| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Given 32-bit pointers and a 64-bit bfd_size_type, it is relatively
easy to construct a value of augmentation_data_len (eg. 0x100000000)
that won't fail pointer checks but will print without bounds.
PR 24898
* dwarf.c (display_debug_frames): Use the read_cie check and error
for augmentation data length.
|
|
The actual args to this function are "pointers to pointers to
debug_info".
PR 24911
* dwarf.c (comp_addr_base): Dereference args.
|
|
PR 24909
PR 23499
* readelf.c (get_symbol_version_string): Set sym_info earlier.
|
|
PR 24767
* doc/binutils.texi (nm): Document the 'n' symbol type.
|
|
* docs/binutils.texi: Fixed notice message disassembler options
section of the man page.
|
|
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
|
|
The following tests fail on wince as they rely on mapping symbols to
give them a fixed order.
This skips them on platforms that don't have mapping symbols.
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
|
|
header is left justified.
PR 24887
binutils* readelf.c (process_notes_at): Left justify the "Data size"
column heading.
* testsuite/binutils-all/i386/empty.d: Adjust for new output format.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/pr21231a.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/shstk.d: Likewise.
* testsuite/binutils-all/note-2-32.d: Likewise.
* testsuite/binutils-all/note-2-64.d: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494a.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494c.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
* testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
* testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.d: Likewise.
ld * testsuite/ld-aarch64/bti-plt-2.d: Adjust for new output format
from readelf.
* testsuite/ld-aarch64/bti-plt-4.d: Likewise.
* testsuite/ld-aarch64/bti-plt-6.d: Likewise.
* testsuite/ld-aarch64/bti-plt-7.d: Likewise.
* testsuite/ld-aarch64/bti-warn.d: Likewise.
* testsuite/ld-aarch64/property-bti-pac1.d: Likewise.
* testsuite/ld-aarch64/property-bti-pac2.d: Likewise.
* testsuite/ld-aarch64/property-bti-pac3.d: Likewise.
* testsuite/ld-elf/x86-feature-1a.rd: Likewise.
* testsuite/ld-elf/x86-feature-1b.rd: Likewise.
* testsuite/ld-elf/x86-feature-1c.rd: Likewise.
* testsuite/ld-elf/x86-feature-1d.rd: Likewise.
* testsuite/ld-elf/x86-feature-1e.rd: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372a.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Likewise.
* testsuite/ld-i386/pr23486a.d: Likewise.
* testsuite/ld-i386/pr23486b.d: Likewise.
* testsuite/ld-i386/pr23486c.d: Likewise.
* testsuite/ld-i386/pr23486d.d: Likewise.
* testsuite/ld-i386/pr24322a.d: Likewise.
* testsuite/ld-i386/pr24322b.d: Likewise.
* testsuite/ld-i386/property-x86-3.d: Likewise.
* testsuite/ld-i386/property-x86-4a.d: Likewise.
* testsuite/ld-i386/property-x86-5.d: Likewise.
* testsuite/ld-i386/property-x86-cet1.d: Likewise.
* testsuite/ld-i386/property-x86-cet2a.d: Likewise.
* testsuite/ld-i386/property-x86-cet5a.d: Likewise.
* testsuite/ld-i386/property-x86-cet5b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-i386/property-x86-shstk1a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk1b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk2.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk4.d: Likewise.
* testsuite/ld-i386/property-x86-shstk5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/pr23372a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372a.d: Likewise.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23486a-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486a.d: Likewise.
* testsuite/ld-x86-64/pr23486b-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486b.d: Likewise.
* testsuite/ld-x86-64/pr23486c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486c.d: Likewise.
* testsuite/ld-x86-64/pr23486d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23486d.d: Likewise.
* testsuite/ld-x86-64/pr24322a-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322a.d: Likewise.
* testsuite/ld-x86-64/pr24322b-x32.d: Likewise.
* testsuite/ld-x86-64/pr24322b.d: Likewise.
* testsuite/ld-x86-64/pr24458a-x32.d: Likewise.
* testsuite/ld-x86-64/pr24458a.d: Likewise.
* testsuite/ld-x86-64/pr24458b-x32.d: Likewise.
* testsuite/ld-x86-64/pr24458b.d: Likewise.
* testsuite/ld-x86-64/pr24458c-x32.d: Likewise.
