aboutsummaryrefslogtreecommitdiff
path: root/bfd
AgeCommit message (Collapse)AuthorFilesLines
2017-07-02Automatic date update in version.inGDB Administrator1-1/+1
2017-07-01Automatic date update in version.inGDB Administrator1-1/+1
2017-06-30Automatic date update in version.inGDB Administrator1-1/+1
2017-06-29RISC-V: Fix TLS copy relocsAndrew Waterman2-4/+11
The dynrelro introduction wasn't implemented quite right for RISC-V, as it didn't consider TLS copy relocs. bfd/ChangeLog 2017-06-29 Andrew Waterman <andrew@sifive.com> * elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Fix TLS copy relocs.
2017-06-29bfd: prevent all but undef weak syms from becoming dynamic in sparc.Egeyar Bagcioglu2-20/+57
Prevent sparc backend making symbols dynamic unless they are undefined weak. Use R_SPARC_RELATIVE for the symbols which are not dynamic in PIC. This patch is tested on sparc64-unknown-linux-gnu, no regressions are found. bfd/ChangeLog: 2017-06-29 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com> * elfxx-sparc.c (allocate_dynrelocs): Don't make a symbol dynamic unless it is undefined weak. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Set the flag relative_reloc to direct non-dynamic symbols to R_SPARC_RELATIVE relocation. * elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): If symbol is not dynamic in PIC, abort.
2017-06-29[AArch64] Only override the symbol dynamic decision on undefined weak symbolJiong Wang2-23/+68
This fix is an adaption of the x86-64 PR ld/21402 fix to AArch64. After the generic code deciding one symbol is not dynamic, AArch64 backend only overrides the decision on undefined weak symbols. bfd/ PR ld/21402 * elfnn-aarch64.c (elfNN_aarch64_allocate_dynrelocs): Only make undefined weak symbols into dynamic. (elfNN_aarch64_final_link_relocate): Generate runtime RELATIVE relocation for non-dynamic symbols. (elfNN_aarch64_finish_dynamic_symbol): Add sanity check.
2017-06-29[AArch64] Remove duplicated code when handling some GOT relocations typesJiong Wang3-92/+36
There are quite a few duplicated code supporting several GP based relocation types. They are: BFD_RELOC_AARCH64_LD64_GOTOFF_LO15 BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC BFD_RELOC_AARCH64_MOVW_GOTOFF_G1 These relocation types are supposed to be used for large memory model PIC/pic mode under which we will have an initialized GP register points to the base of GOT table, then these relocations are supposed to put the distance between GOT entry and GOT table base address into the related instructions. So, the parameters required to calculate the relocation should be the same as BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15 etc, all of them are require the GOT entry address and GOT table base address to perform the relocation. This patch has removed those duplicated code when handling above listed relocation types, grouped them with others as relocation types that are require GOT table base address during performing relocation, reused the existed GOT handling code. The relocation calculation for these types before and after this patch should be identical. bfd/ * elfnn-aarch64.c (aarch64_relocation_aginst_gp_p): New function. (elfNN_aarch64_final_link_relocate): Delete duplicated code for BFD_RELOC_AARCH64_LD64_GOTOFF_LO15, BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC, BFD_RELOC_AARCH64_MOVW_GOTOFF_G1. * elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Optimize the support for them.
2017-06-29S390: Support guarded-storage core note sectionsAndreas Arnez3-0/+71
Newer Linux kernel versions offer two new register sets in support of the z/Architecture's guarded storage facility: NT_S390_GS_CB, the "guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage broadcast control block". This patch adds support for the respective core notes sections to binutils. bfd/ChangeLog: * elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype. (elfcore_write_s390_gs_bc): Likewise. * elf.c (elfcore_grok_s390_gs_cb): New function. (elfcore_grok_s390_gs_bc): New function. (elfcore_grok_note): Call them. (elfcore_write_s390_gs_cb): New function. (elfcore_write_s390_gs_bc): New function. (elfcore_write_register_note): Call them. binutils/ChangeLog: * readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC. include/ChangeLog: * elf/common.h (NT_S390_GS_CB): New macro. (NT_S390_GS_BC): Likewise.
2017-06-29Automatic date update in version.inGDB Administrator1-1/+1
2017-06-28Don't call bfd_get_file_size in _bfd_generic_get_section_contentsH.J. Lu2-7/+16
Since it is impossible to read beyond the end of normal files, we only need to check archive element size in _bfd_generic_get_section_contents * libbfd.c (_bfd_generic_get_section_contents): Don't call bfd_get_file_size. Check archive element size. (_bfd_generic_get_section_contents_in_window): Likewise.
