aboutsummaryrefslogtreecommitdiff
path: root/binutils
AgeCommit message (Collapse)AuthorFilesLines
2020-01-03Mach-O: misc build adjustmentsJan Beulich1-1/+1
Oldish gcc warns about local variables shadowing outer scope ones. Additionally %lx is not (always) suitable to print the result of bfd_get_32().
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov3-1785/+2110
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Re: Update year range in copyright notice of binutils filesAlan Modra1-0/+4
Add the ChangeLog entry.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra140-141/+141
2020-01-01ChangeLog rotationAlan Modra2-1513/+1527
2019-12-30Re: Revise sleb128 and uleb128 readerAlan Modra2-21/+28
A missing part of git commit cd30bcef4a685. * od-macho.c: Include elfcomm.h. (dump_dyld_info_rebase, dump_dyld_info_bind): Fix read_leb128 args. (dump_dyld_info_export_1, dump_segment_split_info): Likewise.
2019-12-23Fix build 32-bit-host build error last for last binutils/dwarf2.c change.Hans-Peter Nilsson2-1/+6
* dwarf.c (display_debug_lines_decoded): Cast printf parameter to format type to correct last change.
2019-12-23Revise sleb128 and uleb128 readerAlan Modra4-1065/+833
This patch catches and reports errors when reading leb128 values, addressing a FIXME in read_leb128. * dwarf.h (read_leb128): Update prototype. (report_leb_status): New inline function. (SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Define. * dwarf.c: Use above macros throughout file. Formatting. (read_leb128): Reorder params. Add status return param. Don't stop reading until finding terminator or end of data. Detect loss of significant bits. Sign extend only on terminating byte. (read_sleb128, read_uleb128): Delete functions. (SKIP_ULEB, SKIP_SLEB, READ_ULEB, READ_SLEB): Delete macros. (read_and_print_leb128): Rewrite. (process_extended_line_op): Return a size_t. Use size_t vars. Adjust to suit new macros. Add proper name size to "data" when processing DW_LNE_define_file. (process_abbrev_section): Adjust to suit new macros. (decode_location_expression, skip_attr_bytes): Likewise. (get_type_signedness): Likewise. (read_and_display_attr_value): Likewise. Consolidate block code. (process_debug_info): Adjust to suit new macros. (display_formatted_table, display_debug_lines_raw): Likewise. (display_debug_lines_decoded): Likewise. Properly check for end of DW_LNS_extended_op. (display_debug_macinfo): Adjust to suit new macros. (get_line_filename_and_dirname, display_debug_macro): Likewise. (display_view_pair_list): Likewise. Don't back off when hitting end of data. (display_loc_list): Adjust to suit new macros. (display_loclists_list, display_loc_list_dwo): Likewise. (display_debug_rnglists_list, read_cie): Likewise. (display_debug_frames): Likewise. * readelf.c: Use new ULEB macros throughout file. (read_uleb128): Delete. (decode_arm_unwind_bytecode): Use read_leb128. (decode_tic6x_unwind_bytecode): Likewise. (display_tag_value): Adjust to suit new macros. (display_arc_attribute, display_arm_attribute): Likewise. (display_gnu_attribute, display_power_gnu_attribute): Likewise. (display_s390_gnu_attribute, display_sparc_gnu_attribute): Likewise. (display_mips_gnu_attribute, display_tic6x_attribute): Likewise. (display_msp430x_attribute, display_msp430_gnu_attribute): Likewise. (display_riscv_attribute, process_attributes): Likewise.
