aboutsummaryrefslogtreecommitdiff
path: root/bfd/bfd.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-29PR15350, Fix compressed debug sections for PE targetsAlan Modra1-43/+41
PR 15350 * bfd.c (bfd_update_compression_header): Write zlib header for formats other than ELF too.
2019-11-25Pass section when available to bfd_octets_per_byteAlan Modra1-1/+1
and other tidies. I think it's better to default to passing the section to bfd_octets_per_byte, even in cases where we know it won't make a difference. A number of the coff reloc functions used bfd_octets_per_byte wrongly, not factoring it into the offset into the data buffer. As it happens, the targets using those files always had bfd_octets_per_byte equal to one, so there wasn't any detectable wrong behaviour. However, it is wrong in the source and might cause trouble for anyone creating a new target. Besides fixing that, the patch also defines OCTETS_PER_BYTE as one in target files where that is appropriate. bfd/ * archures.c (bfd_octets_per_byte): Tail call bfd_arch_mach_octets_per_byte. * coff-arm.c (OCTETS_PER_BYTE): Define. (coff_arm_reloc): Introduce new "octets" temp. Use OCTETS_PER_BYTE with section. Correct "addr". Remove ATTRIBUTE_UNUSED. * coff-i386.c (coff_i386_reloc): Similarly. * coff-mips.c (mips_reflo_reloc): Similarly. * coff-x86_64.c (coff_amd64_reloc): Similarly. * elf32-msp430.c (OCTETS_PER_BYTE): Define. (rl78_sym_diff_handler): Use OCTETS_PER_BYTE, with section. * elf32-nds32.c (nds32_elf_get_relocated_section_contents): Similarly. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Similarly. * elf32-pru.c (pru_elf32_do_ldi32_relocate): Similarly. * elf32-s12z.c (opru18_reloc): Similarly. * elf32-sh.c (sh_elf_reloc): Similarly. * elf32-spu.c (spu_elf_rel9): Similarly. * elf32-xtensa.c (bfd_elf_xtensa_reloc): Similarly. * elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc), (ppc64_elf_toc64_reloc): Similarly. * bfd.c (bfd_get_section_limit): Pass section to bfd_octets_per_byte. * cofflink.c (_bfd_coff_link_input_bfd), (_bfd_coff_reloc_link_order): Likewise. * elf.c (_bfd_elf_section_offset): Likewise. * elflink.c (resolve_section, bfd_elf_perform_complex_relocation), (elf_link_input_bfd, elf_reloc_link_order, elf_fixup_link_order), (bfd_elf_final_link): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): Don't strncmp twice to set SEC_ELF_OCTETS. * reloc.c (bfd_perform_relocation): Tidy SEC_ELF_OCTETS special case. (bfd_install_relocation): Likewise. (_bfd_final_link_relocate): Don't recalculate octets. * syms.c (_bfd_stab_section_find_nearest_line): Introduc new "octets" temp. * bfd-in2.h: Regenerate. ld/ * ldexp.c (fold_name): Pass section to bfd_octets_per_byte. * ldlang.c (init_opb): Don't call bfd_arch_mach_octets_per_byte unnecessarily.
2019-11-25Introduce new section flag: SEC_ELF_OCTETSChristian Eggers1-1/+2
All symbols, sizes and relocations in this section are octets instead of bytes. Required for DWARF debug sections as DWARF information is organized in octets, not bytes. bfd/ * section.c (struct bfd_section): New flag SEC_ELF_OCTETS. * archures.c (bfd_octets_per_byte): New parameter sec. If section is not NULL and SEC_ELF_OCTETS is set, one octet es returned [ELF targets only]. * bfd.c (bfd_get_section_limit): Provide section parameter to bfd_octets_per_byte. * bfd-in2.h: regenerate. * binary.c (binary_set_section_contents): Move call to bfd_octets_per_byte into section loop. Provide section parameter to bfd_octets_per_byte. * coff-arm.c (coff_arm_reloc): Provide section parameter to bfd_octets_per_byte. * coff-i386.c (coff_i386_reloc): likewise. * coff-mips.c (mips_reflo_reloc): likewise. * coff-x86_64.c (coff_amd64_reloc): likewise. * cofflink.c (_bfd_coff_link_input_bfd): likewise. (_bfd_coff_reloc_link_order): likewise. * elf.c (_bfd_elf_section_offset): likewise. (_bfd_elf_make_section_from_shdr): likewise. Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes, .debug*, .zdebug* and .note.gnu*. * elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter to bfd_octets_per_byte. * elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise. * elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise. * elf32-s12z.c (opru18_reloc): likewise. * elf32-sh.c (sh_elf_reloc): likewise. * elf32-spu.c (spu_elf_rel9): likewise. * elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise * elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise. (ppc64_elf_addr16_ha_reloc): likewise. (ppc64_elf_toc64_reloc): likewise. * elflink.c (bfd_elf_final_link): likewise. (bfd_elf_perform_complex_relocation): likewise. (elf_fixup_link_order): likewise. (elf_link_input_bfd): likewise. (elf_link_sort_relocs): likewise. (elf_reloc_link_order): likewise. (resolve_section): likewise. * linker.c (_bfd_generic_reloc_link_order): likewise. (bfd_generic_define_common_symbol): likewise. (default_data_link_order): likewise. (default_indirect_link_order): likewise. * srec.c (srec_set_section_contents): likewise. (srec_write_section): likewise. * syms.c (_bfd_stab_section_find_nearest_line): likewise. * reloc.c (_bfd_final_link_relocate): likewise. (bfd_generic_get_relocated_section_contents): likewise. (bfd_install_relocation): likewise. For section which have SEC_ELF_OCTETS set, multiply output_base and output_offset with bfd_octets_per_byte. (bfd_perform_relocation): likewise. include/ * coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN), (PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls. binutils/ * objdump.c (disassemble_data): Provide section parameter to bfd_octets_per_byte. (dump_section): likewise (dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set. gas/ * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str and .debug_ranges sections. * write.c (maybe_generate_build_notes): Set section flag SEC_OCTETS for .gnu.build.attributes section. * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if SEC_OCTETS is set. * symbols.c (resolve_symbol_value): Likewise. ld/ * ldexp.c (fold_name): Provide section parameter to bfd_octets_per_byte. * ldlang (init_opb): New argument s. Set opb_shift to 0 if SEC_ELF_OCTETS for the current section is set. (print_input_section): Pass current section to init_opb. (print_data_statement,print_reloc_statement, print_padding_statement): Likewise. (lang_check_section_addresses): Call init_opb for each section. (lang_size_sections_1,lang_size_sections_1, lang_do_assignments_1): Likewise. (lang_process): Pass NULL to init_opb.
