aboutsummaryrefslogtreecommitdiff
path: root/bfd/reloc.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-0/+24
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-11-25Pass section when available to bfd_octets_per_byteAlan Modra1-16/+13
and other tidies. I think it's better to default to passing the section to bfd_octets_per_byte, even in cases where we know it won't make a difference. A number of the coff reloc functions used bfd_octets_per_byte wrongly, not factoring it into the offset into the data buffer. As it happens, the targets using those files always had bfd_octets_per_byte equal to one, so there wasn't any detectable wrong behaviour. However, it is wrong in the source and might cause trouble for anyone creating a new target. Besides fixing that, the patch also defines OCTETS_PER_BYTE as one in target files where that is appropriate. bfd/ * archures.c (bfd_octets_per_byte): Tail call bfd_arch_mach_octets_per_byte. * coff-arm.c (OCTETS_PER_BYTE): Define. (coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE with section. Correct "addr". Remove ATTRIBUTE_UNUSED. * coff-i386.c (coff_i386_reloc): Similarly. * coff-mips.c (mips_reflo_reloc): Similarly. * coff-x86_64.c (coff_amd64_reloc): Similarly. * elf32-msp430.c (OCTETS_PER_BYTE): Define. (rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section. * elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly. * elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly. * elf32-s12z.c (opru18_reloc): Similarly. * elf32-sh.c (sh_elf_reloc): Similarly. * elf32-spu.c (spu_elf_rel9): Similarly. * elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly. * elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc), (ppc64_elf_toc64_reloc): Similarly. * bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte. * cofflink.c (_bfd_coff_link_input_bfd), (_bfd_coff_reloc_link_order): Likewise. * elf.c (_bfd_elf_section_offset): Likewise. * elflink.c (resolve_section, bfd_elf_perform_complex_relocation), (elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order), (bfd_elf_final_link): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice to set SEC_ELF_OCTETS. * reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case. (bfd_install_relocation): Likewise. (_bfd_final_link_relocate): Don't recalculate octets. * syms.c (_bfd_stab_section_find_nearest_line): Introduc new "octets" temp. * bfd-in2.h: Regenerate. ld/ * ldexp.c (fold_name): Pass section to bfd_octets_per_byte. * ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte unnecessarily.
2019-11-25Introduce new section flag: SEC_ELF_OCTETSChristian Eggers1-7/+25
All symbols, sizes and relocations in this section are octets instead of bytes. Required for DWARF debug sections as DWARF information is organized in octets, not bytes. bfd/ * section.c (struct bfd_section): New flag SEC_ELF_OCTETS. * archures.c (bfd_octets_per_byte): New parameter sec. If section is not NULL and SEC_ELF_OCTETS is set, one octet es returned [ELF targets only]. * bfd.c (bfd_get_section_limit): Provide section parameter to bfd_octets_per_byte. * bfd-in2.h: regenerate. * binary.c (binary_set_section_contents): Move call to bfd_octets_per_byte into section loop. Provide section parameter to bfd_octets_per_byte. * coff-arm.c (coff_arm_reloc): Provide section parameter to bfd_octets_per_byte. * coff-i386.c (coff_i386_reloc): likewise. * coff-mips.c (mips_reflo_reloc): likewise. * coff-x86_64.c (coff_amd64_reloc): likewise. * cofflink.c (_bfd_coff_link_input_bfd): likewise. (_bfd_coff_reloc_link_order): likewise. * elf.c (_bfd_elf_section_offset): likewise. (_bfd_elf_make_section_from_shdr): likewise. Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes, .debug*, .zdebug* and .note.gnu*. * elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter to bfd_octets_per_byte. * elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise. * elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise. * elf32-s12z.c (opru18_reloc): likewise. * elf32-sh.c (sh_elf_reloc): likewise. * elf32-spu.c (spu_elf_rel9): likewise. * elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise * elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise. (ppc64_elf_addr16_ha_reloc): likewise. (ppc64_elf_toc64_reloc): likewise. * elflink.c (bfd_elf_final_link): likewise. (bfd_elf_perform_complex_relocation): likewise. (elf_fixup_link_order): likewise. (elf_link_input_bfd): likewise. (elf_link_sort_relocs): likewise. (elf_reloc_link_order): likewise. (resolve_section): likewise. * linker.c (_bfd_generic_reloc_link_order): likewise. (bfd_generic_define_common_symbol): likewise. (default_data_link_order): likewise. (default_indirect_link_order): likewise. * srec.c (srec_set_section_contents): likewise. (srec_write_section): likewise. * syms.c (_bfd_stab_section_find_nearest_line): likewise. * reloc.c (_bfd_final_link_relocate): likewise. (bfd_generic_get_relocated_section_contents): likewise. (bfd_install_relocation): likewise. For section which have SEC_ELF_OCTETS set, multiply output_base and output_offset with bfd_octets_per_byte. (bfd_perform_relocation): likewise. include/ * coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN), (PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls. binutils/ * objdump.c (disassemble_data): Provide section parameter to bfd_octets_per_byte. (dump_section): likewise (dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set. gas/ * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str and .debug_ranges sections. * write.c (maybe_generate_build_notes): Set section flag SEC_OCTETS for .gnu.build.attributes section. * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if SEC_OCTETS is set. * symbols.c (resolve_symbol_value): Likewise. ld/ * ldexp.c (fold_name): Provide section parameter to bfd_octets_per_byte. * ldlang (init_opb): New argument s. Set opb_shift to 0 if SEC_ELF_OCTETS for the current section is set. (print_input_section): Pass current section to init_opb. (print_data_statement,print_reloc_statement, print_padding_statement): Likewise. (lang_check_section_addresses): Call init_opb for each section. (lang_size_sections_1,lang_size_sections_1, lang_do_assignments_1): Likewise. (lang_process): Pass NULL to init_opb.
2019-11-19PR25200, SIGSEGV in _bfd_elf_validate_relocAlan Modra1-22/+5
PR 25200 * reloc.c (bfd_default_reloc_type_lookup): Don't BFD_FAIL. * elf.c (_bfd_elf_validate_reloc): Don't segfault on NULL howto.
2019-11-07Remove CR16C supportAlan Modra1-82/+0
I think it is past time to remove CR16C support. CR16C was added in 2004, and only for ld. gas and binutils support is lacking, and there have been no commits to bfd/elf32-cr16c.c other than warning fixes or global maintainers making changes to all targets. I see no maintainer listed for CR16C, and no commits from anyone at NSC supporting the target. Furthermore, at the time the CR16 support was added in 2007, config.sub was changed upstream to no longer recognise cr16c as a valid cpu. That means the CR16C ld support is only available as a secondary target by configuring with, for example, --enable-targets=all or --enable-targets=cr16c-unknown-elf. No testing of the CR16C target is possible. include/ * elf/cr16c.h: Delete. bfd/ * cpu-cr16c.c: Delete. * elf32-cr16c.c: Delete. * Makefile.am, * archures.c, * config.bfd, * configure.ac, * reloc.c, * targets.c: Remove cr16c support. * Makefile.in, * bfd-in2.h, * configure, * libbfd.h, * po/SRC-POTFILES.in: Regenerate. ld/ * emulparams/elf32cr16c.sh: Delete. * scripttempl/elf32cr16c.sc: Delete. * Makefile.am, * configure.tgt: Remove cr16c support. * NEWS: Mention removal of cr16c. * Makefile.in, * po/BLD-POTFILES.in: Regenerate.
2019-09-19bfd_section_* macrosAlan Modra1-2/+1
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-09-18Constify target name, reloc name, and carsym nameAlan Modra1-1/+1
bfd/ * bfd-in.h (carsym.name): Make const. * reloc.c (struct reloc_howto_struct.name): Likewise. * targets.c (bfd_target.name): Likewise.! * bfd.c (bfd_get_sign_extend_vma): Make variable const. * som.c (som_bfd_fill_in_ar_symbols): Use an intermediary variable when setting carsym.name. * bfd-in2.h: Regenerate. gdb/ * amd64-dicos-tdep.c (amd64_dicos_osabi_sniffer): Constify target. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Likewise. * i386-dicos-tdep.c (i386_dicos_osabi_sniffer): Likewise. ld/ * ldlang.c (stricpy, strcut, name_compare): Constify params. (get_first_input_target): Make return and "target" const.
