aboutsummaryrefslogtreecommitdiff
path: root/bfd/archures.c
AgeCommit message (Collapse)AuthorFilesLines
2019-09-18Constify bfd_octets_per_byte and related functionsAlan Modra1-10/+10
* archures.c (bfd_get_arch): Make param const. (bfd_get_mach, bfd_arch_bits_per_byte): Likewise. (bfd_arch_bits_per_address, bfd_octets_per_byte): Likewise. * bfd-in2.h: Regenerate.
2019-09-10Enhance the disassembler so that it will reliably determine whether a reloc ↵Nick Clifton1-2/+13
applies to the middle of the next insn. PR 24907 binutils* objdump.c (null_print): New function. (disassemble_bytes): Delete previous_octets local and replace with a test of the max_reloc_offset_into_insn field of the bfd_arch_info structure. If a reloc is a potential match for the next insn, then perform a dummy disassembly in order to calculate its real length. bfd * archures.c (bfd_arch_info_type): Add max_reloc_offset_into_insn field. (bfd_default_arch_struct): Initialise the new field. * bfd-in2.h: Regenerate. * cpu-aarch64.c: Initialise the new field. * cpu-alpha.c: Likewise. * cpu-arc.c: Likewise. * cpu-arm.c: Likewise. * cpu-avr.c: Likewise. * cpu-bfin.c: Likewise. * cpu-bpf.c: Likewise. * cpu-cr16.c: Likewise. * cpu-cr16c.c: Likewise. * cpu-cris.c: Likewise. * cpu-crx.c: Likewise. * cpu-csky.c: Likewise. * cpu-d10v.c: Likewise. * cpu-d30v.c: Likewise. * cpu-dlx.c: Likewise. * cpu-epiphany.c: Likewise. * cpu-fr30.c: Likewise. * cpu-frv.c: Likewise. * cpu-ft32.c: Likewise. * cpu-h8300.c: Likewise. * cpu-hppa.c: Likewise. * cpu-i386.c: Likewise. * cpu-ia64.c: Likewise. * cpu-iamcu.c: Likewise. * cpu-ip2k.c: Likewise. * cpu-iq2000.c: Likewise. * cpu-k1om.c: Likewise. * cpu-l1om.c: Likewise. * cpu-lm32.c: Likewise. * cpu-m10200.c: Likewise. * cpu-m10300.c: Likewise. * cpu-m32c.c: Likewise. * cpu-m32r.c: Likewise. * cpu-m68hc11.c: Likewise. * cpu-m68hc12.c: Likewise. * cpu-m68k.c: Likewise. * cpu-m9s12x.c: Likewise. * cpu-m9s12xg.c: Likewise. * cpu-mcore.c: Likewise. * cpu-mep.c: Likewise. * cpu-metag.c: Likewise. * cpu-microblaze.c: Likewise. * cpu-mips.c: Likewise. * cpu-mmix.c: Likewise. * cpu-moxie.c: Likewise. * cpu-msp430.c: Likewise. * cpu-mt.c: Likewise. * cpu-nds32.c: Likewise. * cpu-nfp.c: Likewise. * cpu-nios2.c: Likewise. * cpu-ns32k.c: Likewise. * cpu-or1k.c: Likewise. * cpu-pdp11.c: Likewise. * cpu-pj.c: Likewise. * cpu-plugin.c: Likewise. * cpu-powerpc.c: Likewise. * cpu-pru.c: Likewise. * cpu-riscv.c: Likewise. * cpu-rl78.c: Likewise. * cpu-rs6000.c: Likewise. * cpu-rx.c: Likewise. * cpu-s12z.c: Likewise. * cpu-s390.c: Likewise. * cpu-score.c: Likewise. * cpu-sh.c: Likewise. * cpu-sparc.c: Likewise. * cpu-spu.c: Likewise. * cpu-tic30.c: Likewise. * cpu-tic4x.c: Likewise. * cpu-tic54x.c: Likewise. * cpu-tic6x.c: Likewise. * cpu-tic80.c: Likewise. * cpu-tilegx.c: Likewise. * cpu-tilepro.c: Likewise. * cpu-v850.c: Likewise. * cpu-v850_rh850.c: Likewise. * cpu-vax.c: Likewise. * cpu-visium.c: Likewise. * cpu-wasm32.c: Likewise. * cpu-xc16x.c: Likewise. * cpu-xgate.c: Likewise. * cpu-xstormy16.c: Likewise. * cpu-xtensa.c: Likewise. * cpu-z80.c: Likewise. * cpu-z8k.c: Likewise. gas * testsuite/gas/arm/pr24907.s: New test. * testsuite/gas/arm/pr24907.d: Expected disassembly.
