aboutsummaryrefslogtreecommitdiff
path: root/binutils/testsuite
AgeCommit message (Collapse)AuthorFilesLines
2019-01-01Update year range in copyright notice of binutils filesAlan Modra41-41/+41
2018-12-14elf: Add PT_GNU_PROPERTY segment typeH.J. Lu5-5/+5
Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.
2018-12-08Fix strings.c endian issue and strings testAlan Modra1-13/+5
git commit 71f5e3f7b624 obviously wasn't tested on a big-endian host, and the test fail message resulted in tcl errors. * strings.c (unget_part_char): New function. (print_strings): Use unget_part_char. Formatting. * testsuite/binutils-all/strings.exp (test_multibyte): Don't use square brackets in fail message. Expect "String1\nString2".
2018-12-07Synchronize libiberty with gcc and add --no-recruse-limit option to tools ↵Nick Clifton2-0/+50
that support name demangling. This patch addresses the multitude of bug reports about resource exhaustion in libiberty's name demangling code. It adds a limit to the amount of recursion that is allowed, before an error is triggered. It also adds a new demangling option to disable this limit. (The limit is enabled by default). PR 87681 PR 87675 PR 87636 PR 87335 libiberty * cp-demangle.h (struct d_info): Add recursion_limit field. * cp-demangle.c (d_function_type): If the recursion limit is enabled and reached, return with a failure result. (d_demangle_callback): If the recursion limit is enabled, check for a mangled string that is so long that there is not enough stack space for the local arrays. * cplus-dem.c (struct work): Add recursion_level field. (demangle_nested_args): If the recursion limit is enabled and reached, return with a failure result. include * demangle.h (DMGL_RECURSE_LIMIT): Define. (DEMANGLE_RECURSION_LIMIT): Prototype. binutuils * addr2line.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (translate_address): Pass demangle_flags to bfd_demangle. (main): Handle --recurse-limit and --no-recurse-limit options. * cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags passed to cplus_demangle. * nm.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * objdump.c (demangle_flags): New static variable. (usage): Add --recurse-limit and --no-recurse-limit. (long_options): Likewise. (objdump_print_symname): Pass demangle_flags to bfd_demangle. (disassemble_section): Likewise. (dump_dymbols): Likewise. (main): Handle new options. * prdbg.c (demangle_flags): New static variable. (tg_variable): Pass demangle_flags to demangler. (tg_start_function): Likewise. * stabs.c (demangle_flags): New static variable. (stab_demangle_template): Pass demangle_flags to demangler. (stab_demangle_v3_argtypes): Likewise. (stab_demangle_v3_arg): Likewise. * doc/binutuls.texi: Document new command line options. * NEWS: Mention the new feature. * testsuite/config/default.exp (CXXFILT): Define if not already defined. (CXXFILTFLAGS): Likewise. * testsuite/binutils-all/cxxfilt.exp: New file. Runs a few simple tests of the cxxfilt program.
2018-12-03Update the assembler to use a version of 3 when generating the header of the ↵Nick Clifton2-2/+2
.debug_line section. PR 23941 gas * dwarf2dbg.c (DWARF2_LINE_VERSION): Change to 3. * testsuite/gas/elf/dwarf2-3.d: Update expected output. * testsuite/gas/elf/dwarf2-5.d: Likewise. * testsuite/gas/i386/debug1.d: Likewise. * testsuite/gas/i386/dw2-compress-1.d: Likewise. * testsuite/gas/i386/dw2-compress-3a.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-1.d: Likewise. * testsuite/gas/i386/dw2-compressed-3a.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/ia64/pr13167.d: Likewise. * testsuite/gas/mips/loc-swap-2.d: Likewise. * testsuite/gas/mips/loc-swap.d: Likewise. * testsuite/gas/mips/micromips@loc-swap-2.d: Likewise. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-2.d: Likewise. * testsuite/gas/mips/mips16@loc-swap.d: Likewise. * testsuite/gas/mips/mips16e@loc-swap.d: Likewise. binutils* testsuite/binutils-all/i386/compressed-1a.d: Update expected output. * testsuite/binutils-all/x86-64/compressed-1a.d: Likewise.
2018-11-27Handle ELF compressed header alignment correctly by setting up the section ↵Mark Wielaard2-2/+2
alignment correctly for the Elf32_Chdr or Elf64_Chdr type and respect the ch_addralign field when decompressing the section data. PR binutils/23919 binutils* readelf.c (dump_sections_as_strings): Remove bogus addralign check. (dump_sections_as_bytes): Likewise. (load_specific_debug_sections): Likewise. * testsuite/binutils-all/dw2-3.rS: Adjust alignment. * testsuite/binutils-all/dw2-3.rt: Likewise. bfd * bfd.c (bfd_update_compression_header): Explicitly set alignment. (bfd_check_compression_header): Add uncompressed_alignment_power argument. Check ch_addralign is a power of 2. * bfd-in2.h: Regenerated. * compress.c (bfd_compress_section_contents): Get and set orig_uncompressed_alignment_pow if section is decompressed. (bfd_is_section_compressed_with_header): Add and get uncompressed_align_pow_p argument. (bfd_is_section_compressed): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call. (bfd_init_section_decompress_status): Get and set uncompressed_alignment_power. * elf.c (_bfd_elf_make_section_from_shdr): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call.
2018-11-20readelf: Prune gaps warning in build notesH.J. Lu1-0/+2
Since some object files may not have build notes, it is normal to have gaps in build notes. PR binutils/23898 * testsuite/lib/binutils-common.exp (prune_warnings_extra): Prune gaps in build notes.
2018-11-13opcodes/nfp: Fix disassembly of crc[] with swapped operands.Francois H. Theron2-4/+28
The decoding of the CRC operation in alu instructions was using bits from the instruction word directly, instead of srcA which would be different if the swap bit was set. Signed-off-by: Francois H. Theron <francois.theron@netronome.com>
2018-11-09Enhance the strings program so that it can display multibyte strings.Nick Clifton3-0/+47
* strings.c (print_strings): Check for multibyte encodings. * binutils-all/strings-1.bin: New file. Test binary for string decoding. * testsuite/binutils-all/strings.exp: New file. Test the strings program. * testsuite/config/default.exp (STRINGS): Define if not provided by the environment. (STRINGSFLAGS): Likewise.
2018-11-07Enhance objdump's --disassemble switch so that it can now take an optional ↵Masatake Yamato8-12/+105
parameter, specifying the starting symbol for disassembly. Disassembly will continue from this symbol up to the next symbol. * objdump.c (long_options): Have the --disassemble option take an optional argument. (usage): Add description for the `symbol' argument to the --disassemble option. (disasm_sym): New file private variable. (struct objdump_disasm_info): New field `symbol'. (disassemble_section): Introduce `do_print' local variable to control whether objdump displays the result of disassembling for a symbol or not. (main): Set `symbol' file private variable if the option argument for the --disassemble option is given. * doc/binutils.texi (objdump): Add description for the option argument. * NEWS: Mention the new feature. * testsuite/binutils-all/objdump.exp: Add tests of the -d and --disassemble=<symbol> options. * testsuite/binutils-all/bintest.s: Add more symbols and code. * testsuite/binutils-all/readelf.s: Update expected output. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-mips: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise.
