aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2006-06-202006-06-20 David Ayers <d.ayers@inode.at>David Ayers1-123/+118
PR bootstrap/28072 * configure.in: Add target-boehm-gc to noconfigdirs depending on whether target-libjava is being configured instead of whether the java front end is enabled. * configure: Regenerate.
2006-06-13 Sync from gcc:Dave Anglin1-1/+1
2006-06-12 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> * configure.in: Don't enable libgomp on hpux10. * configure: Rebuilt.
2006-06-132006-06-13 David Ayers <d.ayers@inode.at>David Ayers1-87/+87
Sync from gcc: 2006-06-12 David Ayers <d.ayers@inode.at> PR bootstrap/27963 PR target/19970 * configure.in: Remove target-boehm-gc from noconfigdirs where ${libgcj} is specified. * configure: Regenerate.
2006-06-072006-06-07 Carlos O'Donell <carlos@codesourcery.com>Carlos O'Donell1-274/+271
Sync from gcc: 2006-06-06 David Ayers <d.ayers@inode.at> PR libobjc/13946 * Makefile.def: Add dependencies for libobjc which boehm-gc. * Makefile.in: Regenerate. * configure.in: Add --enable-objc-gc at toplevel and have it enable boehm-gc for Objective-C. Remove target-boehm-gc from libgcj. Add target-boehm-gc to target_libraries. Add target-boehm-gc to noconfigdirs where ${libgcj} is specified. Assert that boehm-gc is supported when requested for Objective-C. Only build boehm-gc if needed either for Java or Objective-C. * configure: Regenerate. 2006-06-05 Paolo Bonzini <bonzini@gnu.org> PR 27674 * Makefile.tpl (configure-[+prefix+][+module+], all-[+prefix+][+module+]): Depend on stage_current if bootstrapping. Remove rule to unstage bootstrapped modules. (stage_current): New. * Makefile.in: Regenerate. 2006-05-20 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> Andreas Tobler <a.tobler@schweiz.ch> * configure.in: Enable libgcj for hppa*-hp-hpux11*. * configure: Rebuilt. Revert 2006-01-31 Richard Guenther <rguenther@suse.de> Paolo Bonzini <bonzini@gnu.org> * Makefile.def (target_modules): Add libgcc-math target module. * configure.in (target_libraries): Add libgcc-math target library. (--enable-libgcc-math): New configure switch. * Makefile.in: Re-generate. * configure: Re-generate.
2006-05-24Enable gprof for cross builds.Mark Shinwell1-1/+1
2006-05-02* configure.in: Restore CFLAGS if GM P isn't present.DJ Delorie1-1/+1
* configure: Regenerate.
2006-04-19* configure.in (m32c): Build libstdc++-v3. Pass flags toDJ Delorie1-135/+146
reference libgloss so that libssp can be built in a combined tree. * configure: Regenerate.
2006-04-062006-04-06 Carlos O'Donell <carlos@codesourcery.com>Carlos O'Donell1-147/+207
* Makefile.tpl: Add install-html target. * Makefile.def: Add install-html target. * Makefile.in: Regenerate. * configure.in: Add --with-datarootdir, --with-docdir, and --with-htmldir options. * configure: Regenerate. bfd/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir htmldir. Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST for datarootdir, docdir and htmldir. * configure: Regenerate. bfd/doc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html and install-html-am targets. Define datarootdir, docdir and htmldir. * Makefile.in: Regenerate. binutils/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir and htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. etc/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.in: Add install-html target. Add htmldir, docdir and datarootdir. * configure.texi: Document install-html target. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. gas/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * doc/Makefile.am: Add install-html and install-html-am targets. * doc/Makefile.in: Regenerate. gprof/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * po/Make-in: Add install-html target. * Makefile.am: Add install-html, install-html-am and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. intl/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * intl/Makefile.in: Add html info and dvi and install-html to .PHONY Add install-html target. ld/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html, install-html-am, and install-html-recursive targets. * Makefile.in: Regenerate. * configure.in: AC_SUBST datarootdir, docdir, htmldir. * configure: Regenerate. * po/Make-in: Add install-html target. opcodes/ 2006-04-06 Carlos O'Donell <carlos@codesourcery.com> * Makefile.am: Add install-html target. * Makefile.in: Regenerate.
