Age | Commit message (Collapse) | Author | Files | Lines |
|
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
|
|
|
|
* configure.in (noconfigdirs) <sparc-*-solaris2.[0-6]>: Add libgcj.
* configure: Regenerate.
|
|
<crisv32-*-*, cris-*-*>: Only disable target-newlib and
target-libgloss when not *-*-elf and *-*-aout.
* configure: Regenerate.
|
|
* configure.in (sh64-*-*): Reenable gprof.
* configure: Regenerate.
|
|
|
|
|
|
* configure: Regenerate.
|
|
|
|
(hppa*64*-*-*): Delete incorrect comment.
* configure: Rebuilt.
|
|
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.
|
|
target-libgfortran.
* configure: Regenerate.
|
|
|
|
|
|
PR other/17783
* configure.in: Set up LD_LIBRARY_PATH by default for gcc.
* configure: Regenerated.
|
|
* configure.in (arm-*-oabi*, thumb-*-oabi*): Remove.
* configure: Regenerated.
bfd/
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Replace
elfarm-nabi with elf32-arm. Remove elfarm-oabi.
(elf32-arm.lo): Replace elfarm-nabi.lo rule. Remove elf32-arm.h
dependency.
* config.bfd: Move arm-*-oabi* and thumb-*-oabi* from obsolete list
to a new removed list. Remove normal configuration stanzas.
* configure.in: (bfd_elf32_bigarm_vec, bfd_elf32_bigarm_symbian_vec)
(bfd_elf32_littlearm_symbian_vec, bfd_elf32_littlearm_vec): Replace
elfarm-nabi.lo with elf32-arm.lo.
(bfd_elf32_bigarm_oabi_vec, bfd_elf32_littlearm_oabi_vec): Remove.
* elf32-arm.c: Renamed from elfarm-nabi.c. Inline elf32-arm.h.
* elf32-arm.h: Remove.
* elfarm-oabi.c: Remove.
* targets.c (_bfd_target_vector): Remove bfd_elf32_bigarm_oabi_vec
and bfd_elf32_littlearm_oabi_vec.
* aclocal.m4, Makefile.in, configure, doc/Makefile.in: Regenerated.
gas/
* configure.in: Remove arm-*-oabi and thumb-*-oabi.
* config/tc-arm.c (target_oabi): Delete.
(md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
(arm_opts): Remove moabi.
* doc/as.texinfo (Overview): Remove documentation of -moabi.
* doc/c-arm.texi (ARM Options): Likewise.
* configure: Regenerated.
ld/
* Makefile.am (ALL_EMULATIONS): Remove earmelf_oabi.o.
(earmelf_oabi.c): Remove rule.
* configure.tgt: Remove arm-*-oabi and thumb-*-oabi.
* emulparams/armelf_oabi.sh, emultempl/armelf_oabi.em: Delete files.
* Makefile.in: Regenerated.
|
|
* configure.in (case ${target}): Do not build fixincludes for avr.
* configure: Regenerated.
|
|
on platforms where it is not used.
* configure: Regenerated.
----------------------------------------------------------------------
|
|
* configure: Regenerated.
|
|
2004-10-12 Kelley Cook <kcook@gcc.gnu.org>
* configure.in (*-*-cygwin*): Supress warning if newlib not present.
* configure: Regenerate.
|
|
|
|
* configure: Regenerate.
|
|
* Makefile.tpl (REALLY_SET_LIB_PATH): Add @SET_GCC_LIB_PATH@.
(HOST_EXPORTS]): Add @SET_GCC_LIB_PATH@. Set and export
SET_GCC_LIB_PATH_CMD.
(BASE_TARGET_EXPORTS): Likewise.
* Makefile.in: Regenerated.
* configure.in (SET_GCC_LIB_PATH): Set and substitute.
* configure: Regenerated.
config/
2004-09-23 H.J. Lu <hongjiu.lu@intel.com>
* gcc-lib-path.m4: New file.
|
|
2004-09-23 Kelley Cook <kcook@gcc.gnu.org>
* config.guess: New upstream version
* compile, depcomp, install-sh, ylwrap: Likewise.