2019-12-17Prefer object over notype symbols when disassemblingAlan Modra2-16/+47
Changing objdump disassembly output like this always requires some testsuite changes, with the avr and x64_64 changes simply due to picking up better symbols, the whole point of the patch. The mips changes are due to mips-sgi-irix changing STT_NOTYPE symbols to STT_OBJECT, which objdump now chooses in preference to script symbols. The problem is that objdump looks at the first symbol in the section being disassembled, and if object type, just dumps out bytes rather than disassembling. This results in new failures: FAIL: JAL overflow 2 FAIL: undefined weak symbol overflow FAIL: undefined weak symbol overflow (n32) FAIL: undefined weak symbol overflow (n64) So for mips-sgi-irix function symbols really do need to be function type. I fixed a few more than just the required minimum to avoid the above test fails. binutils/ * objdump.c (compare_section): New static var. (compare_symbols): Sort by current section only. Don't access symbol name out of bounds when checking for file symbols. Sort section symbols and object symbols. (find_symbol_for_address): Remove bogus debugging and section symbol test. (disassemble_data): Move symbol sort from here.. (disassemble_section): ..to here. Set compare_section. ld/ * testsuite/ld-avr/lds-mega.d: Adjust symbols to suit objdump change. * testsuite/ld-avr/lds-tiny.d: Likewise. * testsuite/ld-x86-64/load2.d: Likewise. * testsuite/ld-mips-elf/compact-eh1.s: Give function symbols function type. * testsuite/ld-mips-elf/compact-eh1a.s: Likewise. * testsuite/ld-mips-elf/compact-eh1b.s: Likewise. * testsuite/ld-mips-elf/compact-eh2.s: Likewise. * testsuite/ld-mips-elf/compact-eh3.s: Likewise. * testsuite/ld-mips-elf/compact-eh3a.s: Likewise. * testsuite/ld-mips-elf/eh-frame5.s: Likewise. * testsuite/ld-mips-elf/ehdr_start-new.s: Likewise. * testsuite/ld-mips-elf/ehdr_start-o32.s: Likewise. * testsuite/ld-mips-elf/emit-relocs-1a.s: Likewise. * testsuite/ld-mips-elf/jaloverflow-2.s: Likewise. * testsuite/ld-mips-elf/jaloverflow.s: Likewise. * testsuite/ld-mips-elf/mips16-call-global-1.s: Likewise. * testsuite/ld-mips-elf/mips16-intermix-1.s: Likewise. * testsuite/ld-mips-elf/mips16-pic-1b.s: Likewise. * testsuite/ld-mips-elf/mips16-pic-4c.s: Likewise. * testsuite/ld-mips-elf/no-shared-1-n64.s: Likewise. * testsuite/ld-mips-elf/no-shared-1-o32.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-1b.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-2a.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-3b.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-4b.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-5a.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-6-n32c.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-6-n64c.s: Likewise. * testsuite/ld-mips-elf/pic-and-nonpic-6-o32c.s: Likewise. * testsuite/ld-mips-elf/pie.s: Likewise. * testsuite/ld-mips-elf/relax-jalr.s: Likewise. * testsuite/ld-mips-elf/reloc-1a.s: Likewise. * testsuite/ld-mips-elf/reloc-2a.s: Likewise. * testsuite/ld-mips-elf/reloc-4.s: Likewise. * testsuite/ld-mips-elf/reloc-5.s: Likewise. * testsuite/ld-mips-elf/reloc-6b.s: Likewise. * testsuite/ld-mips-elf/textrel-1.s: Likewise. * testsuite/ld-mips-elf/undefweak-overflow.s: Likewise. * testsuite/ld-mips-elf/undefweak-overflow.d: Adjust.
2019-12-17Remove tic80 supportAlan Modra3-2/+6
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2019-12-11Make bfd_get_8 return a bfd_vma like other bfd_get_* functionsAlan Modra2-2/+8
And similarly for bfd_get_signed_8. bfd/ * libbfd.c (bfd_get_8): Return a bfd_vma. (bfd_get_signed_8): Return a bfd_signed_vma. * bfd-in2.h: Regenerate. binutils/ * od-xcoff.c (dump_dumpx_core): Adjust for bfd_h_get_8 change.
2019-12-10PR24960, Memory leak from disassemblerAlan Modra2-0/+6
PR 24960 include/ * dis-asm.h (disassemble_free_target): Declare. opcodes/ * disassemble.c (disassemble_free_target): New function. binutils/ * objdump.c (disassemble_data): Call disassemble_free_target.
2019-12-10Delete duplicate struct objdump_disasm_info fieldAlan Modra2-6/+12
objdump_disasm_info.sec duplicates disassemble_info.section * objdump.c (struct objdump_disasm_info): Delete "sec". (find_symbol_for_address): Use inf->section rather than aux->sec. (objdump_print_addr, disassemble_bytes): Likewise. (disassemble_section): Don't set aux->sec.