2017-06-28Change bfd_get_size/bfd_get_file_size to ufile_ptrH.J. Lu3-6/+12
bfd_get_size and bfd_get_file_size should return the unsigned file size. Otherwise they return negative values for file >= 2GB with 32-bit ufile_ptr. bfd/ * bfd-in2.h: Regenerated. * bfdio.c (bfd_get_size): Change return type to ufile_ptr. (bfd_get_file_size): Likewise. binutils/ * objdump.c (dump_relocs_in_section): Cast to ufile_ptr when comparing against bfd_get_file_size return.
2017-06-28MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor supportMaciej W. Rozycki5-0/+38
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.
2017-06-28Automatic date update in version.inGDB Administrator1-1/+1
2017-06-27Remove debugging accidentally left in tekhex.c.Nick Clifton2-1/+6
* tekhex.c (pass_over): Revert accidental conversion of a local array to a static array.
2017-06-27Fix PR 13402Senthil Kumar Selvaraj2-1/+11
Fix incorrect adjustment of diff relocs when relaxing, and thus the resulting source line to address mismatch. Fix two issues when adjusting diff relocs to account for deleted bytes. 1. Don't adjust the difference if the end address is the shrinked insn's address i.e. use < instead of <=. The relaxation code deletes count bytes from or after shrinked_insn_address, so the difference between start_address and end_address should remain unchanged in this case. 2. Adjust the reloc addend if the difference is to be adjusted and symval + reloc addend is past the shrinked insn address. This is because for a typical sym1 - sym2 diff reloc, sym1 is .text + irel->r_addend, and the addend should be reduced to account for the shrinked insn. For example, assume the reloc value is .text + 0x8 with .text = 0, the diff value in the object file = 0x4, and shrinked_insn_address = 0x4 with count = 0x2. Then the existing code writes 0x2 into the object file to account for the deleted bytes, as shrinked_insn_address lies between 0x8 and 0x8 - 0x4 = 0x4, but leaves the addend as is. The next time the reloc is looked at, the code sees if a shrinked_insn_address lies between 0x8 and 0x8 - 0x2 = 0x6, instead of 0x6 and 0x4. If there happens to be one, then the diff value in the object file ends up getting reduced again. bfd/ 2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> PR ld/13402 * elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Adjust reloc addend if necessary. Adjust diff only if shrinked_insn_address < end_address. ld/ 2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com> PR ld/13402 * testsuite/ld-avr/pr13402.d: New test. * testsuite/ld-avr/pr13402.s: New test.
2017-06-27Warning fixAlan Modra2-5/+11
PR binutils/21665 * libbfd.c (_bfd_generic_get_section_contents): Warning fix. (_bfd_generic_get_section_contents_in_window): Likewise.
2017-06-26RISC-V: Use pc-relative relocation for FDE initial locationKuan-Lin Chen6-0/+32
The symbol address in .eh_frame may be adjusted in _bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert a relocation whose addend symbol is in .eh_frame. Othrewise, the value may be adjusted twice. bfd/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elfnn-riscv.c (perform_relocation): Support the new R_RISCV_32_PCREL relocation. (riscv_elf_relocate_section): Likewise. * elfxx-riscv.c (howto_table): Likewise. (riscv_reloc_map): Likewise. * bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation. * libbfd.h: Regenerate. gas/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a R_RISCV_32_PCREL relocation. include/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elf/riscv.h (R_RISCV_32_PCREL): New.
2017-06-27More fixes for bfd_get_section_contents changeAlan Modra2-14/+12
PR binutils/21665 * libbfd.c (_bfd_generic_get_section_contents): Delete abort. Use unsigned file pointer type, and remove cast. * libbfd.c (_bfd_generic_get_section_contents_in_window): Likewise. Add "count", not "sz".
2017-06-27Automatic date update in version.inGDB Administrator1-1/+1
2017-06-27Fix GDB regressions caused by previous bfd_get_section_contents changesPedro Alves2-1/+7
Ref: https://sourceware.org/ml/binutils/2017-06/msg00343.html bfd/ChangeLog: 2017-06-26 Pedro Alves <palves@redhat.com> PR binutils/21665 * libbfd.c (_bfd_generic_get_section_contents): Add "count", not "sz".