2006-03-31 PR binutils/1860Ben Elliston1-2/+2
* configure.in: Require makeinfo 4.4 or higher. * configure: Regenerate.
2006-03-142006-03-14 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-158/+146
Sync with gcc: 2006-03-10 Aldy Hernandez <aldyh@redhat.com> * configure.in: Handle --disable-<component> generically. * configure: Regenerate. 2006-02-21 Rafael Avila de Espindola <rafael.espindola@gmail.com> * Makefile.tpl (BUILD_CONFIGDIRS): Remove. (TARGET_CONFIGDIRS): Remove. * configure.in: Remove AC_SUBST(target_configdirs). * Makefile.in, configure: Regenerated.
2006-02-202006-02-20 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-141/+132
PR bootstrap/25670 * Makefile.tpl ([+compare-target+]): Print explanation messages. * Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass. * Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass. (EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES, BUILD_PREFIX, BUILD_PREFIX_1. * configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute. * Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too. * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too. * Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+], all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead of `cat stage_current`. Always provide the `r' and `s' variables. (clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into a single shell execution. (configure-[+prefix+][+module+], all-[+prefix+][+module+]): For bootstrapped modules, make the stage1 module if the build was not started yet, else build the current stage. (all-host, all-target): Omit bootstrapped modules (if bootstrapping). (all-build, all-host, all-target, [+make_target+]-host, [+make_target+]-target): Do not use \-continued lines. (target modules): Depend on stage_last, not all-gcc, if bootstrapping. (current_stage, restrap, stage_last): New. * Makefile.in: Regenerate. * configure: Regenerate.
2006-02-142006-02-14 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-140/+188
Sync from gcc: 2006-01-31 Richard Guenther <rguenther@suse.de> Paolo Bonzini <bonzini@gnu.org> * Makefile.def (target_modules): Add libgcc-math target module. * configure.in (target_libraries): Add libgcc-math target library. (--enable-libgcc-math): New configure switch. * Makefile.in: Re-generate. * configure: Re-generate. * libgcc-math: New toplevel directory. 2006-01-18 Richard Henderson <rth@redhat.com> Jakub Jelinek <jakub@redhat.com> Diego Novillo <dnovillo@redhat.com> * libgomp: New directory. * Makefile.def: Add target_module libgomp. * Makefile.in: Regenerate. * configure.in (target_libraries): Add target-libgomp. * configure: Regenerate.
2006-02-142006-02-14 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-137/+197
Andreas Schwab <schwab@suse.de> * configure: Regenerate. config: 2006-02-14 Paolo Bonzini <bonzini@gnu.org> Andreas Schwab <schwab@suse.de> * acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name. (ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
2006-01-262006-01-16 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-465/+1526
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier. Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find the assembler, linker and binutils. * configure: Regenerate. config: 2006-01-16 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test $with_build_time_tools. (ACX_PATH_SEP): New. (ACX_TOOL_DIRS): Move here from the gcc directory. (ACX_CHECK_INSTALLED_TARGET_TOOL): New. (GCC_TARGET_TOOL): Do not use a host tool if we found a target tool with a complete path in either $with_build_time_tools or $exec_prefix.
