Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
This is fussing about nothing really but since I was looking at signed
vs. unsigned issues, I decided to use the correct types here.
* elf32-ppc.c (ppc_elf_get_synthetic_symtab): Use size_t for vars.
* elf64-ppc.c (sym_exists_at): Use size_t for lo, hi and mid.
|
|
* elf-bfd.h (ELF_LOCAL_SYMBOL_HASH): Avoid signed overflow.
* elf32-hppa.c (final_link_relocate): Likewise.
* elf32-ppc.c (_bfd_elf_ppc_at_tls_transform): Likewise.
(_bfd_elf_ppc_at_tprel_transform, is_insn_ds_form): Likewise.
(is_insn_dq_form, ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ok_lo_toc_insn, ppc64_elf_edit_toc): Likewise.
(ppc64_elf_relocate_section): Likewise.
* elfxx-mips.c (mips_elf_perform_relocation): Likewise.
* netbsd.h (N_SET_FLAGS): Likewise.
|
|
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
|
|
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
|
|
This patch renames elf_backend_post_process_headers and moves the
prep_headers code into the new function. Naming the backend functions
elf_backend_init_file_header and elf_backend_modify_headers makes it
clear which function is called first.
* elf-bfd.h (struct elf_backend_data <elf_backend_init_file_header>):
Rename from elf_backend_post_process_headers.
(_bfd_elf_post_process_headers): Delete.
(_bfd_elf_init_file_header): Declare.
* elf.c (_bfd_elf_compute_section_file_positions): Call new function
in place of prep_headers and elf_backend_post_process_headers.
(_bfd_elf_init_file_header): Renamed from prep_headers with
updated args and made global. Delete dead code.
(_bfd_elf_post_process_headers): Delete.
* elf32-arm.c (elf32_arm_init_file_header): Rename from
elf32_arm_post_process_headers and call _bfd_elf_init_file_header.
Return status.
(elf_backend_init_file_header): Define.
(elf_backend_post_process_headers): Don't define.
* elf32-i386.c (elf_i386_fbsd_init_file_header): Similarly.
* elf32-m68hc1x.c (elf32_m68hc11_init_file_header): Similarly.
* elf32-metag.c (elf_metag_init_file_header): Similarly.
* elf32-spu.c (spu_elf_init_file_header
* elf32-visium.c (visium_elf_init_file_header
* elf64-alpha.c (elf64_alpha_fbsd_init_file_header
* elf64-hppa.c (elf64_hppa_init_file_header
* elf64-ia64-vms.c (elf64_vms_init_file_header
* elfnn-aarch64.c (elfNN_aarch64_init_file_header
* elfnn-ia64.c (elfNN_hpux_init_file_header
* elfxx-mips.c (_bfd_mips_init_file_header
* elfxx-mips.h (_bfd_mips_post_process_headers): Delete.
(_bfd_mips_init_file_header): Declare.
(elf_backend_post_process_headers): Delete.
(elf_backend_init_file_header): Define.
* elfxx-target.h (elf_backend_post_process_headers): Delete.
(elf_backend_init_file_header): Define and use.
* elf32-m68hc12.c (elf_backend_init_file_header): Define.
(elf_backend_post_process_headers): Don't define.
* elf32-m68hc1x.h (elf32_m68hc11_post_process_headers): Delete.
(elf32_m68hc11_init_file_header): Declare.
* elf32-ppc.c (elf_backend_post_process_headers): Remove
unnecessary undef.
|
|
ppc*_elf_tls_optimize decrements the PLT refcount for __tls_get_addr
when a GD or LD sequence can be optimized. Without tls marker relocs
this must be done when processing the argument setup relocations.
With marker relocs it's better done when processing the marker reloc.
But don't count them both ways.
Seen as "unresolvable R_PPC_REL24 relocation against symbol
`__tls_get_addr_opt'" (and other branch relocs).
* elf32-ppc.c (ppc_elf_tls_optimize): Don't process R_PPC_TLSLD
with non-local symbol. Don't double count __tls_get_addr calls
with marker relocs.
* elf64-ppc.c (ppc64_elf_tls_optimize): Likewise.
|
|
has_tls_get_addr_call is no longer named correctly as the flag is
only set on finding a __tls_get_addr call without tlsld/tlsgd marker
relocations.
* elf32-ppc.c (nomark_tls_get_addr): Rename from has_tls_get_addr_call
throughout.
* elf64-ppc.c (nomark_tls_get_addr): Likewise.
|
|
1) GOT entries generated for any of the GOT TLS relocations don't need
dynamic relocations for locally defined symbols in PIEs. In the case
of a tls_index doubleword, the dtpmod entry is known to be 1, and the
dtprel entry is also known at link time and relative. Similarly,
dtprel and tprel words are known at link time and relative. (GOT
entries for other than TLS symbols are not relative and thus need
dynamic relocations in PIEs.)
2) Local dynamic TLS code is really only meant for accesses local to
the current binary. There was a cheapskate test for this before using
the common tlsld_got slot, but the test wasn't exactly correct and
might confuse anyone looking at the code. The proper test,
SYMBOL_REFERENCES_LOCAL isn't so expensive that it should be avoided.
3) The same cheap test for local syms when optimising TLS sequences
should be SYMBOL_REFERENCES_LOCAL too.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Move initialisation of vars.
(ppc64_elf_tls_optimize): Correct is_local condition.
(allocate_got): Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot.
(ppc64_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
* elf32-ppc.c (ppc_elf_tls_optimize): Correct is_local condition.
(got_relocs_needed): Delete.
(allocate_dynrelocs): Correct validity test for local sym using
tlsld_got slot. Don't reserve dynamic relocations for any of the
tls got relocs in PIEs when the symbol is local.
(ppc_elf_size_dynamic_sections): Don't reserve dynamic relocations
for any of the tls got relocs in PIEs.
