| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This parameter might appear to be used to set up offset_size, but
since git commit 024b2372f5 offset_size is either set from the
debug_info data or is set to 4.
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Remove addr_size parameter.
* libbfd-in.h (_bfd_dwarf2_find_nearest_line): Update prototype.
* coffgen.c (coff_find_nearest_line_with_names): Adjust
_bfd_dwarf2_find_nearest_line calls.
* elf.c (_bfd_elf_find_nearest_line, _bfd_elf_find_line): Likewise.
* elf32-arm.c (elf32_arm_find_nearest_line): Likewise.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_find_nearest_line): Likewise.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise.
* mach-o.c (bfd_mach_o_find_nearest_line): Likewise.
* libbfd.h: Regenerate.
|
|
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
|
|
emaulation for 64-bit objects.
PR 24832
* elfxx-mips.c (mips_set_isa_flags): Default to MIPS 3 for 64-bit
mips inputs.
|
|
It's not as good as complaining in gas/config/obj-elf.c since you lose
any reference to the source file.
bfd/
* elf-bfd.h (struct elf_backend_data): Return bfd_boolean from
elf_backend_final_write_processing, don't pass linker arg.
(_bfd_elf_final_write_processing): Update prototype.
* elf.c (_bfd_elf_write_object_contents): Adjust call.
(_bfd_elf_final_write_processing): Return error on incompatible
OSABI and has_gnu_osabi. Remove linker arg.
* elf-nacl.h (nacl_final_write_processing): Update prototype.
* elf-vxworks.h (elf_vxworks_final_write_processing): Likewise.
* elfxx-mips.h (_bfd_mips_final_write_processing): Likewise.
(_bfd_mips_elf_final_write_processing): Likewise.
* elf-hppa.h (elf_hppa_final_write_processing): Return status
and remove linker arg.
* elf-m10300.c (_bfd_mn10300_elf_final_write_processing): Likewise.
* elf-nacl.c (nacl_final_write_processing): Likewise.
* elf-vxworks.c (elf_vxworks_final_write_processing): Likewise.
* elf32-arc.c (arc_elf_final_write_processing): Likewise.
* elf32-arm.c (arm_final_write_processing): Likewise.
(elf32_arm_final_write_processing): Likewise.
(elf32_arm_nacl_final_write_processing): Likewise.
(elf32_arm_vxworks_final_write_processing): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
* elf32-bfin.c (elf32_bfin_final_write_processing): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_final_write_processing): Likewise.
* elf32-cris.c (cris_elf_final_write_processing): Likewise.
* elf32-h8300.c (elf32_h8_final_write_processing): Likewise.
* elf32-lm32.c (lm32_elf_final_write_processing): Likewise.
* elf32-m32r.c (m32r_elf_final_write_processing): Likewise.
* elf32-m68k.c (elf_m68k_final_write_processing): Likewise.
* elf32-mips.c (mips_vxworks_final_write_processing): Likewise.
* elf32-msp430.c (bfd_elf_msp430_final_write_processing): Likewise.
* elf32-nds32.c (nds32_elf_final_write_processing): Likewise.
* elf32-or1k.c (or1k_elf_final_write_processing): Likewise.
* elf32-pj.c (pj_elf_final_write_processing): Likewise.
* elf32-ppc.c (ppc_final_write_processing): Likewise.
(ppc_elf_final_write_processing): Likewise.
(ppc_elf_vxworks_final_write_processing): Likewise.
* elf32-sparc.c (sparc_final_write_processing): Likewise.
(elf32_sparc_final_write_processing): Likewise.
(elf32_sparc_vxworks_final_write_processing): Likewise.
* elf32-v850.c (v850_elf_final_write_processing): Likewise.
* elf32-xc16x.c (elf32_xc16x_final_write_processing): Likewise.
* elf32-xtensa.c (elf_xtensa_final_write_processing): Likewise.
* elf64-ia64-vms.c (elf64_vms_final_write_processing): Likewise.
* elfnn-ia64.c (elfNN_ia64_final_write_processing): Likewise.
* elfxx-mips.c (_bfd_mips_final_write_processing): Likewise.
(_bfd_mips_elf_final_write_processing): Likewise.
gas/
* config/obj-elf.c (obj_elf_section, obj_elf_type): Set has_gnu_osabi.
* testsuite/gas/elf/section12a.d: Update xfails.
* testsuite/gas/elf/section12b.d: Likewise.
|
|
Move setting of OSABI to final_write_processing, after symbols are
written. This allows OSABI to be set based on symbols actually
written to the output rather than assuming input symbols will be
output.
Corrects object files such as the one generated on powerpc64le-linux
by ld-powerpc/pr23927.s which has a local STT_GNU_IFUNC symbol but
prior to this patch the file was marked ELFOSABI_NONE.
* elf-bfd.h (enum elf_gnu_osabi): Rename from elf_gnu_symbols.
Remove none, any, all enums.
(struct elf_obj_tdata): Rename has_gnu_symbols field to has_gnu_osabi.
(_bfd_elf_final_write_processing): Declare.
* elf.c (_bfd_elf_write_object_contents): Unconditionally call
elf_backend_final_write_processing.
(_bfd_elf_post_process_headers): Move body of function to..
(_bfd_elf_final_write_processing): ..here, but set EI_OSABI byte
only when not already set. Adjust for rename.
* elfxx-target.h (elf_backend_final_write_processing): Default to
_bfd_elf_final_write_processing.
* elf-hppa.h (elf_hppa_final_write_processing): Call
_bfd_elf_final_write_processing.
* elf-m10300.c (_bfd_mn10300_elf_final_write_processing): Likewise.
* elf-nacl.c (nacl_final_write_processing): Likewise.
* elf-vxworks.c (elf_vxworks_final_write_processing): Likewise.
* elf32-arc.c (arc_elf_final_write_processing): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
* elf32-bfin.c (elf32_bfin_final_write_processing): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_final_write_processing): Likewise.
* elf32-cris.c (cris_elf_final_write_processing): Likewise.
* elf32-h8300.c (elf32_h8_final_write_processing): Likewise.
* elf32-lm32.c (lm32_elf_final_write_processing): Likewise.
* elf32-m32r.c (m32r_elf_final_write_processing): Likewise.
* elf32-m68k.c (elf_m68k_final_write_processing): Likewise.
* elf32-msp430.c (bfd_elf_msp430_final_write_processing): Likewise.
* elf32-nds32.c (nds32_elf_final_write_processing): Likewise.
* elf32-or1k.c (or1k_elf_final_write_processing): Likewise.
* elf32-pj.c (pj_elf_final_write_processing): Likewise.
* elf32-v850.c (v850_elf_final_write_processing): Likewise.
* elf32-xc16x.c (elf32_xc16x_final_write_processing): Likewise.
* elf32-xtensa.c (elf_xtensa_final_write_processing): Likewise.
* elf64-ia64-vms.c (elf64_vms_final_write_processing): Likewise.
* elfnn-ia64.c (elfNN_ia64_final_write_processing): Likewise.
* elf32-arm.c (arm_final_write_processing): Split out from..
(elf32_arm_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(elf32_arm_nacl_final_write_processing): Adjust.
* elfxx-mips.c (_bfd_mips_final_write_processing): Split out from..
(_bfd_mips_elf_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
* elfxx-mips.h (_bfd_mips_final_write_processing): Declare.
* elf32-mips.c (mips_vxworks_final_write_processing): Adjust.
* elf32-ppc.c (ppc_final_write_processing): Split out from..
(ppc_elf_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(ppc_elf_vxworks_final_write_processing): Adjust.
* elf32-sparc.c (sparc_final_write_processing): Split out from..
(elf32_sparc_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(elf32_sparc_vxworks_final_write_processing): Adjust.
* elf32-d10v.c (elf_backend_final_write_processing): Don't define.
* elf32-d30v.c (elf_backend_final_write_processing): Don't define.
* elf32-m68hc11.c (elf_backend_final_write_processing): Don't define.
* elf32-m68hc12.c (elf_backend_final_write_processing): Don't define.
* elf32-s12z.c (elf_backend_final_write_processing): Don't define.