2019-12-08Optional matching for run_dump_testAlan Modra2-0/+23
This adds an alternative to using #... in dump files, useful where we only want to allow specific extra output. DW_CFA_nop in CIEs and FDEs to pad out to required alignment (larger for 64-bit than 32-bit) is an example where these optional match patterns are useful. binutils/ * testsuite/lib/binutils-common.exp (regexp_diff): Support #?REGEXP. ld/ * testsuite/ld-elf/eh4.d: Match optional padding DW_CFA_nop in FDEs. * testsuite/ld-elf/eh5.d: Likewise, and extra CIEs emitted on embedded targets.
2019-11-28binutils/gas/riscv: Add DWARF register numbers for CSRsAndrew Burgess2-3/+43
This commit gives DWARF register numbers to the RISC-V CSRs inline with the RISC-V ELF specification here: https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md The CSRs are defined being numbered from 4096 to 8191. This adds support to the assembler, required in order to reference CSRs in, for example .cfi directives. I have then extended dwarf.c in order to support printing CSR names in the dumped DWARF output. As the CSR name space is quite large and only sparsely populated, I have provided a new function to perform RISC-V DWARF register name lookup which uses a switch statement rather than the table base approach that other architectures use. Any CSR that does not have a known name will return a name based on 'csr%d' with the %d being replaced by the offset of the CSR from 4096. gas/ChangeLog: * config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR names too. * testsuite/gas/riscv/csr-dw-regnums.d: New file. * testsuite/gas/riscv/csr-dw-regnums.s: New file. binutils/ChangeLog: * dwarf.c (regname_internal_riscv): New function. (init_dwarf_regnames_riscv): Use new function. Change-Id: I3f70bc24fa8b3c75744e6775eeeb87db70c7ecfb
2019-11-28binutils: Make DWARF register name lookup be via a function pointerAndrew Burgess2-8/+51
Add a layer of indirection for DWARF register name lookup by introducing a function pointer. Right now all targets use the same table based implementation that they always have, however, this will change in a later commit. binutils/ChangeLog: * dwarf.c (typedef dwarf_regname_lookup_ftype): New typedef. (dwarf_regnames_lookup_func): New static global. (init_dwarf_regnames_i386): Set dwarf_regnames_lookup_func. (init_dwarf_regnames_iamcu): Likewise. (init_dwarf_regnames_x86_64): Likewise. (init_dwarf_regnames_aarch64): Likewise. (init_dwarf_regnames_s390): Likewise. (init_dwarf_regnames_riscv): Likewise. (init_dwarf_regnames_by_elf_machine_code): Reset dwarf_regnames_lookup_func to NULL. (init_dwarf_regnames_by_bfd_arch_and_mach): Likewise. (regname_internal_by_table_only): New function. (regname): Make use of dwarf_regnames_lookup_func. Change-Id: Ibbff61c0abea32927f35c9e478793039ab8bb57d
2019-11-28binutils: Make some functions static in dwarf.cAndrew Burgess3-12/+21
The architecture specific register name initialisation routines no longer need to be externally visible, so make them static. binutils/ChangeLog: * dwarf.c (init_dwarf_regnames_i386): Make static. (init_dwarf_regnames_iamcu): Make static. (init_dwarf_regnames_x86_64): Make static. (init_dwarf_regnames_aarch64): Make static. (init_dwarf_regnames_s390): Make static. (init_dwarf_regnames_riscv): Make static. * dwarf.h (init_dwarf_regnames_i386): Delete declaration. (init_dwarf_regnames_iamcu): Delete declaration. (init_dwarf_regnames_x86_64): Delete declaration. (init_dwarf_regnames_aarch64): Delete declaration. (init_dwarf_regnames_s390): Delete declaration. (init_dwarf_regnames_riscv): Delete declaration. Change-Id: I9e350f76f98f46e9e3dd88d502f2a2a83e44cb36
2019-11-28binutils: Add a new function to initialise DWARF register name stateAndrew Burgess4-36/+63
Adds a new API function init_dwarf_regnames_by_bfd_arch_and_mach to initialise the register name state from a BFD architecture and machine type. There should be no user visible changes after this commit. binutils/ChangeLog: * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): New function. * dwarf.h (init_dwarf_regnames_by_bfd_arch_and_mach): Declare. * objdump.c (dump_dwarf): Call new function instead of calling specific initialization routines. Restrucure so that eh_addr_size is still calculated correctly. Change-Id: I346d665d2079a18ec4d04bd41893d0e9dc05e4b3