2019-07-19[PowerPC64] pc-relative TLS relocationsAlan Modra1-0/+14
This patch supports using pcrel instructions in TLS code sequences. A number of new relocations are needed, gas operand modifiers to generate those relocations, and new TLS optimisation. For optimisation it turns out that the new pcrel GD and LD sequences can be distinguished from the non-pcrel GD and LD sequences by there being different relocations on the new sequence. The final "add ra,rb,13" on IE sequences similarly needs a new relocation, or as I chose, a modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points one byte into the "add" instruction rather than being on the instruction boundary. GD: pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34 bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC edited to IE pld 3,z@got@tprel@pcrel add 3,3,13 edited to LE paddi 3,13,z@tprel nop LD: pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34 bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC .. paddi 9,3,z2@dtprel pld 10,z3@got@dtprel@pcrel add 10,10,3 edited to LE paddi 3,13,0x1000 nop IE: pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34 add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1 ldx 4,9,z@tls@pcrel lwax 5,9,z@tls@pcrel stdx 5,9,z@tls@pcrel edited to LE paddi 9,13,z@tprel nop ld 4,0(9) lwa 5,0(9) std 5,0(9) LE: paddi 10,13,z@tprel include/ * elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. (IS_PPC64_TLS_RELOC): Include new tls relocs. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34), (BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34), (BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34), (BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs. * elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs. (ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs. (must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64. (ppc64_elf_check_relocs): Support pcrel tls relocs. (ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". (fixup_size, md_assemble): Handle pcrel tls relocs. (ppc_force_relocation, ppc_fix_adjustable): Likewise. (md_apply_fix, tc_gen_reloc): Likewise. ld/ * testsuite/ld-powerpc/tlsgd.d, * testsuite/ld-powerpc/tlsgd.s, * testsuite/ld-powerpc/tlsie.d, * testsuite/ld-powerpc/tlsie.s, * testsuite/ld-powerpc/tlsld.d, * testsuite/ld-powerpc/tlsld.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-05-24PowerPC relocations for prefix insnsAlan Modra1-0/+34
include/ * elf/ppc64.h (R_PPC64_PLTSEQ_NOTOC, R_PPC64_PLTCALL_NOTOC), (R_PPC64_PCREL_OPT, R_PPC64_D34, R_PPC64_D34_LO, R_PPC64_D34_HI30), (R_PPC64_D34_HA30, R_PPC64_PCREL34, R_PPC64_GOT_PCREL34), (R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC), (R_PPC64_ADDR16_HIGHER34, R_PPC64_ADDR16_HIGHERA34), (R_PPC64_ADDR16_HIGHEST34, R_PPC64_ADDR16_HIGHESTA34), (R_PPC64_REL16_HIGHER34, R_PPC64_REL16_HIGHERA34), (R_PPC64_REL16_HIGHEST34, R_PPC64_REL16_HIGHESTA34), (R_PPC64_D28, R_PPC64_PCREL28): Define. bfd/ * reloc.c (BFD_RELOC_PPC64_D34, BFD_RELOC_PPC64_D34_LO), (BFD_RELOC_PPC64_D34_HI30, BFD_RELOC_PPC64_D34_HA30), (BFD_RELOC_PPC64_PCREL34, BFD_RELOC_PPC64_GOT_PCREL34), (BFD_RELOC_PPC64_PLT_PCREL34), (BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34), (BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34), (BFD_RELOC_PPC64_REL16_HIGHER34, BFD_RELOC_PPC64_REL16_HIGHERA34), (BFD_RELOC_PPC64_REL16_HIGHEST34, BFD_RELOC_PPC64_REL16_HIGHESTA34), (BFD_RELOC_PPC64_D28, BFD_RELOC_PPC64_PCREL28): New reloc enums. * elf64-ppc.c (PNOP): Define. (ppc64_elf_howto_raw): Add reloc howtos for new relocations. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc numbers. (ppc64_elf_ha_reloc): Adjust addend for highera34 and highesta34 relocs. (ppc64_elf_prefix_reloc): New function. (struct ppc_link_hash_table): Add notoc_plt. (is_branch_reloc): Add R_PPC64_PLTCALL_NOTOC. (is_plt_seq_reloc): Add R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC, and R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_check_relocs): Handle pcrel got and plt relocs. Set has_pltcall for section on seeing R_PPC64_PLTCALL_NOTOC. Handle possible need for dynamic relocs on non-pcrel powerxx relocs. (dec_dynrel_count): Handle non-pcrel powerxx relocs. (ppc64_elf_inline_plt): Handle R_PPC64_PLTCALL_NOTOC. (toc_adjusting_stub_needed): Likewise. (ppc64_elf_tls_optimize): Handle R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_relocate_section): Handle new powerxx relocs. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @pcrel, @got@pcrel, @plt@pcrel, @higher34, @highera34, @highest34, and @highesta34. (fixup_size): Handle new powerxx relocs. (md_assemble): Warn for @pcrel on non-prefix insns. Accept @l, @h and @ha on prefix insns, and infer reloc without any @ suffix. Translate powerxx relocs to suit DQ and DS field instructions. Include operand tests as well as opcode test to translate BFD_RELOC_HI16_S to BFD_RELOC_PPC_16DX_HA. (ppc_fix_adjustable): Return false for pcrel GOT and PLT relocs. (md_apply_fix): Handle new powerxx relocs. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Accept BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34, BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34, BFD_RELOC_PPC64_D34, and BFD_RELOC_PPC64_D28. * testsuite/gas/ppc/prefix-reloc.d, * testsuite/gas/ppc/prefix-reloc.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2019-05-23bfd: add support for eBPFJose E. Marchesi1-0/+13
This patch adds support to BFD for elf64-bpf, in both little-endian and big-endian variants. bfd/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Add bpf_elf64_le_vec and bpf_elf64_be_vec. * configure: Regenerated. * Makefile.am (ALL_MACHINES): Add cpu-bpf.lo. (ALL_MACHINES_CFILES): Add cpu-bpf.c. (BFD64_BACKENDS): Add elf64-bpf.lo. (BFD64_BACKENDS_CFILES): Add elf64-bpf.c. * Makefile.in (SOURCE_HFILES): Regenerate. * config.bfd (targ_cpu): Handle bpf-*-* targets. * cpu-bpf.c: New file. * elf64-bpf.c: Likewise. * targets.c (_bfd_target_vector): Add bpf_elf64_be_vec and bpf_elf64_le_vec. * archures.c: Define architecture bfd_arch_bpf and machine bfd_arch_bpf. * reloc.c: Define BFD relocations used by the BPF target. * bfd-in2.h: Regenerated. * libbfd.h: Likewise.
2019-05-06PowerPC reloc symbols that shouldn't be adjustedAlan Modra1-8/+8
GOT and PLT relocs shouldn't have their symbols replaced with a section symbol plus added. Nor should the HIGHA TLS relocations, which failed to be caught by the range test in ppc_fix_adjustable. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA), (BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): Sort before BFD_RELOC_PPC64_DTPREL16_HIGHESTA entry. gas/ * config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT relocs, and VLE sdarel relocs. * testsuite/gas/ppc/power4.d: Adjust.
2019-04-15[binutils, ARM, 16/16] Add support to VLDR and VSTR of system registersAndre Vieira1-0/+2
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case. Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg (). A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match. ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal relocation. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (parse_sys_vldr_vstr): New function. (OP_VLDR): New enum operand_parse_code enumerator. (parse_operands): Add logic for OP_VLDR. (do_t_vldr_vstr_sysreg): New function. (do_vldr_vstr): Likewise. (insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode. (md_apply_fix): Add bound check for VLDR and VSTR co-processor offset. Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad uses of VLDR and VSTR. * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for above bad uses. * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and VSTR valid uses. * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the above examples. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (coprocessor_opcodes): Document new %J and %K format specifier. Add entries for VLDR and VSTR of system registers. (print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in coprocessor instructions on Armv8.1-M Mainline targets. Add handling of %J and %K format specifier.