* elf32-i386.c (elf_i386_check_relocs): Don't set has_gnu_symbols.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (elf_link_add_object_symbols): Likewise.
(elf_link_output_symstrtab): Set has_gnu_osabi for symbols here
instead.
|
|
Overflow checks were removed for all hi16 relocations except PC-relative
high relocations per PR ld/16720. Remove overflow checks from %pcrel_hi
relocations so that we can correctly handle negative offsets from PC.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_PCHI16>:
Remove overflow check.
ld/
* testsuite/ld-mips-elf/undefweak-overflow.s: Remove test case
for pcrel_hi/pcrel_lo.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update to match.
* testsuite/ld-mips-elf/reloc-pcrel-r6.s: New test source.
* testsuite/ld-mips-elf/reloc-pcrel-r6.d: New test linker script.
* testsuite/ld-mips-elf/reloc-pcrel-r6.ld: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Generate error
for TLS_TPREL_HI16(/LO16) relocations in shared library.
ld/
* testsuite/ld-mips-elf/pic-reloc-5.s: Add tests for
%tprel_hi and %tprel_lo relocations.
* testsuite/ld-mips-elf/pic-reloc-6.s: Likewise.
* testsuite/ld-mips-elf/pic-reloc-5.d: Update accordingly.
* testsuite/ld-mips-elf/pic-reloc-6.d: Likewise.
* testsuite/ld-mips-elf/pic-reloc-tls.ld: New test linker
script file.
|
|
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Add NULL pointer
checks. Search the RELA table for n64 relocations.
ld/
* testsuite/ld-mips-elf/pic-reloc-5.d: New test.
* testsuite/ld-mips-elf/pic-reloc-6.d: New test.
* testsuite/ld-mips-elf/pic-reloc-7.d: New test.
* testsuite/ld-mips-elf/pic-reloc-5.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-6.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-7.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Add a new option to get the linker to emit PLTs that use compact
branches instead of delay slot branches.
bfd/
* elfxx-mips.c (LA25_BC): New macro.
(mips_elf_link_hash_table)<compact_branches>: New field.
(STUB_JALRC): New macro.
(mipsr6_o32_exec_plt0_entry_compact): New array.
(mipsr6_n32_exec_plt0_entry_compact): Likewise.
(mipsr6_n64_exec_plt0_entry_compact): Likewise.
(mipsr6_exec_plt_entry_compact): Likewise.
(mips_elf_create_la25_stub): Use BC instead of J for stubs
when compact_branches is true.
(_bfd_mips_elf_finish_dynamic_symbol): Choose the compact
PLT for MIPSR6 with compact_branches. Do not reorder the
compact branches PLT. Switch the lazy stub for MIPSR6
with compact_branches to use JALRC.
(mips_finish_exec_plt): Choose the compact PLT0 for MIPSR6
when compact_branches is true.
(_bfd_mips_elf_compact_branches): New function.
* elfxx-mips.h (_bfd_mips_elf_compact_branches): New prototype.
ld/
* emultempl/mipself.em (compact_branches): New static variable.
(mips_create_output_section_statements): Call
_bfd_mips_elf_compact_branches.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_COMPACT_BRANCHES and
OPTION_NO_COMPACT_BRANCHES.
(PARSE_AND_LIST_LONGOPTS): Add compact-branches,
no-compact-branches.
(PARSE_AND_LIST_OPTIONS): Add --compact-branches,
--no-compact-branches.
(PARSE_AND_LIST_ARGS_CASES): Handle the above.
* ld.texinfo: Document --compact-branches, --no-compact-branches.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-r6.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.gd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-r6.s: New test source.
* testsuite/ld-mips-elf/pic-and-nonpic-3a-r6.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Instead of BFD_ASSERT (h != NULL) with
ld: BFD ... assertion fail .../bfd/elf64-x86-64.c:2562
ld: bad.o: invalid string offset 50331648 >= 371 for section `nterp'
check corrupt VTENTRY entry in bfd_elf_gc_record_vtentry with
ld: bad.o: section 'g': corrupt VTENTRY entry
* elf-m10300.c (mn10300_elf_check_relocs): Remove BFD_ASSERT of
"h != NULL". Don't check "h != NULL" before calling.
bfd_elf_gc_record_vtentry.
* elf32-arm.c (elf32_arm_check_relocs): Likewise.
* elf32-bfin.c (bfin_check_relocs): Likewise.
* elf32-cris.c (cris_elf_check_relocs): Likewise.
* elf32-csky.c (csky_elf_check_relocs): Likewise.
* elf32-d10v.c (elf32_d10v_check_relocs): Likewise.
* elf32-dlx.c (elf32_dlx_check_relocs): Likewise.
* elf32-fr30.c (fr30_elf_check_relocs): Likewise.
* elf32-frv.c (elf32_frv_check_relocs): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Likewise.
* elf32-iq2000.c (iq2000_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-mcore.c (mcore_elf_check_relocs): Likewise.
* elf32-metag.c (elf_metag_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-v850.c (v850_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Likewise.
* elf32-xstormy16.c (xstormy16_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-mmix.c (mmix_elf_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
* elf64-x86-64.c (elf_s390_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
* elflink.c (bfd_elf_gc_record_vtinherit): Check for corrupt
VTENTRY entry.
|
|
|
|
Accept R_MIPS_HI16, R_MIPS_HIGHER and R_MIPS_HIGHEST relocations and
their compressed counterparts in PIC code where the symbol referred is
absolute. Such an operation is meaningful, because an absolute symbol
effectively is a constant the calculation of the value of which has been
deferred to the static link time, and which is not going to change any
further at the dynamic load time. Therefore there is no need ever to
refuse the use of these relocations with such symbols, as the resulting
run-time value observed by the program will be correct even in PIC code.
This is not the case with R_MIPS_26 and its compressed counterparts,
because the run-time value calculated by the instructions these
relocations are used with depends on the address of the instruction
itself, and that can change according to the base address used by the
dynamic loader. Therefore these relocations have to continue being
rejected in PIC code even with absolute symbols.
This allows successful linking of code that relies on previous linker
behavior up to commit 861fb55ab50a ("Defer allocation of R_MIPS_REL32
GOT slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>,
which introduced the problematic check missing this special exception
for absolute symbols.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs) <R_MIPS16_HI16>
<R_MIPS_HI16, R_MIPS_HIGHER, R_MIPS_HIGHEST, R_MICROMIPS_HI16>
<R_MICROMIPS_HIGHER, R_MICROMIPS_HIGHEST>: Also accept an
absolute symbol in PIC code.
ld/
* testsuite/ld-mips-elf/pic-reloc-0.d: New test.
* testsuite/ld-mips-elf/pic-reloc-1.d: New test.
* testsuite/ld-mips-elf/pic-reloc-2.d: New test.
* testsuite/ld-mips-elf/pic-reloc-3.d: New test.
* testsuite/ld-mips-elf/pic-reloc-4.d: New test.
* testsuite/ld-mips-elf/pic-reloc-absolute-hi.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-absolute-lo.ld: New test
linker script.
* testsuite/ld-mips-elf/pic-reloc-ordinary.ld: New test linker
script.
* testsuite/ld-mips-elf/pic-reloc-j.s: New test source.
* testsuite/ld-mips-elf/pic-reloc-lui.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Switch from `_bfd_error_handler' to `info->callbacks->einfo' with error
reporting concerning the use of position-dependent relocations such as
R_MIPS_HI16 or R_MIPS_26 in PIC code and continue processing so that any
subsequent link errors are also shown rather than the linker terminating
right away. This can reduce user frustration where correcting one error
only reveals another one; instead all are shown together making them all
possible to investigate at once. The use of the `%X' specifier causes
the linker to terminate unsuccessfully at the end of processing.