(ppc_elf_relocate_section): Correct validity test for local sym
using tlsld_got slot. Don't emit dynamic relocations for any of
the tls got relocs in PIEs when the symbol is local.
ld/
* testsuite/ld-powerpc/tlsso.d: Adjust to suit tlsld_got usage change.
* testsuite/ld-powerpc/tlsso.g: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.d: Likewise.
* testsuite/ld-powerpc/tlsso32.g: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This removes a restriction on various R_PPC_EMB relocations that has
been present for ppc32 since 1996-04-26 git commit e25a798839. As far
as I know, only those relocs that would require addressing via r2 for
.sdata2/.sbss2 access are disallowed in shared libraries.
PR 24697
* elf32-ppc.c (ppc_elf_check_relocs): Call bad_shared_reloc
when !bfd_link_executable for R_PPC_EMB_SDA2I16 and
R_PPC_EMB_SDA2REL. Don't call bad_shared_reloc for any other
reloc.
|
|
Given R_PPC_ADDR32 or R_PPC_UADDR32 relocs, this patch generates
R_PPC_ADDR32 or R_PPC_UADDR32 dynamic relocs from either type
depending on whether r_offset is 4-byte aligned, and similarly for
R_PPC_ADDR16/R_PPC_UADDR16.
* elf32-ppc.c (ppc_elf_relocate_section): Optimize unaligned relocs.
|
|
It's not as good as complaining in gas/config/obj-elf.c since you lose
any reference to the source file.
bfd/
* elf-bfd.h (struct elf_backend_data): Return bfd_boolean from
elf_backend_final_write_processing, don't pass linker arg.
(_bfd_elf_final_write_processing): Update prototype.
* elf.c (_bfd_elf_write_object_contents): Adjust call.
(_bfd_elf_final_write_processing): Return error on incompatible
OSABI and has_gnu_osabi. Remove linker arg.
* elf-nacl.h (nacl_final_write_processing): Update prototype.
* elf-vxworks.h (elf_vxworks_final_write_processing): Likewise.
* elfxx-mips.h (_bfd_mips_final_write_processing): Likewise.
(_bfd_mips_elf_final_write_processing): Likewise.
* elf-hppa.h (elf_hppa_final_write_processing): Return status
and remove linker arg.
* elf-m10300.c (_bfd_mn10300_elf_final_write_processing): Likewise.
* elf-nacl.c (nacl_final_write_processing): Likewise.
* elf-vxworks.c (elf_vxworks_final_write_processing): Likewise.
* elf32-arc.c (arc_elf_final_write_processing): Likewise.
* elf32-arm.c (arm_final_write_processing): Likewise.
(elf32_arm_final_write_processing): Likewise.
(elf32_arm_nacl_final_write_processing): Likewise.
(elf32_arm_vxworks_final_write_processing): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
* elf32-bfin.c (elf32_bfin_final_write_processing): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_final_write_processing): Likewise.
* elf32-cris.c (cris_elf_final_write_processing): Likewise.
* elf32-h8300.c (elf32_h8_final_write_processing): Likewise.
* elf32-lm32.c (lm32_elf_final_write_processing): Likewise.
* elf32-m32r.c (m32r_elf_final_write_processing): Likewise.
* elf32-m68k.c (elf_m68k_final_write_processing): Likewise.
* elf32-mips.c (mips_vxworks_final_write_processing): Likewise.
* elf32-msp430.c (bfd_elf_msp430_final_write_processing): Likewise.
* elf32-nds32.c (nds32_elf_final_write_processing): Likewise.
* elf32-or1k.c (or1k_elf_final_write_processing): Likewise.
* elf32-pj.c (pj_elf_final_write_processing): Likewise.
* elf32-ppc.c (ppc_final_write_processing): Likewise.
(ppc_elf_final_write_processing): Likewise.
(ppc_elf_vxworks_final_write_processing): Likewise.
* elf32-sparc.c (sparc_final_write_processing): Likewise.
(elf32_sparc_final_write_processing): Likewise.
(elf32_sparc_vxworks_final_write_processing): Likewise.
* elf32-v850.c (v850_elf_final_write_processing): Likewise.
* elf32-xc16x.c (elf32_xc16x_final_write_processing): Likewise.
* elf32-xtensa.c (elf_xtensa_final_write_processing): Likewise.
* elf64-ia64-vms.c (elf64_vms_final_write_processing): Likewise.
* elfnn-ia64.c (elfNN_ia64_final_write_processing): Likewise.
* elfxx-mips.c (_bfd_mips_final_write_processing): Likewise.
(_bfd_mips_elf_final_write_processing): Likewise.
gas/
* config/obj-elf.c (obj_elf_section, obj_elf_type): Set has_gnu_osabi.
* testsuite/gas/elf/section12a.d: Update xfails.
* testsuite/gas/elf/section12b.d: Likewise.
|
|
Move setting of OSABI to final_write_processing, after symbols are
written. This allows OSABI to be set based on symbols actually
written to the output rather than assuming input symbols will be
output.
Corrects object files such as the one generated on powerpc64le-linux
by ld-powerpc/pr23927.s which has a local STT_GNU_IFUNC symbol but
prior to this patch the file was marked ELFOSABI_NONE.
* elf-bfd.h (enum elf_gnu_osabi): Rename from elf_gnu_symbols.
Remove none, any, all enums.
(struct elf_obj_tdata): Rename has_gnu_symbols field to has_gnu_osabi.
(_bfd_elf_final_write_processing): Declare.
* elf.c (_bfd_elf_write_object_contents): Unconditionally call
elf_backend_final_write_processing.
(_bfd_elf_post_process_headers): Move body of function to..
(_bfd_elf_final_write_processing): ..here, but set EI_OSABI byte
only when not already set. Adjust for rename.
* elfxx-target.h (elf_backend_final_write_processing): Default to
_bfd_elf_final_write_processing.
