aboutsummaryrefslogtreecommitdiff
path: root/bfd/bfd.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-27Handle ELF compressed header alignment correctly by setting up the section ↵Mark Wielaard1-5/+15
alignment correctly for the Elf32_Chdr or Elf64_Chdr type and respect the ch_addralign field when decompressing the section data. PR binutils/23919 binutils* readelf.c (dump_sections_as_strings): Remove bogus addralign check. (dump_sections_as_bytes): Likewise. (load_specific_debug_sections): Likewise. * testsuite/binutils-all/dw2-3.rS: Adjust alignment. * testsuite/binutils-all/dw2-3.rt: Likewise. bfd * bfd.c (bfd_update_compression_header): Explicitly set alignment. (bfd_check_compression_header): Add uncompressed_alignment_power argument. Check ch_addralign is a power of 2. * bfd-in2.h: Regenerated. * compress.c (bfd_compress_section_contents): Get and set orig_uncompressed_alignment_pow if section is decompressed. (bfd_is_section_compressed_with_header): Add and get uncompressed_align_pow_p argument. (bfd_is_section_compressed): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call. (bfd_init_section_decompress_status): Get and set uncompressed_alignment_power. * elf.c (_bfd_elf_make_section_from_shdr): Add uncompressed_align_power argument to bfd_is_section_compressed_with_header call.
2018-08-08Convert .note.gnu.property section between ELF32 and ELF64H.J. Lu1-8/+17
.note.gnu.property section has different alignments and section sizes for 32-bit and 64-bit ELF binaries. This patch updated bfd_convert_section_size and bfd_convert_section_contents to properly convert .note.gnu.property section between 32-bit and 64-bit ELF binaries. bfd/ PR binutils/23494 * bfd.c (bfd_convert_section_size): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_property_size to convert .note.gnu.property section size. (bfd_convert_section_contents): Check BFD_DECOMPRESS after calling _bfd_elf_convert_gnu_properties to convert .note.gnu.property section. * elf-bfd.h (_bfd_elf_convert_gnu_property_size): New prototype. (_bfd_elf_convert_gnu_properties): Likewise. * elf-properties.c (elf_get_gnu_property_section_size): New function. (elf_write_gnu_properties): Likewise. (_bfd_elf_convert_gnu_property_size): Likewise. (_bfd_elf_convert_gnu_properties): Likewise. (_bfd_elf_link_setup_gnu_properties): Use elf_get_gnu_property_section_size and elf_write_gnu_properties. binutils/ PR binutils/23494 * testsuite/binutils-all/x86-64/pr23494a-x32.d: New file. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
2018-06-05Tidy bfdio to consistenly use containing archiveAlan Modra1-2/+3
Archive element IO is performed on the file of the containing archive, which leads to the BFD "where" field of archives and their elements being out of sync with the real file position. (We're talking traditional archives here, not thin archives.) The old bfd_seek code recognized this by not attempting to optimize away seeks for archives. However, there was other code that could return bogus results. For example, cache.c limits the number of open files by closing a file and remembering its state once the limit is reached. If bfd_tell is called on an archive element when the containing archive is closed, it will return an invalid file pointer. It's possible to have a valid "where" field for archives by always using and updating the containing archive BFD. That's what this patch does. Note that cache.c used to find the containing archive BFD anyway for the iostream, so we're not really doing extra work, just transferring it up to the correct abstraction level. The patch also gets rid of some hacks. bfd_tell was called when bfd_seek failed, in an attempt to correct "where". That's got to be papering over another problem, so that code has been removed. bfd_read also had an "optimiziation" to return early when the number of bytes was zero, and bfd_seek optimized calls that didn't move the file pointer. This was covering for a coff_slurp_line_table bug where IO was attempted on a pe-dll BFD without an iovec. * bfd.c (struct bfd): Update comment on "where" usage. * bfdio.c (bfd_bwrite, bfd_stat): Use and update "iovec", "iostream", and "where" from containing archive file. Return error on NULL iovec. (bfd_bread): Similarly, and return error attempted out of bounds archive element access. (bfd_tell, bfd_flush): Use and update "iovec", "iostream", and "where" from containing archive file. (bfd_seek): Likewise. Return error on NULL iovec. Don't attempt to optimize away seeks. Don't paper over errors by calling bfd_tell. (bfd_get_mtime): Call bfd_stat rather than iovec->bstat. (bfd_get_size): Likewise. (bfd_mmap): Operate on and use iovec of containing archive file. Return error on NULL iovec. * cache.c (bfd_cache_lookup_worker): Abort if working on archive element bfd. (cache_bread_1): Delete bfd parameter, add FILE* parameter. Don't ignore zero byte reads. (cache_bread): Look up FILE* in cache here. Error on NULL lookup. (cache_bwrite): Rename "where" to "from". (cache_bmmap): Don't handle archive elements. * coffcode.h (coff_slurp_line_table): Exit early on zero lineno count. * bfd-in2.h: Regenerate.
