Age | Commit message (Collapse) | Author | Files | Lines |
|
While documented to not be reliable, it is still odd for objcopy to
silently produce bad output when converting COFF/PE object files to ELF
ones. The issue there is that relocation addends all are screwed up by
subtracting the symbol's section offset. In the COFF/PE world, to my
knowledge, section contents stores the addends alone, not the result of
symbol value plus addend. Hence the compensation talked about in a
comment ahead of the sole use site of CALC_ADDEND() may need to account
for the VMA (which is always zero for object files anyway), but not for
the symbol value.
The coff-sh.c adjustment is based upon guessing that behavior there is
the same. Note also how coff-aarch64.c short-circuits CALC_ADDEND()
altogether, which may suggest that a much simpler macro might do for the
COFF_WITH_PE case in the three arch-specific files touched here.
For (at least) Arm/WinCE this actually results in more appropriate
objdump output as well, as can be seen in the one testcase which has its
expectations adjusted (the generated binary doesn't change).
|
|
I noticed a few files double-included libcoff.h, and digging deeper I
found that the PEI_HEADERS define is a sort of external include guard.
This patch adds include guards to the few files in include/coff that
were missing one, and then removes the PEI_HEADERS workaround and the
redundant includes.
I didn't see anything in these files that indicated that
double-inclusion would be useful, so it seems to me that this approach
is ok.
Tested by rebuilding with --enable-targets=all.
2023-08-02 Tom Tromey <tromey@adacore.com>
* pei-x86_64.c (PEI_HEADERS): Do not define.
* pei-loongarch64.c (PEI_HEADERS): Do not define.
* pei-aarch64.c (PEI_HEADERS): Do not define.
* pe-x86_64.c (PEI_HEADERS): Do not define.
* pe-aarch64.c (PEI_HEADERS): Do not define.
* libpei.h (_LIBPEI_H): Add include guard.
* coff-x86_64.c (PEI_HEADERS): Do not check.
* coff-loongarch64.c (PEI_HEADERS): Do not check.
* coff-aarch64.c (PEI_HEADERS): Do not check.
include/ChangeLog
2023-08-02 Tom Tromey <tromey@adacore.com>
* coff/x86_64.h (COFF_X86_64_H): Add include guard.
* coff/loongarch64.h (COFF_LOONGARCH64_H): Add include guard.
* coff/aarch64.h (COFF_AARCH64_H): Add include guard.
|
|
Commit 0e759f232b6d regressed these tests:
rs6000-aix7.2 +FAIL: Garbage collection test 1 (32-bit)
rs6000-aix7.2 +FAIL: Garbage collection test 1 (64-bit)
rs6000-aix7.2 +FAIL: Glink test 1 (32-bit)
rs6000-aix7.2 +FAIL: Glink test 1 (64-bit)
Investigation showed segfaults in coff_section_from_bfd_index called
by xcoff_write_global_symbol due to the hash table pointer being
NULL. Well, yes, the hash table isn't initialised for the output bfd.
mkobject_hook is the wrong place to do that.
* coffcode.h: Revert 0e759f232b6d changes.
* peicode.h: Likewise.
* coff-x86_64.c (htab_hash_section_index, htab_eq_section_index):
Moved here from coffcode.h.
(coff_amd64_rtype_to_howto): Create section_by_index htab.
* coffgen.c (htab_hash_section_target_index),
(htab_eq_section_target_index): Moved here from coffcode.h.
(coff_section_from_bfd_index): Create section_by_target_index
htab. Stash newly created sections in htab.
|
|
* libcoff-in.h (struct coff_tdata): Add section_by_index and section_by_target_index hash tables.
* libcoff.h: Regenerate.
* coffcode.h (htab_hash_section_index): New function. (htab_eq_section_index): New function. (htab_hash_section_target_index): New function. (htab_eq_section_target_index): New function. (coff_mkobject_hool): Create the hash tables.
* peicode.h: Add the same new functions. (pe_mkobject_hook): Create the hash tables.
* coff-x86_64.c (coff_amd64_rtype_to_howto): Use the new tables to speed up lookups.
* coffgen.c (coff_section_from_bfd_index): Likewise. (_bfd_coff_close_and_cleanup): Delete the hash tables.
|
|
PR 30198
* coff-x86_64.c (coff_amd64_reloc): Set *error_message when
returning bfd_reloc_dangerous. Also check that __ImageBase is
defined before accessing h->u.def.
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
I expect the encoded reloc.size field originally came from aout
r_length ecoding, but somehow went wrong for 64-bit relocs (which
should have been encoded as 3). Toss all that out, just use a byte
size instead. The changes outside of reloc.c in this patch should
make the code independent of how reloc.size is encoded.
* reloc.c (struct reloc_howto_struct): Increase size field by
one bit. Comment.
(HOWTO_RSIZE): Don't encode size.
(bfd_get_reloc_size): Adjust, and make it an inline function.
(read_reloc, write_reloc): Adjust.
* bfd-in2.h: Regenerate.
* aout-ns32k.c: Include libbfd.h.
(put_reloc): Don't use howto->size directly. Calculate r_length
using bfd_log2 and bfd_get_reloc_size.
* aoutx.h (swap_std_reloc_out): Likewise.
(aout_link_reloc_link_order): Likewise.
* i386lynx.c (swap_std_reloc_out
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out
* pdp11.c (aout_link_reloc_link_order
* coff-arm.c (coff_arm_reloc): Don't use howto->size directly,
use bfd_get_reloc_size instead and adjust switch cases.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Likewise.
* cpu-ns32k.c (do_ns32k_reloc): Likewise.
* elf32-arc.c (arc_do_relocation): Likewise.
* elf32-arm.c (elf32_arm_final_link_relocate): Likewise.
* elf32-bfin.c (bfin_bfd_reloc): Likewise.
* elf32-cr16.c (cr16_elf_final_link_relocate): Likewise.
* elf32-cris.c (cris_elf_pcrel_reloc): Likewise.
* elf32-crx.c (crx_elf_final_link_relocate): Likewise.
* elf32-csky.c (csky_elf_relocate_section): Likewise.
* elf32-d10v.c (extract_rel_addend, insert_rel_addend): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-m32r.c (m32r_elf_generic_reloc): Likewise.
* elf32-nds32.c (nds32_elf_generic_reloc): Likewise.
* syms.c (_bfd_stab_section_find_nearest_line): Likewise.
* coff-rs6000.c (xcoff_ppc_relocate_section): Adjust howto.size.
* coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise.
|
|
This changes the HOWTO macro to encode the howto.size field from a
value given in bytes. This of course requires editing all target
uses of HOWTO, a major pain, but makes it a little nicer to specify
new target HOWTOs. Object files before/after this patch are
unchanged in .data and .rodata.
bfd/
* reloc.c (HOWTO_RSIZE): Encode size in bytes.
(EMPTY_HOWTO): Adjust to keep it all zero.
* aout-ns32k.c, * aoutx.h, * coff-alpha.c, * coff-arm.c,
* coff-i386.c, * coff-mcore.c, * coff-mips.c, * coff-rs6000.c,
* coff-sh.c, * coff-tic30.c, * coff-tic4x.c, * coff-tic54x.c,
* coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c,
* elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c,
* elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
* elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-gen.c,
* elf32-h8300.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c,
* elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c,
* elf32-m68hc12.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c,
* elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c,
* elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s12z.c,
* elf32-s390.c, * elf32-score.c, * elf32-score7.c,
* elf32-sh-relocs.h, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c,
* elf32-visium.c, * elf32-wasm32.c, * elf32-xc16x.c,
* elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c,
* elf32-z80.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-gen.c,
* elf64-mips.c, * elf64-mmix.c, * elf64-nfp.c, * elf64-ppc.c,
* elf64-s390.c, * elf64-x86-64.c, * elfn32-mips.c,
* elfnn-aarch64.c, * elfxx-ia64.c, * elfxx-loongarch.c,
* elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * mach-o-aarch64.c, * mach-o-arm.c,
* mach-o-i386.c, * mach-o-x86-64.c, * pdp11.c, * reloc.c,
* som.c, * vms-alpha.c: Adjust all uses of HOWTO.
