c: Likewise.
* expr.c: Likewise.
* itbl-ops.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
* subsegs.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-elf.c: Likewise.
* config/obj-macho.c: Likewise.
* config/tc-aarch64.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-avr.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-cris.c: Likewise.
* config/tc-csky.c: Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-hppa.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-m32r.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-mn10200.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/tc-nds32.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-ppc.c: Likewise.
* config/tc-riscv.c: Likewise.
* config/tc-s390.c: Likewise.
* config/tc-sh.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
|
|
* config/obj-coff-seh.c (seh_hash_insert): Port to use new
str_htab type.
(seh_hash_find): Likewise.
(seh_hash_find_or_make): Likewise.
* config/obj-coff.c (tag_init): Likewise.
(tag_insert): Likewise.
(tag_find): Likewise.
* config/obj-elf.c (struct group_list): Likewise.
(build_additional_section_info): Likewise.
(free_section_idx): Likewise.
(elf_adjust_symtab): Likewise.
(elf_frob_file_after_relocs): Likewise.
* config/tc-aarch64.c (INSN_SIZE): Likewise.
(parse_reg): Likewise.
(insert_reg_alias): Likewise.
(create_register_alias): Likewise.
(s_unreq): Likewise.
(parse_shift): Likewise.
(parse_pldop): Likewise.
(parse_barrier): Likewise.
(parse_barrier_psb): Likewise.
(parse_bti_operand): Likewise.
(parse_sys_reg): Likewise.
(parse_sys_ins_reg): Likewise.
(lookup_mnemonic): Likewise.
(opcode_lookup): Likewise.
(parse_operands): Likewise.
(checked_hash_insert): Likewise.
(sysreg_hash_insert): Likewise.
(fill_instruction_hash_table): Likewise.
(md_begin): Likewise.
* config/tc-alpha.c (struct alpha_reloc_tag): Likewise.
(get_alpha_reloc_tag): Likewise.
(assemble_tokens_to_insn): Likewise.
(assemble_tokens): Likewise.
(md_begin): Likewise.
* config/tc-arc.c (arc_find_opcode): Likewise.
(arc_insert_opcode): Likewise.
(find_opcode_match): Likewise.
(declare_register): Likewise.
(declare_addrtype): Likewise.
(md_begin): Likewise.
(arc_parse_name): Likewise.
(tc_arc_regname_to_dw2regnum): Likewise.
(arc_extcorereg): Likewise.
* config/tc-arm.c (MVE_BAD_QREG): Likewise.
(arm_reg_parse_multi): Likewise.
(parse_reloc): Likewise.
(insert_reg_alias): Likewise.
(create_register_alias): Likewise.
(s_unreq): Likewise.
(parse_shift): Likewise.
(parse_psr): Likewise.
(parse_cond): Likewise.
(parse_barrier): Likewise.
(do_vfp_nsyn_opcode): Likewise.
(opcode_lookup): Likewise.
(arm_tc_equal_in_insn): Likewise.
(md_begin): Likewise.
* config/tc-avr.c (md_begin): Likewise.
(avr_ldi_expression): Likewise.
(md_assemble): Likewise.
(avr_update_gccisr): Likewise.
(avr_emit_insn): Likewise.
* config/tc-cr16.c (get_register): Likewise.
(get_register_pair): Likewise.
(get_index_register): Likewise.
(get_index_register_pair): Likewise.
(get_pregister): Likewise.
(get_pregisterp): Likewise.
(initialise_reg_hash_table): Likewise.
(md_begin): Likewise.
(cr16_assemble): Likewise.
(md_assemble): Likewise.
* config/tc-cris.c (cris_insn_first_word_frag): Likewise.
(md_begin): Likewise.
(cris_process_instruction): Likewise.
* config/tc-crx.c (get_register): Likewise.
(get_copregister): Likewise.
(md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-csky.c (md_begin): Likewise.
(parse_opcode): Likewise.
(get_operand_value): Likewise.
(v1_work_jbsr): Likewise.
(v2_work_rotlc): Likewise.
(v2_work_bgeni): Likewise.
(v2_work_not): Likewise.
* config/tc-d10v.c (sizeof): Likewise.
(md_begin): Likewise.
(do_assemble): Likewise.
(md_apply_fix): Likewise.
* config/tc-d30v.c (sizeof): Likewise.
(md_begin): Likewise.
(do_assemble): Likewise.
* config/tc-dlx.c (RELOC_DLX_VTENTRY): Likewise.
(md_begin): Likewise.
(machine_ip): Likewise.
* config/tc-ft32.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-h8300.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-hppa.c (pa_ip): Likewise.
(md_begin): Likewise.
* config/tc-i386.c (md_begin): Likewise.
(i386_print_statistics): Likewise.
(parse_insn): Likewise.
(process_operands): Likewise.
(i386_index_check): Likewise.
(parse_real_register): Likewise.
* config/tc-ia64.c (dot_rot): Likewise.
(dot_entry): Likewise.
(declare_register): Likewise.
(md_begin): Likewise.
(ia64_parse_name): Likewise.
(md_assemble): Likewise.
(dot_alias): Likewise.
(do_alias): Likewise.
(ia64_adjust_symtab): Likewise.
(do_secalias): Likewise.
(ia64_frob_file): Likewise.
* config/tc-m68hc11.c (m68hc11_print_statistics): Likewise.
(md_begin): Likewise.
(print_insn_format): Likewise.
(md_assemble): Likewise.
* config/tc-m68k.c (tc_gen_reloc): Likewise.