2019-11-18PR25196, abort in rewrite_elf_program_headerAlan Modra1-0/+2
This patch introduces a new "sorry, cannot handle this file" bfd error status. The idea is to use this error in cases where bfd hasn't found a bfd_bad_value error, ie. an input file or set of options that are invalid, but rather an input file that is simply too difficult to process. Typically this might happen with fuzzed object files such as the one in the PR, a wildly improbable core file. Some things are just not worth wasting time over to fix "properly". PR 25196 * bfd.c (bfd_error_type): Add bfd_error_sorry. (bfd_errmsgs): Likewise. * elf.c (rewrite_elf_program_header): Don't abort on confused lma/alignment. Replace bfd_error_bad_value with bfd_error_sorry. (_bfd_elf_validate_reloc): Use bfd_error_sorry. (_bfd_elf_final_write_processing): Likewise. * bfd-in2.h: Regenerate.
2019-10-21ar P supportAlan Modra1-1/+4
This patch extends "ar P" to allow creation of normal (as distinct from thin) archives with full path names. PR 452 PR 25104 bfd/ * archive.c (normalize): Return file unchanged when BFD_ARCHIVE_FULL_PATH. (_bfd_construct_extended_name_table): Pass abfd, the output bfd, to normalize. (_bfd_archive_bsd44_construct_extended_name_table): Likewise. * bfd.c (struct bfd): Make flags a full flagword. (BFD_ARCHIVE_FULL_PATH): Define. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Set BFD_ARCHIVE_FULL_PATH. * doc/binutils.texi (extract from archive): Mention restrictions when extracting from archives with full paths. (ar P): Update to current P support. (ar -X32_64): Fix spelling.
2019-10-15Simplify power of two testAlan Modra1-1/+1
* bfd.c (bfd_check_compression_header): Check for powers of two with x == (x & -x).
2019-09-20bfd macro conversion to inline functions, sectionAlan Modra1-0/+99
This one exposed a bug in tic6x gas, found with inline function parameter type checking. struct bfd_section and struct bfd_symbol both have a flags field, so bfd_is_com_section (symbol) compiled OK when bfd_is_com_section was a macro but didn't special case common symbols. bfd/ * bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment, bfd_section_flags), (bfd_section_userdata, bfd_is_com_section, discarded_section), (bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros. * bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit), (bfd_section_list_remove, bfd_section_list_append), (bfd_section_list_prepend, bfd_section_list_insert_after), (bfd_section_list_insert_before, bfd_section_removed_from_list): New inline functions. * section.c (bfd_is_und_section, bfd_is_abs_section), (bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove), (bfd_section_list_append, bfd_section_list_prepend), (bfd_section_list_insert_after, bfd_section_list_insert_before), (bfd_section_removed_from_list): Delete macros. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment, bfd_section_flags), (bfd_section_userdata, bfd_is_com_section, bfd_is_und_section), (bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section), (discarded_section): New inline functions. * bfd-in2.h: Regenerate. gas/ * config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check. ld/ * emultempl/xtensaelf.em (xtensa_get_section_deps): Comment. Use bfd_section_userdata. (xtensa_set_section_deps): Use bfd_set_section_userdata. * ldlang.c (lang_output_section_get): Use bfd_section_userdata. (sort_def_symbol): Likewise, and bfd_set_section_userdata. (init_os): Use bfd_set_section_userdata. (print_all_symbols): Use bfd_section_userdata. * ldlang.h (get_userdata): Delete.
2019-09-20bfd macro conversion to inline functions, asymbolAlan Modra1-0/+30
* bfd-in.h (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_asymbol_flavour, bfd_set_asymbol_name): Delete. * bfd.c (bfd_asymbol_section, bfd_asymbol_value, bfd_asymbol_name), (bfd_asymbol_bfd, bfd_set_asymbol_name): New inline functions. * targets.c (bfd_asymbol_flavour): Likewise. * bfd-in2.h: Regenerate.
