aboutsummaryrefslogtreecommitdiff
path: root/bfd/elf.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-11Fix some places where octet to byte conversions are needed.Dan Gissel1-1/+12
PR 19713 * elf.c (_bfd_elf_section_offset): Ensure that the returned offset uses bytes not octets. * elflink.c (resolve_section): Likewise. Add a bfd parameter. (eval_section): Pass the input_bfd to resolve_section. (bfd_elf_perform_complex_relocation): Convert byte offset to octets before read and writing values. (elf_link_input_bfd): Add byte to octet conversions. (elf_reloc_link_order): Likewise. (elf_fixup_link_order): Likewise. (bfd_elf_final_link): Likewise. * reloc.c (_bfd_final_link_relocate): Likewise. * syms.c (_bfd_stab_section_find_nearest_line): Likewise.
2016-02-26Properly implement STT_COMMONH.J. Lu1-6/+10
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-02Clear HAS_RELOC if there are no relocationsH.J. Lu1-0/+9
The HAS_RELOC bit should be cleared when relocations are removed from relocatable files. bfd/ PR binutils/19547 * elf.c (assign_section_numbers): Clear HAS_RELOC if there are no relocations in relocatable files. binutils/ PR binutils/19547 * testsuite/binutils-all/objcopy.exp (objcopy_test_without_global_symbol): New proc. Run objcopy_test_without_global_symbol. * testsuite/binutils-all/pr19547.c: New file.
2016-01-21Convert macros in elf-linux-core.h to inline functionsAlan Modra1-6/+2
Besides changing some macros into inline functions, this removes redundant memsets and uses bfd_put_* rather than H_PUT_*. * elf-linux-core.h (swap_linux_prpsinfo32_out): New function. (swap_linux_prpsinfo64_out): New function. (LINUX_PRPSINFO32_SWAP_FIELDS): Delete. (LINUX_PRPSINFO64_SWAP_FIELDS): Delete. * elf.c (elfcore_write_linux_prpsinfo32): Adjust. Don't memset. (elfcore_write_linux_prpsinfo64): Likewise. * elf32-ppc.c (swap_ppc_linux_prpsinfo32_out): New function. (PPC_LINUX_PRPSINFO32_SWAP_FIELDS): Delete. (elfcore_write_ppc_linux_prpsinfo32): Adjust. Don't memset.
2016-01-21Rename elf-linux-psinfo.h to elf-linux-core.hAlan Modra1-1/+1
Since it will sometime have more than just prpsinfo. Also, elf32-ppc.c needlessly includes this header. * elf-linux-core.h: Rename from elf-linux-psinfo.h. * elf.c: Adjust #include. * elf32-ppc.c: Don't #include elf-linux-psinfo.h * Makefile.am (SOURCE_HFILES): Update. * Makefile.in: Regenerate. * po/SRC-PORFILES.in: Regenerate.
2016-01-19Add a pseudosection for the NT_FREEBSD_THRMISC note.John Baldwin1-0/+7
bfd/ChangeLog: * elf.c (elfcore_grok_note): Recognize NT_FREEBSD_THRMISC notes.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-12-04Remove useless loop in elf.cTristan Gingold1-5/+1
2015-10-13Tidy code setting PT_GNU_RELRO p_flagsAlan Modra1-4/+1
No functional changes here. * elf.c (_bfd_elf_map_sections_to_segments): Don't set PT_GNU_RELRO p_flags. (assign_file_positions_for_non_load_sections): Set PT_GNU_RELRO flags to PF_R here.
2015-09-23Add support for files that contain multiple symbol index tables. Fixes PR 15835Nick Clifton1-53/+120
binutils PR binutils/15835 * readelf.c (struct elf_section_list): New structure. (symtab_shndx_hdr): Replace with symtab_shndx_list. (get_32bit_elf_symbols): Scan for a symbol index table matching the symbol table in use. (get_64bit_elf_symbols): Likewise. (process_section_headers): Handle multiple symbol index sections. bfd * elf-bfd.h (struct elf_section_list): New structure. (struct elf_obj_tdata): Replace symtab_shndx_hdr with symtab_shndx_list. Delete symtab_shndx_section. (elf_symtab_shndx): Replace macro with elf_symtab_shndx_list. * elf.c (bfd_elf_get_syms): If symtab index sections are present, scan them for the section that matches the provided symbol table. (bfd_section_from_shdr): Record all SHT_SYMTAB_SHNDX sections. (assign_section_numbers): Use the first symtab index table in the list. (_bfd_elf_compute_section_file_positions): Replace use of symtab_shndx_hdr with use of symtab_shndx_list. (find_section_in_list): New function. (assign_file_postions_except_relocs): Use new function. (_bfd_elf_copy_private_symbol_data): Likewise. (swap_out_syms): Handle multiple symbol table index sections. * elf32-m32c.c (m32c_elf_relax_section): Replace use of symtab_shndx_hdr with use of symtab_shndx_list. * elf32-rl78.c (rl78_elf_relax_section): Likewise. * elf32-rx.c (rx_relax_section): Likewise. * elf32-v850.c (v850_elf_relax_delete_bytes): Likewise. * elflink.c (bfd_elf_final_link): Likewise.
2015-08-31Make asection->id and asection->index unsignedAlan Modra1-1/+1
These int vars are really unsigned, so make them so. * section.c (struct bfd_section): Make "id" and "index" unsigned. * coff-rs6000.c (_bfd_xcoff_sizeof_headers): Adjust local var to suit. * elf.c (elf_map_symbols): Likewise. * elf64-ppc.c (sym_exists_at): Make "id" param unsigned. (struct ppc_link_hash_table): Make "top_id" and "top_index" unsigned. (ppc64_elf_setup_section_lists): Ditto for local vars. * elf32-arm.c: Similarly to elf64-ppc.c. * elf32-avr.c: Likewise. * elf32-hppa.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-metag.c: Likewise. * elf32-nios2.c: Likewise. * elfnn-aarch64.c: Likewise. * simple.c (struct saved_offsets): Make "section_count" unsigned. * bfd-in2.h: Regenerate.
