aboutsummaryrefslogtreecommitdiff
path: root/bfd/bfd.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-14Don't add the zlib header to SHF_COMPRESSED sectionH.J. Lu1-9/+21
In a SHF_COMPRESSED compressed section, the raw compressed data should begin immediately after the compression header. This patch removes the extra zlib header from the SHF_COMPRESSED section. bfd/ * bfd.c (bfd_update_compression_header): Also write the zlib header if the SHF_COMPRESSED bit cleared.. (bfd_check_compression_header): Return the uncompressed size. * compress.c (decompress_contents): Don't skip the zlib header. (bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB, which doesn't have the zlib header. (bfd_init_section_decompress_status): Likewise. (bfd_get_full_section_contents): Updated. (bfd_is_section_compressed): Likewise. (bfd_is_section_compressed_with_header): Return the uncompressed size. * elf.c (_bfd_elf_make_section_from_shdr): Updated. * bfd-in2.h: Regenerated. binutils/ * readelf.c (uncompress_section_contents): Add a parameter for uncompressed size. Don't check the zlib header. (load_specific_debug_section): Updated. binutils/testsuite/ * binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info" with "$OBJDUMP -W". * binutils-all/libdw2-compressedgabi.out: Updated. gas/ 2015-05-14 H.J. Lu <hongjiu.lu@intel.com> * write.c (compress_debug): Don't write the zlib header, which is handled by bfd_update_compression_header.
2015-04-23Don't change compressed input debug section namesH.J. Lu1-0/+3
Change compressed input debug section name for objdump is very confusing. But we need to change it for linker so that linker will consider the input section as a debug section. This patch delays section rename to elf_fake_sections for objcopy and avoids it for objdump. bfd/ PR binutils/18209 * bfd.c (bfd): Add is_linker_input. * elf.c (convert_debug_to_zdebug): New. (convert_zdebug_to_debug): Likewise. (_bfd_elf_make_section_from_shdr): Don't convert .debug_* to .zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME. (_bfd_elf_init_reloc_shdr): Pass a pointer to section name instead of a pointer to section. (elf_fake_sections): Rename the section name if SEC_ELF_RENAME is set. * section.c (SEC_ELF_RENAME): New. * bfd-in2.h: Regenerated. binutils/ PR binutils/18209 * objcopy.c (setup_section): Copy compress status. binutils/testsuite/ PR binutils/18209 * binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W on zlib-gabi output. * binutils-all/dw2-1.W: Convert section names to .zdebug_*. * binutils-all/dw2-3.W: Likewise. * binutils-all/objdump.W: Likewise. * binutils-all/dw2-3gabi.W: New file. ld/ PR binutils/18209 * ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
2015-04-08Add SHF_COMPRESSED support to gas and objcopyH.J. Lu1-3/+150
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-02-14PR ld/17973 LTO file symsAlan Modra1-0/+3
LTO output objects have an STT_FILE symbol using the name of the file, a temporary file. This results in executables that can't be exactly reproduced, so the file name needs to be dropped. We don't want to lose all file symbols when linking a mix of lto and non-lto objects as a file symbol can be used to figure which source file generated a given local symbol. So lto output objects need to be marked. I chose to mark lto output objects with a new bfd flag. This flag is also used to fix a bug in the link-once handling; An object being loaded after "loading_lto_outputs" is set might be one extracted from an archive to satisfy new references from lto objects, not an lto object itself. The new flag is copied from archive to elements, and the same done for no_export. This fixes a bug in that --exclude-libs doesn't work with thin archives. I'm not completely happy with this part of the patch and may revist this to avoid the hack in _bfd_look_for_bfd_in_cache. PR ld/17973 include/ * bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs. bfd/ * bfd.c (struct bfd): Add lto_output. * linker.c (_bfd_handle_already_linked): Explicitly test for objects added by the lto plugin. * opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and no_export flags from archive. * archive.c (open_nested_file): New function, setting lto_output and no_export, extracted from.. (find_nested_archive): ..here. Flip params. Rename from _bfd_find_nested_archive. (_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file. (_bfd_look_for_bfd_in_cache): Copy no_export. * elflink.c (elf_link_add_object_symbols): Remove now unnecessary my_archive->no_export test. (elf_link_input_bfd): Drop existing lto_output STT_FILE syms. Don't use the file name when adding lto_output STT_FILE sym. * bfd-in2.h: Regenerate. ld/ * ldlang.h (struct lang_input_statement_flags): Add lto_output. * ldlang.c (lang_process): Don't set loading_lto_outputs. * ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output to bfd. * plugin.c (add_input_file, add_input_library): Set flags.lto_output.
2015-02-11Merge linker plugin handling into BFD plugin supportH.J. Lu1-0/+14
Linker plugin_maybe_claim is the interface of linker plugin support. This patch extracts linker plugin_maybe_claim into plugin_object_p and makes it available to BFD via a new function: void register_ld_plugin_object_p (const bfd_target *(*) (bfd *)); bfd_plugin_object_p calls plugin_object_p registered by linker first. It adds an enum bfd_plugin_format field and a pointer to plugin dummy BFD so that plugin_object_p stores plugin dummy BFD to allow plugin_maybe_claim to retrieve it later. bfd/ PR ld/17878 * bfd.c (bfd_plugin_format): New. (bfd): Add plugin_format and plugin_dummy_bfd. * plugin.c (try_load_plugin): Take a pointer to bfd_boolean argument to return TRUE if any plugin is found. Set plugin_format. (has_plugin): New. (bfd_plugin_target_p): New. (bfd_plugin_specified_p): Likewise. (bfd_plugin_target_p): Likewise. (register_ld_plugin_object_p): Likewise. (bfd_plugin_set_plugin): Set has_plugin. (load_plugin): Cache try_load_plugin result. (bfd_plugin_object_p): Try ld_plugin_object_p first. Check plugin_format. * plugin.h (bfd_plugin_target_p): New. (bfd_plugin_specified_p): Likewise. (register_ld_plugin_object_p): Likewise. * bfd-in2.h: Regenerated. ld/ PR ld/17878 * plugin.c: Include ../bfd/plugin.h. (plugin_get_ir_dummy_bfd): Call bfd_create with link_info.output_bfd instead of srctemplate. Copy BFD info from srctemplate only if it doesn't use BFD plugin target vector. (plugin_load_plugins): Call register_ld_plugin_object_p with (plugin_object_p) (plugin_maybe_claim): Renamed to ... (plugin_object_p): This. Return dummy BFD target vector if input is calimed by plugin library, otherwise return NULL. Update plugin_format and plugin_dummy_bfd. (plugin_maybe_claim): New. Use plugin_object_p. xx
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-10-15Merge bfd_find_nearest_line variantsAlan Modra1-3/+3