2019-11-28binutils: Rename init_dwarf_regnamesAndrew Burgess4-3/+11
As part of a process to change how dwarf.c figures out the correct name for a register I wanted to clean up how we initialise the register name tracking state. As part of this I rename init_dwarf_regnames to init_dwarf_regnames_by_elf_machine_code, later commits will add a different entry point to initialise the register name state. There should be no user visible changes after this commit. binutils/ChangeLog: * dwarf.c (init_dwarf_regnames): Renamed to... (init_dwarf_regnames_by_elf_machine_code): ...this. * dwarf.h (init_dwarf_regnames): Renamed to... (init_dwarf_regnames_by_elf_machine_code): ...this. * readelf.c (process_file_header): Update call to use new name. Change-Id: Ic8d2ef5fb62a8590ecd8cbb7e6258e11c6263594
2019-11-28binutils: Be more forgiving of targets with large numbers of registersAndrew Burgess2-2/+8
Currently if a target has a large ( > 1024 ) number of registers then we get a warning when dumping the DWARF whenever a register over the 1024 limit is referenced, this occurs in dwarf.c:frame_need_space. This check was initially introduced to guard against corrupted DWARF referencing stupidly large numbers of registers. The frame_need_space function already has a check in place so that, if a target specifies a set of known DWARF register names then we must only reference a register within this set, it is only after this check that we check for the 1024 limit. What this means is that if a target DOES NOT define a set of known register names and if we reference more than 1024 registers frame_need_space will give a warning. If a target DOES define a set of known registers and there are more than 1024 defined registers, and we try to reference a register beyond 1024 we will again get an error. This second case feels wrong to me. My thinking is that if a target defines a set of registers then it is not unreasonable to assume the tools can cope with that number of registers. And so, if the target defines 2000 named DWARF registers, frame_need_space should allow access to all of these registers. If a target does not define a set of named registers then the 1024 limit should remain. This is pretty arbitrary, but we do need to have some limit in place I think, so for now that seems as good as any. This is an entirely theoretical fix - there are no targets that define such large numbers of registers, but while experimenting with adding support for RISC-V CSRs I ran into this issue and felt like it was a good improvement. binutils/ChangeLog: * dwarf.c (frame_need_space): Compare dwarf_regnames_count against 0, and only warn about large numbers of registers if the number is more than the dwarf_regnames_count. Change-Id: Ifac1a999ff0677676e81ee373c4c044b6a700827
2019-11-25Introduce new section flag: SEC_ELF_OCTETSChristian Eggers2-4/+14
All symbols, sizes and relocations in this section are octets instead of bytes. Required for DWARF debug sections as DWARF information is organized in octets, not bytes. bfd/ * section.c (struct bfd_section): New flag SEC_ELF_OCTETS. * archures.c (bfd_octets_per_byte): New parameter sec. If section is not NULL and SEC_ELF_OCTETS is set, one octet es returned [ELF targets only]. * bfd.c (bfd_get_section_limit): Provide section parameter to bfd_octets_per_byte. * bfd-in2.h: regenerate. * binary.c (binary_set_section_contents): Move call to bfd_octets_per_byte into section loop. Provide section parameter to bfd_octets_per_byte. * coff-arm.c (coff_arm_reloc): Provide section parameter to bfd_octets_per_byte. * coff-i386.c (coff_i386_reloc): likewise. * coff-mips.c (mips_reflo_reloc): likewise. * coff-x86_64.c (coff_amd64_reloc): likewise. * cofflink.c (_bfd_coff_link_input_bfd): likewise. (_bfd_coff_reloc_link_order): likewise. * elf.c (_bfd_elf_section_offset): likewise. (_bfd_elf_make_section_from_shdr): likewise. Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes, .debug*, .zdebug* and .note.gnu*. * elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter to bfd_octets_per_byte. * elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise. * elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise. * elf32-s12z.c (opru18_reloc): likewise. * elf32-sh.c (sh_elf_reloc): likewise. * elf32-spu.c (spu_elf_rel9): likewise. * elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise * elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise. (ppc64_elf_addr16_ha_reloc): likewise. (ppc64_elf_toc64_reloc): likewise. * elflink.c (bfd_elf_final_link): likewise. (bfd_elf_perform_complex_relocation): likewise. (elf_fixup_link_order): likewise. (elf_link_input_bfd): likewise. (elf_link_sort_relocs): likewise. (elf_reloc_link_order): likewise. (resolve_section): likewise. * linker.c (_bfd_generic_reloc_link_order): likewise. (bfd_generic_define_common_symbol): likewise. (default_data_link_order): likewise. (default_indirect_link_order): likewise. * srec.c (srec_set_section_contents): likewise. (srec_write_section): likewise. * syms.c (_bfd_stab_section_find_nearest_line): likewise. * reloc.c (_bfd_final_link_relocate): likewise. (bfd_generic_get_relocated_section_contents): likewise. (bfd_install_relocation): likewise. For section which have SEC_ELF_OCTETS set, multiply output_base and output_offset with bfd_octets_per_byte. (bfd_perform_relocation): likewise. include/ * coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN), (PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls. binutils/ * objdump.c (disassemble_data): Provide section parameter to bfd_octets_per_byte. (dump_section): likewise (dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set. gas/ * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str and .debug_ranges sections. * write.c (maybe_generate_build_notes): Set section flag SEC_OCTETS for .gnu.build.attributes section. * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if SEC_OCTETS is set. * symbols.c (resolve_symbol_value): Likewise. ld/ * ldexp.c (fold_name): Provide section parameter to bfd_octets_per_byte. * ldlang (init_opb): New argument s. Set opb_shift to 0 if SEC_ELF_OCTETS for the current section is set. (print_input_section): Pass current section to init_opb. (print_data_statement,print_reloc_statement, print_padding_statement): Likewise. (lang_check_section_addresses): Call init_opb for each section. (lang_size_sections_1,lang_size_sections_1, lang_do_assignments_1): Likewise. (lang_process): Pass NULL to init_opb.
2019-11-21PR273, SOM size -AAlan Modra3-3/+18
The SOM backend creates BFD sections for "spaces", and "sub-spaces". "sub-spaces" are what we normally think of as a section, "spaces" aggregate "sub-spaces". Thus it does not really make sense to include "spaces" for size -A since that would double count total size. It so happens that real sections ought to have at least one of the ALLOC and HAS_CONTENTS flags set, so this patch excludes "spaces" but excluding BFD sections with no flags set. PR 273 * size.c (sysv_internal_sizer, sysv_internal_printer): Exclude sections with no flag bits set. * testsuite/binutils-all/size.exp: Allow $CODE$ as a text section.
2019-11-21Fix potential buffer overrun in objcopy's note merging code.Nick Clifton2-3/+14
* objcopy.c (merge_gnu_build_notes): Allow for the possibility that the new notes might actually be larger than the original notes.
2019-11-21PR46, cygwin: FAIL: cdtest with -UrAlan Modra2-7/+15
See the comment in pe.sc to understand why ld -Ur won't work. PR 46 binutils/ * testsuite/lib/binutils-common.exp (is_pecoff_format): Rewrite with positive logic and add more target triples. ld/ * scripttempl/pe.sc: Comment on ld -Ur fail. Wrap .gcc_exc comment. * scripttempl/pep.sc: Likewise. * testsuite/ld-cdtest/cdtest.exp (test2): xfail for pe.
2019-11-19PR24499, ignore --add-gnu-debuglink for archivesAlan Modra2-0/+13
objcopy --add-gnu-debuglink=foo.a.dbg foo.a just doesn't make any sense. Who puts executables in archives? PR 24499 * objcopy.c (copy_file): Ignore --add-gnu-debuglink for archives.
