aboutsummaryrefslogtreecommitdiff
path: root/binutils/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-12-31Add markers for 2.40 branchNick Clifton1-0/+2
2022-12-16Fix previous delta to allow for compilation on 32-bit systemsNick Clifton1-0/+4
2022-11-15binutils/NEWS: add text for SFrame supportIndu Bhagat1-0/+3
ChangeLog: * binutils/NEWS: Add item for SFrame support.
2022-10-31objdump: Add configure time option to enable colored disassembly output by ↵Nick Clifton1-0/+4
default. PR 29457 * configure.ac: Add --enable-colored-disassembly. * objdump.c: Add --disassembler-color=terminal. * doc/binutils.texi (objdump): Document the new option. * NEWS: Mention new feature. * config.in: Regenerate in. * configure: Regenerate.
2022-10-21Add a note to the binutils/NEWS file about DCO signed contributions.Nick Clifton1-0/+2
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song1-0/+6
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2022-08-23Add an option to dlltool to allow the creation of deterministic libraries.Nick Clifton1-0/+5
PR 29489 * dlltool.c (deterministic): New variable. (gen_lib_file): If deterministic is true set the BFD_DETERMINISTIC_OUTPUT flag. (usage): Mention --deterministic-libraries and --non-deterministic-libraries. (long_options): Add new options. (main): Parse new options. * doc/binutils.texi: Document the new options. * NEWS: Mention the new feature.
2022-07-08Add markers for 2.39 branchNick Clifton1-0/+3
2022-05-18Add a --no-weak option to nm.Nick Clifton1-0/+2
PR 29135 * nm.c (non_weak): New variable. (filter_symbols): When non-weak is true, ignore weak symbols. (long_options): Add --no-weak. (usage): Mention --no-weak. (main): Handle -W/--no-weak. * doc/binutils.texi: Document new feature. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Add test of new feature. * testsuite/binutils-all/no-weak.s: New test source file.
2022-04-04objdump/opcodes: add syntax highlighting to disassembler outputAndrew Burgess1-0/+4
This commit adds the _option_ of having disassembler output syntax highlighted in objdump. This option is _off_ by default. The new command line options are: --disassembler-color=off # The default. --disassembler-color=color --disassembler-color=extended-color I have implemented two colour modes, using the same option names as we use of --visualize-jumps, a basic 8-color mode ("color"), and an extended 8bit color mode ("extended-color"). The syntax highlighting requires that each targets disassembler be updated; each time the disassembler produces some output we now pass through an additional parameter indicating what style should be applied to the text. As updating all target disassemblers is a large task, the old API is maintained. And so, a user of the disassembler (i.e. objdump, gdb) must provide two functions, the current non-styled print function, and a new, styled print function. I don't currently have a plan for converting every single target disassembler, my hope is that interested folk will update the disassemblers they are interested in. But it is possible some might never get updated. In this initial series I intend to convert the RISC-V disassembler completely, and also do a partial conversion of the x86 disassembler. Hopefully having the x86 disassembler at least partial converted will allow more people to try this out easily and provide feedback. In this commit I have focused on objdump. The changes to GDB at this point are the bare minimum required to get things compiling, GDB makes no use of the styling information to provide any colors, that will come later, if this commit is accepted. This first commit in the series doesn't convert any target disassemblers at all (the next two commits will update some targets), so after this commit, the only color you will see in the disassembler output, is that produced from objdump itself, e.g. from objdump_print_addr_with_sym, where we print an address and a symbol name, these are now printed with styling information, and so will have colors applied (if the option is on). Finally, my ability to pick "good" colors is ... well, terrible. I'm in no way committed to the colors I've picked here, so I encourage people to suggest new colors, or wait for this commit to land, and then patch the choice of colors. I do have an idea about using possibly an environment variable to allow the objdump colors to be customised, but I haven't done anything like that in this commit, the color choices are just fixed in the code for now. binutils/ChangeLog: * NEWS: Mention new feature. * doc/binutils.texi (objdump): Describe --disassembler-color option. * objdump.c (disassembler_color): New global. (disassembler_extended_color): Likewise. (disassembler_in_comment): Likewise. (usage): Mention --disassembler-color option. (long_options): Add --disassembler-color option. (objdump_print_value): Use fprintf_styled_func instead of fprintf_func. (objdump_print_symname): Likewise. (objdump_print_addr_with_sym): Likewise. (objdump_color_for_disassembler_style): New function. (objdump_styled_sprintf): New function. (fprintf_styled): New function. (disassemble_jumps): Use disassemble_set_printf, and reset disassembler_in_comment. (null_styled_print): New function. (disassemble_bytes): Use disassemble_set_printf, and reset disassembler_in_comment. (disassemble_data): Update init_disassemble_info call. (main): Handle --disassembler-color option. include/ChangeLog: * dis-asm.h (enum disassembler_style): New enum. (struct disassemble_info): Add fprintf_styled_func field, and created_styled_output field. (disassemble_set_printf): Declare. (init_disassemble_info): Add additional parameter. (INIT_DISASSEMBLE_INFO): Add additional parameter. opcodes/ChangeLog: * dis-init.c (init_disassemble_info): Take extra parameter, initialize the new fprintf_styled_func and created_styled_output fields. * disassembler.c (disassemble_set_printf): New function definition.
