aboutsummaryrefslogtreecommitdiff
path: root/gas/Makefile.in
AgeCommit message (Collapse)AuthorFilesLines
2016-07-16Don't include libbfd.h outside of bfd, part 1Alan Modra1-3/+3
Make BFD_ALIGN available to objcopy. Fix assertions. Don't use bfd_log2 in ppc32elf.em or bfd_malloc in xtensaelf.em and bucomm.c. bfd/ * libbfd-in.h (BFD_ALIGN): Move to.. * bfd-in.h: ..here. * elf32-ppc.h (struct ppc_elf_params): Add pagesize. * elf32-ppc.c (default_params): Adjust init. (ppc_elf_link_params): Set pagesize_p2. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. binutils/ * ar.c: Don't include libbfd.h. * objcopy.c: Likewise. * bucomm.c (bfd_get_archive_filename): Use xmalloc rather than bfd_malloc. gas/ * config/bfin-parse.y: Don't include libbfd.h. * config/tc-bfin.c: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-metag.c: Likewise. (create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT. * Makefile.am: Update dependencies. * Makefile.in: Regenerate. ld/ * ldlang.c: Don't include libbfd.h. * emultempl/nds32elf.em: Likewise. * emultempl/ppc64elf.em: Likewise. * emultempl/ppc32elf.em: Likewise. (pagesize): Delete. (params): Update init. (ppc_after_open_output): Use params.pagesize. Don't call bfd_log2. (PARSE_AND_LIST_ARGS_CASES): Use params.pagesize. * emultempl/sh64elf.em: Don't include libbfd.h. (after_allocation): Use ASSERT, not BFD_ASSERT. * emultempl/xtensaelf.em: Don't include libbfd.h. (replace_insn_sec_with_prop_sec): Use xmalloc, not bfd_malloc. * Makefile.am: Update dependencies. * Makefile.in: Regenerate.
2016-04-15Regenerate Makefile.in/aclocal.m4 automake 1.11.6H.J. Lu1-23/+56
bfd/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. binutils/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gas/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gold/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. ld/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. opcodes/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise.
2016-03-31enable -Wwrite-strings for gasTrevor Saunders1-1/+1
We add a new AC_SUBST to warning.m4 so that the test if the warning is supported is centralized, but the warning can be enabled per directory. binutils/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. gprof/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. ld/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. opcodes/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. bfd/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. * warning.m4: Add WARN_WRITE_STRINGS AC_SUBST. gold/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. gas/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * Makefile.am: Add WARN_WRITE_STRINGS to WARN_CFLAGS. * Makefile.in: Regenerate. * configure: Likewise.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-03-31Revert the AM_ZLIB change in gasH.J. Lu1-4/+6
* configure.ac: Revert the AM_ZLIB change. * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure: Likewise.
2015-03-31Add --with-system-zlib in gasH.J. Lu1-2/+7
This patch adds --with-system-zlib and remove --with-zlib in gas. gas/ * Makefile.am (ZLIBINC): New. (AM_CFLAGS): Add $(ZLIBINC). * as.c: (show_usage): Don't check HAVE_ZLIB_H. (parse_args): Likewise. * compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>. (compress_init): Don't check HAVE_ZLIB_H. (compress_data): Likewise. (compress_finish): Likewise. * configure.ac (AM_ZLIB): Removed. (zlibinc): New. AC_SUBST. Add --with-system-zlib. * Makefile.in: Regenerated. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. gas/testsuite/ * gas/i386/dw2-compress-1.d: Expect .zdebug_info.
2015-01-28FT32 initial supportAlan Modra1-0/+17
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-02Regenerate Makeile.in file for copyright updateAlan Modra1-1/+1
2014-12-06Add Visium support to gasEric Botcazou1-12/+29
gas/ * configure.tgt: Add Visium support. * Makefile.am (TARGET_CPU_CFILES): Move config/tc-vax.c around and add config/tc-visium.c. (TARGET_CPU_HFILES): Move config/tc-vax.h around and add config/tc-visium.h. * Makefile.in: Regenerate. * config/tc-visium.c: New file. * config/tc-visium.h: Likewise. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/elf/elf.exp: Skip ifunc-1 for Visium. * gas/visium/: New directory.
2014-08-20Fix typo in f7f2534eAlan Modra1-1/+1
* Makefile.am: Typo fix. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2014-08-19This patch adds support for FreeBSD ARM in gas.Nick Clifton1-0/+2
Before FreeBSD-8 there was/is no arm support from the OS side. FreeBSD-9.x added ARM support but only for the OABI. From FreeBSD-10 upwards there is EABI support. * Makefile.am: Add FreeBSD ARM support. * Mafefile.in: Regenerate. * configure.tgt: Add FreeBSD ARM support. * config/te-armfbsdeabi.h: New file. * config/te-armfbsdvfp.h: Likewise.
2014-07-04Rename configure.in to configure.acAlan Modra1-1/+1
bfd/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. binutils/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.ac: Rename from configure.in. * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * gconfig.in: Regenerate. ld/ * configure.ac: Rename from configure.in. * Makefile.in: Regenerate. * config.in: Regenerate.
2014-07-04Use modern AC_INIT in configure.inAlan Modra1-4/+4
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all binutils configure.in files. The BFD version is now in bfd/version.m4 rather than bfd/configure.in, which allows automake to automatically track this dependency. bfd/ * version.m4: New file. * configure.in: Include version.m4. (AC_INIT): Update. * Makefile.am (RELEASE): Delete. (bfdver.h): Depend on development.sh, use instead of RELEASE. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. opcodes/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. binutils/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gas/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * configure.com: Get bfd version from bfd/version.m4. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. gprof/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate. ld/ * configure.in: Include bfd/version.m4. (AC_INIT, AM_INIT_AUTOMAKE): Use modern form. (BFD_VERSION): Delete. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in. * configure: Regenerate. * Makefile.in: Regenerate.
