aboutsummaryrefslogtreecommitdiff
path: root/gas/config.in
AgeCommit message (Collapse)AuthorFilesLines
2022-10-11add --enable-default-compressed-debug-sections-algorithm configure optionMartin Liska1-0/+3
ChangeLog: * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. gas/ChangeLog: * NEWS: Document the new option. * as.c (flag_compress_debug): Set default algorithm based on the configure option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. ld/ChangeLog: * NEWS: Document the new option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. * ldmain.c: Set default algorithm based on the configure option.
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song1-0/+3
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2021-04-05C99 gas configuryAlan Modra1-98/+0
Also remove alloca stuff since we don't use alloca in gas nowadays. * configure.ac: Don't check for string.h, strings.h, stdlib.h, errno.h, limits.h, locale.h or time.h. Don't check for unlink, remove, sbrk (unused) or setlocale. Adjust gas_test_headers. Don't check for errno, free, malloc, realoc, sbrk, strstr, getenv strstr, or vsnprintf declarations. (AC_ISC_POSIX, AC_FUNC_ALLOCA, AC_C_INLINE): Don't invoke. * as.h: Don't include alloca-conf.h, include config.h instead. Include string.h, stdlib.h, errno.h unconditionally. Remove various fallback declarations. * asintl.h: Don't test HAVE_LOCALE_H. * as.c: Don't test HAVE_SETLOCALE. * dwarf2dbg.c: Include limits.h unconditionally. * expr.c: Likewise. * sb.c: Likewise. * symbols.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-tic54x.c (tic54x_mlib): Call remove rather than unlink. * config.in: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2020-05-20[PATCH v2 0/9] RISC-V: Support version controling for ISA standard ↵Nelson Chu1-0/+9
extensions and CSR 1. Remove the -mriscv-isa-version and --with-riscv-isa-version options. We can still use -march to choose the version for each extensions, so there is no need to add these. 2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...]. Unlike the architecture string has specified by spec, ther is no need to do the same thing for options. 3. Spilt the patches to reduce the burdens of review. [PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions to [PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions [PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default. [PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version. to [PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version. [PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version. 4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c. The behavior is same as comparing the choosen privilege spec. include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean. (enum riscv_isa_spec_class): New enum class. All supported ISA spec belong to one of the class (struct riscv_ext_version): New structure holds version information for the specific ISA. * opcode/riscv-opc.h (DECLARE_CSR): There are two version information, define_version and abort_version. The define_version means which privilege spec is started to define the CSR, and the abort_version means which privilege spec is started to abort the CSR. If the CSR is valid for the newest spec, then the abort_version should be PRIV_SPEC_CLASS_DRAFT. (DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR. * opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define the current supported privilege spec versions. (struct riscv_csr_extra): Add new fields to store more information about the CSR. We use these information to find the suitable CSR address when user choosing a specific privilege spec. binutils * dwarf.c: Updated since DECLARE_CSR is changed. opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store all information about the supported spec and the corresponding ISA versions. Currently, only Zicsr is supported to verify the correctness of Z sub extension settings. Others will be supported in the future patches. (struct isa_spec_t, isa_specs): List for all supported ISA spec classes and the corresponding strings. (riscv_get_isa_spec_class): New function. Get the corresponding ISA spec class by giving a ISA spec string. * riscv-opc.c (struct priv_spec_t): New structure. (struct priv_spec_t priv_specs): List for all supported privilege spec classes and the corresponding strings. (riscv_get_priv_spec_class): New function. Get the corresponding privilege spec class by giving a spec string. (riscv_get_priv_spec_name): New function. Get the corresponding privilege spec string by giving a CSR version class. * riscv-dis.c: Updated since DECLARE_CSR is changed. * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR according to the chosen version. Build a hash table riscv_csr_hash to store the valid CSR for the chosen pirv verison. Dump the direct CSR address rather than it's name if it is invalid. (parse_riscv_dis_option_without_args): New function. Parse the options without arguments. (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to parse the options without arguments first, and then handle the options with arguments. Add the new option -Mpriv-spec, which has argument. * riscv-dis.c (print_riscv_disassembler_options): Add description about the new OBJDUMP option. ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated priv attributes according to the -mpriv-spec option. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise. bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function get_default_version. It is used to find the default version for the specific extension. * elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters default_major_version and default_minor_version. Add new bfd_boolean parameter *use_default_version. Set it to TRUE if we need to call the callback rps->get_default_version to find the default version. (riscv_parse_std_ext): Call rps->get_default_version if we fail to find the default version in riscv_parsing_subset_version, and then call riscv_add_subset to add the subset into subset list. (riscv_parse_prefixed_ext): Likewise. (riscv_std_z_ext_strtab): Support Zicsr extensions. * elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the strings rather than characters. riscv_merge_arch_attr_info): The callback function get_default_version is only needed for assembler, so set it to NULL int the linker. * elfxx-riscv.c (riscv_estimate_digit): Remove the static. * elfxx-riscv.h: Updated. gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated. * config/tc-riscv.c (default_arch_with_ext, default_isa_spec): Static variables which are used to set the ISA extensions. You can use -march (or ELF build attributes) and -misa-spec to set them, respectively. (ext_version_hash): The hash table used to handle the extensions with versions. (init_ext_version_hash): Initialize the ext_version_hash according to riscv_ext_version_table. (riscv_get_default_ext_version): The callback function of riscv_parse_subset_t. According to the choosed ISA spec, get the default version for the specific extension. (riscv_set_arch): Set