Also fix the message to say `cannot' rather than `can not'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs) <R_MIPS16_26>
<R_MIPS_26, R_MICROMIPS_26_S1>: Use `info->callbacks->einfo'
rather than `_bfd_error_handler' to report refused relocations
in PIC code and continue processing. Fix error message: `can
not' -> `cannot'.
|
|
We have an issue in the MIPS backend, with the handling of undefined
hidden and internal weak symbols. References to such symbols are
supposed to resolve to 0 according to the ELF gABI[1]:
"Unresolved weak symbols have a zero value."
and the 64-bit MIPS psABI[2]:
"If a symbol with one of these [hidden or internal] attributes has no
definition within the executable/DSO being linked, then it must be
resolved to allocated space if common, resolved to zero if weak, or an
error reported otherwise."
however if a GOT relocation is used, then a local GOT entry is created
and used to satisfy the reference. Such an entry is then (in DSO and
PIE binaries) subject to the usual load-time relocation, which means a
non-zero value will be returned if the base address is non-zero. This
will defeat the usual run-time sequence like:
void a (void) __attribute__ ((visibility ("hidden"), weak));
void
x (void)
{
if (a)
a ();
}
This can be reproduced with this simple code:
$ cat libtest.c
extern int a __attribute__ ((visibility ("hidden"), weak));
int *
x (void)
{
return &a;
}
$ cat test.c
int *x (void);
int
main (void)
{
printf ("a: %p\n", x ());
return 0;
}
$ gcc -shared -fPIC -o libtest.so libtest.c
$ gcc -o test test.c -Wl,-rpath,$(pwd) libtest.so
$ ./test
a: 0x77184000
$
The usual approach targets take is making all the steps required to
assign a GOT entry for the symbol referred, and then leave its contents
at zero with no dynamic relocation attached, therefore ensuring that the
value does not change at load time. However this is not going to work
with the implicitly relocated GOT the MIPS psABI specifies[3]:
"The dynamic linker relocates the global offset table by first adding
the difference between the base where the shared object is loaded and
the value of the dynamic tag DT_MIPS_BASE_ADDRESS to all local global
offset table entries."
and we cannot therefore use the local GOT part.
And we cannot offhand use the global part either, as the symbol would
then have to be exported and possibly wrongly preempt symbols in other
modules involved in the dynamic load, because as per the ELF gABI[1] we
are not allowed to enter a hidden or internal symbol into the dynamic
symbol table (and then use its associated GOT entry):
"A hidden symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
and:
"An internal symbol contained in a relocatable object must be either
removed or converted to STB_LOCAL binding by the link-editor when the
relocatable object is included in an executable file or shared object."
So we have to choose something else.
Our choice is further limited by the need for the reference associated
with the GOT relocation to stay within the signed 16-bit limit from the
GOT pointer base register, while being compliant with the ELF gABI and
the MIPS psABI. However as Alan Modra has observed[4] one possibility
is to edit (relax) the code such that the GOT reference is removed
altogether.
Based on these observations then modify MIPS BFD linker backend code to:
1. Interpret code associated with GOT relocations and relax the usual LW
or LD instructions into a corresponding immediate load operation that
places the value of 0 in the intended register, while leaving the GOT
entry allocated and initialized as usually.
2. Leave any other instructions associated with GOT relocations in place
and instead redirect the reference to a global GOT entry associated
with a special `__gnu_absolute_zero' symbol created for this purpose,
whose value is 0, SHN_ABS section marks it absolute, binding is
global and export class protected, ensuring that the locally provided
value is always used at load time, and that the value is not
relocated by the dynamic loader.
3. Adjust any high-part GOT relocation used, typically associated with
a LUI instruction, accordingly, so that run-time consistency is
maintained, either by resolving to the original entry if the
instruction associated with the corresponding low-part GOT relocation
has been relaxed to an immediate load (in which case the value loaded
with LUI will be overwritten), or by also redirecting the reference
to `__gnu_absolute_zero' to complete the GOT access sequence if that
symbol has been used.
4. Add a target `elf_backend_hide_symbol' hook, for the three MIPS ABIs,
which prevents the `__gnu_absolute_zero' symbol from being forced
local, to ensure that the redirection works and the symbol remains
global/protected with existing linker scripts unchanged.
5. Observing the issue with handling SHN_ABS symbols in the GNU dynamic
loader, covered by glibc PR 19818, set the EI_ABIVERSION field in the
ELF file header produced to 4 (ABI_ABSOLUTE) if `__gnu_absolute_zero'
symbol has been produced and the target configured indicates the GNU
operating system, so that broken versions of the GNU dynamic loader
gracefully reject the file in loading rather than going astray. Keep
EI_ABIVERSION at the original value for other operating systems or if
no `__gnu_absolute_zero' symbol has been made.
The name of the special `__gnu_absolute_zero' has no meaning other than
how a human reader can interpret it, as it is ignored in dynamic loading
in the handling of the scenarios concerned. This is because the symbol
resolves locally, and it's only the symbol's attributes that matter so
that the associated GOT entry remains unchanged at load time.
Therefore the name is somewhat arbitrary, observing however the need to
use the name space reserved for the system so that it does not conflict
with a possible user symbol, and hence the leading underscore, and also
the `gnu' infix to denote a GNU feature. Other implementations wishing
to address the problem in a similar way may choose a different name and
have the solution still work, possibly with a mixture of modules used in
a dynamic having symbols of different names provided, which will however
not interact with each other due to the protected export class.
The symbol can be referred explicitly, however the name is an internal
implementation detail rather than a part of the ABI, and therefore no
specific semantics is guaranteed.
One limitation of this change is that if `__gnu_absolute_zero' has been
already defined, then we do not wipe the old definition and all kinds of
odd behavior can result. This is however like with other symbols we
internally define, such as `_GLOBAL_OFFSET_TABLE_' or `__rld_map', and
therefore left as a possible future enhancement.
As an optimization the relaxation of LW and LD instructions to a load of
immediate zero is always made, even SVR4 PIC code for code that will end
up in a regular (non-PIE) executable, because there is a cache advantage
with the avoidance of a load from the GOT, even if it is otherwise
guaranteed to remain zero. It does not reliably happen though, due to a
symbol exportation issue affecting executables, covered by PR ld/21805.
One existing test case needs to be updated, as it triggers relaxation
introduced with this change and consequently linker output does not
match expectations anymore. As we want to keep the original issue
covered with the test case modify it then to use the LWL instruction in
place of LW, and adjust the output expected accordingly.
References:
[1] "System V Application Binary Interface - DRAFT - 19 October 2010",
The SCO Group, Section "Symbol Table",
<http://www.sco.com/developers/gabi/2012-12-31/ch4.symtab.html>
[2] "64-bit ELF Object File Specification, Draft Version 2.5", MIPS
Technologies / Silicon Graphics Computer Systems, Order Number
007-4658-001, Section 2.5 "Symbol Table", p. 22,
<http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf>
[3] "SYSTEM V APPLICATION BINARY INTERFACE, MIPS RISC Processor
Supplement, 3rd Edition", Section "Global Offset Table", p. 5-10,
<http://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf>
[4] "Undo dynamic symbol state after regular object sym type mismatch",
<https://sourceware.org/ml/binutils/2017-07/msg00265.html>
bfd/
PR ld/21375
* elfxx-mips.h (_bfd_mips_elf_hide_symbol): New prototype.
(_bfd_mips_elf_linker_flags): Update prototype.
* elf32-mips.c (elf_backend_hide_symbol): New macro.
* elf64-mips.c (elf_backend_hide_symbol): Likewise.
* elfn32-mips.c (elf_backend_hide_symbol): Likewise.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`use_absolute_zero' and `gnu_target' members.
(mips_elf_record_global_got_symbol): Call
`_bfd_mips_elf_hide_symbol' rather than
`_bfd_elf_link_hash_hide_symbol'.
(mips_use_local_got_p): Return FALSE if the symbol is absolute.
(mips_elf_obtain_contents): Reorder function.
(mips_elf_nullify_got_load): New function.
(mips_elf_calculate_relocation): Add `contents' parameter.
Nullify GOT loads or if it is not possible, then redirect GOT
relocations to the `__gnu_absolute_zero' symbol, for references
that are supposed to resolve to zero.
(mips_elf_define_absolute_zero): New function.
(_bfd_mips_elf_check_relocs): Prepare for arrangements made in
`mips_elf_calculate_relocation' for references made via the GOT
that are supposed to resolve to zero.
(_bfd_mips_elf_hide_symbol): New function.
