aboutsummaryrefslogtreecommitdiff
path: root/gas/as.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-2/+2
2019-11-28gas/riscv: Produce version 3 DWARF CIE by defaultAndrew Burgess1-4/+6
The flag controlling the default DWARF CIE version to produce now starts with the value -1. This can be modified with the command line flag as before, but after command line flag processing, in md_after_parse_args targets can, if the global still has the value -1, override this value. This gives a target specific default. If a CIE version is not select either by command line flag, or a target specific default, then some new code in dwarf2_init now select a global default. This remains as version 1 to match previous behaviour. This RISC-V has a target specific default of version provided, this make the return column uleb128, which means we can use all DWARF registers include CSRs. I chose to switch to version 3 rather than version 4 as this is most similar to the global default (version 1). Switching to version 4 adds additional columns to the CIE header. gas/ChangeLog: * as.c (flag_dwarf_cie_version): Change initial value to -1, and update comment. * config/tc-riscv.c (riscv_after_parse_args): Set flag_dwarf_cie_version if it has not already been set. * dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if needed. * testsuite/gas/riscv/default-cie-version.d: New file. * testsuite/gas/riscv/default-cie-version.s: New file. ld/ChangeLog: * testsuite/ld-elf/eh5.d: Accept version 3 DWARF CIE. Change-Id: Ibbfe8f0979fba480bf0a359978b09d2b3055555e
2019-11-18gas: Add --gdwarf-cie-version command line flagAndrew Burgess1-0/+17
Add a flag to control the version of CIE that is generated. By default gas produces CIE version 1, and this continues to be the default after this patch. However, a user can now provide --gdwarf-cie-version=NUMBER to switch to either version 3 or version 4 of CIE, version 2 was never released, and so causes an error as does any number less than 1 or greater than 4. Producing version 4 CIE requires two new fields to be added to the CIE, an address size field, and an segment selector field. For a flat address space the DWARF specification indicates that the segment selector should be 0, and the address size fields just contains the address size in bytes. For now we support 4 or 8 byte addresses, and the segment selector is always produced as 0. At some future time we might need to allow targets to override this. gas/ChangeLog: * as.c (parse_args): Parse --gdwarf-cie-version option. (flag_dwarf_cie_version): New variable. * as.h (flag_dwarf_cie_version): Declare. * dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to flag_dwarf_cie_version. * doc/as.texi (Overview): Document --gdwarf-cie-version. * NEWS: Likewise. * testsuite/gas/cfi/cfi.exp: Add new tests. * testsuite/gas/cfi/cie-version-0.d: New file. * testsuite/gas/cfi/cie-version-1.d: New file. * testsuite/gas/cfi/cie-version-2.d: New file. * testsuite/gas/cfi/cie-version-3.d: New file. * testsuite/gas/cfi/cie-version-4.d: New file. * testsuite/gas/cfi/cie-version.s: New file. include/ChangeLog: * dwarf2.h (DW_CIE_VERSION): Delete. Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
2019-09-19bfd_section_* macrosAlan Modra1-4/+4
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-03-18Use temp_ilp and restore_ilp in more placesAlan Modra1-4/+2
* as.c (macro_expr): Use temp_ilp and restore_ilp. * macro.c (buffer_and_nest): Likewise. * read.c (temp_ilp): Remove FIXME.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-2/+2
2018-10-15BFD_INIT_MAGICAlan Modra1-1/+2
This patch performs a run-time test that a shared libbfd.so has been compiled with the same size bfd_vma as that of apps using the library. On a 32-bit host it is easily possible to have one libbfd.so compiled to support 64-bit targets (or configured with --enable-64-bit-bfd) while another only supports 32-bit targets. The two libraries will have differently sized bfd_vma types, and if the wrong one is loaded all sorts of weird behaviour might be seen. bfd/ PR 23534 * init.c (BFD_INIT_MAGIC): Define. (bfd_init): Return BFD_INIT_MAGIC. bfd-in2.h: Regenerate. binutils/ PR 23534 * addr2line.c (main): Exit with fatal error if bfd_init returns an unexpected value. * ar.c (main): Likewise. * dlltool.c (identify_dll_for_implib): Likewise. * nm.c (main): Likewise. * objcopy.c (main): Likewise. * objdump.c (main): Likewise. * size.c (main): Likewise. * strings.c (main): Likewise. * windmc.c (main): Likewise. * windres.c (main): Likewise. gas/ PR 23534 * as.c (main): Exit with fatal error if bfd_init returns an unexpected value. ld/ PR 23534 * ldmain.c (main): Exit with fatal error if bfd_init returns an unexpected value.
