aboutsummaryrefslogtreecommitdiff
path: root/gas/config/obj-coff.h
AgeCommit message (Collapse)AuthorFilesLines
2024-10-04gas: hide emulation struct format_ops instances when not neededJan Beulich1-5/+2
Most targets don't even support emulations, so this data (and certain functions) are entirely dead code for them.
2024-10-04include: de-duplicate i386.h and x86_64.hJan Beulich1-6/+1
Move common definitions to a new x86.h, thus allowing gas'es obj-coff.h to include just that, getting rid of a TE_PEP compile-time dependency.
2024-10-04gas: don't use COFF-specific SF_SET_LOCAL() directly from read.cJan Beulich1-0/+2
Make this a proper obj-format hook instead.
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-08-31gas init_stab_section and get_stab_string_offsetAlan Modra1-2/+2
get_stab_string_offset currently creates the stabstr section if not already present, in the process keeping a reference to the malloc'd section name string. Really, the name belongs in bfd_alloc'd memory or some obstack so that it doesn't show as a memory leak on exit. s_stab_generic at least does allocate the name for the stab section on an obstack, but doesn't tidy that as well as it could. Return paths after issuing a warning don't release the memory, nor the memory for the "string" copy. This patch fixes these problems. s_stab_generic is rearranged so that creation of the sections occurs earlier, before any potential uses of the note obstack during expression parsing. That makes it possible to always free the section name strings unless used to create new sections. I've also avoided get_absolute_expression_and_terminator as I see that function might skip over end-of-line, and lack of a --input_line_pointer might have caused the following source line to be ignored. (Other uses of this function in gas are OK.) * config/obj-coff.c (obj_coff_init_stab_section): Add stabstr param. Pass to get_stab_string_offset rather than name of section. * config/obj-som.c (obj_som_init_stab_section): Likewise. * config/obj-elf.c (obj_elf_init_stab_section): Likewise. (elf_init_stab_section): Adjust. * config/obj-coff.h (INIT_STAB_SECTION): Update. (obj_coff_init_stab_section): Update prototype. * config/obj-som.h: Similarly. * config/obj-elf.h: Similarly. * config/obj-multi.h (INIT_STAB_SECTION): Update. * obj.h (struct format_ops <init_stab_section>): Update. * read.h (get_stab_string_offset): Update prototype. * stabs.c (cached_sec): Delete. (stabs_begin): Adjust to suit. (get_stab_string_offset): Add stabstr param, delete stabstr_name and free_stabstr_secname params. Don't make stabstr section here. (eat_comma): New function. (s_stab_generic): Replace stab_secname_obstack_end param with bool freenames. Move creation of stab and stabstr sections earlier, so the names can be freed earlier before possible use of notes obstack during expression parsing. Tidy error paths ensuring "string" is freed. Use get_absolute_expression in place of get_absolute_expression_and_terminator. (s_stab): Adjust. (s_xstab): Use notes_concat to make stabstr section name.
2023-03-27Use stdint types in coff internal_auxentAlan Modra1-1/+1
long is a poor choice of type to store 32-bit values read from objects files by H_GET_32. H_GET_32 doesn't sign extend so tests like that in gdb/coffread.c for "negative" values won't work if long is larger than 32 bits. If long is 32-bit then code needs to be careful to not accidentally index negative array elements. (I'd rather see a segfault on an unmapped 4G array index than silently reading bogus data.) long is also a poor choice for x_sect.s_scnlen, which might have 64-bit values. It's better to use unsigned exact width types to avoid surprises. I decided to change the field names too, which makes most of this patch simply renaming. Besides that there are a few places where casts are no longer needed, and where printf format strings or tests need adjusting. include/ * coff/internal.h (union internal_auxent): Use unsigned stdint types. Rename l fields to u32 and u64 as appropriate. bfd/ * coff-bfd.c, * coff-rs6000.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * peXXigen.c, * xcofflink.c: Adjust to suit internal_auxent changes. binutils/ * rdcoff.c: Adjust to suit internal_auxent changes. gas/ * config/obj-coff.h, * config/tc-ppc.c: Adjust to suit internal_auxent changes. gdb/ * coffread.c, * xcoffread.c: Adjust to suit internal_auxent changes. ld/ * pe-dll.c: Adjust to suit internal_auxent changes.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-0/+4
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-04-21Delete unused COFF gas macroAlan Modra1-6/+3
* config/obj-coff.h (sy_obj): Don't define. (OBJ_SYMFIELD_TYPE): Revise comments.
