aboutsummaryrefslogtreecommitdiff
path: root/bfd/targets.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-2/+4
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-09-24The problem with warning in elf_object_pAlan Modra1-1/+28
elfcode.h can emit three warnings in elf_object_p for various things, "section extending past end of file", "corrupt string table index", and "program header with invalid alignment". The problem with doing this is that the warning can be emitted for multiple possible targets as each one is tried. I was looking at a fuzzer testcase that had an object file with 6144 program headers, 5316 of which had invalid alignment. It would be bad enough to get 5316 messages all the same, but this object was contained in an archive and resulted in 4975776 repeats. Some trimming can be done by not warning if the bfd is already marked read_only, as is done for the "section extending past end of file" warning, but that still results in an unacceptable number of warnings for object files in archives. Besides that, it is just wrong to warn about a problem detected by a target elf_object_p other than the one that actually matches. At some point we might have more target specific warnings. So what to do? One obvious solution is to remove the warnings. Another is to poke any warning strings into the target xvec, emitting them if that xvec is the final one chosen. This also has the benefit of solving the archive problem. A warning when recursing into _bfd_check_format for the first element of the archive (to find the correct target for the archive) will still be on the xvec at the point that target is chosen for the archive. However, target xvecs are read-only. Thus the need for per_xvec_warn to logically extend bfd_target with a writable field. I've made per_xvec_warn one larger than bfd_target_vector to provide one place for user code that makes private copies of target xvecs. * elfcode.h (elf_swap_shdr_in, elf_object_p): Stash potential warnings in _bfd_per_xvec_warn location. * format.c (clear_warnmsg): New function. (bfd_check_format_matches): Call clear_warnmsg before trying a new xvec. Print warnings for the successful non-archive match. * targets.c: Include libiberty.h. (_bfd_target_vector_entries): Use ARRAY_SIZE. (per_xvec_warn): New. (_bfd_per_xvec_warn): New function. * Makefile.am (LIBBFD_H_FILES): Add targets.c. * Makefile.in: Regenerate. * libbfd.h: Regenerate.
2022-09-13Add pdb archive formatMark Harmstone1-0/+3
Resubmitted with changes in https://sourceware.org/pipermail/binutils/2022-September/122791.html made.
2022-09-06bfd: Add bfd_find_nearest_line_with_altAaron Merey1-0/+6
bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with the addition of a parameter for specifying the filename of a supplementary debug file such as one referenced by .gnu_debugaltlink or .debug_sup. This patch focuses on implementing bfd_find_nearest_line_with_alt support for ELF/DWARF2 .gnu_debugaltlink. For other targets this function simply sets the invalid_operation bfd_error.
2022-08-10bfd: Add support for LoongArch64 EFI (efi-*-loongarch64).Youling Tang1-0/+2
This adds support for efi-loongarch64 by virtue of adding a new PEI target pei-loongarch64. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based loongarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be "RVA truncated" error when using objcopy on loongarch64. With these changes the resulting file is recognized as an efi image. Any magic number is based on the Microsoft PE specification [1]. The test results are as follows: $ make check-binutils RUNTESTFLAGS='loongarch64.exp' PASS: Check if efi app format is recognized $ objdump -h -f tmpdir/loongarch64copy.o tmpdir/loongarch64copy.o: file format pei-loongarch64 architecture: Loongarch64, flags 0x00000132: EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED start address 0x0000000000000000 Sections: Idx Name Size VMA LMA File off Algn 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd: * .gitignore (pe-loongarch64igen.c): New. * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c, pe-loongarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64. * coff-loongarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common, _bfd_peLoongArch64_bfd_copy_private_section_data, _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out, _bfd_peLoongArch64_print_private_bfd_data_common, _bfd_peLoongArch64i_final_link_postscript, _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in, _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in, _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in, _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out, _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out, _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out, _bfd_peLoongArch64i_write_codeview_record, _bfd_peLoongArch64i_slurp_codeview_record, _bfd_peLoongArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peLoongArch64, * pei-loongarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peLoongArch64. (jtab): Add dummy entry that traps. * targets.c (loongarch64_pei_vec): New. binutils * testsuite/binutils-all/loongarch64/loongarch64.exp: New file. * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test. * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test. include * coff/loongarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New. Signed-off-by: Youling Tang <tangyouling@loongson.cn>
2022-06-27drop XC16x bitsJan Beulich1-3/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-05-27Remove use of bfd_uint64_t and similarAlan Modra1-6/+6
Requiring C99 means that uses of bfd_uint64_t can be replaced with uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_* and tidies a few places that print 64-bit values.
2022-03-31x86: Remove bfd_arch_l1om and bfd_arch_k1omH.J. Lu1-11/+0
Remove bfd_arch_l1om and bfd_arch_k1om since L1OM/K1OM support has been removed from gas, ld and opcodes. bfd/ * Makefile.am (ALL_MACHINES): Remove cpu-l1om.lo and cpu-k1om.lo. (ALL_MACHINES_CFILES): Remove cpu-l1om.c and cpu-k1om.c. * archures.c (bfd_mach_l1om): Removed. (bfd_mach_l1om_intel_syntax): Likewise. (bfd_mach_k1om): Likewise. (bfd_mach_k1om_intel_syntax): Likewise. (bfd_k1om_arch): Likewise. (bfd_l1om_arch): Likewise. (bfd_archures_list): Remove bfd_k1om_arch and bfd_l1om_arch references. * config.bfd (targ_selvecs): Remove l1om_elf64_vec. l1om_elf64_fbsd_vec, k1om_elf64_vec and k1om_elf64_fbsd_vec. (targ_archs): Remove bfd_l1om_arch and bfd_k1om_arch. * configure.ac (k1om_elf64_vec): Removed. (k1om_elf64_fbsd_vec): Likewise. (l1om_elf64_vec): Likewise. (l1om_elf64_fbsd_vec): Likewise. * cpu-k1om.c: Removed. * cpu-l1om.c: Likewise. * elf64-x86-64.c (elf64_l1om_elf_object_p): Removed. (elf64_k1om_elf_object_p): Likewise. (l1om_elf64_vec): Removed. (l1om_elf64_fbsd_vec): Likewise. (k1om_elf64_vec): Likewise. (k1om_elf64_fbsd_vec): Likewise. (ELF_TARGET_OS): Undefine. * targets.c (_bfd_target_vector): Remove k1om_elf64_vec, k1om_elf64_fbsd_vec, l1om_elf64_vec and l1om_elf64_fbsd_vec. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * configure: Likewise. opcodes/ * configure.ac: Remove bfd_arch_l1om/bfd_arch_k1om references. * disassemble.c (disassembler): Likewise. * configure: Regenerate.
2022-03-16bfd: add AMDGCN architectureSimon Marchi1-0/+5
Add support for the AMDGCN architecture to BFD. This is the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. The specific AMDGCN models added here are a bit arbitrary, based on what we intend to initially support in GDB. This list will need to be updated in the future anyway. The complete up-to-date list of existing AMDGPU models can be found here: https://llvm.org/docs/AMDGPUUsage.html#processors The ELF format for this architecture is documented here: https://llvm.org/docs/AMDGPUUsage.html#elf-code-object The flags for the "HSA" OS ABI are properly versioned and documented on that page. But the NONE, PAL and MESA3D OS ABIs are not well documented nor versioned. Taking a peek at the LLVM source code, we see that they encode their flags the same way as HSA v3. For example, for PAL: https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601 So at least, we know that all AMDGPU objects (of which AMDGCN objects are a subset of) at the time of writing encode the specific GPU model in the EF_AMDGPU_MACH field of e_flags. bfd/ChangeLog: * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add cpu-amdgcn.c. (BFD64_BACKENDS): Add elf64-amdgcn.lo. (BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c. * Makefile.in: Re-generate. * cpu-amdgcn.c: New. * elf64-amdgcn.c: New. * archures.c (bfd_architecture): Add bfd_arch_amdgcn and related mach defines. (bfd_amdgcn_arch): New. (bfd_archures_list): Add bfd_amdgcn_arch. * bfd-in2.h: Re-generate. * config.bfd: Handle amdgcn* target. * configure.ac: Handle amdgcn_elf64_le_vec. * configure: Re-generate. * elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA. * targets.c (amdgcn_elf64_le_vec): New. (_bfd_target_vector): Add amdgcn_elf64_le_vec. include/ChangeLog: * elf/amdgpu.h: New. * elf/common.h (ELFOSABI_AMDGPU_HSA): Add. Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-11-23AArch64: Add support for AArch64 EFI (efi-*-aarch64).Tamar Christina1-0/+2
This adds support for efi-*-aarch64 by virtue of adding a new PEI target pei-aarch64-little. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based aarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. With these changes the resulting file is recognized as an efi image by third party tools: > pecli info hello.efi Metadata ================================================================================ MD5: 598c32a778b0f0deebe977fef8578c4e SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c Imphash: Size: 47561 bytes Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 ) Entry point: 0x2000 (section .text) Sections ================================================================================ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5 .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3 .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131 .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519 .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c Imports ================================================================================ Any magic number is based on the Microsoft PE specification [1]. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * .gitignore (pe-aarch64igen.c): New. * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c, pe-aarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little. * coff-aarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common, _bfd_peAArch64_bfd_copy_private_section_data, _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out, _bfd_peAArch64_print_private_bfd_data_common, _bfd_peAArch64i_final_link_postscript, _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in, _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in, _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in, _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out, _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out, _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out, _bfd_peAArch64i_write_codeview_record, _bfd_peAArch64i_slurp_codeview_record, _bfd_peAArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peAArch64, * pei-aarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peAArch64. (jtab): Add dummy entry that traps. * targets.c (aarch64_pei_vec): New. binutils/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * NEWS: Add new support. * objcopy.c (convert_efi_target): Add efi-*-aarch64 support. * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test. * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test. include/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * coff/aarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
2021-10-24LoongArch bfd supportliuzhensong1-0/+8
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> bfd/ * Makefile.am: Add LoongArch. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-loongarch.c: New. * elf-bfd.h: Add LoongArch. * elf.c: Add LoongArch elfcore_grok_xxx. * elfnn-loongarch.c: New. * elfxx-loongarch.c: New. * elfxx-loongarch.h: New. * reloc.c: Add LoongArch BFD RELOC ENUM. * targets.c: Add LoongArch target. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/BLD-POTFILES.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. include/ * elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}. * elf/loongarch.h: New.