2014-06-05Make it easy to make --disable-werror the default for both binutils and gdbJoel Brobecker1-1/+4
The goal of this patch is to provide an easy way to make --disable-werror the default when building binutils, or the parts of binutils that need to get built when building GDB. In development mode, we want to continue making -Werror the default with GCC. But, when making releases, I think we want to make it as easy as possible for regular users to successfully build from sources. GDB already has this kind of feature to turn -Werror as well as the use of the libmcheck library. As GDB Release Manager, I take advantage of it to turn those off after having cut the branch. I'd like to be able to do the same for the binutils bits. And perhaps Tristan will want to do the same for his releases too (not sure, binutils builders might be a little savvier than GDB builders). This patch introduces a new file, called development.sh, which just sets a variable called $development. In our development branches (Eg. "master"), it's set to true. But setting it to false would allow us to change the default behavior of various development-related features to be turned off; in this case, it turns off the use of -Werror by default (use --enable-werror to turn it back on). bfd/ChangeLog: * development.sh: New file. * warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh. Make -Werror the default with GCC only if DEVELOPMENT is true. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add $(srcdir)/development.sh. * Makefile.in, configure: Regenerate. binutils/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gas/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gold/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): New. * Makefile.in, configure: Regenerate. gprof/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. ld/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. opcodes/ChangeLog: * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on bfd's development.sh. * Makefile.in, configure: Regenerate. gdb/ChangeLog: * development.sh: Delete. * Makefile.in (config.status): Adjust dependency on development.sh. * configure.ac: Adjust development.sh source call. * configure: Regenerate. gdb/gdbserver/ChangeLog: * configure.ac: Adjust development.sh source call. * Makefile.in (config.status): Adjust dependency on development.sh. * configure: Regenerate. Tested on x86_64-linux by building two ways: One with DEVELOPMENT set to true, and one with DEVELOPMENT set to false. In the first case, I could see the use of -Werror, while it disappeared in the second case.
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-30/+13
with support for the new or1k configuration.
2014-03-12autoreconfAlan Modra1-1/+1
Regenerate Makefile.in in bfd, binutils, gas, gold, gprof, ld, opcodes. Regenerate gas/config.in.
2013-12-13Add support for Andes NDS32:Kuan-Lin Chen1-0/+17
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32.
2013-12-10Use $(INSTALL_PROGRAM_ENV) consistently.Roland McGrath1-6/+6
binutils/ * Makefile.am (install-exec-local): Prefix libtool invocation with $(INSTALL_PROGRAM_ENV). * Makefile.in: Regenerate. gas/ * Makefile.am (install-exec-bindir): Prefix libtool invocation with $(INSTALL_PROGRAM_ENV). (install-exec-tooldir): Likewise. * Makefile.in: Regenerate. gold/ * Makefile.am (install-exec-local): Prefix $(INSTALL_PROGRAM) uses with $(INSTALL_PROGRAM_ENV). * Makefile.in: Regenerate. ld/ * Makefile.am (install-exec-local): Prefix libtool invocation with $(INSTALL_PROGRAM_ENV). * Makefile.in: Regenerate.
2013-06-22 * configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)Richard Sandiford1-17/+0
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier]) (mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs. * configure: Regenerate. gas/ * NEWS: Note removal of ECOFF support. * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF. * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h. (MULTI_CFILES): Remove config/e-mipsecoff.c. * Makefile.in: Regenerate. * configure.in: Remove MIPS ECOFF references. (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff): Delete cases. (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*) (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into... (mips-*-*): ...this single case. (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect MIPS emulations to be e-mipself*. * configure: Regenerate. * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*) (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*) (mips-*-sysv*): Remove coff and ecoff cases. * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove. * ecoff.c: Remove reference to MIPS ECOFF. * config/e-mipsecoff.c, config/te-lnews.h: Delete files. * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete. (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases. (mips_hi_fixup): Tweak comment. (append_insn): Require a howto. (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code. gas/testsuite/ * gas/all/gas.exp: Remove reference to mips-ecoff. * gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d, gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d, gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove skips for mips-*-ecoff. ld/ * NEWS: Document the removal of MIPS ECOFF targets. * ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than MIPS ECOFF as an example of a target that supports small data. * ldmain.c (g_switch_value): Likewise. * configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*) (mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*) (mips*-*-bsd*, mips*-*-lnews*): Remove cases. * Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c. (emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c) (emipslnews.c, emipspe.c): Delete rules. * Makefile.in: Regenerate. * emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh, emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh, emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete. * emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support has now been removed. * emultempl/pe.em: Remove TARGET_IS_mipspe checks.
