Age | Commit message (Collapse) | Author | Files | Lines |
|
PR gas/9966
* listing.c (listing_newline): Properly handle `\\"' and ';'.
* read.c (is_end_of_line): Update comments for line separator.
(read_begin): Set line separator in is_end_of_line to 2.
|
|
us '--64' make sure max_architecture is at least V9.
|
|
gas/
* config/tc-arm.c (md_apply_fix): Check BFD_RELOC_ARM_IMMEDIATE and
BFD_RELOC_ARM_ADRL_IMMEDIATE value is in the correct section.
Check BFD_RELOC_ARM_ADRL_IMMEDIATE has a defined symbol.
gas/testsuites/
* gas/arm/adr-invalid.d: New file.
* gas/arm/adr-invalid.l: New file.
* gas/arm/adr-invalid.s: New file.
|
|
* alloca-conf.h: Revise based on autoconf-2.61, autoconf-2.13
documentation.
bfd/
* elf32-m68hc1x.c: Include alloca-conf.h.
* xsym.c: Likewise.
* elf64-hppa.c: Likewise. Remove existing #if's handling alloca.
* som.c: Likewise.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
binutils/
* sysdep.h: Include alloca-conf.h instead of config.h and remove
existing #if's handling alloca.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
gas/
* as.h: Include alloca-conf.h instead of config.h and remove
existing #if's handling alloca.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
opcodes/
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* openrisc-opc.c: Regenerate.
ld/
* ld.h: Remove alloca handling.
|
|
* internal.h (C_AIX_WEAKEXT): New macro.
(C_WEAKEXT): Use the GNU definition in the generic part of the file,
and conditionally reset it to C_AIX_WEAKEXT in the XCOFF part of
the file.
(CSECT_SYM_P): New macro.
* xcoff.h (L_WEAK): Define.
(EXTERN_SYM_P): New macro.
bfd/
* coffcode.h (coff_pointerize_aux_hook): Update CSECT_SYM_P to
check whether a symbol has csect information.
(coff_print_aux): Likewise.
* coff-rs6000.c (_bfd_xcoff_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff_swap_aux_out): Likewise.
(xcoff_reloc_type_br): Handle defweak symbols too.
* coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff64_swap_aux_out): Likewise.
(xcoff64_reloc_type_br): Handle defweak symbols too.
* coffgen.c (coff_print_symbol): Handle auxillary function
information for C_AIX_WEAKEXT too.
* xcofflink.c (_bfd_xcoff_canonicalize_dynamic_symtab): Set BSF_WEAK
instead of BSF_GLOBAL if the L_WEAK flag is set.
(xcoff_dynamic_definition_p): New function.
(xcoff_link_add_dynamic_symbols): Use it to decide whether ldsym
defines h. Don't change h if ldsym isn't the definition. Otherwise,
always take the symbol class from the ldsym. Use weak bfd symbol
types for weak ldsyms.
(xcoff_link_add_symbols): Use CSECT_SYM_P and EXTERN_SYM_P.
Fix the check for whether a definition is from a shared object.
Allow redefinitions of weak symbols.
(xcoff_link_check_ar_symbols): Use EXTERN_SYM_P.
(xcoff_keep_symbol_p): Likewise.
(bfd_xcoff_size_dynamic_sections): Use CSECT_SYM_P.
(xcoff_link_input_bfd): Use CSECT_SYM_P and EXTERN_SYM_P.
Add .loader entries for C_AIX_WEAKEXT as well as C_EXT symbols,
but mark them as L_WEAK.