(m68k_ip): Likewise.
(md_begin): Likewise.
* config/tc-mcore.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-microblaze.c (md_begin): Likewise.
(md_assemble): Likewise.
(md_apply_fix): Likewise.
* config/tc-mips.c (nopic_need_relax): Likewise.
(md_begin): Likewise.
(macro_build): Likewise.
(mips16_macro_build): Likewise.
(mips_lookup_insn): Likewise.
(mips_ip): Likewise.
(mips16_ip): Likewise.
* config/tc-mmix.c (sizeof): Likewise.
(mmix_md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-mn10200.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-mn10300.c (HAVE_AM30): Likewise.
(md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-moxie.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-msp430.c (md_begin): Likewise.
(msp430_operands): Likewise.
(md_assemble): Likewise.
* config/tc-nds32.c (PV_DONT_CARE): Likewise.
(builtin_isreg): Likewise.
(builtin_regnum): Likewise.
(nds32_init_nds32_pseudo_opcodes): Likewise.
(nds32_lookup_pseudo_opcode): Likewise.
(nds32_relax_hint): Likewise.
(md_begin): Likewise.
(nds32_find_reloc_table): Likewise.
(nds32_elf_append_relax_relocs_traverse): Likewise.
(nds32_relax_branch_instructions): Likewise.
(md_convert_frag): Likewise.
(nds32_elf_analysis_relax_hint): Likewise.
(tc_nds32_regname_to_dw2regnum): Likewise.
* config/tc-nios2.c (nios2_opcode_lookup): Likewise.
(nios2_reg_lookup): Likewise.
(nios2_ps_lookup): Likewise.
(md_begin): Likewise.
* config/tc-ns32k.c (struct hash_control): Likewise.
(parse): Likewise.
(md_begin): Likewise.
* config/tc-pdp11.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-pj.c (fake_opcode): Likewise.
(alias): Likewise.
(md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-ppc.c (ppc_setup_opcodes): Likewise.
(md_assemble): Likewise.
* config/tc-pru.c (pru_opcode_lookup): Likewise.
(pru_reg_lookup): Likewise.
(md_begin): Likewise.
(md_end): Likewise.
* config/tc-riscv.c (init_ext_version_hash): Likewise.
(riscv_get_default_ext_version): Likewise.
(riscv_set_arch): Likewise.
(init_opcode_names_hash): Likewise.
(opcode_name_lookup): Likewise.
(enum reg_class): Likewise.
(hash_reg_name): Likewise.
(riscv_init_csr_hash): Likewise.
(reg_csr_lookup_internal): Likewise.
(reg_lookup_internal): Likewise.
(init_opcode_hash): Likewise.
(md_begin): Likewise.
(DECLARE_CSR): Likewise.
(macro_build): Likewise.
(riscv_ip): Likewise.
* config/tc-s390.c (register_name): Likewise.
(s390_setup_opcodes): Likewise.
(md_begin): Likewise.
(md_assemble): Likewise.
(s390_insn): Likewise.
* config/tc-score.c (struct s3_reg_map): Likewise.
(s3_score_reg_parse): Likewise.
(s3_dependency_type_from_insn): Likewise.
(s3_parse_16_32_inst): Likewise.
(s3_parse_48_inst): Likewise.
(s3_insert_reg): Likewise.
(s3_build_reg_hsh): Likewise.
(s3_build_score_ops_hsh): Likewise.
(s3_build_dependency_insn_hsh): Likewise.
(s3_begin): Likewise.
* config/tc-score7.c (struct s7_reg_map): Likewise.
(s7_score_reg_parse): Likewise.
(s7_dependency_type_from_insn): Likewise.
(s7_parse_16_32_inst): Likewise.
(s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
(s7_insert_reg): Likewise.
(s7_build_reg_hsh): Likewise.
(s7_begin): Likewise.
* config/tc-sh.c (EMPTY): Likewise.
(md_begin): Likewise.
(find_cooked_opcode): Likewise.
* config/tc-sparc.c (md_begin): Likewise.
(sparc_ip): Likewise.
* config/tc-spu.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-tic30.c (md_begin): Likewise.
(tic30_operand): Likewise.
(tic30_parallel_insn): Likewise.
(md_assemble): Likewise.
* config/tc-tic4x.c (TIC4X_ALT_SYNTAX): Likewise.
(tic4x_asg): Likewise.
(tic4x_inst_insert): Likewise.
(tic4x_inst_add): Likewise.
(md_begin): Likewise.
(tic4x_operand_parse): Likewise.
(md_assemble): Likewise.
* config/tc-tic54x.c (MAX_SUBSYM_HASH): Likewise.
(stag_add_field_symbols): Likewise.
(tic54x_endstruct): Likewise.
(tic54x_tag): Likewise.
(tic54x_remove_local_label): Likewise.
(tic54x_clear_local_labels): Likewise.
(tic54x_var): Likewise.
(tic54x_macro_start): Likewise.
(tic54x_macro_info): Likewise.
(tic54x_macro_end): Likewise.
(subsym_isreg): Likewise.
(subsym_structsz): Likewise.
(md_begin): Likewise.
(is_mmreg): Likewise.
(is_type): Likewise.
(encode_condition): Likewise.
(encode_cc3): Likewise.
(encode_cc2): Likewise.
(encode_operand): Likewise.
(tic54x_parse_insn): Likewise.
(tic54x_parse_parallel_insn_firstline): Likewise.
(subsym_create_or_replace): Likewise.