2022-04-12gas: drop .appfile and .applineJan Beulich1-5/+2
These were used originally to represent "# <line> <file>" constructs inserted by (typically) compilers when pre-processing. Quite some time ago they were replaced by .linefile though. Since the original directives were never documented, we ought to be able to remove support for them. As a result in a number of case function parameter aren't used anymore and can hence be dropped.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-05-07Fix .dwsect generation for XCOFF. Handle .function generated with DWARF on ↵Cl?ment Chigot1-0/+18
XCOFF. gas * config/tc-ppc.c (ppc_function): Update comment for fifth argument. (ppc_frob_symbol): Remove ppc_last_function check. Make sure coff_last_function is reset. Correctly set fsize when not provided in .function. * testsuite/gas/ppc/aix.exp: New tests. * testsuite/gas/ppc/xcoff-function-1-32.d: New test. * testsuite/gas/ppc/xcoff-function-1-64.d: New test. * testsuite/gas/ppc/xcoff-function-1.s: New test. bfd * coff-rs6000.c (xcoff_dwsect_names): Add new DWARF sections. * coffgen.c (coff_pointerize_aux): Handle C_DWARF. (coff_print_symbol): Likewise. * libxcoff.h (XCOFF_DWSECT_NBR_NAMES): Update. gas * config/obj-coff.c (coff_frob_symbol): Don't skip C_DWARF. (coff_adjust_section_syms): Use corrext auxent for C_DWARF. (coff_frob_section): Likewise. * config/obj-coff.h (SA_GET_SECT_SCNLEN, SA_GET_SECT_NRELOC, SA_SET_SECT_SCNLEN, SA_SET_SECT_NRELOC) New defines. (SET_SECTION_RELOCS): Adjust for C_DWARF. * config/tc-ppc.c (ppc_frob_symbol): Don't skip C_DWARF. (ppc_adjust_symtab): Reorder C_DWARF symbols. * testsuite/gas/ppc/aix.exp: New tests. * testsuite/gas/ppc/xcoff-dwsect-2-32.d: New test. * testsuite/gas/ppc/xcoff-dwsect-2-64.d: New test. * testsuite/gas/ppc/xcoff-dwsect-2.s: New test. include * coff/internal.h (C_DWARF): New define. * coff/xcoff.h (SSUBTYP_DWLOC, SSUBTYP_DWFRAME, SSUBTYP_DWMAC): New defines.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-08-21gas symbol struct field renamingAlan Modra1-1/+1
Get rid of sy_ prefix, and some unused fields. * symbols.c (struct symbol_flags): Rename sy_volatile to volatil, and remove sy_ from other field names. Update throughout. (struct symbol): Remove sy_ from field names. Delete unused TARGET_SYMBOL_FIELDS. Update throughout file. Move after.. (struct local_symbol): ..here. Remove lsy_ from field names. Delete unused TC_LOCAL_SYMFIELD_TYPE. Update throughout file. (local_symbol_resolved_p, local_symbol_mark_resolved): Delete. Expand uses throughout file. (local_symbol_get_frag, local_symbol_set_frag): Likewise. (symbol_new): Move symbol_table_frozen test to.. (symbol_append): ..here, and.. (symbol_insert): ..here. (resolve_symbol_value, symbol_relc_make_expr): White space fixes. (HANDLE_XADD_OPT1, HANDLE_XADD_OPT2): Likewise. * config/obj-coff.h (RESOLVE_SYMBOL_REDEFINITION): Update.