* bfd-in2.h: Regenerate.
include/
* elf/arc-reloc.def: Adjust all uses of HOWTO.
|
|
Requiring C99 means that uses of bfd_uint64_t can be replaced with
uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and
BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_*
and tidies a few places that print 64-bit values.
|
|
bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
|
|
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
|
|
This (and other) code from coffcode.h is broken for x86_64_coff_vec,
and has been ever since support was added in 2006 commit 99ad839030c1
Here, bfd_coff_aoutsz must match coff_swap_aouthdr_out otherwise we
end up writing garbage.
/* Note that peicode.h fills in a PEAOUTHDR, not an AOUTHDR.
include/coff/pe.h sets AOUTSZ == sizeof (PEAOUTHDR)). */
char * buff;
bfd_size_type amount = bfd_coff_aoutsz (abfd);
buff = (char *) bfd_malloc (amount);
if (buff == NULL)
return false;
coff_swap_aouthdr_out (abfd, & internal_a, buff);
amount = bfd_bwrite (buff, amount, abfd);
We have removed support for --target=x86_64-coff, likely because it
never worked properly, but still produce coff-x86_64.o with
--enable-targets=all. This means objcopy can recognize x86_64 COFF
files but will write garbage to the output file, a fact found by
fuzzers. I suspect x86_64 COFF is still broken after this fix, and
mention of coff-x86_64.* should be removed from bfd/Makefile.am.
* coff-x86_64.c: Don't include coff/pe.h.
(COFF_WITH_pex64): Don't define here.
* pe-x86_64.c: Include coff/pe.h and other headers.
(PEI_HEADERS): Define.
|
|
* sysdep.h: POISON_BFD_BOOLEAN: Define.
* aix5ppc-core.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h,
* aoutx.h, * arc-got.h, * archive.c, * archive64.c, * archures.c,
* bfd-in.h, * bfd.c, * bfdwin.c, * binary.c, * cache.c,
* coff-alpha.c, * coff-arm.c, * coff-arm.h, * coff-bfd.c,
* coff-bfd.h, * coff-go32.c, * coff-i386.c, * coff-ia64.c,
* coff-mcore.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c,
* coff-stgo32.c, * coff-tic30.c, * coff-tic4x.c, * coff-tic54x.c,
* coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c,
* coffcode.h, * coffgen.c, * cofflink.c, * compress.c,
* corefile.c, * cpu-aarch64.c, * cpu-aarch64.h, * cpu-alpha.c,
* cpu-arc.c, * cpu-arm.c, * cpu-arm.h, * cpu-avr.c, * cpu-bfin.c,
* cpu-bpf.c, * cpu-cr16.c, * cpu-cris.c, * cpu-crx.c,
* cpu-csky.c, * cpu-d10v.c, * cpu-d30v.c, * cpu-dlx.c,
* cpu-epiphany.c, * cpu-fr30.c, * cpu-frv.c, * cpu-ft32.c,
* cpu-h8300.c, * cpu-hppa.c, * cpu-i386.c, * cpu-ia64.c,
* cpu-iamcu.c, * cpu-ip2k.c, * cpu-iq2000.c, * cpu-k1om.c,
* cpu-l1om.c, * cpu-lm32.c, * cpu-m10200.c, * cpu-m10300.c,
* cpu-m32c.c, * cpu-m32r.c, * cpu-m68hc11.c, * cpu-m68hc12.c,
* cpu-m68k.c, * cpu-m9s12x.c, * cpu-m9s12xg.c, * cpu-mcore.c,
* cpu-mep.c, * cpu-metag.c, * cpu-microblaze.c, * cpu-mips.c,
* cpu-mmix.c, * cpu-moxie.c, * cpu-msp430.c, * cpu-mt.c,
* cpu-nds32.c, * cpu-nfp.c, * cpu-nios2.c, * cpu-ns32k.c,
* cpu-or1k.c, * cpu-pdp11.c, * cpu-pj.c, * cpu-powerpc.c,
* cpu-pru.c, * cpu-riscv.c, * cpu-rl78.c, * cpu-rs6000.c,
* cpu-rx.c, * cpu-s12z.c, * cpu-s390.c, * cpu-score.c,
* cpu-sh.c, * cpu-sparc.c, * cpu-spu.c, * cpu-tic30.c,
* cpu-tic4x.c, * cpu-tic54x.c, * cpu-tic6x.c, * cpu-tilegx.c,
* cpu-tilepro.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-vax.c,
* cpu-visium.c, * cpu-wasm32.c, * cpu-xc16x.c, * cpu-xgate.c,
* cpu-xstormy16.c, * cpu-xtensa.c, * cpu-z80.c, * cpu-z8k.c,
* dwarf1.c, * dwarf2.c, * ecoff-bfd.h, * ecoff.c, * ecofflink.c,
* elf-attrs.c, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-nacl.c,
* elf-nacl.h, * elf-properties.c, * elf-s390-common.c,
* elf-s390.h, * elf-strtab.c, * elf-vxworks.c, * elf-vxworks.h,
* elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c,
* elf32-arm.h, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c,
* elf32-bfin.h, * elf32-cr16.c, * elf32-cr16.h, * elf32-cris.c,
* elf32-crx.c, * elf32-csky.c, * elf32-csky.h, * elf32-d10v.c,
* elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
* elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-gen.c,
* elf32-h8300.c, * elf32-hppa.c, * elf32-hppa.h, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c,
* elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c,
* elf32-m68k.h, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c,
* elf32-metag.h, * elf32-microblaze.c, * elf32-mips.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-nios2.h, * elf32-or1k.c, * elf32-pj.c,
* elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c,
* elf32-rx.c, * elf32-s12z.c, * elf32-s390.c, * elf32-score.c,
* elf32-score.h, * elf32-score7.c, * elf32-sh-relocs.h,
* elf32-sh.c, * elf32-sparc.c, * elf32-spu.c, * elf32-spu.h,
* elf32-tic6x.c, * elf32-tic6x.h, * elf32-tilegx.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-v850.h,
* elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c,
* elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c,
* elf32-xtensa.c, * elf32-z80.c, * elf64-alpha.c, * elf64-bpf.c,
* elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c,
* elf64-mips.c, * elf64-mmix.c, * elf64-nfp.c, * elf64-ppc.c,
* elf64-ppc.h, * elf64-s390.c, * elf64-sparc.c,
* elf64-tilegx.c, * elf64-x86-64.c, * elfcode.h,
* elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c,
* elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c,
* elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h,
* elfxx-mips.c, * elfxx-mips.h, * elfxx-riscv.c, * elfxx-riscv.h,
* elfxx-sparc.c, * elfxx-sparc.h, * elfxx-target.h,
* elfxx-tilegx.c, * elfxx-tilegx.h, * elfxx-x86.c, * elfxx-x86.h,
* format.c, * genlink.h, * hash.c, * i386aout.c, * i386lynx.c,
* i386msdos.c, * ihex.c, * libaout.h, * libbfd-in.h,
* libbfd.c, * libcoff-in.h, * libecoff.h, * libpei.h,
* libxcoff.h, * linker.c, * mach-o-aarch64.c, * mach-o-arm.c,
* mach-o-i386.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h,
* merge.c, * mmo.c, * netbsd.h, * opncls.c, * pc532-mach.c,
* pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-sh.c,
* pe-x86_64.c, * peXXigen.c, * pef.c, * pei-arm.c, * pei-i386.c,
* pei-ia64.c, * pei-mcore.c, * pei-sh.c, * pei-x86_64.c,
* peicode.h, * plugin.c, * plugin.h, * ppcboot.c, * reloc.c,
* reloc16.c, * rs6000-core.c, * section.c, * simple.c, * som.c,
* som.h, * srec.c, * stabs.c, * syms.c, * targets.c, * tekhex.c,
* verilog.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * vms.h,
* wasm-module.c, * xcofflink.c, * xcofflink.h, * xsym.c,
* xsym.h: Replace bfd_boolean with bool, FALSE with false, and
TRUE with true throughout.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
|
|
When linking Windows x86-64 relocatable object files to generate x86-64
ELF executable, we need to subtract __ImageBase, aka __executable_start,
for R_AMD64_IMAGEBASE relocation:
1. Add link_info to struct output_elf_obj_tdata to store linker info and
_bfd_get_link_info() to retrieve it.