When bfd_find_nearest_line_discriminator was added, not enough care was taken to ensure all targets had a proper definition of the function. This patch cures that by merging bfd_find_nearest_line_discriminator and bfd_find_nearest_line target implementations. PR 17481 * aoutx.h (NAME (aout, find_nearest_line)): Add "discriminator_ptr" param, group "section" and "offset" params. Zero discriminator. * bfd.c (bfd_find_nearest_line): Implement with new _bfd_find_nearest_line. (bfd_find_nearest_line_discriminator): Likewise. * coff-i386.c (_bfd_generic_find_nearest_line_discriminator): Don't define. * coff-rs6000.c (xcoff_find_nearest_line, xcoff_find_nearest_line_discriminator): Delete. (_bfd_xcoff_find_nearest_line): Don't define. (_bfd_xcoff_find_nearest_line): Define as coff_find_nearest_line. * coff-x86_64.c (_bfd_generic_find_nearest_line_discriminator): Don't define. * coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Adjust. * coffgen.c (coff_find_nearest_line_with_names): Reorder params, adjust _bfd_dwarf2_find_nearest_line call. (coff_find_nearest_line): Add "discriminator_ptr" param, reorder others. Set discriminator. Adjust call. (coff_find_nearest_line_discriminator): Delete. * dwarf1.c (_bfd_dwarf1_find_nearest_line): Reorder params. * dwarf2.c (find_line): Rename to.. (_bfd_dwarf2_find_nearest_line): ..this, reordering params. Simplify setting of do_line. Delete old function. (_bfd_dwarf2_find_line): Delete. * ecoff.c (_bfd_ecoff_find_nearest_line): Reorder params, add discriminator_ptr and set it. * elf-bfd.h (_bfd_elf_find_nearest_line): Update prototype. (_bfd_elf_find_nearest_line_discriminator): Delete. (_bfd_elf_find_line_discriminator): Delete. (_bfd_generic_find_nearest_line_discriminator): Don't define. * elf.c (elf_find_function): Reorder params. (_bfd_elf_find_nearest_line): Reorder params, add discriminator_ptr. Adjust calls. (_bfd_elf_find_nearest_line_discriminator): Delete. (_bfd_elf_find_line): Adjust call. * elf32-arm.c (arm_elf_find_function): Reorder params. (elf32_arm_find_nearest_line): Reorder params, add discriminator_ptr. Adjust calls. * elf64-alpha.c (elf64_alpha_find_nearest_line): Similarly. * elfnn-aarch64.c (aarch64_elf_find_function): Reorder params. (elfNN_aarch64_find_nearest_line): Reorder params, add discriminator_ptr. Adjust calls. * elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly. * elfxx-mips.h (_bfd_mips_elf_find_nearest_line): Update prototype. * libaout.h (NAME (aout, find_nearest_line)): Update prototype. * libbfd-in.h (_bfd_nosymbols_find_nearest_line): Update. (_bfd_dwarf1_find_nearest_line): Likewise. (_bfd_dwarf2_find_nearest_line): Likewise. (_bfd_dwarf2_find_line): Delete. (_bfd_generic_find_nearest_line_discriminator): Delete. * libbfd.c (_bfd_generic_find_nearest_line_discriminator): Delete. * libcoff-in.h (coff_find_nearest_line): Update prototype. (coff_find_nearest_line_discriminator): Delete. (coff_find_nearest_line_with_names): Update prototype. * libecoff.h (_bfd_ecoff_find_nearest_line): Update prototype. * mach-o.c (bfd_mach_o_find_nearest_line): Reorder params, add discriminator_ptr. Adjust calls. * mach-o.h (bfd_mach_o_find_nearest_line): Update prototype. * pdp11.c (NAME (aout, find_nearest_line)): Reorder params, add discriminator_ptr and set. * som.c (som_find_nearest_line): Similarly. * targets.c (BFD_JUMP_TABLE_SYMBOLS): Delete entry for _bfd_find_nearest_line_discriminator. (struct bfd_target <_bfd_find_nearest_line>): Adjust prototype. (struct bfd_target <_bfd_find_nearest_line_discriminator>): Delete. * vms-alpha.c (_bfd_vms_find_nearest_dst_line): Rename to.. (_bfd_vms_find_nearest_line): ..this. Reorder params, add "discriminator" and set. (_bfd_vms_find_nearest_line_discriminator): Delete. (_bfd_generic_find_nearest_line_discriminator): Don't define. (alpha_vms_find_nearest_line): Update define. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate.
2014-07-01Reorganise struct bfdAlan Modra1-59/+53
for better packing. Removes a field and a flag that are never set. bfd/ * bfd.c (struct bfd): Reorganise for better packing. Delete "ifd" field. Make "format", "direction" and "flags" bitfields. (HAS_LOAD_PAGE): Delete, renumber following flags. * bfd-in2.h: Regenerate. * coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs. binutils/ * objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
2014-06-13Free linker hash table from bfd_close.Alan Modra1-0/+3
Also tidies numerous error exit paths in various link_hash_table_create functions that failed to free memory. include/ * bfdlink.h (struct bfd_link_hash_table): Add hash_table_free field. bfd/ * archive.c: Include bfdlink.h. (_bfd_archive_close_and_cleanup): Call linker hash_table_free. * bfd.c (struct bfd): Add is_linker_output field. * elf-bfd.h (_bfd_elf_link_hash_table_free): Update prototype. * linker.c (_bfd_link_hash_table_init): Set up hash_table_free, link.hash and is_linker_output. (_bfd_generic_link_hash_table_free): Replace bfd_link_hash_table* param with bfd*. Assert is_linker_output and link.hash, and clear them before exit. * elf-m10300.c (elf32_mn10300_link_hash_table_free): Replace bfd_link_hash_table* param with bfd*. Hack is_linker_output and link.hash so we can free two linker hash tables. (elf32_mn10300_link_hash_table_create): Create static_hash_table first. Clean up on errors. Set hash_table_free pointer. * elf32-arm.c (elf32_arm_link_hash_table_free): Replace bfd_link_hash_table* param with bfd*. (elf32_arm_link_hash_table_create): Clean up on errors. Set hash_table_free pointer. * elf32-avr.c, * elf32-hppa.c, * elf32-i386.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-metag.c, * elf32-nios2.c, * elf32-xgate.c, * elf64-ia64-vms.c, * elf64-ppc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-sparc.c, * xcofflink.c: Similarly. * simple.c (bfd_simple_get_relocated_section_contents): Save and clear link.next before creating linker hash table. Clean up on errors, and restore link.next on exit. * elf32-m68hc1x.h (m68hc11_elf_bfd_link_hash_table_free): Delete. * elf32-xgate.h (xgate_elf_bfd_link_hash_table_free): Delete. * elfxx-sparc.h (_bfd_sparc_elf_link_hash_table_free): Delete. * libcoff-in.h (_bfd_xcoff_bfd_link_hash_table_free): Delete. * hash.c (bfd_hash_table_init_n): Free table on error. * libbfd-in.h (_bfd_generic_link_hash_table_free): Update proto. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate.
2014-06-13Don't call bfd_link_hash_table_freeAlan Modra1-3/+0
Freeing the linker hash table is a royal pain. It can't be freed before the _bfd_write_contents call in bfd_close, because some target bfd_write_contents functions access the hash table. It can't be freed after bfd_close either, since bfd_alloc memory holding side data structures disappears (PR17047). Clearly the only place it can be freed is actually in bfd_close. This patch doesn't do that, but kills off the existing means of freeing the hash table via a bfd target xvec call. bfd/ PR 17047 * targets.c (BFD_JUMP_TABLE): Delete NAME##_bfd_link_hash_table_free. (struct bfd_target <_bfd_link_hash_table_free>): Delete. * bfd.c (bfd_link_hash_table_free): Don't define. * aout-adobe.c, * aout-target.h, * aout-tic30.c, * binary.c, * bout.c, * coff64-rs6000.c, * coffcode.h, * elf-m10300.c, * elf32-arm.c, * elf32-avr.c, * elf32-hppa.c, * elf32-i386.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-metag.c, * elf32-nios2.c, * elf32-sparc.c, * elf32-xgate.c, * elf64-ia64-vms.c, * elf64-ppc.c, * elf64-sparc.c, * elf64-x86-64.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfxx-target.h, * i386msdos.c, * i386os9k.c, * ieee.c, * ihex.c, * libbfd-in.h, * libecoff.h, * mach-o-target.c, * mmo.c, * nlm-target.h, * oasys.c, * pef.c, * plugin.c, * ppcboot.c, * som.c, * srec.c, * tekhex.c, * verilog.c, * versados.c, * vms-alpha.c, * xsym.c: Don't define various link_hash_table_free defines, and remove from bfd_target vars. Temporarily reference some of the target link_hash_table_free functions to avoid warnings. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ PR 17047 * ldlang.c (output_bfd_hash_table_free_fn): Delete. (open_output): Don't set it.. * ldmain.c (ld_cleanup): ..or call it.
