| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* reloc.c (bfd_perform_relocation, bfd_install_relocation): Remove
i960-coff target hack.
|
|
Old COFF (and AOUT) targets have unusual relocation addends.
* coffcode.h (<Reading relocations>): Describe COFF addends.
|
|
|
|
|
|
|
|
|
|
|
|
Since commit 9833b7757d24, "PR28824, relro security issues",
ELF_MAXPAGESIZE matters much more, with regards to layout of
the linked file. That commit fixed an actual bug, but also
exposes a problem for targets were that value is too high.
For example, for ARM(32, a.k.a. "Aarch32") specifically
bfd_arch_arm, it's set to 64 KiB, making all Linux(/GNU)
targets pay an extra amount of up to 60 KiB of bloat in
DSO:s and executables. This matters when there are many
such files, and where storage is expensive.
It's *mostly* bloat when using a Linux kernel, as ARM(32) is
a good example of an target where ELF_MAXPAGESIZE is set to
an extreme value for an obscure corner-case. The ARM
(32-bit) kernel has 4 KiB pages, has had that value forever,
and can't be configured to any other value. The use-case is
IIUC "Aarch32" emulation on an "Aarch64" (arm64) kernel, but
not just that, but a setup where the Linux page-size is
configured to something other than the *default* 4 KiB. Not
sure there actually any such systems in use, again with
both Aarch32 compatibility support and a non-4KiB pagesize,
with all the warnings in the kernel config and requiring the
"EXPERT" level set on.
So, let's do like x86-64 in a2267dbfc9e1 "x86-64: Use only
one default max-page-size" and set ELF_MAXPAGESIZE to 4096.
bfd:
* elf32-arm.c (ELF_MAXPAGESIZE): Always set to 0x1000.
|
|
We already use C99's __func__ in places, use it more generally. This
patch doesn't change uses in the testsuite. I've also left one in
gold.h that is protected by GCC_VERSION < 4003. If any of the
remaining uses bothers anyone I invite patches.
bfd/
* bfd-in.h: Replace __FUNCTION__ with __func__.
* elf32-bfin.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfxx-sparc.c: Likewise.
* bfd-in2.h: Regenerate.
gas/
* config/tc-cris.c: Replace __FUNCTION__ with __func__.
* config/tc-m68hc11.c: Likewise.
* config/tc-msp430.c: Likewise.
gold/
* dwp.h: Replace __FUNCTION__ with __func__.
* gold.h: Likewise, except for use inside GCC_VERSION < 4003.
ld/
* emultempl/pe.em: Replace __FUNCTION__ with __func__.
* emultempl/pep.em: Likewise.
* pe-dll.c: Likewise.
|
|
|
|
corrupt DWARF file.
PR 29988
* dwarf2.c (read_indexed_address): Fix check for an out of range
offset.
|
|
|
|
This adds a mingw target for aarch64, including windres and dlltool.
Note that the old value of jmp_aarch64_bytes was wrong, and this does
the same thing as MSVC does.
|
|
Adds the .secrel32 pseudo-directive and its corresponding relocation.
|
|
This adds the remaining pe-aarch64 relocations, and gets them working.
It also brings in the constant directives from ELF, as otherwise .word
would be 2 rather than 4 bytes, and .xword and .dword wouldn't be
defined.
|
|
This patch series finishes off the work by Jedidiah Thompson, and adds
support for creating aarch64 PE images.
This should be essentially complete: I've used this to create a "hello
world" Windows program in asm, and (with GCC patches) a UEFI program in
C. I think the only things missing are the .secidx relocation, which is
needed for PDBs, and the SEH pseudos used for C++ exceptions.
This first patch fixes the size of RELSZ; I'm not sure why it was 14 in
the first place. This is the size of the "Base Relocation Block" in
https://learn.microsoft.com/en-us/windows/win32/debug/pe-format, and
AFAIK should be 10 for everything.
|
|
For local exec TLS relocations of the form foo@NTPOFF+x the addend was
ignored.
bfd/ChangeLog:
* elf32-s390.c (elf_s390_relocate_section): Honor addend for
R_390_TLS_LE32.
* elf64-s390.c (elf_s390_relocate_section): Honor addend for
R_390_TLS_LE64.
ld/ChangeLog:
* testsuite/ld-s390/reloctlsle-1.d: New test.
* testsuite/ld-s390/reloctlsle-1.s: New test.
|
|
|
|
Commit b1c95bc4dd73 resulted in
...bfd.texi:246: @include: could not find init.texi
which went unnoticed due to not building in a clean directory.
This fixes the problem by moving bfd_init earlier, giving it a
doc node, and stitching the nodes back together.
* bfd.c (bfd_init): Move earlier. Give it a doc inode.
Adjust other inodes to suit.
* doc/bfd.texi: Don't include init.texi. Adjust nodes to suit.
|
|
|
|
This fixes a memory leak in the vanishingly rare cases (found by
fuzzers of course) when something goes wrong in the save_section_vma,
htab_create_alloc or alloc_trie_leaf calls before *pinfo is written.
