Age | Commit message (Collapse) | Author | Files | Lines |
|
This fix is an adaption of the x86-64 PR ld/21402 fix to AArch64.
After the generic code deciding one symbol is not dynamic, AArch64 backend
only overrides the decision on undefined weak symbols.
bfd/
PR ld/21402
* elfnn-aarch64.c (elfNN_aarch64_allocate_dynrelocs): Only make
undefined weak symbols into dynamic.
(elfNN_aarch64_final_link_relocate): Generate runtime RELATIVE
relocation for non-dynamic symbols.
(elfNN_aarch64_finish_dynamic_symbol): Add sanity check.
|
|
There are quite a few duplicated code supporting several GP based
relocation types. They are:
BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
These relocation types are supposed to be used for large memory model PIC/pic
mode under which we will have an initialized GP register points to the base of
GOT table, then these relocations are supposed to put the distance between GOT
entry and GOT table base address into the related instructions.
So, the parameters required to calculate the relocation should be the same as
BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15 etc, all of them are require the GOT entry
address and GOT table base address to perform the relocation.
This patch has removed those duplicated code when handling above listed
relocation types, grouped them with others as relocation types that are
require GOT table base address during performing relocation, reused the
existed GOT handling code.
The relocation calculation for these types before and after this patch should be
identical.
bfd/
* elfnn-aarch64.c (aarch64_relocation_aginst_gp_p): New function.
(elfNN_aarch64_final_link_relocate): Delete duplicated code for
BFD_RELOC_AARCH64_LD64_GOTOFF_LO15, BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC,
BFD_RELOC_AARCH64_MOVW_GOTOFF_G1.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Optimize the
support for them.
|
|
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
|
|
|
|
Since it is impossible to read beyond the end of normal files, we only
need to check archive element size in _bfd_generic_get_section_contents
* libbfd.c (_bfd_generic_get_section_contents): Don't call
bfd_get_file_size. Check archive element size.
(_bfd_generic_get_section_contents_in_window): Likewise.
|
|
bfd_get_size and bfd_get_file_size should return the unsigned file
size. Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.
bfd/
* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.
binutils/
* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.
|
|
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
|
|
|
|
* tekhex.c (pass_over): Revert accidental conversion of a local
array to a static array.
|
|
Fix incorrect adjustment of diff relocs when relaxing, and thus the
resulting source line to address mismatch.
Fix two issues when adjusting diff relocs to account for
deleted bytes.
1. Don't adjust the difference if the end address is the shrinked
insn's address i.e. use < instead of <=. The relaxation code deletes
count bytes from or after shrinked_insn_address, so the difference
between start_address and end_address should remain unchanged in this
case.
2. Adjust the reloc addend if the difference is to be adjusted and
symval + reloc addend is past the shrinked insn address. This is
because for a typical sym1 - sym2 diff reloc, sym1 is .text +
irel->r_addend, and the addend should be reduced to account for the
shrinked insn.
For example, assume the reloc value is .text + 0x8 with .text = 0, the
diff value in the object file = 0x4, and shrinked_insn_address = 0x4
with count = 0x2. Then the existing code writes 0x2 into the object
file to account for the deleted bytes, as shrinked_insn_address lies
between 0x8 and 0x8 - 0x4 = 0x4, but leaves the addend as is. The next
time the reloc is looked at, the code sees if a shrinked_insn_address
lies between 0x8 and 0x8 - 0x2 = 0x6, instead of 0x6 and 0x4. If there
happens to be one, then the diff value in the object file ends up
getting reduced again.
bfd/
2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/13402
* elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Adjust
reloc addend if necessary. Adjust diff only if
shrinked_insn_address < end_address.
ld/
2017-06-27 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/13402
* testsuite/ld-avr/pr13402.d: New test.
* testsuite/ld-avr/pr13402.s: New test.
|
|
PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Warning fix.