* testsuite/ld-x86-64/pr24458c.d: Likewise.
* testsuite/ld-x86-64/property-1.r: Likewise.
* testsuite/ld-x86-64/property-1a.r: Likewise.
* testsuite/ld-x86-64/property-2.r: Likewise.
* testsuite/ld-x86-64/property-2a.r: Likewise.
* testsuite/ld-x86-64/property-3.r: Likewise.
* testsuite/ld-x86-64/property-3a.r: Likewise.
* testsuite/ld-x86-64/property-4.r: Likewise.
* testsuite/ld-x86-64/property-4a.r: Likewise.
* testsuite/ld-x86-64/property-5.r: Likewise.
* testsuite/ld-x86-64/property-5a.r: Likewise.
* testsuite/ld-x86-64/property-6.r: Likewise.
* testsuite/ld-x86-64/property-7.r: Likewise.
* testsuite/ld-x86-64/property-7a.r: Likewise.
* testsuite/ld-x86-64/property-x86-3-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-3.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
* testsuite/ld-x86-64/property-x86-5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-5.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet1.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet2a.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet5a.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-cet5b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.
gas * testsuite/gas/i386/property-1.d: Adjust for new output format
from readelf.
* testsuite/gas/i386/property-2.d: Likewise.
* testsuite/gas/i386/x86-64-property-1.d: Likewise.
* testsuite/gas/i386/x86-64-property-2.d: Likewise.
|
|
support c99/c11.
* testsuite/gentestdlls.c (main): Move declaration of loop
variable outside of the for() statement.
|
|
When printing unknown note types, readelf prints the raw description
section byte-by-byte. However, it does not mask appropriately, e.g. it
prints the byte 'ba' as 'ffffffba'.
* readelf.c (process_note): Mask unknown description data bytes.
|
|
I noticed the test for overflow of amt = size * nmemb in get_data
wasn't effective. An obvious example of nmemb = 3 and size = half max
value overflows but doesn't result in amt < nmemb. This patch fixes
this problem and reports a size truncation or overflow rather than out
of memory in more cases.
* readelf.c (get_data): Improve overflow checks.
|
|
PR 24777
* doc/binutils.texi: Ensure consistent formating of title strings
for man pages. Extend the title of the size man page to be more
informative.
|
|
between targets which do not support the x86 PE format at all, and those that do support it, but which do not recognise the .NET assembly variants.
* testsuite/binutils-all/objdump.exp
(test_objdump_dotnet_assemblies): Fix test to distinguish errors
in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
introduced machine types.
* testsuite/gentestdlls.c (write_simple_dll): New function.
(main): Generate simple and Linux-specific variants of pei-i386
and pei-x86-64 files so both can be used by tests.
|
|
PR 24876
* readelf.c (dump_ia64_unwind): Check that buffer is large
enough for "stamp" before reading.
|
|
first note being a version note.
PR 24874
* objcopy.c (merge_gnu_build_notes): Do not insist on the first
note being a version note.
|
|
PR 24829
* readelf.c (apply_relocations): Catch potential integer overflow
whilst checking reloc location against section size.
|
|
PR 24871
* readelf.c (ABSADDR): Delete.
(dump_ia64_unwind): Expand ABSADDR. Check validity of info.section.
|
|
bfd/ChangeLog:
2019-07-22 Martin Liska <mliska@suse.cz>
PR 24768
* archive.c (_bfd_compute_and_write_armap): Come up with
report_plugin_err variable.
* bfd-in2.h (struct bfd): Add lto_slim_object flag.
* elf.c (struct lto_section): New.
(_bfd_elf_make_section_from_shdr): Parse content of
.gnu_lto_.lto section.
* elflink.c: Report error for a missing LTO plugin.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
binutils/ChangeLog:
2019-07-22 Martin Liska <mliska@suse.cz>
PR 24768
* nm.c (filter_symbols): Set report_plugin_err if
error is reported.
(display_rel_file): Report error for a missing LTO plugin.
gold/ChangeLog:
2019-07-22 Martin Liska <mliska@suse.cz>
PR 24768
* layout.h (class Layout): Add is_lto_slim_object and
set_lto_slim_object.
* object.cc (struct lto_section): Add lto_slim_object_.
(big_endian>::do_layout): Parse content of
.gnu_lto_.lto section.