2020-07-09Remove powerpc PE supportAlan Modra1-4/+0
Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2020-03-03Tidy obj-coff.hAlan Modra1-14/+0
* config/obj-coff.h: Remove vestiges of coff-m68k and pe-mips support.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-04-16Remove sparc-aout and sparc-coff supportAlan Modra1-4/+0
bfd/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-sparcle.c: Delete. * aoutf1.h: Delete. * cf-sparclynx.c: Delete. * coff-sparc.c: Delete. * demo64.c: Delete. * sparclinux.c: Delete. * sparclynx.c: Delete. * sparcnetbsd.c: Delete. * sunos.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove sparc-aout and sparc-coff support. gas/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config/obj-coff.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-sparc.h: Likewise. * configure.tgt: Likewise. * config/te-sparcaout.h: Delete. * testsuite/gas/sun4/addend.d: Delete. * testsuite/gas/sun4/addend.exp: Delete. * testsuite/gas/sun4/addend.s: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sparc-aout and sparc-coff support. * configure.tgt: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * emulparams/coff_sparc.sh: Delete. * emulparams/sparcaout.sh: Delete. * emulparams/sparclinux.sh: Delete. * emulparams/sparcnbsd.sh: Delete. * emulparams/sun4.sh: Delete. * scripttempl/sparccoff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra1-5/+0
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8300-coff supportAlan Modra1-5/+0
include/ * coff/h8300.h: Delete. bfd/ * Makefile.am: Remove h8300-coff support. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * reloc16.c: Likewise. * targets.c: Likewise. * coff-h8300.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8300-coff support. gas/ * config/obj-coff.h: Remove h8300-coff support. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * testsuite/gas/h8300/h8300.exp: Likewise. * testsuite/gas/h8300/branch-coff.s: Delete. * testsuite/gas/h8300/branchh-coff.s: Delete. * testsuite/gas/h8300/branchs-coff.s: Delete. * testsuite/gas/h8300/ffxx1-coff.d: Delete. * testsuite/gas/h8300/ffxx1-coff.s: Delete. * testsuite/gas/h8300/h8300-coff.exp: Delete. ld/ * Makefile.am: Remove h8300-coff support. * configure.tgt: Likewise. * testsuite/ld-h8300/h8300.exp: Likewise. * emulparams/h8300.sh: Delete. * emulparams/h8300h.sh: Delete. * emulparams/h8300hn.sh: Delete. * emulparams/h8300s.sh: Delete. * emulparams/h8300sn.sh: Delete. * emulparams/h8300sx.sh: Delete. * emulparams/h8300sxn.sh: Delete. * scripttempl/h8300.sc: Delete. * scripttempl/h8300h.sc: Delete. * scripttempl/h8300hn.sc: Delete. * scripttempl/h8300s.sc: Delete. * scripttempl/h8300sn.sc: Delete. * scripttempl/h8300sx.sc: Delete. * scripttempl/h8300sxn.sc: Delete. * testsuite/ld-h8300/relax-3-coff.d: Delete. * testsuite/ld-h8300/relax-4-coff.d: Delete. * testsuite/ld-h8300/relax-5-coff.d: Delete. * testsuite/ld-h8300/relax-6-coff.d: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-37/+1
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-08-12Remove trailing spaces in gasH.J. Lu1-4/+4
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-5/+0
with support for the new or1k configuration.
2014-03-05Update copyright yearsAlan Modra1-3/+1
2012-01-122012-01-12 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-1/+1
PR gas/13591 * config/obj-coff.h (sy_obj): Rename macro to avoid a name conflict.
2010-06-29remove maxq-coff portAlan Modra1-5/+0
2009-09-09 * config/obj-coff.h (USE_UNIQUE): Don't define.Alan Modra1-3/+0
* config/obj-coff.c (weak_uniquify): Use an_external_name when TE_PE. * symbols.c (an_external_name): Define when TE_PE. (S_SET_EXTERNAL): Assign an_external_name when TE_PE. * tc.h (an_external_name): Declare when TE_PE.