(subsym_lookup): Likewise.
(subsym_substitute): Likewise.
(tic54x_undefined_symbol): Likewise.
* config/tc-tic6x.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-tilegx.c (O_hw2_last_plt): Likewise.
(INSERT_SPECIAL_OP): Likewise.
(md_begin): Likewise.
(tilegx_parse_name): Likewise.
(parse_reg_expression): Likewise.
(md_assemble): Likewise.
* config/tc-tilepro.c (O_tls_ie_load): Likewise.
(INSERT_SPECIAL_OP): Likewise.
(tilepro_parse_name): Likewise.
(parse_reg_expression): Likewise.
(md_assemble): Likewise.
* config/tc-v850.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-vax.c (md_ri_to_chars): Likewise.
(vip_begin): Likewise.
(vip): Likewise.
(main): Likewise.
(md_begin): Likewise.
* config/tc-wasm32.c (md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-xgate.c (xgate_parse_operand): Likewise.
(md_begin): Likewise.
(md_assemble): Likewise.
* config/tc-z8k.c (md_begin): Likewise.
(md_assemble): Likewise.
|
|
Ever since commit 4d7206a284ee ("Rework MIPS macro relaxation, fix string
merging bug"), <https://sourceware.org/ml/binutils/2004-01/msg00248.html>,
`prev_reloc_op_frag' has only been set and never used. Remove it then.
gas/
* config/tc-mips.c (prev_reloc_op_frag): Remove variable.
(my_getSmallExpression): Adjust accordingly.
|
|
* config/tc-csky.c (get_operand_value): Rewrite 1 << 31 expressions
to avoid signed overflow.
* config/tc-mcore.c (md_assemble): Likewise.
* config/tc-mips.c (gpr_read_mask, gpr_write_mask): Likewise.
* config/tc-nds32.c (SET_ADDEND): Likewise.
* config/tc-nios2.c (nios2_assemble_arg_R): Likewise.
|
|
This patch arranges for symbols defined in .sdata and .sbss to be
reported by nm with 'g' and 's' flags, for coff targets that support
.sdata and .sbss.
The assembler changes regarding SEC_SMALL_DATA are really just
documentation. As far as I'm aware, this won't change any assembler
output.
bfd/
* coff-alpha.c (alpha_ecoff_le_vec): Add SEC_SMALL_DATA to
applicable section flags.
* coff-mips.c (mips_ecoff_le_vec, mips_ecoff_be_vec): Likewise.
(mips_ecoff_bele_vec): Likewise.
* coffcode.h (sec_to_styp_flags): Set SEC_SMALL_DATA for .sdata
and .sbss sections.
* ecoff.c (_bfd_ecoff_new_section_hook): Likewise.
(_bfd_ecoff_styp_to_sec_flags): Likewise.
gas/
* config/tc-m32r.c (md_begin): Set SEC_SMALL_DATA on .scommon section.
* config/tc-mips.c (s_change_sec): Set SEC_SMALL_DATA for .sdata
and .sbss sections.
* config/tc-score.c: Delete !BFD_ASSEMBLER code throughout.
(s3_s_change_sec): Set SEC_SMALL_DATA for .sbss section.
(s3_s_score_lcomm): Likewise.
* config/tc-score7.c: Similarly.
* read.c (bss_alloc): Set SEC_SMALL_DATA for .sbss section.
|
|
When there is multi-labels on the same insn, the current code
will take care about the last one. it may cause that no sync
is added at the target.
Here we scan all labels with same value of
S_GET_VALUE(label_list->label)
by label_list->next.
2020-02-28 YunQiang Su <syq@debian.org>
PR gas/25539
* config/tc-mips.c (fix_loongson3_llsc): Compare label value
to handle multi-labels.
(has_label_name): New.
|
|
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
|
|
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
gas/
* config/tc-mips.c (fix_bad_misaligned_address): New function.
(fix_validate_branch): Call fix_bad_misaligned address_to
calculate the target address.
(md_apply_fix): Likewise.
(md_convert_frag): Update misaligned address calculation to
disregard ISA mode bit.
|
|
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
|
|
git commit f2d4ba38f5 caused many failures for mips-sgi-irix targets,
and added a new test that failed for aarch64, nds32, and rl78.
The mips failures are due to BSF_OBJECT being set in many cases for
symbols by the mips .global/.globl directive. This patch removes that
code and instead sets BSF_OBJECT in a target frob_symbol function,
also moving the mips hacks in elf_frob_symbol to the new function.
Note that common symbols are handled fine in elf.c:swap_out_syms
without needing to set BSF_OBJECT, so that old code can disappear.
* config/obj-elf.c (elf_frob_symbol): Remove mips hacks.
* config/tc-mips.h (tc_frob_symbol): Define.
(mips_frob_symbol): Declare.
* config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix.
(mips_frob_symbol): Fudge symbols for irix here.
* testsuite/gas/elf/type-2.e: Allow random target symbols.
|
|
When MTHC1 instruction is paired with MTC1 to write a value to a
64-bit FPR, the MTC1 must be executed first, because the semantic
definition of MTC1 is not aware that software will be using an MTHC1
to complete the operation, and sets the upper half of the 64-bit FPR
to an UNPREDICTABLE value[1].
Fix the order of MTHC1 and MTC1 instructions in LI macro expansion.