2018-08-14When the assembler reports that the input and output are the same, report ↵Robert Yang1-7/+20
the file names involved, in order to help debugging. Also do not equate two files are the same if the have the same inode value but reside on different file systems. * as.c (main): Improve check for input file matching output file.
2018-08-09as --help: Display default option for --elf-stt-common=H.J. Lu1-1/+6
* as.c (show_usage): Display default option for --elf-stt-common=.
2018-05-14Fix a problem in the assembler when checking for overlapping input and ↵Nick Clifton1-1/+1
output files on non-POSIX compliant systems. PR 23153 * as.c (main): When checking for an output file that is also an input file, also check that the inode is not zero.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-1/+27
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-04-12Stop the assembler from overwriting its output file.John Darrington1-0/+22
* as.c (main): Fail if the output is the same as one of the input files. * testsuite/gas/all/gas.exp: Test the new feature.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-2/+2
2017-11-23Fix build error with --enable-targets=all.Jim Wilson1-0/+4
gas/ * as.c (INITIALIZING_EMULS): Define. * config/obj-multi.h (FAKE_LABEL_NAME): When INITIALIZING_EMULS set, don't define it.
2017-11-22Riscv ld-elf/stab failure and fake label cleanup.Jim Wilson1-2/+3
* as.c: Include write.h. (common_emul_init): Use FAKE_LABEL_NAME. * ecoff.c (add_file, ecoff_directive_end, ecoff_directive_loc): Likewise. (ecoff_build_symbols): Use FAKE_LABEL_CHAR. * expr.c (get_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. * read.c (input_from_string): New. (read_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. (temp_ilp): Set input_from_string to TRUE. (restore_ilp): Set input_from_string to FALSE. * read.h (input_from_string): Declare. * symbols.c: Include write.h (S_IS_LOCAL): Check for FAKE_LABEL_CHAR. (symbol_relc_make_sym): Fix comment refering to default fake label string. * write.h (FAKE_LABEL_CHAR): New. * config/tc-riscv.h (FAKE_LABEL_CHAR): Define. * testsuite/gas/all/err-fakelabel.s: New.
2017-11-07gas and ld pluralization fixesAlan Modra1-9/+4
gas/ * as.c (main): Properly pluralize messages. * frags.c (frag_grow): Likewise. * read.c (emit_expr_with_reloc, emit_expr_fix): Likewise. (parse_bitfield_cons): Likewise. * write.c (fixup_segment, compress_debug, write_contents): Likewise. (relax_segment): Likewise. * config/tc-arm.c (s_arm_elf_cons): Likewise. * config/tc-cr16.c (l_cons): Likewise. * config/tc-i370.c (i370_elf_cons): Likewise. * config/tc-m68k.c (m68k_elf_cons): Likewise. * config/tc-msp430.c (msp430_operands): Likewise. * config/tc-s390.c (s390_elf_cons, s390_literals): Likewise. * config/tc-mcore.c (md_apply_fix): Likewise. * config/tc-tic54x.c (md_assemble): Likewise. * config/tc-xtensa.c (xtensa_elf_cons): Likewise. (xg_expand_assembly_insn): Likewise. * config/xtensa-relax.c (build_transition): Likewise. ld/ * ldlang.c (lang_size_sections_1): Properly pluralize messages. (lang_check_section_addresses): Likewise.
2017-07-19Remove datasize measurements based on sbrk()Tristan Gingold1-19/+0
binutils/ * nm.c (show_stats): Remove variable. (long_options): Remove --stats option. (main): Remove handling of --stats. ld/ * ldmain.c (main): Remove display of data size. gas/ * as.c (start_sbrk): Remove. (main): Remove assignment. (dump_statistics): Remove display of data size.