2015-08-25Replace assertions with warning messages about ELF binaries containing ↵Nick Clifton1-2/+18
multiple symbol tables. PR binutils/18854 * elf.c (bfd_section_from_shdr): Replace assertions with warnings about multiple symbol tables.
2015-08-22Uninitialized vd_nodenameAlan Modra1-1/+2
Belt and braces fix. Either of the changes here is sufficient to ensure vd_nodename is initialized properly. * elf.c (_bfd_elf_slurp_version_tables): Always init vd_nodename. Don't copy fields not set by _bfd_elf_swap_verdef_in.
2015-08-18Add output_type to bfd_link_infoH.J. Lu1-7/+7
The "shared" field in bfd_link_info is set for both DSO and and PIE. There are separate fields for executable and relocatable outputs. This patch adds an "output_type" field: enum output_type { type_unknown = 0, type_executable, type_dll, type_relocatable }; and a "pic" field to bfd_link_info to replace shared, executable and relocatable fields so that we can use the "output_type" field to check for output type and the "pic" field check if output is PIC. Macros, bfd_link_executable, bfd_link_dll, bfd_link_relocatable, bfd_link_pic and bfd_link_pie, are provided to check for output features. bfd/ * bfd/aoutx.h: Replace shared, executable, relocatable and pie fields with bfd_link_executable, bfd_link_dll, bfd_link_relocatable, bfd_link_pic and bfd_link_pie. * bfd/bout.c: Likewise. * bfd/coff-alpha.c: Likewise. * bfd/coff-arm.c: Likewise. * bfd/coff-i386.c: Likewise. * bfd/coff-i960.c: Likewise. * bfd/coff-m68k.c: Likewise. * bfd/coff-mcore.c: Likewise. * bfd/coff-mips.c: Likewise. * bfd/coff-ppc.c: Likewise. * bfd/coff-rs6000.c: Likewise. * bfd/coff-sh.c: Likewise. * bfd/coff-tic80.c: Likewise. * bfd/coff-x86_64.c: Likewise. * bfd/coff64-rs6000.c: Likewise. * bfd/coffgen.c: Likewise. * bfd/cofflink.c: Likewise. * bfd/ecoff.c: Likewise. * bfd/ecofflink.c: Likewise. * bfd/elf-bfd.h: Likewise. * bfd/elf-eh-frame.c: Likewise. * bfd/elf-ifunc.c: Likewise. * bfd/elf-m10200.c: Likewise. * bfd/elf-m10300.c: Likewise. * bfd/elf-s390-common.c: Likewise. * bfd/elf-vxworks.c: Likewise. * bfd/elf.c: Likewise. * bfd/elf32-arm.c: Likewise. * bfd/elf32-avr.c: Likewise. * bfd/elf32-bfin.c: Likewise. * bfd/elf32-cr16.c: Likewise. * bfd/elf32-cr16c.c: Likewise. * bfd/elf32-cris.c: Likewise. * bfd/elf32-crx.c: Likewise. * bfd/elf32-d10v.c: Likewise. * bfd/elf32-dlx.c: Likewise. * bfd/elf32-epiphany.c: Likewise. * bfd/elf32-fr30.c: Likewise. * bfd/elf32-frv.c: Likewise. * bfd/elf32-ft32.c: Likewise. * bfd/elf32-h8300.c: Likewise. * bfd/elf32-hppa.c: Likewise. * bfd/elf32-i370.c: Likewise. * bfd/elf32-i386.c: Likewise. * bfd/elf32-i860.c: Likewise. * bfd/elf32-ip2k.c: Likewise. * bfd/elf32-iq2000.c: Likewise. * bfd/elf32-lm32.c: Likewise. * bfd/elf32-m32c.c: Likewise. * bfd/elf32-m32r.c: Likewise. * bfd/elf32-m68hc11.c: Likewise. * bfd/elf32-m68hc1x.c: Likewise. * bfd/elf32-m68k.c: Likewise. * bfd/elf32-mcore.c: Likewise. * bfd/elf32-mep.c: Likewise. * bfd/elf32-metag.c: Likewise. * bfd/elf32-microblaze.c: Likewise. * bfd/elf32-moxie.c: Likewise. * bfd/elf32-msp430.c: Likewise. * bfd/elf32-mt.c: Likewise. * bfd/elf32-nds32.c: Likewise. * bfd/elf32-nios2.c: Likewise. * bfd/elf32-or1k.c: Likewise. * bfd/elf32-ppc.c: Likewise. * bfd/elf32-rl78.c: Likewise. * bfd/elf32-rx.c: Likewise. * bfd/elf32-s390.c: Likewise. * bfd/elf32-score.c: Likewise. * bfd/elf32-score7.c: Likewise. * bfd/elf32-sh-symbian.c: Likewise. * bfd/elf32-sh.c: Likewise. * bfd/elf32-sh64.c: Likewise. * bfd/elf32-spu.c: Likewise. * bfd/elf32-tic6x.c: Likewise. * bfd/elf32-tilepro.c: Likewise. * bfd/elf32-v850.c: Likewise. * bfd/elf32-vax.c: Likewise. * bfd/elf32-visium.c: Likewise. * bfd/elf32-xc16x.c: Likewise. * bfd/elf32-xstormy16.c: Likewise. * bfd/elf32-xtensa.c: Likewise. * bfd/elf64-alpha.c: Likewise. * bfd/elf64-hppa.c: Likewise. * bfd/elf64-ia64-vms.c: Likewise. * bfd/elf64-mmix.c: Likewise. * bfd/elf64-ppc.c: Likewise. * bfd/elf64-s390.c: Likewise. * bfd/elf64-sh64.c: Likewise. * bfd/elf64-x86-64.c: Likewise. * bfd/elflink.c: Likewise. * bfd/elfnn-aarch64.c: Likewise. * bfd/elfnn-ia64.c: Likewise. * bfd/elfxx-mips.c: Likewise. * bfd/elfxx-sparc.c: Likewise. * bfd/elfxx-tilegx.c: Likewise. * bfd/i386linux.c: Likewise. * bfd/linker.c: Likewise. * bfd/m68klinux.c: Likewise. * bfd/pdp11.c: Likewise. * bfd/pe-mips.c: Likewise. * bfd/peXXigen.c: Likewise. * bfd/reloc.c: Likewise. * bfd/reloc16.c: Likewise. * bfd/sparclinux.c: Likewise. * bfd/sunos.c: Likewise. * bfd/vms-alpha.c: Likewise. * bfd/xcofflink.c: Likewise. include/ * include/bfdlink.h (output_type): New enum. (bfd_link_executable): New macro. (bfd_link_dll): Likewise. (bfd_link_relocatable): Likewise. (bfd_link_pic): Likewise. (bfd_link_pie): Likewise. (bfd_link_info): Remove shared, executable, pie and relocatable. Add output_type and pic. ld/ * ld/ldctor.c: Replace