Modify the expansions to exploit moves from $zero directly by-passing
the use of $AT, where ever possible.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Wave Computing, Inc., Document
Number: MD00086, Revision 5.04, December 11, 2013, Section 3.2
"Alphabetical List of Instructions", pp. 217.
gas/
* config/tc-mips.c (macro) <M_LI>: Re-order MTHC1 with
respect to MTC1 and use $0 for either part where possible.
* testsuite/gas/mips/li-d.s: Add test cases for non-zero
words in double precision constants.
* testsuite/gas/mips/li-d.d: Update reference output.
* testsuite/gas/mips/micromips@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips64r2@isa-override-1.d: Likewise.
|
|
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
|
|
with address sanitization enabled.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
|
|
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
|
|
Add paired load-link and store-conditional instructions to the
EVA ASE for MIPS32R6[1]. These instructions are optional within
the EVA ASE. Their presence is indicated by the XNP bit in the
Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 230-231, pp. 357-360.
gas/
* config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6.
(macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases.
(mips_after_parse_args): Translate EVA to EVA_R6.
* testsuite/gas/mips/ase-errors-1.s: Add new instructions.
* testsuite/gas/mips/eva.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Check errors for
new instructions.
* testsuite/gas/mips/mipsr6@eva.d: Check new test cases.
include/
* opcode/mips.h (ASE_EVA_R6): New macro.
(M_LLWPE_AB, M_SCWPE_AB): New enum values.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Add ISA
argument and set ASE_EVA_R6 appropriately.
(set_default_mips_dis_options): Pass ISA to above.
(parse_mips_dis_option): Likewise.
* mips-opc.c (EVAR6): New macro.
(mips_builtin_opcodes): Add llwpe, scwpe.
Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
|
|
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions
that were omitted from the initial spec. These instructions
are optional in implementations but not associated with any
ASE or pseudo-ASE. Their presence is indicated by the XNP bit
in the Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 228-229, pp. 354-357.
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 289-290 and pp. 458-460.
gas/
* config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB,
M_SCDP_AB>: New cases and expansions for paired instructions.
* testsuite/gas/mips/llpscp-32.s: New test source.
* testsuite/gas/mips/llpscp-64.s: Likewise.
* testsuite/gas/mips/llpscp-32.d: New test.
* testsuite/gas/mips/llpscp-64.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/r6.s: Add new instructions to test source.
* testsuite/gas/mips/r6-64.s: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Check new instructions.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likwwise.
* testsuite/gas/mips/r6.d: Likewise.
include/
* opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values.
(M_SCWP_AB, M_SCDP_AB): Likewise.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
|
|
gas/
* config/tc-mips.c (match_non_zero_reg_operand): Update
warning message.
* testsuite/gas/mips/r6-branch-constraints.l: Likewise.
|
|
Another field that only stores unsigned values.
* write.h (struct fix <fx_where>): Make unsigned.
(fix_new, fix_at_start, fix_new_exp): Adjust prototypes.
* write.c (fix_new, fix_new_exp, fix_at_start): Make "where" and
"size" parameters unsigned long.
(fix_new_internal): Likewise. Adjust error format string to suit.
* config/tc-mips.c (md_convert_frag): Remove cast of fx_where.
* config/tc-sparc.c (md_apply_fix): Likewise.
* config/tc-score.c (s3_convert_frag): Adjust for unsigned fx_where.
* config/tc-score7.c (s7_convert_frag): Likewise.
|
|
The field only stores unsigned values, so let's make it unsigned to
stop people worrying about the possibility of negative values.
* frags.h (struct frag <fr_fix>): Use unsigned type.
* frags.c (frag_new): Assert that current size exceeds
old_frags_var_max_size.
* ehopt.c (get_cie_info): Adjust for unsigned fr_fix.
* listing.c (calc_hex): Likewise.
* write.c (cvt_frag_to_fill, write_relocs): Likewise.
* config/tc-arc.c (md_convert_frag): Likewise.
* config/tc-avr.c (avr_patch_gccisr_frag): Likewise.
* config/tc-mips.c (md_convert_frag): Likewise.
* config/tc-rl78.c (md_convert_frag): Likewise.
* config/tc-rx.c (md_convert_frag): Likewise.
* config/tc-sparc.c (md_apply_fix): Likewise.
* config/tc-xtensa.c (next_instrs_are_b_retw): Likewise.
(unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise.
|
|
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
GAS does not enable implicit ASEs for most MIPS processors.
The rework of option handling done as part of .module implementation
left the implicit ASE logic broken and default enabled ASEs for
most processors did not get applied. This patch ensures the ASE
information is carried forward to the point where it is required.
gas/
* config/tc-mips.c (mips_set_options) <init_ase>: New field.
(file_mips_opts, mips_opts) <init_ase>: Initialize new field.
(file_mips_check_options): Propagate initial ASE settings.
(mips_after_parse_args, parse_code_option): Track the initial
ASE settings for a CPU.
(s_mipsset): Restore the initial ASE settings when reverting
to the default arch.
* testsuite/gas/mips/elf_mach_p6600.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
|
|
* NEWS: Mention -m[no-]fix-loongson3-llsc.
* configure.ac: Add --enable-mips-fix-loongson3-llsc.
Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC.
* config.in: Regenerated.
* configure: Likewise.
* config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc):
New variables.
(options): New OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_longopts): Add -m[no-]fix-loongson3-llsc.
(md_begin): Initialize sync insn.
(fix_loongson3_llsc): New.
(append_insn): Call fix_loongson3_llsc.
(md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_show_usage): Display -m[no-]fix-loongson3-llsc.
* doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc,
--enable-mips-fix-loongson3-llsc=[yes|no].
|
|
|
|
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
|
|
and extends its test with the border cases of six and seven instructions.
* testsuite/gas/mips/r5900.s: Extend the R5900 short loop fix
test with border cases.
* testsuite/gas/mips/r5900.d: Add extra expected disassembly.
* config/tc-mips.c (can_swap_branch_p): Clarify the R5900 short
loop hardware bug conditions. Correct note on the R5900
instruction count short loop fix.
|
|
bfd/
* archures.c (bfd_architecture): New machine
bfd_mach_mips_gs264e.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle
E_MIPS_MACH_GS264E.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Map bfd_mach_mips_gs264e to
bfd_mach_mips_gs464e extension.
binutils/
* NEWS: Mention Loongson 2K1000 proccessor support.
* readelf.c (get_machine_flags): Handle gs264e.
elfcpp/
* mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E.
(mips_cpu_info_table): Add gs264e descriptors.
* doc/as.texi (march table): Add gs264e.
include/
* elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E.
* opcode/mips.h (CPU_XXX): New CPU_GS264E.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination
gs264e and gs464e.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs264e descriptors.
|
|
bfd/
* archures.c (bfd_architecture): New machine
bfd_mach_mips_gs464e.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle
E_MIPS_MACH_GS464E.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Map bfd_mach_mips_gs464e to
bfd_mach_mips_gs464 extension.
binutils/
* NEWS: Mention Loongson 3A2000/3A3000 proccessor support.
* readelf.c (get_machine_flags): Handle gs464e.
elfcpp/
* mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E.
(mips_cpu_info_table): Add gs464e descriptors.
* doc/as.texi (march table): Add gs464e.
include/
* elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E.
* opcode/mips.h (CPU_XXX): New CPU_GS464E.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination
gs464e and gs464.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs464e descriptors.
|
|
bfd/
* archures.c (bfd_architecture): Rename
bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Likewise.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Likewise.
(bfd_mips_isa_ext_mach): Likewise.
(bfd_mips_isa_ext): Likewise.
(print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A.
binutils/
* NEWS: Mention Loongson 3A1000 proccessor support.
* readelf.c (get_machine_flags): Rename loongson-3a to gs464.
(print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A.
elfcpp/
* mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to
E_MIPS_MACH_GS464.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename
CPU_LOONGSON_3A to CPU_GS464.
(mips_cpu_info_table): Add gs464 descriptors, Keep
loongson3a as an alias of gs464 for compatibility.
* doc/as.texi (march table): Rename loongson3a to gs464.
* testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension"
flag to None.
gold/
* mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach):
Rename loongson3a to gs464.
(mips_isa_ext_mach, mips_isa_ext): Delete loongson3a.
(infer_abiflags): Use ases instead of isa_ext for infer ABI
flags.
(elf_mips_mach_name): Rename loongson3a to gs464.
include/
* elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to
E_MIPS_MACH_GS464.
(AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A.
* opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A.
(CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464.
* opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a
to gs464.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep
loongson3a as an alias of gs464 for compatibility.
* mips-opc.c (mips_opcodes): Change Comments.
|
|
bfd/
* elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension.
binutils/
* readelf.c (print_mips_ases): Add Loongson EXT2 extension.
gas/
* NEWS: Mention Loongson EXTensions R2 (EXT2) support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and
OPTION_NO_LOONGSON_EXT2.
(md_longopts): Likewise.
(mips_ases): Define availability for EXT.
(mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to
AFL_ASE_LOONGSON_EXT2.
(md_show_usage): Add help for -mloongson-ext2 and
-mno-loongson-ext2.
* doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2.
* doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2,
.set loongson-ext2 and .set noloongson-ext2.
* testsuite/gas/mips/loongson-ext2.d: New test.
* testsuite/gas/mips/loongson-ext2.s: New test.
* testsuite/gas/mips/mips.exp: Run loongson-ext2 test.
include/
* elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2.
* opcode/mips.h (ASE_LOONGSON_EXT2): New macro.
opcodes/
* mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext
option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (LEXT2): New macro.
(mips_opcodes): Add cto, ctz, dcto, dctz instructions.
|
|
bfd/
* elfxx-mips.c (infer_mips_abiflags): Use ases instead of
isa_ext for infer ABI flags.
(print_mips_ases): Add Loongson EXT extension.
binutils/
* readelf.c (print_mips_ases): Add Loongson EXT extension.
elfcpp/
* mips.h (AFL_ASE_LOONGSON_EXT): New enum.
gas/
* NEWS: Mention Loongson EXTensions (EXT) support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and
OPTION_NO_LOONGSON_EXT.
(md_longopts): Likewise.
(mips_ases): Define availability for EXT.
(mips_convert_ase_flags): Map ASE_LOONGSON_EXT to
AFL_ASE_LOONGSON_EXT.
(mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a.
(md_show_usage): Add help for -mloongson-ext and
-mno-loongson-ext.
* doc/as.texi: Document -mloongson-ext, -mno-loongson-ext.
* doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext,
.set loongson-ext and .set noloongson-ext.
* testsuite/gas/mips/loongson-mmi.d: Add ASE flag.
include/
* elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT.
* opcode/mips.h (ASE_LOONGSON_EXT): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add EXT to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-ext option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (IL3A): Delete.
* mips-opc.c (LEXT): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT
instructions.
|
|
bfd/
* elfxx-mips.c (print_mips_ases): Add CAM extension.
binutils/
* readelf.c (print_mips_ases): Add CAM extension.
gas/
* NEWS: Mention Loongson Content Address Memory (CAM)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and
OPTION_NO_LOONGSON_CAM.