2019-04-15[binutils, ARM, 12/16] Scalar Low Overhead loop instructions for Armv8.1-M ↵Andre Vieira1-0/+5
Mainline s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds support to the Scalar low overhead loop instructions: LE WLS DLS We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions. ChangeLog entries are as follows: *** bfd/ChnageLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. *** gas/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR for the LR operand and optional LR operand. (parse_operands): Add switch cases for OP_LR and OP_oLR for both type checking and value checking. (encode_thumb32_addr_mode): New entries for DLS, WLS and LE. (v8_1_loop_reloc): New helper function for handling labels for the low overhead loop instructions. (do_t_loloop): New function to encode DLS, WLS and LE. (insns): New entries for WLS, DLS and LE. (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_LOOP12. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-tloop.s: New. * testsuite/gas/arm/armv8_1-m-tloop.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.s: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.d: New. * testsuite/gas/arm/armv8_1-m-tloop-bad.l: New. *** opcodes/ChangeLog *** 2019-04-12 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %P and %Q patterns.
2019-04-15[binutils, ARM, 11/16] New BFCSEL instruction for Armv8.1-M MainlineAndre Vieira1-0/+5
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum. ChangeLog entries are as follows: 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (T16_32_TAB): New entriy for bfcsel. (do_t_v8_1_branch): New switch case for bfcsel. (toU): Define. (insns): New instruction for bfcsel. (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BFCSEL. (md_appdy_fix): Likewise (tc_gen_reloc): Likewise. * testsuite/gas/arm/armv8_1-m-bfcsel.d: New. * testsuite/gas/arm/armv8_1-m-bfcsel.s: New. *** ld/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * testsuite/ld-arm/bfcsel.s: New. * testsuite/ld-arm/bfcsel.d: New. * testsuite/ld-arm/arm-elf.exp: Add above test. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (thumb32_opcodes): New instruction bfcsel. (print_insn_thumb32): Edit the switch case for %Z.
2019-04-15[binutils, ARM, 10/16] BFCSEL infrastructure with new global reloc ↵Andre Vieira1-0/+5
R_ARM_THM_BF12 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFCSEL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF12. The inconsistency between external R_ARM_THM_BF12 and internal BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : ChangeLog entries are as follows : *** bfd/ChnageLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF13): New. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13 and R_ARM_THM_BF12 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13. *** elfcpp/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF12): New relocation code. *** gas/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF13. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12. *** opcodes/ChangeLog *** 2019-04-04 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
2019-04-15[binutils, ARM, 8/16] BFL infrastructure with new global reloc R_ARM_THM_BF18Andre Vieira1-0/+5
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them. This adds a new relocation R_ARM_THM_BF18. The inconsistency between external R_ARM_THM_BF18 and internal BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF19): New * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19 and R_ARM_THM_BF18 together. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF18): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF19. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
2019-04-15[binutils, ARM, 5/16] BF insns infrastructure with new global reloc ↵Andre Vieira1-0/+5
R_ARM_THM_BF16 This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them. This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16. The inconsistency between external R_ARM_THM_BF16 and internal BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16. (elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17 and R_ARM_THM_BF16 together. (get_value_helper): New reloc helper. (elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16. *** elfcpp/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm.h (R_ARM_THM_BF16): New relocation code. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_ARM_THUMB_BF17. (md_appdy_fix): Likewise. (tc_gen_reloc): Likewise. *** include/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
2019-04-15[binutils, ARM, 3/16] BF insns infrastructure with new bfd_reloc_code_real ↵Andre Vieira1-0/+5
for fallback branch This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils. This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX, BFCSEL). These are the first instructions in ARM that have more than one relocations in them. This is the first infrastructure patch that adds a new bfd_reloc_code_real enum for the fallback branch offset. This is common for all such instructions and needs to be resolvable by the assembler. ChangeLog entries are as follows : *** bfd/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. *** gas/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (md_pcrel_from_section): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (v8_1_branch_value_check): New function to check branch offsets. (md_appdy_fix): New switch case for BFD_RELOC_THUMB_PCREL_BRANCH5. (tc_gen_reloc): Likewise. *** opcodes/ChangeLog *** 2019-04-15 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
2019-01-16S12Z: Emit RELOC_S12Z_OPR instead of RELOC_EXT24 where appropriate.John Darrington1-0/+5
When assembling instructions which involve OPR references, emit RELOC_S12Z_OPR instead of RELOC_EXT24. bfd/ * bfd-in2.h [BFD_RELOC_S12Z_OPR]: New reloc. * libbfd.h: regen. * elf32-s12z.c (eld_s12z_howto_table): R_S12Z_OPR takes non zero source field. (md_apply_fix): Apply final fix to BFD_RELOC_S12Z_OPR. * reloc.c[BFD_RELOC_S12Z_OPR]: New reloc. gas/ * config/tc-s12z.c (emit_opr): Emit BFD_RELOC_S12Z_OPR instead of BFD_RELOC_24. * testsuite/gas/s12z/opr-indirect-expr.d: Expect R_S12Z_OPR instead of R_S12Z_EXT24.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-10-13_bfd_clear_contents bounds checkingAlan Modra1-6/+13
This PR shows a fuzzed binary triggering a segfault via a bad relocation in .debug_line. It turns out that unlike normal relocations applied to a section, the linker applies those with symbols from discarded sections via _bfd_clear_contents without checking that the relocation is within the section bounds. The same thing now happens when reading debug sections since commit a4cd947aca23, the PR23425 fix. PR 23770 PR 23425 * reloc.c (_bfd_clear_contents): Replace "location" param with "buf" and "off". Bounds check "off". Return status. * cofflink.c (_bfd_coff_generic_relocate_section): Update _bfd_clear_contents call. * elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Likewise. * elf32-arc.c (elf_arc_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-metag.c (metag_final_link_relocate): Likewise. * elf32-nds32.c (nds32_elf_get_relocated_section_contents): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-visium.c (visium_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-x86-64.c *(elf_x86_64_relocate_section): Likewise. * libbfd-in.h (_bfd_clear_contents): Update prototype. * libbfd.h: Regenerate.