2018-06-01Make _bfd_error_handler available outside libbfdAlan Modra1-8/+20
Needed when building libopcodes.so. bfd/ * bfd.c (_bfd_error_handler): Arrange for this function to be declared in bfd-in2.h. * libbfd-in.h (_bfd_error_handler): Don't declare. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. opcodes/ * sysdep.h (_bfd_error_handler): Don't declare. * msp430-decode.opc: Include bfd.h. Don't include ansidecl.h here. * rl78-decode.opc: Likewise. * msp430-decode.c: Regenerate. * rl78-decode.c: Regenerate.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra1-2/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove IEEE 695 object supportAlan Modra1-2/+0
include/ * ieee.h: Delete. bfd/ * Makefile.am: Remove IEEE 695 support. * archures.c: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * doc/bfdsumm.texi: Likewise. * section.c: Likewise. * targets.c: Likewise. * ieee.c: Delete. * libieee.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * Makefile.am: Remove IEEE 695 support. * budbg.h: Likewise. * doc/binutils.texi: Likewise. * makefile.vms: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * rddbg.c: Likewise. * ieee.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * app.c: Remove IEEE 695 support. * symbols.c: Likewise. ld/ * ld.texinfo: Remove IEEE 695 support. * mri.c: Likewise.
2018-04-16Remove netware supportAlan Modra1-1/+0
include/ * nlm/ChangeLog-9315: Delete. * nlm/alpha-ext.h: Delete. * nlm/common.h: Delete. * nlm/external.h: Delete. * nlm/i386-ext.h: Delete. * nlm/internal.h: Delete. * nlm/ppc-ext.h: Delete. * nlm/sparc32-ext.h: Delete. bfd/ * Makefile.am: Remove netware support. * bfd-in.h: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfdint.texi: Likewise. * ecoff.c: Likewise. * targets.c: Likewise. * libnlm.h: Delete. * nlm-target.h: Delete. * nlm.c: Delete. * nlm32-alpha.c: Delete. * nlm32-i386.c: Delete. * nlm32-ppc.c: Delete. * nlm32-sparc.c: Delete. * nlm32.c: Delete. * nlm64.c: Delete. * nlmcode.h: Delete. * nlmswap.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * .gitignore: Remove netware support. * Makefile.am: Likewise. * configure.ac: Likewise. * doc/Makefile.am: Likewise. * doc/binutils.texi: Likewise. * testsuite/binutils-all/nm.exp: Likewise. * nlmconv.c: Delete. * nlmconv.h: Delete. * nlmheader.y: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * Makefile.am: Remove netware support. * config/tc-i386.c: Likewise. * configure.tgt: Likewise. * config/te-netware.h: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gprof/ * corefile.c: Remove netware support. ld/ * Makefile.am: Remove netware support. * configure.tgt: Likewise. * testsuite/ld-powerpc/powerpc.exp: Likewise. * emulparams/i386nw.sh: Delete. * emulparams/ppcnw.sh: Delete. * scripttempl/nw.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-14powerpc common-page-sizeAlan Modra1-3/+10
max-page-size only matters for demand paged executables or shared libraries, and the ideal size is the largest value used by your operating system. Values larger than necessary just waste file space and memory. common-page-size also affects file and memory size, trading a possible small increase in file size for a decrease in memory size when the operating system is using a common-page-size page. With a powerpc max-page-size of 64k and common-page-size of 4k many executables will use no more memory pages when the system page size is 4k than an executable linked with -z max-page-size=0x1000, yet will still run on a system using 64k pages. However, when running on a system using 64k pages relro protection will not be completely effective. Due to the relro problem, powerpc binutils has been using a default common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7), leading to complaints about increased file and memory sizes. People not using relro do have a valid reason to complain.. So this patch introduces an extra back-end value to use as the default for common-page-size when generating relro executables, and enables the support for powerpc. Non relro executables will now be generated with a default common-page-size of 4k. bfd/ * elf-bfd.h (struct elf_backend_data): Add relropagesize. * elfxx-target.h (ELF_RELROPAGESIZE): Provide default and sanity test. (elfNN_bed): Init relropagesize. * bfd.c (bfd_emul_get_commonpagesize): Add boolean param to select relropagesize. * elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. (ELF_MINPAGESIZE): Don't define. * elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000. (ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE. * bfd-in2.h: Regenerate. ld/ * ldmain.c (main): Move config.maxpagesize and config.commonpagesize initialization to.. * ldemul.c (after_parse_default): ..here. * testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size. * testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-1/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-02-26BFD messagesAlan Modra1-21/+21
bfd/ * archive.c, * bfd.c, * linker.c, * reloc.c, * stabs.c, * syms.c: Standardize error/warning messages. binutils/ * testsuite/binutils-all/mips/mips-reginfo-n32.d, * testsuite/binutils-all/mips/mips-reginfo.d: Update. gas/ * testsuite/gas/mips/reginfo-2.l: Update. ld/ * testsuite/ld-arm/cmse-implib-errors.out, * testsuite/ld-arm/cmse-new-earlier-later-implib.out, * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out, * testsuite/ld-arm/cmse-new-wrong-implib.out, * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out, * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out, * testsuite/ld-cris/badgotr1.d, * testsuite/ld-cris/tls-err-24.d, * testsuite/ld-cris/tls-err-25.d, * testsuite/ld-cris/tls-err-26.d, * testsuite/ld-cris/tls-err-27.d, * testsuite/ld-cris/tls-err-28.d, * testsuite/ld-cris/tls-err-40.d, * testsuite/ld-cris/tls-err-44.d, * testsuite/ld-cris/tls-err-48.d, * testsuite/ld-cris/tls-err-52.d, * testsuite/ld-cris/tls-err-53.d, * testsuite/ld-cris/tls-err-55.d, * testsuite/ld-cris/tls-err-56.d, * testsuite/ld-cris/tls-err-62.d, * testsuite/ld-cris/tls-err-65.d, * testsuite/ld-cris/tls-err-77.d, * testsuite/ld-elf/empty-implib.out, * testsuite/ld-elf/indirect.exp: Update.