2014-06-13Make bfd.link_next field a unionAlan Modra1-2/+6
This field of struct bfd is currently only used to chain together linker input files. This patch prepares to use the field to stash the linker hash table, which is always created on the linker output file. bfd/ * bfd.c (struct bfd): Replace link_next with a union. * aoutx.h, * bfd.c, * coff-ppc.c, * coff-rs6000.c, * cofflink.c, * ecoff.c, * elf-m10300.c, * elf32-arm.c, * elf32-avr.c, * elf32-hppa.c, * elf32-i386.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * linker.c, * pdp11.c, * peXXigen.c, * simple.c, * sunos.c, * vms-alpha.c, * xcofflink.c: Update for above. * bfd-in2.h: Regenerate. include/ * bfdlink.h: Update for bfd.link_next change. ld/ * emultempl/cr16elf.em, * emultempl/elf32.em, * emultempl/genelf.em, * emultempl/m68kcoff.em, * emultempl/m68kelf.em, * emultempl/nds32elf.em, * emultempl/pe.em, * emultempl/pep.em, * ldlang.c, * ldmain.c, * pe-dll.c: Update for bfd.link_next change.
2014-04-04bfd_get_arch_size: return size from arch info on non-ELF targets.Tristan Gingold1-4/+6
bfd/ * bfd.c (bfd_get_arch_size): Default is taken from arch.
2014-03-05Update copyright yearsAlan Modra1-1/+1
2014-01-29Following up on Tom's suggestion I am checking in a patch to replace the variousNick Clifton1-0/+8
bfd_xxx_set macros with static inline functions, so that we can avoid compile time warnings about comma expressions with unused values. * bfd-in.h (bfd_set_section_vma): Delete. (bfd_set_section_alignment): Delete. (bfd_set_section_userdata): Delete. (bfd_set_cacheable): Delete. * bfd.c (bfd_set_cacheable): New static inline function. * section.c (bfd_set_section_userdata): Likewise. (bfd_set_section_vma): Likewise. (bfd_set_section_alignment): Likewise. * bfd-in2.h: Regenerate.
2013-05-09Use fputc in place of putc to avoid -Wunused-value warning (AIX).Joel Brobecker1-1/+3
Currently, bfd does not compile with -Wunused-value because the following code: val = putc ('\n', f); gets expanded into some code that triggers a warning: warning: value computed is not used [-Wunused-value] This is because putc is implemented as a macro... >#define putc(__x, __p) (((!((__p)->_flag & 0xC000)) && \ > ((__p)->_flag = ((__p)->_flag & 0x3FFF) | 0x8000)),\ > (--(__p)->_cnt < 0 ? \ > __flsbuf((unsigned char) (__x), (__p)) : \ > (int) (*(__p)->_ptr++ = (unsigned char) (__x)))) It's the first part, before the coma operator, which triggers the unused-value warning. This patch fixes the issue by simply avoiding the macro and using fputc instead. bfd/ChangeLog: * bfd.c (_bfd_default_error_handler): Replace use of putc by fputc. Add comment explaining why.
2013-04-09 * bfd.c (typedef bfd, Error reporting, Miscellaneous): Add INODEs.Nick Clifton1-3/+10
* bfd.texinfo (typedef bfd, Error reporting, Miscellaneous): Add menu items.
2013-04-04 * bfd.c (bfd_error_type, bfd_errmsgs): Add bfd_error_missing_dso.Alan Modra1-0/+2
* bfd-in2.h: Regenerate. * elflink.c (elf_link_add_object_symbols): Use new error.
2013-02-21bfd/Alan Modra1-1/+1
* elf-bfd.h (struct elf_obj_tdata): Rename segment_map to seg_map. Delete num_locals and num_globals. (elf_num_locals, elf_num_globals): Don't define. (elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker, elf_stack_flags, elf_strtab_sec, elf_shstrtab_sec): Define. * bfd.c, * elf-eh-frame.c, * elf-nacl.c, * elf-vxworks.c, * elf.c, * elf32-arm.c, * elf32-lm32.c, * elf32-ppc.c, * elf32-rx.c, * elf32-spu.c, * elf64-hppa.c, * elfcode.h, * elflink.c, * elfnn-ia64.c, * elfxx-mips.c: Use newly defined elf_obj_tdata accessor macros. * elf.c (elf_map_symbols): Add pnum_locals param. Return number of locals syms via new param. (swap_out_syms): Adjust to suit elf_map_symbols change. ld/ * emultempl/elf-generic.em: Use newly defined elf_obj_tdata accessor macros.
2013-01-26 * bfd.c (struct bfd_preserve, bfd_preserve_save, bfd_preserve_restore,Alan Modra1-122/+0
bfd_preserve_finish): Move to.. * format.c: ..here, splitting out.. (bfd_reinit): ..this. New function. (bfd_check_format_matches): Use bfd_preserve_save/restore to keep bfd state for a match. * elfcode.h (elf_object_p): Don't use bfd_preserve_save/restore. * elfcore.h (elf_core_file_p): Likewise. * mach-o.c (bfd_mach_o_header_p): Likewise. * pef.c (bfd_pef_object_p, bfd_pef_xlib_object_p): Likewise. * xsym.c (bfd_sym_object_p): Likewise. * mmo.c (mmo_scan): Clear abfd->symcount. * opncls.c (_bfd_new_bfd): Use a smaller section hash table. * section.c (bfd_section_list_clear): Clear section_htab.count. * bfd-in2.h: Regenerate.
2012-07-242012-07-24 Teresa Johnson <tejohnson@google.com>Cary Coutant1-0/+5
bfd/ * bfd.c (bfd_find_nearest_line_discriminator): New macro. * coff-rs6000.c: Init _bfd_find_nearest_line_discriminator. * coff64-rs6000.c: Likewise. * dwarf2.c (struct line_info): Add discriminator field. (add_line_info): Fill in new discriminator field. (decode_line_info): Record discriminator information instead of ignoring it. (lookup_address_in_line_info_table): Return discriminator field if requested. (comp_unit_find_nearest_line): Add discriminator argument. (find_line): Likewise. (_bfd_dwarf2_find_nearest_line): Likewise. (_bfd_dwarf2_find_line): Likewise. * elf-bfd.h (_bfd_elf_find_nearest_line_discriminator): New. (_bfd_elf_find_line_discriminator): Likewise. (_bfd_generic_find_nearest_line_discriminator): Likewise. Defined. * elf.c (_bfd_elf_find_nearest_line): Change to a wrapper that invokes _bfd_elf_find_nearest_line_discriminator with correct arguments. (_bfd_elf_find_nearest_line_discriminator): New. (_bfd_elf_find_line): Change to a wrapper that invokes _bfd_elf_find_line_discriminator with correct arguments. (_bfd_elf_find_line_discriminator): New. * coffgen.c (coff_find_nearest_line_with_names): Handle new discriminator argument. * elf32-arm.c (elf32_arm_find_nearest_line): Likewise. * elf64-alpha.c (elf64_alpha_find_nearest_line): Likewise. * elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Likewise. * mach-o.c (bfd_mach_o_find_nearest_line): Likewise. * libbfd-in.h (_bfd_dwarf2_find_nearest_line): Add discriminator argument. (_bfd_dwarf2_find_line): Likewise. (_bfd_generic_find_nearest_line_discriminator): New. * libbfd.c (_bfd_generic_find_nearest_line_discriminator): New. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. * targets.c (BFD_JUMP_TABLE_SYMBOLS): Initialize _bfd_find_nearest_line_discriminator with _bfd_generic_find_nearest_line_discriminator. (bfd_target): Add _bfd_find_nearest_line_discriminator. binutils/ * addr2line.c (find_address_in_section): Invoke bfd_find_nearest_line_discriminator to get the discriminator. (find_offset_in_section): Likewise. (translate_addresses): Print discriminator if it is non-zero. * objdump.c (show_line): Invoke bfd_find_nearest_line_discriminator to get the discriminator, and keep track of prev_discriminator. Print discriminator if it is non-zero. (disassemble_data): Initialize prev_discriminator. (dump_reloc_set): Invoke bfd_find_nearest_line_discriminator to get the discriminator, and keep track of last_discriminator. Print discriminator if it is non-zero.