* elf-hppa.h (elf_hppa_final_write_processing): Call
_bfd_elf_final_write_processing.
* elf-m10300.c (_bfd_mn10300_elf_final_write_processing): Likewise.
* elf-nacl.c (nacl_final_write_processing): Likewise.
* elf-vxworks.c (elf_vxworks_final_write_processing): Likewise.
* elf32-arc.c (arc_elf_final_write_processing): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
* elf32-bfin.c (elf32_bfin_final_write_processing): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_final_write_processing): Likewise.
* elf32-cris.c (cris_elf_final_write_processing): Likewise.
* elf32-h8300.c (elf32_h8_final_write_processing): Likewise.
* elf32-lm32.c (lm32_elf_final_write_processing): Likewise.
* elf32-m32r.c (m32r_elf_final_write_processing): Likewise.
* elf32-m68k.c (elf_m68k_final_write_processing): Likewise.
* elf32-msp430.c (bfd_elf_msp430_final_write_processing): Likewise.
* elf32-nds32.c (nds32_elf_final_write_processing): Likewise.
* elf32-or1k.c (or1k_elf_final_write_processing): Likewise.
* elf32-pj.c (pj_elf_final_write_processing): Likewise.
* elf32-v850.c (v850_elf_final_write_processing): Likewise.
* elf32-xc16x.c (elf32_xc16x_final_write_processing): Likewise.
* elf32-xtensa.c (elf_xtensa_final_write_processing): Likewise.
* elf64-ia64-vms.c (elf64_vms_final_write_processing): Likewise.
* elfnn-ia64.c (elfNN_ia64_final_write_processing): Likewise.
* elf32-arm.c (arm_final_write_processing): Split out from..
(elf32_arm_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(elf32_arm_nacl_final_write_processing): Adjust.
* elfxx-mips.c (_bfd_mips_final_write_processing): Split out from..
(_bfd_mips_elf_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
* elfxx-mips.h (_bfd_mips_final_write_processing): Declare.
* elf32-mips.c (mips_vxworks_final_write_processing): Adjust.
* elf32-ppc.c (ppc_final_write_processing): Split out from..
(ppc_elf_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(ppc_elf_vxworks_final_write_processing): Adjust.
* elf32-sparc.c (sparc_final_write_processing): Split out from..
(elf32_sparc_final_write_processing): ..here. Call
_bfd_elf_final_write_processing.
(elf32_sparc_vxworks_final_write_processing): Adjust.
* elf32-d10v.c (elf_backend_final_write_processing): Don't define.
* elf32-d30v.c (elf_backend_final_write_processing): Don't define.
* elf32-m68hc11.c (elf_backend_final_write_processing): Don't define.
* elf32-m68hc12.c (elf_backend_final_write_processing): Don't define.
* elf32-s12z.c (elf_backend_final_write_processing): Don't define.
* elf32-i386.c (elf_i386_check_relocs): Don't set has_gnu_symbols.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (elf_link_add_object_symbols): Likewise.
(elf_link_output_symstrtab): Set has_gnu_osabi for symbols here
instead.
|
|
Choose a better name, that reflects why the flag is set (GD to IE
optimisation) rather than what the flag produces (TPREL64 reloc on
a single GOT entry replacing a tls_index pair).
* elf32-ppc.c (TLS_GDIE): Rename from TLS_TPRELGD throughout file.
Correct comment.
* elf64-ppc.c (TLS_GDIE): Likewise.
|
|
It is possible to create shared libraries on PowerPC using
-ftls-model=inital-exec or -ftls-model=local-exec. The first is half
reasonable, getting you a shared library that can't be dlopen'd but
otherwise is reasonable. The second is quite bad. Not only do you
lose being able to dlopen, the library also has dynamic text
relocations. Worse, the TPREL16_LO, TPREL16_HA and other TPREL16
dynamic relocs emitted were wrong, resulting in wrong values being
applied by ld.so.
Using the first TLS section symbol in dynamic relocations for local
TLS symbols doesn't work. It's wrong because TLS symbols used by TLS
relocs have values relative to the TLS segment, whereas the TLS
section symbols are addresses. This patch instead uses a symbol index
of zero which is used elsewhere by PowerPC on dynamic TLS relocs.
It's not strictly ABI compliant to use a non-TLS symbol with TLS
relocs but symbol index zero can be interpreted as "no symbol". Not
using the first TLS section symbol means it doesn't need to be dynamic.
The patch also fixes a further problem with PowerPC32 dynamic TPREL16*
relocs, which shouldn't have the symbol value in the addend as we do
for non-TLS symbols.
bfd/
* elflink.c (_bfd_elf_omit_section_dynsym_default): Don't keep
tls_sec.
(_bfd_elf_init_1_index_section): Prefer not using TLS sections.
(_bfd_elf_init_2_index_sections): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): When emitting dynamic
relocations for local TLS symbols, use STN_UNDEF as the relocation
symbol.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise, and don't
leave TLS symbol value in the addend.
ld/
* testsuite/ld-powerpc/tlsso.r: Update.
* testsuite/ld-powerpc/tlsso32.g: Update.
* testsuite/ld-powerpc/tlsso32.r: Update.
* testsuite/ld-powerpc/tlstocso.r: Update.
* testsuite/ld-cris/tls-dso-dtpoffd2.d: Update.
* testsuite/ld-cris/tls-dso-dtpoffd4.d: Update.
* testsuite/ld-cris/tls-dso-tpoffgotcomm1.d: Update.
* testsuite/ld-cris/tls-gd-1.d: Update.
* testsuite/ld-cris/tls-gd-1h.d: Update.
* testsuite/ld-cris/tls-gd-2.d: Update.
* testsuite/ld-cris/tls-gd-2h.d: Update.
* testsuite/ld-cris/tls-ie-10.d: Update.