(xcoff_write_global_symbol): Treat weak symbols as C_AIX_WEAKEXT
instead of C_EXT if C_AIX_WEAKEXT == C_WEAKEXT.
gas/
* config/tc-ppc.c (ppc_frob_symbol): Add csect information for
C_AIX_WEAKEXT too.
ld/testsuite/
* ld-powerpc/aix-glink-2a.s, ld-powerpc/aix-glink-2a.ex,
ld-powerpc/aix-glink-2b.s, ld-powerpc/aix-glink-2c.s,
ld-powerpc/aix-glink-2c.ex, ld-powerpc/aix-glink-2d.s,
ld-powerpc/aix-glink-2-32.dd, ld-powerpc/aix-glink-2-64.dd,
ld-powerpc/aix-weak-1a.s, ld-powerpc/aix-weak-1b.s,
ld-powerpc/aix-weak-1-rel.hd, ld-powerpc/aix-weak-1-rel.nd,
ld-powerpc/aix-weak-1-dso.hd, ld-powerpc/aix-weak-1-dso.nd,
ld-powerpc/aix-weak-1-dso.dnd, ld-powerpc/aix-weak-1.ex,
ld-powerpc/aix-weak-2a.s, ld-powerpc/aix-weak-2a.ex,
ld-powerpc/aix-weak-2a.nd, ld-powerpc/aix-weak-2b.s,
ld-powerpc/aix-weak-2b.nd, ld-powerpc/aix-weak-2c.s,
ld-powerpc/aix-weak-2c.ex, ld-powerpc/aix-weak-2c.nd,
ld-powerpc/aix-weak-2c.od, ld-powerpc/aix-weak-3a.s,
ld-powerpc/aix-weak-3a.ex, ld-powerpc/aix-weak-3b.s,
ld-powerpc/aix-weak-3b.ex, ld-powerpc/aix-weak-3-32.d,
ld-powerpc/aix-weak-3-32.dd, ld-powerpc/aix-weak-3-64.d,
ld-powerpc/aix-weak-3-64.dd: New tests.
* ld-powerpc/aix52.exp: Run them. Replace tmp/aix-* with
tmp/aix64-* in 64-bit ld options.
|
|
* config/tc-ppc.c (md_apply_fix): On COFF targets, always reread
"value" from fx_offset. Manually resubtract md_pcrel_from_section
where necessary.
gas/testsuite/
* gas/ppc/xcoff-branch-1.s, gas/ppc/xcoff-branch-1-32.d,
gas/ppc/xcoff-branch-1-64.d: New tests.
* gas/ppc/aix.exp: Run them.
|
|
* config.bfd: Treat AIX 6+ in the same way as AIX 5.
* configure.in: Likewise.
* configure: Regenerate.
binutils/
* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
* configure.in: Likewise.
* configure: Regenerate.
gas/
* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
* configure.in: Likewise.
* configure: Regenerate.
ld/
* configure.tgt: Extend AIX 5 behavior to AIX 6 and above.
|
|
Rename, changing all callers, to...
(md_create_short_jump): Adjust head comment. Assert
word-sized-branch distance for v32. Bail out calling as_fatal for
compatibility mode here.
(md_create_long_jump): ...not here.
* config/tc-cris.h (md_create_short_jump): Do not define.
|
|
the jump table for multiple overflowing entries with the same
target, handle base symbols being different.
(relax_segment) <case rs_broken_word, second loop>: Whenever a
single entry overflows, arrange to redirect all entries with the
same target.
|
|
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
gas/
* config/tc-ppc.c (parse_cpu): Delete.
(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
|
|
PR gas/9915
* config/tc-i386.h (LOCAL_LABELS_DOLLAR): New. Defined as 0.
(LOCAL_LABELS_FB): Undefine befoe define.
|
|
|
|
* read.c (s_fill, s_space, s_float_space, float_cons, stringer,
s_incbin): Call md_cons_align (1).
gas/testsuite:
* gas/arm/mapmisc.d, gas/arm/mapmisc.dat, gas/arm/mapmisc.s: New.
|
|
based targets.
(s_alpha_comm): Only define "temp" and "log_align" local variables
for EVAX targets.
|
|
* ppc.h (R_PPC_TLSGD, R_PPC_TLSLD): Add new relocs.
* ppc64.h (R_PPC64_TLSGD, R_PPC64_TLSLD): Add new relocs.
bfd/
* reloc.c (BFD_RELOC_PPC_TLSGD, BFD_RELOC_PPC_TLSLD): New.
* section.c (struct bfd_section): Add has_tls_get_addr_call.
(BFD_FAKE_SECTION): Init new flag.
* ecoff.c (bfd_debug_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_TLSGD and R_PPC_TLSLD.