2004-09-19 Roger Sayle <roger@eyesopen.com>
* config/mh-x86omitfp: New host makefile fragment. Add
-fomit-frame-pointer to the default BOOT_CFLAGS.
* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
* configure: Regenerate.
2004-09-15 Andrew Pinski <pinskia@physics.uc.edu>
PR target/11572
* configure.in (*-*-darwin*): Renable libobjc.
* configure: Regenerate.
|
|
* Makefile.def: Remove libbanshee.
* Makefile.tpl: Ditto.
* configure.in: Ditto.
* Makefile.in: Regen.
* configure: Ditto.
|
|
*-*-netware, but add target-libmudflap.
Consolidate *-*-netware targets (of which really only i?86 exists)
into a single entry.
* configure: Likewise.
|
|
* Makefile.tpl (sorry): Remove.
(clean-stage[+id+], clean-stage[+id+]-module): New targets.
(cleanstrap targets): Depend on distclean, not distclean-stage1.
(do-clean): Clean per-stage directories too.
(do-distclean): Run distclean-stage1 too.
(.NOTPARALLEL): Enable during toplevel bootstrap.
(stage[+id+]-bubble): Enable parallel execution during
the recursive invocation.
* Makefile.in: Regenerate.
Sync from gcc (moving the Makefile.in change to Makefile.tpl):
2004-08-31 Robert Bowdidge <bowdidge@apple.com>
* Makefile.in: Move BOOT_CFLAGS above host makefile fragment include.
* configure.in: add test for powerpc-*-darwin* to specify makefile frag
* configure: regenerate
* config/mh-ppc-darwin: create file, override BOOT_CFLAGS for
-mdynamic-no-pic
|
|
* Makefile.def (build_modules): Add fixincludes.
(dependencies): Make gcc depend on fixincludes.
* configure.in (build_tools): Add fixincludes.
(build_configdirs): Always include build_libs.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
* Makefile.def (bootstrap stages): Add 'lean' parameter.
* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
phony targets; do not generate timestamp files.
(distclean-stageN): Remove references to their timestamp files.
(restageN, touch-stageN): Remove.
(stageN-bubble): Rewritten.
(compare): Support lean bootstraps.
* Makefile.in: Regenerate.
* configure.in: Only warn when bootstrapping but
build != host or build != target. Support lean bootstraps.
* configure: Regenerate.
Sync from gcc:
2004-08-26 Phil Edwards <phil@codesourcery.com>
* configure.in: Give a better error message if GMP/MPFR are missing
and a language needing them has been requested.
* configure: Regenerated.
2004-08-25 Phil Edwards <phil@codesourcery.com>
* configure.in: Print a list of available language front-ends if
a requested one is missing. Tidy stray tab characters.
* configure: Regenerated.
|
|
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): Rename extra_*_flags to
stage_*_flags.
* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
for bootstrapped modules if toplevel bootstrap is going.
(GCC bootstrap): Generate per-stage targets for all bootstrapped
modules. Adjust for changes in Makefile.def. Enable several
rules even in non-bootstrap mode, just to avoid peppering the
template with unnecessary "@if/@endif gcc-bootstrap" pairs.
(stage-[+prev+]-bubble): Remove.
* Makefile.def (Dependencies): Depend on all-build-bison,
all-build-flex, all-build-byacc, all-build-texinfo, rather
than the host variations.
* Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
with BUILD_SUBDIR.
(BISON): Update for recent Bisons.
(YACC): Fix typo.
(cross): Depend on all-build.
(all): Do not depend on all-build.
(prebootstrap): Remove.
(dep-kind): Accept separate prefixes for MODULE and ON variables.
(Prebootstrap dependencies): Add them to the per-stage targets
and to all-prebootstrap.
* configure.in (build_configdirs): Always enable build_tools.