2022-03-16objcopy --weaken-symbol: apply to STB_GNU_UNIQUE symbolsFangrui Song1-0/+2
PR binutils/28926 * objcopy.c (filter_symbols): Apply weaken to STB_GNU_UNIQUE symbols * NEWS: Mention feature. * testsuite/binutils-all/objcopy.exp (objcopy_test_symbol_manipulation): New test. * testsuite/binutils-all/weaken-gnu-unique.s: New.
2022-03-10Add option to objdump/readelf to disable access to debuginfod servers.Nick Clifton1-0/+3
* dwarf.c (use_debuginfod): New variable. Set to 1. (load_separate_debug_info): Only call debuginfod_fetch_separate_debug_info is use_debuginfod is true. (dwarf_select_sections_by_names): Add do-not-use-debuginfod and use-debuginfod options. (dwarf_select_sections_by_letters): Add D and E options. * dwarf.h (use_debuginfod): New extern. * objdump.c (usage): Mention the new options. * readelf.c (usage): Likewise. * doc/binutils.texi: Document the new options. * doc/debug-options.texi: Describe the new options. * NEWS: Mention the new feature. * testsuite/binutils-all/debuginfod.exp: Add tests of the new options.
2022-01-22Add markers for 2.38 branchNick Clifton1-0/+2
2022-01-11ar: Add --thin for creating thin archivesFangrui Song1-0/+4
In many ar implementations (FreeBSD, elfutils, etc), -T has the X/Open System Interface specified semantics. Therefore -T for thin archives is not recommended for portability. -T is deprecated without diagnostics. PR binutils/28759 * ar.c (long_options): Add --thin. (usage) Add --thin. Deprecate -T without diagnostics. * doc/binutils.texi: Add doc. * NEWS: Mention --thin. * binutils/testsuite/binutils-all/ar.exp: Add tests.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-11-23AArch64: Add support for AArch64 EFI (efi-*-aarch64).Tamar Christina1-0/+3
This adds support for efi-*-aarch64 by virtue of adding a new PEI target pei-aarch64-little. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based aarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. With these changes the resulting file is recognized as an efi image by third party tools: > pecli info hello.efi Metadata ================================================================================ MD5: 598c32a778b0f0deebe977fef8578c4e SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c Imphash: Size: 47561 bytes Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 ) Entry point: 0x2000 (section .text) Sections ================================================================================ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5 .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3 .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131 .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519 .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c Imports ================================================================================ Any magic number is based on the Microsoft PE specification [1]. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * .gitignore (pe-aarch64igen.c): New. * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c, pe-aarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little. * coff-aarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common, _bfd_peAArch64_bfd_copy_private_section_data, _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out, _bfd_peAArch64_print_private_bfd_data_common, _bfd_peAArch64i_final_link_postscript, _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in, _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in, _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in, _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out, _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out, _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out, _bfd_peAArch64i_write_codeview_record, _bfd_peAArch64i_slurp_codeview_record, _bfd_peAArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peAArch64, * pei-aarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peAArch64. (jtab): Add dummy entry that traps. * targets.c (aarch64_pei_vec): New. binutils/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * NEWS: Add new support. * objcopy.c (convert_efi_target): Add efi-*-aarch64 support. * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test. * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test. include/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * coff/aarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
2021-11-17elfedit: Add --output-abiversion option to update ABIVERSIONH.J. Lu1-0/+2
* NEWS: Mention --output-abiversion. * elfedit.c (input_elf_abiversion): New. (output_elf_abiversion): Likewise. (update_elf_header): Update EI_ABIVERSION. (command_line_switch): Add OPTION_INPUT_ABIVERSION and OPTION_OUTPUT_ABIVERSION. (options): Add --input-abiversion and --output-abiversion. (usage): Likewise. (main): Handle --input-abiversion and --output-abiversion. * doc/binutils.texi: Document --input-abiversion and --output-abiversion. * testsuite/binutils-all/elfedit.exp: Run elfedit-6. * testsuite/binutils-all/elfedit-6.d: New file.