2018-11-07rx: Add target rx-*-linux.Yoshinori Sato1-1/+1
2018-11-01Fix ld action in run_dump_testThomas Preud'homme2-0/+27
run_dump_test proposes an ld action but when trying to make use of it in a gas test it gave me some Tcl error. It turns out that it references the check_shared_lib_support procedure and ld_elf_shared_opt variable both only available in ld-lib.exp. I've thus moved the procedure in binutils-common.exp and defined the variable needed in the various default.exp of testsuite that seem to be using run_dump_test. Since check_shared_lib_support itself references the ld variable not defined in binutils-common I've defined it from LD in run_dump_test and fixed LD and LDFLAGS to be defined as expected by run_dump_test in the various default.exp of testsuite using run_dump_test. 2018-11-01 Thomas Preud'homme <thomas.preudhomme@linaro.org> binutils/ * testsuite/config/default.exp: Define LD, LDFLAGS and ld_elf_shared_opt. * testsuite/lib/binutils-common.exp (check_shared_lib_support): Moved from ld-lib.exp. (run_dump_test): Set ld to $LD. gas/ * testsuite/config/default.exp: Define LD, LDFLAGS and ld_elf_shared_opt. ld/ * testsuite/lib/ld-lib.exp (check_shared_lib_support): Moved to binutils-common.exp.
2018-10-11Prevent the --keep-global-symbol and --globalize-symbol options from being ↵Nick Clifton2-0/+9
used together. This is the result of an email thread starting here: https://sourceware.org/ml/binutils/2018-09/msg00031.html The main point of the thread is this observation: * Supposing we had an object file with two globals, SomeGlobal and SomeOtherGlobal, if one were to do "--globalize-symbol SomeGlobal --keep-global-symbol SomeOtherGlobal", you might expect that both SomeGlobal and SomeOtherGlobal are global in the output file... but it isn't. Because --keep-global-symbol is set and doesn't include SomeGlobal, SomeGlobal will be demoted to a local symbol. And because the check to see if we should apply the --globalize-symbol flag checks "flags" (the original flag set), and not "sym->flags", it decides not to do anything, so SomeGlobal remains a local symbol. Although this is a weird edge case, should this be changed so that --keep-global-symbol implicitly keeps anything also specified via --globalize-symbol? (The code seems technically correct with respect to the documentation, but IMO the behavior is counter-intuitive). binutils* objcopy.c (copy_main): Issue a fata error if the --keep-global-symbol(s) and the --globalize-symbol(s) options are used together. * doc/binutils.texi: Document that the two options are incompatible. * testsuite/binutils-all/copy-5.d: New test. * testsuite/binutils-all/objcopy.exp: Run the new test.
2018-09-20binutils --dwarf=decodedline: Add display of is_stmt flagJohn Darrington2-8/+8
binutils/ * dwarf.c (display_debug_lines_decoded): Add display of is_stmt. * testsuite/binutils-all/dw5.W: Deal with the consequences. * testsuite/binutils-all/objdump.WL: Deal with the consequences.
2018-09-20Andes Technology has good news for you, we plan to update the nds32 port of ↵Nick Clifton6-6/+15
binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-09-17Support objcopy --remove-section=.relaFOOAlan Modra7-0/+18
* objcopy.c (handle_remove_section_option): Don't require a dot after .rela and .rel to handle a possible relocation section. * testsuite/binutils-all/remove-relocs-07.s, * testsuite/binutils-all/remove-relocs-07.d, * testsuite/binutils-all/remove-relocs-08.d: New tests. * testsuite/binutils-all/remove-relocs-01.d, * testsuite/binutils-all/remove-relocs-04.d, * testsuite/binutils-all/remove-relocs-05.d, * testsuite/binutils-all/remove-relocs-06.d: Exclude mips64-openbsd.
2018-09-17A few hppa testcase tidiesAlan Modra2-5/+21
binutils/ * testsuite/lib/binutils-common.exp (is_som_format): New proc. (run_dump_test): Correct target test for alternate .comm syntax. (get_standard_section_names): Handle som format. * testsuite/lib/utils-lib.exp (default_binutils_assemble_flags): Correct target test for alternate .comm syntax. gas/ * testsuite/gas/all/gas.exp (redef3): Don't xfail for hppa. (octa): Run for hppa. * testsuite/gas/elf/elf.exp (common1, common2): Likewise. * testsuite/gas/elf/symver.d: Delete notarget. ld/ * testsuite/ld-elf/comm-data5.d: Remove notarget for hppa. * testsuite/ld-scripts/defined6.d: Likewise.
2018-09-17Adjust some strip testcases to silence h8300 warningsAlan Modra9-9/+9
* testsuite/binutils-all/strip-13mips64.s: Add section flags for reloc section. * testsuite/binutils-all/strip-13rel.s: Likewise. * testsuite/binutils-all/strip-13rela.s: Likewise. * testsuite/binutils-all/strip-14mips64.s: Likewise. * testsuite/binutils-all/strip-14rel.s: Likewise. * testsuite/binutils-all/strip-14rela.s: Likewise. * testsuite/binutils-all/strip-15mips64.s: Likewise. * testsuite/binutils-all/strip-15rel.s: Likewise. * testsuite/binutils-all/strip-15rela.s: Likewise.
2018-09-17Ensure that binutils test names are unique.Nick Clifton3-15/+15
binutils* testsuite/binutils-all/compress.exp: Rename second "objcopy zlib-gnu compress debug sections 3" test to "objcopy zlib-gabi compress debug sections 3" and use gabi object files instead of gnu object files. * testsuite/binutils-all/objcopy.exp: Add suffix to the names of the "ELF group" tests. * testsuite/binutils-all/readelf.exp (proc readelf_find_size): Add an iteration parameter and include it in the name of the test. Update callers to include an iteration count. gas * testuite/gas/elf/group0a.d: Add extra details to the test name. * testuite/gas/elf/group0b.d: Likewise. * testuite/gas/elf/group1a.d: Likewise. * testuite/gas/elf/group1b.d: Likewise. * testuite/gas/elf/group0b.d: Likewise. * testuite/gas/elf/section9.d: Likewise. * testuite/gas/i386/ilp32/lns/lns-common-1.d: Likewise. * testuite/gas/i386/ilp32/lns/lns-duplicate-1.d: Likewise. ld * testuite/ld/ld-elf/audit.exp: Differentiate the names of the two "Run with shared with --audit" tests. * testuite/ld/ld-elf/compress.exp: Differentiate the zlib compressed debug output test names. * testuite/ld/ld-i386/tlspie1.d: Add extra details to the test name. * testuite/ld/ld-i386/tlspie2.d: Likewise. * testuite/ld/ld-size/size.exp: Add missing escapes to the end of lines in the size-3e test. * testuite/ld/ld-unique/unique.exp: Differentiate the names of the two "Checking unique PIC object" tests. * testuite/ld/ld-x86-64/tlspie1.d: Add extra details to the test name.