2012-05-14Add support for PowerPC VLE.James Lemke1-2/+2
2012-05-14 Catherine Moore <clm@codesourcery.com> * NEWS: Mention PowerPC VLE port. 2012-05-14 James Lemke <jwlemke@codesourcery.com> Catherine Moore <clm@codesourcery.com> bfd/ * bfd.c (bfd_lookup_section_flags): Add section parm. * ecoff.c (bfd_debug_section): Remove flag_info initializer. * elf-bfd.h (bfd_elf_section_data): Move in section_flag_info. (bfd_elf_lookup_section_flags): Add section parm. * elf32-ppc.c (is_ppc_vle): New function. (ppc_elf_modify_segment_map): New function. (elf_backend_modify_segment_map): Define. (has_vle_insns): New define. * elf32-ppc.h (ppc_elf_modify_segment_map): Declare. * elflink.c (bfd_elf_lookup_section_flags): Add return value & parm. Move in logic to omit / include a section. * libbfd-in.h (bfd_link_info): Add section parm. (bfd_generic_lookup_section_flags): Likewise. * reloc.c (bfd_generic_lookup_section_flags): Likewise. * section.c (bfd_section): Move out section_flag_info. (BFD_FAKE_SECTION): Remove flag_info initializer. * targets.c (_bfd_lookup_section_flags): Add section parm. 2012-05-14 Catherine Moore <clm@codesourcery.com> bfd/ * archures.c (bfd_mach_ppc_vle): New. * bfd-in2.h: Regenerated. * cpu-powerpc.c (bfd_powerpc_archs): New entry for vle. * elf32-ppc.c (split16_format_type): New enumeration. (ppc_elf_vle_split16): New function. (HOWTO): Add entries for R_PPC_VLE relocations. (ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations. (ppc_elf_section_flags): New function. (ppc_elf_lookup_section_flags): New function. (ppc_elf_section_processing): New function. (ppc_elf_check_relocs): Handle PPC_VLE relocations. (ppc_elf_relocation_section): Likewise. (elf_backend_lookup_section_flags_hook): Define. (elf_backend_section_flags): Define. (elf_backend_section_processing): Define. * elf32-ppc.h (ppc_elf_section_processing): Declare. * libbfd.h: Regenerated. * reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15, BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A, BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A, BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A, BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21, BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A, BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A, BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A, BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations. 2012-05-14 James Lemke <jwlemke@codesourcery.com> gas/ * config/tc-ppc.c (insn_validate): New func of existing code to call.. (ppc_setup_opcodes): ..from 2 places here. Revise for second (VLE) opcode table. Add #ifdef'd code to print opcode tables. 2012-05-14 James Lemke <jwlemke@codesourcery.com> gas/ * config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order for the VLE conditional branches. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> gas/ * config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro. (PPC_VLE_SPLIT16D): New macro. (PPC_VLE_LO16A): New macro. (PPC_VLE_LO16D): New macro. (PPC_VLE_HI16A): New macro. (PPC_VLE_HI16D): New macro. (PPC_VLE_HA16A): New macro. (PPC_VLE_HA16D): New macro. (PPC_APUINFO_VLE): New definition. (md_chars_to_number): New function. (md_parse_option): Check for combinations of little endian and -mvle. (md_show_usage): Document -mvle. (ppc_arch): Recognize VLE. (ppc_mach): Recognize bfd_mach_ppc_vle. (ppc_setup_opcodes): Print the opcode table if * config/tc-ppc.h (ppc_frag_check): Declare. * doc/c-ppc.texi: Document -mvle. * NEWS: Mention PowerPC VLE port. 2012-05-14 Catherine Moore <clm@codesourcery.com> gas/ * config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare. (DWARF2_LINE_MIN_INSN_LENGTH): Redefine. * config/tc-ppc.c (ppc_dw2_line_min_insn_length): New. * dwarf2dbg.c (scale_addr_delta): Handle values of 1 for DWARF2_LINE_MIN_INSN_LENGTH. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> gas/testsuite/ * gas/ppc/ppc.exp: Run new tests. * gas/ppc/vle-reloc.d: New test. * gas/ppc/vle-reloc.s: New test. * gas/ppc/vle-simple-1.d: New test. * gas/ppc/vle-simple-1.s: New test. * gas/ppc/vle-simple-2.d: New test. * gas/ppc/vle-simple-2.s: New test. * gas/ppc/vle-simple-3.d: New test. * gas/ppc/vle-simple-3.s: New test. * gas/ppc/vle-simple-4.d: New test. * gas/ppc/vle-simple-4.s: New test. * gas/ppc/vle-simple-5.d: New test. * gas/ppc/vle-simple-5.s: New test. * gas/ppc/vle-simple-6.d: New test. * gas/ppc/vle-simple-6.s: New test. * gas/ppc/vle.d: New test. * gas/ppc/vle.s: New test. 2012-05-14 James Lemke <jwlemke@codesourcery.com> include/elf/ * ppc.h (SEC_PPC_VLE): Remove. 2012-05-14 Catherine Moore <clm@codesourcery.com> James Lemke <jwlemke@codesourcery.com> include/elf/ * ppc.h (R_PPC_VLE_REL8): New reloction. (R_PPC_VLE_REL15): Likewise. (R_PPC_VLE_REL24): Likewise. (R_PPC_VLE_LO16A): Likewise. (R_PPC_VLE_LO16D): Likewise. (R_PPC_VLE_HI16A): Likewise. (R_PPC_VLE_HI16D): Likewise. (R_PPC_VLE_HA16A): Likewise. (R_PPC_VLE_HA16D): Likewise. (R_PPC_VLE_SDA21): Likewise. (R_PPC_VLE_SDA21_LO): Likewise. (R_PPC_VLE_SDAREL_LO16A): Likewise. (R_PPC_VLE_SDAREL_LO16D): Likewise. (R_PPC_VLE_SDAREL_HI16A): Likewise. (R_PPC_VLE_SDAREL_HI16D): Likewise. (R_PPC_VLE_SDAREL_HA16A): Likewise. (R_PPC_VLE_SDAREL_HA16D): Likewise. (SEC_PPC_VLE): Remove. (PF_PPC_VLE): New program header flag. (SHF_PPC_VLE): New section header flag. (vle_opcodes, vle_num_opcodes): New. (VLE_OP): New macro. (VLE_OP_TO_SEG): New macro. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> include/opcode/ * ppc.h (PPC_OPCODE_VLE): New definition. (PPC_OP_SA): New macro. (PPC_OP_SE_VLE): New macro. (PPC_OP): Use a variable shift amount. (powerpc_operand): Update comments. (PPC_OPSHIFT_INV): New macro. (PPC_OPERAND_CR): Replace with... (PPC_OPERAND_CR_BIT): ...this and (PPC_OPERAND_CR_REG): ...this. 2012-05-14 James Lemke <jwlemke@codesourcery.com> ld/ * ldlang.c (walk_wild_consider_section): Don't copy section_flag_list. Pass it to callback. (walk_wild_section_general): Pass section_flag_list to callback. (lang_add_section): Add sflag_list parm. Move out logic to keep / omit a section & call bfd_lookup_section_flags. (output_section_callback_fast): Add sflag_list parm. Add new parm to lang_add_section calls. (output_section_callback): Likewise. (check_section_callback): Add sflag_list parm. (lang_place_orphans): Add new parm to lang_add_section calls. (gc_section_callback): Add sflag_list parm. (find_relro_section_callback): Likewise. * ldlang.h (callback_t): Add flag_info parm. (lang_add_section): Add sflag_list parm. * emultempl/armelf.em (elf32_arm_add_stub_section): Add lang_add_section parm. * emultempl/beos.em (gld*_place_orphan): Likewise. * emultempl/elf32.em (gld*_place_orphan): Likewise. * emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise. * emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise. * emultempl/mipself.em (mips_add_stub_section): Likewise. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_*_place_orphan): Likewise. * emultempl/pep.em (gld_*_place_orphan): Likewise. * emultempl/ppc64elf.em (ppc_add_stub_section): Likewise. * emultempl/spuelf.em (spu_place_special_section): Likewise. * emultempl/vms.em (vms_place_orphan): Likewise. 2012-05-14 James Lemke <jwlemke@codesourcery.com> ld/testsuite/ * ld-powerpc/powerpc.exp: Create ppceabitests. * ld-powerpc/vle-multiseg.s: New. * ld-powerpc/vle-multiseg-1.d: New. * ld-powerpc/vle-multiseg-1.ld: New. * ld-powerpc/vle-multiseg-2.d: New. * ld-powerpc/vle-multiseg-2.ld: New. * ld-powerpc/vle-multiseg-3.d: New. * ld-powerpc/vle-multiseg-3.ld: New. * ld-powerpc/vle-multiseg-4.d: New. * ld-powerpc/vle-multiseg-4.ld: New. * ld-powerpc/vle-multiseg-5.d: New. * ld-powerpc/vle-multiseg-5.ld: New. * ld-powerpc/vle-multiseg-6.d: New. * ld-powerpc/vle-multiseg-6.ld: New. * ld-powerpc/vle-multiseg-6a.s: New. * ld-powerpc/vle-multiseg-6b.s: New. * ld-powerpc/vle-multiseg-6c.s: New. * ld-powerpc/vle-multiseg-6d.s: New. * ld-powerpc/powerpc.exp: Run new tests. 