2013-02-062013-02-06 Sandra Loosemore <sandra@codesourcery.com>Sandra Loosemore1-0/+17
Andrew Jenner <andrew@codesourcery.com> Based on patches from Altera Corporation. bfd/ * Makefile.am (ALL_MACHINES): Add cpu-nios2.lo. (ALL_MACHINES_CFILES): Add cpu-nios2.c. (BFD_BACKENDS): Add elf32-nios2.lo. (BFD32_BACKENDS_CFILES): Add elf32-nios2.c. * Makefile.in: Regenerated. * configure.in: Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * configure: Regenerated. * config.bfd: Add cases for nios2. * archures.c (enum bfd_architecture): Add bfd_arch_nios2. (bfd_mach_nios2): Define. (bfd_nios2_arch): Declare. (bfd_archures_list): Add bfd_nios2_arch. * targets.c (bfd_elf32_bignios2_vec): Declare. (bfd_elf32_littlenios2_vec): Declare. (_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA. * reloc.c (enum bfd_reloc_code_real): Add Nios II relocations. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * cpu-nios2.c: New file. * elf32-nios2.c: New file. opcodes/ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and nios2-opc.c. * Makefile.in: Regenerated. * configure.in: Add case for bfd_nios2_arch. * configure: Regenerated. * disassemble.c (ARCH_nios2): Define. (disassembler): Add case for bfd_arch_nios2. * nios2-dis.c: New file. * nios2-opc.c: New file. include/ * dis-asm.h (print_insn_big_nios2): Declare. (print_insn_little_nios2): Declare. include/elf * nios2.h: New file. include/opcode/ * nios2.h: New file. gas/ * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c. (TARGET_CPU_HFILES): Add config/tc-nios2.h. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-linux*. * config/obj-elf.c: Conditionally include elf/nios2.h. * config/tc-nios2.c: New file. * config/tc-nios2.h: New file. * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set NIOSII. * doc/as.texinfo (Overview): Add Nios II options. (Machine Dependencies): Include c-nios2.texi. * doc/c-nios2.texi: New file. * NEWS: Note Altera Nios II support. gas/testsuite/ * gas/nios2/add.d: New. * gas/nios2/add.s: New. * gas/nios2/align_fill.d: New. * gas/nios2/align_fill.s: New. * gas/nios2/align_text.d: New. * gas/nios2/align_text.s: New. * gas/nios2/and.d: New. * gas/nios2/and.s: New. * gas/nios2/branch.d: New. * gas/nios2/branch.s: New. * gas/nios2/break.d: New. * gas/nios2/break.s: New. * gas/nios2/bret.d: New. * gas/nios2/bret.s: New. * gas/nios2/cache.d: New. * gas/nios2/cache.s: New. * gas/nios2/call26.d: New. * gas/nios2/call26.s: New. * gas/nios2/call.d: New. * gas/nios2/call.s: New. * gas/nios2/cmp.d: New. * gas/nios2/cmp.s: New. * gas/nios2/comments.d: New. * gas/nios2/comments.s: New. * gas/nios2/complex.d: New. * gas/nios2/complex.s: New. * gas/nios2/ctl.d: New. * gas/nios2/ctl.s: New. * gas/nios2/custom.d: New. * gas/nios2/custom.s: New. * gas/nios2/etbt.d: New. * gas/nios2/etbt.s: New. * gas/nios2/flushda.d: New. * gas/nios2/flushda.s: New. * gas/nios2/illegal.l: New. * gas/nios2/illegal.s: New. * gas/nios2/jmp.d: New. * gas/nios2/jmp.s: New. * gas/nios2/ldb.d: New. * gas/nios2/ldb.s: New. * gas/nios2/ldh.d: New. * gas/nios2/ldh.s: New. * gas/nios2/ldw.d: New. * gas/nios2/ldw.s: New. * gas/nios2/lineseparator.d: New. * gas/nios2/lineseparator.s: New. * gas/nios2/mov.d: New. * gas/nios2/movia.d: New. * gas/nios2/movia.s: New. * gas/nios2/movi.d: New. * gas/nios2/movi.s: New. * gas/nios2/mov.s: New. * gas/nios2/mul.d: New. * gas/nios2/mul.s: New. * gas/nios2/nios2.exp: New. * gas/nios2/nor.d: New. * gas/nios2/nor.s: New. * gas/nios2/or.d: New. * gas/nios2/or.s: New. * gas/nios2/ret.d: New. * gas/nios2/ret.s: New. * gas/nios2/rol.d: New. * gas/nios2/rol.s: New. * gas/nios2/rotate.d: New. * gas/nios2/rotate.s: New. * gas/nios2/stb.d: New. * gas/nios2/stb.s: New. * gas/nios2/sth.d: New. * gas/nios2/sth.s: New. * gas/nios2/stw.d: New. * gas/nios2/stw.s: New. * gas/nios2/sub.d: New. * gas/nios2/sub.s: New. * gas/nios2/sync.d: New. * gas/nios2/sync.s: New. * gas/nios2/trap.d: New. * gas/nios2/trap.s: New. * gas/nios2/tret.d: New. * gas/nios2/tret.s: New. * gas/nios2/warn_noat.l: New. * gas/nios2/warn_noat.s: New. * gas/nios2/warn_nobreak.l: New. * gas/nios2/warn_nobreak.s: New. * gas/nios2/xor.d: New. * gas/nios2/xor.s: New. ld/ * Makefile.am (enios2elf.c): New rule. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-*-*. * emulparams/nios2elf.sh: New file. * NEWS: Note Altera Nios II support. ld/testsuite/ * ld-nios2/emit-relocs-1a.s: New. * ld-nios2/emit-relocs-1b.s: New. * ld-nios2/emit-relocs-1.d: New. * ld-nios2/emit-relocs-1.ld: New. * ld-nios2/gprel.d: New. * ld-nios2/gprel.s: New. * ld-nios2/hilo16.d: New. * ld-nios2/hilo16.s: New. * ld-nios2/hilo16_symbol.s: New. * ld-nios2/imm5.d: New. * ld-nios2/imm5.s: New. * ld-nios2/imm5_symbol.s: New. * ld-nios2/nios2.exp: New. * ld-nios2/pcrel16.d: New. * ld-nios2/pcrel16_label.s: New. * ld-nios2/pcrel16.s: New. * ld-nios2/relax_callr.d: New. * ld-nios2/relax_callr.ld: New. * ld-nios2/relax_callr.s: New. * ld-nios2/relax_cjmp.d: New. * ld-nios2/relax_cjmp.s: New. * ld-nios2/relax_jmp.ld: New. * ld-nios2/relax_section.d: New. * ld-nios2/relax_section.s: New. * ld-nios2/relax_ujmp.d: New. * ld-nios2/relax_ujmp.s: New. * ld-nios2/reloc.d: New. * ld-nios2/reloc.s: New. * ld-nios2/reloc_symbol.s: New. * ld-nios2/s16.d: New. * ld-nios2/s16.s: New. * ld-nios2/s16_symbol.s: New. * ld-nios2/u16.d: New. * ld-nios2/u16.s: New. * ld-nios2/u16_symbol.s: New. * ld-elf/indirect.exp: Skip on targets that don't support -shared -fPIC. * ld-elfcomm/elfcomm.exp: Build with -G0 for nios2. * ld-plugin/lto.exp: Skip shared library tests on targets that don't support them. Skip execution tests on non-native targets. binutils/ * readelf.c: Include elf/nios2.h. (dump_relocations): Add case for EM_ALTERA_NIOS2. (get_nios2_dynamic_type): New. (get_dynamic_type): Add case for EM_ALTERA_NIOS2. (is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases. * NEWS: Note Altera Nios II support. * MAINTAINERS: Add Nios II maintainers.