2019-09-20bfd macro conversion to inline functionsAlan Modra1-0/+84
This converts some of the macros that access struct bfd fields to inline functions. bfd/ * archive.c (bfd_generic_archive_p): Use bfd_set_thin_archive. * bfd-in.h (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_target, bfd_get_flavour, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian, bfd_header_little_endian), (bfd_get_file_flags, bfd_applicable_file_flags), (bfd_applicable_section_flags, bfd_has_map, bfd_is_thin_archive), (bfd_valid_reloc_types, bfd_usrdata, bfd_get_start_address), (bfd_get_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_get_dynamic_symcount, bfd_get_symbol_leading_char): Delete. * bfd/bfd.c (bfd_get_filename, bfd_get_cacheable, bfd_get_format), (bfd_get_file_flags, bfd_get_start_address, bfd_get_symcount), (bfd_get_dynamic_symcount, bfd_get_outsymbols, bfd_count_sections), (bfd_has_map, bfd_is_thin_archive, bfd_set_thin_archive), (bfd_usrdata, bfd_set_usrdata): New inline functions. * targets.c (bfd_get_target, bfd_get_flavour), (bfd_applicable_file_flags, bfd_family_coff, bfd_big_endian), (bfd_little_endian, bfd_header_big_endian), (bfd_header_little_endian, bfd_applicable_section_flags), (bfd_get_symbol_leading_char): New inline functions. * bfd-in2.h: Regenerate. binutils/ * ar.c (write_archive): Use bfd_set_thin_archive. gdb/ * gdb_bfd.c (gdb_bfd_ref, gdb_bfd_unref): Use bfd_set_usrdata. * dwarf2read.c (dwarf2_read_gdb_index, dwarf2_read_debug_names), (read_indirect_string_from_dwz): Use bfd accessor. * dwarf2read.h (struct dwz_file <filename>): Likewise. * machoread.c (macho_symfile_read_all_oso): Likewise. * solib.c (solib_bfd_open): Likewise. ld/ * ldelf.c (ldelf_after_open, ldelf_place_orphan * ldlang.c (walk_wild_file, lang_process): Use bfd_usrdata. (load_symbols, ldlang_add_file): Use bfd_set_usrdata. * ldmain.c (add_archive_element): Use bfd_usrdata. * ldlang.h (bfd_input_just_syms): New inline function. * emultempl/aarch64elf.em (build_section_lists): Use it. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise. * emultempl/ppc64elf.em (build_section_lists): Likewise. sim/ * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
2019-09-19bfd_section_* macrosAlan Modra1-4/+4
This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.
2019-09-18Don't use bfd_get_* macro to set bfd fieldsAlan Modra1-1/+1
* aoutx.h (slurp_symbol_table): Don't set symcount using bfd_get macros. * pdp11.c (slurp_symbol_table): Likewise. * som.c (som_slurp_symbol_table): Likewise. * coff-ppc.c (ppc_bfd_coff_final_link): Likewise. * coffcode.h (coff_slurp_symbol_table): Likewise. * cofflink.c (_bfd_coff_final_link): Likewise. * ecoff.c (ecoff_slurp_symbolic_header): Likewise. (_bfd_ecoff_slurp_symbolic_info): Likewise. (_bfd_ecoff_slurp_symbol_table): Likewise. (_bfd_ecoff_bfd_final_link): Likewise. * elf.c (_bfd_elf_canonicalize_symtab): Likewise. * elflink.c (elf_link_output_symstrtab): Likewise. (bfd_elf_final_link): Likewise. * peicode.h (pe_ILF_build_a_bfd): Likewise. * xcofflink.c (_bfd_xcoff_bfd_final_link): Likewise. * aoutx.h (some_aout_object_p, slurp_symbol_table): Don't set start_address or symcount using bfd_get macros. * coffgen.c (coff_real_object_p): Likewise. * pdp11.c (some_aout_object_p, slurp_symbol_table): Likewise. * som.c (som_object_setup, som_slurp_symbol_table): Likewise. * elfcore.h (elf_core_file_p): Don't set start_address using bfd_get macro. * elf.c (_bfd_elf_canonicalize_dynamic_symtab): Don't set dynsymcount using bfd_get macro. * bfd.c (bfd_set_file_flags): Don't set flags using bfd_get macro. * linker.c (bfd_generic_link_read_symbols): Don't set outsymbols or symcount using bfd_get macros. (_bfd_generic_final_link, generic_add_output_symbol): Likewise. * syms.c (bfd_set_symtab): Likewise. * vms-alpha.c (alpha_vms_bfd_final_link): Likewise. * archive.c (do_slurp_bsd_armap): Don't set has_armap using bfd_has_map macro. (do_slurp_coff_armap, bfd_slurp_armap): Likewise. * archive64.c (_bfd_archive_64_bit_slurp_armap): Likewise. * coff-rs6000.c (_bfd_xcoff_slurp_armap): Likewise. * coff64-rs6000.c (xcoff64_slurp_armap): Likewise. * ecoff.c (_bfd_ecoff_slurp_armap): Likewise. * som.c (som_slurp_armap): Likewise.
2019-09-18Constify target name, reloc name, and carsym nameAlan Modra1-1/+1
bfd/ * bfd-in.h (carsym.name): Make const. * reloc.c (struct reloc_howto_struct.name): Likewise. * targets.c (bfd_target.name): Likewise.! * bfd.c (bfd_get_sign_extend_vma): Make variable const. * som.c (som_bfd_fill_in_ar_symbols): Use an intermediary variable when setting carsym.name. * bfd-in2.h: Regenerate. gdb/ * amd64-dicos-tdep.c (amd64_dicos_osabi_sniffer): Constify target. * i386-cygwin-tdep.c (i386_cygwin_init_abi): Likewise. * i386-dicos-tdep.c (i386_dicos_osabi_sniffer): Likewise. ld/ * ldlang.c (stricpy, strcut, name_compare): Constify params. (get_first_input_target): Make return and "target" const.
