aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2018-06-29Introduce @unless/@endunless and postbootstrap Makefile targetsAlexandre Oliva1-5/+15
This patch turns dependencies of non-bootstrap targets on bootstrap targets for bootstrap builds into dependencies on stage_last. This arrangement gets stage1-bubble to run from stage_last if we haven't started a bootstrap yet, and to use the current stage otherwise. This was already the case of target libs, just not of non-bootstrapped host modules. In order to retain preexisting dependencies in non-bootstrap builds, or in gcc-less builds, this introduces support for @unless/@endunless pairs in Makefile.in. There is a remaining possibility of problem if activating, in a tree configured for bootstrap, a parallel build of two or more modules, at least one bootstrapped and one not. In this case, make might decide to build stage_current and stage_last in parallel, the latter will start a submake to build stage1 while the initial make, having satisfied stage_current, proceeds to build the bootstrapped module in non-bootstrapped configurations. The two builds will overlap and will likely conflict. This situation does NOT arise in normal settings, however: a post-bootstrap build of all-host all-target will indeed activate such targets concurrently, but only after building all bootstrapped modules successfully, and it will have both stage_last and stage_current targets already satisfied, so the potential race between builds will not arise. Another remaining problem, that is slightly expanded with this patch, is that of an interrupted build in a tree configured for bootstrap, continued with a non-bootstrapped target. Target modules that were not bootstrapped would already fail to complete the current stage when activated explicitly in the command line for a retry; host modules, however, would attempt to build their bootstrapped dependencies, which is what led to the problem of concurrent builds addressed with this patch. An interrupted or failed build might still recover correctly, if the non-bootstrapped target is activated in both builds, because then make will remove stage_last when its build command is interrupted, so that it will attempt to recreate it with stage1-bubble in the second try. A bootstrap build, however, will not be attempting to build stage_last, so the file will remain and the retry won't go through stage1-bubble. We have lived with that for target modules, so we can probably live with that for host modules too. Another undesirable consequence of this change is that non-boostrapped host modules, in a tree configured for bootstrap, when activated as make all-<module>, will build all of stage1 instead of only the module's usual dependencies. This is intentional and necessary to fix the parallel-build problem. If it's not desirable, disabling the unnecessary bootstrap configuration will suffice to restore the original set of dependencies. for ChangeLog * configure.ac: Introduce support for @unless/@endunless. * Makefile.tpl (dep-kind): Rewrite with cond; return postbootstrap in some cases. (make-postboot-dep, postboot-targets): New. (dependencies): Do not output postbootstrap dependencies at first. Output non-target ones changed for configure to depend on stage_last @if gcc-bootstrap, and the original deps @unless gcc-bootstrap. * configure.in, Makefile.in: Rebuilt.
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-3/+2
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-18configure.ac: Sync with GCCSimon Marchi1-27/+0
Here's an extra one... I'll need to make some changes to the root configure.ac. This patch makes sure it is in sync with GCC first. ChangeLog: * configure.ac: Sync with GCC, remove MPX-related things.
2018-05-01Add the Netronome Flow Processor as a build target to the top-level ↵Francois H. Theron1-0/+4
configure.ac file. * configure.ac: Added "nfp" target. * configure: Regenerate.
2018-02-13WebAssembly: Disable subdirectory configuration for unsupported LDMaciej W. Rozycki1-0/+3
Remove an LD subdirectory configuration error: *** ld does not support target wasm32-unknown-none *** see ld/configure.tgt for supported targets make[1]: *** [configure-ld] Error 1 which prevents binutils for the WebAssembly target from being built unless an explicit `--disable-ld' configuration option has been given. Users must not have to disable features selected by default to get a working configuration. / * configure.ac <wasm32-*-*> (noconfigdirs): Add `ld'. * configure: Regenerate.