(_bfd_generic_get_section_contents_in_window): Likewise.
|
|
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
|
|
PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Delete abort.
Use unsigned file pointer type, and remove cast.
* libbfd.c (_bfd_generic_get_section_contents_in_window): Likewise.
Add "count", not "sz".
|
|
|
|
Ref: https://sourceware.org/ml/binutils/2017-06/msg00343.html
bfd/ChangeLog:
2017-06-26 Pedro Alves <palves@redhat.com>
PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Add "count", not
"sz".
|
|
PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents_in_window): Add
a missing line.
|
|
Make BFD agree with GAS and mark the LSI MiniRISC CW4010 processor core
(for an odd reason referred to as LSI R4010 across our code base) as a
MIPS II processor in BFD as well, fixing a bug that has been there since
forever and addressing linker warnings like:
$ as -m4010 empty.s -o 4010.o
$ ld -r 4010.o -o 4010-r.o
ld: 4010.o: warning: Inconsistent ISA between e_flags and .MIPS.abiflags
$
due to the ISA level being recorded as MIPS III in ELF file header's
`e_flags' vs MIPS II in the MIPS ABI Flags section:
$ readelf -Ah 4010.o
ELF Header:
Magic: 7f 45 4c 46 01 02 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: REL (Relocatable file)
Machine: MIPS R3000
Version: 0x1
Entry point address: 0x0
Start of program headers: 0 (bytes into file)
Start of section headers: 348 (bytes into file)
Flags: 0x20821000, 4010, o32, mips3
Size of this header: 52 (bytes)
Size of program headers: 0 (bytes)
Number of program headers: 0
Size of section headers: 40 (bytes)
Number of section headers: 11
Section header string table index: 10
Attribute Section: gnu
File Attributes
Tag_GNU_MIPS_ABI_FP: Hard float (double precision)
MIPS ABI Flags Version: 0
ISA: MIPS2
GPR size: 32
CPR1 size: 32
CPR2 size: 0
FP ABI: Hard float (double precision)
ISA Extension: LSI R4010
ASEs:
None
FLAGS 1: 00000000
FLAGS 2: 00000000
$
Available documentation[1][2] clearly indicates the LSI CW4010 processor
is only backwards compatible with the MIPS R4000 processor as far as the
latter's 32-bit instructions are concerned and consequently can only be
considered a MIPS II ISA implementation (with vendor extensions).
This fixes an LD testsuite failure:
FAIL: MIPS incompatible objects: "-march=r4010 -32" "-march=r4650 -32"
triggered for the `mips-sgi-irix5' and `mips-sgi-irix6' targets.
References:
[1] Paul Cobb, Bob Caulk, Joe Cesana, "The MiniRISC CW4010: A
Superscalar MIPS Processor ASIC Core", LSI Logic, July 1995,
presented at Hot Chips VII, Stanford University, Stanford,
California, August 1995
[2] "MiniRISC MR4010 Superscalar Microprocessor Reference Device", LSI
Logic, November 1996, Doc. No. DB09-000028-00, Order No. C15017
bfd/
* cpu-mips.c (arch_info_struct): Mark the 4010 32-bit.
* elfxx-mips.c (mips_set_isa_flags) <bfd_mach_mips4010>: Set
E_MIPS_ARCH_2 rather than E_MIPS_ARCH_3 in `e_flags'.
(mips_mach_extensions): Mark `bfd_mach_mips4010' as extending
`bfd_mach_mips6000' rather than `bfd_mach_mips4000'.
ld/
* testsuite/ld-mips-elf/lsi-4010-isa.d: New test.
* ld/testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
Don't check the section size in bfd_get_full_section_contents since
the size of a decompressed section may be larger than the file size.
Instead, check file size in _bfd_generic_get_section_contents.
PR binutils/21665
* compress.c (bfd_get_full_section_contents): Don't check the
file size here.
* libbfd.c (_bfd_generic_get_section_contents): Check for and
reject a section whoes size + offset is greater than the size
of the entire file.