the callback function. (enum options, struct option md_longopts): Add new option -misa-spec. (md_parse_option): Do not call riscv_set_arch for -march. We will call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class to set default_isa_spec class. (riscv_after_parse_args): Call init_ext_version_hash to initialize the ext_version_hash, and then call riscv_set_arch to set the architecture with versions according to default_arch_with_ext. * testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for x extensions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we already set it's version to 2p1 by march, so no need to use the default 2p2 version. For m-ext, we do not set the version by -march and ELF arch attribute, so set the default 2p0 to it. For zicsr, it is not defined in ISA spec 2p2, so set 0p0 to it. * testsuite/gas/riscv/attribute-10.d: New testcase. The version of zicsr is 2p0 according to ISA spec 20191213. * config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT) (DEFAULT_RISCV_ISA_SPEC): Default configure option settings. You can set them by configure options --with-arch and --with-isa-spec, respectively. (riscv_set_default_isa_spec): New function used to set the default ISA spec. (md_parse_option): Call riscv_set_default_isa_spec rather than call riscv_get_isa_spec_class directly. (riscv_after_parse_args): If the -isa-spec is not set, then we set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by calling riscv_set_default_isa_spec. * testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since the --with-isa-spec may be set to different ISA spec. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * configure.ac: Add configure options, --with-arch and --with-isa-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (default_priv_spec): Static variable which is used to check if the CSR is valid for the chosen privilege spec. You can use -mpriv-spec to set it. (enum reg_class): We now get the CSR address from csr_extra_hash rather than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX. (riscv_init_csr_hashes): Only need to initialize one hash table csr_extra_hash. (riscv_csr_class_check): Change the return type to void. Don't check the ISA dependency if -mcsr-check isn't set. (riscv_csr_version_check): New function. Check and find the CSR address from csr_extra_hash, according to default_priv_spec. Report warning for the invalid CSR if -mcsr-check is set. (reg_csr_lookup_internal): Updated. (reg_lookup_internal): Likewise. (md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed. (enum options, struct option md_longopts): Add new GAS option -mpriv-spec. (md_parse_option): Call riscv_set_default_priv_version to set default_priv_spec. (riscv_after_parse_args): If -mpriv-spec isn't set, then set the default privilege spec to the newest one. (enum riscv_csr_class, struct riscv_csr_extra): Move them to include/opcode/riscv.h. * testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want to check the ISA dependency for CSR, so fix the spec version by adding -mpriv-spec=1.11. * testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some version warnings for the test case. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case. Check whether the CSR is valid when privilege version 1.9 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case. Check whether the CSR is valid when privilege version 1.9.1 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case. Check whether the CSR is valid when privilege version 1.10 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case. Check whether the CSR is valid when privilege version 1.11 is choosed. * gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option setting. You can set it by configure option --with-priv-spec. (riscv_set_default_priv_spec): New function used to set the default privilege spec. (md_parse_option): Call riscv_set_default_priv_spec rather than call riscv_get_priv_spec_class directly. (riscv_after_parse_args): If -mpriv-spec isn't set, then we set the default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by calling riscv_set_default_priv_spec. * testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since the --with-priv-spec may be set to different privilege spec. * testsuite/gas/riscv/priv-reg.d: Likewise. * configure.ac: Add configure option --with-priv-spec. * configure: Regenerated. * config.in: Regenerated. * config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to explicit_attr. Set it to TRUE if any ELF attribute is found. (riscv_set_default_priv_spec): Try to set the default_priv_spec if the priv attributes are set. (md_assemble): Set the default_priv_spec according to the priv attributes when we start to assemble instruction. (riscv_write_out_attrs): Rename riscv_write_out_arch_attr to riscv_write_out_attrs. Update the arch and priv attributes. If we don't set the corresponding ELF attributes, then try to output the default ones. (riscv_set_public_attributes): If any ELF attribute or -march-attr options is set (explicit_attr is TRUE), then call riscv_write_out_attrs to update the arch and priv attributes. (s_riscv_attribute): Make sure all arch and priv attributes are set before any instruction. * testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any ELF attribute or -march-attr is set. If the priv attributes are not set, then try to update them by the default setting (-mpriv-spec or --with-priv-spec). * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-09.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec set by priv attributes must be supported. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated priv attributes according to the -mpriv-spec option. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg.d: Removed. * testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the CSR according to the priv spec 1.9. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the CSR according to the priv spec 1.9.1. * testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the CSR according to the priv spec 1.10. * testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the CSR according to the priv spec 1.11. * config/tc-riscv.c (md_show_usage): Add descriptions about the new GAS options. * doc/c-riscv.texi: Likewise.
2019-02-19Fix a potential deadlock in some older Loongson 3A1000 MIPS processors.Paul Hua1-0/+3
* NEWS: Mention -m[no-]fix-loongson3-llsc. * configure.ac: Add --enable-mips-fix-loongson3-llsc. Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC. * config.in: Regenerated. * configure: Likewise. * config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc): New variables. (options): New OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_longopts): Add -m[no-]fix-loongson3-llsc. (md_begin): Initialize sync insn. (fix_loongson3_llsc): New. (append_insn): Call fix_loongson3_llsc. (md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_show_usage): Display -m[no-]fix-loongson3-llsc. * doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc, --enable-mips-fix-loongson3-llsc=[yes|no].