2021-03-31Use bool in bfdAlan Modra1-134/+131
* sysdep.h: POISON_BFD_BOOLEAN: Define. * aix5ppc-core.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aoutx.h, * arc-got.h, * archive.c, * archive64.c, * archures.c, * bfd-in.h, * bfd.c, * bfdwin.c, * binary.c, * cache.c, * coff-alpha.c, * coff-arm.c, * coff-arm.h, * coff-bfd.c, * coff-bfd.h, * coff-go32.c, * coff-i386.c, * coff-ia64.c, * coff-mcore.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic30.c, * coff-tic4x.c, * coff-tic54x.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * corefile.c, * cpu-aarch64.c, * cpu-aarch64.h, * cpu-alpha.c, * cpu-arc.c, * cpu-arm.c, * cpu-arm.h, * cpu-avr.c, * cpu-bfin.c, * cpu-bpf.c, * cpu-cr16.c, * cpu-cris.c, * cpu-crx.c, * cpu-csky.c, * cpu-d10v.c, * cpu-d30v.c, * cpu-dlx.c, * cpu-epiphany.c, * cpu-fr30.c, * cpu-frv.c, * cpu-ft32.c, * cpu-h8300.c, * cpu-hppa.c, * cpu-i386.c, * cpu-ia64.c, * cpu-iamcu.c, * cpu-ip2k.c, * cpu-iq2000.c, * cpu-k1om.c, * cpu-l1om.c, * cpu-lm32.c, * cpu-m10200.c, * cpu-m10300.c, * cpu-m32c.c, * cpu-m32r.c, * cpu-m68hc11.c, * cpu-m68hc12.c, * cpu-m68k.c, * cpu-m9s12x.c, * cpu-m9s12xg.c, * cpu-mcore.c, * cpu-mep.c, * cpu-metag.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-mmix.c, * cpu-moxie.c, * cpu-msp430.c, * cpu-mt.c, * cpu-nds32.c, * cpu-nfp.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-pdp11.c, * cpu-pj.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-riscv.c, * cpu-rl78.c, * cpu-rs6000.c, * cpu-rx.c, * cpu-s12z.c, * cpu-s390.c, * cpu-score.c, * cpu-sh.c, * cpu-sparc.c, * cpu-spu.c, * cpu-tic30.c, * cpu-tic4x.c, * cpu-tic54x.c, * cpu-tic6x.c, * cpu-tilegx.c, * cpu-tilepro.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-vax.c, * cpu-visium.c, * cpu-wasm32.c, * cpu-xc16x.c, * cpu-xgate.c, * cpu-xstormy16.c, * cpu-xtensa.c, * cpu-z80.c, * cpu-z8k.c, * dwarf1.c, * dwarf2.c, * ecoff-bfd.h, * ecoff.c, * ecofflink.c, * elf-attrs.c, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-nacl.c, * elf-nacl.h, * elf-properties.c, * elf-s390-common.c, * elf-s390.h, * elf-strtab.c, * elf-vxworks.c, * elf-vxworks.h, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-arm.h, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-bfin.h, * elf32-cr16.c, * elf32-cr16.h, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-csky.h, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-hppa.h, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m68k.h, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-metag.h, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-nios2.h, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s12z.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-relocs.h, * elf32-sh.c, * elf32-sparc.c, * elf32-spu.c, * elf32-spu.h, * elf32-tic6x.c, * elf32-tic6x.h, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-v850.h, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf32-z80.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-nfp.c, * elf64-ppc.c, * elf64-ppc.h, * elf64-s390.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-mips.h, * elfxx-riscv.c, * elfxx-riscv.h, * elfxx-sparc.c, * elfxx-sparc.h, * elfxx-target.h, * elfxx-tilegx.c, * elfxx-tilegx.h, * elfxx-x86.c, * elfxx-x86.h, * format.c, * genlink.h, * hash.c, * i386aout.c, * i386lynx.c, * i386msdos.c, * ihex.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libecoff.h, * libpei.h, * libxcoff.h, * linker.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mmo.c, * netbsd.h, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-sh.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-sh.c, * pei-x86_64.c, * peicode.h, * plugin.c, * plugin.h, * ppcboot.c, * reloc.c, * reloc16.c, * rs6000-core.c, * section.c, * simple.c, * som.c, * som.h, * srec.c, * stabs.c, * syms.c, * targets.c, * tekhex.c, * verilog.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * vms.h, * wasm-module.c, * xcofflink.c, * xcofflink.h, * xsym.c, * xsym.h: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate.
2021-03-29TRUE/FALSE simplificationAlan Modra1-2/+1
There is really no need to write code like "foo != 0 ? TRUE : FALSE" unless we had stupidly defined FALSE as something other than 0 or TRUE as something other than 1. The simpler "foo != 0" does just as well. Similarly "(condition == TRUE)" or "(condition == FALSE) can be simplified to "(condition)" and "(!condition)" respectively. I'll note that there is reason to use "integer_expression != 0" when assigning a bfd_boolean rather than the simpler "integer_expression", if you expect the variable to have 0 or 1 value. It's probably even a good idea to not rely on implicit conversion if bfd_boolean were _Bool. bfd/ * aoutx.h (aout_link_write_symbols): Don't cast boolean expression to bfd_boolean. * elf32-or1k.c (or1k_set_got_and_rela_sizes): Dont compare booleans against FALSE. * elf32-arc.c (name_for_global_symbol): Don't compare boolean to TRUE. (is_reloc_PC_relative): Don't use "boolean_condition ? TRUE : FALSE". (is_reloc_SDA_relative, is_reloc_for_GOT): Likewise. (is_reloc_for_PLT, is_reloc_for_TLS): Likewise. * elf32-arm.c (stm32l4xx_need_create_replacing_stub): Likewise. * elf32-nds32.c (insert_nds32_elf_blank): Likewise. * elf32-rx.c (rx_set_section_contents): Likewise. * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise. * elfxx-mips.c (_bfd_mips_elf_ignore_undef_symbol): Likewise. * mach-o.c (bfd_mach_o_read_command): Likewise. * targets.c (bfd_get_target_info): Likewise. binutils/ * dlltool.c (main): Don't use "boolean_condition ? TRUE : FALSE". * dwarf.c (read_and_display_attr_value): Likewise. (display_debug_str_offsets): Likewise. * objdump.c (dump_bfd): Likewise. * readelf.c (dump_section_as_strings): Likewise. (dump_section_as_bytes): Likewise. gas/ * atof-generic.c (FALSE, TRUE): Don't define. * config/obj-elf.h (FALSE, TRUE): Don't define. * config/obj-som.h (FALSE, TRUE): Don't define. * config/tc-hppa.h (FALSE, TRUE): Don't define. * config/tc-pdp11.c (FALSE, TRUE): Don't define. * config/tc-iq2000.h (obj_fix_adjustable): Delete. * config/tc-m32r.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-mt.h (obj_fix_adjustable): Delete. * config/tc-nds32.h (TC_FIX_ADJUSTABLE): Delete. * config/tc-arc.c (parse_opcode_flags): Simplify boolean expression. (relaxable_flag, relaxable_operand, assemble_insn): Likewise. (tokenize_extregister): Likewise. * config/tc-csky.c (parse_opcode, get_operand_value): Likewise. (parse_operands_op, parse_operands, md_assemble): Likewise. * config/tc-d10v.c (build_insn): Likewise. * config/tc-score.c (s3_gen_insn_frag): Likewise. * config/tc-score7.c (s7_gen_insn_frag, s7_relax_frag): Likewise. * config/tc-tic6x.c (tic6x_update_features, md_assemble): Likewise. * config/tc-z80.c (emit_byte): Likewise. include/ * opcode/aarch64.h (alias_opcode_p): Simplify boolean expression. (opcode_has_alias, pseudo_opcode_p, optional_operand_p): Likewise. (opcode_has_special_coder): Likewise. ld/ * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Simplify boolean expression. * lexsup.c (parse_args): Likewise. * pe-dll.c (pe_dll_id_target): Likewise. opcodes/ * aarch64-opc.c (vector_qualifier_p): Simplify boolean expression. (fp_qualifier_p, get_data_pattern): Likewise. (aarch64_get_operand_modifier_from_value): Likewise. (aarch64_extend_operator_p, aarch64_shift_operator_p): Likewise. (operand_variant_qualifier_p): Likewise. (qualifier_value_in_range_constraint_p): Likewise. (aarch64_get_qualifier_esize): Likewise. (aarch64_get_qualifier_nelem): Likewise. (aarch64_get_qualifier_standard_value): Likewise. (get_lower_bound, get_upper_bound): Likewise. (aarch64_find_best_match, match_operands_qualifier): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc.h (operand_has_inserter, operand_has_extractor): Likewise. (operand_need_sign_extension, operand_need_shift_by_two): Likewise. (operand_need_shift_by_four, operand_maybe_stack_pointer): Likewise. * arm-dis.c (print_insn_mve, print_insn_thumb32): Likewise. * tic6x-dis.c (tic6x_check_fetch_packet_header): Likewise. (print_insn_tic6x): Likewise.