2019-05-23bfd: add support for eBPFJose E. Marchesi1-0/+4
This patch adds support to BFD for elf64-bpf, in both little-endian and big-endian variants. bfd/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Add bpf_elf64_le_vec and bpf_elf64_be_vec. * configure: Regenerated. * Makefile.am (ALL_MACHINES): Add cpu-bpf.lo. (ALL_MACHINES_CFILES): Add cpu-bpf.c. (BFD64_BACKENDS): Add elf64-bpf.lo. (BFD64_BACKENDS_CFILES): Add elf64-bpf.c. * Makefile.in (SOURCE_HFILES): Regenerate. * config.bfd (targ_cpu): Handle bpf-*-* targets. * cpu-bpf.c: New file. * elf64-bpf.c: Likewise. * targets.c (_bfd_target_vector): Add bpf_elf64_be_vec and bpf_elf64_le_vec. * archures.c: Define architecture bfd_arch_bpf and machine bfd_arch_bpf. * reloc.c: Define BFD relocations used by the BPF target. * bfd-in2.h: Regenerated. * libbfd.h: Likewise.
2019-04-15[binutils, ARM, 1/16] Add support for Armv8.1-M Mainline CLIAndre Vieira1-0/+1
The patch is straightforward, it does the following: - support the new Tag_CPU_arch build attribute value, ie.: + declare the new value + update all the asserts forcing logic to be reviewed for new architectures + create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and add mapping from Tag_CPU_arch to it + teach readelf about new Tag_CPU_arch value - declare armv8.1-m.main as a supported architecture value - define Armv8.1-M Mainline in terms of feature bits available - tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature bits available - update architecture-specific logic in gas and bfd guarded by the asserts mentioned above. - tests for all the above ChangeLog entries are as follows: *** bfd/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * archures.c (bfd_mach_arm_8_1M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline. * elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline and update assert. (using_thumb2): Likewise. (using_thumb2_bl): Update assert. (arch_has_arm_nop): Likewise. (bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline. (tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging. *** binutils/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline. *** gas/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline Tag_CPU_arch build attribute value. Reindent. (get_aeabi_cpu_arch_from_fset): Update assert. (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. *** include/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro. (MAX_TAG_CPU_ARCH): Set value to above macro. * opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro. (ARM_AEXT_V8_1M_MAIN): Likewise. (ARM_AEXT2_V8_1M_MAIN): Likewise. (ARM_ARCH_V8_1M_MAIN): Likewise. *** ld/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * testsuite/ld-arm/attr-merge-13.attr: New test. * testsuite/ld-arm/attr-merge-13a.s: New test. * testsuite/ld-arm/attr-merge-13b.s: New test. *** opcodes/ChangeLog *** 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> * arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
2019-01-05RX: bfd - Add RXv3 support.Yoshinori Sato1-0/+2
* bfd/archures.c: Add bfd_mach_rx_v2 and bfd_mach_rx_v3. * bfd/bfd-in2.h: Regenerate. * bfd/cpu-rx.c (arch_info_struct): Add RXv2 and RXv3 entry. * bfd/elf32-rx.c (elf32_rx_machine): Add RXv2 and RXv3 support.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-08-31Allow an IR object with unknown architectureH.J. Lu1-3/+4
An IR object may have an unknown architecture. But it is compatible with other architecture. PR ld/23600 * archures.c (bfd_arch_get_compatible): Allow an IR object with unknown architecture.