shared, executable, relocatable and pie fields with bfd_link_executable, bfd_link_dll, bfd_link_relocatable, bfd_link_pic and bfd_link_pie. * ld/ldemul.c: Likewise. * ld/ldfile.c: Likewise. * ld/ldlang.c: Likewise. * ld/ldmain.c: Likewise. * ld/ldwrite.c: Likewise. * ld/lexsup.c: Likewise. * ld/pe-dll.c: Likewise. * ld/plugin.c: Likewise. * ld/emultempl/aarch64elf.em: Likewise. * ld/emultempl/aix.em: Likewise. * ld/emultempl/alphaelf.em: Likewise. * ld/emultempl/armcoff.em: Likewise. * ld/emultempl/armelf.em: Likewise. * ld/emultempl/avrelf.em: Likewise. * ld/emultempl/beos.em: Likewise. * ld/emultempl/cr16elf.em: Likewise. * ld/emultempl/elf-generic.em: Likewise. * ld/emultempl/elf32.em: Likewise. * ld/emultempl/genelf.em: Likewise. * ld/emultempl/generic.em: Likewise. * ld/emultempl/gld960.em: Likewise. * ld/emultempl/gld960c.em: Likewise. * ld/emultempl/hppaelf.em: Likewise. * ld/emultempl/irix.em: Likewise. * ld/emultempl/linux.em: Likewise. * ld/emultempl/lnk960.em: Likewise. * ld/emultempl/m68hc1xelf.em: Likewise. * ld/emultempl/m68kcoff.em: Likewise. * ld/emultempl/m68kelf.em: Likewise. * ld/emultempl/metagelf.em: Likewise. * ld/emultempl/mipself.em: Likewise. * ld/emultempl/mmo.em: Likewise. * ld/emultempl/msp430.em: Likewise. * ld/emultempl/nds32elf.em: Likewise. * ld/emultempl/needrelax.em: Likewise. * ld/emultempl/nios2elf.em: Likewise. * ld/emultempl/pe.em: Likewise. * ld/emultempl/pep.em: Likewise. * ld/emultempl/ppc32elf.em: Likewise. * ld/emultempl/ppc64elf.em: Likewise. * ld/emultempl/sh64elf.em: Likewise. * ld/emultempl/solaris2.em: Likewise. * ld/emultempl/spuelf.em: Likewise. * ld/emultempl/sunos.em: Likewise. * ld/emultempl/tic6xdsbt.em: Likewise. * ld/emultempl/ticoff.em: Likewise. * ld/emultempl/v850elf.em: Likewise. * ld/emultempl/vms.em: Likewise. * ld/emultempl/vxworks.em: Likewise.
2015-08-12Remove trailing spaces in bfdH.J. Lu1-2/+2
2015-08-11Fix memory access problems discovered when running some binary tools on ↵Nick Clifton1-2/+15
corrupt files. PR binutils/18758 * elf.c (_bfd_elf_setup_sections): Add checks for corrupt section group information. * peicode.h (pe_ILF_make_a_section): Ensure alignment of the used_by_bfd pointer. (pe_ILF_build_a_bfd): Ensure alignment of vars.data pointer.
2015-08-11Fix a typo in _bfd_elf_copy_private_bfd_dataH.J. Lu1-1/+1
* elf.c (_bfd_elf_copy_private_bfd_data): Fix a typo.
2015-08-07Check sh_type/sh_flags/sh_addralign/sh_entsize when copying sh_link/sh_infoH.J. Lu1-1/+8
When copying the sh_link and sh_info fields in stripped section headers, we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize fields of the output section match the output. Since --only-keep-debug turns all non-debug sections into SHT_NOBITS sections, the output SHT_NOBITS type matches any input type. bfd/ PR binutils/18785 * elf.c (_bfd_elf_copy_private_bfd_data): When copying the sh_link and sh_info fields in stripped section headers, we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize fields of the output section match the output. Since --only-keep-debug turns all non-debug sections into SHT_NOBITS sections, the output SHT_NOBITS type matches any input type. binutils/testsuite/ PR binutils/18785 * binutils-all/objcopy.exp: Run strip-12. * binutils-all/strip-12.d: New file. * binutils-all/strip-12.s: Likewise.
2015-08-05Change the behaviour of the --only-keep-debug option to objcopy and strip so ↵Nick Clifton1-0/+57
that the sh_link and sh_info fields in stripped section headers are preserved. bfd * elf.c (_bfd_elf_copy_private_bfd_data): Copy the sh_link and sh_info fields of sections whose type has been changed to SHT_NOBITS. bin * doc/binutils.texi: Document that the --only-keep-debug option to strip and objcopy preserves the section headers of stripped sections. tests * binutils-all/objcopy.exp (keep_debug_symbols_and_check_links): New proc. Checks that debug-info-only binaries retain the sh_link field in stripped sections.
2015-07-28Fallout from "Reorder more powerpc64 sections for -z relro"Alan Modra1-4/+11
Commit 23283c1b changed the layout of some bss style sections on powerpc64, but neglected to add a page gap before the third PT_LOAD segment created by this reording. Without a page gap we get two PT_LOAD headers that overlap by one page in memory. That shouldn't be allowed because the dynamic loader will load garbage from the first page of the last segment over the last page of the previous segment. bfd/ * elf.c (_bfd_elf_map_sections_to_segments): Do not make a new segment for loaded sections after nonloaded sections if the sections are on the same page. ld/testsuite/ * ld-powerpc/elfv2so.d: Update
2015-07-24Correct reloc section nameAlan Modra1-1/+1
* elf.c (_bfd_elf_assign_file_positions_for_non_load): Use .rela prefix for reloc section corresponding to rela section associated with renamed debug section.