2013-01-10 * common.h: Fix case of "Meta".Nick Clifton1-0/+17
* metag.h: New file. * dis-asm.h (print_insn_metag): New declaration. * metag.h: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * configure: Regenerate. * configure.in: Add Meta. * disassemble.c: Add Meta support. * metag-dis.c: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * archures.c (bfd_mach_metag): New. * bfd-in2.h: Regenerate. * config.bfd: Add Meta. * configure: Regenerate. * configure.in: Add Meta. * cpu-metag.c: New file. * elf-bfd.h: Add Meta. * elf32-metag.c: New file. * elf32-metag.h: New file. * libbfd.h: Regenerate. * reloc.c: Add Meta relocations. * targets.c: Add Meta. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * config/tc-metag.c: New file. * config/tc-metag.h: New file. * configure.tgt: Add Meta. * doc/Makefile.am: Add Meta. * doc/Makefile.in: Regenerate. * doc/all.texi: Add Meta. * doc/as.texiinfo: Document Meta options. * doc/c-metag.texi: New file. * gas/metag/labelarithmetic.d: New file. * gas/metag/labelarithmetic.s: New file. * gas/metag/metacore12.d: New file. * gas/metag/metacore12.s: New file. * gas/metag/metacore21-invalid.l: New file. * gas/metag/metacore21-invalid.s: New file. * gas/metag/metacore21.d: New file. * gas/metag/metacore21.s: New file. * gas/metag/metacore21ext.d: New file. * gas/metag/metacore21ext.s: New file. * gas/metag/metadsp21-invalid.l: New file. * gas/metag/metadsp21-invalid.s: New file. * gas/metag/metadsp21.d: New file. * gas/metag/metadsp21.s: New file. * gas/metag/metadsp21ext.d: New file. * gas/metag/metadsp21ext.s: New file. * gas/metag/metafpu21.d: New file. * gas/metag/metafpu21.s: New file. * gas/metag/metafpu21ext.d: New file. * gas/metag/metafpu21ext.s: New file. * gas/metag/metag.exp: New file. * gas/metag/tls.d: New file. * gas/metag/tls.s: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * configure.tgt: Add Meta. * emulparams/elf32metag.sh: New file. * emultempl/metagelf.em: New file. * ld-elf/merge.d: Mark Meta as xfail. * ld-gc/start.d: Skip this test on Meta. * ld-gc/personality.d: Skip this test on Meta. * ld-metag/external.s: New file. * ld-metag/metag.exp: New file. * ld-metag/pcrel.d: New file. * ld-metag/pcrel.s: New file. * ld-metag/shared.d: New file. * ld-metag/shared.r: New file. * ld-metag/shared.s: New file. * ld-metag/stub.d: New file. * ld-metag/stub.s: New file. * ld-metag/stub_pic_app.d: New file. * ld-metag/stub_pic_app.r: New file. * ld-metag/stub_pic_app.s: New file. * ld-metag/stub_pic_shared.d: New file. * ld-metag/stub_pic_shared.s: New file. * ld-metag/stub_shared.d: New file. * ld-metag/stub_shared.r: New file. * ld-metag/stub_shared.s: New file. * binutils/readelf.c: (guess_is_rela): Add EM_METAG. (dump_relocations): Add EM_METAG. (get_machine_name): Correct case for Meta. (is_32bit_abs_reloc): Add support for Meta ADDR32 reloc. (is_none_reloc): Add support for Meta NONE reloc.
2012-12-17Add copyright noticesNick Clifton1-0/+18
2012-09-11 * Makefile.am (bootstrap): Add $EXEEXT to dependency.Alan Modra1-1/+1
* Makefile.in: Regenerate.
2012-08-13Add support for 64-bit ARM architecture: AArch64Nick Clifton1-0/+17
2012-05-17bfd/Andreas Schwab1-7/+6
* aclocal.m4: Regenerate. * Makefile.in: Regenerate. binutils/ * aclocal.m4: Regenerate. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate. gas/ * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate.
2012-05-17 PR 14072Nick Clifton1-15/+16
* configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.
2012-05-08 * Makefile.am (check_DEJAGNU): Export LC_ALL=C in place of otherAlan Modra1-1/+1
LC and LANG environment vars. * Makefile.in: Regenerate.
2012-05-07 * Makefile.am (check-DEJAGNU): Clear LC_COLLATE, LC_ALL and LANG.Alan Modra1-0/+1
* Makefile.in: Regenerate.