2012-05-14 Catherine Moore <clm@codesourcery.com> ld/ * NEWS: Mention PowerPC VLE port. 2012-05-14 Catherine Moore <clm@codesourcery.com> ld/testsuite/ * ld-powerpc/apuinfo.rd: Update for VLE. * ld-powerpc/vle-reloc-1.d: New. * ld-powerpc/vle-reloc-1.s: New. * ld-powerpc/vle-reloc-2.d: New. * ld-powerpc/vle-reloc-2.s: New. * ld-powerpc/vle-reloc-3.d: New. * ld-powerpc/vle-reloc-3.s: New. * ld-powerpc/vle-reloc-def-1.s: New. * ld-powerpc/vle-reloc-def-2.s: New. * ld-powerpc/vle-reloc-def-3.s: New. 2012-05-14 James Lemke <jwlemke@codesourcery.com> opcodes/ * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle. (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines. (vle_opcd_indices): New array. (lookup_vle): New function. (disassemble_init_powerpc): Revise for second (VLE) opcode table. (print_insn_powerpc): Likewise. * ppc-opc.c: Likewise. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> Nathan Froyd <froydnj@codesourcery.com> opcodes/ * ppc-opc.c (insert_arx, extract_arx): New functions. (insert_ary, extract_ary): New functions. (insert_li20, extract_li20): New functions. (insert_rx, extract_rx): New functions. (insert_ry, extract_ry): New functions. (insert_sci8, extract_sci8): New functions. (insert_sci8n, extract_sci8n): New functions. (insert_sd4h, extract_sd4h): New functions. (insert_sd4w, extract_sd4w): New functions. (insert_vlesi, extract_vlesi): New functions. (insert_vlensi, extract_vlensi): New functions. (insert_vleui, extract_vleui): New functions. (insert_vleil, extract_vleil): New functions. (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT. (BI16, BI32, BO32, B8): New. (B15, B24, CRD32, CRS): New. (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG. (DB, IMM20, RD, Rx, ARX, RY, RZ): New. (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New. (SH6_MASK): Use PPC_OPSHIFT_INV. (SI8, UI5, OIMM5, UI7, BO16): New. (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New. (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV. (ALLOW8_SPRG): New. (insert_sprg, extract_sprg): Check ALLOW8_SPRG. (OPVUP, OPVUP_MASK OPVUP): New (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New. (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New. (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New. (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New. (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New. (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New. (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New. (SE_IM5, SE_IM5_MASK): New. (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New. (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New. (BO32DNZ, BO32DZ): New. (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE. (PPCVLE): New. (powerpc_opcodes): Add new VLE instructions. Update existing instruction to include PPCVLE if supported. * ppc-dis.c (ppc_opts): Add vle entry. (get_powerpc_dialect): New function. (powerpc_init_dialect): VLE support. (print_insn_big_powerpc): Call get_powerpc_dialect. (print_insn_little_powerpc): Likewise. (operand_value_powerpc): Handle negative shift counts. (print_insn_powerpc): Handle 2-byte instruction lengths.
2012-04-26Revert accidental check-in.Hans-Peter Nilsson1-6/+0
2012-04-26 Provide a way for programs to recognize BFD_ASSERT calls.Hans-Peter Nilsson1-2/+90
* bfd.c (bfd_assert_handler_type): New API type. (bfd_set_assert_handler, bfd_get_assert_handler): New API functions. (_bfd_assert_handler): New variable. (_bfd_default_assert_handler): New function. (bfd_assert): Call _bfd_assert_handler, not _bfd_error_handler. * libbfd-in.h (_bfd_assert_handler): Declare. * libbfd.h, bfd-in2.h: Regenerate.
2011-07-11include/ChangeLogCatherine Moore1-0/+3
2011-07-11 Catherine Moore <clm@codesourcery.com> * bfdlink.h (flag_type): New enumeration. (flag_info_list): New structure. (flag_info): New structure. bfd/ChangeLog 2011-07-11 Catherine Moore <clm@codesourcery.com> * aout-adobe.c (aout_32_bfd_lookup_section_flags): New definition. * aout-target.h (MY_bfd_lookup_section_flags): New definition. * aout-tic30.c (MY_bfd_lookup_section_flags): New definition. * bfd-in2.h: Regenerated. * bfd.c (bfd_lookup_section_flags): New definition. * binary.c (binary_bfd_lookup_section_flags): New definition. * bout.c (b_out_bfd_lookup_section_flags): New definition. * coff-alpha.c (_bfd_ecoff_bfd_lookup_section_flags): New definition. * coff-mips.c (_bfd_ecoff_bfd_lookup_section_flags): New definition. * coff-rs6000.c (rs6000coff_vec): Include bfd_generic_lookup_section_flags. (pmac_xcoff_vec): Likewise. * coffcode.h (coff_bfd_lookup_section_flags): New definition. * coff64-rs6000.c (rs6000coff64_vec): Include bfd_generic_lookup_section_flags. (aix5coff64_vec): Likewise. * ecoff.c (bfd_debug_section): Initialize flag_info field. * elf-bfd.h (elf_backend_lookup_section_flags_hook): Declare. (bfd_elf_lookup_section_flags): Declare. * elflink.c (bfd_elf_lookup_section_flags): New function. * elfxx-target.h (bfd_elfNN_bfd_lookup_section_flags): Define. (elf_backend_lookup_section_flags_hook): Define. (elf_backend_data): Add elf_backend_lookup_section_flags_hook. * i386msdos.c (msdos_bfd_lookup_section_flags): New define. * i386os9k.c (os9k_bfd_lookup_section_flags): New define. * ieee.c (ieee_bfd_lookup_section_flags): New define. * ihex.c (ihex_bfd_lookup_section_flags): New define. * libbfd-in.h (_bfd_nolink_bfd_lookup_section_flags): Declare. (bfd_generic_lookup_section_flags): Declare. * libbfd.h: Regenerated. * mach-o-target.c (bfd_mach_o_bfd_lookup_section_flags): New. * mmo.c (mmo_bfd_lookup_section_flags): New definition. * nlm-target.h (nlm_bfd_lookup_section_flags): New definition. * oasys.c (oasys_bfd_lookup_section_flags): New definition. * pef.c (bfd_pef_bfd_lookup_section_flags): New definition. * plugin.c (bfd_plugin_bfd_lookup_section_flags): New definition. * ppcboot.c (ppcboot_bfd_lookup_section_flags): New definition. * reloc.c (bfd_generic_lookup_section_flags): New function. * som.c (som_bfd_lookup_section_flags): New definition. * srec.c (srec_bfd_lookup_section_flags): New definition. * targets.c (flag_info): Declare. (NAME##_bfd_lookup_section_flags): Add to LINK jump table. (_bfd_lookup_section_flags): New. * tekhex.c (tekhex_bfd_lookup_section_flags): New definition. * versados.c (versados_bfd_lookup_section_flags): New definition. * vms-alpha.c (alpha_vms_bfd_lookup_section_flag): New definition. * xsym.c (bfd_sym_bfd_lookup_section_flags): New definition. ld/ChangeLog 2011-07-11 Catherine Moore <clm@codesourcery.com> * ld.h (section_flag_list): Add field to struct wildcard_spec. * ld.texinfo (INPUT_SECTION_FLAGS): Document. * ldgram.y (flag_info_list, flag_info): Add to union. (INPUT_SECTION_FLAGS): New token. (wildcard_spec): Initialize section_flag_list to NULL for each alternative. (sect_flag_list, sect_flags): New rules. (input_section_spec_no_keep): Add alternatives to recognize sect_flags. * ldlang.c (walk_wild_consider_section): Initialize section_flag_info field of the section struct. (lang_add_section): Check input section flags. (lang_add_wild): Initialize section_flag_list field of the statement struct. * ldlang.h (lang_input_statement_struct): Add section_flag_list field. (lang_wild_statement_struct): Likewise. * ldlex.l (INPUT_SECTION_FLAGS): New token. * mri.c (mri_draw_tree): Initialize section_flag_list to NULL. * NEWS: Announce INPUT_SECTION_FLAGS enhancement. ld/testsuite/ChangeLog 2011-07-11 Catherine Moore <clm@cm00re.com> * ld-scripts/section-flags-1.s: New. * ld-scripts/section-flags-1.t: New. * ld-scripts/section-flags-2.s: New. * ld-scripts/section-flags-2.t: New. * ld-scripts/section-flags.exp: New.