2017-01-18Catch gas exit-via-signalNathan Sidwell1-0/+1
gas/ * as.h (gas_assert): Use abort. (as_assert): Remove. (signal_init): Declare. * as.c (main): Call signal_init. * messages.c: #include <signal.h> (as_assert): Delete. (as_abort): Allow NULL FILE. (signal_crash): New. (signal_init): Register fatal signal handlers. * configure.ac: Check for strsignal. * config.in: Rebuilt. * configure: Rebuilt.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-2/+2
2016-06-30Allow ARC target to be configured with --with-cpu=<cpu-name>.Andrew Burgess1-0/+6
gas * config.in (TARGET_WITH_CPU): Undefine. * configure.ac: Add --with-cpu support, and define in config.h. * configure: Regenerate. * config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU. * NEWS: Mention new configure option.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-1/+9
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-05-13use XNEW and related macros moreTrevor Saunders1-2/+2
Its a bit shorter and simpler than raw xmalloc. gas/ChangeLog: 2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * app.c (app_push): Use XNEW and related macros. * as.c (parse_args): Likewise. * cgen.c (make_right_shifted_expr): Likewise. (gas_cgen_tc_gen_reloc): Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/obj-coff.c (stack_init): Likewise. (stack_push): Likewise. (coff_obj_symbol_new_hook): Likewise. (coff_obj_symbol_clone_hook): Likewise. (add_lineno): Likewise. (coff_frob_symbol): Likewise. * config/obj-elf.c (obj_elf_section_name): Likewise. (build_group_lists): Likewise. * config/obj-evax.c (evax_symbol_new_hook): Likewise. * config/obj-macho.c (obj_mach_o_indirect_symbol): Likewise. * config/tc-aarch64.c (insert_reg_alias): Likewise. (find_or_make_literal_pool): Likewise. (add_to_lit_pool): Likewise. (fill_instruction_hash_table): Likewise. * config/tc-alpha.c (load_expression): Likewise. (emit_jsrjmp): Likewise. (s_alpha_ent): Likewise. (s_alpha_end): Likewise. (s_alpha_linkage): Likewise. (md_begin): Likewise. (tc_gen_reloc): Likewise. * config/tc-arc.c (arc_insert_opcode): Likewise. (arc_extcorereg): Likewise. * config/tc-bfin.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-cris.c: Likewise. * config/tc-crx.c (preprocess_reglist): Likewise. * config/tc-d10v.c: Likewise. * config/tc-frv.c (frv_insert_vliw_insn): Likewise. (frv_tomcat_shuffle): Likewise. * config/tc-h8300.c: Likewise. * config/tc-i370.c (i370_macro): Likewise. * config/tc-i386.c (lex_got): Likewise. (md_parse_option): Likewise. * config/tc-ia64.c (alloc_record): Likewise. (set_imask): Likewise. (save_prologue_count): Likewise. (dot_proc): Likewise. (dot_endp): Likewise. (ia64_frob_label): Likewise. (add_qp_imply): Likewise. (add_qp_mutex): Likewise. (mark_resource): Likewise. (dot_alias): Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c (m68k_frob_label): Likewise. (s_save): Likewise. (mri_control_label): Likewise. (push_mri_control): Likewise. (build_mri_control_operand): Likewise. (s_mri_else): Likewise. (s_mri_break): Likewise. (s_mri_next): Likewise. (s_mri_for): Likewise. (s_mri_endw): Likewise. * config/tc-metag.c (create_mnemonic_htab): Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c (s_loc): Likewise. * config/tc-nds32.c (nds32_relax_hint): Likewise. * config/tc-nios2.c (nios2_insn_reloc_new): Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c (rx_include): Likewise. * config/tc-sh.c: Likewise. * config/tc-sh64.c (shmedia_frob_section_type): Likewise. * config/tc-sparc.c: Likewise. * config/tc-spu.c: Likewise. * config/tc-tic6x.c (static tic6x_unwind_info *tic6x_get_unwind): Likewise. (tic6x_start_unwind_section): Likewise. * config/tc-tilegx.c: Likewise. * config/tc-tilepro.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xgate.c: Likewise. * config/tc-xtensa.c (xtensa_translate_old_userreg_ops): Likewise. (new_resource_table): Likewise. (resize_resource_table): Likewise. (xtensa_create_trampoline_frag): Likewise. (xtensa_maybe_create_literal_pool_frag): Likewise. (cache_literal_section): Likewise. * config/xtensa-relax.c (append_transition): Likewise. (append_condition): Likewise. (append_value_condition): Likewise. (append_constant_value_condition): Likewise. (append_literal_op): Likewise. (append_label_op): Likewise. (append_constant_op): Likewise. (append_field_op): Likewise. (append_user_fn_field_op): Likewise. (enter_opname_n): Likewise. (enter_opname): Likewise. (split_string): Likewise. (parse_insn_templ): Likewise. (clone_req_or_option_list): Likewise. (clone_req_option_list): Likewise. (parse_option_cond): Likewise. (parse_insn_pattern): Likewise. (parse_insn_repl): Likewise. (build_transition): Likewise. (build_transition_table): Likewise. * dw2gencfi.c (alloc_fde_entry): Likewise. (alloc_cfi_insn_data): Likewise. (cfi_add_CFA_remember_state): Likewise. (dot_cfi_escape): Likewise. (dot_cfi_fde_data): Likewise. (select_cie_for_fde): Likewise. * dwarf2dbg.c (dwarf2_directive_loc): Likewise. * ecoff.c (ecoff_add_bytes): Likewise. (ecoff_build_debug): Likewise. * input-scrub.c (input_scrub_push): Likewise. (input_scrub_begin): Likewise. (input_scrub_next_buffer): Likewise. * itbl-ops.c (append_insns_as_macros): Likewise. (alloc_entry): Likewise. (alloc_field): Likewise. * listing.c (listing_newline): Likewise. (listing_listing): Likewise. * macro.c (get_any_string): Likewise. (delete_macro): Likewise. * stabs.c (generate_asm_file): Likewise. (stabs_generate_asm_lineno): Likewise. * subsegs.c (subseg_change): Likewise. (subseg_get): Likewise. * symbols.c (define_dollar_label): Likewise. (symbol_relc_make_sym): Likewise. * write.c (write_relocs): Likewise.