(_bfd_generic_get_section_contents_in_window): Likewise.
|
|
Correct .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIX targets,
complementing commit dc74becf498f ("ld: Add tests for -Ur") and commit
da614360f520 ("ld: Add tests for .startof.SECNAME/.sizeof.SECNAME") with
subsequent updates, and in reference to commit cbd0eecf261c ("Always
define referenced __start_SECNAME/__stop_SECNAME") and commit
7dba9362c172 ("Rewrite __start and __stop symbol handling").
These targets set the STT_OBJECT type for non-function symbol
references, according to `elf_frob_symbol' code in gas/config/obj-elf.c:
/* The Irix 5 and 6 assemblers set the type of any common symbol and
any undefined non-function symbol to STT_OBJECT. We try to be
compatible, since newer Irix 5 and 6 linkers care. However, we
only set undefined symbols to be STT_OBJECT if we are on Irix,
because that is the only time gcc will generate the necessary
.global directives to mark functions. */
if (S_IS_COMMON (symp))
symbol_get_bfdsym (symp)->flags |= BSF_OBJECT;
if (strstr (TARGET_OS, "irix") != NULL
&& ! S_IS_DEFINED (symp)
&& (symbol_get_bfdsym (symp)->flags & BSF_FUNCTION) == 0)
symbol_get_bfdsym (symp)->flags |= BSF_OBJECT;
and consequently entries in the symbol table listing from `readelf'
produced with these tests do not match the NOTYPE pattern expected,
causing test suite failures:
FAIL: ld-elf/sizeofa
FAIL: ld-elf/sizeofc
FAIL: ld-elf/startofa
FAIL: ld-elf/startofc
specifically with the `mips-sgi-irix5' and `mips-sgi-irix6' targets.
Given that it does not matter for the feature covered by these tests
whether the type of the symbols produced is STT_NOTYPE or STT_OBJECT
adjust the problematic cases to accept either type, removing the
failures observed.
ld/
* testsuite/ld-elf/sizeofa.d: Also accept the OBJECT type for
the symbols examined.
* testsuite/ld-elf/sizeofc.d: Likewise.
* testsuite/ld-elf/startofa.d: Likewise.
* testsuite/ld-elf/startofc.d: Likewise.
|
|
PR binutils/21670
* tekhex.c (getvalue): Check for the source pointer exceeding the
end pointer before the first byte is read.
|
|
PR binutils/21665
bfd * opncls.c (get_build_id): Check that the section is beig enough
to contain the whole note.
* compress.c (bfd_get_full_section_contents): Check for and reject
a section whoes size is greater than the size of the entire file.
* elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not
contain a notes section.
binutils* objdump.c (disassemble_section): Skip any section that is bigger
than the entire file.
|
|
|
|
The recent pgste patch caused several testcases to fail with a
segfault. Fixed with this patch by adding NULL pointer checks.
regression-tested on s390x.
bfd/ChangeLog:
2017-06-26 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf64-s390.c (elf_s390_additional_program_headers): Add NULL
pointer checks.
(elf_s390_modify_segment_map): Likewise.
(bfd_elf_s390_set_options): Lisewise.
|
|
|
|
All sections on a --just-syms bfd are discarded from the output, so
attaching linker created sections to such a bfd results in errors.
In other cases, like the .note.GNU-stack check, it's wrong to have a
--just-syms object potentially affect the output.
bfd/
* elflink.c (_bfd_elf_link_create_dynstrtab): Don't make dynobj
a --just-syms bfd.
(_bfd_elf_size_group_sections): Skip --just-syms bfds.
(bfd_elf_size_dynamic_sections): Ignore .note.GNU-stack and
.preinit_array on --just-syms bfds.
(_bfd_elf_gc_mark_extra_sections): Skip --just-syms bfds.
(elf_gc_sweep, bfd_elf_parse_eh_frame_entries): Likewise.