2021-02-09Remove arm-symbianelfAlan Modra1-4/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-01-07ELF: Don't generate unused section symbolsH.J. Lu1-0/+14
For ELF targets, section symbols are required only for relocations. With -ffunction-sections -fdata-sections, there can be many unused section symbols. Sizes of libstdc++.a on Linux/x86-64 in GCC 11 are With unused section symbols : 39411698 bytes Without unused section symbols: 39227002 bytes The unused section symbols in libstdc++.a occupy more than 180 KB. Add BSF_SECTION_SYM_USED to indicate if a section symbol should be included in the symbol table. The BSF_SECTION_SYM_USED should be set if the section symbol is used for relocation or the section symbol is always included in the symbol table. Add keep_unused_section_symbols to bfd_target to indicate if unused section symbols should be kept. If TARGET_KEEP_UNUSED_SECTION_SYMBOLS is defined as FALSE, unused ection symbols will be removed. Tested on Linux/x86. Other ELF backends need to: 1. Define TARGET_KEEP_UNUSED_SECTION_SYMBOLS to FALSE. 2. Mark used section symbols in assembler backend. 3. Remove unused section symbols from expected assembler and linker outputs. bfd/ PR 27109 * aix386-core.c (core_aix386_vec): Initialize keep_unused_section_symbol to TARGET_KEEP_UNUSED_SECTION_SYMBOLS. * aout-target.h (MY (vec)): Likewise. * binary.c (binary_vec): Likewise. * cisco-core.c (core_cisco_be_vec): Likewise. (core_cisco_le_vec): Likewise. * coff-alpha.c (alpha_ecoff_le_vec): Likewise. * coff-i386.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff-ia64.c (TARGET_SYM): Likewise. * coff-mips.c (mips_ecoff_le_vec): Likewise. (mips_ecoff_be_vec): Likewise. (mips_ecoff_bele_vec): Likewise. * coff-rs6000.c (rs6000_xcoff_vec): Likewise. (powerpc_xcoff_vec): Likewise. * coff-sh.c (sh_coff_small_vec): Likewise. (sh_coff_small_le_vec): Likewise. * coff-tic30.c (tic30_coff_vec): Likewise. * coff-tic54x.c (tic54x_coff0_vec): Likewise. (tic54x_coff0_beh_vec): Likewise. (tic54x_coff1_vec): Likewise. (tic54x_coff1_beh_vec): Likewise. (tic54x_coff2_vec): Likewise. (tic54x_coff2_beh_vec): Likewise. * coff-x86_64.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Likewise. (rs6000_xcoff64_aix_vec): Likewise. * coffcode.h (CREATE_BIG_COFF_TARGET_VEC): Likewise. (CREATE_BIGHDR_COFF_TARGET_VEC): Likewise. (CREATE_LITTLE_COFF_TARGET_VEC): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Likewise. (TARGET_LITTLE_SYM): Likewise. * hppabsd-core.c (core_hppabsd_vec): Likewise. * hpux-core.c (core_hpux_vec): Likewise. * i386msdos.c (i386_msdos_vec): Likewise. * ihex.c (ihex_vec): Likewise. * irix-core.c (core_irix_vec): Likewise. * mach-o-target.c (TARGET_NAME): Likewise. * mmo.c (mmix_mmo_vec): Likewise. * netbsd-core.c (core_netbsd_vec): Likewise. * osf-core.c (core_osf_vec): Likewise. * pdp11.c (MY (vec)): Likewise. * pef.c (pef_vec): Likewise. (pef_xlib_vec): Likewise. * plugin.c (plugin_vec): Likewise. * ppcboot.c (powerpc_boot_vec): Likewise. * ptrace-core.c (core_ptrace_vec): Likewise. * sco5-core.c (core_sco5_vec): Likewise. * som.c (hppa_som_vec): Likewise. * srec.c (srec_vec): Likewise. (symbolsrec_vec): Likewise. * tekhex.c (tekhex_vec): Likewise. * trad-core.c (core_trad_vec): Likewise. * verilog.c (verilog_vec): Likewise. * vms-alpha.c (alpha_vms_vec): Likewise. * vms-lib.c (alpha_vms_lib_txt_vec): Likewise. * wasm-module.c (wasm_vec): Likewise. * xsym.c (sym_vec): Likewise. * elf.c (ignore_section_sym): Return TRUE if BSF_SECTION_SYM_USED isn't set. (elf_map_symbols): Don't include ignored section symbols. * elfcode.h (elf_slurp_symbol_table): Also set BSF_SECTION_SYM_USED on STT_SECTION symbols. * elflink.c (bfd_elf_final_link): Generated section symbols only when emitting relocations or reqired. * elfxx-x86.h (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. * syms.c (BSF_SECTION_SYM_USED): New. * targets.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. (bfd_target): Add keep_unused_section_symbols. (bfd_keep_unused_section_symbols): New. * bfd-in2.h: Regenerated. binutils/ PR 27109 * objcopy.c (copy_object): Handle section symbols for non-relocatable inputs. * testsuite/binutils-all/readelf.exp (readelf_test): Check is_elf_unused_section_symbols. * testsuite/binutils-all/readelf.s-64: Updated. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: New file. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. * testsuite/lib/binutils-common.exp (is_elf_unused_section_symbols): New proc. gas/ChangeLog: PR 27109 * read.c (s_reloc): Call symbol_mark_used_in_reloc on the section symbol. * subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed. * write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc on the section symbol. (set_symtab): Don't generate unused section symbols. (maybe_generate_build_notes): Call symbol_mark_used_in_reloc on the section symbol. * config/obj-elf.c (elf_adjust_symtab): Call symbol_mark_used_in_reloc on the group signature symbol. * testsuite/gas/cfi/cfi-label.d: Remove unused section symbols from expected output. * testsuite/gas/elf/elf.exp (run_elf_list_test): Check is_elf_unused_section_symbols. * testsuite/gas/elf/section2.e: Updated. * testsuite/gas/elf/section2.e-unused: New file. * testsuite/gas/elf/symver.d: Remove unused section symbols. * testsuite/gas/i386/ilp32/elf/symver.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. * testsuite/gas/i386/size-1.d: Likewise. * testsuite/gas/i386/size-3.d: Likewise. * testsuite/gas/i386/svr4.d: Likewise. * testsuite/gas/i386/x86-64-size-1.d: Likewise. * testsuite/gas/i386/x86-64-size-3.d: Likewise. * testsuite/gas/i386/x86-64-size-5.d: Likewise. * testsuite/gas/i386/x86-64-unwind.d: Likewise. ld/ PR 27109 * testsuite/ld-elf/export-class.sd: Adjust the expected output. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/pr19609-4e.d: Likewise. * testsuite/ld-x86-64/pr19609-6a.d: Likewise. * testsuite/ld-x86-64/pr19609-6b.d: Likewise. * testsuite/ld-x86-64/pr19609-7b.d: Likewise. * testsuite/ld-x86-64/pr19609-7d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. * testsuite/ld-x86-64/pr23854.d: Likewise. * testsuite/ld-x86-64/pr25416-3.d: Likewise. * testsuite/ld-x86-64/pr25416-4.d: Likewise. * testsuite/ld-i386/plt-pic.pd: Likewise. * testsuite/ld-i386/plt-pic2.dd: Likewise. * testsuite/ld-i386/plt.pd: Likewise. * testsuite/ld-i386/plt2.dd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbin2.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-i386/tlspic2.rd: Likewise. * testsuite/ld-x86-64/mpx3.dd: Likewise. * testsuite/ld-x86-64/mpx3n.dd: Likewise. * testsuite/ld-x86-64/mpx4.dd: Likewise. * testsuite/ld-x86-64/mpx4n.dd: Likewise. * testsuite/ld-x86-64/pe-x86-64-1.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/plt.pd: Likewise. * testsuite/ld-x86-64/plt2.dd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbin2.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-x86-64/tlspic2.rd: Likewise. * testsuite/ld-elf/sec64k.exp: Check is_elf_unused_section_symbols.
2021-01-06RISC-V: Implement support for big endian targets.Marcus Comstedt1-0/+4
RISC-V instruction/code is always little endian, but data might be big-endian. Therefore, we can not use the original bfd_get/bfd_put to get/put the code for big endian targets. Add new riscv_get_insn and riscv_put_insn to always get/put code as little endian can resolve the problem. Just remember to update them once we have supported the 48-bit/128-bit instructions in the future patches. bfd/ * config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec. * configure.ac: Handle riscv_elf[32|64]_be_vec. * configure: Regenerate. * elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for riscv_is_insn_reloc. (riscv_get_insn): RISC-V instructions are always little endian, but bfd_get may be used for big-endian, so add new riscv_get_insn to handle the insturctions. (riscv_put_insn): Likewsie. (riscv_is_insn_reloc): Check if we are relocaing an instruction. (perform_relocation): Call riscv_is_insn_reloc to decide if we should use riscv_[get|put]_insn or bfd_[get|put]. (riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32 or bfd_[get|put]l16 for code. (riscv_elf_relocate_section): Likewise. (riscv_elf_finish_dynamic_symbol): Likewise. (riscv_elf_finish_dynamic_sections): Likewise. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise. (riscv_elf_object_p): Handled for big endian. (TARGET_BIG_SYM, TARGET_BIG_NAME): Defined. * targets.c: Add riscv_elf[32|64]_be_vec. (_bfd_target_vector): Likewise. gas/ * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and elf32-bigriscv. (install_insn): Always write instructions as little endian. (riscv_make_nops): Likewise. (md_convert_frag_branch): Likewise. (md_number_to_chars): Write data in target endianness. (options, md_longopts): Add -mbig-endian and -mlittle-endian options. (md_parse_option): Handle the endian options. * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not already defined. * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. ld/ * configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*, riscv32be*-*-linux*, and riscv64be*-*-linux*. * Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and eelf32briscv_ilp32.c. * Makefile.in: Regenerate. * emulparams/elf32briscv.sh: Added. * emulparams/elf32briscv_ilp32.sh: Likewise. * emulparams/elf32briscv_ilp32f.sh: Likewise. * emulparams/elf64briscv.sh: Likewise. * emulparams/elf64briscv_lp64.sh: Likewise. * emulparams/elf64briscv_lp64f.sh: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-12-18Constify more arraysAlan Modra1-3/+3
bfd/ * coff-z80.c (bfd_howto_type): Make typedef const. * elf32-z80.c (bfd_howto_type): Likewise. * elf32-m32c.c (EncodingTable): Likewise. * elf32-csky.c (csky_arch_for_merge): Likewise. (csky_archs): Use typedef. * elf32-m68hc11.c (m68hc11_direct_relax_table): Make const. (find_relaxable_insn, m68hc11_elf_relax_section): Adjust to suit. * elf32-ppc.c (ppc_alt_plt): Make const. * elf32-rl78.c (relax_addr16): Likewise. * targets.c (_bfd_associated_vector): Likewise. (bfd_target_vector, bfd_associated_vector): Likewise. * libbfd-in.h (bfd_target_vector, bfd_associated_vector): Likewise. * libbfd.h: Regenerate. include/ * opcode/arc-attrs.h (CONFLICT_LIST): Make const.