* testsuite/ld-cris/tls-ie-11.d: Update.
* testsuite/ld-cris/tls-ie-8.d: Update.
* testsuite/ld-cris/tls-ie-9.d: Update.
* testsuite/ld-cris/tls-js1.d: Update.
* testsuite/ld-cris/tls-ld-4.d: Update.
* testsuite/ld-cris/tls-ld-5.d: Update.
* testsuite/ld-cris/tls-ld-6.d: Update.
* testsuite/ld-cris/tls-ld-7.d: Update.
* testsuite/ld-cris/tls-ldgd-14.d: Update.
* testsuite/ld-cris/tls-ldgd-15.d: Update.
* testsuite/ld-cris/tls-ldgdx-14.d: Update.
* testsuite/ld-cris/tls-ldgdx-15.d: Update.
* testsuite/ld-cris/tls-local-54.d: Update.
* testsuite/ld-cris/tls-local-60.d: Update.
* testsuite/ld-cris/tls-local-61.d: Update.
* testsuite/ld-cris/tls-local-63.d: Update.
* testsuite/ld-cris/tls-local-64.d: Update.
* testsuite/ld-cris/tls-ok-30.d: Update.
* testsuite/ld-cris/tls-ok-32.d: Update.
* testsuite/ld-cris/tls-ok-34.d: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.got: Update.
* testsuite/ld-mips-elf/tls-multi-got-1.r: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: Update.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-hidden.got: Update.
* testsuite/ld-mips-elf/tlslib-o32-ver.got: Update.
* testsuite/ld-mips-elf/tlslib-o32.got: Update.
* testsuite/ld-s390/tlspic.rd: Update.
* testsuite/ld-s390/tlspic_64.rd: Update.
* testsuite/ld-sparc/tlssunnopic32.rd: Update.
* testsuite/ld-sparc/tlssunnopic64.rd: Update.
* testsuite/ld-sparc/tlssunpic32.rd: Update.
* testsuite/ld-sparc/tlssunpic64.rd: Update.
|
|
PR 24785
* elf32-ppc.c (_bfd_elf_ppc_set_arch): Sanity check .PPC.EMB.apuinfo
size before reading first word.
|
|
PR 24697
* elf32-ppc.c (ppc_elf_relocate_section): Don't read insn for
R_PPC_EMB_RELSDA. Mask low bit of R_PPC_EMB_SDA21 r_offset.
|
|
Instead of BFD_ASSERT (h != NULL) with
ld: BFD ... assertion fail .../bfd/elf64-x86-64.c:2562
ld: bad.o: invalid string offset 50331648 >= 371 for section `nterp'
check corrupt VTENTRY entry in bfd_elf_gc_record_vtentry with
ld: bad.o: section 'g': corrupt VTENTRY entry
* elf-m10300.c (mn10300_elf_check_relocs): Remove BFD_ASSERT of
"h != NULL". Don't check "h != NULL" before calling.
bfd_elf_gc_record_vtentry.
* elf32-arm.c (elf32_arm_check_relocs): Likewise.
* elf32-bfin.c (bfin_check_relocs): Likewise.
* elf32-cris.c (cris_elf_check_relocs): Likewise.
* elf32-csky.c (csky_elf_check_relocs): Likewise.
* elf32-d10v.c (elf32_d10v_check_relocs): Likewise.
* elf32-dlx.c (elf32_dlx_check_relocs): Likewise.
* elf32-fr30.c (fr30_elf_check_relocs): Likewise.
* elf32-frv.c (elf32_frv_check_relocs): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Likewise.
* elf32-iq2000.c (iq2000_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-mcore.c (mcore_elf_check_relocs): Likewise.
* elf32-metag.c (elf_metag_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-v850.c (v850_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Likewise.
* elf32-xstormy16.c (xstormy16_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-mmix.c (mmix_elf_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
* elf64-x86-64.c (elf_s390_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
* elflink.c (bfd_elf_gc_record_vtinherit): Check for corrupt
VTENTRY entry.
|
|
This one looks to be a bug going back to 2009, git commit e054468f6c
"STT_GNU_IFUNC support for PowerPC". That bug was carried over with
git commit 49c09209d0 "Rearrange PLT reloc output on powerpc".
If the refcount for an ifunc local sym plt entry was zero,
ppc_elf_size_dynamic_sections would correctly set plt.offset to -1 but
leave glink_offset uninitialized. That leads to occasional segfaults
(which can be made solid with MALLOC_PERTURB_=1 when using glibc).
So, guard the write_glink_stub call with plt.offset != -1. Also,
remove the totally ineffective attempt at writing multiple-use glink
stubs only once.
PR 24355
* elf32-ppc.c (ppc_finish_symbols): Don't call write_glink_stub
for local iplt syms with ent->plt.offset == -1. Remove ineffective
attempt at writing glink stubs only once.
|
|
This was always supposed to be an error. Code emitted by gcc for
inline PLT calls assumes PLT is an array of addresses.
* elf32-ppc.c (ppc_elf_relocate_section): Add %X to "unsupported
for bss-plt" warning to make it an error.
|
|
|
|
All of the backend relocate_section functions that interpret reloc
numbers assuming the input file is of the expected type (ie. same as
output or very similar) really ought to be checking input file type.
Not many do, and those that do currently just assert. This patch
replaces the assertion with a more graceful exit.
PR 23980
* elf32-i386.c (elf_i386_relocate_section): Exit with wrong format
error rather than asserting input file is as expected.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
* elf32-xtensa.c (elf_xtensa_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Exit with wrong format
error if input file is not ppc32 ELF.
|
|
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
|
|
This PR shows a fuzzed binary triggering a segfault via a bad
relocation in .debug_line. It turns out that unlike normal
relocations applied to a section, the linker applies those with
symbols from discarded sections via _bfd_clear_contents without
checking that the relocation is within the section bounds. The same
thing now happens when reading debug sections since commit
a4cd947aca23, the PR23425 fix.