2012-05-03Add support for Motorola XGATE embedded CPUNick Clifton1-0/+18
2011-11-02[.]DJ Delorie1-0/+26
* configure.ac (rl78-*-*) New case. * configure: Regenerate. [bfd] * Makefile.am (ALL_MACHINES): Add cpu-rl78.lo. (ALL_MACHINES_CFILES): Add cpu-rl78.c. (BFD32_BACKENDS): Add elf32-rl78.lo. (BFD32_BACKENDS_CFILES): Add elf32-rl78.c. (Makefile.in): Regenerate. * archures.c (bfd_architecture): Define bfd_arch_rl78. (bfd_archures_list): Add bfd_rl78_arch. * config.bfd: Add rl78-*-elf. * configure.in: Add bfd_elf32_rl78_vec. * reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations. * targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rl78.c: New file. * elf32-rl78.c: New file. [binutils] * readelf.c: Include elf/rl78.h (guess_is_rela): Handle EM_RL78. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. * NEWS: Mention addition of RL78 support. * MAINTAINERS: Add myself as RL78 port maintainer. [gas] * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. (TARGET_CPU_HFILES): Add rc-rl78.h. (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. * Makefile.in: Regenerate. * configure.in: Add rl78 case. * configure: Regenerate. * configure.tgt: Add rl78 case. * config/rl78-defs.h: New file. * config/rl78-parse.y: New file. * config/tc-rl78.c: New file. * config/tc-rl78.h: New file. * NEWS: Add Renesas RL78. * doc/Makefile.am (c-rl78.texi): New. * doc/Makefile.in: Likewise. * doc/all.texi: Enable it. * doc/as.texi: Add it. [include] * dis-asm.h (print_insn_rl78): Declare. [include/elf] * common.h (EM_RL78, EM_78K0R): New. * rl78.h: New. [include/opcode] * rl78.h: New file. [ld] * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c. (+eelf32rl78.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Add rl78-*-* case. * emulparams/elf32rl78.sh: New file. * NEWS: Mention addition of Renesas RL78 support. [opcodes] * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and rl78-dis.c. (MAINTAINERCLEANFILES): Add rl78-decode.c. (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c. * Makefile.in: Regenerate. * configure.in: Add bfd_rl78_arch case. * configure: Regenerate. * disassemble.c: Define ARCH_rl78. (disassembler): Add ARCH_rl78 case. * rl78-decode.c: New file. * rl78-decode.opc: New file. * rl78-dis.c: New file.
2011-10-25bfd:Nick Clifton1-0/+17
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo . (ALL_MACHINES_CFILES): Add cpu-epiphany.c . (BFD32_BACKENDS): Add elf32-epiphany.lo . (BFD32_BACKENDS_CFILES): Add elf32-epiphany.c . * Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate. * archures.c (bfd_arch_epiphany): Add. (bfd_mach_epiphany16, bfd_mach_epiphany32): Define. (bfd_epiphany_arch): Declare. (bfd_archures_list): Add &bfd_epiphany_arch. * config.bfd (epiphany-*-elf): New target case. * configure.in (bfd_elf32_epiphany_vec): New target vector case. * reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation. (BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise. (BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise. (BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise. * targets.c (bfd_elf32_epiphany_vec): Declare. (_bfd_target_vector): Add bfd_elf32_epiphany_vec. * po/SRC-POTFILES.in, po/bfd.pot: Regenerate. * cpu-epiphany.c, elf32-epiphany.c: New files. binutils: * readelf.c (include "elf/epiphany.h") (guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY. (get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise. (is_16bit_abs_reloc, is_none_reloc): Likewise. * po/binutils.pot: Regenerate. cpu: * cpu/epiphany.cpu, cpu/epiphany.opc: New files. gas: * NEWS: Mention addition of Adapteva Epiphany support. * config/tc-epiphany.c, config/tc-epiphany.h: New files. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . (TARGET_CPU_HFILES): Add config/tc-epiphany.h . * Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate. * configure.in: Also set using_cgen for epiphany. * configure.tgt: Handle epiphany. * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . * doc/all.texi: Set EPIPHANY. * doc/as.texinfo: Add EPIPHANY-specific text. * doc/c-epiphany.texi: New file. * po/gas.pot: Regenerate. gas/testsuite: * gas/epiphany: New directory. include: * dis-asm.h (print_insn_epiphany): Declare. * elf/epiphany.h: New file. * elf/common.h (EM_ADAPTEVA_EPIPHANY): Define. ld: * NEWS: Mention addition of Adapteva Epiphany support. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c . (eelf32epiphany.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Handle epiphany-*-elf. * po/ld.pot: Regenerate. * testsuite/ld-srec/srec.exp: xfail epiphany. * emulparams/elf32epiphany.sh: New file. opcodes: * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h . (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c, epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c . (CLEANFILES): Add stamp-epiphany. (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it. (stamp-epiphany): New rule. * Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate. * configure.in: Handle bfd_epiphany_arch. * disassemble.c (ARCH_epiphany): Define. (disassembler): Handle bfd_arch_epiphany. * epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files. * epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise. * epiphany-opc.h: Likewise.