2021-11-16readelf: Support SHT_RELR/DT_RELR for -rFangrui Song1-0/+2
The -r output for SHT_RELR looks like: Relocation section '.relr.dyn' at offset 0x530 contains 4 entries: 7 offsets 00000000000028c0 00000000000028c8 0000000000003ad0 0000000000003ad8 0000000000003ae0 0000000000003ae8 0000000000003af0 For --use-dynamic, the header looks like 'RELR' relocation section at offset 0x530 contains 32 bytes: include/ * elf/common.h (DT_ENCODING): Bump to 38. * elf/external.h (Elf32_External_Relr): New. (Elf64_External_Relr): New. binutils/ * readelf.c (enum relocation_type): New. (slurp_relr_relocs): New. (dump_relocations): Change is_rela to rel_type. Dump RELR. (dynamic_relocations): Add DT_RELR. (process_relocs): Check SHT_RELR and DT_RELR. (process_dynamic_section): Store into dynamic_info for DT_RELR/DT_RELRENT/DT_RELRSZ.
2021-11-09Add --unicode option to control how unicode characters are handled by ↵Nick Clifton1-0/+9
display tools. * nm.c: Add --unicode option to control how unicode characters are handled. * objdump.c: Likewise. * readelf.c: Likewise. * strings.c: Likewise. * binutils.texi: Document the new feature. * NEWS: Document the new feature. * testsuite/binutils-all/unicode.exp: New file. * testsuite/binutils-all/nm.hex.unicode * testsuite/binutils-all/strings.escape.unicode * testsuite/binutils-all/objdump.highlight.unicode * testsuite/binutils-all/readelf.invalid.unicode
2021-10-24LoongArch binutils supportliuzhensong1-0/+2
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> binutils/ * NEWS: Mention LoongArch support. * readelf.c: Add LoongArch. * testsuite/binutils-all/objdump.exp: Add LoongArch.
2021-07-03Add markers for 2.37 branchNick Clifton1-0/+2
2021-04-21Add ability to select numeric base when displaying symbol values in readelf.Nick Lott1-0/+6
PR 27672 * readelf.c (sym_base): New variable. (enum print_mode): Add more modes. (print_vma): Add suport for new modes. (options): Add sym-base. (usage): Add sym-base. (parse_args): Add support for --sym-base. (print_dynamic_symbol_size): New function. (print_dynamic_symbol): Use new function. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2021-04-06C99 NEWS and READMEAlan Modra1-0/+2
* NEWS: Mention C99 requirement. * README: Likewise. Modernise examples and "Reporting bugs".
2021-03-15Add a symbols-only mode to nm.Nick Clifton1-0/+4
PR 27487 * nm.c (FORMAT_JUST_SYMBOLS): Define. (struct optput_fns): Add entry for FORMAT_JUST_SYMBOLS. (long_options): Add just-symbols. (set_output_format): Add support for just-symbols. (get_print_format): Likewise. (do_not_print_object_filename): New function. (do_not_print_archive_filename): New function. (do_not_print_archive_member): New function. (do_not_print_symbol_filename): New function. (just_print_symbol_name): New function. (main): Handle --just-symbols. * NEWS: Mention the new feature. * doc/binutils.texi: Document the new feature.