2. Add ldelf_set_output_arch to set up link_info.
3. Add pex64_link_add_symbols to create an indirect reference to
__executable_start for __ImageBase to support R_AMD64_IMAGEBASE relocation
when adding symbols from Windows x86-64 relocatable object files to
generate x86-64 ELF executable.
4. Also subtract __ImageBase for R_AMD64_IMAGEBASE when generating x86-64
ELF executable.
bfd/
PR ld/27425
PR ld/27432
* bfd.c (_bfd_get_link_info): New function.
* elf-bfd.h (output_elf_obj_tdata): Add link_info.
(elf_link_info): New.
* libbfd-in.h (_bfd_get_link_info): New prototype.
* coff-x86_64.c (coff_amd64_reloc): Also subtract __ImageBase for
R_AMD64_IMAGEBASE when generating x86-64 ELF executable.
* pe-x86_64.c: Include "coff/internal.h" and "libcoff.h".
(pex64_link_add_symbols): New function.
(coff_bfd_link_add_symbols): New macro.
* libbfd.h: Regenerated.
ld/
PR ld/27425
PR ld/27432
* ldelf.c (ldelf_set_output_arch): New function.
* ldelf.h (ldelf_set_output_arch): New prototype.
* emultempl/elf.em (LDEMUL_SET_OUTPUT_ARCH): Default to
ldelf_set_output_arch.
* ld-x86-64/pe-x86-64-1.od: Expect __executable_start.
* testsuite/ld-x86-64/pe-x86-64-2.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-3.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-4.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-5.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-5.rd: Likewise.
* testsuite/ld-x86-64/pe-x86-64-6.obj.bz2: New file.
* testsuite/ld-x86-64/pe-x86-64-6.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64.exp: Run ld/27425 test.
|
|
bfd_perform_relocation should not have special case target code. This
patch moves the code that was there for x86_64 PE linking to ELF
output into the x86_64 PE howto special function, correcting that
function for linking to targets other than ELF too. The fixes in
bfd_perform_relocation were over-complicated due to needing to
compensate for things that had already gone wrong in coff_amd64_reloc.
In particular, an adjustment for pc-relative relocs was done in a way
that meant adjustment for things related to symbol offsets was lost.
I think those two things are orthogonal, but who knows with COFF where
addends and symbol values are found randomly in the section contents.
Note that linking natively to an x86_64 PE output relocates by
coff_pe_amd64_relocate_section, which does not use arelent relocs or
bfd_perform_relocation, but be aware of coff_amd64_rtype_to_howto
hacking addends for relocations. The adjustments for a particular
relocation type there and in coff_amd64_reloc ought to match after
taking into consideration CALC_ADDEND. They don't. For example,
the pc-relative adjustment for R_PCRWORD is 2 bytes in
coff_amd64_reloc and 4 bytes in coff_amd64_rtype_to_howto.
* reloc.c (bfd_perform_relocation): Revert 2021-01-12 and
2020-09-16 changes.
* coff-x86_64.c (coff_amd64_reloc): Do more or less the same
adjustments here instead. Separate pc-relative adjustments
from symbol related adjustments. Tidy comments and formatting.
|
|
For ELF targets, section symbols are required only for relocations.
With -ffunction-sections -fdata-sections, there can be many unused
section symbols. Sizes of libstdc++.a on Linux/x86-64 in GCC 11 are
With unused section symbols : 39411698 bytes
Without unused section symbols: 39227002 bytes
The unused section symbols in libstdc++.a occupy more than 180 KB.
Add BSF_SECTION_SYM_USED to indicate if a section symbol should be
included in the symbol table. The BSF_SECTION_SYM_USED should be set
if the section symbol is used for relocation or the section symbol is
always included in the symbol table.
Add keep_unused_section_symbols to bfd_target to indicate if unused
section symbols should be kept. If TARGET_KEEP_UNUSED_SECTION_SYMBOLS
is defined as FALSE, unused ection symbols will be removed.
Tested on Linux/x86. Other ELF backends need to:
1. Define TARGET_KEEP_UNUSED_SECTION_SYMBOLS to FALSE.
2. Mark used section symbols in assembler backend.
3. Remove unused section symbols from expected assembler and linker
outputs.
bfd/
PR 27109
* aix386-core.c (core_aix386_vec): Initialize
keep_unused_section_symbol to TARGET_KEEP_UNUSED_SECTION_SYMBOLS.
* aout-target.h (MY (vec)): Likewise.
* binary.c (binary_vec): Likewise.
* cisco-core.c (core_cisco_be_vec): Likewise.
(core_cisco_le_vec): Likewise.
* coff-alpha.c (alpha_ecoff_le_vec): Likewise.
* coff-i386.c (TARGET_SYM): Likewise.
(TARGET_SYM_BIG): Likewise.
* coff-ia64.c (TARGET_SYM): Likewise.
* coff-mips.c (mips_ecoff_le_vec): Likewise.
(mips_ecoff_be_vec): Likewise.
(mips_ecoff_bele_vec): Likewise.
* coff-rs6000.c (rs6000_xcoff_vec): Likewise.
(powerpc_xcoff_vec): Likewise.
* coff-sh.c (sh_coff_small_vec): Likewise.
(sh_coff_small_le_vec): Likewise.
* coff-tic30.c (tic30_coff_vec): Likewise.
* coff-tic54x.c (tic54x_coff0_vec): Likewise.
(tic54x_coff0_beh_vec): Likewise.
(tic54x_coff1_vec): Likewise.
(tic54x_coff1_beh_vec): Likewise.
(tic54x_coff2_vec): Likewise.
(tic54x_coff2_beh_vec): Likewise.
* coff-x86_64.c (TARGET_SYM): Likewise.
(TARGET_SYM_BIG): Likewise.
* coff64-rs6000.c (rs6000_xcoff64_vec): Likewise.
(rs6000_xcoff64_aix_vec): Likewise.
* coffcode.h (CREATE_BIG_COFF_TARGET_VEC): Likewise.
(CREATE_BIGHDR_COFF_TARGET_VEC): Likewise.
(CREATE_LITTLE_COFF_TARGET_VEC): Likewise.
* elfxx-target.h (TARGET_BIG_SYM): Likewise.
(TARGET_LITTLE_SYM): Likewise.
* hppabsd-core.c (core_hppabsd_vec): Likewise.
* hpux-core.c (core_hpux_vec): Likewise.
* i386msdos.c (i386_msdos_vec): Likewise.
* ihex.c (ihex_vec): Likewise.
* irix-core.c (core_irix_vec): Likewise.
* mach-o-target.c (TARGET_NAME): Likewise.
* mmo.c (mmix_mmo_vec): Likewise.
* netbsd-core.c (core_netbsd_vec): Likewise.
* osf-core.c (core_osf_vec): Likewise.
* pdp11.c (MY (vec)): Likewise.
* pef.c (pef_vec): Likewise.
(pef_xlib_vec): Likewise.
* plugin.c (plugin_vec): Likewise.
* ppcboot.c (powerpc_boot_vec): Likewise.
* ptrace-core.c (core_ptrace_vec): Likewise.
* sco5-core.c (core_sco5_vec): Likewise.
* som.c (hppa_som_vec): Likewise.
* srec.c (srec_vec): Likewise.
(symbolsrec_vec): Likewise.
* tekhex.c (tekhex_vec): Likewise.
* trad-core.c (core_trad_vec): Likewise.
* verilog.c (verilog_vec): Likewise.
* vms-alpha.c (alpha_vms_vec): Likewise.
* vms-lib.c (alpha_vms_lib_txt_vec): Likewise.
* wasm-module.c (wasm_vec): Likewise.
* xsym.c (sym_vec): Likewise.
* elf.c (ignore_section_sym): Return TRUE if BSF_SECTION_SYM_USED
isn't set.
(elf_map_symbols): Don't include ignored section symbols.
* elfcode.h (elf_slurp_symbol_table): Also set
BSF_SECTION_SYM_USED on STT_SECTION symbols.
* elflink.c (bfd_elf_final_link): Generated section symbols only
when emitting relocations or reqired.
* elfxx-x86.h (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New.
* syms.c (BSF_SECTION_SYM_USED): New.
* targets.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New.
(bfd_target): Add keep_unused_section_symbols.
(bfd_keep_unused_section_symbols): New.
* bfd-in2.h: Regenerated.
binutils/
PR 27109
* objcopy.c (copy_object): Handle section symbols for
non-relocatable inputs.