2017-06-26Add a missing line to _bfd_generic_get_section_contents_in_windowH.J. Lu2-0/+7
PR binutils/21665 * libbfd.c (_bfd_generic_get_section_contents_in_window): Add a missing line.
2017-06-26MIPS/BFD: Consistently mark the LSI CW4010 as a MIPS II processorMaciej W. Rozycki3-6/+14
Make BFD agree with GAS and mark the LSI MiniRISC CW4010 processor core (for an odd reason referred to as LSI R4010 across our code base) as a MIPS II processor in BFD as well, fixing a bug that has been there since forever and addressing linker warnings like: $ as -m4010 empty.s -o 4010.o $ ld -r 4010.o -o 4010-r.o ld: 4010.o: warning: Inconsistent ISA between e_flags and .MIPS.abiflags $ due to the ISA level being recorded as MIPS III in ELF file header's `e_flags' vs MIPS II in the MIPS ABI Flags section: $ readelf -Ah 4010.o ELF Header: Magic: 7f 45 4c 46 01 02 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: REL (Relocatable file) Machine: MIPS R3000 Version: 0x1 Entry point address: 0x0 Start of program headers: 0 (bytes into file) Start of section headers: 348 (bytes into file) Flags: 0x20821000, 4010, o32, mips3 Size of this header: 52 (bytes) Size of program headers: 0 (bytes) Number of program headers: 0 Size of section headers: 40 (bytes) Number of section headers: 11 Section header string table index: 10 Attribute Section: gnu File Attributes Tag_GNU_MIPS_ABI_FP: Hard float (double precision) MIPS ABI Flags Version: 0 ISA: MIPS2 GPR size: 32 CPR1 size: 32 CPR2 size: 0 FP ABI: Hard float (double precision) ISA Extension: LSI R4010 ASEs: None FLAGS 1: 00000000 FLAGS 2: 00000000 $ Available documentation[1][2] clearly indicates the LSI CW4010 processor is only backwards compatible with the MIPS R4000 processor as far as the latter's 32-bit instructions are concerned and consequently can only be considered a MIPS II ISA implementation (with vendor extensions). This fixes an LD testsuite failure: FAIL: MIPS incompatible objects: "-march=r4010 -32" "-march=r4650 -32" triggered for the `mips-sgi-irix5' and `mips-sgi-irix6' targets. References: [1] Paul Cobb, Bob Caulk, Joe Cesana, "The MiniRISC CW4010: A Superscalar MIPS Processor ASIC Core", LSI Logic, July 1995, presented at Hot Chips VII, Stanford University, Stanford, California, August 1995 [2] "MiniRISC MR4010 Superscalar Microprocessor Reference Device", LSI Logic, November 1996, Doc. No. DB09-000028-00, Order No. C15017 bfd/ * cpu-mips.c (arch_info_struct): Mark the 4010 32-bit. * elfxx-mips.c (mips_set_isa_flags) <bfd_mach_mips4010>: Set E_MIPS_ARCH_2 rather than E_MIPS_ARCH_3 in `e_flags'. (mips_mach_extensions): Mark `bfd_mach_mips4010' as extending `bfd_mach_mips6000' rather than `bfd_mach_mips4000'. ld/ * testsuite/ld-mips-elf/lsi-4010-isa.d: New test. * ld/testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
2017-06-26Check file size before getting section contentsH.J. Lu3-9/+26
Don't check the section size in bfd_get_full_section_contents since the size of a decompressed section may be larger than the file size. Instead, check file size in _bfd_generic_get_section_contents. PR binutils/21665 * compress.c (bfd_get_full_section_contents): Don't check the file size here. * libbfd.c (_bfd_generic_get_section_contents): Check for and reject a section whoes size + offset is greater than the size of the entire file. (_bfd_generic_get_section_contents_in_window): Likewise.