2018-02-19%L conversionsAlan Modra1-25/+1
* bfd-in.h: Include inttypes.h or if not available define PRId64, PRIu64 and PRIx64. * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Remove support for L modifier to print bfd_vma. * coff-arm.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic80.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * dwarf2.c, * elf-m10300.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-bfin.c, * elf32-cris.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32r.c, * elf32-m68k.c, * elf32-metag.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-ppc.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-s390.c, * elf64-sh64.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * ieee.c, * ihex.c, * mach-o.c, * merge.c, * mmo.c, * peXXigen.c, * xcofflink.c: Replace use of Lx modifier with PRIx64, and cast input to uint64_t, and similarly for Ld and Lu. * bfd-in2.h: Regenerate.
2018-02-19Use %pA and %pB in messages rather than %A and %BAlan Modra1-52/+56
First step towards compiler verification of _bfd_error_handler arguments, and better verification of translated messages. bfd/ * bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Handle %pA and %pB in place of %A and %B. * aout-adobe.c: Update all messages using %A and %B. * aout-cris.c: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * compress.c: Likewise. * cpu-arm.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-properties.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-sparc.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-wasm32.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfnn-riscv.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.c: Likewise. * hpux-core.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * peicode.h: Likewise. * reloc.c: Likewise. * rs6000-core.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * xcofflink.c: Likewise. ld/ * ldmisc.c (vfinfo): Handle %pA and %pB in place of %A and %B. * ldcref.c: Update all messages using %A and %B. * ldexp.c: Likewise. * ldlang.c: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * emultempl/beos.em: Likewise. * emultempl/cr16elf.em: Likewise. * emultempl/elf32.em: Likewise. * emultempl/m68kcoff.em: Likewise. * emultempl/m68kelf.em: Likewise. * emultempl/mmo.em: Likewise. * emultempl/nds32elf.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/sunos.em: Likewise. * emultempl/xtensaelf.em: Likewise.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-11Typo fixSangamesh Mallayya1-1/+1
Entirely the fault of that Alan Modra bloke. * bfd.c (bfd_get_sign_extend_vma): Correct typo.
2017-12-08Add aix 64-bit check to bfd_get_sign_extend_vmaSangamesh Mallayya1-1/+2
* bfd.c (bfd_get_sign_extend_vma): Handle aix5coff64-rs6000.
2017-12-06BFD whitespace fixesAlan Modra1-56/+56
Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
2017-11-15Handle ' and I format flagsAlan Modra1-14/+22
Also a little tidying and error checking. * bfd.c (union _bfd_doprnt_args): Add "Bad". (_bfd_doprnt): Handle more flags. (_bfd_doprnt_scan): Likewise. Tidy setting of args array. (error_handler_internal): Init args type to Bad.
2017-11-05Proper bound check in _bfd_doprnt_scanAlan Modra1-6/+6
While an abort after storing out of bounds by one to an array in our caller is probably OK in practice, it's better to check before storing. PR 22397 * bfd.c (_bfd_doprnt_scan): Check args index before storing, not after.
2017-11-05PR22397, BFD internal error when message locale isn't CAlan Modra1-31/+305
This adds positional parameter support to the bfd error handler, something that was lost 2017-04-13 when _doprnt was added with commit c08bb8dd. The number of format args is now limited to 9, which is sufficient for current _bfd_error_handler messages. If someone exceeds 9 args they get the joy of modifying this code to support more args (shouldn't be too difficult). PR 22397 * bfd.c (union _bfd_doprnt_args): New. (PRINT_TYPE): Add FIELD arg. Take value from args. (_bfd_doprnt): Replace ap parameter with args. Adjust all PRINT_TYPE invocations and reading of format args to suit. Move "%%" handling out of switch handling args. Support positional parameters. (_bfd_doprnt_scan): New function. (error_handler_internal): Call _bfd_doprnt_scan and read args.
2017-10-11Rename _doprnt -> _bfd_doprnt to fix DJGPP bfd build (and likely others)Pedro Alves1-6/+7
Building bfd/ for DJGPP, I see: ../../src/bfd/bfd.c:642:1: error: conflicting types for '_doprnt' _doprnt (FILE *stream, const char *format, va_list ap) ^~~~~~~ In file included from ../../src/bfd/sysdep.h:37:0, from ../../src/bfd/bfd.c:367: /usr/lib64/gcc/i586-pc-msdosdjgpp/6.1.0/include-fixed/stdio.h:171:5: note: previous declaration of '_doprnt' was here int _doprnt(const char *_fmt, va_list _args, FILE *_f); ^~~~~~~ Possible fixes the build on other systems too -- _doprnt was/is an exported symbol on old Unix/BSD systems too. bfd/ChangeLog: 2017-10-11 Pedro Alves <palves@redhat.com> * bfd.c (_doprnt): Rename to ... (_bfd_doprnt): ... this. (error_handler_internal): Adjust.