2019-11-19PR24968, make objcopy use output ELF arch if -B not givenAlan Modra2-2/+16
This should make objcopy -B redundant for the common case of producing ELF output where the -O target defaults to the desired arch:mach. PR 24968 * objcopy.c (copy_object): For ELF output and non-ELF input without arch, take arch from output file if not given by -B. Don't bfd_get_arch_info when we already have iarch.
2019-11-19PR25191, internal error in _bfd_elf_set_section_contentsAlan Modra2-10/+24
This PR copies a fuzzed PE input file to ELF output, in the process confusing the ELF backend by copying COFF-only section flags to the output. SEC_COFF_SHARED has the same value as SEC_ELF_COMPRESS. One approach to fixing this problem is of course not to reuse flag bits, but we've run out. So this patch only copies section flags that are in the bfd_applicable_section_flags set when changing the flavour of the output file. PR 25191 * objcopy.c (is_nondebug_keep_contents_section): Use bfd_get_flavour. (copy_object): Likewise. (setup_section): Likewise. If flavour of input and output files differ, restrict section flags to the intersection of input and output bfd_applicable_section_flags.
2019-11-19Add space between program name and file for objcopy/strip/objdump messagesAlan Modra2-6/+11
The GNU coding standard does indicate there should be no space in messages like these, but we tend to put a space in all other messages. This patch cures the inconsistency in: $ binutils/strip-new -F elf32-little -N .text -o pr25200 pr25200.bin binutils/strip-new: pr25200: R_X86_64_PLT32 unsupported binutils/strip-new:pr25200: sorry, cannot handle this file * bucomm.c (bfd_nonfatal_message): Add a space between program name and file.
2019-11-18PR25198, use of out of date pointerAlan Modra2-2/+6
PR 25198 * prdbg.c (tg_start_class_type): Correct scope of idbuf.
2019-11-08PR25172, Wrong description of --stop-address=ADDR switchAlan Modra2-1/+6
PR 25172 * objdump.c (usage): Correct --stop-address description.
2019-11-07Allow the --output option of the "ar" prorgam to extract files to locations ↵Nick Clifton3-20/+25
outside of the current directory. * ar.c (open_output_file): Check for filename validity before prefixing with output directory. Display the constructed output filename if in verbose mode. (extract_file): Let open_output_file display the filename.
2019-11-07Fix bug merging notes with objcopy when no merging results in zeroes being ↵Nick Clifton2-15/+20
written back into the note section. * objcopy.c (copy_object): Skip note sections that do not have an output section. Always copy note sections, even if no changes are made.
2019-11-06Fix an off-by-one error in the IN_RANGE macro used by readelf. Add another ↵Christian Eggers2-3/+14
use of the macro. * readelf.c (IN_RANGE): Rename parameter OFF to NELEM. Add comment. Catch potential integer overflow and fix off by one error whilst checking reloc location against section size. (apply_relocations): Use IN_RANGE macro.
2019-11-04Implement objcopy/strip --keep-section=<sectionpattern>Fāng-ruì Sòng7-7/+73
llvm-objcopy and llvm-strip support an option --keep-section that keeps some sections from being removed. * objcopy.c (enum option_values): Add OPTION_KEEP_SECTION. (SECTION_CONTEXT_KEEP): Define. Adjust other SECTION_CONTEXT macros. (copy_usage): Describe --keep-section. (strip_usage): Likewise. (copy_main): Handle SECTION_CONTEXT_KEEP. (strip_main): Likewise. (is_strip_section_1): Likewise. * testsuite/binutils-all/objcopy.exp: Add tests. * testsuite/binutils-all/keep-section-1.d: New test driver file. * testsuite/binutils-all/keep-section-2.d: Likewise. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2019-10-30Update email address for Palmer Dabbelt.Nick Clifton2-1/+5
* MAINTAINERS: Change palmer@sifive.com to palmer@dabbelt.com.
2019-10-30Add a --output=<DIR> option to ar to allow the specifying of an output ↵Fangrui Song5-66/+171
directory. * ar.c (emum long option numbers): Declare. Use to provide numerical values for long options. (long_options): Add --output option. (usage): Mention the --output option. (open_output_file): New function. Create a filepath for an output file and open it. (extract_file): Use open_output_file(). (open_output_file): * testsuite/binutils-all/ar.exp: Add a test of the new feature. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2019-10-26sort_gnu_build_notes fixAlan Modra2-1/+6
* objcopy.c (sort_gnu_build_notes): Correct sort of deleted note2.