2019-09-11Tidy ld/ldmisc.cAlan Modra1-0/+3
The idea here is to not use elf-bfd.h and coff-bfd.h in generic linker code. bfd/ * targets.c (struct bfd_target): Add _bfd_group_name. (BFD_JUMP_TABLE): Likewise. * coffgen.c (bfd_coff_group_name): New function. * elf.c (bfd_elf_group_name): New function. * linker.c (_bfd_nolink_bfd_group_name): New function. * section.c (bfd_generic_group_name): New function. * elf-bfd.h (bfd_elf_group_name): Declare. * libbfd-in.h (_bfd_nolink_bfd_group_name): Declare. * libcoff-in.h (bfd_coff_group_name): Declare. * aout-target.h (MY_bfd_group_name): Define. * aout-tic30.c (MY_bfd_group_name): Define. * bfd.c (bfd_group_name): Define. * binary.c (binary_bfd_group_name): Define. * coff-alpha.c (_bfd_ecoff_bfd_group_name): Define. * coff-mips.c (_bfd_ecoff_bfd_group_name): Define. * coff-rs6000.c (_bfd_xcoff_bfd_group_name): Define. * coffcode.h (coff_bfd_group_name): Define. * elfxx-target.h (bfd_elfNN_bfd_group_name): Define. * i386msdos.c (msdos_bfd_group_name): Define. * ihex.c (ihex_bfd_group_name): Define. * mach-o-target.c (bfd_mach_o_bfd_group_name): Define. * mmo.c (mmo_bfd_group_name): Define. * pef.c (bfd_pef_bfd_group_name): Define. * plugin.c (bfd_plugin_bfd_group_name): Define. * ppcboot.c (ppcboot_bfd_group_name): Define. * som.c (som_bfd_group_name): Define. * srec.c (srec_bfd_group_name): Define. * tekhex.c (tekhex_bfd_group_name): Define. * verilog.c (verilog_bfd_group_name): Define. * vms-alpha.c (vms_bfd_group_name, alpha_vms_bfd_group_name): Define. * xsym.c (bfd_sym_bfd_group_name): Define. * coff64-rs6000.c (rs6000_xcoff64_vec): Init new field. (rs6000_xcoff64_aix_vec): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate. ld/ * ldmisc.c: Don't #include elf-bfd.h or coff-bfd.h. (vfinfo): Use bfd_group_name.
2019-08-29PR24891, objdump memory leaks when parsing malformed archiveAlan Modra1-0/+3
BFD was leaking memory in bfd_check_format_matches. As part of deciding the proper format of an archive, BFD looks at the format of the first file stored. That file's bfd was left open for reasons given in a comment removed in git commit 0e71e4955cd1 that said: /* We ought to close `first' here, but we can't, because we have no way to remove it from the archive cache. It's close to impossible to figure out when we can release bfd_ardata. FIXME. */ Well, things have changed since that comment was true and we now can remove files from the archive cache. Closing the first file is good and cures some of the leaks. Other leaks are caused by bfd_check_format_matches throwing away bfd tdata before trying a new match. That lost the element cache set up when format checking the first element in the archive. The easiest and cleanest fix is to simply disable the caching when checking the first element. PR 24891 * bfd.c (struct bfd): Add no_element_cache. * archive.c (_bfd_get_elt_at_filepos): Don't add element to archive cache when no_element_cache. (bfd_generic_archive_p): Set no_element_cache when opening first element to check format. Close first element too. (do_slurp_bsd_armap): Don't zero ardata->cache here. * bfd-in2.h: Regenerate.
2019-07-30Re: Support .gnu.lto_.lto section in ELF filesAlan Modra1-0/+3
PR 24768 * bfd.c (struct bfd): Add lto_slim_object flag. * bfd-in2.h: Regenerate.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-11-27Handle ELF compressed header alignment correctly by setting up the section ↵Mark Wielaard1-5/+15
alignment correctly for the Elf32_Chdr or Elf64_Chdr type and respect the ch_addralign field when decompressing the section data. PR binutils/23919 binutils* readelf.c (dump_sections_as_strings): Remove bogus addralign check. (dump_sections_as_bytes): Likewise. (load_specific_debug_sections): Likewise. * testsuite/binutils-all/dw2-3.rS: Adjust alignment. * testsuite/binutils-all/dw2-3.rt: Likewise. bfd * bfd.c (bfd_update_compression_header): Explicitly set alignment. (bfd_check_compression_header): Add uncompressed_alignment_power argument. Check ch_addralign is a power of 2. * bfd-in2.h: Regenerated. * compress.c (bfd_compress_section_contents): Get and set orig_uncompressed_alignment_pow if section is decompressed. (bfd_is_section_compressed_with_header): Add and get uncompressed_align_pow_p argument. (bfd_is_section_compressed): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call. (bfd_init_section_decompress_status): Get and set uncompressed_alignment_power. * elf.c (_bfd_elf_make_section_from_shdr): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call.