2017-06-26LD: Fix .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIXMaciej W. Rozycki1-0/+2
Correct .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIX targets, complementing commit dc74becf498f ("ld: Add tests for -Ur") and commit da614360f520 ("ld: Add tests for .startof.SECNAME/.sizeof.SECNAME") with subsequent updates, and in reference to commit cbd0eecf261c ("Always define referenced __start_SECNAME/__stop_SECNAME") and commit 7dba9362c172 ("Rewrite __start and __stop symbol handling"). These targets set the STT_OBJECT type for non-function symbol references, according to `elf_frob_symbol' code in gas/config/obj-elf.c: /* The Irix 5 and 6 assemblers set the type of any common symbol and any undefined non-function symbol to STT_OBJECT. We try to be compatible, since newer Irix 5 and 6 linkers care. However, we only set undefined symbols to be STT_OBJECT if we are on Irix, because that is the only time gcc will generate the necessary .global directives to mark functions. */ if (S_IS_COMMON (symp)) symbol_get_bfdsym (symp)->flags |= BSF_OBJECT; if (strstr (TARGET_OS, "irix") != NULL && ! S_IS_DEFINED (symp) && (symbol_get_bfdsym (symp)->flags & BSF_FUNCTION) == 0) symbol_get_bfdsym (symp)->flags |= BSF_OBJECT; and consequently entries in the symbol table listing from `readelf' produced with these tests do not match the NOTYPE pattern expected, causing test suite failures: FAIL: ld-elf/sizeofa FAIL: ld-elf/sizeofc FAIL: ld-elf/startofa FAIL: ld-elf/startofc specifically with the `mips-sgi-irix5' and `mips-sgi-irix6' targets. Given that it does not matter for the feature covered by these tests whether the type of the symbols produced is STT_NOTYPE or STT_OBJECT adjust the problematic cases to accept either type, removing the failures observed. ld/ * testsuite/ld-elf/sizeofa.d: Also accept the OBJECT type for the symbols examined. * testsuite/ld-elf/sizeofc.d: Likewise. * testsuite/ld-elf/startofa.d: Likewise. * testsuite/ld-elf/startofc.d: Likewise.
2017-06-26Fix address violation parsing a corrupt texhex format file.Nick Clifton2-1/+11
PR binutils/21670 * tekhex.c (getvalue): Check for the source pointer exceeding the end pointer before the first byte is read.
2017-06-26Fix address violations when atempting to parse fuzzed binaries.Nick Clifton4-3/+35
PR binutils/21665 bfd * opncls.c (get_build_id): Check that the section is beig enough to contain the whole note. * compress.c (bfd_get_full_section_contents): Check for and reject a section whoes size is greater than the size of the entire file. * elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not contain a notes section. binutils* objdump.c (disassemble_section): Skip any section that is bigger than the entire file.
2017-06-26Add pgste marker changelogAndreas Krebbel1-0/+11
2017-06-26S/390: Fix testsuite segfault added with recent pgste patch.Andreas Krebbel2-7/+25
The recent pgste patch caused several testcases to fail with a segfault. Fixed with this patch by adding NULL pointer checks. regression-tested on s390x. bfd/ChangeLog: 2017-06-26 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * elf64-s390.c (elf_s390_additional_program_headers): Add NULL pointer checks. (elf_s390_modify_segment_map): Likewise. (bfd_elf_s390_set_options): Lisewise.
2017-06-26Automatic date update in version.inGDB Administrator1-1/+1
2017-06-26Don't attach linker created section to --just-syms bfdAlan Modra2-4/+47
All sections on a --just-syms bfd are discarded from the output, so attaching linker created sections to such a bfd results in errors. In other cases, like the .note.GNU-stack check, it's wrong to have a --just-syms object potentially affect the output. bfd/ * elflink.c (_bfd_elf_link_create_dynstrtab): Don't make dynobj a --just-syms bfd. (_bfd_elf_size_group_sections): Skip --just-syms bfds. (bfd_elf_size_dynamic_sections): Ignore .note.GNU-stack and .preinit_array on --just-syms bfds. (_bfd_elf_gc_mark_extra_sections): Skip --just-syms bfds. (elf_gc_sweep, bfd_elf_parse_eh_frame_entries): Likewise. (bfd_elf_gc_sections, bfd_elf_discard_info): Likewise. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Skip --just-syms bfds when looking for a place to attach .note.gnu.build-id and .eh_frame_hdr sections. Delete dead code.
2017-06-25fix out-of-bounds access in elf.c:find_linkSergei Trofimovich2-2/+8
The out-of-bounds access is reproducible on 'ia64-strip' command (see sample from https://bugs.gentoo.org/show_bug.cgi?id=622500) The output file contains less section than original one. This tricks 'hint' access to go out-of-bounds: * elf.c (find_link): Bounds check "hint".