2018-01-10Update top level configure files by synchronizing them with gcc.Nick Clifton1-93/+123
. * config-ml.in: Sync with gcc sources. * config.guess: Likewise. * config.sub: Likewise. * configure.ac: Likewise. * configure: Regenerate. config * Sync with GCC sources: 2017-11-14 Boris Kolpackov <boris@codesynthesis.com> * gcc-plugin.m4: Add support for MinGW. 2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * cet.m4: New file. 2017-11-15 Alexandre Oliva <aoliva@redhat.com> * bootstrap-debug-lean.mk (do-compare): Use the contrib/compare-debug script. 2017-10-24 H.J. Lu <hongjiu.lu@intel.com> * bootstrap-cet.mk: New file. 2017-06-19 Martin Liska <mliska@suse.cz> * bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages. * bootstrap-lto.mk: Likewise. 2017-06-03 Eric Botcazou <ebotcazou@adacore.com> * mt-android: New file. 2017-02-13 Richard Biener <rguenther@suse.de> * isl.m4: Remove support for ISL 0.14. 2017-01-19 Uros Bizjak <ubizjak@gmail.com> PR target/78478 * ax_check_define.m4: New file. 2017-01-17 Jakub Jelinek <jakub@redhat.com> PR other/79046 * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. 2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> PR go/78978 * hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
2017-12-12Add gdb for or1k buildStafford Horne1-7/+0
* ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> * configure.ac: Remove logic adding gdb to noconfigsdirs for or1k. * configure: Regenerate. Cc: gcc-patches@gcc.gnu.org
2017-01-23Sync top-level make and configure files with FSF GCC mainline versions.Nick Clifton1-191/+86
* configure.ac: Update year in copyright notice. Sync from FSF GCC mainline, bringing in the following patches. * Makefile.def: Likewise. * Makefile.tpl: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. 2016-12-21 Jakub Jelinek <jakub@redhat.com> * configure.ac: Don't bootstrap libmpx unless --with-build-config includes bootstrap-mpx. 2016-12-01 Matthias Klose <doko@ubuntu.com> * configure.ac: Don't use pkg-config to check for bdw-gc. 2016-11-30 Matthias Klose <doko@ubuntu.com> * Makefile.def: Remove reference to boehm-gc target module. * configure.ac: Include pkg.m4, check for --with-target-bdw-gc options and for the bdw-gc pkg-config module. 2016-11-15 Matthias Klose <doko@ubuntu.com> * config-ml.in: Remove references to GCJ. * configure.ac: Likewise. 2016-09-30 Jakub Jelinek <jakub@redhat.com> * configure.ac: Add target-libffi to target_libraries. Readd libgcj target disablings, modified to only target-libffi. Readd target addition of go to unsupported languages. 2016-09-30 Andrew Haley <aph@redhat.com> * Makefile.def: Remove libjava. * Makefile.tpl: Likewise. * configure.ac: Likewise. 2016-09-26 Anton Kolesov <Anton.Kolesov@synopsys.com> * configure.ac: Disable "sim" directory for arc*-*-*. 2016-09-12 Maciej W. Rozycki <macro@imgtec.com> * configure.ac: Check for the minimum in-tree MPFR version handled.
2016-12-02Add support for Fushia OS.Josh Conner1-1/+1
* configure.ac: Add fuchsia to targets that use ELF. * configure: Regenerated. bfd * configure.tgt: Add support for fuchsia (OS). gas * configure.tgt: Add support for fuchsia (OS). ld * Makefile.am: Add dependency information for earmelf_fuchsia.c. * Makefile.in: Regenerate. * configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and x86_64-*-fuchsia* targets. * emulparams/armelf_fuchsia.sh: New file. * emulparams/armelfb_fuchsia.sh: New file.
2016-07-20Enable the configuration of GDB for the NDS32 target.Yan-Ting Lin1-3/+0
* configure.ac (nds32*-*-*): Remove entry to enable gdb. * configure: Regenerated.
2016-06-28[TILEPro] Don't build gdbWalter Lee1-1/+4
In configure.ac, add gdb to noconfigdirs for TILEPro. * configure.ac (tilepro-*-*): Add gdb to noconfigdirs. * configure: Regenerate.
2016-03-17Add mips and s390 build targets for gold.Cary Coutant1-1/+1
* configure.ac: Add mips and s390 to the gold target check. * configure: Regenerate.
2016-02-10Sync top level files with gcc.Nick Clifton1-3/+3
Import these patches from the GCC mainline: 2016-01-12 Andris Pavenis <andris.pavenis@iki.fi> * configure.ac: Enable LTO for DJGPP * configure: Regenerate 2016-01-24 Mikhail Maltsev <maltsevm@gmail.com> PR bootstrap/69329 * Makefile.tpl (BASE_FLAGS_TO_PASS): Add LSAN_OPTIONS. * Makefile.in: Regenerate. 2016-01-25 Aditya Kumar <aditya.k7@samsung.com> Sebastian Pop <s.pop@samsung.com> * Makefile.in: Regenerate. * Makefile.tpl: Export ISLVER. * configure: Regenerate. * config/isl.m4: Detect isl-0.15. 2016-01-29 Sebastian Pop <s.pop@samsung.com> * config/isl.m4: Add comments about isl-0.16. * configure: Regenerate.