2016-04-03use XNEW and related macros moreTrevor Saunders1-1/+1
gas/ChangeLog: 2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * app.c (app_push): use XNEW macro. * as.c: Likewise. * config/obj-elf.c (obj_elf_change_section): Likewise. (elf_copy_symbol_attributes): Likewise. (obj_elf_size): Likewise. (build_group_lists): Likewise. * config/tc-aarch64.c (add_operand_error_record): Likewise. (md_assemble): Likewise. (tc_gen_reloc): Likewise. (get_upper_str): Likewise. (aarch64_parse_features): Likewise. * config/tc-arm.c (insert_reg_alias): Likewise. (insert_neon_reg_alias): Likewise. (find_or_make_literal_pool): Likewise. (s_arm_elf_cons): Likewise. (add_unwind_opcode): Likewise. (arm_parse_extension): Likewise. * config/tc-avr.c (create_record_for_frag): Likewise. * config/tc-crx.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-dlx.c (s_proc): Likewise. * config/tc-ft32.c: Likewise. * config/tc-h8300.c: Likewise. * config/tc-hppa.c (pa_proc): Likewise. (create_new_space): Likewise. (create_new_subspace): Likewise. * config/tc-i860.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-iq2000.c (iq2000_add_macro): Likewise. (iq2000_record_hi16): Likewise. * config/tc-m32c.c (m32c_indirect_operand): Likewise. * config/tc-m32r.c (debug_sym): Likewise. (m32r_record_hi16): Likewise. * config/tc-m68k.c (m68k_ip): Likewise. (md_begin): Likewise. * config/tc-mcore.c: Likewise. * config/tc-microblaze.c (check_got): Likewise. * config/tc-mips.c (append_insn): Likewise. (s_mipsset): Likewise. (mips_record_label): Likewise. (s_mips_end): Likewise. * config/tc-mmix.c (mmix_frob_file): Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-moxie.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-nds32.c (nds32_elf_save_pseudo_pattern): Likewise. * config/tc-ns32k.c: Likewise. * config/tc-or1k.c: Likewise. * config/tc-pdp11.c: Likewise. * config/tc-pj.c (fake_opcode): Likewise. * config/tc-ppc.c (ppc_apuinfo_section_add): Likewise. (ppc_macro): Likewise. (ppc_dwsect): Likewise. (ppc_machine): Likewise. * config/tc-rl78.c (rl78_frag_init): Likewise. * config/tc-rx.c (rx_frag_init): Likewise. * config/tc-s390.c (s390_lit_suffix): Likewise. (s390_machine): Likewise. (s390_machinemode): Likewise. * config/tc-score.c (s3_insert_reg): Likewise. (s3_gen_reloc): Likewise. * config/tc-score7.c (s7_insert_reg): Likewise. (s7_gen_reloc): Likewise. * config/tc-tic30.c (tic30_operand): Likewise. * config/tc-tic4x.c (tic4x_inst_make): Likewise. * config/tc-tic54x.c (stag_add_field): Likewise. (tic54x_struct): Likewise. (tic54x_space): Likewise. (tic54x_field): Likewise. (tic54x_mlib): Likewise. (subsym_substitute): Likewise. * config/tc-tic6x.c (tic6x_frob_label): Likewise. * config/tc-vax.c: Likewise. * config/tc-xc16x.c: Likewise. * config/tc-xtensa.c (xtensa_add_insn_label): Likewise. (directive_push): Likewise. (xtensa_begin_directive): Likewise. (tokenize_arguments): Likewise. (xtensa_add_literal_sym): Likewise. (new_resource_table): Likewise. (resize_resource_table): Likewise. (emit_single_op): Likewise. (xtensa_create_trampoline_frag): Likewise. (xtensa_maybe_create_literal_pool_frag): Likewise. (xtensa_add_config_info): Likewise. (xtensa_realloc_fixup_cache): Likewise. (add_subseg_info): Likewise. (cache_literal_section): Likewise. (add_xt_block_frags): Likewise. (add_xt_prop_frags): Likewise. (init_op_placement_info_table): Likewise. (build_section_rename): Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * depend.c (register_dependency): Likewise. * dwarf2dbg.c (get_line_subseg): Likewise. (dwarf2_gen_line_info_1): Likewise. (get_filenum): Likewise. * ecoff.c (allocate_scope): Likewise. (allocate_vlinks): Likewise. (allocate_shash): Likewise. (allocate_thash): Likewise. (allocate_tag): Likewise. (allocate_forward): Likewise. (allocate_thead): Likewise. (allocate_lineno_list): Likewise. * expr.c (make_expr_symbol): Likewise. * hash.c (hash_new_sized): Likewise. * input-file.c (input_file_push): Likewise. * listing.c (file_info): Likewise. (listing_newline): Likewise. * macro.c (new_formal): Likewise. (define_macro): Likewise. * remap.c (add_debug_prefix_map): Likewise. * symbols.c (symbol_find_noref): Likewise. (define_dollar_label): Likewise. (fb_label_instance_inc): Likewise. (symbol_relc_make_value): Likewise.