2018-08-08Convert .note.gnu.property section between ELF32 and ELF64H.J. Lu1-8/+17
.note.gnu.property section has different alignments and section sizes for 32-bit and 64-bit ELF binaries. This patch updated bfd_convert_section_size and bfd_convert_section_contents to properly convert .note.gnu.property section between 32-bit and 64-bit ELF binaries. bfd/ PR binutils/23494 * bfd.c (bfd_convert_section_size): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_property_size to convert .note.gnu.property section size. (bfd_convert_section_contents): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_properties to convert .note.gnu.property section. * elf-bfd.h (_bfd_elf_convert_gnu_property_size): New prototype. (_bfd_elf_convert_gnu_properties): Likewise. * elf-properties.c (elf_get_gnu_property_section_size): New function. (elf_write_gnu_properties): Likewise. (_bfd_elf_convert_gnu_property_size): Likewise. (_bfd_elf_convert_gnu_properties): Likewise. (_bfd_elf_link_setup_gnu_properties): Use elf_get_gnu_property_section_size and elf_write_gnu_properties. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494a-x32.d: New file. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-06-05Tidy bfdio to consistenly use containing archiveAlan Modra1-2/+3
Archive element IO is performed on the file of the containing archive, which leads to the BFD "where" field of archives and their elements being out of sync with the real file position. (We're talking traditional archives here, not thin archives.) The old bfd_seek code recognized this by not attempting to optimize away seeks for archives. However, there was other code that could return bogus results. For example, cache.c limits the number of open files by closing a file and remembering its state once the limit is reached. If bfd_tell is called on an archive element when the containing archive is closed, it will return an invalid file pointer. It's possible to have a valid "where" field for archives by always using and updating the containing archive BFD. That's what this patch does. Note that cache.c used to find the containing archive BFD anyway for the iostream, so we're not really doing extra work, just transferring it up to the correct abstraction level. The patch also gets rid of some hacks. bfd_tell was called when bfd_seek failed, in an attempt to correct "where". That's got to be papering over another problem, so that code has been removed. bfd_read also had an "optimiziation" to return early when the number of bytes was zero, and bfd_seek optimized calls that didn't move the file pointer. This was covering for a coff_slurp_line_table bug where IO was attempted on a pe-dll BFD without an iovec. * bfd.c (struct bfd): Update comment on "where" usage. * bfdio.c (bfd_bwrite, bfd_stat): Use and update "iovec", "iostream", and "where" from containing archive file. Return error on NULL iovec. (bfd_bread): Similarly, and return error attempted out of bounds archive element access. (bfd_tell, bfd_flush): Use and update "iovec", "iostream", and "where" from containing archive file. (bfd_seek): Likewise. Return error on NULL iovec. Don't attempt to optimize away seeks. Don't paper over errors by calling bfd_tell. (bfd_get_mtime): Call bfd_stat rather than iovec->bstat. (bfd_get_size): Likewise. (bfd_mmap): Operate on and use iovec of containing archive file. Return error on NULL iovec. * cache.c (bfd_cache_lookup_worker): Abort if working on archive element bfd. (cache_bread_1): Delete bfd parameter, add FILE* parameter. Don't ignore zero byte reads. (cache_bread): Look up FILE* in cache here. Error on NULL lookup. (cache_bwrite): Rename "where" to "from". (cache_bmmap): Don't handle archive elements. * coffcode.h (coff_slurp_line_table): Exit early on zero lineno count. * bfd-in2.h: Regenerate.
2018-06-01Make _bfd_error_handler available outside libbfdAlan Modra1-8/+20
Needed when building libopcodes.so. bfd/ * bfd.c (_bfd_error_handler): Arrange for this function to be declared in bfd-in2.h. * libbfd-in.h (_bfd_error_handler): Don't declare. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. opcodes/ * sysdep.h (_bfd_error_handler): Don't declare. * msp430-decode.opc: Include bfd.h. Don't include ansidecl.h here. * rl78-decode.opc: Likewise. * msp430-decode.c: Regenerate. * rl78-decode.c: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra1-2/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove IEEE 695 object supportAlan Modra1-2/+0
include/ * ieee.h: Delete. bfd/ * Makefile.am: Remove IEEE 695 support. * archures.c: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * doc/bfdsumm.texi: Likewise. * section.c: Likewise. * targets.c: Likewise. * ieee.c: Delete. * libieee.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * Makefile.am: Remove IEEE 695 support. * budbg.h: Likewise. * doc/binutils.texi: Likewise. * makefile.vms: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * rddbg.c: Likewise. * ieee.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * app.c: Remove IEEE 695 support. * symbols.c: Likewise. ld/ * ld.texinfo: Remove IEEE 695 support. * mri.c: Likewise.
2018-04-16Remove netware supportAlan Modra1-1/+0
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-14powerpc common-page-sizeAlan Modra1-3/+10
max-page-size only matters for demand paged executables or shared libraries, and the ideal size is the largest value used by your operating system. Values larger than necessary just waste file space and memory. common-page-size also affects file and memory size, trading a possible small increase in file size for a decrease in memory size when the operating system is using a common-page-size page. With a powerpc max-page-size of 64k and common-page-size of 4k many executables will use no more memory pages when the system page size is 4k than an executable linked with -z max-page-size=0x1000, yet will still run on a system using 64k pages. However, when running on a system using 64k pages relro protection will not be completely effective. Due to the relro problem, powerpc binutils has been using a default common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7), leading to complaints about increased file and memory sizes. People not using relro do have a valid reason to complain.. So this patch introduces an extra back-end value to use as the default for common-page-size when generating relro executables, and enables the support for powerpc. Non relro executables will now be generated with a default common-page-size of 4k. bfd/ * elf-bfd.h (struct elf_backend_data): Add relropagesize. * elfxx-target.h (ELF_RELROPAGESIZE): Provide default and sanity test. (elfNN_bed): Init relropagesize. * bfd.c (bfd_emul_get_commonpagesize): Add boolean param to select relropagesize. * elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. (ELF_MINPAGESIZE): Don't define. * elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. * bfd-in2.h: Regenerate. ld/ * ldmain.c (main): Move config.maxpagesize and config.commonpagesize initialization to.. * ldemul.c (after_parse_default): ..here. * testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size. * testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-1/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-02-26BFD messagesAlan Modra1-21/+21
bfd/ * archive.c, * bfd.c, * linker.c, * reloc.c, * stabs.c, * syms.c: Standardize error/warning messages. binutils/ * testsuite/binutils-all/mips/mips-reginfo-n32.d, * testsuite/binutils-all/mips/mips-reginfo.d: Update. gas/ * testsuite/gas/mips/reginfo-2.l: Update. ld/ * testsuite/ld-arm/cmse-implib-errors.out, * testsuite/ld-arm/cmse-new-earlier-later-implib.out, * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out, * testsuite/ld-arm/cmse-new-wrong-implib.out, * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out, * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out, * testsuite/ld-cris/badgotr1.d, * testsuite/ld-cris/tls-err-24.d, * testsuite/ld-cris/tls-err-25.d, * testsuite/ld-cris/tls-err-26.d, * testsuite/ld-cris/tls-err-27.d, * testsuite/ld-cris/tls-err-28.d, * testsuite/ld-cris/tls-err-40.d, * testsuite/ld-cris/tls-err-44.d, * testsuite/ld-cris/tls-err-48.d, * testsuite/ld-cris/tls-err-52.d, * testsuite/ld-cris/tls-err-53.d, * testsuite/ld-cris/tls-err-55.d, * testsuite/ld-cris/tls-err-56.d, * testsuite/ld-cris/tls-err-62.d, * testsuite/ld-cris/tls-err-65.d, * testsuite/ld-cris/tls-err-77.d, * testsuite/ld-elf/empty-implib.out, * testsuite/ld-elf/indirect.exp: Update.