* testsuite/binutils-all/readelf.exp (readelf_test): Check
is_elf_unused_section_symbols.
* testsuite/binutils-all/readelf.s-64: Updated.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: New file.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss-unused: Likewise.
* testsuite/lib/binutils-common.exp
(is_elf_unused_section_symbols): New proc.
gas/ChangeLog:
PR 27109
* read.c (s_reloc): Call symbol_mark_used_in_reloc on the
section symbol.
* subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed.
* write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc
on the section symbol.
(set_symtab): Don't generate unused section symbols.
(maybe_generate_build_notes): Call symbol_mark_used_in_reloc
on the section symbol.
* config/obj-elf.c (elf_adjust_symtab): Call
symbol_mark_used_in_reloc on the group signature symbol.
* testsuite/gas/cfi/cfi-label.d: Remove unused section symbols
from expected output.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Check
is_elf_unused_section_symbols.
* testsuite/gas/elf/section2.e: Updated.
* testsuite/gas/elf/section2.e-unused: New file.
* testsuite/gas/elf/symver.d: Remove unused section symbols.
* testsuite/gas/i386/ilp32/elf/symver.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise.
* testsuite/gas/i386/size-1.d: Likewise.
* testsuite/gas/i386/size-3.d: Likewise.
* testsuite/gas/i386/svr4.d: Likewise.
* testsuite/gas/i386/x86-64-size-1.d: Likewise.
* testsuite/gas/i386/x86-64-size-3.d: Likewise.
* testsuite/gas/i386/x86-64-size-5.d: Likewise.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
ld/
PR 27109
* testsuite/ld-elf/export-class.sd: Adjust the expected output.
* testsuite/ld-elf/loadaddr3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/pr19636-1d.d: Likewise.
* testsuite/ld-i386/pr19636-1l.d: Likewise.
* testsuite/ld-i386/pr19636-2c.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise.
* testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-i386.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise.
* testsuite/ld-ifunc/pr17154-x86-64.d: Likewise.
* testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
* testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
* testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/pr19609-4e.d: Likewise.
* testsuite/ld-x86-64/pr19609-6a.d: Likewise.
* testsuite/ld-x86-64/pr19609-6b.d: Likewise.
* testsuite/ld-x86-64/pr19609-7b.d: Likewise.
* testsuite/ld-x86-64/pr19609-7d.d: Likewise.
* testsuite/ld-x86-64/pr19636-2l.d: Likewise.
* testsuite/ld-x86-64/pr20253-1d.d: Likewise.
* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
* testsuite/ld-x86-64/pr21038b-now.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c-now.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
* testsuite/ld-x86-64/pr23854.d: Likewise.
* testsuite/ld-x86-64/pr25416-3.d: Likewise.
* testsuite/ld-x86-64/pr25416-4.d: Likewise.
* testsuite/ld-i386/plt-pic.pd: Likewise.
* testsuite/ld-i386/plt-pic2.dd: Likewise.
* testsuite/ld-i386/plt.pd: Likewise.
* testsuite/ld-i386/plt2.dd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbin2.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-i386/tlspic2.rd: Likewise.
* testsuite/ld-x86-64/mpx3.dd: Likewise.
* testsuite/ld-x86-64/mpx3n.dd: Likewise.
* testsuite/ld-x86-64/mpx4.dd: Likewise.
* testsuite/ld-x86-64/mpx4n.dd: Likewise.
* testsuite/ld-x86-64/pe-x86-64-1.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-2.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-3.od: Likewise.
* testsuite/ld-x86-64/pe-x86-64-4.od: Likewise.
* testsuite/ld-x86-64/plt.pd: Likewise.
* testsuite/ld-x86-64/plt2.dd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.rd: Likewise.
* testsuite/ld-elf/sec64k.exp: Check
is_elf_unused_section_symbols.
|
|
|
|
For PE/x86-64, display PE relocation names:
R_X86_64_64 -> IMAGE_REL_AMD64_ADDR64
R_X86_64_32 -> IMAGE_REL_AMD64_ADDR32.
rva32 -> IMAGE_REL_AMD64_ADDR32NB
R_X86_64_PC32 -> IMAGE_REL_AMD64_REL32
DISP32+1 -> IMAGE_REL_AMD64_REL32_1
DISP32+2 -> IMAGE_REL_AMD64_REL32_2
DISP32+3 -> IMAGE_REL_AMD64_REL32_3
DISP32+4 -> IMAGE_REL_AMD64_REL32_4
DISP32+5 -> IMAGE_REL_AMD64_REL32_5
secrel32 -> IMAGE_REL_AMD64_SECREL
bfd/
* coff-x86_64.c (howto_table): Display PE relocation names.
gas/
* testsuite/gas/cfi/reloc-pe-i386.d: Updated.
* testsuite/gas/i386/x86-64-w64-pcrel.d: Likewise.
|
|
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
|
|
|
|
and other tidies. I think it's better to default to passing the
section to bfd_octets_per_byte, even in cases where we know it won't
make a difference.
A number of the coff reloc functions used bfd_octets_per_byte wrongly,
not factoring it into the offset into the data buffer. As it happens,
the targets using those files always had bfd_octets_per_byte equal to
one, so there wasn't any detectable wrong behaviour. However, it is
wrong in the source and might cause trouble for anyone creating a new
target. Besides fixing that, the patch also defines OCTETS_PER_BYTE
as one in target files where that is appropriate.
bfd/
* archures.c (bfd_octets_per_byte): Tail call
bfd_arch_mach_octets_per_byte.
* coff-arm.c (OCTETS_PER_BYTE): Define.
(coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE
with section. Correct "addr". Remove ATTRIBUTE_UNUSED.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-mips.c (mips_reflo_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Similarly.
* elf32-msp430.c (OCTETS_PER_BYTE): Define.
(rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section.
* elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly.
* elf32-s12z.c (opru18_reloc): Similarly.
* elf32-sh.c (sh_elf_reloc): Similarly.
* elf32-spu.c (spu_elf_rel9): Similarly.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly.
* elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc),
(ppc64_elf_toc64_reloc): Similarly.
* bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte.
* cofflink.c (_bfd_coff_link_input_bfd),
(_bfd_coff_reloc_link_order): Likewise.
* elf.c (_bfd_elf_section_offset): Likewise.
* elflink.c (resolve_section, bfd_elf_perform_complex_relocation),
(elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order),
(bfd_elf_final_link): Likewise.
* elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice
to set SEC_ELF_OCTETS.
* reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case.
(bfd_install_relocation): Likewise.
(_bfd_final_link_relocate): Don't recalculate octets.
* syms.c (_bfd_stab_section_find_nearest_line): Introduc new
"octets" temp.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (fold_name): Pass section to bfd_octets_per_byte.
* ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte
unnecessarily.
|
|
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
|
|
* coff-i386.c, * coff-x86_64.c, * coffgen.c, * dwarf2.c,
* elf-m10200.c, * elf.c, * elf32-arm.c, * elf32-bfin.c,
* elf32-csky.c, * elf32-m32r.c, * elf32-microblaze.c, * elf32-pru.c,
* elf32-rx.c, * elf32-xgate.c, * elf64-sparc.c, * elfnn-ia64.c,
* elfxx-riscv.c, * elfxx-sparc.c, * linker.c, * mach-o.c,
* pe-x86_64.c, * pei-x86_64.c, * plugin.c: Whitespace fixes.
|
|
|
|
This patch defines a bunch of new functions to use in the BFD target
structs rather than casting bfd_false or bfd_true and similar stub
functions. I've also renamed the stub functions to reflect their
parameters and put "error" in the name if they set bfd_error. The
latter change is important since there were quite a few uses of
bfd_false where setting bfd_error was inappropriate, for example in
elf_backend_allow_non_load_phdr and is_target_special_symbol.
* libbfd.c (_bfd_bool_bfd_false_error): Rename from bfd_false.
(_bfd_bool_bfd_true): Rename from bfd_true.
(_bfd_ptr_bfd_null_error): Rename from bfd_nullvoidptr.
(_bfd_int_bfd_0): Rename from bfd_0.
(_bfd_uint_bfd_0): Rename from bfd_0u.
(_bfd_long_bfd_0): Rename from bfd_0l.
(_bfd_long_bfd_n1_error): Rename from _bfd_n1.