(big_endian>::do_add_symbols): Report error for a missing
LTO plugin.
|
|
PR 24798
* dwarf.c (process_cu_tu_index): Avoid integer overflow on 64-bit
systems by casting ncols and nslots expressions to size_t. Display
number of columns and slots before giving up due to buffer overflow.
Use %u to display unsigned ints. Perform more pointer wrap tests.
|
|
|
|
as a string, if it is printable.
PR 24809
* dwarf.c (display_debug_names): Display the contents of the
augmentation string, if it is printable.
|
|
file.
PR 24837
* readelf.c (process_mips_specific): Check for buffer overflow
before reading reginfo information.
|
|
after dash prefixed options.
PR 13256
* ar.c (decode_options): Restart option scanning if no operation
is detected and argument remain to be scanned.
|
|
by the link following code.
PR 24818
* objdump.c (is_relocateable): Delete.
(load_specific_debug_section): Test the abfd for relocations
directly, rather than relying upon is_relocateable.
(dump_dwarf): Delete initlialization of is_relocateable.
|
|
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
|
|
* testsuite/binutils-all/objcopy.exp (elf64): Correct object
file used to set this variable.
|
|
with .NET Core 2.1.
include * coff/i386.h (IMAGE_FILE_MACHINE_NATIVE_APPLE_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_FREEBSD_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_LINUX_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_NETBSD_OVERRIDE): Define.
(I386_APPLE_MAGIC): Define.
(I386_FREEBSD_MAGIC): Define.
(I386_LINUX_MAGIC): Define.
(I386_NETBSD_MAGIC): Define.
(I386BADMAG): Extend macro to allow new magic numbers.
* coff/x86_64.h (IMAGE_FILE_MACHINE_NATIVE_APPLE_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_FREEBSD_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_LINUX_OVERRIDE): Define.
(IMAGE_FILE_MACHINE_NATIVE_NETBSD_OVERRIDE): Define.
(AMD64_APPLE_MAGIC): Define.
(AMD64_FREEBSD_MAGIC): Define.
(AMD64_LINUX_MAGIC): Define.
(AMD64_NETBSD_MAGIC): Define.
(AMD64BADMAG): Extend macro to allow new magic numbers.
bfd * coffcode.h (coff_set_arch_mach_hook): Handle I386_APPLE_MAGIC,
I386_FREEBSD_MAGIC, I386_LINUX_MAGIC, I386_NETBSD_MAGIC,
AMD64_APPLE_MAGIC, AMD64_FREEBSD_MAGIC, AMD64_LINUX_MAGIC,
AMD64_NETBSD_MAGIC.
* peXXigen.c: Add comment about source of .NET magic numbers.
binutils* Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects
(GENTESTDLLSPROG): Define.
(TEST_PROGS): Add GENTESTDLLSPROG.
* Makefile.in: Regenerate.
* testsuite/binutils-all/objdump.exp
(test_objdump_dotnet_assemblies): New proc.
Run the new proc.
* testsuite/gentestdlls.c: New source file.
|
|
corrupt ELF files.
PR 24708
* elf.c (_bfd_elf_slurp_version_tables): Check for an excessively
large version reference section.
* compress.c (bfd_get_full_section_contents): Check for an
uncompressed section whose size is larger than the file size.
|
|
the symbols in a malformed file.
PR 24707
* objdump.c (slurp_symtab): Fail with a helpful error message if
the symbol table is too large.
|
|
relocs, that a suitable error message is displayed.
PR 24703
binutils* bucomm.c (bfd_nonfatal): If no bfd error code has been set then
indicate this in the output.
(bfd_nonfatal_message): Likewise.
bfd * mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add error
messages for failures.
* mach-o.c (bfd_mach_o_canonicalize_relocs): Set an bfd error code
if returning an error value.
|
|
With my (oldish) gcc I'm seeing
.../binutils/readelf.c: In function dump_ctf_indent_lines:
.../binutils/readelf.c:13851: error: declaration of spaces shadows a global declaration
.../binutils/../include/libiberty.h:253: error: shadowed declaration is here
|
|
With my (oldish) gcc I'm seeing
.../binutils/objdump.c: In function dump_ctf_indent_lines:
.../binutils/objdump.c:3210: error: declaration of spaces shadows a global declaration
.../binutils/../include/libiberty.h:253: error: shadowed declaration is here
|
|
bfd/
* Makefile.in: Regenerate.