PR 23770
PR 23425
* reloc.c (_bfd_clear_contents): Replace "location" param with
"buf" and "off". Bounds check "off". Return status.
* cofflink.c (_bfd_coff_generic_relocate_section): Update
_bfd_clear_contents call.
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Likewise.
* elf32-arc.c (elf_arc_relocate_section): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-metag.c (metag_final_link_relocate): Likewise.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
* elf32-visium.c (visium_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-x86-64.c *(elf_x86_64_relocate_section): Likewise.
* libbfd-in.h (_bfd_clear_contents): Update prototype.
* libbfd.h: Regenerate.
|
|
These take up far too many lines in the files. This patch introduces
a replacement for the HOWTO macro that simplifies the relow howto
initialization. Apart from the two relocs mentioned in the ChangeLog,
no relocation howto is changed.
* elf64-ppc.c (HOW): Define.
(ONES): Delete.
(ppc64_elf_howto_raw): Use HOW to initialize entries.
* elf32-ppc.c (HOW): Define.
(ppc_elf_howto_raw): Use HOW to initialize entries, updating
R_PPC_VLE_REL15 and R_PPC_VLE_REL24 to use bitpos=0.
|
|
One of the ill effects of ld -r is to mash together sections. That
can result in reduced icache performance at runtime due to unexpected
movement of code. Another problem is that sections can become too
large to link on targets that have limited relative addressing. ld -r
--relax attempts to overcome the large section problem for branches by
inserting trampolines, but the powerpc support added lots of
unnecessary trampolines. This patch trims them somewhat.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Ignore common or undef locals.
Avoid trashing toff with added when used as a symbol index.
Ignore R_PPC_PLTREL24 addends in unused example code. Avoid
creating unnecessary fixups when relocatable.
ld/
* testsuite/ld-powerpc/big.s: New file.
* testsuite/ld-powerpc/relaxrl.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new test.
* testsuite/ld-powerpc/relaxr.d: Adjust.
|
|
Extends commit 898ade12ee8 to cover other targets.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Disable
-Wstringop-truncation warning for gcc-8.0 too.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Comment fix.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
|
|
Fixes a number of build errors like the following
.../elf32-arm.c: In function 'elf32_arm_nabi_write_core_note':
.../elf32-arm.c:2177: error: #pragma GCC diagnostic not allowed inside functions
.../elf32-arm.c:2186: error: #pragma GCC diagnostic not allowed inside functions
See the comment in diagnostics.h.
include/
* diagnostics.h: Comment on macro usage.
bfd/
* elf32-arm.c (elf32_arm_nabi_write_core_note): Don't use
DIAGNOTIC_PUSH and DIAGNOSTIC_POP unconditionally.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
|
|
And report the two input files that are incompatible rather than
reporting that an input file is incompatible with the output.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Update prototype.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Return error
on mismatch. Remove "warning: " from messages. Track last bfd
used to set tags.
(ppc_elf_merge_obj_attributes): Likewise. Handle status from
_bfd_elf_ppc_merge_fp_attributes.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Handle status
from _bfd_elf_ppc_merge_fp_attributes.
ld/
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update expected output.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-12-21.d: Likewise.
|
|
.gnu.attributes entries from linker input files are merged to the
output file, the output having the union of compatible input
attributes. Incompatible attributes generally cause a linker error
and no output. However in some cases only a warning is emitted, and
one of the incompatible input attributes is passed on to the output.
PowerPC tends to emit warnings rather than errors, and the output
takes the first input attribute. For example, if we have two input
files with Tag_GNU_Power_ABI_FP, the first with a value signifying
"double-precision hard float, IBM long double", the second with a
value signifying "double-precision hard float, IEEE long double",
we'll get a warning about incompatible long double types and the
output will say "double-precision hard float, IBM long double".
The output attribute of course isn't correct. It would be correct to
specify "IBM and IEEE long double", but we don't have a way to
represent that currently. While it would be possible to extend the
encoding, there isn't much gain in doing so. A shared library
providing support for both long double types should link against
objects using either long double type without warning or error. That
is what you'd get if such a shared library had no Tag_GNU_Power_ABI_FP
attribute.
So this patch provides a way for the backend to omit .gnu.attributes
tags from the output.
* elf-bfd.h (ATTR_TYPE_FLAG_ERROR, ATTR_TYPE_HAS_ERROR): Define.
* elf-attrs.c (is_default_attr): Handle ATTR_TYPE_HAS_ERROR.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Use
ATTR_TYPE_FLAG_INT_VAL. Set ATTR_TYPE_HAS_ERROR on finding
incompatible attribute.
(ppc_elf_merge_obj_attributes): Likewise. Return
_bfd_elf_merge_object_attributes result.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Return
_bfd_elf_merge_object_attributes result.
|
|
GCC 8.1 warns about destination size with -Wstringop-truncation:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643
Use DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION to silence it.
bfd/
PR binutils/23146
* bfd-in.h: Include "diagnostics.h".
* bfd-in2.h: Regenerated.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Use
DIAGNOSTIC_PUSH, DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION and
DIAGNOSTIC_POP to silence GCC 8.1 warnings with
-Wstringop-truncation.
* elf32-ppc.c (ppc_elf_write_core_note): Likewse.
* elf32-s390.c (elf_s390_write_core_note): Likewse.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewse.
* elf64-s390.c (elf_s390_write_core_note): Likewse.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewse.
include/
* diagnostics.h (DIAGNOSTIC_IGNORE_STRINGOP_TRUNCATION): Always
define for GCC.
|
|
Take STT_GNU_IFUNC handling scattered across targets and gather it in
the generic ELF linker.
bfd/
PR ld/23238
* elf-s390-common.c (elf_s390_add_symbol_hook): Removed.