2016-01-11Import changes made to files shared with the FSF GCC project.Nick Clifton1-10/+8
Import the following changes from the GCC mainline: 2015-11-13 Tsvetkova Alexandra <aleksandra.tsvetkova@intel.com> * configure.ac: Enable libmpx by default. * configure: Regenerated. 2015-11-19 Martin Liska <mliska@suse.cz> * .gitignore: Add .clang-format to ignored files. * Makefile.tpl: Add clang-format. * Makefile.in: Regenerate. 2015-12-01 Andreas Tobler <andreast@gcc.gnu.org> PR libffi/65726 * Makefile.def (lang_env_dependencies): Make libffi depend on cxx. * Makefile.in: Regenerate. 2015-12-02 Ian Lance Taylor <iant@google.com> PR go/66147 * Makefile.tpl (HOST_EXPORTS): Add XGCC_FLAGS_FOR_TARGET. * Makefile.in: Regenerate. 2015-12-17 Nathan Sidwell <nathan@acm.org> * config/isl.m4 (ISL_CHECK_VERSION): Add gmp libs. * configure: Regenerate. 2015-12-17 Sebastian Pop <s.pop@samsung.com> * Makefile.in: Replace ISL with isl. * Makefile.tpl: Same. * config/isl.m4: Same. * configure.ac: Same. * contrib/download_prerequisites: Same. * configure: Regenerate. 2016-01-01 Ben Elliston <bje@gnu.org> * config.guess: Import version 2016-01-01. * config.sub: Likewise. include 2016-01-07 Mike Frysinger <vapier@gentoo.org> * longlong.h: Change !__SHMEDIA__ to (!defined (__SHMEDIA__) || !__SHMEDIA__). Change __SHMEDIA__ to defined (__SHMEDIA__) && __SHMEDIA__.
2015-11-20binutils: add support for arm-*-darwin and aarch64-*-darwin.Tristan Gingold1-0/+8
Currently only in bfd and binutils. ChangeLog/ * configure.ac: Add aarch64-*-darwin* and arm-*-darwin*. * configure: Regenerate. bfd/ChangeLog/ * targets.c (aarch64_mach_o_vec, arm_mach_o_vec): Declare. (_bfd_target_vector): Add new vectors. * reloc.c (BFD_RELOC_MACH_O_SUBTRACTOR32) (BFD_RELOC_MACH_O_SUBTRACTOR64, BFD_RELOC_MACH_O_ARM64_ADDEND) (BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21) (BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12) (BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT): New relocations. (BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32) (BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64): Remove. * mach-o-x86-64.c (bfd_mach_o_x86_64_swap_reloc_out): Change name of subtractor relocations. * config.bfd: Handle aarch64-*-darwin*, arm-*-darwin*. * Makefile.am (BFD32_BACKENDS): Add mach-o-arm.lo. (BFD32_BACKENDS_CFILES): Add mach-o-arm.c. (BFD64_BACKENDS): Add mach-o-aarch64.lo. (BFD64_BACKENDS_CFILES): Add mach-o-aarch64.c. * configure.ac: Handle aarch64_mach_o_vec and arm_mach_o_vec. * mach-o-aarch64.c: New file. * mach-o-arm.c: New file. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate.
2015-10-21Reset x86 Linux targets to not compressing debug sections by default. ↵Nick Clifton1-1/+1
Enable compression of debug sections by default in the linker, if so configured. PR gas/19109 . * configure.ac: Note the 'none' is an acceptable argument to --enable-compressed-debug-sections. * configure: Regenerate. gas * configure.ac: Restore --enable-compressed-debug-sections. Do not enable compressed debug sections by default for x86 Linux targets. * configure: Regenerate. ld * configure.ac: Add --enable-compressed-debug-sections. * configure: Regenerate. * config.in: Regenerate. * ld.texinfo: Document how to determine the default action for debug sections. * ldmain.c (main): If DEFAULT_FLAG_COMPRESS_DEBUG is defined then set the compress_debug field of the link_info structure to zlib-gabi. * lexsup.c (elf_static_list_options): Output the default setting for the --compress-debug-sections option. * NEWS: Mention the new configure option.