2015-06-25Don't set sh_size for .shstrtab twiceH.J. Lu1-1/+1
_bfd_elf_assign_file_positions_for_non_load will set the sh_size field for .shstrtab section. There is need to initialize it in _bfd_elf_compute_section_file_positions. * elf.c (_bfd_elf_compute_section_file_positions): Don't initialize sh_size for .shstrtab here.
2015-06-25Use strtab with GC and suffix merging for .strtabH.J. Lu1-53/+69
This patch uses ELF strtab with GC and suffix merging support to create ELF .strtab section. There is some small memory overhead to use ELF strtab: ==14928== HEAP SUMMARY: ==14928== in use at exit: 3,276,318 bytes in 679 blocks ==14928== total heap usage: 1,544 allocs, 865 frees, 15,259,146 bytes allocated vs. ==14936== HEAP SUMMARY: ==14936== in use at exit: 3,276,318 bytes in 679 blocks ==14936== total heap usage: 1,532 allocs, 853 frees, 15,026,402 bytes allocated when running: ./ld-new -m elf_x86_64 -o tmpdir/ld-partial.o -r ldgram.o ldlex-wrapper.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o plugin.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o eelf_x86_64.o eelf32_x86_64.o eelf_i386.o eelf_iamcu.o ei386linux.o eelf_l1om.o eelf_k1om.o ldbuildid.o The results are [32] .strtab STRTAB 0+ 3beff8 00407a 00 0 0 1 vs [32] .strtab STRTAB 0+ 3beff8 0041d8 00 0 0 1 It reduces the .strtab size by 350 bytes, about 2% Saving on libc.so from glibc is much more since libc.so has many alias symbols with the same suffix. For x32 glibc, [82] .strtab STRTAB 0+ 81b348 0159e7 00 0 0 1 vs [82] .strtab STRTAB 0+ 81b8bc 019e72 00 0 0 1 It reduces the .strtab size by 17547 bytes, about 16%. bfd/ PR gas/18451 * elf-bfd.h (elf_sym_strtab): New. (elf_link_hash_table): Add strtabcount, strtabsize and strtab. (_bfd_elf_stringtab_init): Removed. * elf.c (_bfd_elf_stringtab_init): Removed. (_bfd_elf_compute_section_file_positions): Replace bfd_strtab_hash/_bfd_elf_stringtab_init/_bfd_stringtab_free/ _bfd_stringtab_size with elf_strtab_hash/_bfd_elf_strtab_init/_bfd_elf_strtab_free/ _bfd_elf_strtab_size. Use _bfd_elf_strtab_add, _bfd_elf_strtab_finalize and _bfd_elf_strtab_offset to get st_name. (swap_out_syms): Likewise. * elflink.c (elf_final_link_info): Replace bfd_strtab_hash with elf_strtab_hash. Remove symbuf, symbuf_count, symbuf_size and shndxbuf_size. (elf_link_flush_output_syms): Removed. (elf_link_output_sym): Renamed to ... (elf_link_output_symstrtab): This. Replace _bfd_stringtab_add with _bfd_elf_strtab_add. Don't flush symbols to the file nor swap out symbols. (elf_link_swap_symbols_out): New. (elf_link_output_extsym): Replace elf_link_output_sym with elf_link_output_symstrtab. (elf_link_input_bfd): Likewise. (elf_final_link_free): Replace _bfd_stringtab_free with _bfd_elf_strtab_free. Remove symbuf. (bfd_elf_final_link): Replace _bfd_elf_stringtab_init with _bfd_elf_strtab_init. Don't set symbuf, symbuf_count, symbuf_size nor shndxbuf_size. Initialize strtabsize and strtab. Initialize symshndxbuf to -1 when number of sections >= 64K. Replace elf_link_output_sym/elf_link_output_sym with elf_link_output_symstrtab/elf_link_output_symstrtab. Don't call elf_link_flush_output_syms. Call _bfd_elf_strtab_finalize and elf_link_swap_symbols_out. Replace _bfd_stringtab_size and _bfd_stringtab_emit with _bfd_elf_strtab_size and _bfd_elf_strtab_emit. gas/testsuite/ PR gas/18451 * gas/elf/elf.exp: Run strtab. * gas/elf/strtab.d: New file. * gas/elf/strtab.s: Likewise. ld/testsuite/ PR gas/18451 * ld-elf/strtab.d: New file. * ld-elf/strtab.s: Likewise.
2015-06-15Allow gdb to find debug symbols file by build-id for PE file format alsoJon Turney1-6/+6
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-05-14Don't add the zlib header to SHF_COMPRESSED sectionH.J. Lu1-1/+4
In a SHF_COMPRESSED compressed section, the raw compressed data should begin immediately after the compression header. This patch removes the extra zlib header from the SHF_COMPRESSED section. bfd/ * bfd.c (bfd_update_compression_header): Also write the zlib header if the SHF_COMPRESSED bit cleared.. (bfd_check_compression_header): Return the uncompressed size. * compress.c (decompress_contents): Don't skip the zlib header. (bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB, which doesn't have the zlib header. (bfd_init_section_decompress_status): Likewise. (bfd_get_full_section_contents): Updated. (bfd_is_section_compressed): Likewise. (bfd_is_section_compressed_with_header): Return the uncompressed size. * elf.c (_bfd_elf_make_section_from_shdr): Updated. * bfd-in2.h: Regenerated. binutils/ * readelf.c (uncompress_section_contents): Add a parameter for uncompressed size. Don't check the zlib header. (load_specific_debug_section): Updated. binutils/testsuite/ * binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info" with "$OBJDUMP -W". * binutils-all/libdw2-compressedgabi.out: Updated. gas/ 2015-05-14 H.J. Lu <hongjiu.lu@intel.com> * write.c (compress_debug): Don't write the zlib header, which is handled by bfd_update_compression_header.
2015-04-24Extend test for local labels to include fake symbols and local labels with a ↵Nick Clifton1-5/+42
numeric suffix. * elf.c (_bfd_elf_is_local_label_name): Extend test for assembler local labels to include local labels with a numeric suffix and fake symbols.