2018-09-15Consolidate run_dump_testAlan Modra14-579/+908
This merges the three versions of run_dump_test. Improved warning handling versus the old gas version shows up a number of tests that need their disassembly updating: arm-linuxeabi +FAIL: ARM v1 instructions arm-linuxeabi +FAIL: Accepted v8-a with ARMv8.1 AdvSIMD. arm-linuxeabi +FAIL: bl local instructions for v4t. arm-linuxeabi +FAIL: UDF and some that now fail due to detecting assembly warnings: h8300-elf +FAIL: binutils-all/strip-13 h8300-elf +FAIL: binutils-all/strip-14 h8300-elf +FAIL: binutils-all/strip-15 I've generally kept the union of all run_dump_test features, except that the ld target aliases "cfi" and "shared" have disappeared, as has the binutils substitution of $srcdir as $scrdir/$subdir. binutils/ * testsuite/binutils-all/add-symbol.d: Add "section_subst: no". * testsuite/binutils-all/elfedit.exp: Don't set tempfile or copyfile. * testsuite/binutils-all/symbols-1.d, * testsuite/binutils-all/symbols-2.d, * testsuite/binutils-all/symbols-3.d, * testsuite/binutils-all/symbols-4.d: Quote '*' and '!'. * testsuite/binutils-all/add-empty-section.d, * testsuite/binutils-all/add-section.d, * testsuite/binutils-all/elfedit.exp, * testsuite/binutils-all/note-1.d, * testsuite/binutils-all/pr23633.d: Add $subdir after $srcdir. * testsuite/config/default.exp (AS, ASFLAGS): Define. * testsuite/config/hppa.sed: Handle all common symbols. * testsuite/lib/binutils-common.exp (run_dump_test): New proc, merged from three other versions. (slurp_options, file_contents, set_file_contents): Likewise. (big_or_little_endian, get_standard_section_names): Likewise. * testsuite/lib/utils-lib.exp (run_dump_test): Delete. (slurp_options, proc file_contents): Delete. (get_standard_section_names): Delete. gas/ * testsuite/config/default.exp: Make tmpdir. * testsuite/lib/gas-defs.exp (run_dump_test): Delete. (get_standard_section_names, slurp_options): Delete. ld/ * testsuite/ld-d10v/reloc-007.d, * testsuite/ld-d10v/reloc-008.d, * testsuite/ld-d10v/reloc-015.d, * testsuite/ld-d10v/reloc-016.d: Remove "error:". * testsuite/ld-elf/eh-frame-hdr.d, * testsuite/ld-elf/eh5.d, * testsuite/ld-gc/personality.d: Replace "cfi" and "shared" in target list with appropriate proc. * testsuite/ld-elf/frame.exp: Use check_shared_lib_support rather than "istarget shared". * testsuite/lib/ld-lib.exp (proc big_or_little_endian): Delete. (run_dump_test, slurp_options, file_contents): Delete. (set_file_contents, istarget): Delete.
2018-09-15binutils run_dump_test rename not-target and not-skipAlan Modra21-35/+35
Use notarget and noskip, like the ld testsuite. * testsuite/binutils-all/copy-2.d, * testsuite/binutils-all/copy-3.d, * testsuite/binutils-all/copy-4.d, * testsuite/binutils-all/elfedit-1.d, * testsuite/binutils-all/note-1.d, * testsuite/binutils-all/note-2-64.d, * testsuite/binutils-all/strip-11.d, * testsuite/binutils-all/strip-13.d, * testsuite/binutils-all/strip-14.d, * testsuite/binutils-all/testranges.d, * testsuite/binutils-all/x86-64/pr23494a-x32.d, * testsuite/binutils-all/x86-64/pr23494a.d, * testsuite/binutils-all/x86-64/pr23494b-x32.d, * testsuite/binutils-all/x86-64/pr23494b.d, * testsuite/binutils-all/x86-64/pr23494c-x32.d, * testsuite/binutils-all/x86-64/pr23494c.d, * testsuite/binutils-all/x86-64/pr23494d-x32.d, * testsuite/binutils-all/x86-64/pr23494d.d, * testsuite/binutils-all/x86-64/pr23494e-x32.d, * testsuite/binutils-all/x86-64/pr23494e.d, * testsuite/lib/utils-lib.exp (run_dump_test): Replace not-target and not-skip with notarget and noskip.
2018-09-15Remove run_dump_test support for objcopy as a dump programAlan Modra7-7/+0
We have three copies of run_dump_test in the testsuite. This is a first step towards consolidating them. A few tests use objcopy to convert to verilog or srec output, then check that output is as expected. Those tests can just as easily use objdump, keeping the set of dump programs (addr2line, nm, objdump, readelf, size) separate from utilities under test. That in turn makes auto-detecting the dump program possible in more places. binutils/ * testsuite/binutils-all/group-7a.d, * testsuite/binutils-all/group-7b.d, * testsuite/binutils-all/group-7c.d, * testsuite/binutils-all/symbols-1.d, * testsuite/binutils-all/symbols-2.d, * testsuite/binutils-all/symbols-3.d, * testsuite/binutils-all/symbols-4.d: Remove DUMPPROG. gas/ * testsuite/gas/mri/char.d: Don't objcopy to srec, objdump instead. * testsuite/gas/mri/float.d: Likewise. * testsuite/lib/gas-defs.exp (run_dump_test): Remove support for objcopy as a dump tool. ld/ * testsuite/ld-elf/interleave-0.d, * testsuite/ld-elf/interleave-4.d: Don't objcopy to srec, objdump instead. * testsuite/ld-gc/all-debug-sections.d, * testsuite/ld-scripts/provide-4.d, * testsuite/ld-scripts/provide-5.d, * testsuite/ld-scripts/provide-6.d, * testsuite/ld-scripts/provide-7.d, * testsuite/ld-scripts/provide-8.d, * testsuite/ld-scripts/segment-start.d: Remove PROG, specify nm instead. * testsuite/lib/ld-lib.exp (run_dump_test): Remove support for objcopy as a dump tool.
2018-09-14PR23633 testcase fixAlan Modra1-0/+1
PR binutils/23633 * testsuite/binutils-all/pr23633.d: Don't fail when assembler generates sections other than .text.
2018-09-13Add a testcase for PR binutils/23633H.J. Lu4-0/+2431
PR binutils/23633 * testsuite/binutils-all/objcopy.exp: Run pr23633. * testsuite/binutils-all/pr23633.d: New file. * testsuite/binutils-all/pr23633.list: Likewise. * testsuite/binutils-all/pr23633.s: Likewise.