2020-10-06PR26667, Add powerpc64le-*-freebsd* supportBrandon Bergren1-0/+2
PR 26667 bfd/ * config.bfd: Add powerpc64le-*-freebsd*. * configure.ac: Add powerpc_elf64_fbsd_le_vec. * elf64-ppc.c (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Define for freebsd. * targets.c (powerpc_elf64_fbsd_le_vec): Declare. (_bfd_target_vector): Add it. * configure: Regenerate. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64lppc_fbsd.c. Include $(DEPDIR)/eelf64lppc_fbsd.Pc. * configure.tgt: Add powerpc64le-*-freebsd*. * emulparams/elf64lppc_fbsd.sh: New file. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-07-09Remove powerpc PE supportAlan Modra1-8/+0
Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2020-06-30Remove x86 NaCl target supportH.J. Lu1-6/+0
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-06-16Really remove tic30-aout supportAlan Modra1-2/+0
bfd/ * aout-tic30.c: Delete file. * Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo. (BFD32_BACKENDS_CFILES): Remove aout-tic30.c. * config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry. (xc16x-*-elf): Sort properly. * configure.ac: Remove tic30_aout_vec. * targets.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-tic30.h: Remove OBJ_AOUT support. * configure.tgt: Delete tic30-*-*aout* entry. ld/ * emulparams/tic30aout.sh: Delete file. * scripttempl/tic30aout.sc: Delete file. * Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and delete dependency. * configure.tgt: Delete tic30-*-*aout* entry. * testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention. * testsuite/ld-scripts/segment-start.d: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-05-21Replace "if (x) free (x)" with "free (x)", bfdAlan Modra1-2/+1
* aoutx.h: Replace "if (x) free (x)" with "free (x)" throughout. * archive.c, * bfd.c, * bfdio.c, * coff-alpha.c, * coff-ppc.c, * coff-sh.c, * coff-stgo32.c, * coffcode.h, * coffgen.c, * cofflink.c, * cpu-arm.c, * doc/chew.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * elf-eh-frame.c, * elf-m10200.c, * elf-m10300.c, * elf-strtab.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-crx.c, * elf32-epiphany.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-ip2k.c, * elf32-m32c.c, * elf32-m68hc11.c, * elf32-m68k.c, * elf32-microblaze.c, * elf32-msp430.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-sh.c, * elf32-spu.c, * elf32-v850.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c * elf64-mmix.c, * elf64-ppc.c, * elf64-sparc.c, * elfcode.h, * elflink.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-x86.c, * format.c, * ihex.c, * libbfd.c, * linker.c, * mmo.c, * opncls.c, * pdp11.c, * peXXigen.c, * pef.c, * peicode.h, * simple.c, * som.c, * srec.c, * stabs.c, * syms.c, * targets.c, * vms-lib.c, * xcofflink.c, * xtensa-isa.c: Likewise.
2020-04-27x86: Add i386 PE big-object supportTamar Christina1-2/+4
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a couple of years ago. The BIG OBJ format is a slightly different COFF format which extends the size of the number of section field in the header from a uint16_t to a uint32_t and so greatly increases the number of sections allowed. However the 32-bit version of bfd never got support for this. The GHC Haskell compiler generates a great deal of symbols due to it's use of -ffunction-sections and -fdata-sections. This meant that we could not build the 32-bit version of the GHC Compiler for many releases now as binutils didn't have this support. This patch adds the support to the 32-bit port of binutils as well and also does come cleanup in the code. bfd/ChangeLog: * coff-i386.c (COFF_WITH_PE_BIGOBJ): New. * coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New. * config.bfd (targ_selvecs): Rename x86_64_pe_be_vec to x86_64_pe_big_vec as it not a big-endian format. (vec i386_pe_big_vec): New. * configure.ac: Likewise. * targets.c: Likewise. * configure: Regenerate. * pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG, COFF_WITH_PE_BIGOBJ): New. * pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG): New. (x86_64_pe_be_vec): Moved. gas/ChangeLog: * NEWS: Add news entry for big-obj. * config/tc-i386.c (i386_target_format): Support new format. * doc/c-i386.texi: Add i386 support. * testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific. * testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well. ld/ChangeLog: * pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
2020-03-24bfd: Add a bfd_boolean argument to bfd_get_symbol_version_stringH.J. Lu1-2/+3
We can't call _bfd_elf_get_symbol_version_name from nm.c since it isn't available for all target configurations. This patch add a bfd_boolean argument to bfd_get_symbol_version_string instead. bfd/ PR binutils/25708 * elf-bfd.h (_bfd_elf_get_symbol_version_name): Renamed to ... (_bfd_elf_get_symbol_version_string): This. * elf.c (_bfd_elf_get_symbol_version_name): Renamed to ... (_bfd_elf_get_symbol_version_string): This. (bfd_elf_print_symbol): Pass TRUE to _bfd_elf_get_symbol_version_string. * libbfd-in.h (_bfd_nosymbols_get_symbol_version_string): Add a bfd_boolean argument. * syms.c (_bfd_nosymbols_get_symbol_version_string): Likewise. * targets.c (_bfd_get_symbol_version_string): Likewise. (bfd_get_symbol_version_string): Likewise. * bfd-in2.h: Regenerated. binutils/ PR binutils/25708 * nm.c (print_symname): Replace _bfd_elf_get_symbol_version_name with bfd_get_symbol_version_string. (print_symbo): Pass TRUE to bfd_get_symbol_version_string. * objdump.c (objdump_print_symname): Likewise.
2020-03-02bfd_cleanup for object_pAlan Modra1-3/+5
The object_p (and archive_p, core_file_p) functions are not supposed to have any target specific malloc'd memory attached to the bfd on their return. This should be obvious on a failure return, but it's also true for a successful return. The reason is that even though the object_p recognises the file, that particular target may not be used and thus the bfd won't be closed calling close_and_cleanup for the target that allocated the memory. It turns out that the object_p bfd_target* return value isn't needed. In all cases except ld/plugin.c the target is abfd->xvec and with ld/plugin.c the target isn't used. So this patch returns a cleanup function from object_p instead, called in bfd_check_format_matches to tidy the bfd before trying a different target match. The only cleanup that does anything at this stage is the alpha-vms one. bfd/ * targets.c (bfd_cleanup): New typedef. (struct bfd <_bfd_check_format>): Return a bfd_cleanup. * libbfd-in.h (_bfd_no_cleanup): Define. * format.c (bfd_reinit): Add cleanup parameter, call it. (bfd_check_format_matches): Set cleanup from _bfd_check_format call and pass to bfd_reinit. Delete temp, use abfd->xvec instead. * aout-target.h (callback, object_p): Return bfd_cleanup. * aout-tic30.c (tic30_aout_callback, tic30_aout_object_p): Likewise. * archive.c (bfd_generic_archive_p): Likewise. * binary.c (binary_object_p): Likewise. * coff-alpha.c (alpha_ecoff_object_p): Likewise. * coff-ia64.c (ia64coff_object_p): Likewise. * coff-rs6000.c (_bfd_xcoff_archive_p, rs6000coff_core_p): Likewise. * coff-sh.c (coff_small_object_p): Likewise. * coff-stgo32.c (go32_check_format): Likewise. * coff64-rs6000.c (xcoff64_archive_p, rs6000coff_core_p), (xcoff64_core_p): Likewise. * coffgen.c (coff_real_object_p, coff_object_p): Likewise. * elf-bfd.h (bfd_elf32_object_p, bfd_elf32_core_file_p), (bfd_elf64_object_p, bfd_elf64_core_file_p): Likewise. * elfcode.h (elf_object_p): Likewise. * elfcore.h (elf_core_file_p): Likewise. * i386msdos.c (msdos_object_p): Likewise. * ihex.c (ihex_object_p): Likewise. * libaout.h (some_aout_object_p): Likewise. * libbfd-in.h (bfd_generic_archive_p, _bfd_dummy_target), (_bfd_vms_lib_alpha_archive_p, _bfd_vms_lib_ia64_archive_p): Likewise. * libbfd.c (_bfd_dummy_target): Likewise. * libcoff-in.h (coff_object_p): Likewise. * mach-o-aarch64.c (bfd_mach_o_arm64_object_p), (bfd_mach_o_arm64_core_p): Likewise. * mach-o-arm.c (bfd_mach_o_arm_object_p), (bfd_mach_o_arm_core_p): Likewise. * mach-o-i386.c (bfd_mach_o_i386_object_p), (bfd_mach_o_i386_core_p): Likewise. * mach-o-x86-64.c (bfd_mach_o_x86_64_object_p), (bfd_mach_o_x86_64_core_p): Likewise. * mach-o.c (bfd_mach_o_header_p, bfd_mach_o_gen_object_p), (bfd_mach_o_gen_core_p, bfd_mach_o_fat_archive_p): Likewise. * mach-o.h (bfd_mach_o_object_p, bfd_mach_o_core_p), (bfd_mach_o_fat_archive_p, bfd_mach_o_header_p): Likewise. * mmo.c (mmo_object_p): Likewise. * pef.c (bfd_pef_object_p, bfd_pef_xlib_object_p): Likewise. * peicode.h (coff_real_object_p, pe_ILF_object_p), (pe_bfd_object_p): Likewise. * plugin.c (ld_plugin_object_p, bfd_plugin_object_p): Likewise. * ppcboot.c (ppcboot_object_p): Likewise. * rs6000-core.c (rs6000coff_core_p): Likewise. * som.c (som_object_setup, som_object_p): Likewise. * srec.c (srec_object_p, symbolsrec_object_p): Likewise. * tekhex.c (tekhex_object_p): Likewise. * vms-alpha.c (alpha_vms_object_p): Likewise. * vms-lib.c (_bfd_vms_lib_archive_p, _bfd_vms_lib_alpha_archive_p), (_bfd_vms_lib_ia64_archive_p, _bfd_vms_lib_txt_archive_p): Likewise. * wasm-module.c (wasm_object_p): Likewise. * xsym.c (bfd_sym_object_p): Likewise. * xsym.h (bfd_sym_object_p): Likewise. * aoutx.h (some_aout_object_p): Likewise, and callback parameter return type. * pdp11.c (some_aout_object_p): Likewise. * plugin.c (register_ld_plugin_object_p): Update object_p parameter type. * plugin.h (register_ld_plugin_object_p): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate. ld/ * plugin.c (plugin_object_p): Return a bfd_cleanup. (plugin_cleanup): New function.