2015-04-23Delay setting up compressed debug section namesH.J. Lu1-53/+117
When we set up st_name for output section name in elf_fake_sections, we don't know if the compressed DWARF debug section will be smaller. We may end up with compressed DWARF debug sections which are bigger than the uncompressed ones. This patch delays setting up st_name for output DWARF debug section to _bfd_elf_assign_file_positions_for_non_load which will compress the output debug section. We also postpone placement of shstrtab section after DWARF debug sections have been compressed. The net effect is .shstrtab section is now placed after .symtab and .strtab sections. bfd/ PR ld/18277 * compress.c (bfd_compress_section_contents): Remove the write_compress argument. (bfd_init_section_compress_status): Updated. (bfd_compress_section): Likewise. * elf.c (_bfd_elf_set_reloc_sh_name): New. (_bfd_elf_init_reloc_shdr): Add delay_st_name_p. Set sh_name to (unsigned int) -1 if delay_st_name_p is TRUE. Use _bfd_elf_set_reloc_sh_name. (elf_fake_sections): Don't rename DWARF debug section for linker output if it will be compressed. Instead, set delay_st_name_p to TRUE and pass it to _bfd_elf_init_reloc_shdr. (assign_section_numbers): Call _bfd_elf_strtab_addref only if sh_name != (unsigned int) -1. Don't finalize nor assign shstrtab section here. Delay setting output section names to _bfd_elf_write_object_contents. (_bfd_elf_compute_section_file_positions): Update comments on sh_offset for shstrtab section. (assign_file_positions_for_non_load_sections): Set sh_offset to -1 for shstrtab section. (assign_file_positions_except_relocs): Likewise. (_bfd_elf_assign_file_positions_for_non_load): Set up sh_name when compressing DWARF debug sections. Place shstrtab section after DWARF debug sections have been compressed. (_bfd_elf_write_object_contents): Setting sh_name for output sections. ld/testsuite/ PR ld/18277 * ld-elf/compressed1d.d: New. * ld-elf/compressed1e.d: Likewise.
2015-04-23Don't change compressed input debug section namesH.J. Lu1-56/+97
Change compressed input debug section name for objdump is very confusing. But we need to change it for linker so that linker will consider the input section as a debug section. This patch delays section rename to elf_fake_sections for objcopy and avoids it for objdump. bfd/ PR binutils/18209 * bfd.c (bfd): Add is_linker_input. * elf.c (convert_debug_to_zdebug): New. (convert_zdebug_to_debug): Likewise. (_bfd_elf_make_section_from_shdr): Don't convert .debug_* to .zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME. (_bfd_elf_init_reloc_shdr): Pass a pointer to section name instead of a pointer to section. (elf_fake_sections): Rename the section name if SEC_ELF_RENAME is set. * section.c (SEC_ELF_RENAME): New. * bfd-in2.h: Regenerated. binutils/ PR binutils/18209 * objcopy.c (setup_section): Copy compress status. binutils/testsuite/ PR binutils/18209 * binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W on zlib-gabi output. * binutils-all/dw2-1.W: Convert section names to .zdebug_*. * binutils-all/dw2-3.W: Likewise. * binutils-all/objdump.W: Likewise. * binutils-all/dw2-3gabi.W: New file. ld/ PR binutils/18209 * ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
2015-04-20Always set up sh_name in assign_section_numbersH.J. Lu1-5/+2
commit 9ad5cbcfb23cb74d34bd04f88f4e47c0f5de5155 added the initial support for more than 64k ELF sections with holes for reserved section indices in section header table and set entries of reserved section indices in section header table to index 0: for (secn = 1; secn < section_number; ++secn) - i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd), - i_shdrp[secn]->sh_name); - + if (i_shdrp[secn] == NULL) + i_shdrp[secn] = i_shdrp[0]; + else + i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd), + i_shdrp[secn]->sh_name); commit 4fbb74a6055f7d48f09c44064073d3b1e99c6642 removed holes in section header table. Check for i_shdrp[secn] == NULL is no longer needed now. This patch removes it. * elf.c (assign_section_numbers): Always set up sh_name.
2015-04-20Iterate ELF sections by pointerH.J. Lu1-9/+8
Iterate ELF sections by pointer without section counter. It removes "i++". * elf.c (assign_file_positions_for_non_load_sections): Iterate sections by pointer. (_bfd_elf_assign_file_positions_for_non_load): Likewise.
2015-04-14Add --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]H.J. Lu1-7/+82
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] to ld for ELF targets to support generating compressed DWARF debug sections. We always generate .zdebug_* section since section names have been finalized and they can't be changed easily when compression is being performed. bfd/ * bfd-in.h (compressed_debug_section_type): New. * compress.c (bfd_compress_section_contents): Add an argument for linker write compression and always generate .zdebug_* section when linking. (bfd_init_section_compress_status): Pass FALSE to bfd_compress_section_contents. (bfd_compress_section): New function. * elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS on DWARF debug sections if COMPRESS_DEBUG is set and rename section if COMPRESS_DEBUG_GABI_ZLIB isn't set. (assign_file_positions_for_non_load_sections): Set sh_offset to -1 if SEC_ELF_COMPRESS is set. (assign_file_positions_except_relocs): Likwise. (_bfd_elf_assign_file_positions_for_relocs): Renamed to ... (_bfd_elf_assign_file_positions_for_non_load): This. Change return time to bfd_boolean. Compress the section if SEC_ELF_COMPRESS is set. (_bfd_elf_write_object_contents): Updated. (_bfd_elf_set_section_contents): Write section contents to the buffer if SEC_ELF_COMPRESS is set. * merge.c: Include "elf-bfd.h". (sec_merge_emit): Add arguments for contents and offset. Write to contents with offset if contents isn't NULL. (_bfd_write_merged_section): Write section contents to the buffer if SEC_ELF_COMPRESS is set. Pass contents and output_offset to sec_merge_emit. * elflink.c (bfd_elf_final_link): Allocate the buffer for output section contents if SEC_ELF_COMPRESS is set. * section.c (SEC_ELF_COMPRESS): New. * bfd-in2.h: Regenerated. gas/ * as.h (compressed_debug_section_type): Removed. include/ * bfdlink.h (bfd_link_info): Add compress_debug. ld/ * ld.texinfo: Document --compress-debug-sections=. * ldmain.c (main): Set BFD_COMPRESS on output_bfd if COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd for COMPRESS_DEBUG_GABI_ZLIB. * lexsup.c (elf_static_list_options): Add --compress-debug-sections=. * emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New. (xtra_long): Add "compress-debug-sections". (gld${EMULATION_NAME}_handle_option): Handle OPTION_COMPRESS_DEBUG. ld/testsuite/ * ld-elf/compress.exp (build_tests): Add tests for --compress-debug-sections=. (run_tests): Likewise. Add additonal tests for --compress-debug-sections=. * ld-elf/gabiend.rt: New file. * ld-elf/gabinormal.rt: Likewise. * ld-elf/gnubegin.rS: Likewise. * ld-elf/gnunormal.rS: Likewise. * ld-elf/zlibbegin.rS: Likewise. * ld-elf/zlibnormal.rS: Likewise.