2017-10-05bfd_set_input_errorPedro Alves1-18/+33
A downside to the 2017-10-04 PR22245 fix is that bfd_set_error can now silently accept invalid errors if/when someone passes the a value of the wrong enumeration type, which previously would be caught by the -Wenum-conversion warning. PR 22245 * bfd.c (bfd_set_error): Revert 2017-10-04 change. Remove ellipsis parameter. Split out bfd_error_on_input code to.. (bfd_set_input_error): .. New function. * archive.c (_bfd_write_archive_contents): Use bfd_set_input_error. * vms-lib.c (_bfd_vms_lib_write_archive_contents): Likewise. * bfd-in2.h: Regenerate.
2017-10-04PR22245, Fix potential UB in bfd_set_errorPavel I. Kryukov1-2/+2
Passing enum as a first argument to variadic argument function may lead to undefined behavior. The explanation on CERT site: https://www.securecoding.cert.org/confluence/display/cplusplus/ EXP58-CPP.+Pass+an+object+of+the+correct+type+to+va_start The bug was found by Kirill Nedostoev (nedostoev.ka@phystech.edu) when he tried to build GNU binutils with Clang 7. PR 22245 * bfd.c (bfd_set_error): Avoid UB on passing arg to va_start that undergoes default promotion. * bfd-in2.h: Regenerate.
2017-07-07Another _doprnt fix for %L handlingAlan Modra1-12/+15
* bfd.c (_doprnt): Replace "L" with "ll" when printing bfd_vma as long long. Move code replacing "ll" with "I64", and simplify.
2017-07-06Convert 'L' to 'l' when setting wide_width to 1H.J. Lu1-1/+4
When setting wide_width to 1, convert 'L' to 'l'. Otherwise, %Lx/%Lu/%Ld will be passed to fprintf which will treat the argument as long long. * bfd.c (_doprnt): Convert 'L' to 'l' when setting wide_width to 1.
2017-07-03Support %Lx, %Lu, %Ld in _bfd_error_handler formatAlan Modra1-3/+21
One way to print 64-bit bfd_vma or bfd_size_type values on 32-bit hosts is to cast the value to long long and use the 'll' modifier in printf format strings. However, that's awkward because we also support the Microsoft C library printf that uses 'I64' as a modifier instead, and having variants of translated strings would not endear us to the translation project. So, rewrite the 'll' modifier in _doprint for Microsoft. Even with that capability it's not so nice for 32-bit code to need casts to long long, so this patch makes 'L' a modifier for bfd_vma rather than an alias for 'll'. I've then used the new 'L' modifier to fix selected format strings. * bfd.c (_doprnt): Rewrite "ll" and "L" modifiers to "I64" for __MSVCRT__. Support "L" modifier for bfd_vma. Formatting. * elf.c (setup_group): Use "Lx" to print sh_size. (_bfd_elf_setup_sections): Remove unnecessary cast and print unknown section type in hex. (copy_special_section_fields): Style fix. (bfd_section_from_shdr): Correct format for sh_link. Use a common error message for all the variants of unrecognized section types. (assign_file_positions_for_load_sections): Use "Lx" for lma adjust error message. (assign_file_positions_for_non_load_sections): Formatting. (rewrite_elf_program_header): Formatting. Use "Lx" for bfd_vma values in error messages. * elfcode.h (elf_slurp_reloc_table_from_section): Cast ELF_R_SYM value to type expected by format. * elflink.c (elf_link_read_relocs_from_section): Use "Lx" in error messages. (elf_link_add_object_symbols): Use "Lu" for symbol sizes. (elf_link_input_bfd): Use "Lx" for r_info. (bfd_elf_gc_record_vtinherit): Use "Lx" for offset.
2017-07-03BFD long long cleanupAlan Modra1-1/+1
long long isn't supposed to be used without a configure test, to support ancient compilers. Probably not terribly important nowadays. * bfd.c (bfd_scan_vma): Don't use long long unless HAVE_LONG_LONG. * coff-rs6000.c (FMT20): Handle hosts with 64-bit long and Microsoft C library variant of long long format specifier. (PRINT20): Cast value to bfd_uint64_t not long long. * coffcode.h (coff_print_aux): Use BFD_VMA_FMT. * coff-x86_64.c (coff_amd64_reloc): Use bfd_uint64_t rather than long long. Don't cast to bfd_vma. * elf32-score.c (score3_bfd_getl48): Likewise. * vms-alpha.c (_bfd_vms_slurp_eisd): Likewise.
2017-05-10bfd: new BFD target entry point _bfd_set_reloc.Jose E. Marchesi1-10/+2
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all BFD targets has been adapted to use it. This patch doesn't introduce any change on functionality, but prepares the ground for further work. bfd/ChangeLog: 2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com> * targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc. (struct bfd_target): New field _bfd_set_reloc. * bfd.c (bfd_set_reloc): Call backend _set_bfd. * reloc.c (_bfd_generic_set_reloc): New function. * coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc. * nlm-target.h (nlm_set_reloc): Likewise. * coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise. * aout-tic30.c (MY_set_reloc): Likewise. * aout-target.h (MY_set_reloc): Likewise. * elfxx-target.h (bfd_elfNN_set_reloc): Likewise. * coff-alpha.c (_bfd_ecoff_set_reloc): Likewise. * mach-o-target.c (bfd_mach_o_set_reloc): Likewise. * vms-alpha.c (alpha_vms_set_reloc): Likewise. * aout-adobe.c (aout_32_set_reloc): Likewise. * bout.c (b_out_set_reloc): Likewise. * coff-mips.c (_bfd_ecoff_set_reloc): Likewise. * i386os9k.c (aout_32_set_reloc): Likewise. * ieee.c (ieee_set_reloc): Likewise. * oasys.c (oasys_set_reloc): Likewise. * som.c (som_set_reloc): Likewise. * versados.c (versados_set_reloc): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_set_reloc. (rs6000_xcoff64_aix_vec): LIkewise. * libbfd.c (_bfd_norelocs_set_reloc): New function. * libbfd-in.h: Prototype for _bfd_norelocs_set_reloc. * i386msdos.c (msdos_set_reloc): Define to _bfd_norelocs_set_reloc. * elfcode.h (elf_set_reloc): Define. * bfd-in2.h: Regenerated.