2019-01-19Change version to 2.32.51 and regenerate configure and pot files.Nick Clifton1-2/+1
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson1-0/+4
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
2018-09-20Andes Technology has good news for you, we plan to update the nds32 port of ↵Nick Clifton1-0/+9
binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-08-31x86: Extend assembler to generate GNU property notesH.J. Lu1-0/+4
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED properties. If the assembly input contains no instructions, set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED property. Add a --enable-x86-used-note configure time option to set the default behavior. Set the default if the configure option is not used to "no". * NEWS: Mention -mx86-used-note=[no|yes]. * configure.ac: Add --enable-x86-used-note. Define DEFAULT_X86_USED_NOTE. * config.in: Regenerated. * configure: Likewise. * config/tc-i386.c (x86_isa_1_used): New. (x86_feature_2_used): Likewise. (x86_used_note): Likewise. (_i386_insn): Add has_regmmx, has_regxmm, has_regymm and has_regzmm. (build_modrm_byte): Set i.has_regmmx, i.has_regzmm. i.has_regymm and i.has_regxmm. (x86_cleanup): New function. (output_insn): Update x86_isa_1_used and x86_feature_2_used. (OPTION_X86_USED_NOTE): New. (md_longopts): Add -mx86-used-note=. (md_parse_option): Handle OPTION_X86_USED_NOTE. (md_show_usage): Display -mx86-used-note=. * config/tc-i386.h (x86_cleanup): New prototype. (md_cleanup): New. * doc/c-i386.texi: Document -mx86-used-note=.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-0/+8
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-0/+4
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-04-18various i386-aout and i386-coff target removalAlan Modra1-3/+0
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra1-3/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh-symbianelf supportAlan Modra1-3/+0
bfd/ * Makefile.am: Remove sh-symbianelf support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * elf32-sh-symbian.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-sh.c: Remove sh-symbianelf support. * config/tc-sh.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/sh/reg-prefix.d: Likewise. * testsuite/gas/sh/sh2a-pic.d: Likewise. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove sh-symbianelf support. * configure.tgt: Likewise. * emulparams/shlsymbian.sh: Delete. * scripttempl/elf32sh-symbian.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m88k supportAlan Modra1-3/+0
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-3/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2017-01-18Catch gas exit-via-signalNathan Sidwell1-0/+3
gas/ * as.h (gas_assert): Use abort. (as_assert): Remove. (signal_init): Declare. * as.c (main): Call signal_init. * messages.c: #include <signal.h> (as_assert): Delete. (as_abort): Allow NULL FILE. (signal_crash): New. (signal_init): Register fatal signal handlers. * configure.ac: Check for strsignal. * config.in: Rebuilt. * configure: Rebuilt.
2016-06-30Allow ARC target to be configured with --with-cpu=<cpu-name>.Andrew Burgess1-0/+3
gas * config.in (TARGET_WITH_CPU): Undefine. * configure.ac: Add --with-cpu support, and define in config.h. * configure: Regenerate. * config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU. * NEWS: Mention new configure option.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+4
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-03Add -mrelax-relocations= to x86 assemblerH.J. Lu1-0/+3
The x86 relax relocations introduced in binutils 2.26 aren't supported by linker on Solaris older than Solaris 12. To use x86 assembler with older Solaris linker, this patch adds 1. A command line option -mrelax-relocations= to x86 assembler to control whether to generate relax relocations. 2. A configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. It is defaulted to yes, except for x86 Solaris targets older than Solaris 12. gas/ PR gas/19520 * NEWS: Mention new command line option -mrelax-relocations and new configure option --enable-x86-relax-relocations for x86 target. * config.in: Regenerated. * configure.ac: Add --enable-x86-relax-relocations. (ac_default_x86_relax_relocations): New. Default to 1 except for x86 Solaris targets older than Solaris 12. (DEFAULT_GENERATE_X86_RELAX_RELOCATIONS): Define. * configure: Likewise. * config/tc-i386.c (generate_relax_relocations): New. (OPTION_MRELAX_RELOCATIONS): Likewise. (output_disp): Don't generate relax relocations if generate_relax_relocations is 0. (md_longopts): Add -mrelax-relocations. (md_show_usage): Likewise. (md_parse_option): Handle OPTION_MRELAX_RELOCATIONS. * doc/c-i386.texi: Document -mrelax-relocations=. * testsuite/gas/i386/got-no-relax.d: New file. * testsuite/gas/i386/x86-64-gotpcrel-no-relax.d: Likewise. * testsuite/gas/i386/got.d: Pass -mrelax-relocations=yes to as. * testsuite/gas/i386/localpic.d: Likewise. * testsuite/gas/i386/mixed-mode-reloc32.d: Likewise. * testsuite/gas/i386/reloc32.d: Likewise. * testsuite/gas/i386/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/x86-64-localpic.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-gotpcrel.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise. * testsuite/gas/i386/i386.exp: Run got-no-relax and x86-64-gotpcrel-no-relax. ld/ PR gas/19520 * testsuite/ld-i386/branch1.d: Pass -mrelax-relocations=yes to as. * testsuite/ld-i386/call1.d: Likewise. * testsuite/ld-i386/call2.d: Likewise. * testsuite/ld-i386/call3a.d: Likewise. * testsuite/ld-i386/call3b.d: Likewise. * testsuite/ld-i386/call3c.d: Likewise. * testsuite/ld-i386/call3d.d: Likewise. * testsuite/ld-i386/call3e.d: Likewise. * testsuite/ld-i386/call3f.d: Likewise. * testsuite/ld-i386/call3g.d: Likewise. * testsuite/ld-i386/call3h.d: Likewise. * testsuite/ld-i386/jmp1.d: Likewise. * testsuite/ld-i386/jmp2.d: Likewise. * testsuite/ld-i386/lea1c.d: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/load2.d: Likewise. * testsuite/ld-i386/load3.d: Likewise. * testsuite/ld-i386/load4a.d: Likewise. * testsuite/ld-i386/load5a.d: Likewise. * testsuite/ld-i386/mov2b.d: Likewise. * testsuite/ld-i386/mov3.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-x86-64/call1a.d: Likewise. * testsuite/ld-x86-64/call1b.d: Likewise. * testsuite/ld-x86-64/call1c.d: Likewise. * testsuite/ld-x86-64/call1d.d: Likewise. * testsuite/ld-x86-64/call1e.d: Likewise. * testsuite/ld-x86-64/call1f.d: Likewise. * testsuite/ld-x86-64/call1h.d: Likewise. * testsuite/ld-x86-64/call1i.d: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-i386/got1a.S: Load GOT into %ecx and use it. * testsuite/ld-i386/got1.dd: Updated. * testsuite/ld-i386/got1d.S (1): Removed. * testsuite/ld-i386/i386.exp: Add -Wa,-mrelax-relocations=yes. * testsuite/ld-x86-64/x86-64.exp: Likewise.