(bfd_elf_gc_sections, bfd_elf_discard_info): Likewise.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Skip
--just-syms bfds when looking for a place to attach .note.gnu.build-id
and .eh_frame_hdr sections. Delete dead code.
|
|
The out-of-bounds access is reproducible on 'ia64-strip' command
(see sample from https://bugs.gentoo.org/show_bug.cgi?id=622500)
The output file contains less section than original one.
This tricks 'hint' access to go out-of-bounds:
* elf.c (find_link): Bounds check "hint".
|
|
|
|
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in the linker.
=== Patch description ===
This patch is composed of 3 changes:
1) The main change is the addition of the logic for merging a file whose
Tag_CPU_arch build attribute is 15 (ARMv8-R). Namely, all pre-ARMv8 are
merged into ARMv8-R as well as ARMv8-R itself. ARMv8-A (14) merges into
ARMv8-A. ARMv8-M Baseline (16) and Mainline (17) are not allowed to
merge merge with ARMv8-R. Note that merging only occurs if the two
profiles are identical or one is S (Application or Realtime) and the
other is R.
2) using_thumb_only, using_thumb2_bl, using_thumb2 and arch_has_arm_nop
are updated according to capabilities of ARMv8-R and their BFD_ASSERT
updated to reflect that the logic is valid for ARMv8-R.
3) 2 build attribute merging tests are added to test the first change.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (using_thumb_only): Update list of architectures in
BFD_ASSERT for which the logic is valid.
(using_thumb2_bl): Likewise.
(using_thumb2): Likewise and return true for ARMv8-R.
(arch_has_arm_nop): Likewise.
(tag_cpu_arch_combine): New v8r table for ARMv8-R Tag_CPU_arch
merging logic. Update commentis for value 15 of v8m_baseline,
v8m_mainline and v4t_plus_v6_m arrays. Use v8r array to decide
merging of value 15 of Tag_CPU_arch.
ld/
* testsuite/ld-arm/arm-elf.exp (EABI attribute merging 11): New test.
(EABI attribute merging 12): Likewise.
* testsuite/ld-arm/attr-merge-11a.s: New file.
* testsuite/ld-arm/attr-merge-11b.s: New file.
* testsuite/ld-arm/attr-merge-11.attr: New file.
* testsuite/ld-arm/attr-merge-12a.s: New file.
* testsuite/ld-arm/attr-merge-12b.s: New file.
* testsuite/ld-arm/attr-merge-12.attr: New file.
|
|
|
|
BFD_RELOC_AARCH64_ADR_GOTPAGE should be BFD_RELOC_AARCH64_ADR_GOT_PAGE.
bfd/
* reloc.c (BFD_RELOC_AARCH64_ADR_GOTPAGE): Rename to
BFD_RELOC_AARCH64_ADR_GOT_PAGE
* bfd-in2.h: Regenerated.
|
|
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For
binaries marked with that segment the kernel will allocate 4k page
tables. The only user so far will be qemu.
ld/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.
include/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf/s390.h (PT_S390_PGSTE): Define macro.
binutils/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.
elfcpp/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.
bfd/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.
|
|
|
|
Move the error_alignment label forward to avoid clang warning on
if (!bfd_set_section_alignment (ebfd, sec, 2))
goto error_alignment;
htab = elf_x86_64_hash_table (info);
error_alignment:
info->callbacks->einfo (_("%F%A: failed to align section\n"), sec);
"%F" causes a fatal linker error and
immediate exit.
sec = htab->elf.sgotplt;
Also fix alignment on program property note section.
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Move
the error_alignment label forward. Properly align program
property note section.
|
|
Local undefined weak symbol should always be resolved to 0.
* elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Resolve
local undefined weak symbol to 0.
* elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Likewise.
|
|
* elf32-arm.c (elf32_arm_final_link_relocate): Use labs rather than
abs to fix a truncation warning.
|
|
To support Intel Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_SHSTK (1U << 1)
is added to GNU program properties to indicate that all executable sections
are compatible with SHSTK where return address popped from shadow stack
always matches return address popped from normal stack.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on output only if it is set on all
relocatable inputs.
bfd/
* elf32-i386.c (elf_i386_merge_gnu_properties): If info->shstk
is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_i386_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
* elf64-x86-64.c (elf_x86_64_merge_gnu_properties): If
info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_x86_64_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
binutils/
* readelf.c (decode_x86_feature): Decode
GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* testsuite/binutils-all/i386/shstk.d: New file.
* testsuite/binutils-all/i386/shstk.s: Likewise.
* testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add shstk.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_SHSTK): New.
ld/
* NEWS: Mention -z shstk and GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* emulparams/cet.sh (PARSE_AND_LIST_OPTIONS_CET): Add "-z shstk".
(PARSE_AND_LIST_ARGS_CASE_Z_CET): Support "-z shstk".
* ld.texinfo: Document -z shstk.
* testsuite/ld-i386/i386.exp: Run SHSTK tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-shstk.s: New file.
* testsuite/ld-i386/property-x86-shstk1a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk1b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk2.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk4.d: Likewise.
* testsuite/ld-i386/property-x86-shstk5.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk.s: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.
|
|
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
|
|
PR binutils/21649
* som.c (setup_sections): NUL terminate the space_strings buffer.
Check that the space.name field does not index beyond the end of
the space_strings buffer.
|
|
|
|
PR binutils/21646
* coff-sh.c (sh_reloc): Check for an out of range reloc.
|
|
PR binutils/21639
* vms-misc.c (_bfd_vms_save_sized_string): Use unsigned int as
type of the size parameter.
(_bfd_vms_save_counted_string): Add second parameter - the maximum
length of the counted string.
* vms.h (_bfd_vms_save_sized_string): Update prototype.
(_bfd_vms_save_counted_string): Likewise.
* vms-alpha.c (_bfd_vms_slurp_eisd): Update calls to
_bfd_vms_save_counted_string.
(_bfd_vms_slurp_ehdr): Likewise.
(_bfd_vms_slurp_egsd): Likewise.
(Parse_module): Likewise.
|
|
These don't need a following nop. Also, a localentry:0 plt call
marked with an R_PPC64_TOCSAVE reloc should ignore the tocsave.
There's no need to save r2 in the prologue for such calls.
* elf64-ppc.c (ppc64_elf_size_stubs): Test for localentry:0 plt
calls before tocsave calls.
(ppc64_elf_relocate_section): Allow localentry:0 plt calls without
following nop.
|
|
PR binutils/21645
* reloc.c (bfd_generic_get_relocated_section_contents): Fail if
bfd_get_full_section_contents returns no contents.
|
|
PR binutils/21638
* vms-alpha.c (_bfd_vms_slurp_egsd): Check for an undersized
record.
|
|
PR binutils/21637
* vms-alpha.c (_bfd_vms_slurp_egsd): Check for an empty section
list.
(image_set_ptr): Likewise.
(alpha_vms_fix_sec_rel): Likewise.
(alpha_vms_slurp_relocs): Likewise.
|
|
PR binutils/21633
* ieee.c (ieee_slurp_sections): Check for a NULL return from
read_id.
(ieee_archive_p): Likewise.
(ieee_object_p): Likewise.
|
|
PR binutils/21640
* elf.c (setup_group): Zero the group section pointer list after
allocation so that loops can be caught. Check for NULL pointers
when processing a group list.
|
|
|
|
Since the BFD section count may not be cleared for shared objects during
linking, we should check the DYNAMIC bit for input shared objects.
bfd/
PR ld/21626
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Check
the DYNAMIC bit instead of bfd_count_sections.
ld/
PR ld/21626
* testsuite/ld-i386/i386.exp: Run ld/21626 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
|
|
|