2018-02-19%L conversionsAlan Modra1-25/+1
* bfd-in.h: Include inttypes.h or if not available define PRId64, PRIu64 and PRIx64. * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Remove support for L modifier to print bfd_vma. * coff-arm.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic80.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * dwarf2.c, * elf-m10300.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-bfin.c, * elf32-cris.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32r.c, * elf32-m68k.c, * elf32-metag.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-ppc.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-s390.c, * elf64-sh64.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * ieee.c, * ihex.c, * mach-o.c, * merge.c, * mmo.c, * peXXigen.c, * xcofflink.c: Replace use of Lx modifier with PRIx64, and cast input to uint64_t, and similarly for Ld and Lu. * bfd-in2.h: Regenerate.
2018-02-19Use %pA and %pB in messages rather than %A and %BAlan Modra1-52/+56
First step towards compiler verification of _bfd_error_handler arguments, and better verification of translated messages. bfd/ * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Handle %pA and %pB in place of %A and %B. * aout-adobe.c: Update all messages using %A and %B. * aout-cris.c: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * compress.c: Likewise. * cpu-arm.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-properties.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-sparc.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-wasm32.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfnn-riscv.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.c: Likewise. * hpux-core.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * peicode.h: Likewise. * reloc.c: Likewise. * rs6000-core.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * xcofflink.c: Likewise. ld/ * ldmisc.c (vfinfo): Handle %pA and %pB in place of %A and %B. * ldcref.c: Update all messages using %A and %B. * ldexp.c: Likewise. * ldlang.c: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * emultempl/beos.em: Likewise. * emultempl/cr16elf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/m68kcoff.em: Likewise. * emultempl/m68kelf.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/nds32elf.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/sunos.em: Likewise. * emultempl/xtensaelf.em: Likewise.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-11Typo fixSangamesh Mallayya1-1/+1
Entirely the fault of that Alan Modra bloke. * bfd.c (bfd_get_sign_extend_vma): Correct typo.
2017-12-08Add aix 64-bit check to bfd_get_sign_extend_vmaSangamesh Mallayya1-1/+2
* bfd.c (bfd_get_sign_extend_vma): Handle aix5coff64-rs6000.
2017-12-06BFD whitespace fixesAlan Modra1-56/+56
Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
2017-11-15Handle ' and I format flagsAlan Modra1-14/+22
Also a little tidying and error checking. * bfd.c (union _bfd_doprnt_args): Add "Bad". (_bfd_doprnt): Handle more flags. (_bfd_doprnt_scan): Likewise. Tidy setting of args array. (error_handler_internal): Init args type to Bad.
2017-11-05Proper bound check in _bfd_doprnt_scanAlan Modra1-6/+6
While an abort after storing out of bounds by one to an array in our caller is probably OK in practice, it's better to check before storing. PR 22397 * bfd.c (_bfd_doprnt_scan): Check args index before storing, not after.
2017-11-05PR22397, BFD internal error when message locale isn't CAlan Modra1-31/+305
This adds positional parameter support to the bfd error handler, something that was lost 2017-04-13 when _doprnt was added with commit c08bb8dd. The number of format args is now limited to 9, which is sufficient for current _bfd_error_handler messages. If someone exceeds 9 args they get the joy of modifying this code to support more args (shouldn't be too difficult). PR 22397 * bfd.c (union _bfd_doprnt_args): New. (PRINT_TYPE): Add FIELD arg. Take value from args. (_bfd_doprnt): Replace ap parameter with args. Adjust all PRINT_TYPE invocations and reading of format args to suit. Move "%%" handling out of switch handling args. Support positional parameters. (_bfd_doprnt_scan): New function. (error_handler_internal): Call _bfd_doprnt_scan and read args.