(md_longopts): Likewise.
(mips_ases): Define availability for CAM.
(mips_convert_ase_flags): Map ASE_LOONGSON_CAM to
AFL_ASE_LOONGSON_CAM.
(mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a.
(md_show_usage): Add help for -mloongson-cam and
-mno-loongson-cam.
* doc/as.texi: Document -mloongson-cam, -mno-loongson-cam.
* doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam,
.set loongson-cam and .set noloongson-cam.
* testsuite/gas/mips/loongson-3a-2.d: Move cam test to ...
* testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a-2.s: Move cam test to ...
* testsuite/gas/mips/loongson-cam.s: Here.
* testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag.
* testsuite/gas/mips/mips.exp: Run loongson-cam test.
include/
* elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM.
* opcode/mips.h (ASE_LOONGSON_CAM): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add CAM to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-cam option.
(print_mips_disassembler_options): Document -M loongson-cam.
* mips-opc.c (LCAM): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM
instructions.
|
|
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
|
|
In the microMIPS mode also accept %half, %got, %call, %got_hi, %got_lo,
%call_hi, %call_lo, %neg, %got_page, %highest, %got_disp, %tlsgd,
%tlsldm, %dtprel_hi, %dtprel_lo, %gottprel, %tprel_hi and %tprel_lo
percent-ops with macros, so that they can be used with instructions that
expand into sequences if relocation is required due to their limited
offset span, such as LL, LWL, etc., fixing GAS assertions:
.../gas/testsuite/gas/mips/elf-rel28.s: Assembler messages:
.../gas/testsuite/gas/mips/elf-rel28.s:17: Internal error in macro_build at .../gas/config/tc-mips.c:8854.
Please report this bug.
observed if an attempt is made to assemble the `elf-rel28.s' test case
modified to use one of the affected instructions to microMIPS code.
gas/
* config/tc-mips.c (macro_build) <'i', 'j'>: Also accept
BFD_RELOC_16, BFD_RELOC_MIPS_GOT16, BFD_RELOC_MIPS_CALL16,
BFD_RELOC_MIPS_GOT_HI16, BFD_RELOC_MIPS_GOT_LO16,
BFD_RELOC_MIPS_CALL_HI16, BFD_RELOC_MIPS_CALL_LO16,
BFD_RELOC_MIPS_SUB, BFD_RELOC_MIPS_GOT_PAGE,
BFD_RELOC_MIPS_HIGHEST, BFD_RELOC_MIPS_GOT_DISP,
BFD_RELOC_MIPS_TLS_GD, BFD_RELOC_MIPS_TLS_LDM,
BFD_RELOC_MIPS_TLS_DTPREL_HI16, BFD_RELOC_MIPS_TLS_DTPREL_LO16,
BFD_RELOC_MIPS_TLS_GOTTPREL, BFD_RELOC_MIPS_TLS_TPREL_HI16 and
BFD_RELOC_MIPS_TLS_TPREL_LO16 relocations if in the microMIPS
mode.
* testsuite/gas/mips/elf-rel28-lldscd-n32.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-micromips-n32.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-n64.d: New test.
* testsuite/gas/mips/elf-rel28-lldscd-micromips-n64.d: New test.
* testsuite/gas/mips/elf-rel28.s: Add instruction selection.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
|
|
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
|
|
Match commit 4ffff32f75b1 ("Match mips_optimize to the -O option
supplied") and adjust `--help' output for `-O0', `-O', `-O1' and `-O2'
options.
gas/
* config/tc-mips.c (md_show_usage): Correct help text for `-O0'
and `-O'. Mention `-O1'. Add `-O2' and its description.
|
|
instruction during lookup.
PR 22014
* config/tc-mips.c (mips_lookup_insn): Use memmove to strip the
instruction size suffix.
|
|
incompatible function types.
PR 22823
bfd Fix compile time warnings generated by gcc version 8.
* libbfd-in.h: Remove extraneous text from prototypes.
Add prototypes for bfd_false_any, bfd_true_any,
bfd_nullvoidptr_any, bfd_0_any, bfd_0u_any, bfd_0l_any,
bfd_n1_any, bfd_void_any.
(_bfd_generic_bfd_copy_private_bfd_data): Use vararg based dummy
function.
(_bfd_generic_bfd_merge_private_bfd_data): Likewise.
(_bfd_generic_bfd_set_private_flags): Likewise.
(_bfd_generic_bfd_copy_private_section_data): Likewise.
(_bfd_generic_bfd_copy_private_symbol_data): Likewise.
(_bfd_generic_bfd_copy_private_header_data): Likewise.
(_bfd_generic_bfd_print_private_bfd_data): Likewise.
(_bfd_noarchive_construct_extended_name_table): Likewise.
(_bfd_noarchive_truncate_arname): Likewise.
(_bfd_noarchive_write_ar_hdr): Likewise.
(_bfd_noarchive_get_elt_at_index): Likewise.
(_bfd_nosymbols_canonicalize_symtab): Likewise.
(_bfd_nosymbols_print_symbol): Likewise.
(_bfd_nosymbols_get_symbol_info): Likewise.
(_bfd_nosymbols_get_symbol_version_string): Likewise.
(_bfd_nosymbols_bfd_is_local_label_name): Likewise.
(_bfd_nosymbols_bfd_is_target_special_symbol): Likewise.
(_bfd_nosymbols_get_lineno): Likewise.