2015-04-13Add support for the x86 XSAVE extended state on FreeBSD/x86.John Baldwin1-1/+8
Recognize NT_X86_XSTATE notes in FreeBSD process cores. Recent FreeBSD versions include a note containing the XSAVE state for each thread in the process when XSAVE is in use. The note stores a copy of the current XSAVE mask in a reserved section of the machine-defined XSAVE state at the same offset as Linux's NT_X86_XSTATE note. For native processes, use the PT_GETXSTATE_INFO ptrace request to determine if XSAVE is enabled, and if so the active XSAVE state mask (that is, the value of %xcr0 for the target process) as well as the size of XSAVE state area. Use the PT_GETXSTATE and PT_SETXSTATE requests to fetch and store the XSAVE state, respectively, in the BSD x86 native targets. In addition, the FreeBSD amd64 and i386 native targets now include "read_description" target methods to determine the correct x86 target description for the current XSAVE mask. On FreeBSD amd64 this also properly returns an i386 target description for 32-bit binaries which allows the 64-bit GDB to run 32-bit binaries. Note that the ptrace changes are in the BSD native targets, not the FreeBSD-specific native targets since that is where the other ptrace register accesses occur. Of the other BSDs, NetBSD and DragonFly use XSAVE in the kernel but do not currently export the extended state via ptrace(2). OpenBSD does not currently support XSAVE. bfd/ChangeLog: * elf.c (elfcore_grok_note): Recognize NT_X86_XSTATE on FreeBSD. (elfcore_write_xstatereg): Use correct note name on FreeBSD. gdb/ChangeLog: * amd64-tdep.c (amd64_target_description): New function. * amd64-tdep.h: Export amd64_target_description and tdesc_amd64. * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len. (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle x86 extended save area. (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise. * amd64bsd-nat.h: Export amd64bsd_xsave_len. * amd64fbsd-nat.c (amd64fbsd_read_description): New function. (_initialize_amd64fbsd_nat): Set "to_read_description" to "amd64fbsd_read_description". * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function. (amd64fbsd_supply_xstateregset): New function. (amd64fbsd_collect_xstateregset): New function. Add "amd64fbsd_xstateregset". (amd64fbsd_iterate_over_regset_sections): New function. (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to "I386_FBSD_XSAVE_XCR0_OFFSET". Add "iterate_over_regset_sections" gdbarch method. Add "core_read_description" gdbarch method. * i386-tdep.c (i386_target_description): New function. * i386-tdep.h: Export i386_target_description and tdesc_i386. * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len. (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle x86 extended save area. (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise. * i386bsd-nat.h: Export i386bsd_xsave_len. * i386fbsd-nat.c (i386fbsd_read_description): New function. (_initialize_i386fbsd_nat): Set "to_read_description" to "i386fbsd_read_description". * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function. (i386fbsd_core_read_description): New function. (i386fbsd_supply_xstateregset): New function. (i386fbsd_collect_xstateregset): New function. Add "i386fbsd_xstateregset". (i386fbsd_iterate_over_regset_sections): New function. (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to "I386_FBSD_XSAVE_XCR0_OFFSET". Add "iterate_over_regset_sections" gdbarch method. Add "core_read_description" gdbarch method. * i386fbsd-tdep.h: New file.
2015-04-08Add SHF_COMPRESSED support to gas and objcopyH.J. Lu1-29/+46
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-04-07Modify get_reloc_section for targets that map .got.plt to .gotAlan Modra1-1/+9
Fixes tic6x testsuite failures due to .rela.plt having a zero sh_info. I considered passing link_info to get_reloc_section so we could directly return the .got.plt output section, but we need the fallback to name lookup anyway for objcopy. bfd/ * elf.c (_bfd_elf_get_reloc_section): Allow for .got.plt being mapped to output .got section. ld/testsuite/ * ld-arm/tls-gdesc-nlazy.g: Adjust for readelf note. * ld-tic6x/shlib-1.rd: Expect corrected .rela.plt sh_info. * ld-tic6x/shlib-1b.rd: Likewise. * ld-tic6x/shlib-1r.rd: Likewise. * ld-tic6x/shlib-1rb.rd: Likewise. * ld-tic6x/shlib-app-1.rd: Likewise. * ld-tic6x/shlib-app-1b.rd: Likewise. * ld-tic6x/shlib-app-1r.rd: Likewise. * ld-tic6x/shlib-app-1rb.rd: Likewise. * ld-tic6x/shlib-noindex.rd: Likewise.
2015-04-07Treat assembler generated local labels as local.Nick Clifton1-0/+4
* elf.c (_bfd_elf_is_local_label_name): Treat assembler generated local labels as local.
2015-04-04Also preserve the SHF_COMPRESSED bitH.J. Lu1-0/+5
For objcopy and relocatable link, we should also preserve the SHF_COMPRESSED bit if not decompress. * elf.c (_bfd_elf_init_private_section_data): Also preserve the SHF_COMPRESSED bit if not decompress.