(ppc_elf_reloc_type_lookup): Handle new relocs.
(ppc_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls.
(ppc_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_TLSGD, R_PPC64_TLSLD.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(ppc64_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc64_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls. Set toc_ref for new relocs as
appropriate.
(ppc64_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Error if ppc32 tls got relocs
have non-zero addend.
(md_assemble): Parse args of __tls_get_addr calls.
(md_apply_fix): Handle BFD_RELOC_PPC_TLSGD and BFD_RELOC_PPC_TLSLD.
ld/testsuite/
* ld-powerpc/tlsmark.s, * ld-powerpc/tlsmark.d: New test.
* ld-powerpc/tlsmark32.s, * ld-powerpc/tlsmark32.d: New test.
* ld-powerpc/powerpc.exp: Run them.
|
|
|
|
* config/tc-hppa.h (tc_frob_symbol): Don't frob absolute symbols with
local scope for ELF targets.
|
|
|
|
Eric Botcazou <ebotcazou@adacore.com>
Douglas B Rupp <rupp@gnat.com>
* doc/as.texinfo (Overview): Mention -replace/-noreplace options
for Alpha.
* doc/c-alpha.texi (Alpha Options): Document -replace/-noreplace.
* config/tc-alpha.h (TC_VALIDATE_FIX_SUB): Define to 1 (evax).
(OBJ_SYMFIELD_TYPE): Remove.
(tc_canonicalize_symbol_name): Define to evax_shorten_name.
(TC_IMPLICIT_LCOMM_ALIGNMENT): For alignment to 3 on evax.
(tc_frob_file_before_fix): Do not defined on evax.
* config/tc-alpha.c: Always includes dwarf2dbg.h.
Include vms.h if OBJ_EVAX.
(struct alpha_fixup): Add xtrasym and procsym (evax only).
(enum alpha_macro_arg): Remove trailing comma.
(md_longopts): Add replace and noreplace arguments (evax only).
(alpha_evax_proc_hash): New variable.
(alpha_link_section): Make it global.
(alpha_ctors_section, alpha_dtors_section): Removed.
(alpha_ctors_symbol, alpha_dtors_symbol): Ditto.
(alpha_lit8_section): Ifndef'ed on evax.
(alpha_lit8_symbol): Ditto.
(alpha_prologue_label): New variable.
(alpha_linkage_symbol): New variable (evax only).
(alpha_flag_replace): Ditto.
(struct alpha_evax_procs): Add handler and handler_data field.
(alpha_evax_proc): Now of type pointer.
(alpha_linkage_fixup_root, alpha_linkage_fixup_tail): New variables.
(struct alpha_reloc_tag): Add sym and psym fields (evax only).
(get_alpha_reloc_tag): Initialize sym and psym fields (evax only).
(alpha_adjust_relocs): Ifndef'ed on evax.
(load_expression): Add opname argument.
Implement LDA/BSR optimization for evax.
(emit_lda): Adjust for new prototype of load_expression.
(emit_ir_load): Ditto. Do not nothing for GP if ..lk symbols.
(emit_loadstore): Likewise.
(emit_ldXu): Likewise.
(emit_stX): Likewise.
(emit_jsrjmp): Likewise. Implement LDA/BSR optimization for evax.
(emit_ldgp): Avoid warning in evax case.
(add_to_link_pool): Make it static. Return symbolic expression rather
than number expression for the offset.
(s_alpha_text): Create .text symbol for evax if not already created.
(s_alpha_comm): Do not create specific section for common symbol.
Fill common area with zeros for evax.
(s_alpha_prologue): Create alpha_prologue_label.
(s_alpha_section_name): New function (evax).
(s_alpha_section_word): Likewise.
(section_name): New static variabke moved out from ...
(s_alpha_section): ... here. Create new sections on demand.
(s_alpha_literals): New function (evax).
(s_alpha_ent): Create alpha_evax_proc instance and insert it in the
alpha_evax_proc_hash table.
(s_alpha_handler): New function (evax).
(s_alpha_frame): Adjust for new type of alpha_evax_proc.
(s_alpha_prologue): New function (evax).