* configure: Regenerate.
binutils/
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
|
|
PR 24663
* readelf.c (process_netbsd_elf_note): Add support for
NT_NETBSD_PAX.
(process_note): Add support for PaX notes.
|
|
PR 24665
* readelf.c (get_netbsd_elfcore_note_type): Add support for SH
core notes.
|
|
PR 24664
* readelf.c (get_netbsd_elfcore_note_type): Add support for NetBSD
auxv notes.
|
|
PR 24662
* readelf.c (get_alpha_symbol_other): New function.
(get_symbol_other): Use for Alpha symbols.
(is_32bit_pcrel_reloc): Add R_VAX_PCREL32.
|
|
PR 24661
* readelf.c (decode_arm_unwind): Ensure that the local variable
'addr' is always initialised.
|
|
PR 24651
* strings.c (print_strings): Use %u to print unsigned values in
decimal.
|
|
PR 24649
* arsup.c (ar_open): Use asprintf in place of xmalloc and
sprintf.
|
|
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
|
|
- Use of nonportable <endian.h>
- Use of qsort_r
- Use of zlib without appropriate magic to pull in the binutils zlib
- Use of off64_t without checking (fixed by dropping the unused fields
that need off64_t entirely)
- signedness problems due to long being too short a type on 32-bit
platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be
used only for functions that return ctf_id_t
- One lingering use of bzero() and of <sys/errno.h>
All fixed, using code from gnulib where possible.
Relatedly, set cts_size in a couple of places it was missed
(string table and symbol table loading upon ctf_bfdopen()).
binutils/
* objdump.c (make_ctfsect): Drop cts_type, cts_flags, and
cts_offset.
* readelf.c (shdr_to_ctf_sect): Likewise.
include/
* ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset.
(ctf_id_t): This is now an unsigned type.
(CTF_ERR): Cast it to ctf_id_t. Note that it should only be used
for ctf_id_t-returning functions.
libctf/
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Use them.
(libctf_a_LIBADD): New, for LIBOBJS.
* configure.ac: Check for zlib, endian.h, and qsort_r.
* ctf-endian.h: New, providing htole64 and le64toh.
* swap.h: Code style fixes.
(bswap_identity_64): New.
* qsort_r.c: New, from gnulib (with one added #include).
* ctf-decls.h: New, providing a conditional qsort_r declaration,
and unconditional definitions of MIN and MAX.
* ctf-impl.h: Use it. Do not use <sys/errno.h>.
(ctf_set_errno): Now returns unsigned long.
* ctf-util.c (ctf_set_errno): Adjust here too.
* ctf-archive.c: Use ctf-endian.h.
(ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type,
cts_flags and cts_offset.
(ctf_arc_write): Drop debugging dependent on the size of off_t.
* ctf-create.c: Provide a definition of roundup if not defined.
(ctf_create): Drop cts_type, cts_flags and cts_offset.
(ctf_add_reftype): Do not check if type IDs are below zero.
(ctf_add_slice): Likewise.
(ctf_add_typedef): Likewise.
(ctf_add_member_offset): Cast error-returning ssize_t's to size_t
when known error-free. Drop CTF_ERR usage for functions returning
int.
(ctf_add_member_encoded): Drop CTF_ERR usage for functions returning
int.
(ctf_add_variable): Likewise.
(enumcmp): Likewise.
(enumadd): Likewise.
(membcmp): Likewise.
(ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t
when known error-free.
* ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions
returning int: use CTF_ERR for functions returning ctf_type_id.
(ctf_dump_label): Likewise.
(ctf_dump_objts): Likewise.
* ctf-labels.c (ctf_label_topmost): Likewise.
(ctf_label_iter): Likewise.
(ctf_label_info): Likewise.
* ctf-lookup.c (ctf_func_args): Likewise.
* ctf-open.c (upgrade_types): Cast to size_t where appropriate.
(ctf_bufopen): Likewise. Use zlib types as needed.
* ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions
returning int.
(ctf_enum_iter): Likewise.
(ctf_type_size): Likewise.
(ctf_type_align): Likewise. Cast to size_t where appropriate.
(ctf_type_kind_unsliced): Likewise.
(ctf_type_kind): Likewise.
(ctf_type_encoding): Likewise.
(ctf_member_info): Likewise.
(ctf_array_info): Likewise.
(ctf_enum_value): Likewise.