2015-03-30Properly set sh_info for .rela.plt/rel.plt sectionH.J. Lu1-8/+35
Since .rela.plt/rel.plt section may contain relocations against .got.plt section, we set sh_info for .rela.plt/rel.plt section to .got.plt section index if target has .got.plt section. bfd/ PR ld/18169 * elf-bfd.h (elf_backend_data): Add get_reloc_section. (_bfd_elf_get_reloc_section): New. * elf.c (_bfd_elf_get_reloc_section): Likewise. (assign_section_numbers): Call get_reloc_section to look up the section the relocs apply. * elfxx-target.h (elf_backend_get_reloc_section): Likewise. (elfNN_bed): Initialize get_reloc_section with elf_backend_get_reloc_section. ld/testsuite/ PR ld/18169 * ld-elf/linkinfo1a.d: Updated. * ld-elf/linkinfo1b.d: Likewise.
2015-03-18Fix debug section compression so that it is only performed if it would make ↵Jon Turney1-9/+15
the section smaller. PR binutils/18087 gas * doc/as.texinfo: Note that when gas compresses debug sections the compression is only performed if it makes the section smaller. * write.c (compress_debug): Do not compress a debug section if doing so would make it larger. tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or .debug_info sections to be compressed. binu * doc/binutils.texi: Note that when objcopy compresses debug sections the compression is only performed if it makes the section smaller. bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a debug section's name if the section was actually compressed. * elf.c (_bfd_elf_make_section_from_shdr): Likewise. * compress.c (bfd_init_section_compress_status): Do not compress the section if doing so would make it bigger. In such cases leave the section alone and return COMPRESS_SECTION_NONE.
2015-02-26Fixes illegal memory access errors and arithmetic overflows when running ↵Nick Clifton1-4/+28
strip on fuzzed binaries. PR binutils/17512 * coffcode.h (coff_compute_section_file_positions): Report negative page sizes. * elf.c (elf_fake_sections): Handle excessive alignmment powers. (assign_file_positions_for_non_load_sections): Replace assertion with an error message. (rewrite_elf_program_header): Handle excessive segment alignments. * mach-o.c (bfd_mach_o_read_section_32): Likewise. (bfd_mach_o_read_section_64): Likewise. * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Use %B to print a bfd name, not %A.
2015-02-20S390: Support new vector register sectionsAndreas Arnez1-0/+55
The IBM z13 has new 128-bit wide vector registers v0-v31, where v0-v15 include the existing 64-bit wide floating point registers. The Linux kernel presents the vector registers as two additional register sets, one for the right halves of v0-v15 and another one for the full registers v16-v31. Thus a new core file may contain two new register note sections, and this patch adds support to binutils for them. bfd/ * elf-bfd.h (elfcore_write_s390_vxrs_low): Add prototype. (elfcore_write_s390_vxrs_high): Likewise. * elf.c (elfcore_grok_s390_vxrs_low): New function. (elfcore_grok_s390_vxrs_high): New function. (elfcore_grok_note): Call them. (elfcore_write_s390_vxrs_low): New function. (elfcore_write_s390_vxrs_high): New function. (elfcore_write_register_note): Call them. binutils/ * readelf.c (get_note_type): Add NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH. include/elf/ * common.h (NT_S390_VXRS_LOW): New macro. (NT_S390_VXRS_HIGH): Likewise.
2015-01-08Fix memory access violations exposed by running strip on fuzzed binaries.Nick Clifton1-0/+5
PR binutils/17512 * coffcode.h (coff_slurp_symbol_table): Return false if we failed to load the line table. * elf.c (_bfd_elf_map_sections_to_segments): Enforce a minimum maxpagesize of 1. * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the Data Directory Size is too large. * objcopy.c (copy_object): Free the symbol table if no symbols could be loaded. (copy_file): Use bfd_close_all_done to close files that could not be copied.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-12-11This commit causes hundreds of core file regressions in gdb:Keith Seitz1-13/+18
commit f64e188b58f4aab4cbd03aa6e9fc1aa602546e26 Author: Nick Clifton <nickc@redhat.com> Date: Tue Dec 9 12:42:18 2014 +0000 More fixes for memory access violations triggered by fuzzed binaries. [snip] * elf.c (elf_parse_notes): Check that the namedata is long enough for the string comparison that is about to be performed. (elf_read_notes): Zero-terminate the note buffer. This change to elf_parse_notes is the culprit: + for (i = ARRAY_SIZE (grokers); i--;) + if (in.namesz >= sizeof grokers[i].string - 1 + && strncmp (in.namedata, grokers[i].string, + sizeof (grokers[i].string) - 1) == 0) Note how this applies sizeof to grokers[i].string... bfd/ChangeLog * elf.c (elf_parse_notes): Define convenience macro GROKER_ELEMENT to add elements to 'grokers'. Use grokers.len instead of sizeof in string comparisons.
2014-12-10Don't return DW_AT_name for function name in C++Alan Modra1-121/+9
DW_AT_name for functions typically just contains the base function name, so lacks namespace, class and parameter information. It would be possible to extract all these from the DWARF, but at a considerable complication of the parser in dwarf2.c, and then you'd need to mangle it all together. Much simpler is to look up the actual symbol. This patch does that, avoiding the extra symbol lookup when the language doesn't do name mangling. PR 17541 * dwarf2.c (struct comp_unit): Add "lang". (non_mangled): New function. (struct funcinfo): Add "is_linkage". Reorder for better packing. Make "name" a const char*. (lookup_address_in_function_table): Delete functionname_ptr param. (find_abstract_instance_name): Add is_linkage param. Set if we have DW_AT_linkage_name or non_mangled DW_AT_name. (scan_unit_for_symbols): Similarly set func->is_linkage. (parse_comp_unit): Stash DW_AT_language. (comp_unit_find_nearest_line): Replace functionname_ptr param with function_ptr param. (_bfd_dwarf2_find_nearest_line): Adjust above calls. Set functionname_ptr from function->name. Call _bfd_elf_find_function to retrieve symbol for function if not linkage name. (_bfd_elf_find_function): Add bfd_target_elf_flavour test, moved from.. * elf.c (elf_find_function): ..here. (_bfd_elf_find_nearest_line): Adjust calls. * elf-bfd.h (_bfd_elf_find_function): Declare.