2020-02-19bfd_size_type to size_tAlan Modra1-1/+1
bfd_size_type was invented a long time ago in the K&R days. Many places in binutils ought to be using size_t instead (and there are lots of places that use long or unsigned long that really ought to use size_t too). Note that you can't change everything over to size_t: A 32-bit host needs a larger type than size_t to support reading and processing of 64-bit ELF object files. This patch just tidies some of the more obvious uses of bfd_size_type that could be size_t. There no doubt are more lurking in the source. Incidentally, practically all functions used for output of object files can use size_t and don't need to worry about overflow of size expressions. If you have something like symcount * sizeof (void *) when symcount is counting symbols already in memory then you know that this expression can't overflow since the size of a symbol in memory is larger by far than that of a pointer. * aix386-core.c (aix386_core_file_p): Use size_t for "amt". * aout-target.h (object_p): Likewise. * aout-tic30.c (tic30_aout_object_p): Likewise. * aoutx.h (some_aout_object_p, mkobject, make_empty_symbol), (emit_stringtab, write_syms, link_hash_table_create), (aout_link_write_other_symbol): Likewise. * archive.c (_bfd_generic_mkarchive, bfd_generic_archive_p), (bfd_ar_hdr_from_filesystem, _bfd_write_archive_contents), (_bfd_compute_and_write_armap): Likewise. * archures.c (bfd_arch_list): Likewise. * bfd.c (bfd_record_phdr): Likewise. * binary.c (binary_canonicalize_symtab): Likewise. * cisco-core.c (cisco_core_file_validate): Likewise. * coff-arm.c (coff_arm_link_hash_table_create, find_thumb_glue), (find_arm_glue, record_arm_to_thumb_glue), (record_thumb_to_arm_glue): Likewise. * coff-ppc.c (ppc_coff_link_hash_table_create, record_toc), (ppc_allocate_toc_section): Likewise. * coff-rs6000.c (_bfd_xcoff_mkobject, _bfd_xcoff_archive_p): Likewise. * coff-sh.c (sh_relax_section): Likewise. * coff64-rs6000.c (xcoff64_archive_p): Likewise. * coffcode.h (handle_COMDAT, coff_new_section_hook), (coff_set_alignment_hook, coff_mkobject), (coff_compute_section_file_positions): Likewise. * coffgen.c (coff_make_empty_symbol, coff_bfd_make_debug_symbol), (coff_find_nearest_line_with_names), ( bfd_coff_set_symbol_class): Likewise. * cofflink.c (_bfd_coff_link_hash_table_create), (_bfd_coff_link_input_bfd): Likewise. * dwarf1.c (alloc_dwarf1_unit, alloc_dwarf1_func): Likewise. * dwarf2.c (read_abbrevs, read_attribute_value, add_line_info), (build_line_info_table, sort_line_sequences), (line_info_add_include_dir, line_info_add_file_name), (decode_line_info, scan_unit_for_symbols, parse_comp_unit), (place_sections, _bfd_dwarf2_slurp_debug_info): Likewise. * ecoff.c (_bfd_ecoff_mkobject, _bfd_ecoff_make_empty_symbol), (_bfd_ecoff_find_nearest_line), (_bfd_ecoff_bfd_link_hash_table_create): Likewise. * ecofflink.c (bfd_ecoff_debug_init): Likewise. * elf-hppa.h (_bfd_elf_hppa_gen_reloc_type): Likewise. * elf-m10300.c (mn10300_elf_relax_section), (elf32_mn10300_link_hash_table_create): Likewise. * elf-strtab.c (_bfd_elf_strtab_init): Likewise. * elf.c (make_mapping, copy_elf_program_header): Likewise. * elf32-arm.c (elf32_arm_link_hash_table_create), (elf32_arm_setup_section_lists, elf32_arm_check_relocs), (elf32_arm_new_section_hook): Likewise. * elf32-avr.c (elf_avr_new_section_hook), (elf32_avr_link_hash_table_create, get_local_syms), (elf32_avr_setup_section_lists): Likewise. * elf32-bfin.c (bfinfdpic_elf_link_hash_table_create), (bfin_link_hash_table_create): Likewise. * elf32-cr16.c (elf32_cr16_link_hash_table_create): Likewise. * elf32-cris.c (elf_cris_link_hash_table_create): Likewise. * elf32-csky.c (csky_elf_link_hash_table_create), (csky_elf_check_relocs, elf32_csky_setup_section_lists): Likewise. * elf32-frv.c (frvfdpic_elf_link_hash_table_create): Likewise. * elf32-hppa.c (elf32_hppa_link_hash_table_create), (elf32_hppa_setup_section_lists, get_local_syms): Likewise. * elf32-i386.c (elf_i386_check_relocs): Likewise. * elf32-lm32.c (lm32_elf_link_hash_table_create): Likewise. * elf32-m32r.c (m32r_elf_link_hash_table_create), (m32r_elf_check_relocs): Likewise. * elf32-m68hc1x.c (m68hc11_elf_hash_table_create), (elf32_m68hc11_setup_section_lists), (elf32_m68hc11_size_stubs): Likewise. * elf32-m68k.c (elf_m68k_link_hash_table_create): Likewise. * elf32-metag.c (elf_metag_link_hash_table_create), (elf_metag_setup_section_lists): Likewise. * elf32-microblaze.c (microblaze_elf_link_hash_table_create), (microblaze_elf_check_relocs): Likewise. * elf32-nds32.c (nds32_elf_link_hash_table_create), (nds32_elf_check_relocs): Likewise. * elf32-nios2.c (nios2_elf32_setup_section_lists), (get_local_syms, nios2_elf32_check_relocs), (nios2_elf32_link_hash_table_create): Likewise. * elf32-or1k.c (or1k_elf_link_hash_table_create), (or1k_elf_check_relocs): Likewise. * elf32-ppc.c (ppc_elf_modify_segment_map, update_plt_info): Likewise. * elf32-pru.c (pru_elf32_link_hash_table_create): Likewise. * elf32-s390.c (elf_s390_link_hash_table_create), (elf_s390_check_relocs): Likewise. * elf32-score.c (score_elf_create_got_section), (s3_elf32_score_new_section_hook), (elf32_score_link_hash_table_create): Likewise. * elf32-score7.c (score_elf_create_got_section), (s7_elf32_score_new_section_hook): Likewise. * elf32-sh.c (sh_elf_link_hash_table_create), (sh_elf_check_relocs): Likewise. * elf32-tic6x.c (elf32_tic6x_link_hash_table_create), (elf32_tic6x_new_section_hook, elf32_tic6x_check_relocs): Likewise. * elf32-tilepro.c (tilepro_elf_link_hash_table_create), (tilepro_elf_check_relocs): Likewise. * elf32-v850.c (remember_hi16s_reloc): Likewise. * elf32-vax.c (elf_vax_link_hash_table_create): Likewise. * elf32-xtensa.c (elf_xtensa_link_hash_table_create), (elf_xtensa_new_section_hook): Likewise. * elf64-alpha.c (elf64_alpha_bfd_link_hash_table_create), (get_got_entry, elf64_alpha_check_relocs): Likewise. * elf64-hppa.c (elf64_hppa_hash_table_create): Likewise. * elf64-ia64-vms.c (elf64_ia64_object_p): Likewise. * elf64-mmix.c (mmix_elf_new_section_hook): Likewise. * elf64-ppc.c (ppc64_elf_new_section_hook), (ppc64_elf_link_hash_table_create, update_local_sym_info), (update_plt_info, ppc64_elf_check_relocs): Likewise. * elf64-s390.c (elf_s390_link_hash_table_create), (elf_s390_check_relocs): Likewise. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. * elflink.c (bfd_elf_link_record_local_dynamic_symbol), (_bfd_elf_link_find_version_dependencies, elf_link_add_object_symbols), (elf_link_add_archive_symbols, compute_bucket_count), (bfd_elf_size_dynsym_hash_dynstr, _bfd_elf_link_hash_table_create), (bfd_elf_get_bfd_needed_list, elf_link_swap_symbols_out), (bfd_elf_final_link): Likewise. * elfnn-aarch64.c (elfNN_aarch64_link_hash_table_create), (elfNN_aarch64_setup_section_lists, elfNN_aarch64_check_relocs), (elfNN_aarch64_new_section_hook): Likewise. * elfnn-ia64.c (elfNN_ia64_object_p): Likewise. * elfnn-riscv.c (riscv_elf_link_hash_table_create), (riscv_elf_check_relocs): Likewise. * elfxx-mips.c (_bfd_mips_elf_new_section_hook), (_bfd_mips_elf_add_symbol_hook, _bfd_mips_elf_check_relocs), (_bfd_mips_elf_modify_segment_map, _bfd_mips_elf_set_section_contents), (_bfd_mips_elf_link_hash_table_create): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_link_hash_table_create), (_bfd_sparc_elf_check_relocs), (_bfd_sparc_elf_new_section_hook): Likewise. * elfxx-tilegx.c (tilegx_elf_link_hash_table_create), (tilegx_elf_check_relocs): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Likewise. * format.c (bfd_check_format_matches): Likewise. * hash.c (_bfd_stringtab_init): Likewise. * ihex.c (ihex_scan): Likewise. * irix-core.c (irix_core_core_file_p): Likewise. * linker.c (bfd_wrapped_link_hash_lookup), (_bfd_generic_link_hash_table_create), (_bfd_generic_reloc_link_order): Likewise. * lynx-core.c (lynx_core_file_p): Likewise. * netbsd-core.c (netbsd_core_file_p): Likewise. * osf-core.c (osf_core_core_file_p): Likewise. * pdp11.c (some_aout_object_p, mkobject, make_empty_symbol), (link_hash_table_create, aout_link_write_other_symbol): Likewise. * peXXigen.c (_bfd_XX_bfd_copy_private_section_data): Likewise. * peicode.h (pe_mkobject): Likewise. * ppcboot.c (ppcboot_mkobject, ppcboot_canonicalize_symtab): Likewise. * ptrace-core.c (ptrace_unix_core_file_p): Likewise. * sco5-core.c (read_uarea): Likewise. * som.c (hppa_som_gen_reloc_type, som_object_p, som_prep_headers), (som_write_fixups, som_write_space_strings, som_write_symbol_strings), (som_finish_writing, som_canonicalize_symtab, som_new_section_hook), (som_bfd_copy_private_section_data, bfd_som_set_section_attributes), (bfd_som_attach_aux_hdr, som_write_armap): Likewise. * srec.c (srec_scan): Likewise. * syms.c (_bfd_generic_make_empty_symbol): Likewise. * targets.c (bfd_target_list): Likewise. * tekhex.c (first_phase, tekhex_sizeof_headers): Likewise. * trad-core.c (trad_unix_core_file_p): Likewise. * vms-alpha.c (vms_initialize, alpha_vms_bfd_link_hash_table_create), (vms_new_section_hook): Likewise. * wasm-module.c (wasm_make_empty_symbol): Likewise. * xcofflink.c (xcoff_get_section_contents), (_bfd_xcoff_bfd_link_hash_table_create, xcoff_set_import_path), (xcoff_find_function, bfd_xcoff_link_record_set, xcoff_build_ldsym), (bfd_xcoff_size_dynamic_sections, xcoff_link_input_bfd): Likewise.
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-0/+2
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-17Remove tic80 supportAlan Modra1-2/+0
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2019-11-07Remove CR16C supportAlan Modra1-2/+0
I think it is past time to remove CR16C support. CR16C was added in 2004, and only for ld. gas and binutils support is lacking, and there have been no commits to bfd/elf32-cr16c.c other than warning fixes or global maintainers making changes to all targets. I see no maintainer listed for CR16C, and no commits from anyone at NSC supporting the target. Furthermore, at the time the CR16 support was added in 2007, config.sub was changed upstream to no longer recognise cr16c as a valid cpu. That means the CR16C ld support is only available as a secondary target by configuring with, for example, --enable-targets=all or --enable-targets=cr16c-unknown-elf. No testing of the CR16C target is possible. include/ * elf/cr16c.h: Delete. bfd/ * cpu-cr16c.c: Delete. * elf32-cr16c.c: Delete. * Makefile.am, * archures.c, * config.bfd, * configure.ac, * reloc.c, * targets.c: Remove cr16c support. * Makefile.in, * bfd-in2.h, * configure, * libbfd.h, * po/SRC-POTFILES.in: Regenerate. ld/ * emulparams/elf32cr16c.sh: Delete. * scripttempl/elf32cr16c.sc: Delete. * Makefile.am, * configure.tgt: Remove cr16c support. * NEWS: Mention removal of cr16c. * Makefile.in, * po/BLD-POTFILES.in: Regenerate.
2019-09-20bfd macro conversion to inline functions, asymbolAlan Modra1-0/+8
* bfd-in.h (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_asymbol_flavour, bfd_set_asymbol_name): Delete. * bfd.c (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_set_asymbol_name): New inline functions. * targets.c (bfd_asymbol_flavour): Likewise. * bfd-in2.h: Regenerate.
2019-09-20bfd macro conversion to inline functionsAlan Modra1-0/+60
This converts some of the macros that access struct bfd fields to inline functions. bfd/ * archive.c (bfd_generic_archive_p): Use bfd_set_thin_archive. * bfd-in.h (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_target, bfd_get_flavour, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian, bfd_header_little_endian), (bfd_get_file_flags, bfd_applicable_file_flags), (bfd_applicable_section_flags, bfd_has_map, bfd_is_thin_archive), (bfd_valid_reloc_types, bfd_usrdata, bfd_get_start_address), (bfd_get_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_get_dynamic_symcount, bfd_get_symbol_leading_char): Delete. * bfd/bfd.c (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_file_flags, bfd_get_start_address, bfd_get_symcount), (bfd_get_dynamic_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_has_map, bfd_is_thin_archive, bfd_set_thin_archive), (bfd_usrdata, bfd_set_usrdata): New inline functions. * targets.c (bfd_get_target, bfd_get_flavour), (bfd_applicable_file_flags, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian), (bfd_header_little_endian, bfd_applicable_section_flags), (bfd_get_symbol_leading_char): New inline functions. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Use bfd_set_thin_archive. gdb/ * gdb_bfd.c (gdb_bfd_ref, gdb_bfd_unref): Use bfd_set_usrdata. * dwarf2read.c (dwarf2_read_gdb_index, dwarf2_read_debug_names), (read_indirect_string_from_dwz): Use bfd accessor. * dwarf2read.h (struct dwz_file <filename>): Likewise. * machoread.c (macho_symfile_read_all_oso): Likewise. * solib.c (solib_bfd_open): Likewise. ld/ * ldelf.c (ldelf_after_open, ldelf_place_orphan * ldlang.c (walk_wild_file, lang_process): Use bfd_usrdata. (load_symbols, ldlang_add_file): Use bfd_set_usrdata. * ldmain.c (add_archive_element): Use bfd_usrdata. * ldlang.h (bfd_input_just_syms): New inline function. * emultempl/aarch64elf.em (build_section_lists): Use it. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/ppc64elf.em (build_section_lists): Likewise. sim/ * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
2019-09-18Constify target name, reloc name, and carsym nameAlan Modra1-1/+1
bfd/ * bfd-in.h (carsym.name): Make const. * reloc.c (struct reloc_howto_struct.name): Likewise. * targets.c (bfd_target.name): Likewise.! * bfd.c (bfd_get_sign_extend_vma): Make variable const. * som.c (som_bfd_fill_in_ar_symbols): Use an intermediary variable when setting carsym.name. * bfd-in2.h: Regenerate. gdb/ * amd64-dicos-tdep.c (amd64_dicos_osabi_sniffer): Constify target. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Likewise. * i386-dicos-tdep.c (i386_dicos_osabi_sniffer): Likewise. ld/ * ldlang.c (stricpy, strcut, name_compare): Constify params. (get_first_input_target): Make return and "target" const.
2019-09-11Tidy ld/ldmisc.cAlan Modra1-0/+4
The idea here is to not use elf-bfd.h and coff-bfd.h in generic linker code. bfd/ * targets.c (struct bfd_target): Add _bfd_group_name. (BFD_JUMP_TABLE): Likewise. * coffgen.c (bfd_coff_group_name): New function. * elf.c (bfd_elf_group_name): New function. * linker.c (_bfd_nolink_bfd_group_name): New function. * section.c (bfd_generic_group_name): New function. * elf-bfd.h (bfd_elf_group_name): Declare. * libbfd-in.h (_bfd_nolink_bfd_group_name): Declare. * libcoff-in.h (bfd_coff_group_name): Declare. * aout-target.h (MY_bfd_group_name): Define. * aout-tic30.c (MY_bfd_group_name): Define. * bfd.c (bfd_group_name): Define. * binary.c (binary_bfd_group_name): Define. * coff-alpha.c (_bfd_ecoff_bfd_group_name): Define. * coff-mips.c (_bfd_ecoff_bfd_group_name): Define. * coff-rs6000.c (_bfd_xcoff_bfd_group_name): Define. * coffcode.h (coff_bfd_group_name): Define. * elfxx-target.h (bfd_elfNN_bfd_group_name): Define. * i386msdos.c (msdos_bfd_group_name): Define. * ihex.c (ihex_bfd_group_name): Define. * mach-o-target.c (bfd_mach_o_bfd_group_name): Define. * mmo.c (mmo_bfd_group_name): Define. * pef.c (bfd_pef_bfd_group_name): Define. * plugin.c (bfd_plugin_bfd_group_name): Define. * ppcboot.c (ppcboot_bfd_group_name): Define. * som.c (som_bfd_group_name): Define. * srec.c (srec_bfd_group_name): Define. * tekhex.c (tekhex_bfd_group_name): Define. * verilog.c (verilog_bfd_group_name): Define. * vms-alpha.c (vms_bfd_group_name, alpha_vms_bfd_group_name): Define. * xsym.c (bfd_sym_bfd_group_name): Define. * coff64-rs6000.c (rs6000_xcoff64_vec): Init new field. (rs6000_xcoff64_aix_vec): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate. ld/ * ldmisc.c: Don't #include elf-bfd.h or coff-bfd.h. (vfinfo): Use bfd_group_name.