2019-10-25elfedit: Report unknown x86 featureH.J. Lu2-1/+8
Report unknown x86 feature: $ ./elfedit --disable-x86-feature foo a.out elfedit: Error: Unknown x86 feature: foo $ * elfedit.c (elf_x86_feature): Report unknown x86 feature.
2019-10-25elfedit.c: Replace BYTE_PUT with byte_putH.J. Lu2-1/+5
Since BYTE_PUT is defined as #define BYTE_PUT(field, val) byte_put (field, val, sizeof (field)) use byte_put, instead of BYTE_PUT, to put 4-byte bitmask at ptr with "byte_put (ptr, bitmask, 4)", instead of "BYTE_PUT (ptr, bitmask)", to work with "unsigned char *ptr". * elfedit.c (update_gnu_property): Replace BYTE_PUT with byte_put.
2019-10-25Improve objcopy's note mergeing capabilities.Nick Clifton19-425/+985
* objcopy.c (struct merged_note_section): New structure. Used to chain together details of mergeable note sections. (is_merged_note_section): Rename to is_megreable_note_section and return true for note sections that use GNU_BUILD_ATTRS_SECTION_NAME as a prefix. (num_bytes): Delete (objcoopy_internal_note): Add padded_namesz field. (DEBUG_MERGE): New macro. Set to non-zero to enable debugging of the note merging code. (gap_exists): Rename to overlaps_or_adjoins and return TRUE for overlapping notes or adjoining notes. (contained_by, is_deleted_note, is_version_note) (compare_gnu_build_notes, sort_gnu_build_notes): New functions. (merge_gnu_build_notes): Rework. Sort notes into a mergeable order first. Merge them. Then sort them into an ascending address order before writing them out. (copy_object): Handle more than one mergeable note section. * testsuite/binutils-all/note-2-32.d: Update for new merging behaviour. * testsuite/binutils-all/note-2-32.s: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/note-2-64.s: Likewise. * testsuite/binutils-all/note-3-32.d: Likewise. * testsuite/binutils-all/note-3-32.s: Likewise. * testsuite/binutils-all/note-3-64.d: Likewise. * testsuite/binutils-all/note-3-64.s: Likewise. * testsuite/binutils-all/note-4-32.d: Likewise. * testsuite/binutils-all/note-4-32.s: Likewise. * testsuite/binutils-all/note-4-64.d: Likewise. * testsuite/binutils-all/note-4-64.s: Likewise. * testsuite/binutils-all/note-6-32.s: New test source file. * testsuite/binutils-all/note-6-64.s: New test source file. * testsuite/binutils-all/note-6-32.d: New test driver file. * testsuite/binutils-all/note-6-64.d: New test driver file. * testsuite/binutils-all/objcopy.exp: Run the new test.
2019-10-25readelf PT_PHDR checkAlan Modra2-5/+16
When PT_PHDR isn't covered by a PT_LOAD header, p_vaddr in PT_PHDR isn't valid but the value might just pass a vaddr test. So test p_offset as well. * readelf.c (process_program_headers): Check PT_PHDR p_offset as well as p_vaddr. Use p_filesz, not p_memsz, in vaddr test.
2019-10-21ar P supportAlan Modra3-8/+32
This patch extends "ar P" to allow creation of normal (as distinct from thin) archives with full path names. PR 452 PR 25104 bfd/ * archive.c (normalize): Return file unchanged when BFD_ARCHIVE_FULL_PATH. (_bfd_construct_extended_name_table): Pass abfd, the output bfd, to normalize. (_bfd_archive_bsd44_construct_extended_name_table): Likewise. * bfd.c (struct bfd): Make flags a full flagword. (BFD_ARCHIVE_FULL_PATH): Define. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH. * doc/binutils.texi (extract from archive): Mention restrictions when extracting from archives with full paths. (ar P): Update to current P support. (ar -X32_64): Fix spelling.