2015-10-19Add a gas configure option to select the default behaviour for the ↵Nick Clifton1-0/+3
generation of debug sections - compressed or uncompressed. PR gas/19109 * configure.ac: Add option --enable-compressed-debug-sections. This sets the default behaviour for compressing debug sections. * as.c (flag_compress_debug): Define and initialise to COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set. (show_usage): Indicate whether --no-compress-debug-sections or --compress-debug-sections is the default. * config/tc-i386.c (flag_compress_debug): Delete definition. * doc/as.texinfo (--nocompress-debug-sectionas): Update description. * NEWS: Announce the new feature. * config.in: Regenerate. * configure: Regenerate.
2015-08-26Add asprintf to the list of functions whose decls are checked at configure time.Nick Clifton1-0/+4
PR gas/18842 * configure.ac (AS_CHECK_DECLS): Add asprintf. * configure: Regenerate. * config.in: Regenerate.
2015-03-31Add --with-system-zlib in gasH.J. Lu1-3/+0
This patch adds --with-system-zlib and remove --with-zlib in gas. gas/ * Makefile.am (ZLIBINC): New. (AM_CFLAGS): Add $(ZLIBINC). * as.c: (show_usage): Don't check HAVE_ZLIB_H. (parse_args): Likewise. * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>. (compress_init): Don't check HAVE_ZLIB_H. (compress_data): Likewise. (compress_finish): Likewise. * configure.ac (AM_ZLIB): Removed. (zlibinc): New. AC_SUBST. Add --with-system-zlib. * Makefile.in: Regenerated. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. gas/testsuite/ * gas/i386/dw2-compress-1.d: Expect .zdebug_info.
2014-08-14configury changes to make ld plugin support controlled by --enable-pluginsAlan Modra1-0/+3
This also makes --enable-plugins default to on for hosts that can support plugins, so we have consistent lto toolchain support. The ACX_LARGEFILE moves aren't strictly necessary, but are harmless and will be necessary if plugin support is extended to more hosts via libtool's dlopen support. I started down that path then decided it was more work than I was interested in doing. (ACX_LARGEFILE invokes AC_PLUGINS.) config/ * plugins.m4: Test for dlfcn.h or windows.h here to set default for --enable-plugins. Report error if someone tries to enable plugins on a host we don't support. bfd/ * configure.ac: Delete redundant plugin related checks. * configure: Regenerate. binutils/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gas/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * config.in: Regenerate. * configure: Regenerate. gprof/ * configure.ac: Move ACX_LARGEFILE after LT_INIT. * configure: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Move AC_PROG_CC and other macros earlier. Delete plugin checks now done in config/plugins.m4. * config.in: Regenerate. * configure: Regenerate.
2014-07-04Rename configure.in to configure.acAlan Modra1-1/+1
bfd/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. binutils/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.ac: Rename from configure.in. * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate.
2014-03-12autoreconfAlan Modra1-0/+18
Regenerate Makefile.in in bfd, binutils, gas, gold, gprof, ld, opcodes. Regenerate gas/config.in.
2012-09-10 * config.in: Disable sanity check for kfreebsd.Alan Modra1-1/+1
2012-06-18fix last commitAlan Modra1-18/+24
2012-06-18 * configure.in: Check DECLS for free, getenv, malloc, realloc,Alan Modra1-0/+18
* configure: Regenerate. * config.in: Likewise.
2012-05-17 PR 14072Nick Clifton1-0/+10
* configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.
2012-04-06binutils/Roland McGrath1-3/+6
2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. gas/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. gold/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate. ld/ 2012-04-06 Roland McGrath <mcgrathr@google.com> * configure.in (AC_CHECK_HEADERS): Add locale.h. * config.in: Regenerate. * configure: Regenerate.
2012-04-05 * configure.in (AC_CHECK_FUNCS): Add setlocale.Nick Clifton1-0/+6
(AM_LC_MESSAGES): Add. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate.
2010-07-03bfd/ChangeLog:Cary Coutant1-0/+3
* compress.c (bfd_uncompress_section_contents): Add ATTRIBUTE_UNUSED. * dwarf2.c (read_and_uncompress_section): New function. (read_section): Call it. (find_line): Likewise. binutils/ChangeLog: * objdump.c (load_specific_debug_section): Decompress section contents before applying relocations. * readelf.c (load_specific_debug_section): Update section size after decompression. gas/ChangeLog: * Makefile.am: Add compress-debug.c and compress-debug.h. * Makefile.in: Regenerate. * config.in: Add HAVE_ZLIB_H. * configure.in: Check for zlib.h. * configure: Regenerate. * as.c (parse_args): Add --compress-debug-sections and --nocompress-debug-sections. * as.h (flag_compress_debug): New variable. * compress-debug.c: New file. * compress-debug.h: New file. * write.c: Include compress-debug.h. (compress_frag): New function. (compress_debug): New function. (write_object_file): Compress debug sections if requested.