2009-09-02update copyright datesAlan Modra1-1/+1
2009-08-172009-08-17 Kai Tietz <kai.tietz@onevision.com>Kai Tietz1-0/+7
* config/obj-coff-seh.c: New file. * config/obj-coff-seh.h: Likewise. * config/obj-coff.c (obj-coff-seh.c): Add include. (coff_pseudo_table): Add new .seh... commands. * config/obj-coff.h (obj_coff_seh_do_final): Add new function prototype. (obj_coff_generate_pdata): New obj-coff hook. * gas/write.c (size_seg): Avoid sizing of already sized sections. (write_object_file): Call conditional hook objc_coff_generate_pdata. * Makefile.am: Add dependencies for new files. * Makefile.in: Regenerated.
2009-05-202009-05-20 Kai Tietz <kai.tietz@onevision.com>H.J. Lu1-11/+1
H.J. Lu <hongjiu.lu@intel.com> * config/obj-coff.h: Include "coff/x86_64.h" for x86 pe-coff. (TARGET_FORMAT): Removed for x86 pe-coff. (COFF_TARGET_FORMAT): Likewise. * config/tc-i386.c (md_longopts): Allow --64 for x86 pe-coff. (md_parse_option): Likewise. (md_show_usage): Show option --32/--64 for x86 pe-coff. (i386_target_format): Use also for x86 pe-coff. * config/tc-i386.h (TARGET_FORMAT): Defined as i386_target_format for x86 pe-coff.
2007-07-04gas/H.J. Lu1-2/+2
2007-07-04 H.J. Lu <hongjiu.lu@intel.com> * config/obj-coff.h (x86_64_target_format): Renamed to ... (i386_target_format): This (TARGET_FORMAT): Use i386_target_format. * config/tc-i386.c (x86_64_target_format): Removed. (i386_target_format): Handle PE formats. gas/testsuite/ 2007-07-04 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/i386.exp: Run x86-64-nops-1 for x86_64-*-mingw*.
2007-07-03Switch to GPLv3Nick Clifton1-2/+2
2006-09-20Add x86_64-mingw64 targetNick Clifton1-0/+14
2006-06-07remove some duplicate #include's.Alan Modra1-3/+1
2005-10-27gas/Jan Beulich1-0/+2
2005-10-27 Jan Beulich <jbeulich@novell.com> * read.c (assign_symbol): Also consider equates already defined. * symbols.c (symbol_clone): Also clone the underlying BFD symbol. * config/obj-coff.h (obj_symbol_clone_hook): New. (coff_obj_symbol_clone_hook): Declare. * config/obj-coff.c (coff_obj_symbol_clone_hook): New. gas/testsuite/ 2005-10-27 Jan Beulich <jbeulich@novell.com> * gas/all/gas.exp: Don't xfail equiv1 test anymore.
2005-10-25Add support for the Z80 processor familyNick Clifton1-0/+5
2005-10-24gas/ChangeLog:Alexandre Oliva1-0/+7
* read.c (potable): Add weakref. (s_weakref): New. * read.h (s_weakref): Declare. * struc-symbol.h (struct symbol): Add sy_weakrefr and sy_weakrefd. * symbols.c (colon): Clear weakrefr. (symbol_find_exact): Rename to, and reimplement in terms of... (symbol_find_exact_noref): ... new function. (symbol_find): Likewise... (symbol_find_noref): ... ditto. (resolve_symbol_value): Resolve weakrefr without setting their values. (S_SET_WEAK): Call hook. (S_GET_VALUE): Follow weakref link. (S_SET_VALUE): Clear weakrefr. (S_IS_WEAK): Follow weakref link. (S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): New. (S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): New. (symbol_set_value_expression, symbol_set_frag): Clear weakrefr. (symbol_mark_used): Follow weakref link. (print_symbol_value_1): Print weak, weakrefr and weakrefd. * symbols.h (symbol_find_noref, symbol_find_exact_noref): Declare. (S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): Declare. (S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): Declare. * write.c (adust_reloc_syms): Follow weakref link. Do not complain if target is undefined. (write_object_file): Likewise. Remove weakrefr symbols. Drop unreferenced weakrefd symbols. * config/obj-coff.c (obj_frob_symbol): Do not force WEAKREFD symbols EXTERNAL. (pecoff_obj_set_weak_hook, pecoff_obj_clear_weak_hook): New. * config/obj-coff.h (obj_set_weak_hook, obj_clear_weak_hook): Define. * doc/as.texinfo: Document weakref. * doc/internals.texi: Document new struct members, internal functions and hooks. gas/testsuite/ChangeLog: * gas/all/weakref1.s, gas/all/weakref1.d: New test. * gas/all/weakref1g.d, gas/all/weakref1l.d: New tests. * gas/all/weakref1u.d, gas/all/weakref1w.d: New tests. * gas/all/weakref2.s, gas/all/weakref3.s: New tests. * gas/all/gas.exp: Run new tests.