2011-06-13 * Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.Nick Clifton1-0/+34
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c. (BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo, and elfxx-tilegx.lo. (BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and elfxx-tilegx.c. (BFD64_BACKENDS): Add elf64-tilegx.lo. (BFD64_BACKENDS_CFILES): Add elf64-tilegx.c. * Makefile.in: Regenerate. * arctures.c (bfd_architecture): Define bfd_arch_tilepro, bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx. (bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch. (bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch. bfd-in2.h: Regenerate. * config.bfd: Handle tilegx-*-* and tilepro-*-*. * configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * configure: Regenerate. * elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and TILEPRO_ELF_DATA. * libbfd.h: Regenerate. * reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1, IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI, IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL, IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL, IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL, IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO, IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI, IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0, MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO, IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI, IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE, IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO, IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA, IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST, HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1, JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0, IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2, IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST, IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST, IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL, IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL, IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL, IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL, IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL, IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL, IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT, IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT, IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT, IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT, IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT, IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD, IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD, IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD, IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD, IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD, IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD, IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE, IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE, IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE, IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE, IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE, IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE, IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32} * targets.c (bfd_elf32_tilegx_vec): Declare. (bfd_elf32_tilepro_vec): Declare. (bfd_elf64_tilegx_vec): Declare. (bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec, and bfd_elf64_tilegx_vec. * cpu-tilegx.c: New file. * cpu-tilepro.c: New file. * elf32-tilepro.h: New file. * elf32-tilepro.c: New file. * elf32-tilegx.c: New file. * elf32-tilegx.h: New file. * elf64-tilegx.c: New file. * elf64-tilegx.h: New file. * elfxx-tilegx.c: New file. * elfxx-tilegx.h: New file. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and config/tc-tilepro.c. (TARGET_CPU_HFILES): Add config/tc-tilegx.h and config/tc-tilepro.h. * Makefile.in: Regenerate. * configure.tgt (tilepro-*-*): New. (tilegx-*-*): Likewise. * config/tc-tilegx.c: New file. * config/tc-tilegx.h: Likewise. * config/tc-tilepro.h: Likewise. * config/tc-tilepro.c: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and c-tilepro.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TILEGX): Define. (TILEPRO): Define. * doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include c-tilegx.texi and c-tilepro.texi. * doc/c-tilegx.texi: New. * doc/c-tilepro.texi: New. * gas/tilepro/t_constants.s: New file. * gas/tilepro/t_constants.d: Likewise. * gas/tilepro/t_insns.s: Likewise. * gas/tilepro/tilepro.exp: Likewise. * gas/tilepro/t_insns.d: Likewise. * gas/tilegx/tilegx.exp: Likewise. * gas/tilegx/t_insns.d: Likewise. * gas/tilegx/t_insns.s: Likewise. * dis-asm.h (print_insn_tilegx): Declare. (print_insn_tilepro): Likewise. * tilegx.h: New file. * tilepro.h: New file. * common.h: Add EM_TILEGX. * tilegx.h: New file. * tilepro.h: New file. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and eelf32tilepro.c. (ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c. (eelf32tilegx.c): New target. (eelf32tilepro.c): Likewise. (eelf64tilegx.c): Likewise. * Makefile.in: Regenerate. * configure.tgt: Handle tilegx-*-* and tilepro-*-*. * emulparams/elf32tilegx.sh: New file. * emulparams/elf64tilegx.sh: New file. * emulparams/elf32tilepro.sh: New file. * ld-elf/eh5.d: Don't run on tile*. * ld-srec/srec.exp: xfail on tile*. * ld-tilegx/external.s: New file. * ld-tilegx/reloc.d: New file. * ld-tilegx/reloc.s: New file. * ld-tilegx/tilegx.exp: New file. * ld-tilepro/external.s: New file. * ld-tilepro/reloc.d: New file. * ld-tilepro/reloc.s: New file. * ld-tilepro/tilepro.exp: New file. * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c, tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c. * Makefile.in: Regenerate. * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch. * configure: Regenerate. * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro. * po/POTFILES.in: Regenerate. * tilegx-dis.c: New file. * tilegx-opc.c: New file. * tilepro-dis.c: New file. * tilepro-opc.c: New file.
2010-07-04Remove CONFIG_OBJS, GENERIC_OBJS and OBJS.H.J. Lu1-38/+0
2010-07-04 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (CONFIG_OBJS): Removed. (GENERIC_OBJS): Likewise. (OBJS): Likewise. * Makefile.in: Regenerated.
2010-07-03bfd/ChangeLog:Cary Coutant1-8/+11
* compress.c (bfd_uncompress_section_contents): Add ATTRIBUTE_UNUSED. * dwarf2.c (read_and_uncompress_section): New function. (read_section): Call it. (find_line): Likewise. binutils/ChangeLog: * objdump.c (load_specific_debug_section): Decompress section contents before applying relocations. * readelf.c (load_specific_debug_section): Update section size after decompression. gas/ChangeLog: * Makefile.am: Add compress-debug.c and compress-debug.h. * Makefile.in: Regenerate. * config.in: Add HAVE_ZLIB_H. * configure.in: Check for zlib.h. * configure: Regenerate. * as.c (parse_args): Add --compress-debug-sections and --nocompress-debug-sections. * as.h (flag_compress_debug): New variable. * compress-debug.c: New file. * compress-debug.h: New file. * write.c: Include compress-debug.h. (compress_frag): New function. (compress_debug): New function. (write_object_file): Compress debug sections if requested.
2010-06-29remove maxq-coff portAlan Modra1-17/+0
2010-05-25Fix typo.Nick Clifton1-1/+1
2010-05-25 PR ld/11621Nick Clifton1-48/+49
* Makefile.am: Replace all occurences of .o with .@OBJEXT@ * Makefile.in: Regenerate.
2010-05-07bfd/Tristan Gingold1-3/+3
2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. bfd/doc/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. binutils/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. * doc/Makefile.in: Ditto. gas/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. * doc/Makefile.in: Ditto. gprof/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. ld/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. opcodes/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto.