If *pinfo is not written, _bfd_dwarf2_cleanup_debug_info won't be able
to free that memory.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Save stash pointer
on setting up stash.
|
|
Also fix a memory leak, and make some style changes. I tend to read
(sizeof * x) as a multiplication of two variables, which I would not
do if binutils followed the gcc coding conventions consistently (see
https://gcc.gnu.org/codingconventions.html#Expressions). (sizeof *x)
looks a lot better to me, or even (sizeof (*x)) which I've used here.
* peXXigen.c (get_contents_sanity_check): New function.
(pe_print_idata): Use it here..
(pe_print_edata): ..and here. Free data on error return.
(rsrc_parse_entry): Check entry size read from file.
(rsrc_parse_entries): Style fixes.
(rsrc_process_section): Use bfd_malloc_and_get_section.
(_bfd_XXi_final_link_postscript): Likewise.
|
|
Similar to commit c799eddb3512, but for mips-ecoff. mips-ecoff is
marked obsolete, but we still allow reading of these object files in
a number of mips targets.
* coff-mips.c (struct mips_hi, mips_refhi_list): Delete.
(mips_refhi_reloc, mips_reflo_reloc): Access mips_refhi_list
in ecoff_data.
* ecoff.c (_bfd_ecoff_close_and_cleanup): New function.
* libecoff.h (struct mips_hi): Moved from coff-mips.c.
(struct ecoff_tdata): Add mips_refhi_list.
(_bfd_ecoff_close_and_cleanup): Declare.
|
|
init.c contains just one function that doesn't do much. Move it to
bfd.c and give it something to do, initialising static state. So far
the only initialisation is for bfd.c static variables.
The idea behind reinitialising state is to see whether some set of
flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways
that can't occur in reality, feeding multiple testcases into the
internals of binutils. So one testcase may affect the result of the
next testcase.
* init.c: Delete file. Move bfd_init to..
* bfd.c (bfd_init): ..here. Init static variables.
* Makefile.am (BFD32_LIBS): Remove init.lo.
(BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c.
* doc/local.mk: Remove mention of init.texi and init.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
|
|
In order to get the ifunc relocs properly sorted the correct class
needs to be returned. The code mimics what has been done for AArch64.
Fixes:
FAIL: Run pr18841 with libpr18841b.so
FAIL: Run pr18841 with libpr18841c.so
FAIL: Run pr18841 with libpr18841bn.so (-z now)
FAIL: Run pr18841 with libpr18841cn.so (-z now)
bfd/
PR ld/18841
* elf32-arm.c (elf32_arm_reloc_type_class): Return
reloc_class_ifunc for ifunc symbols.
ld/testsuite/
* ld-arm/ifunc-12.rd: Update relocations order.
* ld-arm/ifunc-3.rd: Likewise.
* ld-arm/ifunc-4.rd: Likewise.
|
|
|
|
|
|
|
|
|
|
* aoutx.h (aout_bfd_free_cached_info): Free line_buf.
|
|
Make it a bool, use obj_pe accessor everywhere.
|
|
The bfd_coff_backend_data struct should be read-only, the only thing
preventing this is that objcopy writes to one of the fields,
_bfd_coff_long_section_names. This patch creates a copy of the field
in bfd coff_obj_tdata, which makes more sense anyway. When enabling
long section names the intent is to do so for a particular bfd, not
for all bfds that might happen to be using the target xvec.
bfd/
* coffcode.h: Update coff long section name comment.
(bfd_coff_set_long_section_names_allowed): Use macro accessor
to set flag.
(bfd_coff_set_long_section_names_disallowed): Tidy.
(coff_backend_info): Return a const pointer.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table),
(bigobj_swap_table): Make const.
(bfd_coff_long_section_names): Use tdata copy.
(coff_mkobject): Set long_section_names from coff_backend_info.
* coff-go32.c (_bfd_go32_mkobject): Likewise.
* peicode.h (pe_mkobject): Likewise.
* coff-sh.c (bfd_coff_small_swap_table): Make const.
* libcoff-in.h (struct coff_tdata): Add long_section_names,
reorder fields.
* libcoff.h: Regenerate.
binutils/
* objcopy.c (set_long_section_mode): Move earlier in file.
(copy_object): Call set_long_section_mode here, after setting
output format.
(copy_file): Don't call set_long_section_mode.
|
|
|
|
PDP11 is a 16-bit processor with 16-bit logical addresses. Therefore
wrapping should be allowed on the 16-bit relocs, and may as well be
allowed for the 32-bit reloc too.
PR 29963
* pdp11.c (howto_table_pdp11): Use complain_overflow_dont.
|
|
|
|
I386_PCREL_TYPE_P and X86_64_PCREL_TYPE_P are defined twice. Remove
the duplications.
* elfxx-x86.h (I386_PCREL_TYPE_P): Remove duplication.
(X86_64_PCREL_TYPE_P): Likewise.
|
|
* vms-alpha.c (parse_module): Ignore DST__K_SRC_SETFILE data
if out of range.
|
|
Another case of fuzzers finding the section size sanity checks are
avoided with SHT_NOBITS sections.
* dwarf2.c (read_section): Check that the DWARF section being
read has contents.
|
|
|
|
device driver.
PR 29947
* bfdio.c (_bfd_real_fopen): Do not add a prefix to the Windows'
nul device filename.
|
|
|
|
|
|
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
|
|
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
|
|
|
|
|
|
|
|
|