2021-03-04Gate the displaying of non-debug sections in separate debuginfo files.Nick Clifton1-0/+24
PR 27478 * objdump.c (process_links): New variable. (usage): Add --process-links. (long_options): Likewise. (dump_bfd): Stop processing once the bfd has been loaded unless this is the main file or process_links has been enabled. (main): Handle the process-links option. * readelf.c (process_links): New variable. (struct filedata): Add is_separate field. (options): Add --process-links. (usage): Likewise. (parse_args): Likewise. (process_file_header): Include the filename when dumping information for separate debuginfo files. (process_program_headers): Likewise. (process_section_headers): Likewise. (process_section_groups): Likewise. (process_relocs): Likewise. (process_dynamic_section): Likewise. (process_version_sections): Likewise. (display_lto_symtab): Likewise. (process_symbol_table): Likewise. (process_syminfo): Likewise. (initialise_dumps_by_name): Likewise. (process_section_contents): Likewise. (process_notes_at): Likewise. (process_notes): Likewise. (open_file): Add is_separate parameter. Use to initialise the is_separate field in the filedata structure. (open_deug): Update call to open_file. (process_object): Add processing of the contents of separate debuginfo files, gated by the process_links variable. (process_archive): Update call to open_file. (process_file): Initialise the is_separate field in the filedata structure. * dwarf.c (load_separate_debug_info_file): Only report the loading of a separate file if debug links are being dumped. * objcopy.c (keep_section_symbols): New variable. (enum command_line_switch): Add OPTION_KEEP_SYMBOLS. (strip_options): Add keep-section-symbols. (copy_options): Likewise. (copy_usage): Likewise. (strip_usage): Likewise. (copy_object): Keep section symbols if requested by command line option. (strip_main): Handle --keep-section-symbols. (copy_main): Likewise. * doc/binutils.texi: Document the new options. * NEWS: Mention the new features. * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Update options passed to objdump. Use diff rather than cmp to compare the dumped data. * testsuite/binutils-all/objdump.WK2: Update regexp. * testsuite/binutils-all/objdump.WK3: Update regexp. * testsuite/binutils-all/objdump.exp: Use --process-links instead of --dwarf=follow-links. * testsuite/binutils-all/readelf.exp (readelf_test): Include readelf's output in the log when the test fails. Add the -P option to the -wKis test. * testsuite/binutils-all/readelf.wKis: Update expected output.
2021-03-03PR27493, objcopy --weaken-symbol does not weaken undefined symbolsAlan Modra1-0/+3
PR 27493 * objcopy.c (filter_symbols): Apply --weaken to undefined symbols. * NEWS: Mention feature.
2021-02-26nm: Add --quiet to suppress "no symbols" diagnosticFangrui Song1-0/+3
PR binutils/27408 * readelf.c (quiet): New option flag. (enum long_option_values): New enum to hold long option value. (long_options): Add --quiet. (usage): Mention --quiet. (display_rel_file): If quiet is enabled, suppress "no symbols". (main): Handle the new option. * NEWS: Mention --quiet. * docs/binutils.texi: Document --quiet.
2021-02-25Add initial support for .debug_sup sections.Nick Clifton1-0/+3
* dwarf.c (get_type_abbrev_from_form): Accept but ignore sup forms. (read_and_display_attr_value): Handle sup forms. (display_debug_sup): New function. Displays the contents of a .debug_sup section. (load_debug_sup_file): New function. Loads the contents of a file referenced by a .debug_sup section. (check_for_and_load_links): Call load_debug_sup_file. (debug_displays): Add entry for .debug_sup. * dwarf.h (enum dwarf_section_display_enum): Add debug_sup. * readelf.c (process_section_headers): Add support for debug_sup. * doc/debug.options.texi: Note that the =links option will display the contents of .debug_sup sections. * NEWS: Mention the new support.