2014-12-09More fixes for memory access violations triggered by fuzzed binaries.Nick Clifton1-24/+29
PR binutils/17512 * objdump.c (display_any_bfd): Avoid infinite loop closing and opening the same archive again and again. * archive64.c (bfd_elf64_archive_slurp_armap): Add range checks. * libbfd.c (safe_read_leb128): New function. * libbfd-in.h (safe_read_leb128): Add prototype. * libbfd.h: Regenerate. * elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128. Check for an over-long subsection length. * elf.c (elf_parse_notes): Check that the namedata is long enough for the string comparison that is about to be performed. (elf_read_notes): Zero-terminate the note buffer.
2014-12-01More fixes for memory access violations exposed by fuzzed binaries.Nick Clifton1-8/+28
PR binutils/17512 * dwarf.h (struct dwarf_section): Add user_data field. * dwarf.c (frame_need_space): Check for an over large register number. (display_debug_frames): Check the return value from frame_need_space. Check for a CFA expression that is so long the start address wraps around. (debug_displays): Initialise the user_data field. * objdump.c (load_specific_debug_section): Save the BFD section pointer in the user_data field of the dwarf_section structure. (free_debug_section): Update BFD section data when freeing section contents. * readelf.c (load_specific_debug_section): Initialise the user_data field. * archive.c (do_slurp_coff_armap): Add range checks to prevent running off the end of the string table. * compress.c (bfd_get_full_section_contents): Return a NULL pointer for zero sized sections. Do not attempt to copy a buffer onto itself. * elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty header. Add range checks to avoid running off the end of the section. * elf.c (bfd_elf_get_str_section): Seek before allocating so that if the seek fails, no memory is allocated. (bfd_elf_string_from_elf_section): Do not allocate a string from a non string section. It only leads to trouble later on. (_bfd_elf_print_private_bfd_data): Check for there being too little external dynamic data. (bfd_section_from_shdr): Replace assertion with a failure mode. (bfd_section_from_shdr): When walking a loaded group section use the internal structure size, not the external size. Check for the group section being empty. * elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a failure mode. * elfcode.h (elf_slurp_reloc_table): Likewise. * reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto parameter is NULL.
2014-11-28Sanity checks on version sectionAlan Modra1-12/+25
* elf.c (_bfd_elf_slurp_version_tables): Exit loops when vn_next/ vna_next/vd_next/vda_next is zero. Correct counts.
2014-11-27Fixes a few more memory access violations exposed by fuzzed binaries.Nick Clifton1-1/+3
PR binutils/17512 * ecoff.c (_bfd_ecoff_slurp_symbol_table): Warn about and correct a discrepancy between the isymMax and ifdMax values in the symbolic header. * elf.c (_bfd_elf_print_private_bfd_data): Fix the range check scanning the external dynamic entries.
2014-11-26_bfd_elf_slurp_version_tables tidyAlan Modra1-43/+46
The internal verref buffer is allocated with bfd_zalloc, based on a count given in headers. If the headers are broken/fuzzed and contain an enormous count the alloc can result in OOM. If we first read the external verrefs (into a buffer that isn't zeroed on allocation) then the read provides a sanity check on the headers. Also prints an error for version info that fails other sanity checks. * elf.c (_bfd_elf_slurp_version_tables): Delay allocation of internal verref buffer. Error for zero sh_info. Print errors. Check for zero vd_ndx. Use bfd_zalloc for vd_auxptr buffer.
2014-11-25Use get_symbol_version_string in BFD_JUMP_TABLE_SYMBOLSH.J. Lu1-5/+5
This patch adds get_symbol_version_string to BFD_JUMP_TABLE_SYMBOLS so that we can use bfd_get_symbol_version_string in objdump for non-ELF targets. bfd/ * targets.c (BFD_JUMP_TABLE_SYMBOLS): Use NAME##_get_symbol_version_string. (bfd_get_symbol_version_string): New. * aout-adobe.c (aout_32_get_symbol_version_string): Define using _bfd_nosymbols define. * aout-target.h (MY_get_symbol_version_string): Likewise. * aout-tic30.c (MY_get_symbol_version_string): Likewise. * binary.c (binary_get_symbol_version_string): Likewise. * bout.c (aout_32_get_symbol_version_string): Likewise. * coff-rs6000.c (_bfd_xcoff_get_symbol_version_string): Likewise. * i386msdos.c (msdos_get_symbol_version_string): Likewise. * i386os9k.c (aout_32_get_symbol_version_string): Likewise. * ieee.c (ieee_get_symbol_version_string): Likewise. * ihex.c (ihex_get_symbol_version_string): Likewise. * libecoff.h (_bfd_ecoff_get_symbol_version_string): Likewise. * mach-o-target.c (bfd_mach_o_get_symbol_version_string): Likewise. * mmo.c (mmo_get_symbol_version_string): Likewise. * nlm-target.h (nlm_get_symbol_version_string): Likewise. * oasys.c (oasys_get_symbol_version_string): Likewise. * pef.c (bfd_pef_get_symbol_version_string): Likewise. * plugin.c (bfd_plugin_get_symbol_version_string): Likewise. * ppcboot.c (ppcboot_get_symbol_version_string): Likewise. * som.c (som_get_symbol_version_string): Likewise. * srec.c (srec_get_symbol_version_string): Likewise. * tekhex.c (tekhex_get_symbol_version_string): Likewise. * versados.c (versados_get_symbol_version_string): Likewise. * vms-alpha.c (alpha_vms_get_symbol_version_string): Likewise. * xsym.c (bfd_sym_get_symbol_version_string): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Use coff_get_symbol_version_string. (rs6000_xcoff64_aix_vec): Likewise. * elf-bfd.h (bfd_elf_get_symbol_version_string): Renamed to ... (_bfd_elf_get_symbol_version_string): This. * elf.c: Likewise. (bfd_elf_print_symbol): Updated. * elfxx-target.h (bfd_elfNN_get_symbol_version_string): Define. * libbfd-in.h (_bfd_nosymbols_get_symbol_version_string): Define. * libcoff-in.h (coff_get_symbol_version_string): Likewise. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. * libcoff.h: Likewise. binutils/ * objdump.c (objdump_print_symname): Replace bfd_elf_get_symbol_version_string with bfd_get_symbol_version_string.
generated by cgit v1.1 at 2024-12-14 12:52:48 +0000