(_bfd_void_bfd): Rename from bfd_void.
(_bfd_bool_bfd_false, _bfd_bool_bfd_asymbol_false),
(_bfd_bool_bfd_link_false_error),
(_bfd_bool_bfd_link_true, _bfd_bool_bfd_bfd_true),
(_bfd_bool_bfd_uint_true, _bfd_bool_bfd_ptr_true),
(_bfd_bool_bfd_asection_bfd_asection_true),
(_bfd_bool_bfd_asymbol_bfd_asymbol_true),
(_bfd_void_bfd_link, _bfd_void_bfd_asection): New functions.
* archive.c (_bfd_noarchive_get_elt_at_index),
(_bfd_noarchive_openr_next_archived_file),
(_bfd_noarchive_construct_extended_name_table),
(_bfd_noarchive_write_ar_hdr, _bfd_noarchive_truncate_arname),
(_bfd_noarchive_write_armap): New functions.
* archures.c (_bfd_nowrite_set_arch_mach): New function.
* coff-alpha.c (alpha_ecoff_swap_coff_aux_in),
(alpha_ecoff_swap_coff_sym_in, alpha_ecoff_swap_coff_lineno_in),
(alpha_ecoff_swap_coff_aux_out, alpha_ecoff_swap_coff_sym_out),
(alpha_ecoff_swap_coff_lineno_out),
(alpha_ecoff_swap_coff_reloc_out): New functions.
* coff-mips.c (mips_ecoff_swap_coff_aux_in),
(mips_ecoff_swap_coff_sym_in, mips_ecoff_swap_coff_lineno_in),
(mips_ecoff_swap_coff_aux_out, mips_ecoff_swap_coff_sym_out),
(mips_ecoff_swap_coff_lineno_out),
(mips_ecoff_swap_coff_reloc_out): New functions.
* coffcode.h (coff_set_alignment_hook): Replace define with
new function.
(symname_in_debug_hook): Likewise.
* ecoff.c (_bfd_ecoff_set_alignment_hook): New function.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Default to 0.
* elf.c (assign_file_positions_except_relocs): Test
elf_backend_allow_non_load_phdr for NULL.
* elflink.c (_bfd_elf_omit_section_dynsym_default): Rename from
_bfd_elf_link_omit_section_dynsym. Update uses.
(_bfd_elf_omit_section_dynsym_all): New function.
* elf-bfd.h (_bfd_elf_link_omit_section_dynsym): Delete.
(_bfd_elf_omit_section_dynsym_default): Declare.
(_bfd_elf_omit_section_dynsym_all): Declare.
* linker.c (_bfd_nolink_sizeof_headers, _bfd_nolink_bfd_relax_section),
(_bfd_nolink_bfd_get_relocated_section_contents),
(_bfd_nolink_bfd_lookup_section_flags),
(_bfd_nolink_bfd_is_group_section, _bfd_nolink_bfd_discard_group),
(_bfd_nolink_bfd_link_hash_table_create),
(_bfd_nolink_bfd_link_just_syms),
(_bfd_nolink_bfd_copy_link_hash_symbol_type),
(_bfd_nolink_bfd_link_split_section),
(_bfd_nolink_section_already_linked),
(_bfd_nolink_bfd_define_common_symbol),
(_bfd_nolink_bfd_define_start_stop): New functions.
* reloc.c (_bfd_norelocs_bfd_reloc_type_lookup),
(_bfd_norelocs_bfd_reloc_name_lookup),
(_bfd_nodynamic_canonicalize_dynamic_reloc): New functions.
* section.c (_bfd_nowrite_set_section_contents): New function.
* syms.c (_bfd_nosymbols_canonicalize_symtab),
(_bfd_nosymbols_print_symbol, _bfd_nosymbols_get_symbol_info),
(_bfd_nosymbols_get_symbol_version_string),
(_bfd_nosymbols_bfd_is_local_label_name),
(_bfd_nosymbols_get_lineno, _bfd_nosymbols_find_nearest_line),
(_bfd_nosymbols_find_line, _bfd_nosymbols_find_inliner_info),
(_bfd_nosymbols_bfd_make_debug_symbol),
( _bfd_nosymbols_read_minisymbols),
( _bfd_nosymbols_minisymbol_to_symbol),
(_bfd_nodynamic_get_synthetic_symtab): New functions.
* libbfd-in.h: Declare new functions. Update existing defines,
removing casts.
* aix386-core.c: Update to use new hooks. Formatting.
* aout-adobe.c: Likewise.
* aout-arm.c: Likewise.
* aout-target.h: Likewise.
* aout-tic30.c: Likewise.
* aoutf1.h: Likewise.
* binary.c: Likewise.
* bout.c: Likewise.
* cisco-core.c: Likewise.
* coff-alpha.c: Likewise.
* coff-i386.c: Likewise.
* coff-i860.c: Likewise.
* coff-i960.c: Likewise.
* coff-ia64.c: Likewise.
* coff-mips.c: Likewise.
* coff-ppc.c: Likewise.
* coff-rs6000.c: Likewise.
* coff-sh.c: Likewise.
* coff-tic30.c: Likewise.
* coff-tic54x.c: Likewise.
* coff-x86_64.c: Likewise.
* coff64-rs6000.c: Likewise.
* coffcode.h: Likewise.
* elf-m10300.c: Likewise.
* elf32-cr16.c: Likewise.
* elf32-lm32.c: Likewise.
* elf32-m32r.c: Likewise.
* elf32-metag.c: Likewise.
* elf32-score.c: Likewise.
* elf32-score7.c: Likewise.
* elf32-tilepro.c: Likewise.
* elf32-xstormy16.c: Likewise.
* elf32-xtensa.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-hppa.c: Likewise.
* elf64-ia64-vms.c: Likewise.
* elf64-mmix.c: Likewise.
* elf64-sh64.c: Likewise.
* elfnn-ia64.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-target.h: Likewise.
* elfxx-tilegx.c: Likewise.
* elfxx-x86.h: Likewise.
* hp300hpux.c: Likewise.
* hppabsd-core.c: Likewise.
* hpux-core.c: Likewise.
* i386msdos.c: Likewise.
* i386os9k.c: Likewise.
* ieee.c: Likewise.
* ihex.c: Likewise.
* irix-core.c: Likewise.
* libaout.h: Likewise.
* libecoff.h: Likewise.
* mach-o-target.c: Likewise.
* mach-o.c: Likewise.
* mipsbsd.c: Likewise.
* mmo.c: Likewise.
* netbsd-core.c: Likewise.
* nlm-target.h: Likewise.
* oasys.c: Likewise.
* osf-core.c: Likewise.
* pdp11.c: Likewise.
* pe-mips.c: Likewise.
* pe-x86_64.c: Likewise.
* pef.c: Likewise.
* plugin.c: Likewise.
* ppcboot.c: Likewise.
* ptrace-core.c: Likewise.
* sco5-core.c: Likewise.
* som.c: Likewise.
* sparclynx.c: Likewise.
* srec.c: Likewise.
* tekhex.c: Likewise.
* trad-core.c: Likewise.
* verilog.c: Likewise.
* versados.c: Likewise.
* vms-alpha.c: Likewise.
* vms-lib.c: Likewise.
* wasm-module.c: Likewise.
* xsym.c: Likewise.
* libbfd.h: Regenerate.
|
|
|
|
Binutils is supposed to use tabs. In my git config I have
whitespace = indent-with-non-tab,space-before-tab,trailing-space
and I got annoyed enough seeing red in "git diff" output to fix
the problems.
* doc/header.sed: Trim trailing space when splitting lines.
* aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c,
* aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h,
* arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c,
* archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c,
* bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c,
* coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c,
* coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c,
* coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c,
* coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c,
* coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c,
* cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c,
* cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c,
* cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c,
* cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c,
* cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c,
* cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c,
* cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c,
* ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c,
* elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c,
* elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c,
* elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h,
* elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c,
* elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c,
* elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c,
* elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c,
* elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c,
* elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c,
* elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c,
* elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h,
* elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c,
* elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c,
* elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c,
* elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c,
* elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c,
* elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h,
* elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c,
* elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c,
* elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c,
* host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c,
* i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c,
* i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h,
* libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h,
* libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c,
* m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c,
* mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c,
* mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h,
* netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c,
* nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c,
* opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c,
* pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c,
* pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c,
* peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c,
* riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h,
* sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c,
* syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c,
* vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c,
* vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c,
* xsym.c, * xsym.h: Whitespace fixes.
* bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
|
|
with a relocation that points beyond the end of the section to be relocated.
PR 22506
* reloc.c (reloc_offset_in_range): Rename to
bfd_reloc_offset_in_range and export.
(bfd_perform_relocation): Rename function invocation.
(bfd_install_relocation): Likewise.
(bfd_final_link_relocate): Likewise.
* bfd-in2.h: Regenerate.
* coff-arm.c (coff_arm_reloc): Use bfd_reloc_offset_in_range.
* coff-i386.c (coff_i386_reloc): Likewise.
* coff-i860.c (coff_i860_reloc): Likewise.
* coff-m68k.c (mk68kcoff_common_addend_special_fn): Likewise.
* coff-m88k.c (m88k_special_reloc): Likewise.
* coff-mips.c (mips_reflo_reloc): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise.
|
|
long long isn't supposed to be used without a configure test, to
support ancient compilers. Probably not terribly important nowadays.
* bfd.c (bfd_scan_vma): Don't use long long unless HAVE_LONG_LONG.
* coff-rs6000.c (FMT20): Handle hosts with 64-bit long and
Microsoft C library variant of long long format specifier.
(PRINT20): Cast value to bfd_uint64_t not long long.
* coffcode.h (coff_print_aux): Use BFD_VMA_FMT.
* coff-x86_64.c (coff_amd64_reloc): Use bfd_uint64_t rather than
long long. Don't cast to bfd_vma.
* elf32-score.c (score3_bfd_getl48): Likewise.
* vms-alpha.c (_bfd_vms_slurp_eisd): Likewise.
|
|
|
|
PR ld/17955
* coff-x86_64.c (coff_amd64_rtype_to_howto): Use an 8 byte offset
for R_AMD64_PCRQUAD relocations.
|
|
|
|
* coff-x86_64.c (coff_amd64_reloc): Fix formatting.
|
|
The "shared" field in bfd_link_info is set for both DSO and and PIE.
There are separate fields for executable and relocatable outputs. This
patch adds an "output_type" field:
enum output_type
{
type_unknown = 0,
type_executable,
type_dll,
type_relocatable
};
and a "pic" field to bfd_link_info to replace shared, executable and
relocatable fields so that we can use the "output_type" field to check
for output type and the "pic" field check if output is PIC. Macros,
bfd_link_executable, bfd_link_dll, bfd_link_relocatable, bfd_link_pic
and bfd_link_pie, are provided to check for output features.
bfd/
* bfd/aoutx.h: Replace shared, executable, relocatable and pie
fields with bfd_link_executable, bfd_link_dll,
bfd_link_relocatable, bfd_link_pic and bfd_link_pie.
* bfd/bout.c: Likewise.
* bfd/coff-alpha.c: Likewise.
* bfd/coff-arm.c: Likewise.
* bfd/coff-i386.c: Likewise.
* bfd/coff-i960.c: Likewise.
* bfd/coff-m68k.c: Likewise.
* bfd/coff-mcore.c: Likewise.
* bfd/coff-mips.c: Likewise.
* bfd/coff-ppc.c: Likewise.
* bfd/coff-rs6000.c: Likewise.
* bfd/coff-sh.c: Likewise.
* bfd/coff-tic80.c: Likewise.
* bfd/coff-x86_64.c: Likewise.
* bfd/coff64-rs6000.c: Likewise.
* bfd/coffgen.c: Likewise.
* bfd/cofflink.c: Likewise.
* bfd/ecoff.c: Likewise.
* bfd/ecofflink.c: Likewise.
* bfd/elf-bfd.h: Likewise.
* bfd/elf-eh-frame.c: Likewise.
* bfd/elf-ifunc.c: Likewise.
* bfd/elf-m10200.c: Likewise.
* bfd/elf-m10300.c: Likewise.
* bfd/elf-s390-common.c: Likewise.
* bfd/elf-vxworks.c: Likewise.
* bfd/elf.c: Likewise.
* bfd/elf32-arm.c: Likewise.
* bfd/elf32-avr.c: Likewise.
* bfd/elf32-bfin.c: Likewise.
* bfd/elf32-cr16.c: Likewise.
* bfd/elf32-cr16c.c: Likewise.
* bfd/elf32-cris.c: Likewise.
* bfd/elf32-crx.c: Likewise.
* bfd/elf32-d10v.c: Likewise.
* bfd/elf32-dlx.c: Likewise.
* bfd/elf32-epiphany.c: Likewise.
* bfd/elf32-fr30.c: Likewise.
* bfd/elf32-frv.c: Likewise.
* bfd/elf32-ft32.c: Likewise.
* bfd/elf32-h8300.c: Likewise.
* bfd/elf32-hppa.c: Likewise.
* bfd/elf32-i370.c: Likewise.
* bfd/elf32-i386.c: Likewise.
* bfd/elf32-i860.c: Likewise.
* bfd/elf32-ip2k.c: Likewise.
* bfd/elf32-iq2000.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-m32c.c: Likewise.
* bfd/elf32-m32r.c: Likewise.
* bfd/elf32-m68hc11.c: Likewise.
* bfd/elf32-m68hc1x.c: Likewise.
* bfd/elf32-m68k.c: Likewise.
* bfd/elf32-mcore.c: Likewise.
* bfd/elf32-mep.c: Likewise.
* bfd/elf32-metag.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-moxie.c: Likewise.
* bfd/elf32-msp430.c: Likewise.
* bfd/elf32-mt.c: Likewise.
* bfd/elf32-nds32.c: Likewise.
* bfd/elf32-nios2.c: Likewise.
* bfd/elf32-or1k.c: Likewise.
* bfd/elf32-ppc.c: Likewise.
* bfd/elf32-rl78.c: Likewise.
* bfd/elf32-rx.c: Likewise.
* bfd/elf32-s390.c: Likewise.
* bfd/elf32-score.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-sh-symbian.c: Likewise.
* bfd/elf32-sh.c: Likewise.
* bfd/elf32-sh64.c: Likewise.
* bfd/elf32-spu.c: Likewise.
* bfd/elf32-tic6x.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elf32-v850.c: Likewise.
* bfd/elf32-vax.c: Likewise.
* bfd/elf32-visium.c: Likewise.
* bfd/elf32-xc16x.c: Likewise.
* bfd/elf32-xstormy16.c: Likewise.
* bfd/elf32-xtensa.c: Likewise.
* bfd/elf64-alpha.c: Likewise.
* bfd/elf64-hppa.c: Likewise.
* bfd/elf64-ia64-vms.c: Likewise.
* bfd/elf64-mmix.c: Likewise.
* bfd/elf64-ppc.c: Likewise.
* bfd/elf64-s390.c: Likewise.
* bfd/elf64-sh64.c: Likewise.
* bfd/elf64-x86-64.c: Likewise.
* bfd/elflink.c: Likewise.
* bfd/elfnn-aarch64.c: Likewise.
* bfd/elfnn-ia64.c: Likewise.
* bfd/elfxx-mips.c: Likewise.
* bfd/elfxx-sparc.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/i386linux.c: Likewise.
* bfd/linker.c: Likewise.
* bfd/m68klinux.c: Likewise.
* bfd/pdp11.c: Likewise.
* bfd/pe-mips.c: Likewise.
* bfd/peXXigen.c: Likewise.
* bfd/reloc.c: Likewise.
* bfd/reloc16.c: Likewise.
* bfd/sparclinux.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/vms-alpha.c: Likewise.
* bfd/xcofflink.c: Likewise.
include/
* include/bfdlink.h (output_type): New enum.
(bfd_link_executable): New macro.
(bfd_link_dll): Likewise.
(bfd_link_relocatable): Likewise.
(bfd_link_pic): Likewise.
(bfd_link_pie): Likewise.
(bfd_link_info): Remove shared, executable, pie and relocatable.
Add output_type and pic.
ld/
* ld/ldctor.c: Replace shared, executable, relocatable and pie
fields with bfd_link_executable, bfd_link_dll,
bfd_link_relocatable, bfd_link_pic and bfd_link_pie.
* ld/ldemul.c: Likewise.