2018-10-05or1k: Add the l.adrp insn and supporting relocationsStafford Horne1-0/+24
This patch adds the new instruction and relocation as per proposal: https://openrisc.io/proposals/ladrp This is to be added to the spec in an upcoming revision. The new instruction l.adrp loads the page offset of the current instruction offset by a 21-bit immediate shifted left 13-bits. This is meant to be used with a 13-bit lower bit page offset. This allows us to free up the got register r16. l.adrp r3, foo l.ori r4, r3, po(foo) l.lbz r5, po(foo)(r3) l.sb po(foo)(r3), r6 The relocations we add are: - BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry asm: plta() implemented using l.ardp, meaning no need for r16 (the GOT reg) - BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address asm: got() - BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General asm: tlsgd() Dynamic calculation - BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local asm: tlsldm() dynamic calculation - BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial asm: gottp() Executable calculation - BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp instructions) - BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation asm: po() i.e. mem loads, addi etc - BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation asm: po() i.e. mem stores, with split immediate - BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs asm: gotpo() - BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs asm: tlsgdpo() - BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs asm: tlsldmpo() - BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs asm: gottppo() bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * bfd-in2.h: Regenerated. * elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. (or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26. (elf_or1k_link_hash_table): Add field saw_plta. (or1k_final_link_relocate): Add value calculations for new relocations. (or1k_elf_relocate_section): Add section relocations for new relocations. (or1k_write_plt_entry): New function. (or1k_elf_finish_dynamic_sections): Add support for PLTA relocations using new l.adrp instruction. Cleanup PLT relocation code generation. * libbfd.h: Regenerated. * reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13, BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc (parse_disp26): Add support for plta() relocations. (parse_disp21): New function. (or1k_rclass): New enum. (or1k_rtype): New enum. (or1k_imm16_relocs): Define new PO and SPO relocation mappings. (parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations. (parse_imm16): Add support for the new 21bit and 13bit relocations. * or1korbis.cpu (f-disp26): Don't assume SI. (f-disp21): New pc-relative 21-bit 13 shifted to right. (insn-opcode): Add ADRP. (l-adrp): New instruction. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21, BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21, BFD_RELOC_OR1K_TLS_IE_LO13. * testsuite/gas/or1k/allinsn.s: Add test for l.adrp. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions. * testsuite/gas/or1k/reloc-1.s: Add tests to generate R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13 relocations. * testsuite/gas/or1k/reloc-1.d: Add relocation results for tests. * testsuite/gas/or1k/reloc-2.s: Add negative tests for store to gotpo(). * testsuite/gas/or1k/reloc-2.l: Add expected error test results. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/or1k.exp: Add test cases for plt generation. * testsuite/ld-or1k/plt1.dd: New file. * testsuite/ld-or1k/plt1.s: New file. * testsuite/ld-or1k/plt1.x.dd: New file. * testsuite/ld-or1k/plta1.dd: New file. * testsuite/ld-or1k/plta1.s: New file. * testsuite/ld-or1k/pltlib.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerated. * or1k-desc.c: Regenerated. * or1k-desc.h: Regenerated. * or1k-dis.c: Regenerated. * or1k-ibld.c: Regenerated. * or1k-opc.c: Regenerated. * or1k-opc.h: Regenerated. * or1k-opinst.c: Regenerated.
2018-10-05or1k: Add relocations for high-signed and low-storesRichard Henderson1-3/+9
This patch adds the following target relocations: - BFD_RELOC_HI16_S High 16-bit relocation, for used with signed asm: ha() lower. - BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local asm: gotoffha() symbols, for use with signed lower. - BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial asm: gottpoffha() executable calculation, for use with signed lower. - BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable asm: tpoffha() variables, for use with signed lower. - BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with asm: lo() OpenRISC store instructions. - BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for asm: gotofflo() local symbols, used with OpenRISC store instructions. - BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local asm: tpofflo() executable variables, used with OpenRISC store instructions. bfd/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * bfd-in2.h: Regenerated. * elf32-or1k.c (N_ONES): New macro. (or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow. Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF, R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. (or1k_reloc_map): Add entries for BFD_RELOC_HI16_S, BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_LE_SLO16. (or1k_reloc_type_lookup): Change search loop to start ad index 0 and also check results before returning. (or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index limit. (or1k_final_link_relocate): New function. (or1k_elf_relocate_section): Add support for new AHI and SLO relocations. Use or1k_final_link_relocate instead of generic _bfd_final_link_relocate. (or1k_elf_check_relocs): Add support for new AHI and SLO relocations. * reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16, BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16 and BFD_RELOC_OR1K_GOTOFF_LO16. * libbfd.h: Regenerated. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k.opc: Add RTYPE_ enum. (INVALID_STORE_RELOC): New string. (or1k_imm16_relocs): New array array. (parse_reloc): New static function that just does the parsing. (parse_imm16): New static function for generic parsing. (parse_simm16): Change to just call parse_imm16. (parse_simm16_split): New function. (parse_uimm16): Change to call parse_imm16. (parse_uimm16_split): New function. * or1korbis.cpu (simm16-split): Change to use new simm16_split. (uimm16-split): Change to use new uimm16_split. gas/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation. * testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations. * testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp. * testsuite/gas/or1k/or1k.exp: Add reloc-2 list test. * testsuite/gas/or1k/reloc-1.d: New file. * testsuite/gas/or1k/reloc-1.s: New file. * testsuite/gas/or1k/reloc-2.l: New file. * testsuite/gas/or1k/reloc-2.s: New file. include/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16. ld/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * testsuite/ld-or1k/offsets1.d: New file. * testsuite/ld-or1k/offsets1.s: New file. * testsuite/ld-or1k/or1k.exp: New file. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> * or1k-asm.c: Regenerate.
2018-09-20Andes Technology has good news for you, we plan to update the nds32 port of ↵Nick Clifton1-7/+41
binutils on upstream! We have not only removed all unsupported and obsolete code, but also supported lost of new features, including better link-time relaxations and TLS implementations. Besides, the files generated by the newly assembler and linker usually get higher performance and more optimized code size. ld * emultempl/nds32elf.em (hyper_relax): New variable. (nds32_elf_create_output_section_statements): the parameters of bfd_elf32_nds32_set_target_option (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax. * emultempl/nds32elf.em (nds32_elf_after_open): Updated. * emultempl/nds32elf.em (tls_desc_trampoline): New variable. * (nds32_elf_create_output_section_statements): Updated. * (nds32_elf_after_parse): Disable relaxations when PIC is enable. * (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline. include * elf/nds32.h: Remove the unused target features. * dis-asm.h (disassemble_init_nds32): Declared. * elf/nds32.h (E_NDS32_NULL): Removed. (E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New. * opcode/nds32.h: Ident. (N32_SUB6, INSN_LW): New macros. (enum n32_opcodes): Updated. * elf/nds32.h: Doc fixes. * elf/nds32.h: Add R_NDS32_LSI. * elf/nds32.h: Add new relocations for TLS. gas * config/tc-nds32.c: Remove the unused target features. (nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp, nds32_set_elf_flags_by_insn, nds32_insert_relax_entry, nds32_apply_fix): Likewise. (nds32_no_ex9_begin): Removed. * config/tc-nds32.c (add_mapping_symbol_for_align, make_mapping_symbol, add_mapping_symbol): New functions. * config/tc-nds32.h (enum mstate): New. (nds32_segment_info_type): Likewise. * configure.ac (--enable-dsp-ext, --enable-zol-ext): New options. * config.in: Regenerated. * configure: Regenerated. * config/tc-nds32.c (nds32_dx_regs): Set the value according to the configuration. (nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext): Likewise. (nds32_dsp_ext): New variable. Set the value according to the configuration. (nds32_zol_ext): Likewise. (asm_desc, nds32_pseudo_opcode_table): Make them static. (nds32_set_elf_flags_by_insn): Updated. (nds32_check_insn_available): Updated. (nds32_str_tolower): New function. * config/tc-nds32.c (relax_table): Updated. (md_begin): Updated. (md_assemble): Use XNEW macro to allocate space for `insn.info', and then remember to free it. (md_section_align): Cast (-1) to ValueT. (nds32_get_align): Cast (~0U) to addressT. (nds32_relax_branch_instructions): Updated. (md_convert_frag): Add new local variable `final_r_type'. (invalid_prev_frag): Add new bfd_boolean parameter `relax'. All callers changed. * config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field. (struct nds32_hint_map): Add `option_list' field. (struct suffix_name, suffix_table): Remove the unused `pic' field. (do_pseudo_b, do_pseudo_bal): Remove