* elf32-arc.c (elf_arc_add_symbol_hook): Likewise.
(elf_backend_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
(elf_backend_add_symbol_hook): Likewise.
* elf32-s390.c (elf_backend_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
(elf_backend_add_symbol_hook): Likewise.
* elf64-s390.c (elf_backend_add_symbol_hook): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elfxx-aarch64.h (_bfd_aarch64_elf_add_symbol_hook): Likewise.
(elf_backend_add_symbol_hook): Likewise.
* elf32-arm.c (elf32_arm_add_symbol_hook): Remove STT_GNU_IFUNC
handling.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elflink.c (elf_link_add_object_symbols): Set
elf_gnu_symbol_ifunc for STT_GNU_IFUNC symbols.
ld/
PR ld/23238
* testsuite/ld-ifunc/ifunc-26.d: New file.
* testsuite/ld-ifunc/ifunc-26.s: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Run *.d tests without a
working compiler.
|
|
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings.
Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a
number of the places patched here, (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have
recent glibc headers installed you'll need to configure binutils with
--disable-werror to compile using gcc8 or gcc9.
include/
* ansidecl.h: Import from gcc.
* coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING
to s_name.
(struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name.
bfd/
* elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32),
(struct elf_external_linux_prpsinfo32_ugid16),
(struct elf_external_linux_prpsinfo64_ugid32),
(struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING
to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas.
Move comment to..
* elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor
directives.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING
to data.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic
pragmas.
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid
false positive gcc-8 warning.
gas/
* config/obj-evax.c (shorten_identifier): Use memcpy in place
of strncpy.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure
segname and sectname fields are NUL terminated.
|
|
When IBM long double is used, the .gnu_attribute 4 is set to 1 | (1 *
4). IEEE long double sets the same .gnu_attribute to 1 | (3 * 4).
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Fix the order
of arguments when warning about different long double types.
|
|
Two of the gcc ifunc tests fail for ppc32, due to my pr22374 fix being
a little too enthusiastic in trimming PLT entries. ppc64 doesn't have
the same failures because ppc64_elf_check_relocs happens to set
needs_plt for any ifunc reloc.
PR 23123
PR 22374
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Don't drop plt
relocs for ifuncs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Comment fixes.
|
|
max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
|
|
The default max-page-size on ppc32 has been 64k since 1995-02-15 (git
commit bcbe2c71). There was a change committed 2003-07-12 to chose a
4k page if __QNXTARGET__ is defined, but that particular commit was
from an earlier posted patch
https://sourceware.org/ml/binutils/2003-07/msg00211.html that only
made the change effective for arm, rather than the later one
https://sourceware.org/ml/binutils/2003-07/msg00220.html that also
changed powerpc and sh..
Since the __QNXTARGET__ #ifdef in elf32-ppc.c is ineffective unless
the user defines it in his or her CFLAGS, I'm removing that code.
* elf32-ppc.c (ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Don't depend
on __QNXTARGET__ define.
|
|
This patch adds the analysis part of PLT call optimization, enabling
the code added with the previous patch that actually performs the
optimization.
Gold support is not available yet.
bfd/
* elf64-ppc.c (struct _ppc64_elf_section_data): Add has_pltcall field.
(struct ppc_link_hash_table): Add can_convert_all_inline_plt.
(ppc64_elf_check_relocs): Set has_pltcall.
(ppc64_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc64_elf_inline_plt): New function.
(ppc64_elf_size_dynamic_sections): Discard some PLT entries for locals.
* elf64-ppc.h (ppc64_elf_inline_plt): Declare.
* elf32-ppc.c (has_pltcall): Define.
(struct ppc_elf_link_hash_table): Add can_convert_all_inline_plt.
(ppc_elf_check_relocs): Set has_pltcall.
(ppc_elf_inline_plt): New function.
(ppc_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc_elf_size_dynamic_sections): Likewise.
* elf32-ppc.h (ppc_elf_inline_plt): Declare.
ld/
* emultempl/ppc64elf.em (no_inline_plt): New var.
(ppc_before_allocation): Call ppc64_elf_inline_plt.
(enum ppc64_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
* emultemps/ppc32elf.em (no_inline_opt): New var.
(prelim_size_sections): New function, extracted from..
(ppc_before_allocation): ..here. Call ppc_elf_inline_plt.
(enum ppc32_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
|
|
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
|
|
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
|
|
The current scheme where we output PLT relocs for global symbols in
finish_dynamic_symbol, and PLT relocs for local symbols when
outputting stubs does not work if PLT entries are to be used for
inline PLT sequences against non-dynamic globals or local symbols.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Move output of PLT relocs
for local symbols to..
(write_plt_relocs_for_local_syms): ..here. New function.
(ppc64_elf_finish_dynamic_symbol): Move output of PLT relocs for
global symbols to..
(build_global_entry_stubs_and_plt): ..here. Rename from
build_global_entry_stubs.
(ppc64_elf_build_stubs): Always call build_global_entry_stubs_and_plt.
Call write_plt_relocs_for_local_syms.
* elf32-ppc.c (get_sym_h): New function.
(ppc_elf_relax_section): Use get_sym_h.
(ppc_elf_relocate_section): Move output of PLT relocs and glink
stubs for local symbols to..
(ppc_finish_symbols): ..here. New function.
(ppc_elf_finish_dynamic_symbol): Move output of PLT relocs for
global syms to..
(write_global_sym_plt): ..here. New function.
* elf32-ppc.h (ppc_elf_modify_segment_map): Delete attribute.
(ppc_finish_symbols): Declare.
ld/
* ppc32elf.em (ppc_finish): Call ppc_finish_symbols.
|
|
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined. The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry". It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section. The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section. Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address. However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up. Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.