2016-03-31cast to char * when assigning to optargTrevor Saunders1-1/+1
gas/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * as.c (parse_args): Cast literal to char * when assigning to optarg.
2016-03-25rename flag_size_check to flag_allow_nonconst_size and make it a boolTrevor Saunders1-2/+2
This name describes what the variable means slightly better, and the enum with two values that is only used for this one variable is kind of silly. gas/ChangeLog: 2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * as.c (parse_args): Adjust. * as.h (flag_size_check): Rename to flag_allow_nonconst_size. * config/obj-elf.c (elf_frob_symbol): Adjust.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+19
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-25Convert more variables to a constant form.Trevor Saunders1-2/+3
* as.c (select_emulation_mode): Add const qualifiers. * as.h: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c (struct aarch64_option_table): Likewise. (struct aarch64_cpu_option_table): Likewise. (struct aarch64_arch_option_table): Likewise. (struct aarch64_option_cpu_value_table): Likewise. (struct aarch64_long_option_table): Likewise. (struct aarch64_option_abi_value_table): Likewise. * config/tc-arm.c (struct reloc_entry): Likewise. (tc_gen_reloc): Likewise. (struct arm_option_table): Likewise. (struct arm_legacy_option_table): Likewise. (struct arm_cpu_option_table): Likewise. (struct arm_arch_option_table): Likewise. (struct arm_option_extension_value_table): Likewise. (struct arm_option_fpu_value_table): Likewise. (struct arm_option_value_table): Likewise. (struct arm_long_option_table): Likewise. * config/tc-avr.c (struct avr_opcodes_s): Likewise. (struct mcu_type_s): Likewise. (struct exp_mod_s): Likewise. (avr_operand): Likewise. (avr_operands): Likewise. * config/tc-d10v.c (md_begin): Likewise. * config/tc-dlx.c: Likewise. * config/tc-fr30.c (fr30_is_colon_insn): Likewise. * config/tc-ft32.c (parse_condition): Likewise. * config/tc-h8300.c (do_a_fix_imm): Likewise. * config/tc-hppa.c (pa_ip): Likewise. (hppa_regname_to_dw2regnum): Likewise. * config/tc-i370.c (i370_elf_suffix): Likewise. * config/tc-i960.c (struct tabentry): Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * config/tc-mcore.c (parse_psrmod): Likewise. * config/tc-metag.c (struct metag_core_option): Likewise. (struct metag_long_option): Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c (macro): Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c (struct rcodes_s): Likewise. (struct hcodes_s): Likewise. (md_parse_option): Likewise. * config/tc-ns32k.c (struct ns32k_option): Likewise. (optlist): Likewise. * config/tc-ppc.c (ppc_elf_suffix): Likewise. (tc_ppc_regname_to_dw2regnum): Likewise. * config/tc-ppc.h: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c (struct cpu_type): Likewise. * config/tc-sh.c (sh_regname_to_dw2regnum): Likewise. * config/tc-sparc.c (struct priv_reg_entry): Likewise. (sparc_ip): Likewise. * config/tc-spu.c (insn_fmt_string): Likewise. * config/tc-tic54x.c (tic54x_set_default_include): Likewise. * config/tc-v850.c: Likewise. * config/tc-visium.c (struct visium_arch_option_table): Likewise. (struct visium_long_option_table): Likewise. * config/tc-xgate.c: Likewise. * config/tc-z8k.c: Likewise. * read.c (add_include_dir): Likewise. * read.h: Likewise.