2017-06-25Automatic date update in version.inGDB Administrator1-1/+1
2017-06-24[ARM] Add linker support for ARMv8-RThomas Preud'homme2-17/+42
=== Context === This patch is part of a patch series to add support for ARMv8-R architecture. Its purpose is to add support for ARMv8-R in the linker. === Patch description === This patch is composed of 3 changes: 1) The main change is the addition of the logic for merging a file whose Tag_CPU_arch build attribute is 15 (ARMv8-R). Namely, all pre-ARMv8 are merged into ARMv8-R as well as ARMv8-R itself. ARMv8-A (14) merges into ARMv8-A. ARMv8-M Baseline (16) and Mainline (17) are not allowed to merge merge with ARMv8-R. Note that merging only occurs if the two profiles are identical or one is S (Application or Realtime) and the other is R. 2) using_thumb_only, using_thumb2_bl, using_thumb2 and arch_has_arm_nop are updated according to capabilities of ARMv8-R and their BFD_ASSERT updated to reflect that the logic is valid for ARMv8-R. 3) 2 build attribute merging tests are added to test the first change. 2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (using_thumb_only): Update list of architectures in BFD_ASSERT for which the logic is valid. (using_thumb2_bl): Likewise. (using_thumb2): Likewise and return true for ARMv8-R. (arch_has_arm_nop): Likewise. (tag_cpu_arch_combine): New v8r table for ARMv8-R Tag_CPU_arch merging logic. Update commentis for value 15 of v8m_baseline, v8m_mainline and v4t_plus_v6_m arrays. Use v8r array to decide merging of value 15 of Tag_CPU_arch. ld/ * testsuite/ld-arm/arm-elf.exp (EABI attribute merging 11): New test. (EABI attribute merging 12): Likewise. * testsuite/ld-arm/attr-merge-11a.s: New file. * testsuite/ld-arm/attr-merge-11b.s: New file. * testsuite/ld-arm/attr-merge-11.attr: New file. * testsuite/ld-arm/attr-merge-12a.s: New file. * testsuite/ld-arm/attr-merge-12b.s: New file. * testsuite/ld-arm/attr-merge-12.attr: New file.
2017-06-24Automatic date update in version.inGDB Administrator1-1/+1
2017-06-23[AArch64] Fix typo in comments on relocation nameJiong Wang3-4/+10
BFD_RELOC_AARCH64_ADR_GOTPAGE should be BFD_RELOC_AARCH64_ADR_GOT_PAGE. bfd/ * reloc.c (BFD_RELOC_AARCH64_ADR_GOTPAGE): Rename to BFD_RELOC_AARCH64_ADR_GOT_PAGE * bfd-in2.h: Regenerated.
2017-06-23S/390: Add support for pgste markerAndreas Krebbel2-0/+99
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For binaries marked with that segment the kernel will allocate 4k page tables. The only user so far will be qemu. ld/ChangeLog: 2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * Makefile.in: Add s390.em as build dependency. * emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em. * emultempl/s390.em: New file. * gen-doc.texi: Add documentation for --s390-pgste option. * ld.texinfo: Likewise. include/ChangeLog: 2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * elf/s390.h (PT_S390_PGSTE): Define macro. binutils/ChangeLog: 2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * readelf.c (get_s390_segment_type): Add support for the new segment type PT_S390_PGSTE. (get_segment_type): Call get_s390_segment_type. elfcpp/ChangeLog: 2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * elfcpp.h (enum PT): Add PT_S390_PGSTE to enum. bfd/ChangeLog: 2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * elf-s390.h: New file. * elf64-s390.c (struct elf_s390_link_hash_table): Add params field. (elf_s390_additional_program_headers): New function. (elf_s390_modify_segment_map): New function. (bfd_elf_s390_set_options): New function. (elf_backend_additional_program_headers) (elf_backend_modify_segment_map): Add macro definitions.
2017-06-23Automatic date update in version.inGDB Administrator1-1/+1
2017-06-22x86-64: Move the error_alignment label forwardH.J. Lu2-7/+14
Move the error_alignment label forward to avoid clang warning on if (!bfd_set_section_alignment (ebfd, sec, 2)) goto error_alignment; htab = elf_x86_64_hash_table (info); error_alignment: info->callbacks->einfo (_("%F%A: failed to align section\n"), sec); "%F" causes a fatal linker error and immediate exit. sec = htab->elf.sgotplt; Also fix alignment on program property note section. * elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Move the error_alignment label forward. Properly align program property note section.
2017-06-22x86: Resolve local undefined weak symbol to 0H.J. Lu3-10/+20
Local undefined weak symbol should always be resolved to 0. * elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Resolve local undefined weak symbol to 0. * elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Likewise.