2017-04-13Rewrite bfd error handlerAlan Modra1-148/+212
This steals _doprnt from libiberty, extended to handle %A and %B. Which lets us do away with the current horrible %A and %B handling that requires all %A and %B arguments to be passed first, rather than in the natural order. * bfd.c (PRINT_TYPE): Define. (_doprnt): New function. (error_handler_internal): Use _doprnt. * coff-arm.c: Put %A and %B arguments to _bfd_error_handler calls in their natural order, throughout file. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-tic80.c: Likewise. * cofflink.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arm.c: Likewise. * elf32-i386.c: Likewise. * elf32-m32r.c: Likewise. * elf32-msp430.c: Likewise. * elf32-spu.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-mips.c: Likewise.
2017-02-16[Patch] Add BFD_LINKER_CREATED to BFD_FLAGS_SAVEDJiong Wang1-2/+3
bfd/ * bfd.c (BFD_FLAGS_SAVED): Add BFD_LINKER_CREATED. * bfd-in2.h: Regenerated. Bug exposed by https://sourceware.org/ml/binutils/2017-02/msg00128.html
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-10-19Add c-format tags to translatable strings with more than one argument-using ↵Nick Clifton1-0/+3
formatting token. * aout-adobe.c: Add missing c-format tags for translatable strings. * aout-cris.c: Likewise. * aoutx.h: Likewise. * bfd.c: Likewise. * binary.c: Likewise. * cache.c: Likewise. * coff-alpha.c: Likewise. * coff-arm.c: Likewise. * coff-i860.c: Likewise. * coff-mcore.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic4x.c: Likewise. * coff-tic54x.c: Likewise. * coff-tic80.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * coffgen.c: Likewise. * cofflink.c: Likewise. * coffswap.h: Likewise. * cpu-arm.c: Likewise. * dwarf2.c: Likewise. * ecoff.c: Likewise. * elf-attrs.c: Likewise. * elf-eh-frame.c: Likewise. * elf-ifunc.c: Likewise. * elf-m10300.c: Likewise. * elf-s390-common.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-arm.c: Likewise. * elf32-avr.c: Likewise. * elf32-bfin.c: Likewise. * elf32-cr16.c: Likewise. * elf32-cr16c.c: Likewise. * elf32-cris.c: Likewise. * elf32-crx.c: Likewise. * elf32-d10v.c: Likewise. * elf32-d30v.c: Likewise. * elf32-epiphany.c: Likewise. * elf32-fr30.c: Likewise. * elf32-frv.c: Likewise. * elf32-gen.c: Likewise. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf32-i386.c: Likewise. * elf32-i960.c: Likewise. * elf32-ip2k.c: Likewise. * elf32-iq2000.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32c.c: Likewise. * elf32-m32r.c: Likewise. * elf32-m68hc11.c: Likewise. * elf32-m68hc12.c: Likewise. * elf32-m68hc1x.c: Likewise. * elf32-m68k.c: Likewise. * elf32-mcore.c: Likewise. * elf32-mep.c: Likewise. * elf32-metag.c: Likewise. * elf32-microblaze.c: Likewise. * elf32-moxie.c: Likewise. * elf32-msp430.c: Likewise. * elf32-mt.c: Likewise. * elf32-nds32.c: Likewise. * elf32-nios2.c: Likewise. * elf32-or1k.c: Likewise. * elf32-pj.c: Likewise. * elf32-ppc.c: Likewise. * elf32-rl78.c: Likewise. * elf32-rx.c: Likewise. * elf32-s390.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-sh-symbian.c: Likewise. * elf32-sh.c: Likewise. * elf32-sh64.c: Likewise. * elf32-spu.c: Likewise. * elf32-tic6x.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-v850.c: Likewise. * elf32-vax.c: Likewise. * elf32-visium.c: Likewise. * elf32-xgate.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-gen.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-ppc.c: Likewise. * elf64-s390.c: Likewise. * elf64-sh64.c: Likewise. * elf64-sparc.c: Likewise. * elf64-x86-64.c: Likewise. * elfcode.h: Likewise. * elfcore.h: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-mips.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-tilegx.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * libbfd.c: Likewise. * linker.c: Likewise. * m68klinux.c: Likewise. * mach-o.c: Likewise. * merge.c: Likewise. * mmo.c: Likewise. * oasys.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * peXXigen.c: Likewise. * pei-x86_64.c: Likewise. * peicode.h: Likewise. * ppcboot.c: Likewise. * reloc.c: Likewise. * sparclinux.c: Likewise. * srec.c: Likewise. * stabs.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * xcofflink.c: Likewise.