2005-08-11 * README-vms: Delete.Alan Modra1-494/+0
* config-gas.com: Delete. * makefile.vms: Delete. * vmsconf.sh: Delete. * config/atof-tahoe.c: Delete. * config/m88k-opcode.h: Delete. * config/obj-bout.c: Delete. * config/obj-bout.h: Delete. * config/obj-hp300.c: Delete. * config/obj-hp300.h: Delete. * config/tc-a29k.c: Delete. * config/tc-a29k.h: Delete. * config/tc-h8500.c: Delete. * config/tc-h8500.h: Delete. * config/tc-m88k.c: Delete. * config/tc-m88k.h: Delete. * config/tc-tahoe.c: Delete. * config/tc-tahoe.h: Delete. * config/tc-tic80.c: Delete. * config/tc-tic80.h: Delete. * config/tc-w65.c: Delete. * config/tc-w65.h: Delete. * config/te-aux.h: Delete. * config/te-delt88.h: Delete. * config/te-delta.h: Delete. * config/te-dpx2.h: Delete. * config/te-hp300.h: Delete. * config/te-ic960.h: Delete. * config/vms-a-conf.h: Delete. * doc/c-a29k.texi: Delete. * doc/c-h8500.texi: Delete. * doc/c-m88k.texi: Delete. * README: Remove obsolete examples, and list of supported targets. * Makefile.am: Remove a29k, h8500, m88k, tahoe, tic80, w65, bout and hp300 support. (DEP_FLAGS): Don't define BFD_ASSEMBLER. * configure.in: Remove --enable-bfd-assembler, need_bfd, primary_bfd_gas. * configure.tgt: Remove a29k, h8300-coff, h8500-*, i960 non-elf, m68k non bfd, m88k, or32-coff, tic80-*, vax non-bfd, w65k-*, *-nindy. * as.c: Remove all non-BFD_ASSEMBLER code, support for above targets. * as.h: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbg.c: Likewise. * ehopt.c: Likewise. * input-file.c: Likewise. * listing.c: Likewise. * literal.c: Likewise. * messages.c: Likewise. * obj.h: Likewise. * output-file.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. * struc-symbol.h: Likewise. * subsegs.c: Likewise. * subsegs.h: Likewise. * symbols.c: Likewise. * symbols.h: Likewise. * tc.h: Likewise. * write.c: Likewise. * write.h: Likewise. * config/aout_gnu.h: Likewise. * config/obj-aout.c: Likewise. * config/obj-aout.h: Likewise. * config/obj-coff.c: Likewise. * config/obj-coff.h: Likewise. * config/obj-evax.h: Likewise. * config/obj-ieee.h: Likewise. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * config/tc-avr.c: Likewise. * config/tc-avr.h: Likewise. * config/tc-crx.h: Likewise. * config/tc-d10v.h: Likewise. * config/tc-d30v.h: Likewise. * config/tc-dlx.h: Likewise. * config/tc-fr30.h: Likewise. * config/tc-frv.h: Likewise. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * config/tc-hppa.h: Likewise. * config/tc-i370.h: Likewise. * config/tc-i386.c: Likewise. * config/tc-i386.h: Likewise. * config/tc-i860.h: Likewise. * config/tc-i960.c: Likewise. * config/tc-i960.h: Likewise. * config/tc-ip2k.h: Likewise. * config/tc-iq2000.h: Likewise. * config/tc-m32c.h: Likewise. * config/tc-m32r.h: Likewise. * config/tc-m68hc11.h: Likewise. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * config/tc-maxq.c: Likewise. * config/tc-maxq.h: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mcore.h: Likewise. * config/tc-mn10200.h: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-mn10300.h: Likewise. * config/tc-ms1.h: Likewise. * config/tc-msp430.c: Likewise. * config/tc-msp430.h: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-ns32k.h: Likewise. * config/tc-openrisc.h: Likewise. * config/tc-or32.c: Likewise. * config/tc-or32.h: Likewise. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * config/tc-s390.h: Likewise. * config/tc-sh.c: Likewise. * config/tc-sh.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic30.h: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic4x.h: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-tic54x.h: Likewise. * config/tc-v850.h: Likewise. * config/tc-vax.c: Likewise. * config/tc-vax.h: Likewise. * config/tc-xstormy16.h: Likewise. * config/tc-xtensa.h: Likewise. * config/tc-z8k.c: Likewise. * config/tc-z8k.h: Likewise. * config/vms-a-conf.h * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * doc/as.texinfo: Likewise. * doc/Makefile.in: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * config.in: Regenerate. * po/POTFILES.in: Regenerate.