2006-01-042006-01-04 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-157/+97
Sync from gcc: 2006-01-04 Paolo Bonzini <bonzini@gnu.org> PR bootstrap/24252 * Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES. * Makefile.tpl (OBJDUMP): New. (EXTRA_HOST_FLAGS): Add it. (EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass. * Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try to use symbolic links between directories. Avoid race conditions or make them harmless. * configure.in: Do not try to use symbolic links between directories. * Makefile.def (LEAN): Pass. * Makefile.tpl (LEAN): Define. (stage[+id+]-start): Accept that the previous directory does not exist, if the bootstrap is lean. (stage[+id+]-bubble): Invoke lean bootstrap commands after stage[+id+]-start. Use a makefile variable and an `if' instead of a configure substitution. ([+compare-target+]): Likewise. ([+bootstrap-target+]-lean): New. * configure.in: Remove lean bootstrap support from here. * Makefile.in: Regenerate. * configure: Regenerate. 2006-01-02 Andreas Schwab <schwab@suse.de> * configure.in: When reconfiguring remove Makefile in all stage directories. * configure: Regenerate.
2005-12-27Add support for RDOS targets.Nick Clifton1-107/+129
2005-12-202005-12-20 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-79/+78
Revert Ada-related part of the previous change. * Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET): Do not pass. * Makefile.tpl (BOOT_ADAFLAGS): Do not define. * Makefile.in: Regenerate. * configure.in: Do not include mt-ppc-aix target fragment. * configure: Regenerate. config: 2005-12-20 Paolo Bonzini <bonzini@gnu.org> Revert Ada-related part of the previous change. * mt-ppc-aix: Delete.
2005-12-192005-12-19 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-98/+105
* configure.in: Select appropriate fragments for PowerPC/AIX. * configure: Regenerate. * Makefile.def (flags_to_pass): Add ADAFLAGS, BOOT_ADAFLAGS, BOOT_CFLAGS, BOOT_LDFLAGS. * Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Handle BOOT_ADAFLAGS, BOOT_CFLAGS, BOOT_LDFLAGS. (TARGET_FLAGS_TO_PASS): Handle ADAFLAGS_FOR_TARGET. (stage[+id+]-bubble): Pass flags recursively to the comparison target. (stage): Fail if we cannot complete the work. config: 2005-12-19 Paolo Bonzini <bonzini@gnu.org> * mt-ppc-aix, mh-ppc-aix: New.
2005-12-142005-12-14 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-81/+80
* configure.in: Flip the top-level bootstrap switch. * configure: Regenerate. Merge from gcc: 2005-12-14 Daniel Jacobowitz <dan@codesourcery.com> * Makefile.tpl: Throughout the file, use : $(MAKE) along with $(stage) and $(unstage). (EXTRA_TARGET_FLAGS): Correct double-quoting. (all): Remove stray semicolon. (local-distclean): Don't handle multilib.tmp and multilib.out. (install.all): Set $s for consistency. (configure-[+prefix+][+module+]): Instead of [+deps+], handle check_multilibs setting. Always make the install directory. (configure-stage[+id+]-[+prefix+][+module+]): Likewise. Correct @if/@endif. (all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif. ($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove. (stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR). (multilib.out): Remove. * Makefile.in: Regenerated.