the suffix checking. (do_pseudo_la_internal, do_pseudo_pushpopm): Indent. (relax_hint_bias, relax_hint_id_current): New static variables. (reset_bias, relax_hint_begin): New variables. (nds_itoa): New function. (CLEAN_REG, GET_OPCODE): New macros. (struct relax_hint_id): New. (nds32_relax_hint): For .relax_hint directive, we can use `begin' and `end' to mark the relax pattern without giving exactly id number. (nds32_elf_append_relax_relocs): Handle the case that the .relax_hint directives are attached to pseudo instruction. (nds32_elf_save_pseudo_pattern): Change the second parameter from instruction's opcode to byte code. (nds32_elf_build_relax_relation): Add new bfd_boolean parameter `pseudo_hint'. (nds32_lookup_pseudo_opcode): Fix the overflow issue. (enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT. (nds32_elf_record_fixup_exp, relax_ls_table, hint_map, nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name): Updated. * config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6. (enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and NDS32_RELAX_HINT_LA_GOTOFF. * config/tc-nds32.h (relax_ls_table): Add floating load/store to gp relax pattern. (hint_map, nds32_find_reloc_table): Likewise. * configure.ac: Define NDS32_LINUX_TOOLCHAIN. * configure: Regenerated. * config.in: Regenerated. * config/tc-nds32.h (enum nds32_ramp): Updated. (enum nds32_relax_hint_type): Likewise. * config/tc-nds32.c: Include "errno.h" and "limits.h". (relax_ls_table): Add TLS relax patterns. (nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on each instructions of TLS patterns. (nds32_elf_record_fixup_exp): Updated. (nds32_apply_fix): Likewise. (suffix_table): Add TLSDESC suffix. binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number from 215 to 255 for NDS32. bfd * elf32-nds32.c (nds32_elf_relax_loadstore): Remove the unused target features. (bfd_elf32_nds32_set_target_option): Remove the unused parameters. (nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12, nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls, nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff nds32_elf_relax_gotoff_suff, calculate_plt_memory_address, calculate_plt_offset, calculate_got_memory_address, nds32_elf_check_dup_relocs): Removed. All callers changed. * elf32-nds32.h: Remove the unused macros and defines. (elf_nds32_link_hash_table): Remove the unused variable. (bfd_elf32_nds32_set_target_option): Update prototype. (nds32_elf_ex9_init): Removed. * elf32-nds32.c (nds32_convert_32_to_16): Updated. * elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros to initialize array nds32_elf_howto_table in any order without lots of EMPTY_HOWTO. (nds32_reloc_map): Updated. * reloc.c: Add BFD_RELOC_NDS32_LSI. * bfd-in2.h: Regenerated. * bfd/libbfd.h: Regenerated. * elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI. (nds32_reloc_map): Likewise. (nds32_elf_relax_flsi): New function. (nds32_elf_relax_section): Support floating load/store relaxation. * elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset): New macro. (struct elf_nds32_link_hash_entry): New `offset_to_gp' field. (struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields. (elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard, nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym): New functions. (nds32_info_to_howto_rel): Add BFD_ASSERT. (bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc, nds32_elf_link_hash_table_create, nds32_elf_relocate_section, nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label, bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated. (nds32_elf_final_sda_base): Improve it to find the better gp value. (insert_nds32_elf_blank): Must consider `len' when inserting blanks. * elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype. (struct elf_nds32_link_hash_table): Add new variable `hyper_relax'. * elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function. (create_got_section): Likewise. (allocate_dynrelocs, nds32_elf_size_dynamic_sections, nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated. (nds32_elf_check_relocs): Fix the issue that the shared library may has TEXTREL entry in the dynamic section. (nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs since the TEXTREL issue is fixed in the nds32_elf_check_relocs. (nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ dynamic entry. (calculate_offset): Remove the unused parameter `pic_ext_target' and related codes. All callers changed. (elf_backend_dtrel_excludes_plt): Disable it temporarily since it will cause some errors for our test cases. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the generic object. * reloc.c: Add TLS relocations. * libbfd.h: Regenerated. * bfd-in2.h: Regenerated. * elf32-nds32.h (struct section_id_list_t): New. (elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New prototypes. (elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent): New macro. (nds32_insertion_sort, bfd_elf32_nds32_set_target_option, elf_nds32_link_hash_table): Updated. * elf32-nds32.c (enum elf_nds32_tls_type): New. (struct elf32_nds32_relax_group_t, struct relax_group_list_t): New. (elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type, fls, ones32, list_insert, list_insert_sibling, dump_chain, elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id, elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions. (elf_nds32_obj_tdata): Add new fields. (elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros. (nds32_elf_howto_table): Add TLS relocations. (nds32_reloc_map): Likewise. (nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections, nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info, nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option, nds32_elf_check_relocs, allocate_dynrelocs): Updated. (nds32_elf_relax_section): Call nds32_elf_unify_tls_model. (dtpoff_base): Rename it to `gottpof' and then update it. opcodes * nds32-asm.c (operand_fields): Remove the unused fields. (nds32_opcodes): Remove the unused instructions. * nds32-dis.c (nds32_ex9_info): Removed. (nds32_parse_opcode): Updated. (print_insn_nds32): Likewise. * nds32-asm.c (config.h, stdlib.h, string.h): New includes. (LEX_SET_FIELD, LEX_GET_FIELD): Update defines. (nds32_asm_init, build_operand_hash_table, build_keyword_hash_table, build_opcode_hash_table): New functions. (nds32_keyword_table, nds32_keyword_count_table, nds32_field_table, nds32_opcode_table): New. (hw_ktabs): Declare it to a pointer rather than an array. (build_hash_table): Removed. * nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT, SYN_ROPT and upadte HW_GPR and HW_INT. * nds32-dis.c (keywords): Remove const. (match_field): New function. (nds32_parse_opcode): Updated. * disassemble.c (disassemble_init_for_target): Add disassemble_init_nds32. * nds32-dis.c (eum map_type): New. (nds32_private_data): Likewise. (get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid, nds32_add_opcode_hash_table, disassemble_init_nds32): New functions. (print_insn_nds32): Updated. * nds32-asm.c (parse_aext_reg): Add new parameter. (parse_re, parse_re2, parse_aext_reg): Only reduced registers are allowed to use. All callers changed. * nds32-asm.c (keyword_usr, keyword_sr): Updated. (operand_fields): Add new fields. (nds32_opcodes): Add new instructions. (keyword_aridxi_mx): New keyword. * nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX and NASM_ATTR_ZOL. (ALU2_1, ALU2_2, ALU2_3): New macros. * nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-09-14PR23425, unresolved symbol diagnosticAlan Modra1-1/+12
dwarf2.c code reasonably assumes that debug info is local to a file, an assumption now violated by gcc, resulting in "DWARF error: invalid abstract instance DIE ref" or wrong details when attempting to print linker error messages with file, function and line reported. This is because find_abstract_instance is only prepared to handle DW_FORM_ref_addr when the .debug_info section referenced is in the current file. When that isn't the case, relocations to access another file's .debug_info will typically be against a symbol defined at the start of that .debug_info section, plus an addend. Since the dwarf2.c code only considers the current file's debug info, that symbol will be undefined, resolving to zero. In effect the ref_addr will wrongly resolve to the current file's .debug_info. This patch avoids the problem by treating relocations in debug sections against undefined symbols in a similar manner to the way relocations against symbols defined in discarded sections are resolved. They result in a zero value (except in .debug_ranges) regardless of the addend. PR 23425 * reloc.c (bfd_generic_get_relocated_section_contents): Zero reloc fields in debug sections when reloc is against an undefined symbol and called from bfd_simple_get_relocated_section_contents or similar. * dwarf2.c (find_abstract_instance): Return true for zero offset DW_FORM_ref_addr without returning values.
2018-08-31PowerPC64 higher REL16 relocationsAlan Modra1-0/+12
There are occasions where someone might want to build a 64-bit pc-relative offset from 16-bit pieces. This adds the necessary REL16 relocs corresponding to existing ADDR16 relocs that can be used to build 64-bit absolute values. include/ * elf/ppc64.h (R_PPC64_REL16_HIGH, R_PPC64_REL16_HIGHA), (R_PPC64_REL16_HIGHER, R_PPC64_REL16_HIGHERA), (R_PPC64_REL16_HIGHEST, R_PPC64_REL16_HIGHESTA): Define. (R_PPC64_LO_DS_OPT, R_PPC64_16DX_HA): Bump value. bfd/ * reloc.c (BFD_RELOC_PPC64_REL16_HIGH, BFD_RELOC_PPC64_REL16_HIGHA), (BFD_RELOC_PPC64_REL16_HIGHER, BFD_RELOC_PPC64_REL16_HIGHERA), (BFD_RELOC_PPC64_REL16_HIGHEST, BFD_RELOC_PPC64_REL16_HIGHESTA): Define. * elf64-ppc.c (ppc64_elf_howto_raw): Add new REL16 howtos. (ppc64_elf_reloc_type_lookup): Translate new REL16 relocs. (ppc64_elf_check_relocs, ppc64_elf_relocate_section): Handle them. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Allow ADDR16 HIGH, HIGHA, HIGHER, HIGHERA, HIGHEST, and HIGHESTA relocs. Group 16-bit relocs. * config/tc-ppc.c (md_apply_fix): Translate those ADDR16 relocs to REL16 when pcrel. Sort relocs.