2005-05-05Update the address and phone number of the FSFNick Clifton1-2/+2
2005-04-202005-04-20 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-4/+0
* config/obj-aout.h (S_IS_EXTERN): Removed. * config/obj-bout.h (S_IS_EXTERN): Likewise. * config/obj-coff.h (S_IS_EXTERN): Likewise. * symbols.c (S_IS_EXTERN): Likewise. * symbols.h (S_IS_EXTERN): Likewise. * config/tc-alpha.c (tc_gen_reloc): Replace S_IS_EXTERN with S_IS_EXTERNAL. * config/tc-d10v.c (md_apply_fix3): Likewise. * config/tc-ia64.c (ia64_fix_adjustable): Likewise. * config/tc-iq2000.c (iq2000_fix_adjustable): Likewise. * config/tc-m32r.c (m32r_fix_adjustable): Likewise. * config/tc-mmix.c (mmix_adjust_symtab): Likewise. * config/tc-sh64.c (shmedia_frob_file_before_adjust): Likewise. (shmedia_md_convert_frag): Likewise. * symbols.c (print_symbol_value_1): Likewise. * write.c (write_object_file): Likewise.
2005-04-19gas/Jan Beulich1-5/+0
2005-04-19 Jan Beulich <jbeulich@novell.com> * symbols.h (symbol_find_base): Remove prototype. * symbols.c (save_symbol_name): Remove code section conditional upon STRIP_UNDERSCORE. (symbol_find): Remove. (symbol_find_base): Rename to symbol_find. * subsegs.c (section_symbol): Replace use of symbol_find_base with symbol_find. * config/obj-coff.c (tag_insert): Remove code section conditional upon STRIP_UNDERSCORE. (obj_coff_def): Likewise. (obj_coff_endef): Replace use of symbol_find_base with symbol_find. (coff_frob_symbol): Likewise. (yank_symbols): Likewise. (c_section_symbol): Likewise. * config/obj-coff.h (DO_NOT_STRIP): Remove. * config/tc-arm.c (symbol_locate): Remove code section conditional upon STRIP_UNDERSCORE. * config/tc-h8300.h (DO_NOT_STRIP): Remove. * config/tc-h8500.h (DO_NOT_STRIP): Remove. * config/tc-sh.h (DO_NOT_STRIP): Remove. * config/tc-w65.h (DO_NOT_STRIP): Remove. * config/tc-z8k.h (DO_NOT_STRIP): Remove.
2005-03-16Fix typo introduced by previous deltaNick Clifton1-0/+2
2005-03-16Convert to ISO C90 formattingNick Clifton1-192/+177
2005-03-03update copyright datesAlan Modra1-1/+1
2004-11-19 * config/obj-coff.c (c_dot_file_symbol): Add "app" param.Alan Modra1-4/+4
(coff_adjust_symtab): Adjust call. (crawl_symbols): Likewise. * config/obj-coff.h (c_dot_file_symbol): Add "app" param. (obj_app_file): Adjust.
generated by cgit v1.1 at 2024-11-20 10:43:28 +0000