2011-06-092011-06-09 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-1/+2
* bfd.c (bfd_get_sign_extend_vma): Handle aixcoff.
2011-04-17 PR ld/12365Alan Modra1-2/+5
PR ld/12672 bfd/ * bfd.c (BFD_PLUGIN): Define. (BFD_FLAGS_SAVED, BFD_FLAGS_FOR_BFD_USE_MASK): Add BFD_PLUGIN. * bfd-in2.h: Regenerate. * elflink.c (elf_link_output_extsym): Strip undefined plugin syms. * opncls.c (bfd_make_readable): Don't lose original bfd flags. ld/ * ldfile.c (ldfile_try_open_bfd): Don't attempt any plugin action when no_more_claiming. * ldmain.c (add_archive_element): Likewise. (multiple_definition): Remove plugin_multiple_definition call. (notice): Remove plugin_notice call. * ldlang.c (lang_list_insert_after, void lang_list_remove_tail): Move. Delete prototype. (plugin_insert): New static var. (open_input_bfds): Only rescan libs after plugin insert point. (lang_gc_sections): Omit plugin claimed files. (lang_process): Set plugin_insert. Only rescan when plugin adds objects. * plugin.h (no_more_claiming): Declare. (plugin_notice, plugin_multiple_definition): Don't declare. * plugin.c: Formatting. (orig_notice_all, orig_allow_multiple_defs, orig_callbacks, plugin_callbacks): New static vars. (no_more_claiming): Make global. (plugin_cached_allow_multiple_defs): Delete. (plugin_get_ir_dummy_bfd): Set SEC_EXCLUDE on dummy .text section, use newer bfd_make_section variant. Make COMMON section too. Error handling. Correct setting of gp size. (asymbol_from_plugin_symbol): Properly cast last arg of concat. (message): Likewise for ACONCAT. (asymbol_from_plugin_symbol): Use our COMMON section. (get_symbols): When report_plugin_symbols, show visibility too. (init_non_ironly_hash): Move. Don't test non_ironly_hash. (plugin_load_plugins): Save state of linker callbacks, set up to call plugin_notice instead. Call init_non_ironly_hash here. (plugin_call_all_symbols_read): Set plugin_multiple_definition in plugin callbacks. (plugin_notice): Rewrite. (plugin_multiple_definition): Make static, call original callback. ld/testsuite/ * ld-plugin/plugin-7.d: Adjust for plugin changes. * ld-plugin/plugin-8.d: Likewise. * ld-plugin/plugin.exp: Pass --verbose=2 for visibility test, and compare ld output to.. * ld-plugin/plugin-12.d: New.
2011-01-14 * bfd.c (bfd_perror): Flush stdout before and stderr after printingAlan Modra1-1/+4
error. (_bfd_default_error_handler): Likewise. * elf.c (print_segment_map): Likewise. * libbfd.c (warn_deprecated): Likewise. * som.c (som_sizeof_headers): No need to do so here. * coff-i860.c: Replace use of printf for error messages with _bfd_error_handler. * coff-ppc.c: Likewise. * coff-sh.c: Likewise. * elf32-bfin.c: Likewise. * elf32-dlx.c: Likewise. * elf32-mep.c: Likewise. * elf32-v850.c: Likewise. * mach-o.c: Likewise. * pef.c: Likewise.
2010-11-03Don't display bits only used for BFD in abfd->flags.H.J. Lu1-0/+5
bfd/ 2010-11-02 H.J. Lu <hongjiu.lu@intel.com> * bfd.c (BFD_FLAGS_FOR_BFD_USE_MASK): New. * bfd-in2.h: Regenerated. binutils/ 2010-11-02 H.J. Lu <hongjiu.lu@intel.com> * objdump.c (dump_bfd_header): Don't display BFD_FLAGS_FOR_BFD_USE_MASK bits in abfd->flags.
2010-10-29Add compressed debug section support to binutils and ld.H.J. Lu1-1/+11
bfd/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> Cary Coutant <ccoutant@google.com> * archive.c (bfd_openr_next_archived_file): Copy BFD_COMPRESS and BFD_DECOMPRESS. * bfd.c (BFD_COMPRESS): New. (BFD_DECOMPRESS): Likewise. (BFD_FLAGS_SAVED): Likewise. (bfd_preserve_save): Replace BFD_IN_MEMORY with BFD_FLAGS_SAVED. * compress.c (bfd_uncompress_section_contents): Removed. (get_uncompressed_size): New. (decompress_contents): Likewise. (bfd_compress_section_contents): Likewise. (bfd_get_full_section_contents): Likewise. (bfd_is_section_compressed): Likewise. (bfd_init_section_decompress_status): Likewise. (bfd_init_section_compress_status): Likewise. * dwarf2.c (dwarf_debug_sections): New. (dwarf_debug_section_enum): Likewise. (read_section): Remove section_name and compressed_section_name. Add dwarf_debug_section_enum. Try compressed debug section. (read_indirect_string): Updated. (read_abbrevs): Likewise. (decode_line_info): Likewise. (read_debug_ranges): Likewise. (find_line): Updated. * ecoff.c (bfd_debug_section): Add compress_status and compressed_size. * elf.c (_bfd_elf_make_section_from_shdr): Call bfd_is_section_compressed to check if a DWARF debug section is compressed. Call bfd_init_section_compress_status or bfd_init_section_decompress_status if needed. * elflink.c (elf_link_input_bfd): Replace bfd_get_section_contents with bfd_get_full_section_contents. * merge.c (_bfd_add_merge_section): Likewise. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise. * simple.c (bfd_simple_get_relocated_section_contents): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Allow BFD_COMPRESS and BFD_DECOMPRESS. (TARGET_LITTLE_SYM): Likewise. * libbfd-in.h (dwarf_debug_section): New. (dwarf_debug_sections): Likewise. * libbfd.c (_bfd_generic_get_section_contents): Issue an error when getting contents on compressed/decompressed section. * section.c (COMPRESS_SECTION_NONE): New. (COMPRESS_SECTION_DONE): Likewise. (DECOMPRESS_SECTION_SIZED): Likewise. (BFD_FAKE_SECTION): Add compress_status and compressed_size. (bfd_malloc_and_get_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. binutils/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * addr2line.c (process_file): Set BFD_DECOMPRESS. * objcopy.c (do_debug_sections): New. (OPTION_COMPRESS_DEBUG_SECTIONS): New. (OPTION_DECOMPRESS_DEBUG_SECTIONS): Likewise. (copy_options): Add OPTION_COMPRESS_DEBUG_SECTIONS and OPTION_DECOMPRESS_DEBUG_SECTIONS. (copy_usage): Add --compress-debug-sections and --decompress-debug-sections. (copy_file): Set BFD_COMPRESS or BFD_DECOMPRESS. (copy_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. (copy_main): Handle OPTION_COMPRESS_DEBUG_SECTIONS and OPTION_DECOMPRESS_DEBUG_SECTIONS. Check do_debug_sections to rename DWARF debug sections. * objdump.c (load_specific_debug_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. Remove bfd_uncompress_section_contents. (dump_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. (display_file): Set BFD_DECOMPRESS if needed. * readelf.c (uncompress_section_contents): Set buffer to NULL to indiate decompression failure. (load_specific_debug_section): Always call uncompress_section_contents. * doc/binutils.texi: Document --compress-debug-sections and --decompress-debug-sections. binutils/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/compress.exp: New. * binutils-all/dw2-1.S: Likewise. * binutils-all/dw2-2.S: Likewise. * binutils-all/libdw2-compressed.out: Likewise. * binutils-all/libdw2.out: Likewise. gas/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * write.c (compress_debug): Optimize section flags check. gas/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * elf/dwarf2-1.s: Replace .zdebug_abbrev section with .debug_abbrev section. * elf/dwarf2-2.3: Likewise. * elf/dwarf2-1.d: Pass --compress-debug-sections to assembler. Updated. * elf/dwarf2-2.d: Likewise. * gas/i386/i386.exp: Remove xfail on dw2-compress-2 and x86-64-dw2-compress-2. ld/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * ldfile.c (ldfile_try_open_bfd): Set BFD_DECOMPRESS after bfd_openr returns. * emultempl/elf32.em (gld${EMULATION_NAME}_try_needed): Likewise. * scripttempl/elf.sc: Include compressed DWARF debug sections. ld/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * ld-elf/compress.exp: New. * ld-elf/compress1.s: Likewise. * ld-elf/compress1a.d: Likewise. * ld-elf/compress1b.d: Likewise. * ld-elf/compress1c.d: Likewise.