2017-06-222017-06-22 Eric Christopher <echristo@gmail.com>Eric Christopher2-1/+6
* elf32-arm.c (elf32_arm_final_link_relocate): Use labs rather than abs to fix a truncation warning.
2017-06-22x86: Support Intel Shadow Stack with SHSTK propertyH.J. Lu3-8/+39
To support Intel Shadow Stack (SHSTK) in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_SHSTK (1U << 1) is added to GNU program properties to indicate that all executable sections are compatible with SHSTK where return address popped from shadow stack always matches return address popped from normal stack. GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on output only if it is set on all relocatable inputs. bfd/ * elf32-i386.c (elf_i386_merge_gnu_properties): If info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK. (elf_i386_link_setup_gnu_properties): If info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. * elf64-x86-64.c (elf_x86_64_merge_gnu_properties): If info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK. (elf_x86_64_link_setup_gnu_properties): If info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. binutils/ * readelf.c (decode_x86_feature): Decode GNU_PROPERTY_X86_FEATURE_1_SHSTK. * testsuite/binutils-all/i386/shstk.d: New file. * testsuite/binutils-all/i386/shstk.s: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. * testsuite/binutils-all/x86-64/shstk.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add shstk. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_SHSTK): New. ld/ * NEWS: Mention -z shstk and GNU_PROPERTY_X86_FEATURE_1_SHSTK. * emulparams/cet.sh (PARSE_AND_LIST_OPTIONS_CET): Add "-z shstk". (PARSE_AND_LIST_ARGS_CASE_Z_CET): Support "-z shstk". * ld.texinfo: Document -z shstk. * testsuite/ld-i386/i386.exp: Run SHSTK tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/property-x86-shstk.s: New file. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk.s: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.
2017-06-22x86: Support Intel IBT with IBT property and IBT-enable PLTH.J. Lu3-75/+989
To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
2017-06-22Fix address violation parsing a corrupt SOM binary.Nick Clifton2-2/+14
PR binutils/21649 * som.c (setup_sections): NUL terminate the space_strings buffer. Check that the space.name field does not index beyond the end of the space_strings buffer.
2017-06-22Automatic date update in version.inGDB Administrator1-1/+1
2017-06-21Fix addrss violation when processing a corrupt SH COFF binary.Nick Clifton2-1/+8
PR binutils/21646 * coff-sh.c (sh_reloc): Check for an out of range reloc.
2017-06-21Fix address violation parsing a corrupt Alpha VMS binary file.Nick Clifton4-18/+63
PR binutils/21639 * vms-misc.c (_bfd_vms_save_sized_string): Use unsigned int as type of the size parameter. (_bfd_vms_save_counted_string): Add second parameter - the maximum length of the counted string. * vms.h (_bfd_vms_save_sized_string): Update prototype. (_bfd_vms_save_counted_string): Likewise. * vms-alpha.c (_bfd_vms_slurp_eisd): Update calls to _bfd_vms_save_counted_string. (_bfd_vms_slurp_ehdr): Likewise. (_bfd_vms_slurp_egsd): Likewise. (Parse_module): Likewise.
2017-06-21PowerPC64 localentry:0 plt callsAlan Modra2-15/+25
These don't need a following nop. Also, a localentry:0 plt call marked with an R_PPC64_TOCSAVE reloc should ignore the tocsave. There's no need to save r2 in the prologue for such calls. * elf64-ppc.c (ppc64_elf_size_stubs): Test for localentry:0 plt calls before tocsave calls. (ppc64_elf_relocate_section): Allow localentry:0 plt calls without following nop.
2017-06-21Fix seg-fault in the BFD parsing a corrupt input binary.Nick Clifton3-0/+10
PR binutils/21645 * reloc.c (bfd_generic_get_relocated_section_contents): Fail if bfd_get_full_section_contents returns no contents.
2017-06-21Fix potential address violation parsing a corrupt Alpha VMS file.Nick Clifton2-0/+16
PR binutils/21638 * vms-alpha.c (_bfd_vms_slurp_egsd): Check for an undersized record.
2017-06-21Fix address violation parsing a corrupt IEEE Alpha binary.Nick Clifton2-4/+32
PR binutils/21637 * vms-alpha.c (_bfd_vms_slurp_egsd): Check for an empty section list. (image_set_ptr): Likewise. (alpha_vms_fix_sec_rel): Likewise. (alpha_vms_slurp_relocs): Likewise.
generated by cgit v1.1 at 2024-12-11 09:26:07 +0000