(_bfd_mips_elf_linker_flags): Add the `gnu_target' parameter,
set the `gnu_target' member of the MIPS hash table.
(MIPS_LIBC_ABI_ABSOLUTE): New enumeration constant.
(_bfd_mips_post_process_headers): Use it.
ld/
PR ld/21375
* emultempl/mipself.em: Set `gnu_target' according to ${target}.
(mips_create_output_section_statements): Update call to
`_bfd_mips_elf_linker_flags'.
* testsuite/ld-mips-elf/pr21334.s: Use LWL rather than LW.
* testsuite/ld-mips-elf/pr21334.dd: Update accordingly.
|
|
Move code used to store the contents of a relocated field in output into
a separate function, `mips_elf_store_contents', complementing existing
`mips_elf_obtain_contents'.
bfd/
* elfxx-mips.c (mips_elf_store_contents): New function...
(mips_elf_perform_relocation): ... factored out from here.
|
|
bfd/
* archures.c (bfd_architecture): New machine
bfd_mach_mips_gs264e.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle
E_MIPS_MACH_GS264E.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Map bfd_mach_mips_gs264e to
bfd_mach_mips_gs464e extension.
binutils/
* NEWS: Mention Loongson 2K1000 proccessor support.
* readelf.c (get_machine_flags): Handle gs264e.
elfcpp/
* mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E.
(mips_cpu_info_table): Add gs264e descriptors.
* doc/as.texi (march table): Add gs264e.
include/
* elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E.
* opcode/mips.h (CPU_XXX): New CPU_GS264E.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination
gs264e and gs464e.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs264e descriptors.
|
|
bfd/
* archures.c (bfd_architecture): New machine
bfd_mach_mips_gs464e.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Handle
E_MIPS_MACH_GS464E.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Map bfd_mach_mips_gs464e to
bfd_mach_mips_gs464 extension.
binutils/
* NEWS: Mention Loongson 3A2000/3A3000 proccessor support.
* readelf.c (get_machine_flags): Handle gs464e.
elfcpp/
* mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E.
(mips_cpu_info_table): Add gs464e descriptors.
* doc/as.texi (march table): Add gs464e.
include/
* elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E.
* opcode/mips.h (CPU_XXX): New CPU_GS464E.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination
gs464e and gs464.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs464e descriptors.
|
|
bfd/
* archures.c (bfd_architecture): Rename
bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (enum I_xxx): Likewise.
(arch_info_struct): Likewise.
* elfxx-mips.c (_bfd_elf_mips_mach): Likewise.
(mips_set_isa_flags): Likewise.
(mips_mach_extensions): Likewise.
(bfd_mips_isa_ext_mach): Likewise.
(bfd_mips_isa_ext): Likewise.
(print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A.
binutils/
* NEWS: Mention Loongson 3A1000 proccessor support.
* readelf.c (get_machine_flags): Rename loongson-3a to gs464.
(print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A.
elfcpp/
* mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to
E_MIPS_MACH_GS464.
gas/
* config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename
CPU_LOONGSON_3A to CPU_GS464.
(mips_cpu_info_table): Add gs464 descriptors, Keep
loongson3a as an alias of gs464 for compatibility.
* doc/as.texi (march table): Rename loongson3a to gs464.
* testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension"
flag to None.
gold/
* mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach):
Rename loongson3a to gs464.
(mips_isa_ext_mach, mips_isa_ext): Delete loongson3a.
(infer_abiflags): Use ases instead of isa_ext for infer ABI
flags.
(elf_mips_mach_name): Rename loongson3a to gs464.
include/
* elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to
E_MIPS_MACH_GS464.
(AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A.
* opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A.
(CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464.
* opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case.
ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a
to gs464.
opcodes/
* mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep
loongson3a as an alias of gs464 for compatibility.
* mips-opc.c (mips_opcodes): Change Comments.
|
|
bfd/
* elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension.
binutils/
* readelf.c (print_mips_ases): Add Loongson EXT2 extension.
gas/
* NEWS: Mention Loongson EXTensions R2 (EXT2) support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and
OPTION_NO_LOONGSON_EXT2.
(md_longopts): Likewise.
(mips_ases): Define availability for EXT.
(mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to
AFL_ASE_LOONGSON_EXT2.
(md_show_usage): Add help for -mloongson-ext2 and
-mno-loongson-ext2.
* doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2.
* doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2,
.set loongson-ext2 and .set noloongson-ext2.
* testsuite/gas/mips/loongson-ext2.d: New test.
* testsuite/gas/mips/loongson-ext2.s: New test.
* testsuite/gas/mips/mips.exp: Run loongson-ext2 test.
include/
* elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2.
* opcode/mips.h (ASE_LOONGSON_EXT2): New macro.
opcodes/
* mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext
option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (LEXT2): New macro.
(mips_opcodes): Add cto, ctz, dcto, dctz instructions.
|
|
bfd/
* elfxx-mips.c (infer_mips_abiflags): Use ases instead of
isa_ext for infer ABI flags.
(print_mips_ases): Add Loongson EXT extension.
binutils/
* readelf.c (print_mips_ases): Add Loongson EXT extension.
elfcpp/
* mips.h (AFL_ASE_LOONGSON_EXT): New enum.
gas/
* NEWS: Mention Loongson EXTensions (EXT) support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and
OPTION_NO_LOONGSON_EXT.
(md_longopts): Likewise.
(mips_ases): Define availability for EXT.
(mips_convert_ase_flags): Map ASE_LOONGSON_EXT to
AFL_ASE_LOONGSON_EXT.
(mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a.
(md_show_usage): Add help for -mloongson-ext and
-mno-loongson-ext.
* doc/as.texi: Document -mloongson-ext, -mno-loongson-ext.
* doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext,
.set loongson-ext and .set noloongson-ext.
* testsuite/gas/mips/loongson-mmi.d: Add ASE flag.
include/
* elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT.
* opcode/mips.h (ASE_LOONGSON_EXT): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add EXT to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-ext option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (IL3A): Delete.
* mips-opc.c (LEXT): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT
instructions.
|
|
bfd/
* elfxx-mips.c (print_mips_ases): Add CAM extension.
binutils/
* readelf.c (print_mips_ases): Add CAM extension.
gas/
* NEWS: Mention Loongson Content Address Memory (CAM)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and
OPTION_NO_LOONGSON_CAM.
(md_longopts): Likewise.
(mips_ases): Define availability for CAM.
(mips_convert_ase_flags): Map ASE_LOONGSON_CAM to
AFL_ASE_LOONGSON_CAM.
(mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a.
(md_show_usage): Add help for -mloongson-cam and
-mno-loongson-cam.
* doc/as.texi: Document -mloongson-cam, -mno-loongson-cam.
* doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam,
.set loongson-cam and .set noloongson-cam.
* testsuite/gas/mips/loongson-3a-2.d: Move cam test to ...
* testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a-2.s: Move cam test to ...
* testsuite/gas/mips/loongson-cam.s: Here.
* testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag.
* testsuite/gas/mips/mips.exp: Run loongson-cam test.
include/
* elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM.
* opcode/mips.h (ASE_LOONGSON_CAM): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add CAM to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-cam option.
(print_mips_disassembler_options): Document -M loongson-cam.
* mips-opc.c (LCAM): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM
instructions.
|
|
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
|
|
Fix a crash that occurs in `_bfd_mips_elf_finish_dynamic_sections' if a
dynamic relocation section has been created, but marked to be discarded
by an assignment to the /DISCARD/ output section in a linker script.
In that case the output section is the absolute section, which has no
ELF section data attached, so trying to set its `sh_size' parameter
causes a null pointer dereference.
This is only done as the value for the DT_RELSZ dynamic entry is being
set, so fix the problem by not creating DT_REL, DT_RELSZ or DT_RELENT
dynamic entries in the first place if the dynamic relocation section
will not be output, as with no dynamic relocation data present these
would not serve their purpose anyway.
Add a generic ELF test case to verify that no dynamic relocation data is
reported in the dynamic segment.
bfd/
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Do not
create DT_REL, DT_RELSZ or DT_RELENT dynamic entries if the
dynamic relocation section will be discarded from output.