2015-10-20Add --enable-compressed-debug-sections={all,gas,gold,ld}H.J. Lu1-0/+13
This patch removes the gas configure option: --enable-compressed-debug-sections and adds a toplevel configure option: --enable-compressed-debug-sections={all,gas,gold,ld} to enable compressed debug sections for gas, gold or ld by default. At the moment, this configure option is ignored by gold and ld. For x86 Linux targets, default to compressing debug sections in gas. PR gas/19109 * configure.ac: Add --enable-compressed-debug-sections={all,gas,gold,ld}. * configure: Regenerated. gas/ PR gas/19109 * NEWS: Update --enable-compressed-debug-sections=. * configure.ac: Remove --enable-compressed-debug-sections. (DEFAULT_FLAG_COMPRESS_DEBUG): Check --enable-compressed-debug-sections={all,gas} instead of --enable-compressed-debug-sections. For x86 Linux targets, default to compressing debug sections. * configure: Regenerated.
2015-09-30Resync files in the binutils repository that are maintained in the gcc ↵Nick Clifton1-19/+6
repository. . 2015-08-23 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR libfortran/54572 * Makefile.def: Make libgfortran depend on libbacktrace. * Makefile.in: Regenerate. 2015-08-12 Tom de Vries <tom@codesourcery.com> PR other/67092 PR other/67098 * configure.ac: Remove --with_host_libstdcxx support. * configure: Regenerate. 2015-08-10 Thomas Schwinge <thomas@codesourcery.com> Jakub Jelinek <jakub@redhat.com> * configure.ac (noconfigdirs): Don't add "target-libgomp" for target nvptx*-*-*. * configure: Regenerate. include 2015-08-14 Pierre-Marie de Rodat <derodat@adacore.com> * dwarf2.def (DW_AT_GNU_bias): New attribute. 2015-08-14 Pierre-Marie de Rodat <derodat@adacore.com> * dwarf2.def (DW_AT_GNU_numerator, DW_AT_GNU_denominator): New attributes. libiberty 2015-08-15 Ian Lance Taylor <iant@google.com> * cp-demangle.c (d_abi_tags): Preserve di->last_name across any ABI tags.
2015-07-27Sync toplevel files with GCCH.J. Lu1-4/+4
Sync with GCC 2015-07-24 Michael Darling <darlingm@gmail.com> PR other/66259 * config-ml.in: Reflects renaming of configure.in to configure.ac * configure: Likewise * configure.ac: Likewise
2015-07-14Sync toplevel configure with GCCH.J. Lu1-0/+3
Sync with GCC 2015-05-16 James Bowman <james.bowman@ftdichip.com> * configure.ac: FT32 target added. * configure: Regenerate.
2015-07-14Sync toplevel configure.ac with GCCH.J. Lu1-4/+26
Sync with GCC 2015-06-02 Jason Merrill <jason@redhat.com> PR bootstrap/66319 * configure.ac: Use -std=gnu++98. 2015-05-28 Mike Frysinger <vapier@gentoo.org> * configure.ac (--vtable-verify): Use AS_HELP_STRING for help. * configure: Regenerate. 2015-05-11 Paulo Matos <paulo@matos-sorge.com> * configure.ac: Fix typo. * configure: Regenerate. 2015-05-03 Matthias Klose <doko@ubuntu.com> * configure.ac: Match $host configured with triplets. * configure: Regenerate. 2015-04-17 Jakub Jelinek <jakub@redhat.com> PR bootstrap/62077 * configure.ac (--enable-stage1-checking): Default to release,misc,gimple,rtlflag,tree,types if --disable-checking or --enable-checking is not specified and DEV-PHASE is not experimental. * configure: Regenerated. 2015-03-27 Uros Bizjak <ubizjak@gmail.com> Install back PR target/47230 fix (Revert the revert). config/ Sync with GCC * mh-alpha-linux: Restored.
2015-06-30Sync toplevel configure with gccH.J. Lu1-1/+1
* configure.ac (ospace_frag): Enable for i?86*-*-elfiamcu target. * configure: Regenerate.