(ctf_type_rvisit): Likewise.
* ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and
cts_offset.
(ctf_simple_open): Likewise.
(ctf_bfdopen_ctfsect): Likewise. Set cts_size properly.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.h: Likewise.
* configure: Likewise.
|
|
PR 24627
binutils * readelf.c (process_version_sections): Add 0x prefix to address
display. Correct indentation.
ld * testsuite/ld-elf/ver_def.vd: Update expected output.
|
|
This changes s12z to use generic.em and genelf.em, which is more
suited to targets that use the generic linker hash table. A tweak or
two to some testsuite predicates then gives a clean testsuite result
on the target.
PR 24596
binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): Add
s12z to targets not supporting this feature.
ld/
* emulparams/m9s12zelf.sh (TEMPLATE_NAME): Set to generic.
(EXTRA_EM_FILE): Define to genelf.
* testsuite/lib/ld-lib.exp (uses_genelf): Add s12z.
|
|
Also support tcl procedure calls in the run_ld_link_tests and
run_ld_link_exec_tests optional "xfail" args. Implements "is_generic"
and renames "is_generic_elf" to "uses_genelf", then uses these procs
in lots of ld tests.
moxie-elf -FAIL: ld-elf/orphan3
mt-elf -FAIL: ld-elf/merge
s12z-elf -FAIL: ld-discard/extern
s12z-elf -FAIL: ld-discard/start
s12z-elf -FAIL: ld-discard/static
s12z-elf -FAIL: PR ld/21703
s12z-elf -FAIL: PR ld/21703 -r
s12z-elf -FAIL: Symbol flags copy
s12z-elf -FAIL: ld-elf/group1
s12z-elf -FAIL: ld-elf/group3b
s12z-elf -FAIL: ld-elf/group8a
s12z-elf -FAIL: ld-elf/group8b
s12z-elf -FAIL: ld-elf/group9a
s12z-elf -FAIL: ld-elf/group9b
s12z-elf -FAIL: ld-elf/linkonce2
s12z-elf -FAIL: ld-elf/merge2
s12z-elf -FAIL: ld-elf/merge3
s12z-elf -FAIL: ld-elf/pr12851
s12z-elf -FAIL: ld-elf/pr17550c
s12z-elf -FAIL: ld-elf/pr17550d
s12z-elf -FAIL: ld-elf/pr22677
s12z-elf -FAIL: ld-elf/pr22836-1a
s12z-elf -FAIL: ld-elf/pr22836-1b
s12z-elf -FAIL: ld-elf/warn1
s12z-elf -FAIL: ld-elf/warn3
binutils/
* testsuite/lib/binutils-common.exp (run_dump_test): Support
tcl procedures for xfail args.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Support procedure
calls in optional "xfail" args.
(run_ld_link_exec_tests): Likewise.
(is_generic): New.
(uses_genelf): Rename from is_generic_elf. Delete bogus semicolons.
* testsuite/ld-scripts/align.exp: Rename is_generic_elf call.
* testsuite/ld-elf/elf.exp: Use is_generic and uses_genelf. Delete
xfail_implib var.
* testsuite/ld-elf/sec64k.exp: Use is_generic.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-discard/extern.d: Use is_generic in xfail.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
* testsuite/ld-elf/attributes.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/merge2.d: Likewise.
* testsuite/ld-elf/merge3.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17550c.d: Likewise.
* testsuite/ld-elf/pr17550d.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr21562a.d: Likewise.
* testsuite/ld-elf/pr21562b.d: Likewise.
* testsuite/ld-elf/pr21562c.d: Likewise.
* testsuite/ld-elf/pr21562d.d: Likewise.
* testsuite/ld-elf/pr21562i.d: Likewise.
* testsuite/ld-elf/pr21562j.d: Likewise.
* testsuite/ld-elf/pr21562k.d: Likewise.
* testsuite/ld-elf/pr21562l.d: Likewise.
* testsuite/ld-elf/pr21562m.d: Likewise.
* testsuite/ld-elf/pr21562n.d: Likewise.
* testsuite/ld-elf/pr22677.d: Likewise.
* testsuite/ld-elf/pr22836-1a.d: Likewise.
* testsuite/ld-elf/pr22836-1b.d: Likewise.
* testsuite/ld-elf/warn3.d: Likewise.