(_bfd_nosymbols_find_nearest_line): Likewise.
(_bfd_nosymbols_find_line): Likewise.
(_bfd_nosymbols_find_inliner_info): Likewise.
(_bfd_nosymbols_bfd_make_debug_symbol): Likewise.
(_bfd_nosymbols_read_minisymbols): Likewise.
(_bfd_nosymbols_minisymbol_to_symbol): Likewise.
(_bfd_norelocs_bfd_reloc_type_lookup): Likewise.
(_bfd_norelocs_bfd_reloc_name_lookup): Likewise.
(_bfd_nowrite_set_arch_mach): Likewise.
(_bfd_nowrite_set_section_contents): Likewise.
(_bfd_nolink_sizeof_headers): Likewise.
(_bfd_nolink_bfd_get_relocated_section_contents): Likewise.
(_bfd_nolink_bfd_relax_section): Likewise.
(_bfd_nolink_bfd_gc_sections): Likewise.
(_bfd_nolink_bfd_lookup_section_flags): Likewise.
(_bfd_nolink_bfd_merge_sections): Likewise.
(_bfd_nolink_bfd_is_group_section): Likewise.
(_bfd_nolink_bfd_discard_group): Likewise.
(_bfd_nolink_bfd_link_hash_table_create): Likewise.
(_bfd_nolink_bfd_link_add_symbols): Likewise.
(_bfd_nolink_bfd_link_just_syms): Likewise.
(_bfd_nolink_bfd_copy_link_hash_symbol_type): Likewise.
(_bfd_nolink_bfd_final_link): Likewise.
(_bfd_nolink_bfd_link_split_section): Likewise.
(_bfd_nolink_section_already_linked): Likewise.
(_bfd_nolink_bfd_define_common_symbol): Likewise.
(_bfd_nolink_bfd_define_start_stop): Likewise.
(_bfd_nodynamic_canonicalize_dynamic_symtab): Likewise.
(_bfd_nodynamic_get_synthetic_symtab): Likewise.
(_bfd_nodynamic_get_dynamic_reloc_upper_bound _bfd_): Likewise.
(_bfd_nodynamic_canonicalize_dynamic_reloc): Likewise.
* libbfd.c (bfd_false_any): New function. Like bfd_false but
accepts one or more arguments.
(bfd_true_any): Likewise.
(bfd_nullvoidptr_any): Likewise.
(bfd_0_any): Likewise.
(bfd_0u_any): Likewise.
(bfd_0l_any): Likewise.
(_bfd_n1_any): Likewise.
(bfd_void_any): Likewise.
* libbfd.h (extern): Regenerate
* aout-target.h (MY_bfd_is_target_special_symbol): Use vararg
based dummy function.
* aout-tic30.c (tic30_aout_set_arch_mach): Likewise.
* binary.c (binary_get_symbol_info): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Likewise.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coffcode.h (coff_set_alignment_hook): Likewise.
(symname_in_debug_hook): Likewise.
(bfd_coff_backend_data bigobj_swap_table): Likewise.
* elf-m10300.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-cr16.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-lm32.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-m32r.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-metag.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-score.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-score7.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-xstormy16.c (elf_backend_omit_section_dynsym): Likewise.
* elf32-xtensa.c (elf_backend_omit_section_dynsym): Likewise.
* elf64-alpha.c (elf_backend_omit_section_dynsym): Likewise.
* elf64-hppa.c (elf_backend_omit_section_dynsym): Likewise.
* elf64-ia64-vms.c (elf_backend_omit_section_dynsym): Likewise.
* elf64-mmix.c (elf_backend_omit_section_dynsym): Likewise.
* elf64-sh64.c (elf_backend_omit_section_dynsym): Likewise.
* elfnn-ia64.c (elf_backend_omit_section_dynsym): Likewise.
* elfxx-target.h (bfd_elfNN_bfd_debug_info_accumulate): Likewise.
(bfd_elfNN_bfd_make_debug_symbol): Likewise.
(bfd_elfNN_bfd_merge_private_bfd_data): Likewise.
(bfd_elfNN_bfd_set_private_flags): Likewise.
(bfd_elfNN_bfd_is_target_special_symbol): Likewise.
(elf_backend_init_index_section): Likewise.
(elf_backend_allow_non_load_phdr): Likewise.
* elfxx-x86.h (elf_backend_omit_section_dynsym): Likewise.
* i386msdos.c (msdos_bfd_is_target_special_symbol): Likewise.
* ieee.c (ieee_construct_extended_name_table): Likewise.
(ieee_write_armap): Likewise.
(ieee_write_ar_hdr): Likewise.
(ieee_bfd_is_target_special_symbol): Likewise.
* ihex.c (ihex_canonicalize_symtab): Likewise.
(ihex_bfd_is_target_special_symbol): Likewise.
* libaout.h (aout_32_bfd_is_target_special_symbol): Likewise.
* libecoff.h (_bfd_ecoff_bfd_is_target_special_symbol): Likewise.
(_bfd_ecoff_set_alignment_hook): Likewise.
* mach-o-target.c (bfd_mach_o_bfd_is_target_special_symbol): Likewise.
* mmo.c (mmo_bfd_is_target_special_symbol): Likewise.
* nlm-target.h (nlm_bfd_is_target_special_symbol): Likewise.
* oasys.c (oasys_construct_extended_name_table): Likewise.
(oasys_write_armap): Likewise.
(oasys_write_ar_hdr): Likewise.