2015-05-13Disable the configuration of GDB for HPUX targets.John David Anglin1-4/+7
* configure.ac: Disable configuration of GDB for HPUX targets. * configure: Regenerate.
2015-05-01Configure zlib with --enable-host-shared for shared bfdH.J. Lu1-0/+9
When bfd is configured as a shared library, we need to configure zlib with --enable-host-shared since zlib is used by bfd. PR ld/18355 * Makefile.def: Add extra_configure_flags to host zlib. * configure.ac (extra_host_zlib_configure_flags): New. Set to --enable-host-shared When bfd is to be built as shared library. AC_SUBST. * Makefile.in: Regenerated. * configure: Likewise.
2015-04-01Add --with-system-zlib to top level configureH.J. Lu1-0/+2
The top level configure supports --with-system-zlib. This patch makes configure --help to display --with-system-zlib. * configure.ac: Add --with-system-zlib. * configure: Regenerated.
2015-03-17Exclude target-zlib if target-libjava isn't builtH.J. Lu1-3/+9
* configure.ac (target_configdirs): Exclude target-zlib if target-libjava isn't built. * configure: Regenerated.
2015-03-16Update top-level files from GCC trunkH.J. Lu1-82/+245
* Makefile.def: Updated from GCC trunk. * Makefile.tpl: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerated. * configure: Likewise.
2015-03-16Disable all target libraries if not building gccH.J. Lu1-0/+3
Don't build target libraries if not building gcc. * configure.ac (target_configdirs): Unset if not building gcc. * configure: Regenerated.
2015-01-28FT32 initial supportAlan Modra1-0/+6
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-14Don't disable gprof for moxieAnthony Green1-1/+1
2015-01-03[GCC bug #63539]: libgo does not use the newly built objcopy when doing a ↵Andrew Pinski1-0/+2
combined build 2015-01-03 Andrew Pinski <apinski@cavium.com> * Makefile.def (flags_to_pass): Pass OBJCOPY_FOR_TARGET also. * Makefile.tpl (HOST_EXPORTS): Add OBJCOPY_FOR_TARGET. (BASE_TARGET_EXPORTS): Add OBJCOPY. (OBJCOPY_FOR_TARGET): New variable. (EXTRA_TARGET_FLAGS): Add OBJCOPY. * Makefile.in: Regenerate. * configure.ac: Check for already installed target objcopy. Also GCC_TARGET_TOOL on objcopy. * configure: Regenerate.
2014-10-03Add aarch64 to list of targets that support gold.Jing Yu1-1/+2
This patch was committed to GCC trunk as revision 215865. 2014-10-03 Jing Yu <jingyu@google.com> * configure.ac: Add aarch64 to list of targets that support gold. * configure: Regenerate.
2014-09-12Add mips*-img-elf* target triple.Andrew Bennett1-2/+2
/ * configure.ac: Add mips*-img-elf* target triple. * configure: Regenerate. bfd/ * config.bfd: Add mips*-img-elf* target triple. gas/ * configure.tgt: Add mips*-img-elf* target triple. gas/testsuite/ * gas/mips/mips.exp: Add mips*-img-elf* target triple. binutils/testsuite/ * binutils-all/objcopy.exp: Add mips*-img-elf* target triple. * binutils-all/readelf.exp: Likewise. ld/ * configure.tgt: Add mips*-img-elf* target triple. ld/testsuite/ * ld-mips-elf/mips-elf.exp: Add support for mips*-img-elf* target triple.
2014-09-10Disable gdb for nds32*-*-* until it is supported.Chung-Ju Wu1-0/+3
2014-07-27or1k: GDB not supported for or1k*-*-rtems*Joel Sherrill1-0/+4
* configure.ac (or1k*-*-rtems*): gdb not supported. The ordering of the stanzas results in this not being caught by or1k*-*-* later. * configure. Regenerated. Signed-off-by: Christian Svensson <blue@cmd.nu>
2014-07-22Disable gdb for or1k*-*-* until supportedJoel Sherrill1-0/+3
* configure.ac (or1k*-*-*): Disable gdb. * configure: Regenerated. Signed-off-by: Christian Svensson <blue@cmd.nu>
2014-05-14Sync nios2 configure changes from GCC mainline.Sandra Loosemore1-0/+3
2014-05-14 Sandra Loosemore <sandra@codesourcery.com> * configure.ac (target_makefile_frag): Set for nios2-*-elf*. * configure: Regenerated. config/ * mt-nios2-elf: New file.