2021-02-12Change the readelf and objdump programs so that they will automatically ↵Nick Clifton1-0/+7
follow links to separate debug info files. * configure.ac (follow-debug-links): Add option to enable or disable the following of debug links by default. Set the default for the option to be 'follow'. * dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS. (dwarf_select_sections_by_names): Add no-follow-links option. (dwarf_select_sections_by_letter): Add 'N' option. * objdump.c (usage): Add conditional text describing the follow links option. (slurp_symtab): Ensure that there is a NULL entry at the end of the symbol table. (slurp_dynamic_symtab): Likewise. (dump_bfd): When extending the symbol table, ensure that there is still a NULL entry at the end. * readelf.c (usage): Add conditional text describing the follow links option. * doc/binutils.texi: Update documentation for objcopy and readelf. * doc/debug.options.texi: Update documentation of the follow-links option. * config.in: Regenerate. * configure: Regenerate. * testsuite/binutils-all/compress.exp: Add the -WN option to objdump command lines that are not expecting to follow links. * testsuite/binutils-all/readelf.exp: Add the --debug-dump=no-follow-links option to tests that are not expecting to follow debug links. gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link following. * testsuite/gas/xgate/insns-dwarf2.d: Likewise. ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically following debug links.
2021-01-09Add Changelog entries and NEWS entries for 2.36 branchNick Clifton1-0/+2
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-12-23x86-64: Add Intel LAM property supportH.J. Lu1-0/+2
Add Intel Linear Address Masking (LAM) property support. LAM modifies the checking that is applied to 64-bit linear addresses, allowing software to use of the untranslated address bits for metadata. bfd/ * elf-linker-x86.h (elf_x86_cet_report): Renamed to ... (elf_x86_prop_report): This. (elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report and lam_u57_report. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and GNU_PROPERTY_X86_FEATURE_1_LAM_U57. (_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only for 64-bit output. binutils/ * NEWS: Mention LAM_U48 and LAM_U57 support. * elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57. (usage): Add lam_u48 and lam_u57. * readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57. * doc/binutils.texi: Update elfedit with lam_u48 and lam_u57 support. * testsuite/binutils-all/x86-64/lam-u48.d: New file. * testsuite/binutils-all/x86-64/lam-u48.s: Likewise. * testsuite/binutils-all/x86-64/lam-u57.d: Likewise. * testsuite/binutils-all/x86-64/lam-u57.s: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New. (GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise. ld/ * NEWS: Mention LAM_U48 and LAM_U57 support. * ld.texi: Document LAM_U48 and LAM_U57 support. * emulparams/cet.sh: Updated. * emulparams/elf_x86_64.sh: Source x86-64-lam.sh. * emulparams/x86-64-lam.sh: New file. * testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run LAM tests.
2020-11-20Add option to nm to change the characters displayed for ifunc symbols. Add ↵Nick Clifton1-0/+9
a configure time option to change the default characters. PR 22967 * nm.c (ifunc_type_chars): New variable. (long_options): Add --ifunc-chars. (print_symbol): Use ifunc_type_chars for ifunc symbols. (main): Handle the new option. * doc/binutils.texi: Document the new option. * configure.ac: Add --enable-f-for-ifunc-symbols option which changes the default symbol displayed by nm. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Test the new feature. * config.in: Regenerate. * configure: Regenerate.
2020-11-18Support SHF_GNU_RETAIN ELF section flagJozef Lawrynowicz1-0/+4
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ | Name | Value | +-------------------------------------+ | SHF_GNU_RETAIN | 0x200000 (1 << 21) | +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test.
2020-11-03Add an option to the archiver to add a section recording library dependencies.Howard Chu1-0/+5
* ar.c (long_options): Add --record-libdeps. (usage): Mention the new option. (decode_options): Handle the new option. (replace_members): If necessary, create a bfd to hold the libdeps description. * binemul.c (ar_emul_append_bfd): New function. (ar_emul_replace_bfd): New function. (ar_emul_default_append): Replace file_name and target arguments with new_bfd argument. (ar_emul_default_replace): Likewise. * binemul.h: Update prototypes. (struct bin_emulation_xfer_struct): Update fields. * doc/binutils.texi: Document the new option. * NEWS: Mention the new feature. * emul_aix.c (ar_emul_aix_append): Update. (ar_emul_aix_replace): Likewise. * testsuite/binutils-all/ar.exp: Add test of new feature.