2018-08-21Pack reloc_howto_structAlan Modra1-59/+51
This patch uses bitfields in reloc_howto_struct, reducing its size from 80 to 40 bytes on 64-bit hosts and from 52 to 32 bytes on 32-bit hosts (with a 32-bit bfd_vma). I've also added a new "negate" field rather than making the encoded "size" field do double duty as both a size and a flag. There was just one use of an encoded size of 8, which according to bfd_get_reloc_size meant 16 bytes, in vms-alpha.c ALPHA_R_LINKAGE. See git commit c3d8e071bf adding ALPHA_R_LINKAGE and git commit 8612a388f7 decoding size 8 in bfd_get_reloc_size. Since no other part of BFD handles 16 byte relocs, I've removed that encoding and special cased the ALPHA_R_LINKAGE size in vms-alpha.c. * reloc.c (reloc_howto_type): Typedef. (bfd_symbol): Delete forward declaration. (struct reloc_howto_struct): Add "negate" field. Make "size", "bitsize", "rightshift", "bitpos", "complain_on_overflow", "pc_relative", "partial_inplace", and "pcrel_offset" bitfields. Rearrange for better packing. Revise comments. (HOWTO): Map to rearranged reloc_howto_struct. (bfd_get_reloc_size): Delete now unused cases. (read_reloc, write_reloc): Likewise. (apply_reloc, _bfd_relocate_contents): Test howto->negate rather than howto->size < 0 for negated relocation values. * coff-rs6000.c (xcoff_complain_overflow_bitfield_func): Avoid signed/unsigned warning. (xcoff_ppc_relocate_section): Delete "condition is always false" code. * coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise. * cpu-ns32k.c (do_ns32k_reloc): Adjust to suit reloc_howto_struct changes. * vms-alpha.c (_bfd_vms_write_etir, alpha_vms_slurp_relocs): Use size 16 for ALPHA_R_LINKAGE. (alpha_howto_table <ALPHA_R_LINKAGE>): Set encoded size and bitsize to zero. * bfd-in.h (reloc_howto_type): Delete. * bfd-in2.h: Regenerate.
2018-08-21Delete NEWHOWTO and tidy some uses of reloc_howto_structAlan Modra1-29/+2
NEWHOWTO was promised way back in 1991 (git commit e5683622186). I doubt it's ever going to be implemented. This patch removes it, and tidies some reloc howtos. I was going to make some changes to reloc_howto_struct, so I think it's important that all relocs howtos are initialized with HOWTO. * reloc.c (HOWTO): Revise comment. (NEWHOWTO, HOWTO_PREPARE): Delete. * coff-arm.c (coff_arm_reloc_type_lookup): Replace const struc reloc_howto_struct with reloc_howto_type. * ns32knetbsd.c (MY_bfd_reloc_type_lookup): Likewise. * vms-alpha.c (alpha_vms_bfd_reloc_type_lookup): Likewise. * elf-hppa.h (HOW): Define. (elf_hppa_howto_table): Use it to simplify this table, correcting name of R_PARISC_LTOFF16WF, R_PARISC_LTOFF_FPTR64, and R_PARISC_LTOFF_FPTR16DF. * elf32-mep.c (MEPREL): Use HOWTO. * bfd-in2.h: Regenerate.
2018-08-11Factor out common relocation processingAlan Modra1-244/+108
This patch factors out some code common to both bfd_perform_relocation and bfd_install_relocation, in the process fixing the omission of "case -1" in bfd_install_relocation. * reloc.c (bfd_get_reloc_size): Sort switch. (read_reloc, write_reloc, apply_reloc): New functions. (bfd_perform_relocation, bfd_install_relocation): Use apply_reloc. (_bfd_relocate_contents): Use read_reloc and write_reloc. (_bfd_clear_contents): Likewise.
2018-08-11Deal with relocations which are 3 bytes in sizeJohn Darrington1-4/+21
* reloc.c (_bfd_relocate_contents): Handle 3 byte relocs. (_bfd_clear_contents): Likewise. (bfd_perform_relocation): Likewise. (bfd_install_relocation): Likewise.
2018-08-05R_PPC64_REL24_NOTOC supportAlan Modra1-0/+2
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+133
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-06-18Add support for the TLV relocation generated by LLVM for x86_64 MACH-O targets.Mephi1-0/+4
PR 23297 * mach-o-x86-64.c (x86_64_howto_table): Add entry for BFD_RELOC_MACH_O_X86_64_RELOC_TLV. (bfd_mach_o_x86_64_canonicalize_one_reloc): Handle the new reloc. (bfd_mach_o_x86_64_swap_reloc_out): Likewise. * reloc.c (BFD_RELOC_MACH_O_X86_64_TV): New entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+17
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-04-25[ARM] Add TLS relocations for FDPIC.Christophe Lyon1-0/+6
Define and handle TLS relocations for FDPIC in BFD and gas. In gas, the new relocations are rejected if the --fdpic option was not specified. We also define the __tdata_start symbol to mark the start of the .tdata section. This allows FDPIC static binaries to find the start of .tdata section, since phdr->p_vaddr of TLS segment is not a valid value for FDPIC. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/: * bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC) (BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New relocations. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations. (elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. (struct elf32_arm_link_hash_table): Update comment. (elf32_arm_final_link_relocate): Handle TLS FDPIC relocations. (IS_ARM_TLS_RELOC): Likewise. (elf32_arm_check_relocs): Likewise. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_size_dynamic_sections): Update comment. * reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC, BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC. gas/ * config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC, GOTTPOFF_FDIC relocations. (md_apply_fix): Handle the new TLS FDPIC relocations. (tc_gen_reloc): Likewise. (arm_fix_adjustable): Likewise. include/ * elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC. ld/ * scripttempl/elf.sc: Define __tdata_start for .tdata section.
2018-04-25[ARM] Add FDPIC relocations definitionsChristophe Lyon1-0/+11
Add FDPIC relocation definitions in BFD and gas. Gas rejects them if the --fdpic option was not specified. 2018-04-25 Christophe Lyon <christophe.lyon@st.com> Mickaël Guêné <mickael.guene@st.com> bfd/ * bfd-in2.c (BFD_RELOC_ARM_GOTFUNCDESC) (BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC) (BFD_RELOC_ARM_FUNCDESC_VALUE): New. * elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC, R_ARM_FUNCDESC, R_ARM_FUNCDESC_VALUE. (elf32_arm_howto_from_type): Take new members of elf32_arm_howto_table_2 into account. (elf32_arm_reloc_map): Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. * reloc.c: Add BFD_RELOC_ARM_GOTFUNCDESC, BFD_RELOC_ARM_GOTOFFFUNCDESC, BFD_RELOC_ARM_FUNCDESC, BFD_RELOC_ARM_FUNCDESC_VALUE. gas/ * config/tc-arm.c (reloc_names): Add gotfuncdesc, gotofffuncdesc, funcdesc. (md_apply_fix): Support the new relocations. (tc_gen_reloc): Likewise. * testsuite/gas/arm/reloc-fdpic.d: New. * testsuite/gas/arm/reloc-fdpic.s: New. include/ * elf/arm.h (R_ARM_GOTFUNCDESC, R_ARM_GOTOFFFUNCDESC) (R_ARM_FUNCDESC) (R_ARM_FUNCDESC_VALUE): Define new relocations.