2014-05-08PR sanitizer/56781 * Makefile.def: Set bootstrap=true; for host fixincludes. ↵jakub1-2/+8
* configure.ac: Don't bootstrap host fixincludes unless --with-build-config=bootstrap-{a,ub}san. * Makefile.in: Regenerated. * configure: Regenerated. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208842 138bc75d-0d04-0410-961f-82ee72b054a4
2014-05-08* configure.ac: Move BUILD_CONFIG set up earlier. Add --enable-vtable-verify ↵jakub1-49/+67
option parsing. Don't add target-libsanitizer to bootstrap_target_libs unless --with-build-config=bootstrap-asan or --with-build-config=bootstrap-ubsan. Don't add target-libvtv to bootstrap_target_libs unless --enable-vtable-verify. * configure: Regenerated. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208745 138bc75d-0d04-0410-961f-82ee72b054a4
2014-05-08TILE-Gx big endian support.walt1-1/+1
/: * configure.ac (tilepro-*-*) Change to tilepro*-*-*. (tilegx-*-*): Change to tilegx*-*-*. * configure: Regenerate. contrib/: * config-list.mk (LIST): Add tilegxbe-linux-gnu. libcpp/: * configure.ac: Change "tilepro" triplet to "tilepro*". * configure: Regenerate. libgcc/: * config.host: Support "tilegx*" and "tilepro*" triplets. * config/tilegx/sfp-machine32.h (__BYTE_ORDER): Handle big endian. * config/tilegx/sfp-machine64.h (__BYTE_ORDER): Handle big endian. gcc/: * config.gcc (tilepro-*-*): Change to tilepro*-*-*. (tilegx-*-linux*): Change to tilegx*-*-linux*; Support tilegxbe triplet. * common/config/tilegx/tilegx-common.c (TARGET_DEFAULT_TARGET_FLAGS): Define. * config/tilegx/linux.h (ASM_SPEC): Add endian_spec. (LINK_SPEC): Ditto. * config/tilegx/sync.md (atomic_test_and_set): Handle big endian. * config/tilegx/tilegx.c (tilegx_return_in_msb): New. (tilegx_gimplify_va_arg_expr): Handle big endian. (tilegx_expand_unaligned_load): Ditto. (tilegx_expand_unaligned_store): Ditto. (TARGET_RETURN_IN_MSB): New. * config/tilegx/tilegx.h (TARGET_DEFAULT): New. (TARGET_ENDIAN_DEFAULT): New. (TARGET_BIG_ENDIAN): Handle big endian. (BYTES_BIG_ENDIAN): Ditto. (WORDS_BIG_ENDIAN): Ditto. (FLOAT_WORDS_BIG_ENDIAN): Ditto. (ENDIAN_SPEC): New. (EXTRA_SPECS): New. * config/tilegx/tilegx.md (extv): Handle big endian. (extzv): Ditto. (insn_st<n>): Ditto. (insn_st<n>_add<bitsuffix>): Ditto. (insn_stnt<n>): Ditto. (insn_stnt<n>_add<bitsuffix>):Ditto. (vec_interleave_highv8qi): Handle big endian. (vec_interleave_highv8qi_be): New. (vec_interleave_highv8qi_le): New. (insn_v1int_h): Handle big endian. (vec_interleave_lowv8qi): Handle big endian. (vec_interleave_lowv8qi_be): New. (vec_interleave_lowv8qi_le): New. (insn_v1int_l): Handle big endian. (vec_interleave_highv4hi): Handle big endian. (vec_interleave_highv4hi_be): New. (vec_interleave_highv4hi_le): New. (insn_v2int_h): Handle big endian. (vec_interleave_lowv4hi): Handle big endian. (vec_interleave_lowv4hi_be): New. (vec_interleave_lowv4hi_le): New. (insn_v2int_l): Handle big endian. (vec_interleave_highv2si): Handle big endian. (vec_interleave_highv2si_be): New. (vec_interleave_highv2si_le): New. (insn_v4int_h): Handle big endian. (vec_interleave_lowv2si): Handle big endian. (vec_interleave_lowv2si_be): New. (vec_interleave_lowv2si_le): New. (insn_v4int_l): Handle big endian. * config/tilegx/tilegx.opt (mbig-endian): New option. (mlittle-endian): New option. * doc/install.texi: Document tilegxbe-linux. * doc/invoke.texi: Document -mbig-endian and -mlittle-endian. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@208069 138bc75d-0d04-0410-961f-82ee72b054a4
2013-12-16* configure.ac: Add user-friendly check for native x86_64-linux multilibs. * ↵fxcoudert1-0/+20