2018-09-10PR23611, objcopy is not removing executable relocatable sectionsAlan Modra1-0/+33
BFD handles ELF relocation sections in an executable differently to relocation sections in a relocatable object. For a relocatable object, BFD carries the relocations as data associated with the section to which they apply; The relocation section doesn't appear as a separate section. For an executable, dynamic relocation sections do appear as separate sections. This means that objcopy needs to use different strategies when dealing with relocations. When --remove-relocations was added to objcopy with commit d3e5f6c8f1e, objcopy lost the ability to remove dynamic relocation sections such as .rela.plt from executables using the option "--remove-section=.rela.plt". This patch reinstates that functionality. I thought it best to keep --remove-relocations as is, rather than extending to handle dynamic relocations as per the patch in the PR, because executables linked with --emit-relocs may have both dynamic and non-dynamic relocations. In that case --remove-relocataions=* is useful to remove all the non-dynamic relocations. PR binutils/23611 * objcopy.c (handle_remove_section_option): Consider .rela and .rel sections for stripping directly as well as attached to the associated section they relocate. * doc/binutils.texi (remove-relocations): Specify that this option removes non-dynamic relocation sections. * testsuite/binutils-all/objcopy.exp (objcopy_remove_relocations_from_executable): New test.
2018-08-31binutils: Adjusted tests for .note.gnu.property sectionH.J. Lu2-5/+8
Since x86 assembler may generate .note.gnu.property section, adjust binutils tests to handle it. * testsuite/binutils-all/readelf.s-64: Adjusted for .note.gnu.property section. * testsuite/binutils-all/strip-3.d: Also strip .note.gnu.property section.
2018-08-31x86: Add explicit -mx86-used-note=[yes|no] to testsH.J. Lu27-33/+78
Pass explicit -mx86-used-note=[yes|no] to x86 assembler and update expected outputs from "readelf -n" if needed. binutils/ * testsuite/binutils-all/i386/compressed-1b.d: Pass -mx86-used-note=no to assembler. * testsuite/binutils-all/i386/compressed-1c.d: Likewise. * testsuite/binutils-all/x86-64/compressed-1b.d: Likewise. * testsuite/binutils-all/x86-64/compressed-1c.d: Likewise. * testsuite/binutils-all/i386/empty.d: Pass -mx86-used-note=yes to assembler and update expected output from "readelf -n". * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ * testsuite/gas/i386/bss.d: Pass -mx86-used-note=no to assembler. * testsuite/gas/i386/ilp32/quad.d: Likewise. * testsuite/gas/i386/ilp32/reloc64.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. * testsuite/gas/i386/property-1.d: Likewise. * testsuite/gas/i386/relax.d: Likewise. * testsuite/gas/i386/reloc64.d: Likewise. * testsuite/gas/i386/size-1.d: Likewise. * testsuite/gas/i386/size-3.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-size-1.d: Likewise. * testsuite/gas/i386/x86-64-size-3.d: Likewise. * testsuite/gas/i386/x86-64-size-5.d: Likewise. * testsuite/gas/i386/x86-64-unwind.d: Likewise. * testsuite/gas/i386/divide.d: Append "#pass". ld/ * testsuite/ld-i386/i386.exp: (ASFLAGS): Save, append -mx86-used-note=no and restore. Pass -mx86-used-note=yes and -mx86-used-note=no to assembler. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/no-plt.exp: Pass -mx86-used-note=yes to assembler. * testsuite/ld-i386/tls.exp: Likewise. * testsuite/ld-x86-64/no-plt.exp: Likewise. * testsuite/ld-x86-64/tls.exp: Likewise. * testsuite/ld-i386/pr23486a.d: Pass -mx86-used-note=no to assembler. * testsuite/ld-i386/pr23486b.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/pr23486a-x32.d: Likewise. * testsuite/ld-x86-64/pr23486a.d: Likewise. * testsuite/ld-x86-64/pr23486b-x32.d: Likewise. * testsuite/ld-x86-64/pr23486b.d: Likewise. * testsuite/ld-i386/property-x86-3.d: Pass -mx86-used-note=yes to assembler and update expected output from "readelf -n". * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/property-1a.r: New file. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/mpx.exp: Pass -mx86-used-note=no to assembler.
2018-08-27x86: Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bitH.J. Lu2-2/+2
Since only the GNU_PROPERTY_X86_UINT32_VALID bit may be set in data-only relocatable objects which don't contain any instructions, linker shouldn't mask out the GNU_PROPERTY_X86_UINT32_VALID bit when merging GNU_PROPERTY_X86_XXX bits. Otherwise, linker output doesn't contain GNU_PROPERTY_X86_XXX property with any data-only relocatable inputs. This patch keeps the GNU_PROPERTY_X86_UINT32_VALID bit and updates readelf to print "<None>" if GNU_PROPERTY_X86_XXX property only has the GNU_PROPERTY_X86_UINT32_VALID bit. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bit. binutils/ * readelf.c (decode_x86_isa): Print <None> if bitmask only contains the GNU_PROPERTY_X86_UINT32_VALID bit. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Don't mask out the GNU_PROPERTY_X86_UINT32_VALID bit. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. gas/ * testsuite/gas/i386/i386.exp: Run property-1 and x86-64-property-1. * testsuite/gas/i386/property-1.d: New file. * testsuite/gas/i386/property-1.s: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. ld/ * testsuite/ld-i386/i386.exp: Run property-x86-5. * testsuite/ld-i386/property-x86-5.d: New file. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Likewise. * testsuite/ld-x86-64/property-x86-5b.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run property-x86-5 and property-x86-5-x32.