(s_alpha_pdesc): Adjust for new type of alpha_evax_proc and new
handling of procedures with hash table.
Add support for condition handlers.
(s_alpha_linkage): Create linkage_fixup instance and chain it.
(s_alpha_fp_save): Adjust for new type of alpha_evax_proc.
(s_alpha_mask): Likewise.
(s_alpha_fmask): Likewise.
(s_alpha_end): Clear alpha_evax_proc.
(s_alpha_align): Increase max_alignment to 16.
(alpha_print_token): Call print_expr_1 instead of print_expr.
(md_pseudo_table): Add "section", "literals", "handler" and
"handler_data" (evax). Do not ignore "prologue" on evax.
Fix indentation.
(md_begin): Create hash table for alpha_evax_proc_hash.
(md_parse_option): Handle OPTION_REPLACE and OPTION_NOREPLACE.
(md_show_usage): Mention -replace/-noreplace for evax.
(md_apply_fix): Handle evax relocs (_NOP, _LDA, _BSR and _BOH).
(alpha_force_relocation): Likewise.
(alpha_fix_adjustable): Likewise. Add BFD_RELOC_16 case.
(tc_gen_reloc): Likewise. Add BFD_RELOC_ALPHA_LINKAGE for evax.
(emit_insn): New cases for evax specific relocs.
(assemble_insn): Fix indentation.
Take care of -MDISP in operand table.
* config/obj-evax.h (struct alpha_linkage_fixups): New struct.
(OBJ_SYMFIELD_TYPE): New macro.
(obj_symbol_new_hook): Define.
(obj_frob_symbol, obj_frob_file_before_adjust): Ditto.
(obj_frob_file_before_fix): Ditto.
(PDSC_S_M_HANDLER_VALID): New macro.
(PDSC_S_M_HANDLER_DATA_VALID): Ditto.
(TC_IMPLICIT_LCOMM_ALIGNMENT): Remove.
Add prototypes for functions declared in obj-evax.c
* config/obj-evax.c: Include subsegs.h, struc-symbol.h, safe-ctype.h.
(s_evax_weak): Convert to ansi-C.
(evax_symbol_new_hook): New function.
(evax_frob_symbol): Ditto.
(evax_frob_file_before_adjust): Ditto.
(evax_frob_file_before_fix): Ditto.
(evax_shorten_name): Ditto.
(crc32): Ditto.
(encode_32): Ditto.
(encode_16): Ditto.
(decode_16): Ditto.
(shorten_identifier): Ditto.
(is_truncated_identifier): Ditto.
* dwarf2dbg.c (out_debug_info): Do not append trailing slash on VMS.
* as.c (close_output_file): Remove #ifndef OBJ_VMS.
(main): Ditto.
|
|
* config/tc-ia64.c (fix_insn): Fix warning reported by
-Wformat-security.
|
|
|
|
ARMv6-M cores.
* gas/arm/archv6m.s: Add dmb, dsb, and isb.
* gas/arm/archv6m.d: Likewise.
|
|
2009-01-19 Robert Millan <rmh@aybabtu.com>
Support GNU/kOpenSolaris.
* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
(_LT_LANG_CXX_CONFIG) [kopensolaris*-gnu]: Recognize
GNU/kOpenSolaris.
binutils/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
bfd/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* configure: Regenerate.
|
|
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
gas/testsuite/
* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
* gas/ppc/e500mc.s: Likewise.
* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
* gas/ppc/power7.s: Likewise.
* gas/ppc/vsx.d: New test.
* gas/ppc/vsx.s: Likewise.
* gas/ppc/ppc.exp: Run it.
include/opcode/
* ppc.h (PPC_OPCODE_POWER7): New.
opcodes/
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
|
|
* config/tc-i386.c (fits_in_imm4): Removed.
|
|
|
|
(SAVE_IMMEDIATE): New define.
|
|
(do_t_mov_cmp): Permit R13 as the second
argument to "cmp.n".
* gas/arm/thumb2_bad_reg.s: Update to allow R13 as second argument
for CMP.