2016-01-01Copyright update for binutilsAlan Modra1-2/+2
2015-10-19Add a gas configure option to select the default behaviour for the ↵Nick Clifton1-1/+15
generation of debug sections - compressed or uncompressed. PR gas/19109 * configure.ac: Add option --enable-compressed-debug-sections. This sets the default behaviour for compressing debug sections. * as.c (flag_compress_debug): Define and initialise to COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set. (show_usage): Indicate whether --no-compress-debug-sections or --compress-debug-sections is the default. * config/tc-i386.c (flag_compress_debug): Delete definition. * doc/as.texinfo (--nocompress-debug-sectionas): Update description. * NEWS: Announce the new feature. * config.in: Regenerate. * configure: Regenerate.
2015-07-14Make default compression gABI compliantH.J. Lu1-2/+2
All programs in binutils+gdb git repo now support gABI compression with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option as compression default for gas, gold, ld and objcopy, instead of the zlib-gnu option whose outputs are incompatible with gABI. binutils/ * objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not zlib-gnu. * doc/binutils.texi: Change --compress-debug-sections and --compress-debug-sections=zlib to zlib-gabi. binutils/testsuite/ * binutils-all/compress.exp: Update. gas/ * as.c (parse_args): Make --compress-debug-sections and --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * doc/as.texinfo: Change --compress-debug-sections and --compress-debug-sections=zlib to zlib-gabi. gold/ * compressed_output.cc (Output_compressed_section::set_final_data_size): Make --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * testsuite/Makefile.am (flagstest_compress_debug_sections.check): Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of ".zdebug_". * testsuite/Makefile.in: Regenerated. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make --compress-debug-sections=zlib the same as --compress-debug-sections=zlib-gabi. * ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi. ld/testsuite/ * ld-elf/zlibbegin.rS: Updated to .debug_.* with the SHF_COMPRESSED bit. * ld-elf/zlibnormal.rS: Likewise.
2015-06-28Remove COMPRESS_DEBUG_ZLIBH.J. Lu1-1/+1
COMPRESS_DEBUG_ZLIB isn't needed. This patch removes COMPRESS_DEBUG_ZLIB and replace COMPRESS_DEBUG_ZLIB with COMPRESS_DEBUG_GNU_ZLIB. bfd/ * bfd-in.h (compressed_debug_section_type): Remove COMPRESS_DEBUG_ZLIB. * bfd-in2.h : Regenerated. gas/ * as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with COMPRESS_DEBUG_GNU_ZLIB. * config/tc-i386.c (flag_compress_debug): Likewise. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Replace COMPRESS_DEBUG_ZLIB with COMPRESS_DEBUG_GNU_ZLIB.
2015-06-17gas: section name substitution sequenceNicolas Pitre1-0/+8
This patch adds the ability to automatically construct a section name based on the prior section. When gas is invoked with --sectname-subst, the occurrence of %S in a section name will be substituted by the name of the current section. For example: .macro exception_code .pushsection %S.exception [exception code here] .popsection .endm .text [code] exception_code [...] .section .init [init code] exception_code [...] The first and second exception_code invocations create the .text.exception and the .init.exception sections respectively. This is useful e.g. to discriminate between anciliary sections that are tied to .init code and can be discarded at run time when initialization is over vs anciliary sections tied to .text sections that need to stay resident. * as.c (show_usage): Document --sectname-subst. (parse_args): Add --sectname-subst. * as.h (flag_sectname_subst): New. * config/obj-elf.c (obj_elf_section_name): Add %S substitution. * doc/as.texinfo: Document it.
2015-04-08Add SHF_COMPRESSED support to gas and objcopyH.J. Lu1-4/+24
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-03-31Add --with-system-zlib in gasH.J. Lu1-6/+0
This patch adds --with-system-zlib and remove --with-zlib in gas. gas/ * Makefile.am (ZLIBINC): New. (AM_CFLAGS): Add $(ZLIBINC). * as.c: (show_usage): Don't check HAVE_ZLIB_H. (parse_args): Likewise. * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>. (compress_init): Don't check HAVE_ZLIB_H. (compress_data): Likewise. (compress_finish): Likewise. * configure.ac (AM_ZLIB): Removed. (zlibinc): New. AC_SUBST. Add --with-system-zlib. * Makefile.in: Regenerated. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. gas/testsuite/ * gas/i386/dw2-compress-1.d: Expect .zdebug_info.
2015-01-02Correct printed year in copyright noticesAlan Modra1-1/+1
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-2/+2
2014-09-292014-09-29 Terry Guo <terry.guo@arm.com>Terry Guo1-31/+0
* as.c (create_obj_attrs_section): Move it and call it from ... * write.c (create_obj_attrs_section): ... here. (subsegs_finish_section): Refactored.