configure: Regenerate. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@205975 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08Disable libcilkrts when C++ is not used.bviyer1-1/+1
2013-11-04 Balaji V. Iyer <balaji.v.iyer@intel.com> * configure.ac: Added libcilkrts to noconfig list when C++ is not supported. * configure: Regenerated. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204396 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08Added Cilk runtime library (libcilkrts) into GCC.bviyer1-0/+17
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204173 138bc75d-0d04-0410-961f-82ee72b054a4
2013-11-08* Makefile.def (target_modules): Remove libmudflap (languages): Remove ↵law1-17/+0
check-target-libmudflap). * Makefile.in: Rebuilt. * Makefile.tpl (check-target-libmudflap-c++): Remove. * configure.ac (target_libraries): Remove target-libmudflap. Remove checks which disabled libmudflap on some systems. * configure: Rebuilt. * libmudflap: Directory removed. * Makefile.in (C_COMMON_OBJS): Remove tree-mudflap. (OBJS): Remove tree-nomudflap.o (GTFILES): Remove tree-mudflap.c * builtins.c (expand_builtin_alloc): Remove mudflap support. * gcc.c (MFWRAP_SPEC, MFLIB_SPEC): Likewise. (mfwrap_spec, mflib_spec): Likewise. (cpp_unique_options, cc1_options, static_specs): Likewise. * gimplify (gimplify_vla_decl, build_va_arg_indirect_ref): Likewise. * passes.def: Likewise. * toplev.c (compile_file, process_options): Likewise. * tree-inline.c (copy_tree_r): Likewise. * tree-pass.,h (make_pass_mudflap_1, make_pass_mudflap_2): Likewise. * varasm.c (make_decl_rtl, make_decl_rtl_for_debug): Likewise. (build_constant_desc, output_constant_def_contents): Likewise. (categorize_decl_for_section): Likewise. * tree-mudflap.c: Removed. * tree-mudflap.h: Removed. * tree-nomudflap.c: Removed. * bfin/uclinux.h (MFWRAP_SPEC): Remove. * moxie/uclinux.h (MFWRAP_SPEC): Likewise. * rs6000/aix.h (MFWRAP_SPEC, MFLIB_SPEC): Likewise. * config/sol2.h (MFLIB_SPEC): Likewise. * doc/install.texi: Remove mudflap references. * doc/passes.texi: Similarly. * doc/sourcebuild.texi: Similarly. * doc/invoke.texi: Remove mudlfap related options. * c-family/c-common.c (c_define_builtins): Remove mudflap support. * c-family/c.opt: Ignore and warn for mudflap options. * g++.dg/torture/pr49309.C: Removed. * gcc.dg/dfp/pr35739.c: Removed. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204090 138bc75d-0d04-0410-961f-82ee72b054a4
2013-10-162013-10-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-0/+7
* configure.ac: Update from GCC. * configure: Regenerate.
2013-10-082013-10-08 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-1/+1
* configure.ac: Update from GCC. * configure: Regenerate.
2013-09-212013-09-21 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-0/+3
* configure.ac: Update from GCC. * configure: Regenerate.
2013-08-122013-08-12 Jan-Benedict Glaw <jbglaw@lug-owl.de>Jan-Benedict Glaw1-4/+26
* configure.ac: Sync with GCC repo. * Makefile.def: Ditto. * configure: Regenerate. * Makefile.in: Ditto.
2013-08-05Remove:Mike Stump1-7/+0
2013-07-10 Jack Howarth <howarth@bromo.med.uc.edu> PR target/57792 * configure.ac: Use --with-sysroot=\"`xcrun --show-sdk-path`\" on darwin13 and later. * configure: Regenerated.
2013-07-102013-07-10 Jack Howarth <howarth@bromo.med.uc.edu>Mike Stump1-0/+7
PR target/57792 * configure.ac: Use --with-sysroot=\"`xcrun --show-sdk-path`\" on darwin13 and later. * configure: Regenerated.
generated by cgit v1.1 at 2024-11-26 17:48:34 +0000