This patch supports PLT16 relocations using these semantics. This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported. I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
(ppc64_elf_relocate_section): Likewise. Correct PLT16
resolution to plt entry relative to toc pointer.
gold/
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
|
|
It is possible to construct indirect calls to __tls_get_addr in
assembly that confuse TLS optimization. (PowerPC gcc doesn't support
such calls, ignoring -mlongcall for __tls_get_addr.) This patch fixes
the problem by requiring a TLSLD or TLSGD marker reloc before any insn
in an indirect call to __tls_get_addr will be optimized. They also
need additional marker relocs defined in a later patch, so don't
expect the optimization to work just yet. The point here is to
prevent mis-optimization of indirect calls without any marker relocs.
The presense of a marker reloc is tracked by a new bit in the tls_mask
field of ppc_link_hash_entry and the corresponding lgot_masks unsigned
char array for local symbols. Since the field is only 8 bits, we've
run out of space. However, tracking TLS use for variables, and
tracking IFUNC for functions are independent, and bits can be reused.
TLS_TLS is always set for TLS usage, so can be used to select the
meaning of the other bits. This patch does that even for elf32-ppc.c
which hasn't yet run out of space in the field.
* elf64-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD, TLS_EXPLICIT): Renumber. Test TLS_TLS throughout
file when other TLS flags are tested in a mask.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc64_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(get_tls_mask): Do toc lookup if tls_mask is just TLS_MARK.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.
* elf32-ppc.c (TLS_TLS, TLS_GD, TLS_LD, TLS_TPREL, TLS_DTPREL,
TLS_TPRELGD): Renumber. Update comment.
(TLS_MARK, NON_GOT): Define.
(PLT_IFUNC): Redefine, and test TLS_TLS throughout file as well.
(update_local_sym_info): Don't create got entry when NON_GOT.
(ppc_elf_check_relocs): Pass NON_GOT with PLT_IFUNC.
Set TLS_MARK.
(ppc_elf_tls_optimize): Don't attempt to optimize indirect
__tls_get_addr calls lacking a marker reloc.
|
|
Local symbols were being read but not used.
* elf32-ppc.c (ppc_elf_tls_optimize): Delete locsyms.
|
|
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Make tls_mask
field unsigned.
(update_local_sym_info): Likewise for local_got_tls_masks.
(ppc_elf_tls_optimize): Likewise for lgot_masks.
|
|
* elf64-ppc.c (ppc64_elf_relocate_section): Don't access rel[1]
without first checking array bounds.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
|
|
result. Stop strip from completeing if one of these functions fails.
bfd PR 22875
* elf-bfd.h (struct elf_backend_data): Change the return type of
the elf_info_to_howto and elf_info_to_howto_rel function pointers
to bfd_boolean.
* elfcode.h (elf_slurp_reloc_table_from_section): Check the return value from the info_to_howto function and fail if that function failed.
* elf32-h8300.c (elf32_h8_relocate_section): Check return value from the info_to_howto function.
(elf32_h8_relax_section): Likewise.
* elf32-lm32.c (lm32_elf_relocate_section): Likewise.
* elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise.
* elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise.
* elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise.
* elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise.
* elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise.
* elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Likewise.
* elf64-x86-64.c (elf_x86_64_tls_transition): Likewise.
* elfnn-ia64.c (elfNN_ia64_relocate_section): Likewise.
* elfnn-riscv.c (riscv_elf_check_relocs): Likewise.
(riscv_elf_relocate_section): Likewise.
* elf-hppa.h (elf_hppa_info_to_howto): Change return type to
bfd_boolean. Issue an error message, set an error value and
return FALSE if the reloc is not recognized.
(elf_hppa_info_to_howto_rel): Likewise.
* elf-m10200.c (mn10200_info_to_howto): Likewise.
* elf-m10300.c (mn10300_info_to_howto): Likewise.
* elf.c (_bfd_elf_no_info_to_howto): Likewise.
* elf32-arc.c (arc_info_to_howto_rel): Likewise.
* elf32-arm.c (elf32_arm_info_to_howto): Likewise.
* elf32-avr.c (avr_info_to_howto_rela): Likewise.
* elf32-bfin.c (bfin_info_to_howto): Likewise.
* elf32-cr16.c (elf_cr16_info_to_howto): Likewise.
* elf32-cr16c.c (elf_cr16c_info_to_howto): Likewise.
* elf32-cris.c (elf_cr16c_info_to_howto_rel, cris_info_to_howto_rela): Likewise.
* elf32-crx.c (elf_crx_info_to_howto): Likewise.
* elf32-d10v.c (d10v_info_to_howto_rel): Likewise.
* elf32-d30v.c (d30v_info_to_howto_rel, d30v_info_to_howto_rela): Likewise.
* elf32-dlx.c (dlx_rtype_to_howto, elf32_dlx_info_to_howto, elf32_dlx_info_to_howto_rel): Likewise.
* elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise.
* elf32-fr30.c (fr30_info_to_howto_rela): Likewise.
* elf32-frv.c (frv_info_to_howto_rela, frvfdpic_info_to_howto_rel): Likewise.
* elf32-ft32.c (ft32_info_to_howto_rela): Likewise.
* elf32-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise.
* elf32-h8300.c (elf32_h8_info_to_howto, elf32_h8_info_to_howto_rel): Likewise.
* elf32-i370.c (i370_elf_info_to_howto): Likewise.
* elf32-i386.c (elf_i386_reloc_type_lookup, elf_i386_rtype_to_howto, elf_i386_info_to_howto_rel): Likewise.
* elf32-i860.c (lookup_howto, elf32_i860_info_to_howto_rela): Likewise.
* elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise.
* elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise.
* elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise.
* elf32-lm32.c (lm32_info_to_howto_rela): Likewise.
* elf32-m32c.c (m32c_info_to_howto_rela): Likewise.
* elf32-m32r.c (m32r_info_to_howto_rel, m32r_info_to_howto): Likewise.
* elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise.
* elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise.
* elf32-m68k.c (rtype_to_howto): Likewise.
* elf32-mcore.c (mcore_elf_info_to_howto): Likewise.
* elf32-mep.c (mep_info_to_howto_rela): Likewise.
* elf32-metag.c (metag_info_to_howto_rela): Likewise.
* elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise.
* elf32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise.
* elf32-moxie.c (moxie_info_to_howto_rela): Likewise.
* elf32-msp430.c (msp430_info_to_howto_rela): Likewise.
* elf32-mt.c (mt_info_to_howto_rela): Likewise.
* elf32-nds32.c (nds32_info_to_howto_rel, nds32_info_to_howto): Likewise.
* elf32-nios2.c (nios2_elf32_info_to_howto): Likewise.
* elf32-or1k.c (or1k_info_to_howto_rela): Likewise.
* elf32-pj.c (pj_elf_info_to_howto): Likewise.
* elf32-ppc.c (ppc_elf_info_to_howto): Likewise.
* elf32-pru.c (pru_elf32_info_to_howto): Likewise.
* elf32-rl78.c (rl78_info_to_howto_rela): Likewise.
* elf32-rx.c (rx_info_to_howto_rela): Likewise.
* elf32-s390.c (elf_s390_info_to_howto): Likewise.
* elf32-score.c (s3_bfd_score_info_to_howto, _bfd_score_info_to_howto): Likewise.
* elf32-score7.c (s7_bfd_score_info_to_howto): Likewise.
* elf32-sh.c (sh_elf_info_to_howto): Likewise.
* elf32-spu.c (spu_elf_info_to_howto): Likewise.
* elf32-tic6x.c (elf32_tic6x_info_to_howto, elf32_tic6x_info_to_howto_rel): Likewise.
* elf32-tilepro.c (tilepro_info_to_howto_rela): Likewise.
* elf32-v850.c (v850_elf_info_to_howto_rel, v850_elf_info_to_howto_rela, v800_elf_info_to_howto): Likewise.
* elf32-vax.c (rtype_to_howto): Likewise.
* elf32-visium.c (visium_info_to_howto_rela): Likewise.
* elf32-wasm32.c (elf32_wasm32_rtype_to_howto, elf32_wasm32_info_to_howto_rela): Likewise.
* elf32-xc16x.c (elf32_xc16x_info_to_howto): Likewise.
* elf32-xgate.c (xgate_info_to_howto_rel): Likewise.
* elf32-xstormy16.c (xstormy16_info_to_howto_rela): Likewise.
* elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise.
* elf64-alpha.c (elf64_alpha_info_to_howto): Likewise.
* elf64-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise.
* elf64-ia64-vms.c (elf64_ia64_info_to_howto): Likewise.
* elf64-mips.c (mips_elf64_info_to_howto_rela): Likewise.
* elf64-mmix.c (mmix_info_to_howto_rela): Likewise.
* elf64-ppc.c (ppc64_elf_info_to_howto): Likewise.
* elf64-s390.c (elf_s390_reloc_type_lookup): Likewise.
* elf64-sh64.c (elf_s390_info_to_howto, sh_elf64_info_to_howto): Likewise.
* elf64-x86-64.c (elf_x86_64_info_to_howto): Likewise.
* elfn32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_info_to_howto): Likewise.
* elfnn-ia64.c (elfNN_ia64_info_to_howto): Likewise.
* elfnn-riscv.c (riscv_info_to_howto_rela): Likewise.
* elfxx-ia64.c (ia64_elf_reloc_type_lookup): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_info_to_howto): Likewise.
* elfxx-tilegx.c (tilegx_info_to_howto_rela): Likewise.
* elf32-score.h (s7_bfd_score_info_to_howto): Update prototype.
* elfxx-sparc.h (_bfd_sparc_elf_info_to_howto): Update prototype.
* elfxx-tilegx.h (tilegx_info_to_howto_rela): Update prototype.
* elfxx-target.h (elf_info_to_howto, elf_info_to_howto_rel): Default to NULL.
binutils PR 22875
* objcopy.c (copy_object): Check the error status after marking symbols used in relocations.
* testsuite/binutils-all/strip-13.s: New test source file.
* testsuite/binutils-all/strip-13.s: New test driver file.
* testsuite/binutils-all/objcopy.exp: Run the new test.
|
|
It must get boring translating all the variants we have of
unrecognized/unsupported/invalid/unexpected reloc number. This patch
cuts down on the number of variations.
* aoutx.h, * coff-alpha.c, * coff-i860.c, * coff-m68k.c,
* coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c,
* coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-w65.c,
* elf-bfd.h, * elf-m10300.c, * elf.c, * elf32-avr.c, * elf32-bfin.c,
* elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c,
* elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
* elf32-fr30.c, * elf32-frv.c, * elf32-i370.c, * elf32-i386.c,
* elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c,
* elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c,
* elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c,
* elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c,
* elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-or1k.c,
* elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c,
* elf32-s390.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c,
* elf32-xgate.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c,
* elfnn-riscv.c, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-riscv.h,
* elfxx-sparc.c, * elfxx-sparc.h, * reloc.c: Standardize
unrecognized/unsupported reloc message.
|
|
The GNU coding standard says error messages should be of the form
program:sourcefile:lineno: message
or
program: message
and
"The string message should not begin with a capital letter when it
follows a program name and/or file name, because that isn’t the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period."
This patch does that for ppc, and removes some British spelling.
I've also switched some error output from using the linker callback
einfo to _bfd_error_handler, due to improved compilation time
argument checking now done for the latter function.
bfd/
* elf32-ppc.c: Standardize error/warning messages. Use
_bfd_error_handler rather than einfo when einfo features not used.
* elf64-ppc.c: Likewise.
ld/
* testsuite/ld-powerpc/attr-gnu-12-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Update.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
|