2016-10-07bfd_merge_private_bfd_data tidyAlan Modra1-21/+0
bfd_merge_private_bfd_data and _bfd_generic_verify_endian_match are linker functions, so move them to linker.c. bfd/ * Makefile.am (LIBBFD_H_FILES): Update. * doc/Makefile.am (LIBBFD_H_DEP): Likewise. * cpu-sh.c (sh_merge_bfd_arch): Move to.. * elf32-sh.c: ..here, and make static. * elf32-arc.c (arc_elf_merge_private_bfd_data): Delete extraneous error. * elf32-cris.c (cris_elf_merge_private_bfd_data): Don't call _bfd_generic_verify_endian_match. * elf32-microblaze.c (microblaze_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Define as _bfd_generic_verify_endian_match. * elf32-mt.c (mt_elf_merge_private_bfd_data): Don't test boolean == FALSE. * elf32-xgate.c (_bfd_xgate_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Don't define. * elf32-xgate.h (_bfd_xgate_elf_merge_private_bfd_data): Delete. * libbfd-in.h (_bfd_generic_verify_endian_match): Delete. * libbfd.c (_bfd_generic_verify_endian_match): Move to.. * linker.c: ..here, and make internal. * bfd.c (bfd_merge_private_bfd_data): Move to.. * linker.c: ..here. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. opcodes/ * sh-opc.h (sh_merge_bfd_arch): Delete prototype.
2016-09-30Remove syntactic sugarAlan Modra1-4/+4
Now that _bfd_error_handler is not a function pointer. * aout-adobe.c: Replace (*_bfd_error_handler) (...) with _bfd_error_handler (...) throughout. * aout-cris.c, * aoutx.h, * archive.c, * bfd.c, * binary.c, * cache.c, * coff-alpha.c, * coff-arm.c, * coff-h8300.c, * coff-i860.c, * coff-mcore.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * cpu-arm.c, * cpu-m68k.c, * cpu-sh.c, * dwarf2.c, * ecoff.c, * elf-eh-frame.c, * elf-m10300.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cris.c, * elf32-crx.c, * elf32-dlx.c, * elf32-frv.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-x86-64.c, * elfcode.h, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * hpux-core.c, * i386linux.c, * ieee.c, * ihex.c, * libbfd.c, * linker.c, * m68klinux.c, * mach-o.c, * merge.c, * mmo.c, * oasys.c, * osf-core.c, * pdp11.c, * pe-mips.c, * peXXigen.c, * pef.c, * plugin.c, * reloc.c, * rs6000-core.c, * sco5-core.c, * som.c, * sparclinux.c, * srec.c, * stabs.c, * syms.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * xcofflink.c: Likewise.
2016-09-30Make bfd_error_handler_type like vprintfAlan Modra1-45/+18
It was like printf, which means you can't use bfd_set_error_handler to hook in a function to do something and then call the original handler. The patch also deletes some unused functions and makes pointers local. bfd/ * bfd-in.h: Include stdarg.h. * bfd.c (bfd_error_handler_type): Make like vprintf. (_bfd_error_internal): Rename from _bfd_error_handler. Make static. (error_handler_internal): New function, split out from.. (_bfd_default_error_handler): ..here. Rename to _bfd_error_handler. (bfd_set_error_handler): Update. (bfd_get_error_handler, bfd_get_assert_handler): Delete. (_bfd_assert_handler): Make static. * coffgen.c (null_error_handler): Update params. * elf-bfd.h (struct elf_backend_data <link_order_error_handler>): Don't use bfd_error_handler_type. * elf64-mmix.c (mmix_dump_bpo_gregs): Likewise. * elfxx-target.h (elf_backend_link_order_error_handler): Default to _bfd_error_handler. * libbfd-in.h (_bfd_default_error_handler): Don't declare. (bfd_assert_handler_type): Likewise. (_bfd_error_handler): Update. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ * ldlang.c (ignore_bfd_errors): Update params.
2016-06-18Rename bfd_plugin_uknown to bfd_plugin_unknownH.J. Lu1-1/+1
bfd/ * bfd.c (bfd_plugin_format): Rename bfd_plugin_uknown to bfd_plugin_unknown. * bfd-in2.h: Regenerated. * plugin.c (bfd_plugin_object_p): Replace bfd_plugin_uknown with bfd_plugin_unknown. ld/ * plugin.c (plugin_object_p): Replace bfd_plugin_uknown with bfd_plugin_unknown.
2016-06-14Set my_archive for thin archivesAlan Modra1-1/+2
LTO plugin support in plugin_maybe_claim wants to close the IR bfd after replacing it with the recompiled object, but can't do so for archive elements due to various pointers that access the archive bfd. Thin archives have the same problem. They too cannot have their element bfds closed. PR ld/20241 bfd/ * archive.c (open_nested_file): Set my_archive. * bfd.c (_bfd_default_error_handler <%B>): Exclude archive file name for thin archives. * bfdio.c (bfd_tell): Don't adjust origin for thin archives. (bfd_seek): Likewise. * bfdwin.c (bfd_get_file_window): Likewise. * cache.c (cache_bmmap): Likewise. (bfd_cache_lookup_worker): Don't look in my_archive for thin archives. * mach-o.c (bfd_mach_o_follow_dsym): Don't open my_archive for thin archives. * plugin.c (try_claim): Likewise. * xcofflink.c (xcoff_link_add_dynamic_symbols): Use import path of file within thin archive, not the archive. binutils/ * bucomm.c (bfd_get_archive_filename): Return file name within thin archive. ld/ * ldmain.c (add_archive_element): Just print file name of file within thin archives. * ldmisc.c (vfinfo): Likewise. * plugin.c (plugin_object_p): Open file within thin archives. (plugin_maybe_claim): Expand comment.