2005-12-12 Rename ms1 to mt, part 1Nathan Sidwell1-1/+1
* config.sub: Replace ms1 arch with mt. Allow ms1 as alias. * configure.in: Replace ms1 arch with mt. * configure: Rebuilt. * bfd/Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES, BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Replace ms1 with mt. (cpu_mt.lo, elf32-mt.lo): Update target and dependency names. * bfd/Makefile.in: Rebuilt. * bfd/config.bfd: Replace ms1 arch with mt. * bfd/configure.in: Replace ms1 files with mt files. * bfd/configure: Rebuilt. * bfd/elf32-mt.c: Renamed from elf32-ms1.c. Update include files. * bfd/cpu-mt.c: Renamed from cpu-ms1.c. * cpu/mt.cpu: Rename from ms1.cpu. * cpu/mt.opc: Rename from ms1.opc. * binutils/Makefile.am: Replace ms1 files with mt files. * binutils/Makefile.in: Rebuilt. * binutils/readelf.c (elf/mt.h): Adjust #include. * gas/configure.in: Replace ms1 arch with mt arch. * gas/configure: Rebuilt. * gas/configure.tgt: Replace ms1 arch with mt arch. * gas/config/tc-mt.c: Renamed from tc-ms1.c: Update include files. * gas/doc/Makefile.am (CPU_DOCS): Replace ms1 files with mt files. * gas/doc/Makefile.in: Rebuilt. * gas/testsuite/gas/mt: Renamed from ms1 dir. Update file names as needed. * gas/testsuite/gas/mt/errors.exp: Replace ms1 arch with mt arch. * gas/testsuite/gas/mt/mt.exp: Replace ms1 arch with mt arch. * gas/testsuite/gas/mt/relocs.exp: Replace ms1 arch with mt arch. * gdb/configure.tgt: Replace ms1 arch with mt arch. * gdb/config/mt: Renamed from ms1 dir. Update file names as needed. * gdb/config/mt/mt.mt (TDEPFILES): Replace ms1 file with mt file. * include/elf/mt.h: Renamed from ms1.h * ld/Makefile.am (ALL_EMULATIONS): Replace ms1 files with mt files. (eelf32mt.c): Update target name and dependencies. * ld/Makefile.in: Rebuilt. * ld/configure.tgt: Replace ms1 arch with mt arch. * ld/emulparams/elf32mt.sh: Renamed from elf32ms1.sh. Update comment. * libgloss/configure.in: Replace ms1 arch with mt arch. * libgloss/configure: Rebuilt. * libgloss/mt: Renamed from ms1 dir. * newlib/configure.host: Replace ms1 arch with mt arch. * newlib/libc/machine/mt: Renamed from ms1 dir. * opcodes/Makefile.am (CLEANFILES, CGEN_CPUS, MT_DEPS): Replace ms1 with mt. * opcodes/Makefile.in: Rebuilt. * opcodes/configure.in: Replace ms1 files with mt files. * opcodes/configure: Rebuilt. * sid/component/cgen-cpu/mt: Renamed from ms1 dir. Update file names as appropriate. * sid/component/cgen-cpu/mt/Makefile.am: Replace ms1 files with mt files. * sid/component/cgen-cpu/mt/Makefile.in: Rebuilt.
2005-12-05toplevel:Paolo Bonzini1-349/+971
2005-12-05 Paolo Bonzini <bonzini@gnu.org> Sync with gcc: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston <bje@au.ibm.com> * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston <jkj@sco.com> * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (GCC_TARGET_TOOL): New.
2005-11-11 * Makefile.def: Remove gdb dependencies for gdbtk.Daniel Jacobowitz1-50/+56
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables. (configure-gdb, install-gdb): New rules. * configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK. * Makefile.in, configure: Regenerated.
2005-10-17 * configure.in (bfin-*-*): Use test, not brackets, in if statement.Bernd Schmidt1-1/+1
* configure: Regenerate.
2005-10-09 * configure.in (arm-*-linux-gnueabi): Add to noconfigdirsKazu Hirata1-76/+80
target-libffi, target-qthreads, target-libjava, and targetlibobjc. * configure: Regenerate.
2005-10-06 * Makefile.def (flags_to_pass): Add OBJDUMP_FOR_TARGET.Daniel Jacobowitz1-8/+88
* Makefile.tpl (BASE_TARGET_EXPORTS): Add OBJDUMP. (OBJDUMP_FOR_TARGET, CONFIGURED_OBJDUMP_FOR_TARGET) (USUAL_OBJDUMP_FOR_TARGET): New. (EXTRA_TARGET_FLAGS): Add OBJDUMP. * configure.in: Check for $OBJDUMP_FOR_TARGET. * configure, Makefile: Regenerated.
2005-10-052005-10-05 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-53/+48
PR bootstrap/22340 * configure.in (default_target): Remove. * Makefile.tpl (all): Do not use prerequisites as subroutines (all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet. (do-[+make_target+], check, install, [+bootstrap_target+]): Do not use prerequisites as subroutines. (check-host, check-target): New. (bootstrap configure & all targets): Do not use stage*-start if the directory layout is already ok. (non-bootstrap configure & all targets): Prepend a $(unstage). (stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL. (NOTPARALLEL): Remove. (unstage, stage variables): New variables. (unstage, stage targets): Simply expand to those variables. * configure: Regenerate. * Makefile.in: Regenerate.