2010-04-012010-04-01 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-0/+4
* vms.h: Include time.h. Add prototypes for vms_get_module_name, vms_time_to_time_t and vms_rawtime_to_time_t. * vms.c (vms_alpha_vec): Add archives support. * vms-misc.c: Include safe-ctype.h (vms_get_module_name): New function. (vms_time_to_time_t, vms_rawtime_to_time_t): Ditto. * vms-hdr.c (_bfd_vms_write_hdr): Put module name creation to the vms_get_module_name function. Use this function. * targets.c: Declare vms_lib_txt_vec. Add it to _bfd_target_vector. * libbfd-in.h: Add prototype for _bfd_append_relative_path. Add prototypes for vms-lib.c * libbfd.h: Regenerate. * configure.in (TDEFINES): Add an entry for vms_lib_txt_vec. Add vms-lib.lo to vms_alpha_vec. * config.bfd (targ_cpu): Add targ_selvecs for alpha*-*-*vms*. * configure: Regenerate. * bfd.c: Add selective_search field. * bfd-in2.h: Regenerate. * archive.c (append_relative_path): Rename to _bfd_append_relative_path and make it public. (_bfd_get_elt_at_filepos): Adjust for above renaming. * Makefile.am (BFD32_BACKENDS): Add vms-lib.lo (BFD32_BACKENDS_CFILES): Add vms-lib.c * Makefile.in: Regenerate.
2009-09-09 Updated soruces in bfd/* to compile cleanly with -Wc++-compat.Nick Clifton1-13/+14
* bfd/aoutx.h: Add casts. * bfd/archive.c: Add casts. * bfd/archive64.c: Add casts. * bfd/archures.c: Add casts. * bfd/bfd-in2.h: Regenerated. * bfd/bfd.c: Add casts. (enum bfd_direction): Move out to top level. * bfd/bfdio.c: Add casts. * bfd/binary.c: Add casts. * bfd/cache.c (cache_bseek,cache_bread_1,cache_bwrite): Updated parameter to use enum value instead of int. * bfd/coffcode.h: Add casts. * bfd/coffgen.c: Add casts. * bfd/cofflink.c: Add casts. * bfd/compress.c: Add casts. * bfd/dwarf1.c: Add casts. * bfd/dwarf2.c: Add casts. (struct dwarf2_debug): Rename member bfd to bfd_ptr. Update code to use new name. * bfd/elf-attrs.c: Add casts. * bfd/elf-bfd.h (elf_link_virtual_table_entry): Gives name to anonymous struct. (union gotplt_union, struct elf_link_virtual_table_entry): Move to top level. * bfd/elf-eh-frame.c: Add casts. * bfd/elf-strtab.c: Add casts. * bfd/elf.c: Add casts. (_bfd_elm_make_Section_from_phdr): Change argument name from typename to type_name. * bfd/elf32-i386.c: Add casts. * bfd/elf64-x86-64.c: Add casts. * bfd/elfcode.h: Add casts. * bfd/elfcore.h: Add casts. * bfd/elflink.c: Add casts. * bfd/format.c: Add casts. * bfd/hash.c: Add casts. * bfd/ihex.c: Add casts. * bfd/libaout.h (enum aout_subformat, enum aout_magic): Move to top level. * bfd/libbfd.c: Add casts. * bfd/linker.c: Add casts. * bfd/merge.c: Add casts. * bfd/opncls.c: Add casts. * bfd/peXXigen.c: Add casts. * bfd/peicode.h: Add casts. * bfd/reloc.c: Add casts. * bfd/section.c: Add casts. * bfd/simple.c: Add casts. * bfd/srec.c: Add casts. * bfd/stabs.c: Add casts. * bfd/syms.c: Add casts. * bfd/targets.c: Add casts. * bfd/tekhex.c: Add casts. * bfd/verilog.c: Add casts. * include/bfdlink.h (struct bfd_link_hash_common_entry): Move to top level.
2009-08-30 PR ld/10569Alan Modra1-5/+2
* bfd.c (bfd_emul_get_maxpagesize): Don't abort. (bfd_emul_get_commonpagesize): Likewise.
2009-05-26 * Makefile.am: Run "make dep-am".Nick Clifton1-0/+1
(AM_CPPFLAGS): New. (LIBDL): New. (ALL_MACHINES): Add cpu-plugin.lo. (ALL_MACHINES_CFILES): Add cpu-plugin.c. (BFD32_BACKENDS): Add plugin.lo. (BFD32_BACKENDS_CFILES): Add plugin.c. (libbfd_la_LIBADD): Add LIBDL * archures.c (bfd_architecture): Add bfd_arch_plugin. (bfd_plugin_arch): Declare. * bfd-in.h (BFD_SUPPORTS_PLUGINS): New. * bfd.c (bfd): Add plugin_data. * config.bfd: Handle the plugin target. * configure.in: Check for --enable-plugins. (LT_INIT): Use the dlopen option. * cpu-plugin.c: New. * plugin.c: New. * plugin.h: New. * targets.c (plugin_vec): Declare. (_bfd_target_vector): Add plugin_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * ar.c: Include plugin.h. (main): Handle the --plugin option. * nm.c: Include plugin.h. (OPTION_PLUGIN): New. (long_options): Add plugin. (main): Handle OPTION_PLUGIN. * NEWS: Mention the new feature. * doc/binutils: Documement the new command line options. * configure.in: Check for --enable-plugins. * configure: Regenerate.
2009-04-27 * verilog.c: New file.Nick Clifton1-1/+2
* Makefile.am (BFD32_LIBS): Add verilog.c. (BFD32_LIBS_CFILES): Add verilog.c. (verilog.lo): New build rule. * Makefile.in: Rebuilt. * targets.c: Add verilog support. * bfd.c (tdata union): Add Verilog private data field. * bfd-in2.h: Regenerate. * bfdint.texi (BFD target vector miscellaneous): Mention verilog flavour. * NEWS: Mention verilog support added to bfd.