2016-02-26Properly implement STT_COMMONH.J. Lu1-3/+10
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-10-06Clear the ch_reserved field in 64-bit outputH.J. Lu1-0/+2
It is better to clear the ch_reserved field of Elf64_External_Chdr in 64-bit output. * bfd.c (bfd_update_compression_header): Clear the ch_reserved field in 64-bit output. (bfd_convert_section_contents): Likewise.
2015-09-29Don't use the output section size to copy input sectionH.J. Lu1-3/+5
We can't use the output section size to copy input section since --interleave will shrink the output section. Instead, we change bfd_convert_section_contents to return the updated input section size. When we do that, we don't need to adjust the output section size to skip gap fills. bfd/ PR binutils/19020 * bfd.c (bfd_convert_section_contents): Add ptr_size parameter. * bfd-in2.h: Regenerated. binutils/ PR binutils/19020 * objcopy.c (copy_object): Don't adjust the output section size when copying from input sections. (copy_section): Use input section size for the copy. Get the updated section size from bfd_convert_section_contents. binutils/testsuite/ PR binutils/19020 * binutils-all/objcopy.exp: Run pr19020a and pr19020b. * lib/utils-lib.exp (run_dump_test): Support binary input. * binutils-all/pr19020.in: New file. * binutils-all/pr19020a.d: Likewise. * binutils-all/pr19020b.d: Likewise.
2015-09-21Use bfd_get_32 and bfd_put_32 to access ch_typeH.J. Lu1-4/+4
The ch_type field in Elf64_External_Chdr is 4 bytes. We should use bfd_get_32 and bfd_put_32 to access it. * bfd.c (bfd_update_compression_header): Use bfd_put_32 on ch_type. (bfd_check_compression_header): Use bfd_get_32 on ch_type. (bfd_convert_section_contents): Use bfd_get_32 and bfd_put_32 on ch_type.
2015-07-20Make binutils abort message GDB friendlyH.J. Lu1-2/+2
We used to generate abort messages like: internal error, aborting at .../bfd/elf64-x86-64.c line 1554 in elf_x86_64_check_relocs We can't cut and paste "file line ???" to GDB. This patch changes those abort messages to internal error, aborting at .../bfd/elf64-x86-64.c:1554 in elf_x86_64_check_relocs so that we can cut and paste "file:???" to GDB. bfd/ * bfd.c (_bfd_abort): Replace " line " with ":" in output message. gas/ * messages.c (as_assert): Replace " line " with ":" in output message. (as_abort): Likewise. ld/ * ldmisc.c (ld_abort): Replace " line " with ":" in output message.
2015-07-10Properly convert objects between different ELF classesH.J. Lu1-0/+155
The output SHF_COMPRESSED section size is different from input if ELF classes of input and output aren't the same. We must adjust the section sizes as well as the compression headers in SHF_COMPRESSED sections when converting objects between different ELF classes. bfd/ PR binutils/18656 * bfd.c (bfd_convert_section_size): New function. (bfd_convert_section_contents): Likewise. * bfd-in2.h: Regenerated. binutils/ 2015-07-10 H.J. Lu <hongjiu.lu@intel.com> PR binutils/18656 * objcopy.c (setup_section): Call bfd_convert_section_size to get the output section size. (copy_section): Get the section size from the output section and call bfd_get_full_section_contents to convert section contents for output. binutils/testsuite/ PR binutils/18656 * binutils-all/compress.exp (convert_test): New proc. Run conversion tests between x86-64 and x32.
2015-06-16Fix build when size_t is not available in bfd-in2.hJon Turney1-1/+1
bfd/ChangeLog: 2015-06-15 Jon Turney <jon.turney@dronecode.org.uk> * bfd.c: Change struct bfd_build_id to use bfd_size_type. * bfd-in2.h : Regenerate.
2015-06-15Allow gdb to find debug symbols file by build-id for PE file format alsoJon Turney1-0/+9
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-05-14Don't add the zlib header to SHF_COMPRESSED sectionH.J. Lu1-9/+21
In a SHF_COMPRESSED compressed section, the raw compressed data should begin immediately after the compression header. This patch removes the extra zlib header from the SHF_COMPRESSED section. bfd/ * bfd.c (bfd_update_compression_header): Also write the zlib header if the SHF_COMPRESSED bit cleared.. (bfd_check_compression_header): Return the uncompressed size. * compress.c (decompress_contents): Don't skip the zlib header. (bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB, which doesn't have the zlib header. (bfd_init_section_decompress_status): Likewise. (bfd_get_full_section_contents): Updated. (bfd_is_section_compressed): Likewise. (bfd_is_section_compressed_with_header): Return the uncompressed size. * elf.c (_bfd_elf_make_section_from_shdr): Updated. * bfd-in2.h: Regenerated. binutils/ * readelf.c (uncompress_section_contents): Add a parameter for uncompressed size. Don't check the zlib header. (load_specific_debug_section): Updated. binutils/testsuite/ * binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info" with "$OBJDUMP -W". * binutils-all/libdw2-compressedgabi.out: Updated. gas/ 2015-05-14 H.J. Lu <hongjiu.lu@intel.com> * write.c (compress_debug): Don't write the zlib header, which is handled by bfd_update_compression_header.