* gas/arm/thumb2_bad_reg.l: Adjust accordingly.
|
|
* config/tc-i386.c (type_names): Add OPERAND_TYPE_REGYMM.
(pt): Replace UINTS_ALL_ZERO with operand_type_all_zero.
|
|
* config/tc-i386.c (type_names): Remove OPERAND_TYPE_VEX_IMM4.
|
|
2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (vex_imm4): Removed.
(VEX_check_operands): Likewise.
(match_template): Updated.
opcodes/
2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
(operand_types): Remove Vex_Imm4.
* i386-opc.h (Vex_Imm4): Removed.
(OTMax): Updated.
(i386_operand_type): Remove vex_imm4.
* i386-opc.tbl: Remove Vex_Imm4 comments.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
|
|
* doc/as.texinfo: Add S390 support and pull in c-s390.texi.
* doc/Makefile.am (CPU_DOCS): Add c-s390.texi.
* doc/Makefile.in: Likewise.
* doc/c-s390.texi: New.
|
|
* config/tc-m68k.c (mcf51qe_ctrl): Add CPUCR.
(mcf52259_ctrl, mcf52277_ctrl, mcf53017_ctrl): New.
(mcf5307_ctrl): Add VBR.
(no_mac): New variable.
(m68k_extensions): Refer to no_mac mask.
(m68k_cpus): Add 51, 51ac, 51cn, 51em, 51jm, 52274, 52277,
52252..52259, 53011..53017.
(m68k_ip): Process CPUCR.
(init_table): Add cpucr entry.
(m68k_set_extension): Allow negated mask to refer to a variable.
(md_show_usage): Use '%s' to silence fprintf warning.
* config/m68k-parse.h (CPUCR): New control register.
gas/testsuite/
* m68k/br-isac.d, m68k/br-isac.s: Add stldsr test.
opcodes/
* m68k-opc.c (m68k_opcodes): Add stldsr instruction.
|
|
as_bad calls to silence compiler warning.
|
|
* config/tc-arm.c (MODE_RECORDED): New define.
(output_inst): Record the thumb_mode in the current frag.
(arm_handle_align): Ignore the MODE_RECORDED bit in tc_frag_data.
(arm_init_frag): Only set the tc_frag_data field if it has not
already been set.
|
|
|
|
2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (January, 2009)
* config/tc-i386.c (CPU_FLAGS_PCLMUL_MATCH): New.
(CPU_FLAGS_AVX_MATCH): Updated.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(cpu_flags_match): Likewise.
gas/testsuite/
2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (January, 2009)
* gas/i386/arch-avx-1-3.l: New.
* gas/i386/arch-avx-1-3.s: Likewise.
* gas/i386/arch-avx-1-4.l: Likewise.
* gas/i386/arch-avx-1-4.s: Likewise.
* gas/i386/arch-avx-1-5.l: Likewise.
* gas/i386/arch-avx-1-5.s: Likewise.
* gas/i386/arch-avx-1-6.l: Likewise.
* gas/i386/arch-avx-1-6.s: Likewise.
* gas/i386/arch-10.s: Add vpclmul instructions.
* gas/i386/arch-avx-1.s: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/sse2avx.s: Add pclmul instructions.
* gas/i386/x86-64-sse2avx.s: Likewise.
* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-avx-1.d: Likewise.
* gas/i386/arch-avx-1-1.l: Likewise.
* gas/i386/arch-avx-1-2.l: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.
* gas/i386/i386.exp: Run arch-avx-1-3, arch-avx-1-4,
arch-avx-1-5 and arch-avx-1-6.
opcodes/
2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (January, 2009)
* i386-dis.c (PREFIX_VEX_3A44): New.
(VEX_LEN_3A44_P_2): Likewise.
(PREFIX_VEX_3A48): Updated.
(VEX_LEN_3A4C_P_2): Likewise.
(prefix_table): Add PREFIX_VEX_3A44.
(vex_table): Likewise.
(vex_len_table): Add VEX_LEN_3A44_P_2.
* i386-opc.tbl: Add PCLMUL + AVX instructions.
* i386-tbl.h: Regenerated.
|
|
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr.
* archures.c (bfd_mach_mips_xlr): Define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_xlr): Define.