2009-03-11[bfd/ChangeLog]Chris Demetriou1-0/+5
2009-03-11 Chris Demetriou <cgd@google.com> * bfd.c (BFD_DETERMINISTIC_OUTPUT): New flag. * bfd-in2.h: Regenerate. * archive.c (bfd_ar_hdr_from_filesystem): If BFD_DETERMINISTIC_OUTPUT flag is set, use 0 for uid, gid, and timestamp, and use 0644 for file mode. (bsd_write_armap): Likewise. (_bfd_archive_bsd_update_armap_timestamp): If BFD_DETERMINISTIC_OUTPUT flag is set, do nothing. (coff_write_armap): If BFD_DETERMINISTIC_OUTPUT flag is set, use 0 for timestamp. [binutils/ChangeLog] 2009-03-11 Chris Demetriou <cgd@google.com> * ar.c (deterministic): New global variable. (main): Recognize new 'D' option, which enables 'deterministic mode'. (usage): Document new 'D' option. (write_archive): Set BFD_DETERMINISTIC_OUTPUT in output archive's flags if deterministic mode was requested. * doc/binutils.texi (ar): Document deterministic mode ('D' option). [binutils/testsuite/ChangeLog] 2009-03-11 Chris Demetriou <cgd@google.com> * binutils-all/ar.exp (deterministic_archive): New test.
2008-11-202008-11-20 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-3/+2
* bfd.c (is32bit): Use architecture information for non-ELF targets.
2008-11-122008-11-12 Tristan Gingold <gingold@adacore.com>Tristan Gingold1-0/+3
* bfd.c (bfd_get_sign_extend_vma): Return 0 for mach-o.
2008-08-17bfd/Alan Modra1-1/+2
* bfd.c (struct _bfd): Correct outsymbols comment. * bfd-in2.h: Regenerate. * linker.c (bfd_generic_link_read_symbols): Renamed from.. (generic_link_read_symbols): ..this, and made global. include/ * bfdlink.h (bfd_generic_link_read_symbols): Declare. ld/ PR 6478 * ldcref.c (check_local_sym_xref): Use bfd_generic_link_read_symbols. Don't free symbol pointer array. (check_refs): Likewise. * ldmain.c (warning_callback): Likewise. * ldmisc.c (vfinfo): Likewise. * pe-dll.c (process_def_file): Likewise. (pe_walk_relocs_of_symbol, generate_reloc): Likewise. * emultempl/pe.em (pe_find_data_imports): Likewise. (gld_${EMULATION_NAME}_after_open): Likewise. * emultempl/pep.em (pep_find_data_imports): Likewise. (gld_${EMULATION_NAME}_after_open): Likewise. * ldlang.h (lang_input_statement_type): Delete asymbols, symbol_count, passive_position, closed. * ldlang.c (new_afile): Don't set asymbols and symbol_count. * ldmain.c (add_archive_element): xcalloc lang_input_statement_type.
2008-07-07 * bfd.c (bfd_demangle): Always trim off bfd_get_symbol_leading_char.Alan Modra1-4/+17
2008-03-28Add support for thin archives.Nick Clifton1-0/+12
* bfd/archive.c (_bfd_find_nested_archive): New function. (get_extended_arelt_filename): Add origin parameter. (_bfd_generic_read_ar_hdr_mag): Deal with extended name combined with a file offset. (append_relative_path): New function. (_bfd_get_elt_at_filepos): Deal with external members and nested archives. (bfd_generic_openr_next_archived_file): Thin archives. (bfd_generic_archive_p): Recognize new magic string. (adjust_relative_path): New function. (_bfd_construct_extended_name_table): Construct extended names for thin archive members. (_bfd_write_archive_contents): Emit new magic string, skip copying files for thin archives. * bfd/bfd-in.h (bfd_is_thin_archive): New macro. * bfd/bfd.c (struct bfd): New fields for thin archives. * bfd/libbfd-in.h (struct areltdata): New field for thin archives. * bfd/opncls.c (bfd_close): Delete BFDs for nested archives. * binutils/ar.c (make_thin_archive): New global flag. (map_over_members): Deal with full pathnames in thin archives. (usage, main): Add 'T' option for building thin archives. (replace_members): Pass thin archive flag to ar_emul_append. * binutils/arsup.c (ar_open): Initialize new flag. * binutils/binemul.c (ar_emul_append): Add new parameter for flattening nested archives. (do_ar_emul_default_append): New function. (ar_emul_default_append): Factored out recursive code. * binutils/binemul.h (ar_emul_default_append): Add new parameter. (struct bin_emulation_xfer_struct): New parameter for ar_append. * binutils/dlltool.c (gen_lib_file): Initialize thin archive flag. * binutils/emul_aix.c (ar_emul_aix_internal): Add new flatten parameter, currently unimplemented. All callers changed. * binutils/objcopy.c (copy_archive): Preserve thin archive flag. * binutils/doc/binutils.texi: Update ar documentation. * binutils/testsuite/binutils-all/ar.exp: Add thin archive tests. * include/aout/ar.h (ARMAGT): New magic string for thin archives.
2008-03-162008-03-15 H.J. Lu <hongjiu.lu@intel.com>H.J. Lu1-24/+90
* bfd-in.h (BFD_NO_FLAGS, HAS_RELOC, EXEC_P, HAS_LINENO, HAS_DEBUG, HAS_SYMS, HAS_LOCALS, DYNAMIC, WP_TEXT, D_PAGED, BFD_IS_RELAXABLE, BFD_TRADITIONAL_FORMAT, BFD_IN_MEMORY, HAS_LOAD_PAGE, BFD_LINKER_CREATED): Moved to ... * bfd.c: Here. * bfd.c (bfd): Change cacheable, target_defaulted, opened_once, mtime_set, no_export, output_has_begun and has_armap to bit field. * bfd-in2.h: Regenerated.
2008-01-25Add mingw I64 support for printing long and long long valuesNick Clifton1-1/+3
2007-09-15 * bfd.c (_bfd_default_error_handler): fflush stdout.Alan Modra1-0/+3
2007-09-12 * elf-bfd.h (struct elf_backend_data): Delete elf_backend_sprintf_vmaAlan Modra1-17/+37
and elf_backend_fprintf_vma. (_bfd_elf_sprintf_vma, _bfd_elf_fprintf_vma): Delete. * elf.c (_bfd_elf_sprintf_vma, _bfd_elf_fprintf_vma): Delete. * elfxx-target.h (elf_backend_sprintf_vma): Don't define. (elf_backend_fprintf_vma): Likewise. (elfNN_bed): Don't init removed fields. * bfd.c (is32bit): New function. (bfd_sprintf_vma, bfd_fprintf_vma): Use the above.
2007-07-26 * bfd.c (_bfd_set_gp_value): Use abort instead of BFD_FAIL.Thiemo Seufer1-1/+1
2007-07-03Switch sources over to use the GPL version 3Nick Clifton1-2/+3
2007-06-29* bfd.c (bfd_demangle): Plug memory leak (Coverity).Nick Clifton1-6/+6
2007-06-27bfd/Alan Modra1-1/+1
* bfd.c (struct bfd): Rename "next" to "archive_next". * archive.c: Rename uses throughout file. * archive64.c: Likewise. * coff-rs6000.c: Likewise. * ecoff.c: Likewise. * som.c: Likewise. * bfd-in2.h: Regenerate. binutils/ * ar.c: Rename uses of bfd.next to bfd.archive_next throughout. * arsup.c: Likewise. * binemul.c: Likewise. * objcopy.c: Likewise. * dlltool.c: Likewise. ld/ * pe-dll.c: Rename uses of bfd.next to bfd.archive_next throughout.
2007-04-26bfd/Alan Modra1-2/+2
Many files: Include sysdep.h before bfd.h. * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. binutils/ * bucumm.h: Split off host dependencies to.. * sysdep.h: ..here. Many files: Include sysdep.h. Remove duplicate headers and reorder. * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. ld/ Many files: Include sysdep.h first. Remove duplicate headers. * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. opcodes/ * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. * ns32k-dis.c: Include sysdep.h first.
2007-04-19missed from last commitAlan Modra1-1/+84
generated by cgit v1.1 at 2024-12-29 15:36:13 +0000