2018-04-17[MicroBlaze] PIC data text relativeMichael Eager1-0/+12
Andrew Sadek <andrew.sadek.se@gmail.com> A new implemented feature in GCC Microblaze that allows Position Independent Code to run using Data Text Relative addressing instead of using Global Offset Table. Its aim was to make 'PIC' more efficient and flexible as elf size excess performance overhead were noticed when using GOT due to the indirect addressing. include/ChangeLog: * bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct. * elf/microblaze.h (Add 3 new relocations): R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64 and R_MICROBLAZE_TEXTREL_32_LO for relax function. bfd/ChangeLog: * bfd/reloc.c (2 new BFD relocations): BFD_RELOC_MICROBLAZE_64_TEXTPCREL & BFD_RELOC_MICROBLAZE_64_TEXTPCREL * bfd/bfd-in2.h: Regenerate * bfd/libbfd.h: Regenerate * bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3 new relocs and handle them in both relocate and relax functions. (microblaze_elf_reloc_type_lookup): add mapping between for new bfd relocs. (microblaze_elf_relocate_section): Handle new relocs in case of elf relocation. (microblaze_elf_relax_section): Handle new relocs for elf relaxation. gas/ChangeLog: * gas/config/tc-microblaze.c (Handle new relocs directives in assembler): Handle new relocs from compiler output. (imm_types): add new imm types for data text relative addressing TEXT_OFFSET, TEXT_PC_OFFSET (md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_estimate_size_before_relax): estimate size for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (tc_gen_reloc): generate relocations for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL ld/ChangeLog: * ld/lexsup.c (Add 2 ld options): (ld_options): add disable-multiple-abs-defs @ 'ld_options' array (parse_args): parse new option and pass flag to 'link_info' struct. * ld/ldlex.h (Add enum): add new enum @ 'option_values' enum. * ld/ld.texinfo (Add new option): Add description for 'disable-multiple-abs-defs' * ld/main.c: Initialize flags with false @ 'main'. Handle disable-multiple-abs-defs @ 'mutiple_definition'.
2018-04-16Remove m88k supportAlan Modra1-10/+10
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-80/+4
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-03-28[1/2][GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSLE_LDST8/16/32/64_TPREL_LO12 ↵Renlin Li1-0/+46
support in GAS. This patch adds the following relocation support into binutils gas. BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC. Those relocations includes both ip64 and ilp32 variant.
2018-02-26BFD messagesAlan Modra1-2/+2
bfd/ * archive.c, * bfd.c, * linker.c, * reloc.c, * stabs.c, * syms.c: Standardize error/warning messages. binutils/ * testsuite/binutils-all/mips/mips-reginfo-n32.d, * testsuite/binutils-all/mips/mips-reginfo.d: Update. gas/ * testsuite/gas/mips/reginfo-2.l: Update. ld/ * testsuite/ld-arm/cmse-implib-errors.out, * testsuite/ld-arm/cmse-new-earlier-later-implib.out, * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out, * testsuite/ld-arm/cmse-new-wrong-implib.out, * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out, * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out, * testsuite/ld-cris/badgotr1.d, * testsuite/ld-cris/tls-err-24.d, * testsuite/ld-cris/tls-err-25.d, * testsuite/ld-cris/tls-err-26.d, * testsuite/ld-cris/tls-err-27.d, * testsuite/ld-cris/tls-err-28.d, * testsuite/ld-cris/tls-err-40.d, * testsuite/ld-cris/tls-err-44.d, * testsuite/ld-cris/tls-err-48.d, * testsuite/ld-cris/tls-err-52.d, * testsuite/ld-cris/tls-err-53.d, * testsuite/ld-cris/tls-err-55.d, * testsuite/ld-cris/tls-err-56.d, * testsuite/ld-cris/tls-err-62.d, * testsuite/ld-cris/tls-err-65.d, * testsuite/ld-cris/tls-err-77.d, * testsuite/ld-elf/empty-implib.out, * testsuite/ld-elf/indirect.exp: Update.
2018-02-26unrecognized/unsupported reloc messageAlan Modra1-1/+1
It must get boring translating all the variants we have of unrecognized/unsupported/invalid/unexpected reloc number. This patch cuts down on the number of variations. * aoutx.h, * coff-alpha.c, * coff-i860.c, * coff-m68k.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-w65.c, * elf-bfd.h, * elf-m10300.c, * elf.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-i370.c, * elf32-i386.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c, * elf32-xgate.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-riscv.h, * elfxx-sparc.c, * elfxx-sparc.h, * reloc.c: Standardize unrecognized/unsupported reloc message.
2018-02-19Use %pI, %pR, %pS, %pT in place of %I, %R, %S and %T.Alan Modra1-3/+3
bfd/ * elf32-arm.c, * elf32-hppa.c, * elf32-lm32.c, * elf32-m32r.c, * elf32-metag.c, * elf32-nds32.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-s390.c, * elf32-sh.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf64-ppc.c, * elf64-s390.c, * elflink.c, * elfnn-aarch64.c, * elfnn-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * reloc.c: Replace use of %R and %T in format strings passed to einfo and friends by %pR and %pT. ld/ * ldmisc.c (vfinfo) Handle %pI, %pR, %pS and %pT in place of %I, %R, %S and %T. * ldcref.c, * ldctor.c, * ldemul.c, * ldexp.c, * ldgram.y, * ldlang.c, * ldlex.l, * ldmain.c, * ldmisc.c, * pe-dll.c, * emultempl/sh64elf.em: Replace use of of %I, %R, %S and %T in format strings passed to einfo and friends by %pI, %pR, %pS and %pT.
2018-02-19Use %pA and %pB in messages rather than %A and %BAlan Modra1-5/+5
First step towards compiler verification of _bfd_error_handler arguments, and better verification of translated messages. bfd/ * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Handle %pA and %pB in place of %A and %B. * aout-adobe.c: Update all messages using %A and %B. * aout-cris.c: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * compress.c: Likewise. * cpu-arm.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-properties.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-sparc.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-wasm32.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfnn-riscv.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.c: Likewise. * hpux-core.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * peicode.h: Likewise. * reloc.c: Likewise. * rs6000-core.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * xcofflink.c: Likewise. ld/ * ldmisc.c (vfinfo): Handle %pA and %pB in place of %A and %B. * ldcref.c: Update all messages using %A and %B. * ldexp.c: Likewise. * ldlang.c: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * emultempl/beos.em: Likewise. * emultempl/cr16elf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/m68kcoff.em: Likewise. * emultempl/m68kelf.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/nds32elf.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/sunos.em: Likewise. * emultempl/xtensaelf.em: Likewise.