* ld/ldfile.c: Likewise.
* ld/ldlang.c: Likewise.
* ld/ldmain.c: Likewise.
* ld/ldwrite.c: Likewise.
* ld/lexsup.c: Likewise.
* ld/pe-dll.c: Likewise.
* ld/plugin.c: Likewise.
* ld/emultempl/aarch64elf.em: Likewise.
* ld/emultempl/aix.em: Likewise.
* ld/emultempl/alphaelf.em: Likewise.
* ld/emultempl/armcoff.em: Likewise.
* ld/emultempl/armelf.em: Likewise.
* ld/emultempl/avrelf.em: Likewise.
* ld/emultempl/beos.em: Likewise.
* ld/emultempl/cr16elf.em: Likewise.
* ld/emultempl/elf-generic.em: Likewise.
* ld/emultempl/elf32.em: Likewise.
* ld/emultempl/genelf.em: Likewise.
* ld/emultempl/generic.em: Likewise.
* ld/emultempl/gld960.em: Likewise.
* ld/emultempl/gld960c.em: Likewise.
* ld/emultempl/hppaelf.em: Likewise.
* ld/emultempl/irix.em: Likewise.
* ld/emultempl/linux.em: Likewise.
* ld/emultempl/lnk960.em: Likewise.
* ld/emultempl/m68hc1xelf.em: Likewise.
* ld/emultempl/m68kcoff.em: Likewise.
* ld/emultempl/m68kelf.em: Likewise.
* ld/emultempl/metagelf.em: Likewise.
* ld/emultempl/mipself.em: Likewise.
* ld/emultempl/mmo.em: Likewise.
* ld/emultempl/msp430.em: Likewise.
* ld/emultempl/nds32elf.em: Likewise.
* ld/emultempl/needrelax.em: Likewise.
* ld/emultempl/nios2elf.em: Likewise.
* ld/emultempl/pe.em: Likewise.
* ld/emultempl/pep.em: Likewise.
* ld/emultempl/ppc32elf.em: Likewise.
* ld/emultempl/ppc64elf.em: Likewise.
* ld/emultempl/sh64elf.em: Likewise.
* ld/emultempl/solaris2.em: Likewise.
* ld/emultempl/spuelf.em: Likewise.
* ld/emultempl/sunos.em: Likewise.
* ld/emultempl/tic6xdsbt.em: Likewise.
* ld/emultempl/ticoff.em: Likewise.
* ld/emultempl/v850elf.em: Likewise.
* ld/emultempl/vms.em: Likewise.
* ld/emultempl/vxworks.em: Likewise.
|
|
|
|
Removes a bunch of unused functions from libbfd when building ELF or
AOUT. Split off the bits we need externally when not building a COFF
target into coff-bfd.c and coff-bfd.h.
bfd/
* Makefile.am (BFD32_LIBS, BFD32_LIBS_CFILES): Remove dwarf2
and coffgen. Add coff-bfd. Sort.
(BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add coffgen and dwarf2.
* bfd-in.h (bfd_coff_get_syment, bfd_coff_get_auxent): Delete.
(struct coff_comdat_info, bfd_coff_get_comdat_section): Delete.
* coffgen.c (coff_symbol_from): Move to coff-bfd.h as macro,
without unused param. Update uses.
(bfd_coff_get_comdat_section): Move to coff-bfd.h as macro.
(bfd_coff_get_syment, bfd_coff_get_auxent): Move to coff-bfd.c.
* libcoff-in.h: #include "coff-bfd.h".
(struct coff_section_tdata, coff_section_data): Move to coff-bfd.h.
(coff_symbol_from): Delete.
* coff-bfd.c: New file.
* coff-bfd.h: New file.
* coff-i386.c: Update coff_symbol_from occurrences.
* coff-i960.c: Likewise.
* coff-m68k.c: Likewise.
* coff-sh.c: Likewise.
* coff-x86_64.c: Likewise.
* coffcode.h: Likewise.
* pe-mips.c: Likewise.
* configure.ac (elf): Add dwarf2.lo.
(coffgen, coff, ecoff, xcoff): Define. Use when mapping bfd
target vectors to .o files. Add dwarf2 for mach-o targets.
Fix the sh target FIXME.
* po/SRC-POTFILES.in: Regenerate.
* Makefile.in: Regenerate.
* configure: Regenerate.
* bfd-in2.h: Regenerate.
* libcoff.h: Regenerate.
binutils/
* objdump.c: #include "coff-bfd.h".
ld/
* ldmisc.c: #include "coff-bfd.h"
|
|
corrupted binaries.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
|
|
when displaying the contents of corrupt files.
PR binutils/17521
* coff-i386.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_i386_rtype_to_howto): Likewise.
(coff_i386_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coff-x86_64.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_amd64_rtype_to_howto): Likewise.
(coff_amd64_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coffcode.h (coff_slurp_line_table): Check for symbol table
indexing underflow.
(coff_slurp_symbol_table): Use zalloc to ensure that all table
entries are initialised.
* coffgen.c (_bfd_coff_read_string_table): Initialise unused bits
in the string table. Also ensure that the table is 0 terminated.
(coff_get_normalized_symtab): Check for symbol table indexing
underflow.
* opncls.c (bfd_alloc): Catch the case where a small negative size
can result in only 1 byte being allocated.
(bfd_alloc2): Use bfd_alloc.
* pe-mips.c (NUM_HOWTOS): New define.
(coff_mips_reloc_name_lookup): Use it.
(CALC_ADDEND): Check that reloc r_type field is valid.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Initialise unused entries
in the DataDirectory.
(pe_print_idata): Avoid reading beyond the end of the data block
wen printing strings.
(pe_print_edata): Likewise.
Check for table indexing underflow.
* peicode.h (pe_mkobject): Initialise the pe_opthdr field.
(pe_bfd_object_p): Allocate and initialize enough space to hold a
PEAOUTHDR, even if the opt_hdr field specified less.
|
|
When bfd_find_nearest_line_discriminator was added, not enough care
was taken to ensure all targets had a proper definition of the function.
This patch cures that by merging bfd_find_nearest_line_discriminator
and bfd_find_nearest_line target implementations.
PR 17481
* aoutx.h (NAME (aout, find_nearest_line)): Add "discriminator_ptr"
param, group "section" and "offset" params. Zero discriminator.
* bfd.c (bfd_find_nearest_line): Implement with new
_bfd_find_nearest_line.
(bfd_find_nearest_line_discriminator): Likewise.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff-rs6000.c (xcoff_find_nearest_line,
xcoff_find_nearest_line_discriminator): Delete.
(_bfd_xcoff_find_nearest_line): Don't define.
(_bfd_xcoff_find_nearest_line): Define as coff_find_nearest_line.
* coff-x86_64.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Adjust.
* coffgen.c (coff_find_nearest_line_with_names): Reorder params,
adjust _bfd_dwarf2_find_nearest_line call.
(coff_find_nearest_line): Add "discriminator_ptr" param, reorder
others. Set discriminator. Adjust call.
(coff_find_nearest_line_discriminator): Delete.
* dwarf1.c (_bfd_dwarf1_find_nearest_line): Reorder params.
* dwarf2.c (find_line): Rename to..
(_bfd_dwarf2_find_nearest_line): ..this, reordering params.
Simplify setting of do_line. Delete old function.
(_bfd_dwarf2_find_line): Delete.
* ecoff.c (_bfd_ecoff_find_nearest_line): Reorder params, add
discriminator_ptr and set it.
* elf-bfd.h (_bfd_elf_find_nearest_line): Update prototype.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
* elf.c (elf_find_function): Reorder params.
(_bfd_elf_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line): Adjust call.
* elf32-arm.c (arm_elf_find_function): Reorder params.
(elf32_arm_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Similarly.
* elfnn-aarch64.c (aarch64_elf_find_function): Reorder params.
(elfNN_aarch64_find_nearest_line): Reorder params, add
discriminator_ptr. Adjust calls.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly.
* elfxx-mips.h (_bfd_mips_elf_find_nearest_line): Update prototype.
* libaout.h (NAME (aout, find_nearest_line)): Update prototype.
* libbfd-in.h (_bfd_nosymbols_find_nearest_line): Update.
(_bfd_dwarf1_find_nearest_line): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise.
(_bfd_dwarf2_find_line): Delete.