(_bfd_mips_elf_finish_dynamic_sections) <DT_RELSZ>: Assert that
the dynamic relocation section will be retained in output.
ld/
* testsuite/ld-elf/reloc-discard.d: New test.
* testsuite/ld-elf/reloc-discard.ld: New test linker script.
* testsuite/ld-elf/reloc-discard.s: New test source.
|
|
Correct an issue with commit 0f20cc3522e7 ("TLS support for MIPS"),
<https://sourceware.org/ml/binutils/2005-02/msg00607.html>, where a
condition used to determine whether to use a dynamic symbol for GD, LD
and IE TLS dynamic relocations against a symbol that has been defined
locally has been incorrectly reversed.
It's executables rather than dynamic shared objects where no symbol is
required, because such symbols cannot be preempted and therefore their
values (thread pointer offsets) are fixed at the static link time as is
the associated module ID of the main executable, so the original
condition should have been `shared' instead of `!shared'. This wrong
condition was then later converted from `!shared' to `!bfd_link_pic',
with commit 0e1862bb401f ("Add output_type to bfd_link_info").
Use the correct `bfd_link_dll' condition then, and adjust code for the
dynamic symbol index possibly being -1 as with symbols that have been
forced local, removing unnecessary dynamic relocations from dynamic
regular executables. PIE executables are unaffected as the existing
condition excluded them by chance due to the conversion mentioned above.
Adjust test cases accordingly.
bfd/
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `!bfd_link_pic' in determining the dynamic symbol index.
Avoid the index of -1.
(mips_elf_initialize_tls_slots): Likewise. Flatten code by
moving `dyn' to the beginning of the function block.
ld/
* testsuite/ld-mips-elf/tlsdyn-o32.d: Update test for dynamic
relocation removal.
* testsuite/ld-mips-elf/tlsdyn-o32.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.got: Likewise.
|
|
Correct a commit 0e1862bb401f ("Add output_type to bfd_link_info") issue
and use `bfd_link_dll' rather than `bfd_link_pic' in determining whether
to fully resolve GD, LD and IE TLS relocations referring to symbols
locally defined rather than deferring them to the load time by means of
dynamic relocations.
Such symbols cannot be preempted in PIE executables, which are
necessarily PIC, and therefore their values (thread pointer offsets) are
fixed at the static link time as is the associated module ID of the main
executable.
Given the `tlsbin-o32.s' and `tlsdyn-o32.s' sources from our test suite
this removes the absolute TLS relocations from the static:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
and the dynamic:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
10000044 R_MIPS_TLS_DTPMOD32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
PIE executable respectively, as reported by `objdump -R', and fills the
corresponding GOT slots with the values expected, as recorded with the
test cases added. The new output from `objdump -R' is:
DYNAMIC RELOCATION RECORDS (none)
and:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
for the static and the dynamic executable respectively.
2018-07-11 Maciej W. Rozycki <macro@mips.com>
Rich Felker <bugdal@aerifal.cx>
bfd/
PR ld/22570
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `bfd_link_pic' to determine whether dynamic relocations are
to be produced.
(mips_elf_initialize_tls_slots): Likewise.
ld/
PR ld/22570
* testsuite/ld-mips-elf/tlsbin-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsbin-pie-o32.got: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Correct a MIPS/BFD linker issue with dynamic symbol and corresponding
GOT entry values being redirected to lazy binding stubs where the stubs
section has been discarded by assigning to the `/DISCARD/' output
section in the linker script used. The issue manifests itself by the
values entered being relative to the absolute section, which is what any
discarded sections are internally assigned in the linker.
For the `stub-dynsym-2.s' piece of code included as a test case with
this change this issue results in the dynamic symbol table and the GOT
looking like:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000010 0 FUNC GLOBAL DEFAULT UND bar
2: 00000000 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 00000010 00000010 FUNC UND bar
0009000c -32740(gp) 00000000 00000000 FUNC UND foo
if assembled to regular MIPS code, or:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000d 0 FUNC GLOBAL DEFAULT UND bar
2: 00000001 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 0000000d 0000000d FUNC UND bar
0009000c -32740(gp) 00000001 00000001 FUNC UND foo
if assembled to microMIPS code. Symbol values and GOT entries record
the offset into the inexistent stubs section and the ISA bit rather than
zero, which would be the case if a lazy binding stub was not used for
other reasons, such as the value of the symbol being taken for a purpose
other than making a function call (e.g. an R_MIPS_GOT16 relocation).
Correct the issue by refraining from redirecting symbols to lazy binding
stubs if the stubs section is going to be discarded.
bfd/
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Don't set
`->needs_lazy_stub' if the stubs output section is the absolute
section.
ld/
* testsuite/ld-mips-elf/stub-dynsym-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.dd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.gd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.sd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-2.ld: New test linker
script.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.ld: New test
linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Prevent runtime procedure table symbols, produced with `ict_irix5' MIPS
targets, from being swept in section GC, fixing linker errors like:
./ld-new: tmpdir/dump: protected symbol `_procedure_table_size' isn't defined
./ld-new: final link failed: bad value
triggered whenever section GC is enabled with those targets and
consequently removing the following test suite failures:
FAIL: Build pr22649-2a.so
FAIL: Build pr22649-2c.so
FAIL: PR ld/20828 dynamic symbols with section GC (auxiliary shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (plain)
FAIL: PR ld/20828 dynamic symbols with section GC (version script)
FAIL: PR ld/20828 dynamic symbols with section GC (versioned shared library)
FAIL: PR ld/20828 dynamic symbols with section GC (versioned)
FAIL: --gc-sections with .text._init
FAIL: pr20022
observed with `mips-elf', `tx39-elf', `mipsisa32-elf', `mipsisa64-elf',
`mipsel-elf', `mipsisa32el-elf', `mipsisa64el-elf', `mips64vr-elf',
`mips64vrel-elf', `mips64vr4300-elf', `mips64vr4300el-elf',
`mips-sgi-irix5' and `mips-rtems' targets, among others. This fix makes
section GC usable with the affected targets.
bfd/
* elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Set
`mark' for symbols created from `mips_elf_dynsym_rtproc_names'
list.
|
|
Remove an extraneous symbol visibility check made for undefined weak
symbols in determination whether an R_MIPS_REL32 dynamic relocation has
to be placed in output, complementing commit ad9512030937 ("mips: Check
UNDEFWEAK_NO_DYNAMIC_RELOC"). That check duplicates one already made by
the UNDEFWEAK_NO_DYNAMIC_RELOC macro as a part of a broader condition
used to decide if to enter undefined weak symbols to the dynamic symbol
table or not.
bfd/
* elfxx-mips.c (allocate_dynrelocs): Remove extraneous symbol
visibility check made for undefined weak symbols.
|
|
Correct the formatting of `_bfd_mips_elf_compact_eh_encoding' and
`_bfd_mips_elf_cant_unwind_opcode' definitions which extend beyond 79
columns.
bfd/
* elfxx-mips.c (_bfd_mips_elf_compact_eh_encoding)
(_bfd_mips_elf_cant_unwind_opcode): Correct formatting.
|
|
Shuffle code in `_bfd_mips_post_process_headers' so that the setting of
the EI_ABIVERSION ELF file header field is complete before calling
`_bfd_elf_post_process_headers'. This used to be the case, but was
changed with commit 351cdf24d223 ("[MIPS] Implement O32 FPXX, FP64 and
FP64A ABI extensions") for no reason.
bfd/
* elfxx-mips.c (_bfd_mips_post_process_headers): Keep
EI_ABIVERSION setting together.
|
|
Define enumeration constants based on generated `libc-abis.h' from GNU
libc, adding a MIPS_ prefix as these are port-specific. Use them to
replace magic numbers stored in the EI_ABIVERSION field of the ELF file
header.
bfd/
* elfxx-mips.c (MIPS_LIBC_ABI_DEFAULT, MIPS_LIBC_ABI_MIPS_PLT)
(MIPS_LIBC_ABI_UNIQUE, MIPS_LIBC_ABI_MIPS_O32_FP64)
(MIPS_LIBC_ABI_MAX): New enumeration constants.