2019-06-28Plugin target handlingAlan Modra1-4/+4
This patch fixes failures with LTO on mingw32 targets. Since git commit 7cf7fcc83c all possible targets (minus binary) are matched in bfd_check_format_matches rather than lower priority targets being excluded once a higher priority target matches. During linking that results in the ld/plugin.c plugin_object_p function being called with the input file xvec set to plugin_vec, which means plugin_get_ir_dummy_bfd doesn't see the real format of the file (pe-i386). It defaults to the output format instead, which happens to be pei-i386, and this wrong choice persists for the dummy bfd. pei-i386 isn't recognised as a valid linker input file. So, omit recognizing a plugin object in bfd_check_format_matches when some other object format matches, and make sure those other object formats are checked first. * format.c (bfd_check_format_matches): Don't match plugin target if another target matches. Expand comment. * targets.c (_bfd_target_vector): Move plugin_vec after all other non-corefile targets, outside !SELECT_VECS. * config.bfd: Don't handle targ=plugin here. * configure.ac: Don't add plugin to enable_targets or handle in target loop setting selvecs and other target vars. * configure: Regenerate.
2019-05-23bfd: add support for eBPFJose E. Marchesi1-0/+7
This patch adds support to BFD for elf64-bpf, in both little-endian and big-endian variants. bfd/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Add bpf_elf64_le_vec and bpf_elf64_be_vec. * configure: Regenerated. * Makefile.am (ALL_MACHINES): Add cpu-bpf.lo. (ALL_MACHINES_CFILES): Add cpu-bpf.c. (BFD64_BACKENDS): Add elf64-bpf.lo. (BFD64_BACKENDS_CFILES): Add elf64-bpf.c. * Makefile.in (SOURCE_HFILES): Regenerate. * config.bfd (targ_cpu): Handle bpf-*-* targets. * cpu-bpf.c: New file. * elf64-bpf.c: Likewise. * targets.c (_bfd_target_vector): Add bpf_elf64_be_vec and bpf_elf64_le_vec. * archures.c: Define architecture bfd_arch_bpf and machine bfd_arch_bpf. * reloc.c: Define BFD relocations used by the BPF target. * bfd-in2.h: Regenerated. * libbfd.h: Likewise.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-07rx: Add target rx-*-linux.Yoshinori Sato1-0/+1
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+5
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-05-21ld: Hide symbols defined by HIDDEN/PROVIDE_HIDDENH.J. Lu1-0/+5
There should be no difference in output for symbols defined by HIDDEN or PROVIDE_HIDDEN assignments whether they are explicitly marked as hidden or not. This patch adds a new BFD function, bfd_link_hide_symbol, to hide symbols defined by HIDDEN and PROVIDE_HIDDEN assignments. bfd PR ld/23201 * aout-target.h (MY_bfd_link_hide_symbol): New. * aout-tic30.c (MY_bfd_link_hide_symbol): Likewise. * binary.c (binary_bfd_link_hide_symbol): Likewise. * coff-alpha.c (_bfd_ecoff_bfd_link_hide_symbol): Likewise. * coff-mips.c (_bfd_ecoff_bfd_link_hide_symbol): Likewise. * coff-rs6000.c (_bfd_xcoff_bfd_link_hide_symbol): Likewise. * coffcode.h (coff_bfd_link_hide_symbol): Likewise. * elf-bfd.h (_bfd_elf_link_hide_symbol): Likewise. * elfxx-target.h (bfd_elfNN_bfd_link_hide_symbol): Likewise. * i386msdos.c (msdos_bfd_link_hide_symbol): Likewise. * ihex.c (ihex_bfd_link_hide_symbol): Likewise. * libbfd-in.h (_bfd_nolink_bfd_link_hide_symbol): Likewise. * linker.c (_bfd_generic_link_hide_symbol): Likewise. (bfd_link_hide_symbol): Likewise. * mach-o-target.c (bfd_mach_o_bfd_link_hide_symbol): Likewise. * mmo.c (mmo_bfd_link_hide_symbol): Likewise. * pef.c (bfd_pef_bfd_link_hide_symbol): Likewise. * plugin.c (bfd_plugin_bfd_link_hide_symbol): Likewise. * ppcboot.c (ppcboot_bfd_link_hide_symbol): Likewise. * som.c (som_bfd_link_hide_symbol): Likewise. * srec.c (srec_bfd_link_hide_symbol): Likewise. * tekhex.c (tekhex_bfd_link_hide_symbol): Likewise. * vms-alpha.c (vms_bfd_link_hide_symbol): Likewise. (alpha_vms_bfd_link_hide_symbol): Likewise. * xsym.c (bfd_sym_bfd_link_hide_symbol): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_link_hide_symbol. (rs6000_xcoff64_aix_vec): Likewise. * elflink.c (bfd_elf_record_link_assignment): Don't make forced local symbol dynamic. (_bfd_elf_link_hide_symbol): New function. * elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't check root.ldscript_def. * targets.c (bfd_target): Add _bfd_link_hide_symbol. (BFD_JUMP_TABLE_LINK): Add NAME##_bfd_link_hide_symbol. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. ld/ PR ld/23201 * ldexp.c (exp_fold_tree_1): Call bfd_link_hide_symbol to hide a symbol. * testsuite/ld-elf/provide-hidden-dynabs.nd: Removed. * testsuite/ld-elf/provide-hidden-dynsec.nd: Likewise. * testsuite/ld-elf/provide-hidden.exp: Replace provide-hidden-dynsec.nd with provide-hidden-sec.nd and provide-hidden-dyn.nd. Replace provide-hidden-dynabs.nd with provide-hidden-abs.nd and provide-hidden-dyn.nd. * testsuite/ld-i386/pr23189.d: Expect no dynamic relocation. * testsuite/ld-x86-64/pr23189.d: Likewise.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+3
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-15Fix error messages in the NFP sources when building for 32-bit targets.Francois H. Theron1-0/+2
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef. include * opcode/nfp.h: Use uint64_t instead of bfd_vma. opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron1-0/+3
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-25[ARM] Add armelf_linux_fdpiceabi and armelfb_linux_fdpiceabi BFD backendsChristophe Lyon1-0/+4
Initial definition of these new backends. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * config.bfd (arm*-*-linux-*): Add arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec to targ_selvecs. Accept arm*-*-uclinuxfdpiceabi. * configure.ac: Add support for arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec. * configure: Regenerate. * elf32-arm.c (struct elf32_arm_link_hash_table): Add fdpic_p. (elf32_arm_link_hash_table_create): Initialize fdpic_p. (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, TARGET_BIG_SYM) (TARGET_BIG_NAME, elf_match_priority): Define for FDPIC targets. (elf32_arm_fdpic_link_hash_table_create): New. * targets.c (_bfd_target_vector): Add arm_elf32_fdpic_be_vec and arm_elf32_fdpic_le_vec. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Add earmelf_linux_fdpiceabi.c and earmelfb_linux_fdpiceabi.c. (earmelf_linux_fdpiceabi.c, earmelfb_linux_fdpiceabi.c): New rules. * Makefile.in: Regenerate. * configure.tgt (arm*-*-uclinuxfdpiceabi): Handle new target. * emulparams/armelf_linux_fdpiceabi.sh: New. * emulparams/armelfb_linux_fdpiceabi.sh: New.