2017-10-11Rename _doprnt -> _bfd_doprnt to fix DJGPP bfd build (and likely others)Pedro Alves1-6/+7
Building bfd/ for DJGPP, I see: ../../src/bfd/bfd.c:642:1: error: conflicting types for '_doprnt' _doprnt (FILE *stream, const char *format, va_list ap) ^~~~~~~ In file included from ../../src/bfd/sysdep.h:37:0, from ../../src/bfd/bfd.c:367: /usr/lib64/gcc/i586-pc-msdosdjgpp/6.1.0/include-fixed/stdio.h:171:5: note: previous declaration of '_doprnt' was here int _doprnt(const char *_fmt, va_list _args, FILE *_f); ^~~~~~~ Possible fixes the build on other systems too -- _doprnt was/is an exported symbol on old Unix/BSD systems too. bfd/ChangeLog: 2017-10-11 Pedro Alves <palves@redhat.com> * bfd.c (_doprnt): Rename to ... (_bfd_doprnt): ... this. (error_handler_internal): Adjust.
2017-10-05bfd_set_input_errorPedro Alves1-18/+33
A downside to the 2017-10-04 PR22245 fix is that bfd_set_error can now silently accept invalid errors if/when someone passes the a value of the wrong enumeration type, which previously would be caught by the -Wenum-conversion warning. PR 22245 * bfd.c (bfd_set_error): Revert 2017-10-04 change. Remove ellipsis parameter. Split out bfd_error_on_input code to.. (bfd_set_input_error): .. New function. * archive.c (_bfd_write_archive_contents): Use bfd_set_input_error. * vms-lib.c (_bfd_vms_lib_write_archive_contents): Likewise. * bfd-in2.h: Regenerate.
2017-10-04PR22245, Fix potential UB in bfd_set_errorPavel I. Kryukov1-2/+2
Passing enum as a first argument to variadic argument function may lead to undefined behavior. The explanation on CERT site: https://www.securecoding.cert.org/confluence/display/cplusplus/ EXP58-CPP.+Pass+an+object+of+the+correct+type+to+va_start The bug was found by Kirill Nedostoev (nedostoev.ka@phystech.edu) when he tried to build GNU binutils with Clang 7. PR 22245 * bfd.c (bfd_set_error): Avoid UB on passing arg to va_start that undergoes default promotion. * bfd-in2.h: Regenerate.
2017-07-07Another _doprnt fix for %L handlingAlan Modra1-12/+15
* bfd.c (_doprnt): Replace "L" with "ll" when printing bfd_vma as long long. Move code replacing "ll" with "I64", and simplify.
2017-07-06Convert 'L' to 'l' when setting wide_width to 1H.J. Lu1-1/+4
When setting wide_width to 1, convert 'L' to 'l'. Otherwise, %Lx/%Lu/%Ld will be passed to fprintf which will treat the argument as long long. * bfd.c (_doprnt): Convert 'L' to 'l' when setting wide_width to 1.
2017-07-03Support %Lx, %Lu, %Ld in _bfd_error_handler formatAlan Modra1-3/+21
One way to print 64-bit bfd_vma or bfd_size_type values on 32-bit hosts is to cast the value to long long and use the 'll' modifier in printf format strings. However, that's awkward because we also support the Microsoft C library printf that uses 'I64' as a modifier instead, and having variants of translated strings would not endear us to the translation project. So, rewrite the 'll' modifier in _doprint for Microsoft. Even with that capability it's not so nice for 32-bit code to need casts to long long, so this patch makes 'L' a modifier for bfd_vma rather than an alias for 'll'. I've then used the new 'L' modifier to fix selected format strings. * bfd.c (_doprnt): Rewrite "ll" and "L" modifiers to "I64" for __MSVCRT__. Support "L" modifier for bfd_vma. Formatting. * elf.c (setup_group): Use "Lx" to print sh_size. (_bfd_elf_setup_sections): Remove unnecessary cast and print unknown section type in hex. (copy_special_section_fields): Style fix. (bfd_section_from_shdr): Correct format for sh_link. Use a common error message for all the variants of unrecognized section types. (assign_file_positions_for_load_sections): Use "Lx" for lma adjust error message. (assign_file_positions_for_non_load_sections): Formatting. (rewrite_elf_program_header): Formatting. Use "Lx" for bfd_vma values in error messages. * elfcode.h (elf_slurp_reloc_table_from_section): Cast ELF_R_SYM value to type expected by format. * elflink.c (elf_link_read_relocs_from_section): Use "Lx" in error messages. (elf_link_add_object_symbols): Use "Lu" for symbol sizes. (elf_link_input_bfd): Use "Lx" for r_info. (bfd_elf_gc_record_vtinherit): Use "Lx" for offset.
2017-07-03BFD long long cleanupAlan Modra1-1/+1
long long isn't supposed to be used without a configure test, to support ancient compilers. Probably not terribly important nowadays. * bfd.c (bfd_scan_vma): Don't use long long unless HAVE_LONG_LONG. * coff-rs6000.c (FMT20): Handle hosts with 64-bit long and Microsoft C library variant of long long format specifier. (PRINT20): Cast value to bfd_uint64_t not long long. * coffcode.h (coff_print_aux): Use BFD_VMA_FMT. * coff-x86_64.c (coff_amd64_reloc): Use bfd_uint64_t rather than long long. Don't cast to bfd_vma. * elf32-score.c (score3_bfd_getl48): Likewise. * vms-alpha.c (_bfd_vms_slurp_eisd): Likewise.