(_bfd_mips_post_process_headers): Use them in place of magic
numbers.
|
|
The addressable signed 32-bit range for n64 MIPS `.got.plt' references
is from 0xffffffff7fff8000 to 0x7fff7fff, due to how the composition of
an LUI and an LD instruction works for address calculation in the 64-bit
addressing mode, such as when CP0.Status.UX=1.
We currently have a range check in `mips_finish_exec_plt', however it is
not correct as it verifies that the `.got.plt' start address referred is
between 0xffffffff80000000 and 0x7fffffff. It is also implemented as an
assertion rather than a proper error message despite that the situation
can be triggered by user input. Additionally there is no check made for
individual `.got.plt' entries referred even though they can be out of
range while the `.got.plt' start address is not.
Fix all these problems and use the correct range for the check, limiting
it to n64 output files, and then issue a proper error message both in
`mips_finish_exec_plt' and in `_bfd_mips_elf_finish_dynamic_symbol',
suggesting the use of the `-Ttext-segment=...' option that will often
work and with the default linker scripts in particular. Add suitable
tests covering boundary cases.
bfd/
PR ld/22966
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Verify the
`.got.plt' entry referred is in range.
(mips_finish_exec_plt): Correct the range check for `.got.plt'
start. Replace the assertion used for that with a proper error
message.
ld/
PR ld/22966
* testsuite/ld-mips-elf/n64-plt-1.dd: New test.
* testsuite/ld-mips-elf/n64-plt-1.gd: New test.
* testsuite/ld-mips-elf/n64-plt-2.ed: New test.
* testsuite/ld-mips-elf/n64-plt-3.ed: New test.
* testsuite/ld-mips-elf/n64-plt-4.dd: New test.
* testsuite/ld-mips-elf/n64-plt-4.gd: New test.
* testsuite/ld-mips-elf/n64-plt-1.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-2.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-3.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt-4.ld: New test linker script.
* testsuite/ld-mips-elf/n64-plt.s: New test source.
* testsuite/ld-mips-elf/n64-plt-lib.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
Fix a formatting fallout in `_bfd_mips_elf_finish_dynamic_symbol' from
commit ce558b89b15a ("Delete duplicate target short-cuts to dynamic
sections").
bfd/
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Fix
formatting.
|
|
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
|
|
Many ELF targets arrange to emit a number of section symbols in
.dynsym for use by dynamic relocations. This happens before the
dynamic relocations are output, and the need for those symbols
determined. In most cases they are not needed. A proper analysis of
the need for dynamic section symbols is target specific and tedious,
so this patch just excludes them in the obvious case when no
dynamic relocations are present.
The patch also runs the new pr23161 and pr23162 tests on more targets.
bfd/
* elf-bfd.h (struct elf_link_hash_table): Add "dynamic_relocs".
* elflink.c (_bfd_elf_init_2_index_sections): Comment fix.
(_bfd_elf_add_dynamic_entry): Set "dynamic_relocs".
(_bfd_elf_link_renumber_dynsyms): Exclude all section symbols when
"dynamic_relocs" is not set.
* elfxx-mips.c (count_section_dynsyms): Likewise.
ld/
* testsuite/ld-elf/readelf.exp: Delete DUMP and selection of
variant ver_def.vd.
* testsuite/ld-elf/ver_def-tic6x.vd: Delete.
* testsuite/ld-elf/shared.exp: Run most pr23161 and pr23162 tests for
linux, nacl and gnu targets.
* testsuite/ld-mips-elf/mips-elf.exp: Set base_syms to 1.
* testsuite/ld-elf/pr23161a.rd: Don't check reloc type. Allow any
order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23161b.rd: Don't check plt and dyn relocs.
Allow and order of __bss_start, _edata and _end.
* testsuite/ld-elf/pr23162.rd: Fail if __bss_start, _edata or _end
relocs are present rather than testing for no relocations.
* testsuite/ld-aarch64/gc-plt-relocs.d,
* testsuite/ld-aarch64/ifunc-1-local.d,
* testsuite/ld-aarch64/ifunc-1.d,
* testsuite/ld-aarch64/ifunc-2-local.d,
* testsuite/ld-aarch64/ifunc-2.d,
* testsuite/ld-aarch64/ifunc-21.d,
* testsuite/ld-aarch64/ifunc-3a.d,
* testsuite/ld-arm/farcall-mixed-lib-v4t.d,
* testsuite/ld-arm/farcall-mixed-lib.d,
* testsuite/ld-arm/gc-hidden-1.d,
* testsuite/ld-arm/tls-gdesc-got.d,
* testsuite/ld-arm/tls-lib-loc.d,
* testsuite/ld-arm/tls-longplt-lib.d,
* testsuite/ld-arm/tls-thumb1.d,
* testsuite/ld-cris/libdso-10.d,
* testsuite/ld-cris/libdso-11.d,
* testsuite/ld-cris/libdso-13b.d,
* testsuite/ld-cris/libdso-14.d,
* testsuite/ld-cris/libdso-15.d,
* testsuite/ld-cris/pic-gc-72.d,
* testsuite/ld-cris/pic-gc-73.d,
* testsuite/ld-cris/tls-gc-71.d,
* testsuite/ld-mips-elf/mips16-pic-4a.nd,
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd,
* testsuite/ld-mips-elf/pie-n32.d,
* testsuite/ld-mips-elf/pie-n64.d,
* testsuite/ld-mips-elf/pie-o32.d: Update for removed dynamic
section symbols.
|
|
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
|
|
The _gp_disp is a magic symbol, always implicitly defined by the linker.
It does not make a sense to write it into symbol tables for output files.
Moreover, now if the linker gets a version script, the _gp_disp symbol
gets zero version definition index. The zero index means[1]:
"The symbol is local, not available outside the object."
But the _gp_disp symbol has GLOBAL binding. That confuses some tools
like for example the LLD linker when they get such files as inputs.
This patch fixes the problem - it prevents writing the _gp_disp symbol
in regular and dynamic symbol tables.
This was tested by running LD test suite on a mipsel-linux board.
References:
[1] "Linux Standard Base Specification", Section "10.7.2 Symbol
Version Table", p. 32
2018-05-03 Simon Atanasyan <simon@atanasyan.com>
bfd/
* elf32-mips.c: (elf32_mips_fixup_symbol): New function.
(elf_backend_fixup_symbol): New macro.
* elfxx-mips.c: (mips_elf_output_extsym): Discard _gp_disp
handling.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
ld/
* testsuite/ld-mips-elf/gp-disp-sym.d: New test.
* testsuite/ld-mips-elf/gp-disp-sym.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
* testsuite/ld-mips-elf/mips16-pic-2.ad: Update for _gp_disp
symbol removal.
* testsuite/ld-mips-elf/mips16-pic-2.nd: Likewise.
* testsuite/ld-mips-elf/pic-and-nonpic-3a.dd: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Likewise.
* testsuite/ld-mips-elf/tlslib-o32.got: Likewise.
|
|
Currently, when `mips_elf_calculate_relocation' is asked to relocate an
undefined symbol, it reports an error or a warning and immediately
returns without performing the relocation. This is fine if the link
fails, but if unresolved_syms_in_objects == RM_GENERATE_WARNING, the
link will continue and output some unrelocated code, which is a
regression from commit e7e2196da3f0 ("MIPS/BFD: Correctly report
undefined relocations").
Fix this by continuing after calling the `undefined_symbol' hook unless
this is an error condition.
bfd/
PR ld/21900
* elfxx-mips.c (mips_elf_calculate_relocation): Only return
after calling `undefined_symbol' hook if this is an error
condition. Assume the value of 0 for the symbol requested
otherwise.
ld/
PR ld/21900
* testsuite/ld-mips-elf/undefined-warn.d: New test.