(arch_info_struct): Add XLR entry.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR.
(mips_set_isa_flags): Handle bfd_mach_mips_xlr
(mips_mach_extensions): Add XLR entry.
binutils:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.
gas:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T,
M_MSGWAIT and M_MSGWAIT_T.
(mips_cpu_info_table): Add XLR entry.
* doc/c-mips.texi (-march): Document xlr.
gas/testsuite:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* gas/mips/mips.exp (xlr): New architecture.
(xlr-ext): Run test.
* gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New.
include/elf:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (E_MIPS_MACH_XLR): Define.
include/opcode:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips.h (INSN_XLR): Define.
(INSN_CHIP_MASK): Update.
(CPU_XLR): Define.
(OPCODE_IS_MEMBER): Update.
(M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define.
opcodes:
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
(mips_arch_choices): Add XLR entry.
* mips-opc.c (XLR): Define.
(mips_builtin_opcodes): Add XLR instructions.
|
|
2009-01-29 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add ata6289.
* doc/c-avr.texi: Likewise.
|
|
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am
and install-pdf-recursive targets. Define pdfdir.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate
* doc/Makefile.in: Regenerate.
binutils:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
etc:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* configure: Regenerate.
gas:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets.
* doc/Makefile.am: Define pdf__strip_dir. Add
install-pdf and install-pdf-am targets.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets. Define pdf__strip_dir.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* configure.in: AC_SUBST pdfdir.
* Makefile.am: Add install-pdf, install-pdf-am,
and install-pdf-recursive targets. Define pdf__strip_dir.
* po/Make-in: Add install-pdf target.
* configure: Regenerate.
* Makefile.in: Regenerate.
opcodes:
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-pdf target.
* po/Make-in: Add install-pdf target.
* Makefile.in: Regenerate.
|
|
ld/testsuite/
* ld-m68k/got-multigot-12-13-14-34-35-ok.d: Update.
* ld-m68k/got-multigot-14-ok.d: Update.
* ld-m68k/m68k-got.exp: Update.
* ld-m68k/got-negative-12-13-14-34-ok.d: Update.
* ld-m68k/got-negative-14-ok.d: Update.
* ld-m68k/tls-gd-1.d, ld-m68k/tls-gd-2.d: New tests.
* ld-m68k/tls-gd-ie-1.d, ld-m68k/tls-ie-1.d: New tests.
* ld-m68k/tls-ld-1.d, ld-m68k/tls-ld-2.d: New tests.
* ld-m68k/tls-ld-1.s, ld-m68k/tls-ld-2.s, ld-m68k/tls-le-1.s:
New test sources.
* ld-m68k/tls-no-1.s, ld-m68k/tls-gd-ie-1.s, ld-m68k/tls-gd-1.s:
New test sources.
* ld-m68k/tls-gd-2.s, ld-m68k/tls-ie-1.s: New test sources.
* ld-m68k/m68k.exp: Run new tests.
(merge isa-a isa-a:nodiv): Fix.
gas/testsuite/
* gas/m68k/tls-gd-3.d, gas/m68k/tls-gd-3.s: New test.
* gas/m68k/all.exp: Run it.
gas/
* config/m68k-parse.h (enum pic_relocation): Add values for TLS
relocations.
* config/m68k-parse.y (yylex): Parse TLS relocations.
* config/tc-m68k.c (m68k_elf_cons): New static function.
(md_pseudo_table): Use it.
(get_reloc_code, tc_m68k_fix_adjustable, tc_gen_reloc): Handle TLS
relocations.
(md_apply_fix): Fix to set thread local flag.
(m68k_elf_suffix): New static function; helper for m68k_elf_cons.
include/elf/
* m68k.h: Map TLS relocations to numbers.
bfd/
* bfd-in2.h: Regenerate.
* elf32-m68k.c: Handle 2-slot GOT entries. Rename variables and
fields from n_entries to n_slots where appropriate, update comments.
(HOWTO): Add TLS relocations.
(reloc_map): Map BFD_RELOC_68K_TLS_* to R_68K_TLS_*.
(enum elf_m68k_got_offset_size): New enum.