2018-02-16Remove bfd stub function casts.Alan Modra1-0/+23
This patch defines a bunch of new functions to use in the BFD target structs rather than casting bfd_false or bfd_true and similar stub functions. I've also renamed the stub functions to reflect their parameters and put "error" in the name if they set bfd_error. The latter change is important since there were quite a few uses of bfd_false where setting bfd_error was inappropriate, for example in elf_backend_allow_non_load_phdr and is_target_special_symbol. * libbfd.c (_bfd_bool_bfd_false_error): Rename from bfd_false. (_bfd_bool_bfd_true): Rename from bfd_true. (_bfd_ptr_bfd_null_error): Rename from bfd_nullvoidptr. (_bfd_int_bfd_0): Rename from bfd_0. (_bfd_uint_bfd_0): Rename from bfd_0u. (_bfd_long_bfd_0): Rename from bfd_0l. (_bfd_long_bfd_n1_error): Rename from _bfd_n1. (_bfd_void_bfd): Rename from bfd_void. (_bfd_bool_bfd_false, _bfd_bool_bfd_asymbol_false), (_bfd_bool_bfd_link_false_error), (_bfd_bool_bfd_link_true, _bfd_bool_bfd_bfd_true), (_bfd_bool_bfd_uint_true, _bfd_bool_bfd_ptr_true), (_bfd_bool_bfd_asection_bfd_asection_true), (_bfd_bool_bfd_asymbol_bfd_asymbol_true), (_bfd_void_bfd_link, _bfd_void_bfd_asection): New functions. * archive.c (_bfd_noarchive_get_elt_at_index), (_bfd_noarchive_openr_next_archived_file), (_bfd_noarchive_construct_extended_name_table), (_bfd_noarchive_write_ar_hdr, _bfd_noarchive_truncate_arname), (_bfd_noarchive_write_armap): New functions. * archures.c (_bfd_nowrite_set_arch_mach): New function. * coff-alpha.c (alpha_ecoff_swap_coff_aux_in), (alpha_ecoff_swap_coff_sym_in, alpha_ecoff_swap_coff_lineno_in), (alpha_ecoff_swap_coff_aux_out, alpha_ecoff_swap_coff_sym_out), (alpha_ecoff_swap_coff_lineno_out), (alpha_ecoff_swap_coff_reloc_out): New functions. * coff-mips.c (mips_ecoff_swap_coff_aux_in), (mips_ecoff_swap_coff_sym_in, mips_ecoff_swap_coff_lineno_in), (mips_ecoff_swap_coff_aux_out, mips_ecoff_swap_coff_sym_out), (mips_ecoff_swap_coff_lineno_out), (mips_ecoff_swap_coff_reloc_out): New functions. * coffcode.h (coff_set_alignment_hook): Replace define with new function. (symname_in_debug_hook): Likewise. * ecoff.c (_bfd_ecoff_set_alignment_hook): New function. * elfxx-target.h (elf_backend_allow_non_load_phdr): Default to 0. * elf.c (assign_file_positions_except_relocs): Test elf_backend_allow_non_load_phdr for NULL. * elflink.c (_bfd_elf_omit_section_dynsym_default): Rename from _bfd_elf_link_omit_section_dynsym. Update uses. (_bfd_elf_omit_section_dynsym_all): New function. * elf-bfd.h (_bfd_elf_link_omit_section_dynsym): Delete. (_bfd_elf_omit_section_dynsym_default): Declare. (_bfd_elf_omit_section_dynsym_all): Declare. * linker.c (_bfd_nolink_sizeof_headers, _bfd_nolink_bfd_relax_section), (_bfd_nolink_bfd_get_relocated_section_contents), (_bfd_nolink_bfd_lookup_section_flags), (_bfd_nolink_bfd_is_group_section, _bfd_nolink_bfd_discard_group), (_bfd_nolink_bfd_link_hash_table_create), (_bfd_nolink_bfd_link_just_syms), (_bfd_nolink_bfd_copy_link_hash_symbol_type), (_bfd_nolink_bfd_link_split_section), (_bfd_nolink_section_already_linked), (_bfd_nolink_bfd_define_common_symbol), (_bfd_nolink_bfd_define_start_stop): New functions. * reloc.c (_bfd_norelocs_bfd_reloc_type_lookup), (_bfd_norelocs_bfd_reloc_name_lookup), (_bfd_nodynamic_canonicalize_dynamic_reloc): New functions. * section.c (_bfd_nowrite_set_section_contents): New function. * syms.c (_bfd_nosymbols_canonicalize_symtab), (_bfd_nosymbols_print_symbol, _bfd_nosymbols_get_symbol_info), (_bfd_nosymbols_get_symbol_version_string), (_bfd_nosymbols_bfd_is_local_label_name), (_bfd_nosymbols_get_lineno, _bfd_nosymbols_find_nearest_line), (_bfd_nosymbols_find_line, _bfd_nosymbols_find_inliner_info), (_bfd_nosymbols_bfd_make_debug_symbol), ( _bfd_nosymbols_read_minisymbols), ( _bfd_nosymbols_minisymbol_to_symbol), (_bfd_nodynamic_get_synthetic_symtab): New functions. * libbfd-in.h: Declare new functions. Update existing defines, removing casts. * aix386-core.c: Update to use new hooks. Formatting. * aout-adobe.c: Likewise. * aout-arm.c: Likewise. * aout-target.h: Likewise. * aout-tic30.c: Likewise. * aoutf1.h: Likewise. * binary.c: Likewise. * bout.c: Likewise. * cisco-core.c: Likewise. * coff-alpha.c: Likewise. * coff-i386.c: Likewise. * coff-i860.c: Likewise. * coff-i960.c: Likewise. * coff-ia64.c: Likewise. * coff-mips.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic30.c: Likewise. * coff-tic54x.c: Likewise. * coff-x86_64.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * elf-m10300.c: Likewise. * elf32-cr16.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32r.c: Likewise. * elf32-metag.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-xstormy16.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-sh64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-target.h: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.h: Likewise. * hp300hpux.c: Likewise. * hppabsd-core.c: Likewise. * hpux-core.c: Likewise. * i386msdos.c: Likewise. * i386os9k.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * irix-core.c: Likewise. * libaout.h: Likewise. * libecoff.h: Likewise. * mach-o-target.c: Likewise. * mach-o.c: Likewise. * mipsbsd.c: Likewise. * mmo.c: Likewise. * netbsd-core.c: Likewise. * nlm-target.h: Likewise. * oasys.c: Likewise. * osf-core.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * pe-x86_64.c: Likewise. * pef.c: Likewise. * plugin.c: Likewise. * ppcboot.c: Likewise. * ptrace-core.c: Likewise. * sco5-core.c: Likewise. * som.c: Likewise. * sparclynx.c: Likewise. * srec.c: Likewise. * tekhex.c: Likewise. * trad-core.c: Likewise. * verilog.c: Likewise. * versados.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * wasm-module.c: Likewise. * xsym.c: Likewise. * libbfd.h: Regenerate.
2018-01-24[GAS][AARCH64]Add group relocations to create PC-relative offset.Renlin Li1-0/+37
This is a patch to add the gas support for group relocations to create a 16, 32, 48, or 64 bit PC-relative offset inline. The following relocations are added along with the test cases: BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. bfd/ 2018-01-24 Renlin Li <renlin.li@arm.com> * reloc.c: Add BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. gas/ 2018-01-24 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. (process_movw_reloc_info): Supports newly added MOVW_PREL relocations. (md_apply_fix): Likewise * testsuite/gas/aarch64/prel_g0.s: New. * testsuite/gas/aarch64/prel_g0.d: New. * testsuite/gas/aarch64/prel_g0_nc.s: New. * testsuite/gas/aarch64/prel_g0_nc.d: New. * testsuite/gas/aarch64/prel_g1.s: New. * testsuite/gas/aarch64/prel_g1.d: New. * testsuite/gas/aarch64/prel_g1_nc.s: New. * testsuite/gas/aarch64/prel_g1_nc.d: New. * testsuite/gas/aarch64/prel_g2.s: New. * testsuite/gas/aarch64/prel_g2.d: New. * testsuite/gas/aarch64/prel_g2_nc.s: New. * testsuite/gas/aarch64/prel_g2_nc.d: New. * testsuite/gas/aarch64/prel_g3.s: New. * testsuite/gas/aarch64/prel_g3.d: New.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-06BFD whitespace fixesAlan Modra1-136/+136
Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
2017-11-28Fix a memory access violation when attempting to parse a corrupt COFF binary ↵users/ARM/embedded-gdb-master-2017q4users/ARM/embedded-binutils-master-2017q4Nick Clifton1-6/+34
with a relocation that points beyond the end of the section to be relocated. PR 22506 * reloc.c (reloc_offset_in_range): Rename to bfd_reloc_offset_in_range and export. (bfd_perform_relocation): Rename function invocation. (bfd_install_relocation): Likewise. (bfd_final_link_relocate): Likewise. * bfd-in2.h: Regenerate. * coff-arm.c (coff_arm_reloc): Use bfd_reloc_offset_in_range. * coff-i386.c (coff_i386_reloc): Likewise. * coff-i860.c (coff_i860_reloc): Likewise. * coff-m68k.c (mk68kcoff_common_addend_special_fn): Likewise. * coff-m88k.c (m88k_special_reloc): Likewise. * coff-mips.c (mips_reflo_reloc): Likewise. * coff-x86_64.c (coff_amd64_reloc): Likewise.
generated by cgit v1.1 at 2024-12-20 08:22:33 +0000