2018-04-25Remove arm-aout and arm-coff supportAlan Modra1-18/+0
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. bfd/ * Makefile.am: Remove arm-aout and arm-coff support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * aout-arm.c: Delete. * armnetbsd.c: Delete. * riscix.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and arm-coff support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove arm-aout and arm-coff support. * config/tc-arm.c: Likewise. * config/tc-arm.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/aarch64/codealign.d: Likewise. * testsuite/gas/aarch64/mapping.d: Likewise. * testsuite/gas/aarch64/mapping2.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/addsw-bad.d: Likewise. * testsuite/gas/arm/align.d: Likewise. * testsuite/gas/arm/align64.d: Likewise. * testsuite/gas/arm/arch7.d: Likewise. * testsuite/gas/arm/arch7a-mp.d: Likewise. * testsuite/gas/arm/arch7em.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/arm-it-auto-2.d: Likewise. * testsuite/gas/arm/arm-it-auto-3.d: Likewise. * testsuite/gas/arm/arm-it-auto.d: Likewise. * testsuite/gas/arm/arm-it-bad-2.d: Likewise. * testsuite/gas/arm/arm-it.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise. * testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise. * testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise. * testsuite/gas/arm/armv8-a+crypto.d: Likewise. * testsuite/gas/arm/armv8-a+fp.d: Likewise. * testsuite/gas/arm/armv8-a+ras.d: Likewise. * testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise. * testsuite/gas/arm/armv8-a+rdma.d: Likewise. * testsuite/gas/arm/armv8-a+simd.d: Likewise. * testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8-r+fp.d: Likewise. * testsuite/gas/arm/armv8-r+simd.d: Likewise. * testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise. * testsuite/gas/arm/armv8_1-a+simd.d: Likewise. * testsuite/gas/arm/armv8_2+rdma.d: Likewise. * testsuite/gas/arm/armv8_2-a.d: Likewise. * testsuite/gas/arm/armv8_3-a-fp.d: Likewise. * testsuite/gas/arm/armv8_3-a-simd.d: Likewise. * testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise. * testsuite/gas/arm/armv8a-automatic-lda.d: Likewise. * testsuite/gas/arm/attr-syntax.d: Likewise. * testsuite/gas/arm/automatic-bw.d: Likewise. * testsuite/gas/arm/automatic-cbz.d: Likewise. * testsuite/gas/arm/automatic-clrex.d: Likewise. * testsuite/gas/arm/automatic-lda.d: Likewise. * testsuite/gas/arm/automatic-ldaex.d: Likewise. * testsuite/gas/arm/automatic-ldaexb.d: Likewise. * testsuite/gas/arm/automatic-ldrex.d: Likewise. * testsuite/gas/arm/automatic-ldrexd.d: Likewise. * testsuite/gas/arm/automatic-movw.d: Likewise. * testsuite/gas/arm/automatic-sdiv.d: Likewise. * testsuite/gas/arm/automatic-strexb.d: Likewise. * testsuite/gas/arm/barrier-bad-thumb.d: Likewise. * testsuite/gas/arm/barrier-bad.d: Likewise. * testsuite/gas/arm/barrier-thumb.d: Likewise. * testsuite/gas/arm/barrier.d: Likewise. * testsuite/gas/arm/bignum1.d: Likewise. * testsuite/gas/arm/blx-bad.d: Likewise. * testsuite/gas/arm/blx-bl-convert.d: Likewise. * testsuite/gas/arm/blx-local.s: Likewise. * testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-a.d: Likewise. * testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise. * testsuite/gas/arm/crc32-armv8-r.d: Likewise. * testsuite/gas/arm/dis-data.d: Likewise. * testsuite/gas/arm/dis-data2.d: Likewise. * testsuite/gas/arm/dis-data3.d: Likewise. * testsuite/gas/arm/eabi_attr_1.d: Likewise. * testsuite/gas/arm/fp-save.d: Likewise. * testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-alu.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldc.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldr.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise. * testsuite/gas/arm/group-reloc-ldrs.d: Likewise. * testsuite/gas/arm/insn-error-a.d: Likewise. * testsuite/gas/arm/insn-error-t.d: Likewise. * testsuite/gas/arm/inst-po-2.d: Likewise. * testsuite/gas/arm/inst-po-3.d: Likewise. * testsuite/gas/arm/inst-po-be.d: Likewise. * testsuite/gas/arm/inst-po.d: Likewise. * testsuite/gas/arm/ldconst.d: Likewise. * testsuite/gas/arm/ldgesb-bad.d: Likewise. * testsuite/gas/arm/ldgesh-bad.d: Likewise. * testsuite/gas/arm/ldst-offset0.d: Likewise. * testsuite/gas/arm/local_function.d: Likewise. * testsuite/gas/arm/local_label_coff.d: Likewise. * testsuite/gas/arm/local_label_elf.d: Likewise. * testsuite/gas/arm/mapping.d: Likewise. * testsuite/gas/arm/mapping2.d: Likewise. * testsuite/gas/arm/mapping3.d: Likewise. * testsuite/gas/arm/mapping4.d: Likewise. * testsuite/gas/arm/mapshort-elf.d: Likewise. * testsuite/gas/arm/mask_1-armv8-a.d: Likewise. * testsuite/gas/arm/mask_1-armv8-r.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise. * testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise. * testsuite/gas/arm/movw-local.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise. * testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise. * testsuite/gas/arm/msr-imm-bad.d: Likewise. * testsuite/gas/arm/msr-reg-bad.d: Likewise. * testsuite/gas/arm/msr-reg-thumb.d: Likewise. * testsuite/gas/arm/nomapping.d: Likewise. * testsuite/gas/arm/nops.d: Likewise. * testsuite/gas/arm/pic.d: Likewise. * testsuite/gas/arm/pinsn.d: Likewise. * testsuite/gas/arm/plt-1.d: Likewise. * testsuite/gas/arm/pr21458.d: Likewise. * testsuite/gas/arm/pr9722.d: Likewise. * testsuite/gas/arm/strex-t.d: Likewise. * testsuite/gas/arm/t2-branch-global.d: Likewise. * testsuite/gas/arm/target-reloc-1.d: Likewise. * testsuite/gas/arm/thumb-b-bad.d: Likewise. * testsuite/gas/arm/thumb-w-bad.d: Likewise. * testsuite/gas/arm/thumb-w-good.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumb2_it.d: Likewise. * testsuite/gas/arm/thumb2_it_auto.d: Likewise. * testsuite/gas/arm/thumb2_it_search.d: Likewise. * testsuite/gas/arm/thumb2_ldmstm.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise. * testsuite/gas/arm/thumb2_pool.d: Likewise. * testsuite/gas/arm/thumb2_vpool.d: Likewise. * testsuite/gas/arm/thumb2_vpool_be.d: Likewise. * testsuite/gas/arm/thumb32.d: Likewise. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/arm/tls.d: Likewise. * testsuite/gas/arm/tls_vxworks.d: Likewise. * testsuite/gas/arm/undefined.d: Likewise. * testsuite/gas/arm/undefined_coff.d: Likewise. * testsuite/gas/arm/unwind.d: Likewise. * testsuite/gas/arm/v4bx.d: Likewise. * testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise. * testsuite/gas/arm/vcvt-bad.d: Likewise. * testsuite/gas/arm/vfma1.d: Likewise. * testsuite/gas/arm/vldconst.d: Likewise. * testsuite/gas/arm/vldconst_be.d: Likewise. * testsuite/gas/arm/vldm-arm.d: Likewise. * testsuite/gas/arm/vldr.d: Likewise. * testsuite/gas/arm/weakdef-1.d: Likewise. * testsuite/gas/arm/weakdef-2.d: Likewise. * config/te-riscix.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove arm-aout and arm-coff support. * configure.tgt: Likewise. * testsuite/ld-arm/attr-merge-div-00.d: Likewise. * testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-01.d: Likewise. * testsuite/ld-arm/attr-merge-div-02.d: Likewise. * testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise. * testsuite/ld-arm/attr-merge-div-10.d: Likewise. * testsuite/ld-arm/attr-merge-div-11.d: Likewise. * testsuite/ld-arm/attr-merge-div-12.d: Likewise. * testsuite/ld-arm/attr-merge-div-120.d: Likewise. * testsuite/ld-arm/attr-merge-div-20.d: Likewise. * testsuite/ld-arm/attr-merge-div-21.d: Likewise. * testsuite/ld-arm/attr-merge-div-22.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise. * testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise. * testsuite/ld-arm/attr-merge-nosection-1.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise. * testsuite/ld-arm/attr-merge-unknown-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9.d: Likewise. * testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-00.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-02.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-04.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-20.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-22.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-40.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise. * testsuite/ld-arm/attr-merge-wchar-44.d: Likewise. * testsuite/ld-arm/eabi-hard-float.d: Likewise. * testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise. * testsuite/ld-arm/eabi-soft-float-r.d: Likewise. * testsuite/ld-arm/eabi-soft-float.d: Likewise. * testsuite/ld-arm/gc-hidden-1.d: Likewise. * emulparams/armaoutb.sh: Delete. * emulparams/armaoutl.sh: Delete. * emulparams/armcoff.sh: Delete. * emulparams/armnbsd.sh: Delete. * emulparams/riscix.sh: Delete. * scripttempl/armaout.sc: Delete. * scripttempl/armcoff.sc: Delete. * scripttempl/riscix.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-19Reinstate mips ecoff supportAlan Modra1-0/+6
* Makefile.am: Revert 2018-04-18 coff-mips changes. * config.bfd: Add back mips_ecoff_le_vec and mips_ecoff_be_vec to selvecs for mips targets change 2018-04-18. * configure.ac: Reinstate mips_ecoff_le_vec, mips_ecoff_be_vec and mips_ecoff_bele_vec. * targets.c: Likewise. * coff-mips.c: Resurrect. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate.
2018-04-18Remove mips aout, coff, and pe supportAlan Modra1-17/+0
include/coff/mips.h needs to stay for ecoff debug support. include/ * coff/mipspe.h: Delete. bfd/ * Makefile.am: Remove mips aout, coff, and pe support. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-mips.c: Delete * mipsbsd.c: Delete * pe-mips.c: Delete * pei-mips.c: Delete * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate.
2018-04-18various i386-aout and i386-coff target removalAlan Modra1-21/+0
Also tidies some other aout leftovers in binutils-common.exp. bfd/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * targets.c: Likewise. * freebsd.h: Delete. * i386dynix.c: Delete. * i386freebsd.c: Delete. * i386linux.c: Delete. * i386mach3.c: Delete. * i386netbsd.c: Delete. * i386os9k.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/lib/binutils-common.exp: Remove support for assorted aout targets. gas/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * config/obj-elf.c: Likewise. * config/tc-i386.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * config/te-dynix.h: Delete. * config/te-i386aix.h: Delete. * config/te-mach.h: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. include/ * aout/dynix3.h: Delete. ld/ * Makefile.am: Remove support for assorted i386 aout and coff targets. * configure.tgt: Likewise. * testsuite/ld-discard/discard.exp: Likewise. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/tls.exp: Likewise. * testsuite/ld-elf/tls_common.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/abi-note.d: Likewise. * testsuite/ld-gc/pr19167.d: Likewise. * testsuite/ld-gc/pr20022.d: Likewise. * testsuite/ld-gc/start.d: Likewise. * testsuite/ld-gc/stop.d: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-linkonce/linkonce.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-scripts/empty-address-2a.d: Likewise. * testsuite/ld-scripts/empty-address-2b.d: Likewise. * testsuite/ld-scripts/phdrs2.exp: Likewise. * testsuite/ld-scripts/section-match-1.d: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-size/size.exp: Likewise. * testsuite/ld-sparc/sparc.exp: Likewise. * emulparams/i386coff.sh: Delete. * emulparams/i386linux.sh: Delete. * emulparams/i386mach.sh: Delete. * emulparams/i386nbsd.sh: Delete. * emulparams/vsta.sh: Delete. * scripttempl/i386coff.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
generated by cgit v1.1 at 2024-11-20 06:12:21 +0000