(_bfd_generic_find_nearest_line_discriminator): Delete.
* libbfd.c (_bfd_generic_find_nearest_line_discriminator): Delete.
* libcoff-in.h (coff_find_nearest_line): Update prototype.
(coff_find_nearest_line_discriminator): Delete.
(coff_find_nearest_line_with_names): Update prototype.
* libecoff.h (_bfd_ecoff_find_nearest_line): Update prototype.
* mach-o.c (bfd_mach_o_find_nearest_line): Reorder params, add
discriminator_ptr. Adjust calls.
* mach-o.h (bfd_mach_o_find_nearest_line): Update prototype.
* pdp11.c (NAME (aout, find_nearest_line)): Reorder params, add
discriminator_ptr and set.
* som.c (som_find_nearest_line): Similarly.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Delete entry for
_bfd_find_nearest_line_discriminator.
(struct bfd_target <_bfd_find_nearest_line>): Adjust prototype.
(struct bfd_target <_bfd_find_nearest_line_discriminator>): Delete.
* vms-alpha.c (_bfd_vms_find_nearest_dst_line): Rename to..
(_bfd_vms_find_nearest_line): ..this. Reorder params, add
"discriminator" and set.
(_bfd_vms_find_nearest_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
(alpha_vms_find_nearest_line): Update define.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
|
|
This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec.
So for example, bfd_elf32_ntradlittlemips_vec becomes
mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec.
bfd/
* aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c,
* aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c,
* cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c,
* coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c,
* coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c,
* coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c,
* coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c,
* coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c,
* coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c,
* coff64-rs6000.c, * config.bfd, * configure.com, * configure.in,
* demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c,
* elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c,
* elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c,
* elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
* elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c,
* elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c,
* elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c,
* elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c,
* elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c,
* elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c,
* elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c,
* elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c,
* elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c,
* elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c,
* elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c,
* elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c,
* elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c,
* elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c,
* elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c,
* elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c,
* epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c,
* hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c,
* i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c,
* i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c,
* irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c,
* m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c,
* makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c,
* nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c,
* ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c,
* pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c,
* pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c,
* pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c,
* pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c,
* sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c,
* sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c,
* vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c,
* vms-alpha.c, * vms-lib.c: Rename bfd targets to
<cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros
on aout targets.
* configure: Regenerate.
binutils/
* emul_aix.c: Update bfd target vector naming.
* testsuite/binutils-all/objcopy.exp: Likewise.
ld/
* emultempl/metagelf.em: Update bfd target vector naming.
* emultempl/nios2elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/tic6xdsbt.em: Likewise.
|
|
|
|
* aout0.c: Remove trailing white spaces.
* archive.c: Likewise.
* archures.c: Likewise.
* bfd-in.h: Likewise.
* bfd-in2.h: Likewise.
* coff-alpha.c: Likewise.
* coff-i860.c: Likewise.
* coff-mips.c: Likewise.
* coff-ppc.c: Likewise.
* coff-tic80.c: Likewise.
* coff-x86_64.c: Likewise.
* coff-z80.c: Likewise.
* coffcode.h: Likewise.
* coffgen.c: Likewise.
* cofflink.c: Likewise.
* compress.c: Likewise.
* corefile.c: Likewise.
* cpu-arm.c: Likewise.
* cpu-avr.c: Likewise.
* cpu-bfin.c: Likewise.
* cpu-cr16.c: Likewise.
* cpu-cr16c.c: Likewise.
* cpu-crx.c: Likewise.
* cpu-h8300.c: Likewise.
* cpu-i386.c: Likewise.
* cpu-lm32.c: Likewise.
* cpu-m68k.c: Likewise.
* cpu-moxie.c: Likewise.
* cpu-msp430.c: Likewise.
* cpu-sh.c: Likewise.
* cpu-xc16x.c: Likewise.
* dwarf2.c: Likewise.
* ecofflink.c: Likewise.
* ecoffswap.h: Likewise.
* elf-ifunc.c: Likewise.
* elf-m10300.c: Likewise.
* elf-vxworks.c: Likewise.
* elf32-avr.c: Likewise.
* elf32-avr.h: Likewise.
* elf32-cr16.c: Likewise.
* elf32-cr16c.c: Likewise.
* elf32-cris.c: Likewise.
* elf32-crx.c: Likewise.
* elf32-frv.c: Likewise.
* elf32-hppa.c: Likewise.
* elf32-i860.c: Likewise.
* elf32-ip2k.c: Likewise.
* elf32-iq2000.c: Likewise.
* elf32-m32c.c: Likewise.
* elf32-m68hc1x.c: Likewise.
* elf32-msp430.c: Likewise.
* elf32-mt.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-rl78.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-score.h: Likewise.
* elf32-sh-symbian.c: Likewise.
* elf32-sh.c: Likewise.
* elf32-spu.c: Likewise.
* elf32-tic6x.c: Likewise.
* elf32-v850.c: Likewise.
* elf32-xc16x.c: Likewise.
* elf32-xtensa.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-hppa.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elfcore.h: Likewise.
* elflink.c: Likewise.
* elfxx-mips.c: Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-tilegx.c: Likewise.
* ieee.c: Likewise.
* libcoff.h: Likewise.
* libpei.h: Likewise.
* libxcoff.h: Likewise.
* linker.c: Likewise.
* mach-o-i386.c: Likewise.
* mach-o-target.c: Likewise.
* mach-o.c: Likewise.
* mach-o.h: Likewise.
* mmo.c: Likewise.
* opncls.c: Likewise.
* pdp11.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c: Likewise.
* pef-traceback.h: Likewise.
* pei-x86_64.c: Likewise.
* peicode.h: Likewise.
* plugin.c: Likewise.
* reloc.c: Likewise.
* riscix.c: Likewise.
* section.c: Likewise.
* som.c: Likewise.
* syms.c: Likewise.
* tekhex.c: Likewise.
* ticoff.h: Likewise.
* vaxbsd.c: Likewise.
* xcofflink.c: Likewise.
* xtensa-isa.c: Likewise.
|
|
* coff-x86_64.c (_bfd_generic_find_nearest_line_discriminator):
Define as coff_find_nearest_line_discriminator.
|
|
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
|
|
* coff-i386.c (coff_i386_rtype_to_howto <R_SECREL32>): Test
h->root.type not h->type.
* coff-x86_64.c (coff_amd64_rtype_to_howto <R_AMD64_SECREL>): Likewise.
|
|
Add match_priority.
* configure.in: Bump bfd version.
* elfcode.h (elf_object_p): Delete hacks preventing match of
EM_NONE and ELFOSABI_NONE targets when a better match exists.
* elfxx-target.h (elf_match_priority): Define and use.
* format.c (bfd_check_format_matches): Use target match_priority
to choose best of multiple matching targets. In cases with multiple
matches rerun _bfd_check_format if we don't choose the last match.
* aout-adobe.c, * aout-arm.c, * aout-target.h, * aout-tic30.c,
* binary.c, * bout.c, * coff-alpha.c, * coff-i386.c, * coff-i860.c,
* coff-i960.c, * coff-ia64.c, * coff-mips.c, * coff-or32.c,
* coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic30.c,
* coff-tic54x.c, * coff-x86_64.c, * coff64-rs6000.c, * coffcode.h,
* i386msdos.c, * i386os9k.c, * ieee.c, * ihex.c, * mach-o-target.c,
* mipsbsd.c, * mmo.c, * nlm-target.h, * oasys.c, * pdp11.c,
* pe-mips.c, * pef.c, * plugin.c, * ppcboot.c, * som.c, * srec.c,
* tekhex.c, * trad-core.c, * verilog.c, * versados.c, * vms-alpha.c,
* vms-lib.c, * xsym.c: Init match_priority field.
* configure: Regenerate.
* bfd-in2.h: Regenerate.
|
|
* coff-x86_64.c (coff_amd64_rtype_to_howto): Fencepost error.
|
|
* coff-i386.c (in_reloc_p): Check also for R_SECREL32.
* coff-x86_64.c (in_reloc_p): Check also for R_AMD64_SECREL.
|
|
Fix up all warnings generated by the addition of this switch.
|
|
* coff-x86_64.c (coff_amd64_rtype_to_howto): Subtract offset
of R_AMD64_PCRLONG_<X> relocations from addend.
|