2018-08-24x86: Update GNU_PROPERTY_X86_XXX macrosH.J. Lu15-29/+29
This patch updates GNU_PROPERTY_X86_XXX macros: 1. GNU_PROPERTY_X86_UINT32_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_AND_LO 0xc0000002 #define GNU_PROPERTY_X86_UINT32_AND_HI 0xc0007fff 2. GNU_PROPERTY_X86_UINT32_OR_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_LO 0xc0008000 #define GNU_PROPERTY_X86_UINT32_OR_HI 0xc000ffff 3. GNU_PROPERTY_X86_UINT32_OR_AND_XXX: A 4-byte unsigned integer property. A bit is set if it is set in any relocatable inputs and the property is present in all relocatable inputs: #define GNU_PROPERTY_X86_UINT32_OR_AND_LO 0xc0010000 #define GNU_PROPERTY_X86_UINT32_OR_AND_HI 0xc0017fff 4. GNU_PROPERTY_X86_FEATURE_2_NEEDED, GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_FEATURE_2_XXX bits. GNU_PROPERTY_X86_FEATURE_1_AND is unchanged. GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED are updated to better support targeted processors since GNU_PROPERTY_X86_ISA_1_?86 aren't isn't very useful. A new set of GNU_PROPERTY_X86_ISA_1_XXX bits are defined. The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_ISA_1_XXX. bfd/ * elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. (_bfd_x86_elf_merge_gnu_properties): Likewise. (_bfd_x86_elf_link_setup_gnu_properties): Add X86_FEATURE_2_NEEDED instead of X86_ISA_1_NEEDED. (_bfd_x86_elf_link_fixup_gnu_properties): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. binutils/ * readelf.c (decode_x86_compat_isa): New function. (decode_x86_feature_2): Likewise. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature): Renamed to ... (decode_x86_feature_1): This. Remove the type argument. (print_gnu_property_note): Handle X86_COMPAT_ISA_1_USED, X86_COMPAT_ISA_1_NEEDED, X86_UINT32_AND_LO, X86_UINT32_AND_HI, X86_UINT32_OR_LO, X86_UINT32_OR_HI, X86_UINT32_OR_AND_LO and X86_UINT32_OR_AND_HI instead of X86_ISA_1_USED, X86_ISA_1_NEEDED and X86_FEATURE_1_AND. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Updated. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_ISA_1_XXX): This. (GNU_PROPERTY_X86_UINT32_AND_LO): New. (GNU_PROPERTY_X86_UINT32_AND_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_HI): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_LO): Likewise. (GNU_PROPERTY_X86_UINT32_OR_AND_HI): Likewise. (GNU_PROPERTY_X86_ISA_1_CMOV): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE2): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSSE3): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Likewise. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX2): Likewise. (GNU_PROPERTY_X86_ISA_1_FMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512F): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4FMAPS): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_4VNNIW): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_BITALG): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_IFMA): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VBMI2): Likewise. (GNU_PROPERTY_X86_ISA_1_AVX512_VNNI): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X86): Likewise. (GNU_PROPERTY_X86_FEATURE_2_X87): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MMX): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_YMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_ZMM): Likewise. (GNU_PROPERTY_X86_FEATURE_2_FXSR): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVE): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEOPT): Likewise. (GNU_PROPERTY_X86_FEATURE_2_XSAVEC): Likewise. (GNU_PROPERTY_X86_FEATURE_1_AND): Updated to (GNU_PROPERTY_X86_UINT32_AND_LO + 0). (GNU_PROPERTY_X86_ISA_1_NEEDED): Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_NEEDED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_LO + 1). (GNU_PROPERTY_X86_ISA_1_USED): Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 0). (GNU_PROPERTY_X86_FEATURE_2_USED): New. Defined to (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 1). ld/ * testsuite/ld-i386/i386.exp: Run pr23372c, pr23372d, pr23486c and pr23486d. * testsuite/ld-i386/pr23372a.s: Update comments. * testsuite/ld-i386/pr23372b.s: Likewise. * testsuite/ld-i386/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23372a.s: Likewise. * testsuite/ld-x86-64/pr23372b.s: Likewise. * testsuite/ld-x86-64/pr23372c.s: Likewise. * testsuite/ld-x86-64/pr23486a.s: Likewise. * testsuite/ld-x86-64/pr23486b.s: Likewise. * testsuite/ld-i386/pr23372c.d: New file. * testsuite/ld-i386/pr23372d.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-i386/property-3.r: Updated. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run pr23372c, pr23372c-x32, pr23372d, pr23372d-x32, pr23486c, pr23486c-x32, pr23486d and pr23486d-x32.
2018-08-23Prune BFD warnings for unknown GNU propertiesH.J. Lu2-0/+56
When glibc is enabled with the new GNU_PROPERTY_X86_XXX bits: https://groups.google.com/forum/#!topic/x86-64-abi/-D05GQ3kWrA BFD will issue an unknown GNU property warning like warning: tmpdir/ld1: unsupported GNU_PROPERTY_TYPE (5) type: 0xc0010001 and ignore such GNU properties. This patch adds prune_warnings_extra to prune such warnings on release branches and updates prune_warnings to call prune_warnings_extra. binutils/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/binutils-all/objcopy.exp (strip_test): Call prune_warnings to prune BFD output. (strip_test_with_saving_a_symbol): Likewise. (objcopy_test_without_global_symbol): Likewise. * testsuite/lib/binutils-common.exp (prune_warnings_extra): New proc. (prune_warnings): Likewise. gas/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. ld/ PR ld/23536 * Makefile.am (development.exp): New target. (EXTRA_DEJAGNU_SITE_CONFIG): New. (DISTCLEANFILES): Add development.exp. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Call prune_warnings to prune BFD output. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/lib/ld-lib.exp (prune_warnings): Removed. * testsuite/ld-elf/shared.exp: Allow "\n" in linker warnings.
2018-08-18binutils testsuite strip-13 testAlan Modra6-48/+60
The strip-13 test runs into difficulty using dc.a on some targets. dc.a writes a power of 2 number of bytes large enough to contain a target address. On some targets, eg. avr-elf, this can be 2 bytes but the ELF format used require words of 4 bytes to make up a relocation entry. There was a hack in the test, duplicating the reloc type into what is normally the addend to make the test work when little-endian, but that hack fails for similar big-endian targets. This patch fixes that problem by arranging to emit 32-bit and 64-bit ELF relocs using .4byte and .8byte directives, chosen as appropriate for the ELF size. I've also bumped the reloc number tested to a higher unused value, and made the number more easily parameterised by target should that be necessary in the future. Whether REL or RELA relocs are used is now chosen by a new is_rela readelf test of an object file, rather than by lists of targets. * testsuite/lib/binutils-common.exp (is_elf64): Use directory of input file for readelf.out. (is_rela): New proc. * testsuite/binutils-all/objcopy.exp (elf64): Set new variable from first result of is_elf64 test. (reloc_format): Set using is_rela. (strip-13): Pass RELOC and ELF64 to assembler. (strip-14, strip-15): Use elf64 rather than calling is_elf64 again. * testsuite/binutils-all/strip-13.d: Run for more targets. * testsuite/binutils-all/strip-13mips64.s: Use RELOC and set addend to zero. * testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64. Don't add _NONE reloc. * testsuite/binutils-all/strip-13rela.s: Likewise.