2010-06-032010-06-02 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-6/+0
* as.h: Remove conditionnal definition of HAVE_STDARG_H, USE_STDARG, va_alist, va_dcl, va_list, va_start, va_end. Remove conditionnal inclusion of stdarg.h and varargs.h. Assume ISO C. * config.in: Regenerate. * configure: Regenerate. * configure.in: Remove stdarg.h and varargs.h from AC_CHECK_HEADERS list. * messages.c (as_tsktsk): Remove non ISO C version. (as_warn, as_warn_where, as_bad, as_bad_where, as_fatal): Ditto.
2009-12-162009-12-15 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-0/+4
* as.h (mempcpy): New. * configure.in: Check if mempcpy is declared. * configure: Regenerated. * config.in: Likewise.
2009-09-07bfd/:Tristan Gingold1-0/+12
2009-09-07 Tristan Gingold <gingold@adacore.com> * bfd.m4 (BFD_HAVE_TIME_TYPE_MEMBER, BFD_HAVE_SYS_STAT_TYPE_MEMBER): Moved to gas/acinclude.m4 * configure.in: Move tests for tm_gmtoff, st_mtim.tv_sec and st_mtim.tv_nsec to gas/configure.in (bfd_elf64_ia64_vms_vec): Remove vmsutil.lo * configure: Regenerate. * config.in: Regenerate. * vmsutil.c: Moved to gas/config/te-vms.c * vmsutil.h: Removed. * Makefile.am (BFD32_BACKENDS_CFILES): Remove vmsutil.c (BFD32_BACKENDS): Remove vmsutil.lo * Makefile.in: Regenerate. gas/: 2009-09-07 Tristan Gingold <gingold@adacore.com> * Makefile.am (TARG_ENV_CFILES): New variable. Set to te-vms.c (POTFILES): Add $(TARG_ENV_CFILES) in definition. (EXTRA_as_new_SOURCES): Ditto. * Makefile: Regenerate. * acinclude.m4 (BFD_HAVE_TIME_TYPE_MEMBER, BFD_HAVE_SYS_STAT_TYPE_MEMBER): New macro created from bfd/bfd.m4. * configure.in: Add Tests for tm_gmtoff, st_mtim.tv_sec and st_mtim.tv_nsec (from bfd/configure.in). Check for time.h and sys/stat.h headers. Add te-vms.o in extra_objects if te_file is vms. * configure: Regenerate. * config.in: Regenerate. * config/te-vms.c: New file, from bfd/vmsutil.c (vms_dwarf2_file_time_name, vms_dwarf2_file_size_name) (vms_dwarf2_file_name): New functions. (vms_file_stats_name): Make it static, add a dirname parameter to locally create the full pathname. * config/te-vms.h: Add a copyright header. Declare the above functions. (DWARF2_FILE_TIME_NAME, DWARF2_FILE_SIZE_NAME, DWARF2_FILE_NAME): Use the above functions in the definition. * makefile.vms (OBJS): Add te-vms.obj. (te-vms.obj): Create a specific target. * configure.com: Create targ-env.h using a per target value. Compile te-vms.c for ia64.
2009-08-22Regenerate tree using Autoconf 2.64 and Automake 1.11.Ralf Wildenhues1-31/+40
config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.
2008-09-11bfd/Jan Kratochvil1-0/+6
Fix loading large elf64 binaries on 32bit hosts. * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. binutils/ Fix loading large elf64 binaries on 32bit hosts. * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. gas/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. gprof/ * configure.in: Call AC_SYS_LARGEFILE. * gconfig.in: Regenerate. * configure: Regenerate. ld/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate. libiberty/ * configure.in: Call AC_SYS_LARGEFILE. * config.in: Regenerate. * configure: Regenerate.
2008-08-15 PR 6526Alan Modra1-0/+32
* configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
2007-10-24 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.Alan Modra1-0/+5
Run "make dep-am". * configure.in: Invoke AC_GNU_SOURCE. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate.
2007-09-09gas/H.J. Lu1-0/+3
2007-09-08 H.J. Lu <hongjiu.lu@intel.com> * configure.in (AC_CHECK_HEADERS): Add limits.h. * configure: Regenerated. * config.in: Likewise. * config/tc-i386.c: Include "opcodes/i386-init.h". (_i386_insn): Use i386_operand_type for types. (cpu_arch_flags): Updated to new types with bitfield. (cpu_arch_tune_flags): Likewise. (cpu_arch_isa_flags): Likewise. (cpu_arch): Likewise. (i386_align_code): Likewise. (set_code_flag): Likewise. (set_16bit_gcc_code_flag): Likewise. (set_cpu_arch): Likewise. (md_assemble): Likewise. (parse_insn): Likewise. (process_operands): Likewise. (output_branch): Likewise. (output_jump): Likewise. (parse_real_register): Likewise. (mode_from_disp_size): Likewise. (smallest_imm_type): Likewise. (pi): Likewise. (type_names): Likewise. (pt): Likewise. (pte): Likewise. (swap_2_operands): Likewise. (optimize_imm): Likewise. (optimize_disp): Likewise. (match_template): Likewise. (check_string): Likewise. (process_suffix): Likewise. (check_byte_reg): Likewise. (check_long_reg): Likewise. (check_qword_reg): Likewise. (check_word_reg): Likewise. (finalize_imm): Likewise. (build_modrm_byte): Likewise. (output_insn): Likewise. (disp_size): Likewise. (imm_size): Likewise. (output_disp): Likewise. (output_imm): Likewise. (gotrel): Likewise. (i386_immediate): Likewise. (i386_displacement): Likewise. (i386_index_check): Likewise. (i386_operand): Likewise. (parse_real_register