2010-03-25bfd:Joseph Myers1-0/+17
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo. (ALL_MACHINES_CFILES): Add cpu-tic6x.c. (BFD32_BACKENDS): Add elf32-tic6x.lo. (BFD32_BACKENDS_CFILES): Add elf32-tic6x.c. * Makefile.in: Regenerate. * archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New. (bfd_archures_list): Update. * config.bfd (tic6x-*-elf): New. * configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New. * configure: Regenerate. * cpu-tic6x.c, elf32-tic6x.c: New. * reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12, BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7, BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16, BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B, BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W, BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B, BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W, BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H, BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W, BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W, BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31, BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN, BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New. * targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New. (_bfd_target_vector): Update. * bfd-in2.h, libbfd.h: Regenerate. binutils: * MAINTAINERS: Add self as TI C6X maintainer. * NEWS: Add news entry for TI C6X support. * readelf.c: Include elf/tic6x.h. (guess_is_rela): Handle EM_TI_C6000. (dump_relocations): Likewise. (get_tic6x_dynamic_type): New. (get_dynamic_type): Call it. (get_machine_flags): Handle EF_C6000_REL. (get_osabi_name): Handle machine-specific values only for relevant machines. Handle C6X values. (get_tic6x_segment_type): New. (get_segment_type): Call it. (get_tic6x_section_type_name): New. (get_section_type_name): Call it. (is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle EM_TI_C6000. gas: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c. (TARGET_CPU_HFILES): Add config/tc-tic6x.h. * Makefile.in: Regenerate. * NEWS: Add news entry for TI C6X support. * app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in operands if TC_KEEP_OPERAND_SPACES. * configure.tgt (tic6x-*-*): New. * config/tc-ia64.h (TC_PREDICATE_START_CHAR, TC_PREDICATE_END_CHAR): Define. * config/tc-tic6x.c, config/tc-tic6x.h: New. * doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TIC6X): Define. * doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi. * doc/c-tic6x.texi: New. gas/testsuite: * gas/tic6x: New directory and testcases. include: * dis-asm.h (print_insn_tic6x): Declare. include/elf: * common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define. * tic6x.h: New. include/opcode: * tic6x-control-registers.h, tic6x-insn-formats.h, tic6x-opcode-table.h, tic6x.h: New. ld: * Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and eelf32_tic6x_le.o. (eelf32_tic6x_be.c, eelf32_tic6x_le.c): New. * NEWS: Add news entry for TI C6X support. * configure.tgt (tic6x-*-*): New. * emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New. ld/testsuite: * ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*. * ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*. * ld-tic6x: New directory and testcases. opcodes: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c. * Makefile.in: Regenerate. * configure.in (bfd_tic6x_arch): New. * configure: Regenerate. * disassemble.c (ARCH_tic6x): Define if ARCH_all. (disassembler): Handle TI C6X. * tic6x-dis.c: New.
2010-02-05 * Makefile.am (CPU_TYPES, OBJ_FORMATS, CPU_OBJ_VALID,Joseph Myers1-136/+0
MULTI_CPU_TYPES, MULTI_CPU_OBJ_VALID): Remove. * Makefile.in: Regenerate.
2010-01-09Sync Libtool from GCC.Ralf Wildenhues1-1/+0
/: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.
2009-12-11Add -Wshadow to the gcc command line options used when compiling the binutils.Nick Clifton1-0/+3
Fix up all warnings generated by the addition of this switch.
2009-09-29bfdNick Clifton1-1/+29
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo. (ALL_MACHINES_CFILES): Add cpu-rx.c. (BFD32_BACKENDS): Add elf32-rx.lo. (BFD32_BACKENDS_CFILES): Add elf32-rx.c. * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx. Export bfd_rx_arch. (bfd_archures_list): Add bfd_rx_arch. * config.bfd: Add entry for rx-*-elf. * configure.in: Add entries for bfd_elf32_rx_le_vec and bfd_elf32_rx_be_vec. * reloc.c: Add RX relocations. * targets.c: Add RX target vectors. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rx.c: New file. * elf32-rx.c: New file. binutils * readelf.c: Add support for RX target. * MAINTAINERS: Add DJ and NickC as maintainers for RX. gas * Makefile.am: Add RX target. * configure.in: Likewise. * configure.tgt: Likewise. * read.c (do_repeat_with_expander): New function. * read.h: Provide a prototype for do_repeat_with_expander. * doc/Makefile.am: Add RX target documentation. * doc/all.texi: Likewise. * doc/as.texinfo: Likewise. * Makefile.in: Regenerate. * NEWS: Mention support for RX architecture. * configure: Regenerate. * doc/Makefile.in: Regenerate. * config/rx-defs.h: New file. * config/rx-parse.y: New file. * config/tc-rx.h: New file. * config/tc-rx.c: New file. * doc/c-rx.texi: New file. gas/testsuite * gas/rx: New directory. * gas/rx/*: New set of test cases. * gas/elf/section2.e-rx: New expected output file. * gas/all/gas.exp: Add support for RX target. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Likewise. * gas/macros/macros.exp: Likewise. include * dis-asm.h: Add prototype for print_insn_rx. include/elf * rx.h: New file. include/opcode * rx.h: New file. ld * Makefile.am: Add rules to build RX emulation. * configure.tgt: Likewise. * NEWS: Mention support for RX architecture. * Makefile.in: Regenerate. * emulparams/elf32rx.sh: New file. * emultempl/rxelf.em: New file. opcodes * Makefile.am: Add RX files. * configure.in: Add support for RX target. * disassemble.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * opc2c.c: New file. * rx-decode.c: New file. * rx-decode.opc: New file. * rx-dis.c: New file.