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu1-1/+1
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+11
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-02[ARM] Update bfd's Tag_CPU_arch knowledgeThomas Preud'homme1-0/+13
BFD's bfd_get_mach () function returns a bfd specific value representing the architecture of the target which is populated from the Tag_CPU_arch build attribute value of that target. Among other users of that interfacem, objdump which uses it to print the architecture version of the binary being examinated and to decide what instruction is available if run with "-m arm" via its own mapping from bfd_mach_arm_X values to feature bits available. However, both BFD and objdump's most recent known architecture is Armv5TE. When encountering a newer architecture bfd_get_mach will return bfd_mach_arm_unknown. This is unfortunate since objdump uses that value to allow all instructions on all architectures which is already what it does by default, making the "-m arm" trick useless. This patch updates BFD and objdump's knowledge of Arm architecture versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A) share the same Tag_CPU_arch build attribute value and bfd_mach_arm values, the mapping from bfd machine value to feature bits need to return the most featureful feature bits that would yield the given bfd machine value otherwise some instruction would not disassemble under "-m arm" mode. The patch rework that mapping to make this clearer and simplify writing the mapping rules. In particular, for simplicity all FPU instructions are allowed in all cases. Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the TAG_CPU_ARCH_X macros rather than hardcode their value. 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ, bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M, bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R, bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define. * bfd-in2.h: Regenerate. * cpu-arm.c (arch_info_struct): Add entries for above new bfd_mach_arm values. * elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later architectures. Force assert failure for any new Tag_CPU_arch value. gas/ * config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros rather than hardcode their values. ld/ * arm-dis.c (select_arm_features): Fix typo in heading comment. Allow all FPU features and add mapping from new bfd_mach_arm values to allowed CPU feature bits. opcodes/ * testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in expected result. * testsuite/ld-arm/tls-descrelax-v7.d: Likewise. * testsuite/ld-arm/tls-longplt-lib.d: Likewise. * testsuite/ld-arm/tls-longplt.d: Likewise.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+4
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron1-0/+5
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-1/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove w65 supportAlan Modra1-3/+0
include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove we32k supportAlan Modra1-7/+0
include/ * coff/we32k.h: Delete. bfd/ * Makefile.am: Remove we32k support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-we32k.c: Delete. * cpu-we32k.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * configure.ac: Remove we32k support. * configure: Regenerate. bintuils/ * testsuite/binutils-all/objdump.exp: Remove we32k support.
2018-04-16Remove m88k supportAlan Modra1-3/+0
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra1-3/+0
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra1-3/+0
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove IEEE 695 object supportAlan Modra1-13/+0
include/ * ieee.h: Delete. bfd/ * Makefile.am: Remove IEEE 695 support. * archures.c: Likewise. * bfd.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * doc/bfdsumm.texi: Likewise. * section.c: Likewise. * targets.c: Likewise. * ieee.c: Delete. * libieee.h: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * Makefile.am: Remove IEEE 695 support. * budbg.h: Likewise. * doc/binutils.texi: Likewise. * makefile.vms: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. * rddbg.c: Likewise. * ieee.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/ * app.c: Remove IEEE 695 support. * symbols.c: Likewise. ld/ * ld.texinfo: Remove IEEE 695 support. * mri.c: Likewise.
2018-04-16Remove tahoe supportAlan Modra1-1/+0
include/ * opcode/tahoe.h: Delete. bfd/ * archures.c: Remove tahoe support. * config.bfd: Likewise. * configure.ac: Likewise. * hosts/tahoe.h: Delete. * bfd-in2.h: Regenerate. * configure: Regenerate. opcodes/ * configure.ac: Remove tahoe support. * configure: Regenerate. binutils/ * testsuite/binutils-all/objdump.exp: Remove tahoe support. gprof/ * Makefile.am: Remove tahoe support. * corefile.c: Likewise. * tahoe.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-24/+1
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-02-16Remove bfd stub function casts.Alan Modra1-0/+8