2005-10-03Regenerated with 2.13 version of autoconf.Catherine Moore1-4410/+1934
2005-10-03 * configure.in (bfin-*-*): Support bfin.Catherine Moore1-1934/+4416
* configure: Regenerated.
2005-09-302005-09-30 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-1/+1
* configure.in (*-*-darwin*): Build bfd, binutils and opcodes. * configure: Regenerated.
2005-09-29Index: ChangeLogGeoffrey Keating1-8/+168
2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP. (LIPO_FOR_TARGET): New. (CONFIGURED_LIPO_FOR_TARGET): New. (USUAL_LIPO_FOR_TARGET): New. (STRIP_FOR_TARGET): New. (CONFIGURED_STRIP_FOR_TARGET): New. (USUAL_STRIP_FOR_TARGET): New. * Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and STRIP_FOR_TARGET. * configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET, CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET. * Makefile.in: Regenerate. * configure.in: Regenerate. Index: gcc/ChangeLog 2005-09-28 Geoffrey Keating <geoffk@apple.com> * Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET. (stage1-start): Delete old libgcc and libunwind before moving anything into the stage directory. (stage2-start): Likewise. (stage3-start): Likewise. (stage4-start): Likewise. (stageprofile-start): Likewise. (stagefeedback-start): Likewise. * config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h header in tm_file and CPU-specific t-darwin in tmake_file. (i[34567]86-*-darwin*): Don't change tm_file. (powerpc-*-darwin*): Don't change tm_file or tmake_file. * config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc shared library stub for target OS version. * config/t-slibgcc-darwin (SHLIB_SOLINK): Delete. (SHLIB_LINK): Don't make SHLIB_SOLINK. (SHLIB_INSTALL): Don't install SHLIB_SOLINK. (libgcc_s.%.dylib): New. (LIBGCC): Define. (install-darwin-libgcc-stubs): New. (INSTALL_LIBGCC): New append. * config/i386/darwin-libgcc.10.4.ver: New. * config/i386/darwin-libgcc.10.5.ver: New. * config/i386/t-darwin: New. * config/rs6000/darwin-libgcc.10.4.ver: New. * config/rs6000/darwin-libgcc.10.5.ver: New. * config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete. * config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-202005-09-19 David Edelsohn <edelsohn@gnu.org>David Edelsohn1-56/+65
* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs. (rs6000-*-aix*): Same. * configure: Regenerate. 2005-09-14 Francois-Xavier Coudert <coudert@clipper.ens.fr> * configure.in: Recognize f95 in the --enable-languages option, and substitute it for fortran, issuing a warning. * configure: Regenerate.
2005-09-012005-08-30 Phil Edwards <phil@codesourcery.com>DJ Delorie1-1/+1
* configure.in (*-*-vxworks*): Add target-libstdc++-v3 to noconfigdirs. * configure: Regenerated.
2005-08-12toplevel:Paolo Bonzini1-530/+557
2005-08-12 Paolo Bonzini <bonzini@gnu.org> * configure.in: Replace NCN_STRICT_CHECK_TOOL with NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS. Look for alternate names of the target cc and c++ config: 2005-08-12 Paolo Bonzini <bonzini@gnu.org> * config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL, NCN_STRICT_CHECK_TARGET_TOOL): Remove. (NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-08-082005-08-08 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-350/+624
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET, GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target tools; remove code to manually set them. (Target tools): Look in the environment for them. * Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET, GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine. (AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc build directory. (CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET, CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET, CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET, USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET, USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New. (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete. * configure: Regenerate. * Makefile.in: Regenerate.