* testsuite/ld-mips-elf/undefined.s: Add padding at the end.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
More standardization of messages.
bfd/
* elfxx-mips.c: Standardize error/warning messages.
binutils/
* testsuite/binutils-all/mips/mips-reginfo-n32.d,
* testsuite/binutils-all/mips/mips-reginfo.d: Update.
gas/
* testsuite/gas/mips/reginfo-2.l: Update.
ld/
* testsuite/ld-mips-elf/attr-gnu-4-12.d,
* testsuite/ld-mips-elf/attr-gnu-4-13.d,
* testsuite/ld-mips-elf/attr-gnu-4-14.d,
* testsuite/ld-mips-elf/attr-gnu-4-16.d,
* testsuite/ld-mips-elf/attr-gnu-4-17.d,
* testsuite/ld-mips-elf/attr-gnu-4-18.d,
* testsuite/ld-mips-elf/attr-gnu-4-19.d,
* testsuite/ld-mips-elf/attr-gnu-4-21.d,
* testsuite/ld-mips-elf/attr-gnu-4-23.d,
* testsuite/ld-mips-elf/attr-gnu-4-24.d,
* testsuite/ld-mips-elf/attr-gnu-4-25.d,
* testsuite/ld-mips-elf/attr-gnu-4-26.d,
* testsuite/ld-mips-elf/attr-gnu-4-27.d,
* testsuite/ld-mips-elf/attr-gnu-4-28.d,
* testsuite/ld-mips-elf/attr-gnu-4-29.d,
* testsuite/ld-mips-elf/attr-gnu-4-31.d,
* testsuite/ld-mips-elf/attr-gnu-4-32.d,
* testsuite/ld-mips-elf/attr-gnu-4-34.d,
* testsuite/ld-mips-elf/attr-gnu-4-35.d,
* testsuite/ld-mips-elf/attr-gnu-4-36.d,
* testsuite/ld-mips-elf/attr-gnu-4-37.d,
* testsuite/ld-mips-elf/attr-gnu-4-38.d,
* testsuite/ld-mips-elf/attr-gnu-4-39.d,
* testsuite/ld-mips-elf/attr-gnu-4-41.d,
* testsuite/ld-mips-elf/attr-gnu-4-42.d,
* testsuite/ld-mips-elf/attr-gnu-4-43.d,
* testsuite/ld-mips-elf/attr-gnu-4-45.d,
* testsuite/ld-mips-elf/attr-gnu-4-46.d,
* testsuite/ld-mips-elf/attr-gnu-4-47.d,
* testsuite/ld-mips-elf/attr-gnu-4-48.d,
* testsuite/ld-mips-elf/attr-gnu-4-49.d,
* testsuite/ld-mips-elf/attr-gnu-4-52.d,
* testsuite/ld-mips-elf/attr-gnu-4-53.d,
* testsuite/ld-mips-elf/attr-gnu-4-54.d,
* testsuite/ld-mips-elf/attr-gnu-4-58.d,
* testsuite/ld-mips-elf/attr-gnu-4-59.d,
* testsuite/ld-mips-elf/attr-gnu-4-61.d,
* testsuite/ld-mips-elf/attr-gnu-4-62.d,
* testsuite/ld-mips-elf/attr-gnu-4-63.d,
* testsuite/ld-mips-elf/attr-gnu-4-64.d,
* testsuite/ld-mips-elf/attr-gnu-4-68.d,
* testsuite/ld-mips-elf/attr-gnu-4-69.d,
* testsuite/ld-mips-elf/attr-gnu-4-71.d,
* testsuite/ld-mips-elf/attr-gnu-4-72.d,
* testsuite/ld-mips-elf/attr-gnu-4-73.d,
* testsuite/ld-mips-elf/attr-gnu-4-74.d,
* testsuite/ld-mips-elf/attr-gnu-4-78.d,
* testsuite/ld-mips-elf/attr-gnu-4-79.d,
* testsuite/ld-mips-elf/attr-gnu-4-81.d,
* testsuite/ld-mips-elf/attr-gnu-4-89.d,
* testsuite/ld-mips-elf/attr-gnu-8-12.d,
* testsuite/ld-mips-elf/attr-gnu-8-21.d,
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d,
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d,
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d,
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d,
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d,
* testsuite/ld-mips-elf/bal-jalx-pic.d,
* testsuite/ld-mips-elf/mode-change-error-1.d,
* testsuite/ld-mips-elf/unaligned-branch-2.d,
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d,
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d,
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d,
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d,
* testsuite/ld-mips-elf/unaligned-branch-micromips.d,
* testsuite/ld-mips-elf/unaligned-branch-mips16.d,
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d,
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d,
* testsuite/ld-mips-elf/unaligned-branch.d,
* testsuite/ld-mips-elf/unaligned-jalx-1.d,
* testsuite/ld-mips-elf/unaligned-jalx-3.d,
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d,
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d,
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d,
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d,
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d,
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d,
* testsuite/ld-mips-elf/unaligned-jump-micromips.d,
* testsuite/ld-mips-elf/unaligned-jump-mips16.d,
* testsuite/ld-mips-elf/unaligned-jump.d: Update.
|
|
It must get boring translating all the variants we have of
unrecognized/unsupported/invalid/unexpected reloc number. This patch
cuts down on the number of variations.
* aoutx.h, * coff-alpha.c, * coff-i860.c, * coff-m68k.c,
* coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c,
* coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-w65.c,
* elf-bfd.h, * elf-m10300.c, * elf.c, * elf32-avr.c, * elf32-bfin.c,
* elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c,
* elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
* elf32-fr30.c, * elf32-frv.c, * elf32-i370.c, * elf32-i386.c,
* elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c,
* elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c,
* elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c,
* elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c,
* elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-or1k.c,
* elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c,
* elf32-s390.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c,
* elf32-xgate.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c,
* elfnn-riscv.c, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-riscv.h,
* elfxx-sparc.c, * elfxx-sparc.h, * reloc.c: Standardize
unrecognized/unsupported reloc message.
|
|
Revert commit 58807c48a5a3 ("_bfd_mips_elf_final_link: Notify user about
wrong .reginfo size") now that the size of the `.reginfo' section has
been truly fixed in `_bfd_mips_elf_section_processing', meaning that the
offending condition can be asserted again.
bfd/
Revert
2018-01-12 Vlad Ivanov <vlad@ivanov.email>
* elfxx-mips.c (_bfd_mips_elf_final_link): Notify user when
.reginfo section has wrong size.
|
|
Use the SEC_FIXED_SIZE flag to actually fix the size of `.reginfo' and
`.MIPS.abiflags' sections in `_bfd_mips_elf_always_size_sections', as
originally intended, removing link failures such as:
ld: final link failed: Section has no contents
or:
ld: final link failed: Bad value
or:
ld: foo: .reginfo section size should be 24 bytes, actual size is 32
and assertion failures like:
ld: BFD (GNU Binutils) 2.30.51.20180131 assertion fail .../bfd/elfxx-mips.c:14322
in link scenarios involving a linker script that either creates an
output `.reginfo' or `.MIPS.abiflags' section from scratch or produces
either section from different sections. If such an output section's
size turns out to be incorrect according to the psABI, then the section
is either truncated or padded out to the correct size, as relevant.
This allows people to handle these sections in a link in an unusual way,
while still addressing the issue covered by commit 58807c48a5a3
("_bfd_mips_elf_final_link: Notify user about wrong .reginfo size").
The original arrangement, coming from an unindentified change made to
what was called `mips_elf_always_size_sections' back then, between
commit 02650bd0a97e ("This adds ABI flags to MIPS/ELF object files.")
and commit 252b5132c753 ("19990502 sourceware import"), also missing
from BFD ChangeLog files, assumed that the output section size is not
going to change after return from `bfd_elf_size_dynamic_sections', the
caller of that function, called in turn from `ldemul_before_allocation'
via `gld${EMULATION_NAME}_before_allocation' in ld/emultempl/elf32.em,
and ultimately from `lang_process'. This is because later on in
`lang_process' processing `lang_size_sections' is called , happily
recalculating the section size, and it has actually already been the
case at the time of commit 252b5132c753 ("19990502 sourceware import"),
so the assumption was clearly incorrect right from the beginning.
bfd/
* elfxx-mips.c (_bfd_mips_elf_always_size_sections): Set
SEC_FIXED_SIZE and SEC_HAS_CONTENTS flags for `.reginfo' and
`.MIPS.abiflags' sections.