(BUILD_DIR_PREFIX): Remove.
* Makefile.def (gcc): Add target variable.
(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
in the recursive `make', instead of hardwiring `all'.
(Autogenerated TARGET-* variables): New.
|
|
* configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
(instead of FreeBSD).
* configure: Regenerate.
|
|
references to tix.
* Makefile.in, configure: Regenerate.
|
|
2004-08-09 Mark Mitchell <mark@codesourcery.com>
* configure.in (arm*-*-eabi*): New target.
* configure: Regenerate.
2004-08-03 Paul Brook <paul@codesourcery.com>
* configure.in: Check for MPFR as well as GMP.
* configure: Regenerate.
|
|
target-libiberty to noconfigdirs.
|
|
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
config/ChangeLog:
2004-08-01 Robert Millan <robertmh@gnu.org>
* mt-linux: Rename to ...
* mt-gnu: ... this.
|
|
* configure.in: Add noconfigdirs for crx-*-*.
* configure: Regenerate.
2004-07-09 Loren J. Rittle <ljrittle@acm.org>
* configure.in: Build libmudflap by default on FreeBSD.
* configure: Regenerated.
2004-07-09 Mark Mitchell <mark@codesourcery.com>
* configure.in: Do not build libmudflap by default on non-GNU/Linux
systems.
* configure: Regenerated.
2004-07-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
2004-07-05 Phil Edwards <phil@codesourcery.com>
* configure.in: Do not prepend $srcdir to /dev/null in
makefile fragments.
* configure: Regenerate.
|
|
|
|
|
|
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
|
|
* configure: Regenerate.
|
|
|
|
directory is missing. Emit warning instead.
* configure: Regenerate.
|
|
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
|
|
gcc.
* configure: Regenerate.
|
|
* configure.in: Remove new- prefix from toplevel
bootstrap targets.
* configure: Regenerate.
|
|
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
* configure: Regenerate.
|
|
* configure.in: Test the ability to symlink directories.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): New definitions.
* Makefile.tpl (configure-stage1-gcc,
configure-stage2-gcc, configure-stage3-gcc,
all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
new-restage3, compare): Autogenerate, see Makefile.in
entry for behavioral changes.
(distclean-stage1, new-stage1-start, new-stage1-end,
new-stage1-bubble, distclean-stage2, new-stage2-start,
new-stage2-end, new-stage2-bubble, distclean-stage3,
new-stage3-start, new-stage3-end): New autogenerated targets.
(objext, prebootstrap, BOOT_CFLAGS,
POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
targets.
* Makefile.in: Regenerate.
(distclean-stage1, new-stage1-start, new-stage1-end,
new-stage1-bubble, distclean-stage2, new-stage2-start,
new-stage2-end, new-stage2-bubble, distclean-stage3,
new-stage3-start, new-stage3-end): New targets.
(all-stage1-gcc): Move prebootstrap dependency from here...
(configure-stage1-gcc): ...to here.
(new-bootstrap): Use bubble targets.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
Use per-stage distclean targets.
(configure-stage1-gcc, configure-stage2-gcc,
configure-stage3-gcc, all-stage1-gcc,
all-stage2-gcc, all-stage3-gcc, new-bootstrap):
Use new-stageN-start to prepare the tree.
|
|
* Makefile.def (host_modules): add libcpp.
* Makefile.tpl: Add dependencies on and for libcpp.
* Makefile.in: Regenerate.
* configure.in: Add libcpp host module.
* configure: Regenerate.
config/ChangeLog:
2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_HEADER_STDBOOL, ACX_HEADER_STRING):
From gcc.
|
|
* Makefile.tpl: Whenever a recursive target is defined, wrap
it in a special @if/@endif block, and prepare its maybe
dependency in the @if/@endif block
* configure.in: Instead of writing maybe dependencies, remove
the @if/@endif statements, and remove the @if/@endif blocks
that remain.
* configure: Regenerate.
* Makefile.in: Regenerate.
|