2005-07-27 * config/mt-gnu (CXXFLAGS): Include SYSROOT_CFLAGS_FOR_TARGET.Mark Mitchell1-75/+110
* Makefile.tpl (SYSROOT_CFLAGS_FOR_TARGET): New variable. (CFLAGS_FOR_TARGET): Use it. (CXXFLAGS_FOR_TARGET): Likewise. * Makefile.in: Regenerated. * configure.in (--with-build-sysroot): New option. * configure: Regenerated.
2005-07-14ChangeLog:Jim Blandy1-88/+72
2005-07-14 Jim Blandy <jimb@redhat.com> * configure.in: Add cases for Renesas m32c. * configure: Regenerated. bfd/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for m32c-*-elf (Renesas m32c and m16c). * Makefile.am (ALL_MACHINES): Add cpu-m32c.lo. (ALL_MACHINES_CFILES): Add cpu-m32c.c. (BFD32_BACKENDS): Add elf32-m32c.lo. (BFD32_BACKENDS_CFILES): Add elf32-m32c.c. (cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'. * Makefile.in: Regenerated. * archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New arch and mach codes. (bfd_m32c_arch): New arch info object. (bfd_archures_list): List bfd_m32c_arch. * bfd-in2.h: Regenerated. * config.bfd: Add case for the m32c. * configure.in: Add case for the m32c. * configure: Regenerated. * cpu-m32c.c, elf32-m32c.c: New files. * libbfd.h: Regenerated. * targets.c (bfd_elf32_m32c_vec): Declare. (_bfd_target_vector): List bfd_elf32_m32c_vec. binutils/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * readelf.c: #include "elf/m32c.h" (guess_is_rela, dump_relocations, get_machine_name): Add cases for EM_M32C. * Makefile.am (readelf.o): Update dependencies. * Makefile.in: Regenerated. cpu/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * m32c.cpu, m32c.opc: Machine description for the Renesas M32C. gas/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C. * Makefile.am (CPU_TYPES): List m32c. (TARGET_CPU_CFILES): List config/tc-m32c.c. (TARGET_CPU_HFILES): List config/tc-m32c.h. * configure.in: Add case for m32c. * configure.tgt: Add cases for m32c and m32c-*-elf. * configure: Regenerated. * config/tc-m32c.c, config/tc-m32c.h: New files. * doc/Makefile.am (CPU_DOCS): Add c-m32c.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set M32C. * doc/as.texinfo: Add text for the M32C-specific options and line comment characters, and refer to c-m32c.texi. * doc/c-m32c.texi: New file. include/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> * dis-asm.h (print_insn_m32c): New declaration. include/elf/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for Renesas M32C and M16C. * common.h (EM_M32C): New machine number. * m32c.h: New file. ld/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o. (eelf32m32c.c): New target. * Makefile.in: Regenerated. * configure.tgt: Add case for m32c-*-elf. * emulparams/elf32m32c.sh: New file. opcodes/ChangeLog: 2005-07-14 Jim Blandy <jimb@redhat.com> Add support for the Renesas M32C and M16C. * m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New. * m32c-desc.h, m32c-opc.h: New. * Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h. (CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c. (ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo. (CLEANFILES): List stamp-m32c. (M32C_DEPS): List stamp-m32c, if CGEN_MAINT. (CGEN_CPUS): Add m32c. (m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c) (m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS. (m32c_opc_h): New variable. (stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo) (m32c-opc.lo): New rules. * Makefile.in: Regenerated. * configure.in: Add case for bfd_m32c_arch. * configure: Regenerated. * disassemble.c (ARCH_m32c): New. [ARCH_m32c]: #include "m32c-desc.h". (disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c. (disassemble_init_for_target) [ARCH_m32c]: Same. * cgen-ops.h, cgen-types.h: New files. * Makefile.am (HFILES): List them. * Makefile.in: Regenerated.
2005-07-142005-07-13 Eric Christopher <echristo@redhat.com>Eric Christopher1-69/+92
* configure.in: Add toplevel noconfigdir support for tpf. * configure: Regenerate.