2018-08-10Always use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZEH.J. Lu3-0/+149
For GNU_PROPERTY_STACK_SIZE, pr_datasz is the same as align_size, which is 8 bytes for 64-bit ELF binaries and 4 bytes for 32-bit ELF binaries, Use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE to convert .note.gnu.property section. bfd/ PR binutils/23494 * elf-properties.c (elf_get_gnu_property_section_size): Always use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE. (elf_write_gnu_properties): Likewise. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494c.s: New file. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
2018-08-10Skip PR binutils/23494 tests for nacl targetsH.J. Lu8-0/+8
PR binutils/23494 tests pass "-O elf64-x86-64" and "-O elf32-x86-64" to objcopy which may not supported for nacl targets. This patch skips these tests for nacl targets. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Skip nacl targets. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-08-08Convert .note.gnu.property section between ELF32 and ELF64H.J. Lu10-0/+196
.note.gnu.property section has different alignments and section sizes for 32-bit and 64-bit ELF binaries. This patch updated bfd_convert_section_size and bfd_convert_section_contents to properly convert .note.gnu.property section between 32-bit and 64-bit ELF binaries. bfd/ PR binutils/23494 * bfd.c (bfd_convert_section_size): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_property_size to convert .note.gnu.property section size. (bfd_convert_section_contents): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_properties to convert .note.gnu.property section. * elf-bfd.h (_bfd_elf_convert_gnu_property_size): New prototype. (_bfd_elf_convert_gnu_properties): Likewise. * elf-properties.c (elf_get_gnu_property_section_size): New function. (elf_write_gnu_properties): Likewise. (_bfd_elf_convert_gnu_property_size): Likewise. (_bfd_elf_convert_gnu_properties): Likewise. (_bfd_elf_link_setup_gnu_properties): Use elf_get_gnu_property_section_size and elf_write_gnu_properties. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494a-x32.d: New file. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-07-24PR23431, Messages composed from pieces can't be properly translatedAlan Modra1-1/+1
PR 23431 * dwarf.c (display_formatted_table): Replace "what" parameter with "is_dir". Expand messages. Fix capitalisation. * testsuite/binutils-all/dw5.W: Update expected output.
2018-07-10xgate testsuite fixesAlan Modra1-1/+2
binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_unique): Return zero for xgate. ld/ * testsuite/lib/ld-lib.exp (check_gc_sections_available): Return 0 for xgate. * testsuite/ld-elf/elf.exp: Add xgate to pr21703 xfails. * testsuite/ld-elf/shared.exp: Add xgate to pr21703 xfails. * testsuite/ld-discard/extern.d: xfail xgate. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/attributes.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr14156b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise.
2018-05-31Run a few more binutils tests non-nativeAlan Modra2-19/+3
Setting CC_FOR_TARGET from the environment CC was just plain wrong, and no doubt the reason these tests were only run natively. * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Don't set CC_FOR_TARGET. Run test non-native. * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): Likewise. (test_follow_debuglink): Run test non-native.
2018-05-30Add option to ar's 't' command to display the offset of elements within the ↵Ant Bikeneev1-4/+10
archive. PR 23107 * ar.c (display_offsets): New variable. (usage): Add description of 'O' operator. (decode_option): Handle 'O' operator. (print_descr): Pass display_offsets to print_arelt_descr. * arsup.c: Update call to printy_arelt_descr. * objdump.c: Likewise. * bucomm.c (print_arelt_descr): If offsets parameter is true then display offset of archive element within the archive. * bucomm.h: Update prototype for print_arelt_descr. * doc/binutils.texi: Update description of ar command. * NEWS: Mention the new feature. * testsuite/binutils-all/ar.exp: Add text of new feature.
2018-05-28PR23235, make check uses system installed ldAlan Modra2-3/+10
This patch doesn't stop the build-id and debuglink tests using the installed ld, it just prevents a compiler failure from resulting in a test fail. We could move the tests to the ld testsuite but it doesn't seem all that important. PR 23235 * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Return unsupported rather than fail on compile errors. * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): Likewise. Save and restore CFLAGS_FOR_TARGET.
2018-05-18Add support for the Freescale s12z processor.John Darrington2-1/+3
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-15Recognize more targets as ELF for testingAlan Modra2-12/+17
Also use the correct rel strip-13 variant for more ARM targets. * testsuite/lib/binutils-common.exp (is_elf_format): Add chorus, cloudabi, fuchsia, kaos and nto. Merge netbsdelf* into *elf*, and *uclinux* into *linux*. * testsuite/binutils-all/objcopy.exp: Accept armeb for rel strip-13 test, exclude arm-vxworks and arm-windiss.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron6-0/+1057
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-27testsuite: Support filtering targets by TCL procedure in `run_dump_test'Maciej W. Rozycki2-18/+33
Implement a more complex way of selecting targets to include or exclude with `run_dump_test' cases, by extending the syntax for the `target', `not-target', `skip' and `not-skip' options (with the binutils and GAS test suites) and the `target', `alltargets' and `notarget' options (with the LD test suite) to also accept a name of a TCL procedure instead of a target triplet glob matching expression. The result, 1 or 0, of the procedure determines whether the test is to be run or not. This mimics and expands `dg-require-effective-target' from the GCC test suite. Names of TCL procedures are supplied in square brackets `[]' as with TCL procedure calls, observing that target triplet glob matching expressions do not normally start and end with matching square brackets both at a time. Arguments for procedures are allowed if required. Having a way to specify a complex condition for a `run_dump_test' case to run has the advantage of keeping it local within the test case itself where tool options related to the check might be also present, removing the need to wrap `run_dump_test' calls into an `if' block whose only reason is to do a feature check, and ultimately lets one have the test reported as UNSUPPORTED automagically if required (not currently supported by the `run_dump_test' options used for LD). binutils/ * testsuite/lib/binutils-common.exp (match_target): New procedure. * testsuite/lib/utils-lib.exp (run_dump_test): Use it in place of `istarget' for matching with `target', `not-target', `skip' and `not-skip' options. gas/ * testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target' in place of `istarget' for matching with `target', `not-target', `skip' and `not-skip' options. ld/ * testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target' in place of `istarget' for matching with `target', `alltargets' and `notarget' options.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton3-0/+26