): Likewise. (i386_intel_operand): Likewise. (intel_e09): Likewise. (intel_bracket_expr): Likewise. (intel_e11): Likewise. (cpu_arch_flags_not): New. (cpu_flags_check_x64): Likewise. (cpu_flags_all_zero): Likewise. (cpu_flags_not): Likewise. (i386_cpu_flags_biop): Likewise. (cpu_flags_biop): Likewise. (cpu_flags_match); Likewise. (acc32): New. (acc64): Likewise. (control): Likewise. (reg16_inoutportreg): Likewise. (disp16): Likewise. (disp32): Likewise. (disp32s): Likewise. (disp16_32): Likewise. (anydisp): Likewise. (baseindex): Likewise. (regxmm): Likewise. (imm8): Likewise. (imm8s): Likewise. (imm16): Likewise. (imm32): Likewise. (imm32s): Likewise. (imm64): Likewise. (imm16_32): Likewise. (imm16_32s): Likewise. (imm16_32_32s): Likewise. (operand_type): Likewise. (operand_type_check): Likewise. (operand_type_match): Likewise. (operand_type_register_match): Likewise. (update_imm): Likewise. (set_code_flag): Also update cpu_arch_flags_not. (set_16bit_gcc_code_flag): Likewise. (md_begin): Likewise. (parse_insn): Use cpu_flags_check_x64 to check 64bit support. Use cpu_flags_match to match instructions. (i386_target_format): Update cpu_arch_isa_flags and cpu_arch_tune_flags to i386_cpu_flags type with bitfield. (smallest_imm_type): Check cpu_arch_tune to tune for i486. (match_template): Don't initialize overlap0, overlap1, overlap2, overlap3 and operand_types. (process_suffix): Handle crc32 with 64bit register. (MATCH): Removed. (CONSISTENT_REGISTER_MATCH): Likewise. * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags type. opcodes/ 2007-09-08 H.J. Lu <hongjiu.lu@intel.com> * configure.in (AC_CHECK_HEADERS): Add limits.h. * configure: Regenerated. * config.in: Likewise. * i386-gen.c: Include "sysdep.h" instead of <stdlib.h> and <string.h>. Use xstrerror instead of strerror. (initializer): New. (cpu_flag_init): Likewise. (bitfield): Likewise. (BITFIELD): New. (cpu_flags): Likewise. (opcode_modifiers): Likewise. (operand_types): Likewise. (compare): Likewise. (set_cpu_flags): Likewise. (output_cpu_flags): Likewise. (process_i386_cpu_flags): Likewise. (output_opcode_modifier): Likewise. (process_i386_opcode_modifier): Likewise. (output_operand_type): Likewise. (process_i386_operand_type): Likewise. (set_bitfield): Likewise. (operand_type_init): Likewise. (process_i386_initializers): Likewise. (process_i386_opcodes): Call process_i386_opcode_modifier to process opcode_modifier. Call process_i386_operand_type to process operand_types. (process_i386_registers): Call process_i386_operand_type to process reg_type. (main): Check unused bits in i386_cpu_flags and i386_operand_type. Sort cpu_flags, opcode_modifiers and operand_types. Call process_i386_initializers. * i386-init.h: New. * i386-tbl.h: Regenerated. * i386-opc.h: Include <limits.h>. (CHAR_BIT): Define as 8 if not defined. (Cpu186): Changed to position of bitfiled. (Cpu286): Likewise. (Cpu386): Likewise. (Cpu486): Likewise. (Cpu586): Likewise. (Cpu686): Likewise. (CpuP4): Likewise. (CpuK6): Likewise. (CpuK8): Likewise. (CpuMMX): Likewise. (CpuMMX2): Likewise. (CpuSSE): Likewise. (CpuSSE2): Likewise. (Cpu3dnow): Likewise. (Cpu3dnowA): Likewise. (CpuSSE3): Likewise. (CpuPadLock): Likewise. (CpuSVME): Likewise. (CpuVMX): Likewise. (CpuSSSE3): Likewise. (CpuSSE4a): Likewise. (CpuABM): Likewise. (CpuSSE4_1): Likewise. (CpuSSE4_2): Likewise. (Cpu64): Likewise. (CpuNo64): Likewise. (D): Likewise. (W): Likewise. (Modrm): Likewise. (ShortForm): Likewise. (Jump): Likewise. (JumpDword): Likewise. (JumpByte): Likewise. (JumpInterSegment): Likewise. (FloatMF): Likewise. (FloatR): Likewise. (FloatD): Likewise. (Size16): Likewise. (Size32): Likewise. (Size64): Likewise. (IgnoreSize): Likewise. (DefaultSize): Likewise. (No_bSuf): Likewise. (No_wSuf): Likewise. (No_lSuf): Likewise. (No_sSuf): Likewise. (No_qSuf): Likewise. (No_xSuf): Likewise. (FWait): Likewise. (IsString): Likewise. (RegKludge): Likewise. (IsPrefix): Likewise. (ImmExt): Likewise. (NoRex64): Likewise. (Rex64): Likewise. (Ugh): Likewise. (Reg8): Likewise. (Reg16): Likewise. (Reg32): Likewise. (Reg64): Likewise. (FloatReg): Likewise. (RegMMX): Likewise. (RegXMM): Likewise. (Imm8): Likewise. (Imm8S): Likewise. (Imm16): Likewise. (Imm32): Likewise. (Imm32S): Likewise. (Imm64): Likewise. (Imm1): Likewise. (BaseIndex): Likewise. (Disp8): Likewise. (Disp16): Likewise. (Disp32): Likewise. (Disp32S): Likewise. (Disp64): Likewise. (InOutPortReg): Likewise. (ShiftCount): Likewise. (Control): Likewise. (Debug): Likewise. (Test): Likewise. (SReg2): Likewise. (SReg3): Likewise. (Acc): Likewise. (FloatAcc): Likewise. (JumpAbsolute): Likewise. (EsSeg): Likewise. (RegMem): Likewise. (OTMax): Likewise. (Reg): Commented out. (WordReg): Likewise. (ImplicitRegister): Likewise. (Imm): Likewise. (EncImm): Likewise. (Disp): Likewise. (AnyMem): Likewise. (LLongMem): Likewise. (LongMem): Likewise. (ShortMem): Likewise. (WordMem): Likewise. (ByteMem): Likewise. (CpuMax): New (CpuLM): Likewise. (CpuNumOfUints): Likewise. (CpuNumOfBits): Likewise. (CpuUnused): Likewise. (OTNumOfUints): Likewise. (OTNumOfBits): Likewise. (OTUnused): Likewise. (i386_cpu_flags): New type. (i386_operand_type): Likewise. (i386_opcode_modifier): Likewise. (CpuSledgehammer): Removed. (CpuSSE4): Likewise. (CpuUnknownFlags): Likewise. (Reg): Likewise. (WordReg): Likewise. (ImplicitRegister): Likewise. (Imm): Likewise. (EncImm): Likewise. (Disp): Likewise. (AnyMem): Likewise. (LLongMem): Likewise. (LongMem): Likewise. (ShortMem): Likewise. (WordMem): Likewise. (ByteMem): Likewise. (template): Use i386_cpu_flags for cpu_flags, use i386_opcode_modifier for opcode_modifier, use i386_operand_type for operand_types. (reg_entry): Use i386_operand_type for reg_type. * Makefile.am (HFILES): Add i386-init.h. ($(srcdir)/i386-init.h): New rule. ($(srcdir)/i386-tbl.h): Depend on $(srcdir)/i386-init.h instead. * Makefile.in: Regenerated.
2007-07-02Regenerate files.Alan Modra1-0/+7
2007-04-21 * as.h (ENABLE_CHECKING): Default define to 0.Alan Modra1-0/+3
(know): Assert if ENABLE_CHECKING. (struct relax_type): Remove superfluous declaration. * configure.in (--enable-checking): New. * configure: Regenerate. * config.in: Regenerate. * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING. Check for duplicate powerpc_operands entries.
2006-08-03PR gas/2991Nick Clifton1-0/+3
* config.in: Regenerate.
2006-06-01 * config/obj-ieee.c: Delete.Alan Modra1-82/+2
* config/obj-ieee.h: Delete. * Makefile.am (OBJ_FORMATS): Remove ieee. (OBJ_FORMAT_CFILES, OBJ_FORMAT_HFILES): Similarly. (obj-ieee.o): Remove rule. * Makefile.in: Regenerate. * configure.in (atof): Remove tahoe. (OBJ_MAYBE_IEEE): Don't define. * configure: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2006-02-14gas/Jakub Jelinek1-0/+4
* config.in: Rebuilt. binutils/ * config.in: Rebuilt.
2005-08-11 * README-vms: Delete.Alan Modra1-9/+0
* config-gas.com: Delete. * makefile.vms: Delete. * vmsconf.sh: Delete. * config/atof-tahoe.c: Delete. * config/m88k-opcode.h: Delete. * config/obj-bout.c: Delete. * config/obj-bout.h: Delete. * config/obj-hp300.c: Delete. * config/obj-hp300.h: Delete. * config/tc-a29k.c: Delete. * config/tc-a29k.h: Delete. * config/tc-h8500.c: Delete. * config/tc-h8500.h: Delete. * config/tc-m88k.c: Delete. * config/tc-m88k.h: Delete. * config/tc-tahoe.c: Delete. * config/tc-tahoe.h: Delete. * config/tc-tic80.c: Delete. * config/tc-tic80.h: Delete. * config/tc-w65.c: Delete. * config/tc-w65.h: Delete. * config/te-aux.h: Delete. * config/te-delt88.h: Delete. * config/te-delta.h: Delete. * config/te-dpx2.h: Delete. * config/te-hp300.h: Delete. * config/te-ic960.h: Delete. * config/vms-a-conf.h: Delete. * doc/c-a29k.texi: Delete. * doc/c-h8500.texi: Delete. * doc/c-m88k.texi: Delete. * README: Remove obsolete examples, and list of supported targets. * Makefile.am: Remove a29k, h8500, m88k, tahoe, tic80, w65, bout and hp300 support. (DEP_FLAGS): Don't define BFD_ASSEMBLER. * configure.in: Remove --enable-bfd-assembler, need_bfd, primary_bfd_gas. * configure.tgt: Remove a29k, h8300-coff, h8500-*, i960 non-elf, m68k non bfd, m88k, or32-coff, tic80-*, vax non-bfd, w65k-*, *-nindy. * as.c: Remove all non-BFD_ASSEMBLER code, support for above targets. * as.h: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbg.c: Likewise. * ehopt.c: Likewise. * input-file.c: Likewise. * listing.c: Likewise. * literal.c: Likewise. * messages.c: Likewise. * obj.h: Likewise. * output-file.c: Likewise. * read.c: Likewise. * stabs.c: Likewise. * struc-symbol.h: Likewise. * subsegs.c: Likewise. * subsegs.h: Likewise. * symbols.c: Likewise. * symbols.h: Likewise. * tc.h: Likewise. * write.c: Likewise. * write.h: Likewise. * config/aout_gnu.h: Likewise. * config/obj-aout.c: Likewise. * config/obj-aout.h: Likewise. * config/obj-coff.c: Likewise. * config/obj-coff.h: Likewise. * config/obj-evax.h: Likewise. * config/obj-ieee.h: Likewise. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * config/tc-avr.c: Likewise. * config/tc-avr.h: Likewise. * config/tc-crx.h: Likewise. * config/tc-d10v.h: Likewise. * config/tc-d30v.h: Likewise. * config/tc-dlx.h: Likewise. * config/tc-fr30.h: Likewise. * config/tc-frv.h: Likewise. * config/tc-h8300.c: Likewise. * config/tc-h8300.h: Likewise. * config/tc-hppa.h: Likewise. * config/tc-i370.h: Likewise. * config/tc-i386.c: Likewise. * config/tc-i386.h: Likewise. * config/tc-i860.h: Likewise. * config/tc-i960.c: Likewise. * config/tc-i960.h: Likewise. * config/tc-ip2k.h: Likewise. * config/tc-iq2000.h: Likewise. * config/tc-m32c.h: Likewise. * config/tc-m32r.h: Likewise. * config/tc-m68hc11.h: Likewise. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * config/tc-maxq.c: Likewise. * config/tc-maxq.h: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mcore.h: Likewise. * config/tc-mn10200.h: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-mn10300.h: Likewise. * config/tc-ms1.h: Likewise. * config/tc-msp430.c: Likewise. * config/tc-msp430.h: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-ns32k.h: Likewise. * config/tc-openrisc.h: Likewise. * config/tc-or32.c: Likewise. * config/tc-or32.h: Likewise. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * config/tc-s390.h: Likewise. * config/tc-sh.c: Likewise. * config/tc-sh.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic30.h: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic4x.h: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-tic54x.h: Likewise. * config/tc-v850.h: Likewise. * config/tc-vax.c: Likewise. * config/tc-vax.h: Likewise. * config/tc-xstormy16.h: Likewise. * config/tc-xtensa.h: Likewise. * config/tc-z8k.c: Likewise. * config/tc-z8k.h: Likewise. * config/vms-a-conf.h * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * doc/as.texinfo: Likewise. * doc/Makefile.in: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * config.in: Regenerate. * po/POTFILES.in: Regenerate.
2005-07-14ChangeLog:Jim Blandy1-3/+3
2005-07-14 Jim Blandy <jimb@redhat.com> * configure.in: Add cases for Renesas m32c. * configure: Regenerated. bfd/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for m32c-*-elf (Renesas m32c and m16c). * Makefile.am (ALL_MACHINES): Add cpu-m32c.lo. (ALL_MACHINES_CFILES): Add cpu-m32c.c. (BFD32_BACKENDS): Add elf32-m32c.lo. (BFD32_BACKENDS_CFILES): Add elf32-m32c.c. (cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'. * Makefile.in: Regenerated. * archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New arch and mach codes. (bfd_m32c_arch): New arch info object. (bfd_archures_list): List bfd_m32c_arch. * bfd-in2.h: Regenerated. * config.bfd: Add case for the m32c. * configure.in: Add case for the m32c. * configure: Regenerated. * cpu-m32c.c, elf32-m32c.c: New files. * libbfd.h: Regenerated. * targets.c (bfd_elf32_m32c_vec): Declare. (_bfd_target_vector): List bfd_elf32_m32c_vec. binutils/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * readelf.c: #include "elf/m32c.h" (guess_is_rela, dump_relocations, get_machine_name): Add cases for EM_M32C. * Makefile.am (readelf.o): Update dependencies. * Makefile.in: Regenerated. cpu/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * m32c.cpu, m32c.opc: Machine description for the Renesas M32C. gas/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C. * Makefile.am (CPU_TYPES): List m32c. (TARGET_CPU_CFILES): List config/tc-m32c.c. (TARGET_CPU_HFILES): List config/tc-m32c.h. * configure.in: Add case for m32c. * configure.tgt: Add cases for m32c and m32c-*-elf. * configure: Regenerated. * config/tc-m32c.c, config/tc-m32c.h: New files. * doc/Makefile.am (CPU_DOCS): Add c-m32c.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set M32C. * doc/as.texinfo: Add text for the M32C-specific options and line comment characters, and refer to c-m32c.texi. * doc/c-m32c.texi: New file. include/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * dis-asm.h (print_insn_m32c): New declaration. include/elf/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for Renesas M32C and M16C. * common.h (EM_M32C): New machine number. * m32c.h: New file. ld/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o. (eelf32m32c.c): New target. * Makefile.in: Regenerated. * configure.tgt: Add case for m32c-*-elf. * emulparams/elf32m32c.sh: New file. opcodes/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New. * m32c-desc.h, m32c-opc.h: New. * Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h. (CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c. (ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo. (CLEANFILES): List stamp-m32c. (M32C_DEPS): List stamp-m32c, if CGEN_MAINT. (CGEN_CPUS): Add m32c. (m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c) (m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS. (m32c_opc_h): New variable. (stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo) (m32c-opc.lo): New rules. * Makefile.in: Regenerated. * configure.in: Add case for bfd_m32c_arch. * configure: Regenerated. * disassemble.c (ARCH_m32c): New. [ARCH_m32c]: #include "m32c-desc.h". (disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c. (disassemble_init_for_target) [ARCH_m32c]: Same. * cgen-ops.h, cgen-types.h: New files. * Makefile.am (HFILES): List them. * Makefile.in: Regenerated.
2005-04-01Add a check for <unistd.h> providing a prototype for getopt() which is ↵Nick Clifton1-0/+3
compatible with the one in include/getopt.h. If so then define HAVE_DECL_GETOPT.
2005-03-30 * as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.Aaron W. LaFramboise1-0/+3
* config.in: Regenerate. * configure: Regenerate. * configure.in: Check for ffs decl and alphabetize.