(struct elf_m68k_got_entry.type): Move field to ...
(struct elf_m68k_got_entry_key): ... here. Update all uses.
(elf_m68k_reloc_got_type, elf_m68k_reloc_got_offset_size): New static
functions.
(elf_m68k_reloc_got_n_entries, elf_m68k_reloc_tls_p): New static
functions.
(struct elf_m68k_got): merge rel_8o_n_entries and rel_8o_16o_n_entries
fields into n_entries array. Update comments.
(elf_m68k_init_got): Simplify, update all uses.
(elf_m68k_init_got_entry_key): Handle R_68K_TLS_LDM32 reloc, update.
(ELF_M68K_REL_8O_MAX_N_ENTRIES_IN_GOT): Adjust to handle 2-slot
GOT entries; update name, update all uses.
(ELF_M68K_REL_8O_16O_MAX_N_ENTRIES_IN_GOT): Ditto.
(elf_m68k_get_got_entry): Update.
(elf_m68k_update_got_entry_type): Rewrite to handle TLS GOT entries,
simplify.
(elf_m68k_remove_got_entry_type): Simplify.
(elf_m68k_add_entry_to_got, elf_m68k_can_merge_gots_1): Update.
(elf_m68k_can_merge_gots): Update.
(elf_m68k_merge_gots_1, elf_m68k_merge_gots): Update.
(struct elf_m68k_finalize_got_offsets_arg): Rewrite to handle 2-slot
GOT entries, simplify.
(elf_m68k_finalize_got_offsets_1, elf_m68k_finalize_got_offsets): Same.
(struct elf_m68k_partition_multi_got_arg): Add slots_relas_diff
field, remove obsoleted local_n_entries field.
(elf_m68k_partition_multi_got_2): New static function.
(elf_m68k_partition_multi_got_1, elf_m68k_partition_multi_got): Use it;
update.
(elf_m68k_remove_got_entry_type): Update.
(elf_m68k_install_rela, dtpoff_base, tpoff): New static functions.
(elf_m68k_check_relocs): Handle TLS relocations. Remove unnecessary
update of sgot->size and srelgot->size.
(elf_m68k_gc_sweep_hook): Update.
(elf_m68k_install_rela, dtpoff_base, tpoff): New static functions.
(elf_m68k_relocate_section, elf_m68k_finish_dynamic_symbol): Handle
TLS relocations.
* reloc.c (BFD_RELOC_68K_TLS_*): Declare TLS relocations.
* libbfd.h (bfd_reloc_code_real_names): Add BFD_RELOC_68K_TLS_*.
|
|
* config/tc-pdp11.c (parse_op_no_deferred): Fix handling of
indexed addressing for symbolic expressions.
|
|
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (BAD_SP): Define.
(s_arm_unwind_fnstart): Use REG_SP.
(s_arm_unwind_setfp): Likewise.
(reject_bad_reg): New macro.
(do_co_reg): Check for bad registers.
(do_co_reg2c): Likewise.
(do_srs): Use REG_SP.
(do_t_add_sub): Check for bad registers.
(do_t_adr): Likewise.
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_bfc): Likewise.
(do_t_bfi): Likewise.
(do_t_bfx): Likewise.
(do_t_blx): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_clz): Likewise.
(do_t_div): Likewise.
(do_t_mla): Likewise.
(do_t_mlal): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mov16): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mrs): Likewise.
(do_t_msr): Likewise.
(do_t_mul): Likewise.
(do_t_mull): Likewise.
(do_t_orn): Likewise.
(do_t_pkhbt): Likewise.
(do_t_pld): Likewise.
(do_t_rbit): Likewise.
(do_t_rev): Likewise.
(do_t_rrx): Likewise.
(do_t_rsb): Likewise.
(do_t_shift): Likewise.
(do_t_simd): Likewise.
(do_t_ssat): Likewise.
(do_t_ssat16): Likewise.
(do_t_sxtah): Likewise.
(do_t_sxth): Likewise.
(do_t_tb): Likewise.
(do_t_usat): Likewise.
(do_t_usat16): Likewise.