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-04-25[ARM] FDPIC: Update testsuite so that many tests pass with ↵Christophe Lyon5-4/+5
arm*-uclinuxfdpiceabi. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> binutils/ * testsuite/binutils-all/elfedit-2.d: Accept arm*-*-uclinuxfdpiceabi. * testsuite/binutils-all/elfedit-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/strip-3.d: Likewise. * testsuite/lib/binutils-common.exp: Likewise. ld/ * testsuite/ld-arm/export-class.exp: Accept arm*-*-uclinuxfdpiceabi. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/commonpage1.d: Likewise. * testsuite/ld-elf/compress1c.d: Likewise. * testsuite/ld-elf/compressed1b.d: Likewise. * testsuite/ld-elf/compressed1c.d: Likewise. * testsuite/ld-elf/compressed1e.d: Likewise. * testsuite/ld-elf/dynamic1.d: Likewise. * testsuite/ld-elf/dynsym1.d: Likewise. * testsuite/ld-elf/ehdr_start-missing.d: Likewise. * testsuite/ld-elf/ehdr_start-shared.d: Likewise. * testsuite/ld-elf/ehdr_start-userdef.d: Likewise. * testsuite/ld-elf/ehdr_start-weak.d: Likewise. * testsuite/ld-elf/ehdr_start.d: Likewise. * testsuite/ld-elf/exclude3b.d: Likewise. * testsuite/ld-elf/export-class.exp: Likewise. * testsuite/ld-elf/global1.d: Likewise. * testsuite/ld-elf/hash.d: Likewise. * testsuite/ld-elf/header.d: Likewise. * testsuite/ld-elf/loadaddr1.d: Likewise. * testsuite/ld-elf/loadaddr2.d: Likewise. * testsuite/ld-elf/loadaddr3a.d: Likewise. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-elf/local1.d: Likewise. * testsuite/ld-elf/maxpage1.d: Likewise. * testsuite/ld-elf/maxpage2.d: Likewise. * testsuite/ld-elf/maxpage3a.d: Likewise. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/multibss1.d: Likewise. * testsuite/ld-elf/noload-2.d: Likewise. * testsuite/ld-elf/now-1.d: Likewise. * testsuite/ld-elf/now-2.d: Likewise. * testsuite/ld-elf/now-3.d: Likewise. * testsuite/ld-elf/now-4.d: Likewise. * testsuite/ld-elf/pie.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr16322.d: Likewise. * testsuite/ld-elf/pr16498a.d: Likewise. * testsuite/ld-elf/pr16498b.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr19162.d: Likewise. * testsuite/ld-elf/pr19539.d: Likewise. * testsuite/ld-elf/pr19617a.d: Likewise. * testsuite/ld-elf/pr19617b.d: Likewise. * testsuite/ld-elf/pr19617c.d: Likewise. * testsuite/ld-elf/pr19698.d: Likewise. * testsuite/ld-elf/pr19789.d: Likewise. * testsuite/ld-elf/pr20513c.d: Likewise. * testsuite/ld-elf/pr20513d.d: Likewise. * testsuite/ld-elf/pr21384.d: Likewise. * testsuite/ld-elf/pr21389a.d: Likewise. * testsuite/ld-elf/pr21389b.d: Likewise. * testsuite/ld-elf/pr21389c.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562e.d: Likewise. * testsuite/ld-elf/pr21562f.d: Likewise. * testsuite/ld-elf/pr21562g.d: Likewise. * testsuite/ld-elf/pr21562h.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr21903a.d: Likewise. * testsuite/ld-elf/pr21903b.d: Likewise. * testsuite/ld-elf/pr21903d.d: Likewise. * testsuite/ld-elf/pr22269a.d: Likewise. * testsuite/ld-elf/pr22269b.d: Likewise. * testsuite/ld-elf/pr22393-1a.d: Likewise. * testsuite/ld-elf/pr22393-1b.d: Likewise. * testsuite/ld-elf/pr22393-1c.d: Likewise. * testsuite/ld-elf/pr22393-1d.d: Likewise. * testsuite/ld-elf/pr22393-1e.d: Likewise. * testsuite/ld-elf/pr22393-1f.d: Likewise. * testsuite/ld-elf/pr22423.d: Likewise. * testsuite/ld-elf/rpath-1.d: Likewise. * testsuite/ld-elf/rpath-2.d: Likewise. * testsuite/ld-elf/runpath-1.d: Likewise. * testsuite/ld-elf/runpath-2.d: Likewise. * testsuite/ld-elf/seg.d: Likewise. * testsuite/ld-elf/sizeofb.d: Likewise. * testsuite/ld-elf/startofb.d: Likewise. * testsuite/ld-elf/strtab.d: Likewise. * testsuite/ld-elf/textaddr1.d: Likewise. * testsuite/ld-elf/textaddr2.d: Likewise. * testsuite/ld-elf/textaddr3.d: Likewise. * testsuite/ld-elf/textaddr4.d: Likewise. * testsuite/ld-elf/textaddr5.d: Likewise. * testsuite/ld-elf/textaddr6.d: Likewise. * testsuite/ld-elf/textaddr7.d: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elf/unknown2.d: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr11218.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/rgn-at5.d: Likewise. * testsuite/ld-undefined/entry-3.d: Likewise. * testsuite/ld-undefined/entry-4.d: Likewise.
2018-04-25Remove arm-aout and arm-coff supportAlan Modra3-7/+0
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. bfd/ * Makefile.am: Remove arm-aout and arm-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-arm.c: Delete. * armnetbsd.c: Delete. * riscix.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and arm-coff support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove arm-aout and arm-coff support. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/aarch64/codealign.d: Likewise. * testsuite/gas/aarch64/mapping.d: Likewise. * testsuite/gas/aarch64/mapping2.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/addsw-bad.d: Likewise. * testsuite/gas/arm/align.d: Likewise. * testsuite/gas/arm/align64.d: Likewise. * testsuite/gas/arm/arch7.d: Likewise. * testsuite/gas/arm/arch7a-mp.d: Likewise. * testsuite/gas/arm/arch7em.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/arm-it-auto-2.d: Likewise. * testsuite/gas/arm/arm-it-auto-3.d: Likewise. * testsuite/gas/arm/arm-it-auto.d: Likewise. * testsuite/gas/arm/arm-it-bad-2.d: Likewise. * testsuite/gas/arm/arm-it.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise. * testsuite/gas/arm/armv8-a+crypto.d: Likewise. * testsuite/gas/arm/armv8-a+fp.d: Likewise. * testsuite/gas/arm/armv8-a+ras.d: Likewise. * testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise. * testsuite/gas/arm/armv8-a+rdma.d: Likewise. * testsuite/gas/arm/armv8-a+simd.d: Likewise. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r+fp.d: Likewise. * testsuite/gas/arm/armv8-r+simd.