2017-05-10bfd: new BFD target entry point _bfd_set_reloc.Jose E. Marchesi1-10/+2
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all BFD targets has been adapted to use it. This patch doesn't introduce any change on functionality, but prepares the ground for further work. bfd/ChangeLog: 2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com> * targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc. (struct bfd_target): New field _bfd_set_reloc. * bfd.c (bfd_set_reloc): Call backend _set_bfd. * reloc.c (_bfd_generic_set_reloc): New function. * coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc. * nlm-target.h (nlm_set_reloc): Likewise. * coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise. * aout-tic30.c (MY_set_reloc): Likewise. * aout-target.h (MY_set_reloc): Likewise. * elfxx-target.h (bfd_elfNN_set_reloc): Likewise. * coff-alpha.c (_bfd_ecoff_set_reloc): Likewise. * mach-o-target.c (bfd_mach_o_set_reloc): Likewise. * vms-alpha.c (alpha_vms_set_reloc): Likewise. * aout-adobe.c (aout_32_set_reloc): Likewise. * bout.c (b_out_set_reloc): Likewise. * coff-mips.c (_bfd_ecoff_set_reloc): Likewise. * i386os9k.c (aout_32_set_reloc): Likewise. * ieee.c (ieee_set_reloc): Likewise. * oasys.c (oasys_set_reloc): Likewise. * som.c (som_set_reloc): Likewise. * versados.c (versados_set_reloc): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_set_reloc. (rs6000_xcoff64_aix_vec): LIkewise. * libbfd.c (_bfd_norelocs_set_reloc): New function. * libbfd-in.h: Prototype for _bfd_norelocs_set_reloc. * i386msdos.c (msdos_set_reloc): Define to _bfd_norelocs_set_reloc. * elfcode.h (elf_set_reloc): Define. * bfd-in2.h: Regenerated.
2017-04-13Rewrite bfd error handlerAlan Modra1-148/+212
This steals _doprnt from libiberty, extended to handle %A and %B. Which lets us do away with the current horrible %A and %B handling that requires all %A and %B arguments to be passed first, rather than in the natural order. * bfd.c (PRINT_TYPE): Define. (_doprnt): New function. (error_handler_internal): Use _doprnt. * coff-arm.c: Put %A and %B arguments to _bfd_error_handler calls in their natural order, throughout file. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-tic80.c: Likewise. * cofflink.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arm.c: Likewise. * elf32-i386.c: Likewise. * elf32-m32r.c: Likewise. * elf32-msp430.c: Likewise. * elf32-spu.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-mips.c: Likewise.
2017-02-16[Patch] Add BFD_LINKER_CREATED to BFD_FLAGS_SAVEDJiong Wang1-2/+3
bfd/ * bfd.c (BFD_FLAGS_SAVED): Add BFD_LINKER_CREATED. * bfd-in2.h: Regenerated. Bug exposed by https://sourceware.org/ml/binutils/2017-02/msg00128.html
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-10-19Add c-format tags to translatable strings with more than one argument-using ↵Nick Clifton1-0/+3
formatting token. * aout-adobe.c: Add missing c-format tags for translatable strings. * aout-cris.c: Likewise. * aoutx.h: Likewise. * bfd.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * cpu-arm.c: Likewise. * dwarf2.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * m68klinux.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * pei-x86_64.c: Likewise. * peicode.h: Likewise. * ppcboot.c: Likewise. * reloc.c: Likewise. * sparclinux.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * xcofflink.c: Likewise.
2016-10-07bfd_merge_private_bfd_data tidyAlan Modra1-21/+0
bfd_merge_private_bfd_data and _bfd_generic_verify_endian_match are linker functions, so move them to linker.c. bfd/ * Makefile.am (LIBBFD_H_FILES): Update. * doc/Makefile.am (LIBBFD_H_DEP): Likewise. * cpu-sh.c (sh_merge_bfd_arch): Move to.. * elf32-sh.c: ..here, and make static. * elf32-arc.c (arc_elf_merge_private_bfd_data): Delete extraneous error. * elf32-cris.c (cris_elf_merge_private_bfd_data): Don't call _bfd_generic_verify_endian_match. * elf32-microblaze.c (microblaze_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Define as _bfd_generic_verify_endian_match. * elf32-mt.c (mt_elf_merge_private_bfd_data): Don't test boolean == FALSE. * elf32-xgate.c (_bfd_xgate_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Don't define. * elf32-xgate.h (_bfd_xgate_elf_merge_private_bfd_data): Delete. * libbfd-in.h (_bfd_generic_verify_endian_match): Delete. * libbfd.c (_bfd_generic_verify_endian_match): Move to.. * linker.c: ..here, and make internal. * bfd.c (bfd_merge_private_bfd_data): Move to.. * linker.c: ..here. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. opcodes/ * sh-opc.h (sh_merge_bfd_arch): Delete prototype.
2016-09-30Remove syntactic sugarAlan Modra1-4/+4
Now that _bfd_error_handler is not a function pointer. * aout-adobe.c: Replace (*_bfd_error_handler) (...) with _bfd_error_handler (...) throughout. * aout-cris.c, * aoutx.h, * archive.c, * bfd.c, * binary.c, * cache.c, * coff-alpha.c, * coff-arm.c, * coff-h8300.c, * coff-i860.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * cpu-arm.c, * cpu-m68k.c, * cpu-sh.c, * dwarf2.c, * ecoff.c, * elf-eh-frame.c, * elf-m10300.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cris.c, * elf32-crx.c, * elf32-dlx.c, * elf32-frv.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * hpux-core.c, * i386linux.c, * ieee.c, * ihex.c, * libbfd.c, * linker.c, * m68klinux.c, * mach-o.c, * merge.c, * mmo.c, * oasys.c, * osf-core.c, * pdp11.c, * pe-mips.c, * peXXigen.c, * pef.c, * plugin.c, * reloc.c, * rs6000-core.c, * sco5-core.c, * som.c, * sparclinux.c, * srec.c, * stabs.c, * syms.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * xcofflink.c: Likewise.
generated by cgit v1.1 at 2024-11-22 05:28:35 +0000