2009-09-07bfd/:Tristan Gingold1-3/+22
2009-09-07 Tristan Gingold <gingold@adacore.com> * bfd.m4 (BFD_HAVE_TIME_TYPE_MEMBER, BFD_HAVE_SYS_STAT_TYPE_MEMBER): Moved to gas/acinclude.m4 * configure.in: Move tests for tm_gmtoff, st_mtim.tv_sec and st_mtim.tv_nsec to gas/configure.in (bfd_elf64_ia64_vms_vec): Remove vmsutil.lo * configure: Regenerate. * config.in: Regenerate. * vmsutil.c: Moved to gas/config/te-vms.c * vmsutil.h: Removed. * Makefile.am (BFD32_BACKENDS_CFILES): Remove vmsutil.c (BFD32_BACKENDS): Remove vmsutil.lo * Makefile.in: Regenerate. gas/: 2009-09-07 Tristan Gingold <gingold@adacore.com> * Makefile.am (TARG_ENV_CFILES): New variable. Set to te-vms.c (POTFILES): Add $(TARG_ENV_CFILES) in definition. (EXTRA_as_new_SOURCES): Ditto. * Makefile: Regenerate. * acinclude.m4 (BFD_HAVE_TIME_TYPE_MEMBER, BFD_HAVE_SYS_STAT_TYPE_MEMBER): New macro created from bfd/bfd.m4. * configure.in: Add Tests for tm_gmtoff, st_mtim.tv_sec and st_mtim.tv_nsec (from bfd/configure.in). Check for time.h and sys/stat.h headers. Add te-vms.o in extra_objects if te_file is vms. * configure: Regenerate. * config.in: Regenerate. * config/te-vms.c: New file, from bfd/vmsutil.c (vms_dwarf2_file_time_name, vms_dwarf2_file_size_name) (vms_dwarf2_file_name): New functions. (vms_file_stats_name): Make it static, add a dirname parameter to locally create the full pathname. * config/te-vms.h: Add a copyright header. Declare the above functions. (DWARF2_FILE_TIME_NAME, DWARF2_FILE_SIZE_NAME, DWARF2_FILE_NAME): Use the above functions in the definition. * makefile.vms (OBJS): Add te-vms.obj. (te-vms.obj): Create a specific target. * configure.com: Create targ-env.h using a per target value. Compile te-vms.c for ia64.
2009-09-04 * Makefile.am (bfin-parse.o): Remove bfin-parse.h fromJie Zhang1-4/+5
the prerequisite. Add $(srcdir)/config/bfin-aux.h to the prerequisite. (bfin-defs.h, $(srcdir)/config/bfin-defs.h): Rename to ... (bfin-parse.h, $(srcdir)/config/bfin-parse.h): ... these. (bfin-lex.o): Add bfin-parse.h and $(srcdir)/config/bfin-defs.h to the prerequisite. * Makefile.in: Regenerate.
2009-09-03Fix itbl-parse.h dependencies in gas.Ralf Wildenhues1-3/+7
gas/: * Makefile.am (itbl-lex.o): Depend on itbl-parse.h. (itbl-ops.o, itbl-tops.o): Likewise. (itbl-parse.h): Use separate rule. * Makefile.in: Regenerate.
2009-09-01Fix VPATH search for generated sources in binutils, gas, ld.Ralf Wildenhues1-8/+8
binutils/: * Makefile.am (arparse.o, arlex.o, sysroff.o, defparse.o) (deflex.o, nlmheaders.o, rcparse.o, mcparse.o): Supply correct source file name for generated files which may be in $(srcdir). * Makefile.in: Regenerate. gas/: * Makefile.am (m68k-parse.o, bfin-lex.o, itbl-lex.o, itbl-parse.o): Supply correct source file name for generated files which may be in $(srcdir). * Makefile.in: Regenerate. ld/: * Makefile.am (ldgram.o, ldlex.o, deffilep.o): Supply correct source file name for generated files which may be in $(srcdir). * Makefile.in: Regenerate.
2009-08-26moxie fixes in gas.Ralf Wildenhues1-0/+16
gas/: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-moxie.c. * config/tc-moxie.c (md_assemble): Fix typos in strings. Fix syntax error. * Makefile.in: Regenerate. * po/POTFILES.in: Likewise. * po/gas.pot: Likewise.
2009-08-24Fix yacc and lex reruns with maintainer-mode off.Ralf Wildenhues1-0/+5
gas/: * Makefile.am (am__skiplex, am__skipyacc): New. * Makefile.in: Regenerate. ld/: * Makefile.am (am__skiplex, am__skipyacc): New. * Makefile.in: Regenerate. binutils/: * Makefile.am (am__skiplex, am__skipyacc): New. * Makefile.in: Regenerate. gold/: * Makefile.am (am__skiplex, am__skipyacc): New. * Makefile.in: Regenerate.
2009-08-22Cleanups in binutils makefiles.Ralf Wildenhues1-5/+2
ld/: * Makefile.am (bin_PROGRAMS): Renamed from ... (noinst_PROGRAMS): ... this. (transform): Override, including the renaming of ld-new to ld. (install-exec-local): Installation of ld in $(bindir) not needed here any more. (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. (MAINTAINERCLEANFILES): Add ld.1. * Makefile.in: Regenerate. gold/: * Makefile.am (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. * testsuite/Makefile.am (AUTOMAKE_OPTIONS): Add -Wno-portability. (AM_CPPFLAGS): Renamed from ... (INCLUDE): ... this. * Makefile.in, testsuite/Makefile.in: Regenerate. bfd/: * Makefile.am (libbfd_la_LDFLAGS): Initialize early, to allow appending. [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES, bfdinclude_HEADERS): Set only in this condition. [!INSTALL_LIBBFD] (noinst_LTLIBRARIES, libbfd_la_LDFLAGS): New, to build but not install libbfd.la in this condition. (install-bfdlibLTLIBRARIES, uninstall-bfdlibLTLIBRARIES) (install_libbfd, install_libbfd): Remove. * Makefile.in: Regenerate. binutils/: * Makefile.am (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. (bin2c$(EXEEXT_FOR_BUILD): Adjust rule. (installcheck-local): Renamed from ... (installcheck): ... this. * Makefile.in: Regenerate. gas/: * Makefile.am (YFLAGS): Remove, not needed any more. (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. * Makefile.in: Regenerate. gprof/: * Makefile.am (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. * Makefile.in: Regenerate. opcodes/: * Makefile.am (libopcodes_la_LDFLAGS): Initialize early. [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition. [INSTALL_LIBBFD] (bfdinclude_DATA): New. [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New. [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la is built shared even if it is not to be installed. (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES) (install_libopcodes, uninstall_libopcodes): Remove. (AM_CPPFLAGS): Renamed from ... (INCLUDES): ... this. * Makefile.in: Regenerate.
generated by cgit v1.1 at 2024-11-20 08:44:07 +0000