2005-07-11merge from gcc:DJ Delorie1-89/+71
2005-07-11 Jakub Jelinek <jakub@redhat.com> * Makefile.def (target_modules): Add libssp. * configure.in (target_libraries): Add target-libssp. * configure: Rebuilt. * Makefile.in: Rebuilt.
2005-07-07 * configure.in: Add --enable-libssp and --disable-libssp.Kazu Hirata1-75/+108
* configure: Regenerate with autoconf-2.13.
2005-07-07 * configure.in: Don't build sim or rda when targetting darwin.Geoffrey Keating1-88/+71
* configure: Regenerate.
2005-06-07 * configure.in <cris-*, crisv32-*>: Enable target-libffi again forHans-Peter Nilsson1-2/+2
*-*-linux* and *-*-elf. * configure: Regenerate.
2005-06-07Sync with gcc-toplevelHans-Peter Nilsson1-9/+28
2005-06-07 * configure.in (unsupported_languages): New macro.Hans-Peter Nilsson1-66/+81
<mmix-knuth-mmixware>: Set unsupported_languages. Name explicit non-ported target libraries in noconfigdirs. <cris-*, crisv32-*> Ditto, except for non-aout, non-elf, non-linux-gnu. Remove libgcj_ex_libffi. <lang_frag loop>: Set add_this_lang=no if the language is in unsupported_languages. * configure: Regenerate.
2005-06-06* configure.in: Fix typo in handling of --with-mpfr-dir.DJ Delorie1-61/+61
* configure: Regenerate.
2005-06-02 * configure.in: Set noconfigdirs for ms1.Aldy Hernandez1-0/+3
* configure: Regenerate.
2005-05-192005-05-19 Paul Brook <paul@codesourcery.com>Paul Brook1-2/+2
* configure.in: Rewrite misleading error message when requested language cannot be built. * configure: Regenerate.
2005-05-05 * configure.in: Always pass --target to target configures asMike Stump1-36/+38
otherwise rebuilds that do --recheck will fail. * confiugure: Rebuilt.
2005-04-292005-04-29 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-90/+75
Sync from gcc: 2005-04-22 Bernd Schmidt <bernd.schmidt@analog.com> * config.sub: Update from master copy. 2005-04-19 Hans-Peter Nilsson <hp@axis.com> * configure.in <crisv32-*-*, cris-*-*>: New local variable libgcj_ex_libffi. Have specific match for *-*-linux*. Separate matches for "*-*-aout" and "*-*-elf". Don't disable libffi for "*-*-elf" and "*-*-linux*". * configure: Regenerate. config: 2005-04-29 Paolo Bonzini <bonzini@gnu.org> * acx.m4 (ACX_PROG_GNAT): Remove stray break.
2005-03-30 * config/mh-mingw32: Delete.Joern Rennecke1-70/+88
* configure.in: Don't use it. * configure: Regenerate.
2005-03-302005-02-28 Paolo Bonzini <bonzini@gnu.org>Paolo Bonzini1-79/+34
* Makefile.def (bfd, opcodes, libstdc++-v3, libmudflap): Set lib_path. * Makefile.tpl (SET_LIB_PATH, REALLY_SET_LIB_PATH): Remove. (HOST_EXPORTS, STAGE_HOST_EXPORTS, TARGET_EXPORTS): Set $(RPATH_ENVVAR). (HOST_LIB_PATH): Generate from Makefile.def. (TARGET_LIB_PATH): Likewise. (Old bootstrap targets): Include TARGET_LIB_PATH into RPATH_ENVVAR. * Makefile.in: Regenerate. * configure.in (set_lib_path, SET_LIB_PATH, SET_GCC_LIB_PATH): Remove. (RPATH_ENVVAR): Include Darwin case. * configure: Regenerate. config: 2005-02-28 Paolo Bonzini <bonzini@gnu.org> * config/gcc-lib-path.m4: Remove.
generated by cgit v1.1 at 2024-12-21 14:48:18 +0000