2014-06-16Run write_object_file after errorsAlan Modra1-20/+39
This is to fix unitialised memory access when printing listings. Many targets don't initialise parts of insn frags or data frags that have fixups, relying on md_apply_fix to finalise the frag. Which is fine normally, but means we need to run write_object_file after errors, for listings. Otherwise MALLOC_PERTURB_=1 causes errors like: x86_64-linux +FAIL: i386 mpx-inval-1 x86_64-linux +FAIL: i386 inval-equ-1 x86_64-linux +FAIL: i386 x86-64-mpx-inval-1 Running write_object_file after errors requires some tweaking to the testsuite, since we then get extra errors reported from md_apply_fix. gas/ * write.h (subsegs_finish): Delete declaration. * write.c (subsegs_finish): Make static. (write_object_file): Call subsegs_finish from here. Don't print warning and error count here.. * as.c (main): ..do so here instead. Remove dead code for "no object file generated". Split out count strings to better support internationalisation. Don't call subsegs_finish. Tidy setting of "keep_it". Run write_object_file even after errors. (keep_it): Make static. * config/obj-elf.c (elf_frob_symbol): Remove assert. (elf_frob_file_before_adjust): Likewise. gas/testsuite/ * gas/elf/bad-group.s: Use %function. * gas/elf/bad-group.err: Expect correct line number. Allow other errors. * gas/elf/bad-size.err: Allow other errors. Match expected error somewhat more rigorously. * gas/i386/reloc32.l: Allow other errors. * gas/i386/mpx-inval-1.l: Match applied relocs. * gas/i386/x86-64-mpx-inval-1.l: Likewise, and nop padding. * gas/i386/x86-64-mpx-inval-2.l: Match nop padding, and allow other errors. * gas/macros/dot.s: Use .balign. * gas/macros/dot.l: Update alignment output. * gas/symver/symver6.l: Allow other errors.
2014-03-05Update copyright yearsAlan Modra1-2/+2
2014-01-08Update copyright year to 2014H.J. Lu1-2/+2
binutils/ * version.c (print_version): Update copyright year to 2014. gas/ * as.c (parse_args): Update copyright year to 2014. gold/ * version.cc (print_version): Update copyright year to 2014. ld/ * ldver.c (ldversion): Update copyright year to 2014. opcodes/ * i386-gen.c (process_copyright): Update copyright year to 2014.
2013-06-22 * configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)Richard Sandiford1-1/+0
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier]) (mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs. * configure: Regenerate. gas/ * NEWS: Note removal of ECOFF support. * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF. * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h. (MULTI_CFILES): Remove config/e-mipsecoff.c. * Makefile.in: Regenerate. * configure.in: Remove MIPS ECOFF references. (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff): Delete cases. (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*) (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into... (mips-*-*): ...this single case. (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect MIPS emulations to be e-mipself*. * configure: Regenerate. * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*) (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*) (mips-*-sysv*): Remove coff and ecoff cases. * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove. * ecoff.c: Remove reference to MIPS ECOFF. * config/e-mipsecoff.c, config/te-lnews.h: Delete files. * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete. (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases. (mips_hi_fixup): Tweak comment. (append_insn): Require a howto. (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code. gas/testsuite/ * gas/all/gas.exp: Remove reference to mips-ecoff. * gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d, gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d, gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove skips for mips-*-ecoff. ld/ * NEWS: Document the removal of MIPS ECOFF targets. * ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than MIPS ECOFF as an example of a target that supports small data. * ldmain.c (g_switch_value): Likewise. * configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*) (mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*) (mips*-*-bsd*, mips*-*-lnews*): Remove cases. * Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c. (emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c) (emipslnews.c, emipspe.c): Delete rules. * Makefile.in: Regenerate. * emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh, emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh, emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete. * emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support has now been removed. * emultempl/pe.em: Remove TARGET_IS_mipspe checks.
2013-04-29 * elflink.c (_bfd_elf_gc_mark_extra_sections): Remove mark fromNick Clifton1-4/+9
fragmented .debug_line sections associated with unmarked code sections. * dwarf.c (read_debug_line_header): New function. Reads in a header in a .debug_line section. (display_debug_lines_raw): Use new function. Handle fragmentary .debug_line sections. (display_debug_lines_decoded): Likewise. * readelf.c (process_section_headers): Handle fragmenatry .debug_line sections. (display_debug_section): Likewise. * as.c (Options): Add -gdwarf-sections. (parse_args): Likewise. * as.h (flag_dwarf_sections): Declare. * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes. (process_entries): When -gdwarf-sections is enabled generate fragmentary .debug_line sections. (out_debug_line): Set the section for the .debug_line section end symbol. * doc/as.texinfo: Document -gdwarf-sections. * NEWS: Mention -gdwarf-sections. * gas/elf/dwarf2-3.d: Fix expected readelf output. * scripttempl/DWARF.sc: Add support for .debug_line.* and .debug_line_end.