* testsuite/ld-elf/warn1.d: Likewise and xfail sparc solaris
targets rather than notarget.
* testsuite/ld-elf/compressed1d.d: Use uses_genelf in xfail.
* testsuite/ld-elf/orphan-10.d: Likewise.
* testsuite/ld-elf/orphan-9.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.d: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr20528a.d: Likewise.
* testsuite/ld-elf/pr20528b.d: Likewise.
* testsuite/ld-elf/pr23658-1a.d: Likewise.
* testsuite/ld-elf/pr23658-1b.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise and xfail sparc solaris
targets rather than notarget.
* testsuite/ld-elf/merge.d: Correct ms1-*-* to mt-*-*.
|
|
top * src-release.sh (do_proto_toplev): Add libctf to list of
directories that can be disabled.
binutils* README-how-to-make-a-release: Add libctf to list of directories
that need updates in their ChangeLogs.
|
|
top * configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
|
|
|
|
This introduces CTF support for objdump and readelf. objdump has the
following new arguments:
--ctf=SECTION: display CTF in the given SECTION
--ctf-parent=SECTION: name of CTF section that is the parent of this section
readelf has the above, and these two as well:
--ctf-symbols=SECTION: name of symbol table section (optional)
--ctf-strings=SECTION: name of string table section (optional)
(objdump can always use BFD machinery to determine the applicable string
and symbol tables automatically, so these arguments are unnecessary.)
Nearly all the work is done by the ctf_dump machinery in libctf: most of
the remaining work is option-processing and section-reading, and thus is
different for objdump and readelf: the minimal amount of similar code
remaining is, in my view, too small to share, particularly given that
objdump uses ctf_bfdopen() and readelf uses ctf_simple_open() since it
doesn't have a bfd.
I am not particularly satisfied with the way resources are freed in
either of these (I was forced to do it at the top level, for lack of
anywhere else to free resources allocated during option processing), but
I can't see any better way to do it without introducing new
infrastructure for no other purpose.
There are essentially arbitrary ordering changes to the Makefile.in's
order of libtool-related stuff that I can't get rid of, but they have no
semantic effect. (It is possible that some hunks of these changes could
be dropped, but that seems a bit risky to me.)
binutils/
* objdump.c (ctf-api.h): New include.
(dump_ctf_section_info): New variable.
(dump_ctf_section_name): Likewise.
(usage): Describe new options.
(enum option_values): Add OPTION_CTF and OPTION_CTF_PARENT.
(main): Use them to add --ctf and --ctf-parent.
(read_section_stabs): Add new parameter, entsize_ptr.
(find_stabs_section): Adjust accordingly.
(make_ctfsect): New.
(dump_ctf_indent_lines): New.
(dump_ctf_archive_member): New.
(dump_ctf): New.
(dump_bfd): Call it. Free resources afterwards.
* readelf.c (ctf-api.h): New include.
(CTF_DUMP): New.
(static bfd_boolean do_ctf): Likewise.
(dump_ctf_parent_name): Likewise.
(dump_ctf_symtab_name): Likewise.
(dump_ctf_strtab_name): Likewise.
(OPTION_CTF_DUMP): Likewise.
(OPTION_CTF_PARENT): Likewise.
(OPTION_CTF_SYMBOLS): Likewise.
(OPTION_CTF_STRINGS): Likewise.
(options): Add them.
(usage): Likewise.
(parse_args): Handle the new options, requesting CTF_DUMP.
(process_section_contents): Handle CTF_DUMP.
(shdr_to_ctf_sect): New.
(dump_ctf_indent_lines): New.
(dump_section_as_ctf): New.
(main): Free resources.
* Makefile.am (LIBCTF): New variable.
(objdump_DEPENDENCIES): Use it.
(readelf_DEPENDENCIES): Likewise.
(objdump_LDADD): Likewise.
(readelf_LDADD): Likewise.
* aclocal.m4: Regenerated.
* Makefile.in: Likewise.
* doc/binutils.texi (objdump): Document the new options.
(readelf): Likewise.
* doc/ctf.options.texi: New.
* doc/Makefile.in: Regenerated.
* NEWS: Mention the new feature.
|
|
I noticed that one of the readelf errors stopped processing of further
group sections. This patch makes readelf continue on to other groups,
like it does with the other errors.
* readelf.c (process_section_groups): Continue processing groups
when sh_entsize exceeds group size.
|