2020-10-19Readelf: Add --lto-syms option to display LTO symbol tables.Nick Clifton1-0/+3
* readelf.c (do_lto_syms): New local. (long_option_values): Add OPTION_LTO_SYMS. (options): Add --lto-syms. (usage): Mention the new option. (parse_args): Parse the new option. (get_lto_kind): New function. (get_lto_visibility): New function. (get_lto_sym_type): New function. (display_lto_symtab): New function - displays the contents of an LTo symbol table section. (process_lto_symbol_tables): New functions. Calls dipslay_lto_symtab on any LTO symbol table section. (process_object_file): Call process_lto_symbol_tables. * doc/binutils.texi: Document the new option. * NEWS: Mention the new feature.
2020-08-12Add demangling support to readelf.Nick Clifton1-0/+4
PR binutils/26331 * readelf.c (do_demangle): New option flag. (print_symbol): If do_demangle is enabled, demangle the symbol. (enum long_option_values): New enum to hold long option values. (options): Add demangle, no-demangle, recursion-limit and no-recursion-limit options. Alpha sort the table. (usage): Describe the new options. (parse_args): Handle the new options. * NEWS: Mention the new feature. * doc/binutils.texi: Document the new feature. * testsuite/binutils-all/readelf.exp: Test the new feature. * testsuite/binutils-all/mangled.s: New file - assembler source. * testsuite/binutils-all/readelf.demangled: New file - expected output from readelf.
2020-07-04Add markers for binutils 2.35 branchNick Clifton1-0/+2
2020-07-02Change readelf's display of symbol names (when not in --wide mode) so that ↵Nick Clifton1-0/+6
if they are going to be truncated then "[...]" is displayed at the end. Add a comment line option to disable this enhancement and restore the old behaviour. PR 26028 binutils* readelf.c (print_symbol): Handle truncation of symbol names. (options): Add -T/--silent-truncation option. (parse_args): Handle the option. (print_dynamic_symbol): Correct calculation of width available to display symbol name. * doc/binutils.texi: Document the -T option to readelf. * NEWS: Mention the new feature. gas * testsuite/gas/ia64/group-2.d: Add -T option to readelf command line. * testsuite/gas/ia64/unwind.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/bspec-2.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. ld * testsuite/ld-powerpc/powerpc.exp: Add -T option to readelf command line when running some tests. * testsuite/ld-arm/arm-elf.exp: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise.
2020-06-30Remove x86 NaCl target supportH.J. Lu1-0/+2
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-04-29Add a warning if an emtpty SHT_REL, SHT_RELA or SHT_PROGBITS section is ↵Nick Clifton1-0/+6
detected. Disable all warnings unless the (new) lint mode is enabled. * readelf.c (warn): New function - like elfcomm.c version but only produces output if warnings are enabled. (struct options): Add --lint and --enable-checks. (usage): Add entry for --lint. (parse_args): Handle -L. If checks are enabled but no dumps have been selected then enable all dumps. (process_section_headers): Replace long if-then-else sequence with a switch. Add warning messages for empty SHT_REL, SHT_RELA and SHT_PROGBITS sections. (process_file): Do not complain if the file is an archive and lint mode has been enabled. * elfcomm.c (error): Make the function weak. (warn): Likewise. * NEWS: Mention the new feature. * doc/binutils.texi: Document the new feature. * dwarf.h (report_leb_status): Add file name and line number parameters. Include them in the diagnostic output. (READ_ULEB): Pass file and line number to report_leb_status. (READ_SLEB): Likewise. * dwarf.c (read_and_print_leb128): Pass file and line number to report_leb_status. * testsuite/binutils-all/readelf.exp: Add test of new feature. * testsuite/binutils-all/zero-sec.s: New test source file. * testsuite/binutils-all/zero-sec.r: Expected output from new test.