(_bfd_mips_elf_final_link): Avoid reading beyond `.reginfo'
section's end.
ld/
* testsuite/ld-mips-elf/reginfo-0.d: New test.
* testsuite/ld-mips-elf/reginfo-0r.d: New test.
* testsuite/ld-mips-elf/reginfo-1.d: New test.
* testsuite/ld-mips-elf/reginfo-1r.d: New test.
* testsuite/ld-mips-elf/reginfo-2.d: New test.
* testsuite/ld-mips-elf/reginfo-2r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2r.d: New test.
* testsuite/ld-mips-elf/reginfo-0.ld: New test linker script.
* testsuite/ld-mips-elf/reginfo-1.ld: New test linker script.
* testsuite/ld-mips-elf/mips-abiflags-0.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-abiflags-1.ld: New test linker
script.
* testsuite/ld-mips-elf/reginfo-1.s: New test source.
* testsuite/ld-mips-elf/reginfo-2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
|
|
and fix a few stray errors.
* elf-attrs.c (_bfd_elf_parse_attributes): Correct _bfd_error_handler
arguments.
* elfxx-mips.c (_bfd_mips_elf_final_link): Likewise.
* elfnn-riscv.c (_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_pc): Likewise and fix typos.
* libbfd-in.h (_bfd_error_handler): Add attribute printf.
* libbfd.h: Regenerate.
|
|
* bfd-in.h: Include inttypes.h or if not available define
PRId64, PRIu64 and PRIx64.
* bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Remove support for L
modifier to print bfd_vma.
* coff-arm.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c,
* coff-sh.c, * coff-tic80.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * dwarf2.c, * elf-m10300.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-bfin.c, * elf32-cris.c, * elf32-hppa.c,
* elf32-i386.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32r.c,
* elf32-m68k.c, * elf32-metag.c, * elf32-nds32.c, * elf32-nios2.c,
* elf32-ppc.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-spu.c,
* elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c,
* elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c,
* elf64-mmix.c, * elf64-s390.c, * elf64-sh64.c, * elf64-x86-64.c,
* elfcode.h, * elfcore.h, * elflink.c, * elfnn-aarch64.c,
* elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * ieee.c, * ihex.c, * mach-o.c, * merge.c, * mmo.c,
* peXXigen.c, * xcofflink.c: Replace use of Lx modifier with PRIx64,
and cast input to uint64_t, and similarly for Ld and Lu.
* bfd-in2.h: Regenerate.
|
|
First step towards compiler verification of _bfd_error_handler
arguments, and better verification of translated messages.
bfd/
* bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Handle %pA and %pB in place
of %A and %B.
* aout-adobe.c: Update all messages using %A and %B.
* aout-cris.c: Likewise.
* aoutx.h: Likewise.
* archive.c: Likewise.
* binary.c: Likewise.
* cache.c: Likewise.
* coff-alpha.c: Likewise.
* coff-arm.c: Likewise.
* coff-i860.c: Likewise.
* coff-mcore.c: Likewise.
* coff-ppc.c: Likewise.
* coff-rs6000.c: Likewise.
* coff-sh.c: Likewise.
* coff-tic4x.c: Likewise.
* coff-tic54x.c: Likewise.
* coff-tic80.c: Likewise.
* coff64-rs6000.c: Likewise.
* coffcode.h: Likewise.
* coffgen.c: Likewise.
* cofflink.c: Likewise.
* coffswap.h: Likewise.
* compress.c: Likewise.
* cpu-arm.c: Likewise.
* ecoff.c: Likewise.
* elf-attrs.c: Likewise.
* elf-eh-frame.c: Likewise.
* elf-ifunc.c: Likewise.
* elf-m10300.c: Likewise.
* elf-properties.c: Likewise.
* elf-s390-common.c: Likewise.
* elf.c: Likewise.
* elf32-arc.c: Likewise.
* elf32-arm.c: Likewise.
* elf32-avr.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-cr16.c: Likewise.
* elf32-cr16c.c: Likewise.
* elf32-cris.c: Likewise.
* elf32-crx.c: Likewise.
* elf32-d10v.c: Likewise.
* elf32-d30v.c: Likewise.
* elf32-epiphany.c: Likewise.
* elf32-fr30.c: Likewise.
* elf32-frv.c: Likewise.
* elf32-gen.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-i370.c: Likewise.
* elf32-i386.c: Likewise.
* elf32-i960.c: Likewise.
* elf32-ip2k.c: Likewise.
* elf32-iq2000.c: Likewise.
* elf32-lm32.c: Likewise.
* elf32-m32c.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-m68hc11.c: Likewise.
* elf32-m68hc12.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-m68k.c: Likewise.
* elf32-mcore.c: Likewise.
* elf32-mep.c: Likewise.
* elf32-metag.c: Likewise.
* elf32-microblaze.c: Likewise.
* elf32-moxie.c: Likewise.
* elf32-msp430.c: Likewise.
* elf32-mt.c: Likewise.
* elf32-nds32.c: Likewise.
* elf32-nios2.c: Likewise.
* elf32-or1k.c: Likewise.
* elf32-pj.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-rl78.c: Likewise.
* elf32-rx.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-score.c: Likewise.
* elf32-score7.c: Likewise.
* elf32-sh-symbian.c: Likewise.
* elf32-sh.c: Likewise.
* elf32-sh64.c: Likewise.
* elf32-sparc.c: Likewise.
* elf32-spu.c: Likewise.
* elf32-tic6x.c: Likewise.
* elf32-tilepro.c: Likewise.
* elf32-v850.c: Likewise.
* elf32-vax.c: Likewise.
* elf32-visium.c: Likewise.
* elf32-wasm32.c: Likewise.
* elf32-xgate.c: Likewise.
* elf32-xtensa.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-gen.c: Likewise.
* elf64-hppa.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-mmix.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elf64-sh64.c: Likewise.
* elf64-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.
* elfcode.h: Likewise.
* elfcore.h: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-ia64.c: Likewise.
* elfnn-riscv.c: Likewise.
* elfxx-mips.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-tilegx.c: Likewise.
* elfxx-x86.c: Likewise.
* hpux-core.c: Likewise.
* ieee.c: Likewise.
* ihex.c: Likewise.
* libbfd.c: Likewise.
* linker.c: Likewise.
* mach-o.c: Likewise.
* merge.c: Likewise.
* mmo.c: Likewise.
* oasys.c: Likewise.
* pdp11.c: Likewise.
* pe-mips.c: Likewise.
* peXXigen.c: Likewise.
* peicode.h: Likewise.
* reloc.c: Likewise.
* rs6000-core.c: Likewise.
* srec.c: Likewise.
* stabs.c: Likewise.
* vms-alpha.c: Likewise.
* xcofflink.c: Likewise.
ld/
* ldmisc.c (vfinfo): Handle %pA and %pB in place of %A and %B.
* ldcref.c: Update all messages using %A and %B.
* ldexp.c: Likewise.
* ldlang.c: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* pe-dll.c: Likewise.
* plugin.c: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/cr16elf.em: Likewise.
* emultempl/elf32.em: Likewise.
* emultempl/m68kcoff.em: Likewise.
* emultempl/m68kelf.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/nds32elf.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/sunos.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
|
|
harder to find a function name.
PR 22789
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): If the dwarf
functions failed to find the function name, try the generic elf
find function instead.
|
|
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
Update a stale reference to `mips_elf32_section_processing', following a
merge of the function into `_bfd_mips_elf_section_processing' made with
commit 103186c62b99 ("PATCH for MIPS 64-bit ABI suport"),
<https://sourceware.org/ml/binutils/1999-q3/msg00072.html>.
bfd/
* elfxx-mips.c (_bfd_mips_elf_final_link): Update a stale
`mips_elf32_section_processing' comment reference.
|
|
One of assertions in _bfd_mips_elf_final_link could be triggered by
a combination of input files and a linker script. This happens when
either the input doesn't contain .reginfo section or when this section
is oversized. This patch replaces the assertion with a more useful
error message.
* elfxx-mips.c (_bfd_mips_elf_final_link): Notify user when
.reginfo section has wrong size.
|
|
|