(oasys_bfd_is_target_special_symbol): Likewise.
* pef.c (bfd_pef_bfd_is_target_special_symbol): Likewise.
* plugin.c (bfd_plugin_bfd_is_target_special_symbol): Likewise.
* ppcboot.c (ppcboot_bfd_is_target_special_symbol): Likewise.
* som.c (som_bfd_is_target_special_symbol): Likewise.
* srec.c (srec_bfd_is_target_special_symbol): Likewise.
* tekhex.c (tekhex_bfd_is_target_special_symbol): Likewise.
* verilog.c (verilog_bfd_is_target_special_symbol): Likewise.
* versados.c (versados_bfd_is_target_special_symbol): Likewise.
(versados_bfd_reloc_name_lookup): Likewise.
* vms-alpha.c (vms_bfd_is_target_special_symbol): Likewise.
(vms_bfd_define_start_stop): Likewise.
(alpha_vms_bfd_is_target_special_symbol): Likewise.
* wasm-module.c (wasm_bfd_is_target_special_symbol): Likewise.
* xsym.c (bfd_sym_bfd_is_target_special_symbol): Likewise.
* elf32-arc.c (get_replace_function): Assign replacement function
to func pointer.
* elf32-i370.c (i370_noop): Update prototype.
gas * config/obj-elf.c (elf_pseudo_table): Remove now redundant
casts.
(obj_elf_vtable_inherit): Rename to obj_elf_get_vtable_inherit.
(obj_elf_vtable_inherit): New stub function that calls
obj_elf_get_vtable_inherit.
(obj_elf_vtable_entry): Rename to obj_elf_get_vtable_entry.
(obj_elf_vtable_entry): New stub function that calls
obj_elf_get_vtable_entry.
* config/obj-elf.h (obj_elf_vtable_inherit): Update prototype.
(obj_elf_vtable_entry) Likewise.
(obj_elf_get_vtable_inherit) Likewise.
(obj_elf_get_vtable_entry) Likewise.
* config/tc-arm.c (md_pseudo_table): Remove now redundant cast.
* config/tc-i386c (md_pseudo_table): Likewise.
* config/tc-hppa.c (pa_vtable_entry): Call
obj_elf_get_vtable_entry.
(pa_vtable_inherit): Call obj_elf_get_vtable_inherit.
* config/tc-mips.c (s_mips_file): Replace call to dwarf2_get_file
with call to dwarf2_get_filename.
* dwarf2dbg.c (dwarf2_directive_file): Rename to
dwarf2_directive_filename.
(dwarf2_directive_file): New stub function that calls
dwarf2_directive_filename.
* dwarf2dbg.h: Prototype dwarf2_directive_filename.
opcodes * metag-dis.c (print_fmmov): Double buffer size to avoid warning
about truncation of printing.
|
|
Complement commit 23fce1e31156 ("MIPS16 intermix test failure"),
<https://sourceware.org/ml/binutils/2009-01/msg00335.html>, and
remove a stale option marker entry.
gas/
* config/tc-mips.c (options): Remove OPTION_COMPAT_ARCH_BASE
enum value.
|
|
Remove an issue with `as --help' always reporting `o32' as the default
ABI regardless of what the default actually is, originally caused by
commit cac012d6d394 ("check mips abi x linker emulation compatibility"),
<https://sourceware.org/ml/binutils/2003-05/msg00187.html> missing an
update here.
gas/
* config/tc-mips.c (md_show_usage): Correctly indicate the
configuration-specific default ABI.
|
|
Correct a commit 25499ac7ee92 ("MIPS16e2: Add MIPS16e2 ASE support") GAS
bug and add missing help text for the `-mmips16e2' and `-mno-mips16e2'
options added with said commit.
gas/
* config/tc-mips.c (md_show_usage): Report `-mmips16e2' and
`-mno-mips16e2' options.
|
|
|
|
Fix a bug in MIPS n32 ELF object file generation and make such objects
consistent with the n32 BFD requested, by presetting the EF_MIPS_ABI2
flag in the `e_flags' member of the newly created ELF file header, as it
is this flag that tells n32 objects apart from o32 objects.
This flag will then stay set through to output file generation for
writers such as GAS or GDB's `generate-core-file' command. Readers will
overwrite the whole of `e_flags' along with the rest of the ELF file
header in `elf_swap_ehdr_in' and then verify in `mips_elf_n32_object_p'
that the flag is still set before accepting an input file as an n32
object.
The issue was discovered with GDB's `generate-core-file' command making
o32 core files out of n32 debuggees.
bfd/
* elfn32-mips.c (mips_elf_n32_mkobject): New prototype and
function.
(bfd_elf32_mkobject): Use `mips_elf_n32_mkobject' rather than
`_bfd_mips_elf_mkobject'.
gas/
* config/tc-mips.c (mips_elf_final_processing): Don't set
EF_MIPS_ABI2 in `e_flags'.
|
|
If a .stabs directive was used before another .set directive in a MIPS
source file, s_mips_stab would call mips_mark_labels without having
initialized the mips_opts structure yet. Fix this by calling
file_mips_check_options which will initialize mips_opts if necessary.
gas/
PR gas/21762
* config/tc-mips.c (s_mips_stab): Insert call to
file_mips_check_options.
* testsuite/gas/mips/micromips@stabs-symbol-type.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/mips16@stabs-symbol-type.d: New test.
* testsuite/gas/mips/stabs-symbol-type.d: New test.
* testsuite/gas/mips/stabs-symbol-type.s: New test source.
|