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8_1-a+simd.d: Likewise. * testsuite/gas/arm/armv8_2+rdma.d: Likewise. * testsuite/gas/arm/armv8_2-a.d: Likewise. * testsuite/gas/arm/armv8_3-a-fp.d: Likewise. * testsuite/gas/arm/armv8_3-a-simd.d: Likewise. * testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise. * testsuite/gas/arm/armv8a-automatic-lda.d: Likewise. * testsuite/gas/arm/attr-syntax.d: Likewise. * testsuite/gas/arm/automatic-bw.d: Likewise. * testsuite/gas/arm/automatic-cbz.d: Likewise. * testsuite/gas/arm/automatic-clrex.d: Likewise. * testsuite/gas/arm/automatic-lda.d: Likewise. * testsuite/gas/arm/automatic-ldaex.d: Likewise. * testsuite/gas/arm/automatic-ldaexb.d: Likewise. * testsuite/gas/arm/automatic-ldrex.d: Likewise. * testsuite/gas/arm/automatic-ldrexd.d: Likewise. * testsuite/gas/arm/automatic-movw.d: Likewise. * testsuite/gas/arm/automatic-sdiv.d: Likewise. * testsuite/gas/arm/automatic-strexb.d: Likewise. * testsuite/gas/arm/barrier-bad-thumb.d: Likewise. * testsuite/gas/arm/barrier-bad.d: Likewise. * testsuite/gas/arm/barrier-thumb.d: Likewise. * testsuite/gas/arm/barrier.d: Likewise. * testsuite/gas/arm/bignum1.d: Likewise. * testsuite/gas/arm/blx-bad.d: Likewise. * testsuite/gas/arm/blx-bl-convert.d: Likewise. * testsuite/gas/arm/blx-local.s: Likewise. * testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/dis-data.d: Likewise. * testsuite/gas/arm/dis-data2.d: Likewise. * testsuite/gas/arm/dis-data3.d: Likewise. * testsuite/gas/arm/eabi_attr_1.d: Likewise. * testsuite/gas/arm/fp-save.d: Likewise. * testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs.d: Likewise. * testsuite/gas/arm/insn-error-a.d: Likewise. * testsuite/gas/arm/insn-error-t.d: Likewise. * testsuite/gas/arm/inst-po-2.d: Likewise. * testsuite/gas/arm/inst-po-3.d: Likewise. * testsuite/gas/arm/inst-po-be.d: Likewise. * testsuite/gas/arm/inst-po.d: Likewise. * testsuite/gas/arm/ldconst.d: Likewise. * testsuite/gas/arm/ldgesb-bad.d: Likewise. * testsuite/gas/arm/ldgesh-bad.d: Likewise. * testsuite/gas/arm/ldst-offset0.d: Likewise. * testsuite/gas/arm/local_function.d: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/local_label_elf.d: Likewise. * testsuite/gas/arm/mapping.d: Likewise. * testsuite/gas/arm/mapping2.d: Likewise. * testsuite/gas/arm/mapping3.d: Likewise. * testsuite/gas/arm/mapping4.d: Likewise. * testsuite/gas/arm/mapshort-elf.d: Likewise. * testsuite/gas/arm/mask_1-armv8-a.d: Likewise. * testsuite/gas/arm/mask_1-armv8-r.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/movw-local.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise. * testsuite/gas/arm/msr-imm-bad.d: Likewise. * testsuite/gas/arm/msr-reg-bad.d: Likewise. * testsuite/gas/arm/msr-reg-thumb.d: Likewise. * testsuite/gas/arm/nomapping.d: Likewise. * testsuite/gas/arm/nops.d: Likewise. * testsuite/gas/arm/pic.d: Likewise. * testsuite/gas/arm/pinsn.d: Likewise. * testsuite/gas/arm/plt-1.d: Likewise. * testsuite/gas/arm/pr21458.d: Likewise. * testsuite/gas/arm/pr9722.d: Likewise. * testsuite/gas/arm/strex-t.d: Likewise. * testsuite/gas/arm/t2-branch-global.d: Likewise. * testsuite/gas/arm/target-reloc-1.d: Likewise. * testsuite/gas/arm/thumb-b-bad.d: Likewise. * testsuite/gas/arm/thumb-w-bad.d: Likewise. * testsuite/gas/arm/thumb-w-good.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumb2_it.d: Likewise. * testsuite/gas/arm/thumb2_it_auto.d: Likewise. * testsuite/gas/arm/thumb2_it_search.d: Likewise. * testsuite/gas/arm/thumb2_ldmstm.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_pool.d: Likewise. * testsuite/gas/arm/thumb2_vpool.d: Likewise. * testsuite/gas/arm/thumb2_vpool_be.d: Likewise. * testsuite/gas/arm/thumb32.d: Likewise. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/arm/tls.d: Likewise. * testsuite/gas/arm/tls_vxworks.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * testsuite/gas/arm/unwind.d: Likewise. * testsuite/gas/arm/v4bx.d: Likewise. * testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise. * testsuite/gas/arm/vcvt-bad.d: Likewise. * testsuite/gas/arm/vfma1.d: Likewise. * testsuite/gas/arm/vldconst.d: Likewise. * testsuite/gas/arm/vldconst_be.d: Likewise. * testsuite/gas/arm/vldm-arm.d: Likewise. * testsuite/gas/arm/vldr.d: Likewise. * testsuite/gas/arm/weakdef-1.d: Likewise. * testsuite/gas/arm/weakdef-2.d: Likewise. * config/te-riscix.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-aout and arm-coff support. * configure.tgt: Likewise. * testsuite/ld-arm/attr-merge-div-00.d: Likewise. * testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-01.d: Likewise. * testsuite/ld-arm/attr-merge-div-02.d: Likewise. * testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-10.d: Likewise. * testsuite/ld-arm/attr-merge-div-11.d: Likewise. * testsuite/ld-arm/attr-merge-div-12.d: Likewise. * testsuite/ld-arm/attr-merge-div-120.d: Likewise. * testsuite/ld-arm/attr-merge-div-20.d: Likewise. * testsuite/ld-arm/attr-merge-div-21.d: Likewise. * testsuite/ld-arm/attr-merge-div-22.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise. * testsuite/ld-arm/attr-merge-nosection-1.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44.d: Likewise. * testsuite/ld-arm/eabi-hard-float.d: Likewise. * testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise. * testsuite/ld-arm/eabi-soft-float-r.d: Likewise. * testsuite/ld-arm/eabi-soft-float.d: Likewise. * testsuite/ld-arm/gc-hidden-1.d: Likewise. * emulparams/armaoutb.sh: Delete. * emulparams/armaoutl.sh: Delete. * emulparams/armcoff.sh: Delete. * emulparams/armnbsd.sh: Delete. * emulparams/riscix.sh: Delete. * scripttempl/armaout.sc: Delete. * scripttempl/armcoff.sc: Delete. * scripttempl/riscix.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-18various i386-aout and i386-coff target removalAlan Modra1-22/+4
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sparc-aout and sparc-coff supportAlan Modra1-13/+0
bfd/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-sparcle.c: Delete. * aoutf1.h: Delete. * cf-sparclynx.c: Delete. * coff-sparc.c: Delete. * demo64.c: Delete. * sparclinux.c: Delete. * sparclynx.c: Delete. * sparcnetbsd.c: Delete. * sunos.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove sparc-aout and sparc-coff support. gas/ * Makefile.am: Remove sparc-aout and sparc-coff support. * config/obj-coff.h: Likewise. * config/tc-sparc.c: Likewise. * config/tc-sparc.h: Likewise. * configure.tgt: Likewise. * config/te-sparcaout.h: Delete. * testsuite/gas/sun4/addend.d: Delete. * testsuite/gas/sun4/addend.exp: Delete. * testsuite/gas/sun4/addend.s: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sparc-aout and sparc-coff support. * configure.tgt: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * emulparams/coff_sparc.sh: Delete. * emulparams/sparcaout.sh: Delete. * emulparams/sparclinux.sh: Delete. * emulparams/sparcnbsd.sh: Delete. * emulparams/sun4.sh: Delete. * scripttempl/sparccoff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra4-9/+2
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-6/+1
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
generated by cgit v1.1 at 2024-11-26 10:03:59 +0000