(nysn_insert_sp): Use REG_SP.
gas/testsuite:
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* gas/arm/copro.s: Avoid using r15 where not permitted.
* gas/arm/copro.d: Adjust accordingly.
* gas/arm/thumb2_bad_reg.s: New.
* gas/arm/thumb2_bad_reg.l: Likewise.
* gas/arm/thumb2_bad_reg.d: Likewise.
|
|
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (do_t_orn): New function.
(do_t_rrx): Likewise.
(insns): Add orn and rrx.
gas/testsuite:
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* gas/arm/thumb32.s: Add tests for orn and rrx.
* gas/arm/thumb32.d: Adjust accordingly.
* gas/arm/thumb32.l: Likewise.
* gas/arm/thumb2_invert.s: Add tests for orn and orr.
* gas/arm/thumb2_invert.d: Adjust accordingly.
* gas/arm/tcompat.s: Add tests for rrx.
* gas/arm/tcompat.d: Adjust accordingly.
|
|
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (insns): Add qasx, qsax, shasx, shsax, ssax,
uasx, uhasx, uhsx, uqasx, uqsax, usax.
gas/testsuite:
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* gas/arm/thumb32.s (qadd): Add tests for them.
* gas/arm/thumb32.d: Adjust accordingly.
|
|
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (insns): Correct encoding of qadd, qdadd, qsub,
qdsub in Thumb-2 mode.
gas/testsuite:
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* gas/arm/thumb32.s (qadd): Add qadd, qdadd, qsub, and qdsub.
* gas/arm/thumb32.d: Likewise.
opcodes:
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
qsub, and qdsub.
|
|
2009-01-29 Paul Brook <paul@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (do_t_mul): In Thumb-2 mode, use 16-bit encoding
of MUL when possible.
gas/testsuite:
2009-01-29 Paul Brook <paul@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
* gas/arm/thumb2_mul.s: New file.
* gas/arm/thumb2_mul.d: Likewise.
* gas/arm/thumb2_mul-bad.s: Likewise.
* gas/arm/thumb2_mul-bad.d: Likewise.
* gas/arm/thumb2_mul-bad.l: Likewise.
* gas/arm/t16-bad.s: Add tests for"mul" with high registers.
* gas/arm/t16-bad.l: Update accordingly.
|
|
* gas/all/gas.exp: Expect forward test to fail for MeP.
Expect relax test to fail for MeP.
* gas/mep/relocs.d: Update expected disassembly.
* lib/ld-lib.exp (check_gc_sections_available): Add MeP to list of
targets which do not support garbage collection.
* ld-srec/srec.exp (run_srec_test): Expect tests to fail for MeP.
* ld-elf/group8a.d: Likewise.
* ld-elf/group8b.d: Likewise.
* ld-elf/group9a.d: Likewise.
* ld-elf/group9b.d: Likewise.
* binutils-all/objdump.W: Do not assume that high and low PC
addresses will have been computed.
|
|
.4byte, .8byte, .bss, .even, .extend, .ldouble, .packed, .secrel32
directives.
|
|
sequence containing an unsupported reloc type.
(enum options): Replace computed #define's constants for option
numbers with this enum.
(struct md_longopts): Use the enum. Allow OPTION_32 in a non-ELF
environment.
(md_parse_option): Allow -32 in a non-ELF environment.
* gas/lib/gas-defs.exp: Update description of run_dump_test proc.
* gas/mips/dli.d: Pass -64 to gas.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/octeon.d: Likewise.
* gas/mips/sb1-ext-mdmx.d: Likewise.
* gas/mips/sb1-ext-ps.d: Likewise.
* gas/mips/e32el-rel2.s: Pass -march=mips3 to gas.
Update expected relocs.
* gas/mips/ld-ilocks-addr32.d: Do not run for tx39 targets.
* gas/mips/mips.exp: Remove 'ilocks' variable.
Add ecoff targets to 'addr32' variable.
Set 'no_mips16' for ecoff targets.
Do not run div-ilocks or mul-ilocks test variants.
* gas/mips/mips16-intermix.d: Use nm instead of objdump so that
the symbol table output is sorted. Update expecetd output.
|