2019-10-14qsort: objcopy.c section sortAlan Modra2-9/+19
* objcopy.c (compare_section_lma): Correct comment. Dereference section pointer earlier and lose unnecessary const. Style fixes. Add final sort by id.
2019-10-13Update the README-how-to-make-a-release file with a note to reset the ↵Nick Clifton2-0/+8
development flag back to true after making a point release. Aldo fix a typo in the ld/NEWS file. binutils* README-how-to-make-a-release: Add a note to reset the development flag back to true after making a point release. ld * NEWS: Delete superflous "Changes in 2.33" comment.
2019-10-12Tweak the 'how to make a release' documentNick Clifton2-6/+16
2019-10-11Updated traditional Chinese translation for the binutils/ subdirectoryNick Clifton2-2371/+6407
2019-10-09PR25079, "ar s" stopped workingAlan Modra2-1/+8
's' is both a command and a modifier. If given as a command then we aren't lacking an operation. I think the same goes when mri mode is selected: any following command line used to be ignored. PR 25079 * ar.c (decode_options): Don't try for command options if write_armap or mri_mode is selected.
2019-10-07Add support for new functionality in the msp430 backend of GCC.Jozef Lawrynowicz2-1/+37
This functionality will generate a new GNU object attribute for the "data region" has been added. This object attribute is used mark whether the compiler has generated code assuming that data could be in the upper or lower memory regions. Code which assumes data is always in the lower memory region is incompatible with code which uses the full memory range for data. The patch also adds a new assembler directive ".mspabi_attribute" to handle the existing MSPABI object attributes. GCC will now emit both .gnu_attribute and .mspabi_attribute directives to indicate what options the source file was compiled with. The assembler will now check the values set in these directives against the options that the it has been invoked with. If there is a discrepancy, the assembler will exit with an error. bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to.. (elf32_msp430_merge_msp430_attributes): Add support for merging the GNU object attribute for data region. binutils* readelf.c (display_msp430_gnu_attribute): New. (process_arch_specific): Use msp430 specific handler for GNU attributes. gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to FALSE if the data region is set to "upper", "either" or "none". (msp430_object_attribute): New. (md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute. (msp430_md_end): Replace hard-coded attribute values with enums. Handle data region object attribute. * doc/as.texi: Document MSP430 Data Region object attribute. * doc/c-msp430.texi: Document the .mspabi_attribute directive. * testsuite/gas/msp430/attr-430-small-bad.d: New test. * testsuite/gas/msp430/attr-430-small-bad.l: New test. * testsuite/gas/msp430/attr-430-small-good.d: New test. * testsuite/gas/msp430/attr-430-small.s: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-any-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-any-good.d: New test. * testsuite/gas/msp430/attr-430x-large-any.s: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test. * testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test. * testsuite/gas/msp430/attr-430x-large-lower-good.d: New test. * testsuite/gas/msp430/attr-430x-large-lower.s: New test. * testsuite/gas/msp430/msp430.exp: Run new tests. include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names and values. ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test. * testsuite/ld-msp430-elf/attr-gnu-obj.s: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test. * testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test. * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
2019-10-03binutils: spaces -> tabs in CTF parts of objdump and readelfNick Alcock3-16/+23
For readelf particularly, this is more or less whistling in the dark: there are hundreds of lines where spaces are used where tabs were used on adjacent lines. New in v5. binutils/ * objdump.c (main): Fix tabdamage. * readelf.c (CTF_DUMP): Likewise. (options): Likewise. (dump_section_as_ctf): Likewise.
2019-10-03objdump: get CTF parent importing rightNick Alcock3-14/+33
The linker emits CTF into a single section named .ctf, which is a CTF archive where the default member (itself named ".ctf", or simply NULL) is the parent of all other members. Teach objdump to look for this by default, rather than only trying to do it if a specific CTF parent section was specified. (If no parent name is specified, we get the .ctf member from the same section as everything else, which matches what the linker generates.) binutils/ * objdump.c (dump_ctf): Use the default CTF archive member as the parent even when no parent section is specified. (dump_ctf_archive_member): Only import from the parent if this is not the default ".ctf" member.
generated by cgit v1.1 at 2024-11-21 20:32:59 +0000