2020-01-18Add markers for 2.34 branch to the NEWS files and ChangeLogs.Nick Clifton1-0/+2
2020-01-13Add an option to objdump's disassembler to generate ascii art diagrams ↵Thomas Troeger1-0/+19
showing the destinations of flow control instructions. binutils* objdump.c (visualize_jumps, color_output, extended_color_output) (detected_jumps): New variables. (usage): Add the new jump visualization options. (option_values): Add new option value. (long_options): Add the new option. (jump_info_new, jump_info_free): New functions. (jump_info_min_address, jump_info_max_address): Likewise. (jump_info_end_address, jump_info_is_start_address): Likewise. (jump_info_is_end_address, jump_info_size): Likewise. (jump_info_unlink, jump_info_insert): Likewise. (jump_info_add_front, jump_info_move_linked): Likewise. (jump_info_intersect, jump_info_merge): Likewise. (jump_info_sort, jump_info_visualize_address): Likewise. (disassemble_jumps): New function - used to locate jumps. (disassemble_bytes): Add ascii art generation. (disassemble_section): Add scan to locate jumps. (main): Parse the new visualization option. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature. opcodes * arm-dis.c (print_insn_arm): Fill in insn info fields for control flow instructions. (print_insn_thumb16, print_insn_thumb32): Likewise. (print_insn): Initialize the insn info. * i386-dis.c (print_insn): Initialize the insn info fields, and detect jumps.
2020-01-09Add support for debuginfod to the binutils (disable by default, enabled via ↵Aaron Merey1-0/+9
a configure time option). debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables objdump and readelf to query debuginfod servers when they are otherwise not able to find separate debug files. Binutils can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod. * Makefile.in: Regenerate. * NEWS: Update. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. * doc/Makefile.in: Regenerate. * doc/binutils.texi: Add section on using binutils with debuginfod. * dwarf.c (debuginfod_fetch_separate_debug_info): New function. Query debuginfod servers for the target debug file. (load_separate_debug_info): Call debuginfod_fetch_separate_debug_info if configured with debuginfod. (load_separate_debug_files): Add file argument to load_separate_debug_info calls. * dwarf.h (get_build_id): Add declaration. * objdump.c (get_build_id): New function. Get build-id of file. * readelf.c (get_build_id): Likewise. * testsuite/binutils-all/debuginfod.exp: New tests. * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id section.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-11-04Implement objcopy/strip --keep-section=<sectionpattern>Fāng-ruì Sòng1-0/+3
llvm-objcopy and llvm-strip support an option --keep-section that keeps some sections from being removed. * objcopy.c (enum option_values): Add OPTION_KEEP_SECTION. (SECTION_CONTEXT_KEEP): Define. Adjust other SECTION_CONTEXT macros. (copy_usage): Describe --keep-section. (strip_usage): Likewise. (copy_main): Handle SECTION_CONTEXT_KEEP. (strip_main): Likewise. (is_strip_section_1): Likewise. * testsuite/binutils-all/objcopy.exp: Add tests. * testsuite/binutils-all/keep-section-1.d: New test driver file. * testsuite/binutils-all/keep-section-2.d: Likewise. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2019-10-30Add a --output=<DIR> option to ar to allow the specifying of an output ↵Fangrui Song1-0/+3
directory. * ar.c (emum long option numbers): Declare. Use to provide numerical values for long options. (long_options): Add --output option. (usage): Mention the --output option. (open_output_file): New function. Create a filepath for an output file and open it. (extract_file): Use open_output_file(). (open_output_file): * testsuite/binutils-all/ar.exp: Add a test of the new feature. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
2019-09-09Add markers for 2.33 branch to NEWS and ChangeLog files.Phil Blundell1-0/+3
2019-08-28Add an option to objcopy to change the alignment of sections.Niklas G?rtler1-0/+3
PR 24942 * objcopy.c (SECTION_CONTEXT_SET_ALIGNMENT): New constant. (struct section_list): Add alignment field. (command_line_switch): Add OPTION_SET_SECTION_ALIGNMENT. (copy_options): Add --set-section-alignment. (copy_usage): Describe --set-section-alignment. (find_section_list): Initialise the alignment field. (setup_section): Handle the alignment field. (copy_main): Handle OPTION_SET_SECTION_ALIGNMENT. * doc/binutils.texi: Document the new feature. * NEWS: Mention the new feature.
generated by cgit v1.1 at 2025-02-02 10:34:01 +0000