2015-04-23Don't change compressed input debug section namesH.J. Lu1-0/+3
Change compressed input debug section name for objdump is very confusing. But we need to change it for linker so that linker will consider the input section as a debug section. This patch delays section rename to elf_fake_sections for objcopy and avoids it for objdump. bfd/ PR binutils/18209 * bfd.c (bfd): Add is_linker_input. * elf.c (convert_debug_to_zdebug): New. (convert_zdebug_to_debug): Likewise. (_bfd_elf_make_section_from_shdr): Don't convert .debug_* to .zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME. (_bfd_elf_init_reloc_shdr): Pass a pointer to section name instead of a pointer to section. (elf_fake_sections): Rename the section name if SEC_ELF_RENAME is set. * section.c (SEC_ELF_RENAME): New. * bfd-in2.h: Regenerated. binutils/ PR binutils/18209 * objcopy.c (setup_section): Copy compress status. binutils/testsuite/ PR binutils/18209 * binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W on zlib-gabi output. * binutils-all/dw2-1.W: Convert section names to .zdebug_*. * binutils-all/dw2-3.W: Likewise. * binutils-all/objdump.W: Likewise. * binutils-all/dw2-3gabi.W: New file. ld/ PR binutils/18209 * ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
2015-04-08Add SHF_COMPRESSED support to gas and objcopyH.J. Lu1-3/+150
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-02-14PR ld/17973 LTO file symsAlan Modra1-0/+3
LTO output objects have an STT_FILE symbol using the name of the file, a temporary file. This results in executables that can't be exactly reproduced, so the file name needs to be dropped. We don't want to lose all file symbols when linking a mix of lto and non-lto objects as a file symbol can be used to figure which source file generated a given local symbol. So lto output objects need to be marked. I chose to mark lto output objects with a new bfd flag. This flag is also used to fix a bug in the link-once handling; An object being loaded after "loading_lto_outputs" is set might be one extracted from an archive to satisfy new references from lto objects, not an lto object itself. The new flag is copied from archive to elements, and the same done for no_export. This fixes a bug in that --exclude-libs doesn't work with thin archives. I'm not completely happy with this part of the patch and may revist this to avoid the hack in _bfd_look_for_bfd_in_cache. PR ld/17973 include/ * bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs. bfd/ * bfd.c (struct bfd): Add lto_output. * linker.c (_bfd_handle_already_linked): Explicitly test for objects added by the lto plugin. * opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and no_export flags from archive. * archive.c (open_nested_file): New function, setting lto_output and no_export, extracted from.. (find_nested_archive): ..here. Flip params. Rename from _bfd_find_nested_archive. (_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file. (_bfd_look_for_bfd_in_cache): Copy no_export. * elflink.c (elf_link_add_object_symbols): Remove now unnecessary my_archive->no_export test. (elf_link_input_bfd): Drop existing lto_output STT_FILE syms. Don't use the file name when adding lto_output STT_FILE sym. * bfd-in2.h: Regenerate. ld/ * ldlang.h (struct lang_input_statement_flags): Add lto_output. * ldlang.c (lang_process): Don't set loading_lto_outputs. * ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output to bfd. * plugin.c (add_input_file, add_input_library): Set flags.lto_output.
2015-02-11Merge linker plugin handling into BFD plugin supportH.J. Lu1-0/+14
Linker plugin_maybe_claim is the interface of linker plugin support. This patch extracts linker plugin_maybe_claim into plugin_object_p and makes it available to BFD via a new function: void register_ld_plugin_object_p (const bfd_target *(*) (bfd *)); bfd_plugin_object_p calls plugin_object_p registered by linker first. It adds an enum bfd_plugin_format field and a pointer to plugin dummy BFD so that plugin_object_p stores plugin dummy BFD to allow plugin_maybe_claim to retrieve it later. bfd/ PR ld/17878 * bfd.c (bfd_plugin_format): New. (bfd): Add plugin_format and plugin_dummy_bfd. * plugin.c (try_load_plugin): Take a pointer to bfd_boolean argument to return TRUE if any plugin is found. Set plugin_format. (has_plugin): New. (bfd_plugin_target_p): New. (bfd_plugin_specified_p): Likewise. (bfd_plugin_target_p): Likewise. (register_ld_plugin_object_p): Likewise. (bfd_plugin_set_plugin): Set has_plugin. (load_plugin): Cache try_load_plugin result. (bfd_plugin_object_p): Try ld_plugin_object_p first. Check plugin_format. * plugin.h (bfd_plugin_target_p): New. (bfd_plugin_specified_p): Likewise. (register_ld_plugin_object_p): Likewise. * bfd-in2.h: Regenerated. ld/ PR ld/17878 * plugin.c: Include ../bfd/plugin.h. (plugin_get_ir_dummy_bfd): Call bfd_create with link_info.output_bfd instead of srctemplate. Copy BFD info from srctemplate only if it doesn't use BFD plugin target vector. (plugin_load_plugins): Call register_ld_plugin_object_p with (plugin_object_p) (plugin_maybe_claim): Renamed to ... (plugin_object_p): This. Return dummy BFD target vector if input is calimed by plugin library, otherwise return NULL. Update plugin_format and plugin_dummy_bfd. (plugin_maybe_claim): New. Use plugin_object_p. xx
generated by cgit v1.1 at 2024-11-19 00:30:41 +0000