2013-01-10Remove trailing white spaces on gasH.J. Lu1-6/+6
* app.c: Remove trailing white spaces. * as.c: Likewise. * as.h: Likewise. * cond.c: Likewise. * dw2gencfi.c: Likewise. * dwarf2dbg.h: Likewise. * ecoff.c: Likewise. * input-file.c: Likewise. * itbl-lex.h: Likewise. * output-file.c: Likewise. * read.c: Likewise. * sb.c: Likewise. * subsegs.c: Likewise. * symbols.c: Likewise. * write.c: Likewise. * config/tc-i386.c: Likewise. * doc/Makefile.am: Likewise. * doc/Makefile.in: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cr16.texi: Likewise. * doc/c-d10v.texi: Likewise. * doc/c-d30v.texi: Likewise. * doc/c-h8300.texi: Likewise. * doc/c-hppa.texi: Likewise. * doc/c-i370.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-i860.texi: Likewise. * doc/c-m32c.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68hc11.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-microblaze.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-s390.texi: Likewise. * doc/c-score.texi: Likewise. * doc/c-sh.texi: Likewise. * doc/c-sh64.texi: Likewise. * doc/c-tic54x.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-xc16x.texi: Likewise. * doc/c-xgate.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/internals.texi: Likewise.
2013-01-02Update copyright year to 2013H.J. Lu1-2/+2
binutils/ 2013-01-02 H.J. Lu <hongjiu.lu@intel.com> * version.c (print_version): Update copyright year to 2013. gas/ 2013-01-02 H.J. Lu <hongjiu.lu@intel.com> * as.c (parse_args): Update copyright year to 2013. ld/ 2013-01-02 H.J. Lu <hongjiu.lu@intel.com> * ldver.c (ldversion): Update copyright year to 2013. opcodes/ 2013-01-02 H.J. Lu <hongjiu.lu@intel.com> * i386-gen.c (process_copyright): Update copyright year to 2013.
2012-10-22 * as.c (dump_statistics): Compute data size as the delta betweenSimon Baldwin1-1/+7
current sbrk(0) and start_sbrk. * (main): Set start_sbrk to sbrk(0) on entry.
2012-06-07 PR gas/14201Alan Modra1-3/+3
* sb.h (sb_max_power_two): Delete. (struct sb): Delete "item" and "pot". Make "len" a size_t. Add "max". (sb_element): Delete. (sb_add_char, sb_add_buffer, sb_skip_comma, sb_skip_write): Update prototypes. * sb.c (string_count, free_list): Delete. (sb_build, sb_kill, sb_check): Rewrite. (scrub_from_sb, sb_add_char, sb_add_string, sb_add_buffer, sb_skip_white, sb_skip_comma): Replace assorted int params, vars and return types with size_t. * input-scrub.c: Likewise. * macro.c: Likewise. * macro.h: Likewise. * as.c: Likewise. * as.h: Likewise. * input-file.h: Likewise. * input-file.c: Likewise. * read.c: Likewise. * app.c: ..or ptrdiff_t. * input-file.c (input_file_get): Use ferror. (input_file_give_next_buffer): Use input_file_get.
2012-01-17Update copyright message year.Alan Modra1-2/+2
2011-12-29adjust mach-o default GAS sections.Iain Sandoe1-0/+6
gas: * as.c (perform_an_assembly_pass): Do not create text, data and bss sections for MACH-O. Do not switch to the text section. * config/obj-macho.c (obj_mach_o_segT_from_bfd_name): Forward decl. (mach_o_begin): Startup with only text section unless suppressed. * config/obj-macho.h (obj_begin): define to mach_o_begin (). gas/testsuite: * gas/mach-o/sections-1.d: Amend to recognize that bss is not emitted by default. * gas/mach-o/sections-2.d: New.
2011-10-12 * as.c (main): Define .gasversion. rather than __GAS_VERSION__.Alan Modra1-2/+2
* frags.h (bss_address_frag): Delete (predefined_address_frag): New. * frags.c (frag_init): Init predefined_address_frag. Delete ref to bss_addres_frag. * symbols.c (S_CAN_BE_REDEFINED): New function. * symbols.h (S_CAN_BE_REDEFINED): Declare. * read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
2011-10-12 * symbols.c (local_symbol_make): Make global.Alan Modra1-0/+3
* symbols.h (local_symbol_make): Declare. * as.c (main): Define __GAS_VERSION__.
generated by cgit v1.1 at 2024-11-23 17:59:27 +0000