This patch defines a bunch of new functions to use in the BFD target structs rather than casting bfd_false or bfd_true and similar stub functions. I've also renamed the stub functions to reflect their parameters and put "error" in the name if they set bfd_error. The latter change is important since there were quite a few uses of bfd_false where setting bfd_error was inappropriate, for example in elf_backend_allow_non_load_phdr and is_target_special_symbol. * libbfd.c (_bfd_bool_bfd_false_error): Rename from bfd_false. (_bfd_bool_bfd_true): Rename from bfd_true. (_bfd_ptr_bfd_null_error): Rename from bfd_nullvoidptr. (_bfd_int_bfd_0): Rename from bfd_0. (_bfd_uint_bfd_0): Rename from bfd_0u. (_bfd_long_bfd_0): Rename from bfd_0l. (_bfd_long_bfd_n1_error): Rename from _bfd_n1. (_bfd_void_bfd): Rename from bfd_void. (_bfd_bool_bfd_false, _bfd_bool_bfd_asymbol_false), (_bfd_bool_bfd_link_false_error), (_bfd_bool_bfd_link_true, _bfd_bool_bfd_bfd_true), (_bfd_bool_bfd_uint_true, _bfd_bool_bfd_ptr_true), (_bfd_bool_bfd_asection_bfd_asection_true), (_bfd_bool_bfd_asymbol_bfd_asymbol_true), (_bfd_void_bfd_link, _bfd_void_bfd_asection): New functions. * archive.c (_bfd_noarchive_get_elt_at_index), (_bfd_noarchive_openr_next_archived_file), (_bfd_noarchive_construct_extended_name_table), (_bfd_noarchive_write_ar_hdr, _bfd_noarchive_truncate_arname), (_bfd_noarchive_write_armap): New functions. * archures.c (_bfd_nowrite_set_arch_mach): New function. * coff-alpha.c (alpha_ecoff_swap_coff_aux_in), (alpha_ecoff_swap_coff_sym_in, alpha_ecoff_swap_coff_lineno_in), (alpha_ecoff_swap_coff_aux_out, alpha_ecoff_swap_coff_sym_out), (alpha_ecoff_swap_coff_lineno_out), (alpha_ecoff_swap_coff_reloc_out): New functions. * coff-mips.c (mips_ecoff_swap_coff_aux_in), (mips_ecoff_swap_coff_sym_in, mips_ecoff_swap_coff_lineno_in), (mips_ecoff_swap_coff_aux_out, mips_ecoff_swap_coff_sym_out), (mips_ecoff_swap_coff_lineno_out), (mips_ecoff_swap_coff_reloc_out): New functions. * coffcode.h (coff_set_alignment_hook): Replace define with new function. (symname_in_debug_hook): Likewise. * ecoff.c (_bfd_ecoff_set_alignment_hook): New function. * elfxx-target.h (elf_backend_allow_non_load_phdr): Default to 0. * elf.c (assign_file_positions_except_relocs): Test elf_backend_allow_non_load_phdr for NULL. * elflink.c (_bfd_elf_omit_section_dynsym_default): Rename from _bfd_elf_link_omit_section_dynsym. Update uses. (_bfd_elf_omit_section_dynsym_all): New function. * elf-bfd.h (_bfd_elf_link_omit_section_dynsym): Delete. (_bfd_elf_omit_section_dynsym_default): Declare. (_bfd_elf_omit_section_dynsym_all): Declare. * linker.c (_bfd_nolink_sizeof_headers, _bfd_nolink_bfd_relax_section), (_bfd_nolink_bfd_get_relocated_section_contents), (_bfd_nolink_bfd_lookup_section_flags), (_bfd_nolink_bfd_is_group_section, _bfd_nolink_bfd_discard_group), (_bfd_nolink_bfd_link_hash_table_create), (_bfd_nolink_bfd_link_just_syms), (_bfd_nolink_bfd_copy_link_hash_symbol_type), (_bfd_nolink_bfd_link_split_section), (_bfd_nolink_section_already_linked), (_bfd_nolink_bfd_define_common_symbol), (_bfd_nolink_bfd_define_start_stop): New functions. * reloc.c (_bfd_norelocs_bfd_reloc_type_lookup), (_bfd_norelocs_bfd_reloc_name_lookup), (_bfd_nodynamic_canonicalize_dynamic_reloc): New functions. * section.c (_bfd_nowrite_set_section_contents): New function. * syms.c (_bfd_nosymbols_canonicalize_symtab), (_bfd_nosymbols_print_symbol, _bfd_nosymbols_get_symbol_info), (_bfd_nosymbols_get_symbol_version_string), (_bfd_nosymbols_bfd_is_local_label_name), (_bfd_nosymbols_get_lineno, _bfd_nosymbols_find_nearest_line), (_bfd_nosymbols_find_line, _bfd_nosymbols_find_inliner_info), (_bfd_nosymbols_bfd_make_debug_symbol), ( _bfd_nosymbols_read_minisymbols), ( _bfd_nosymbols_minisymbol_to_symbol), (_bfd_nodynamic_get_synthetic_symtab): New functions. * libbfd-in.h: Declare new functions. Update existing defines, removing casts. * aix386-core.c: Update to use new hooks. Formatting. * aout-adobe.c: Likewise. * aout-arm.c: Likewise. * aout-target.h: Likewise. * aout-tic30.c: Likewise. * aoutf1.h: Likewise. * binary.c: Likewise. * bout.c: Likewise. * cisco-core.c: Likewise. * coff-alpha.c: Likewise. * coff-i386.c: Likewise. * coff-i860.c: Likewise. * coff-i960.c: Likewise. * coff-ia64.c: Likewise. * coff-mips.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic30.c: Likewise. * coff-tic54x.c: Likewise. * coff-x86_64.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * elf-m10300.c: Likewise. * elf32-cr16.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32r.c: Likewise. * elf32-metag.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-xstormy16.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-sh64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-target.h: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.h: Likewise. * hp300hpux.c: Likewise. * hppabsd-core.c: Likewise. * hpux-core.c: Likewise. * i386msdos.c: Likewise. * i386os9k.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * irix-core.c: Likewise. * libaout.h: Likewise. * libecoff.h: Likewise. * mach-o-target.c: Likewise. * mach-o.c: Likewise. * mipsbsd.c: Likewise. * mmo.c: Likewise. * netbsd-core.c: Likewise. * nlm-target.h: Likewise. * oasys.c: Likewise. * osf-core.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * pe-x86_64.c: Likewise. * pef.c: Likewise. * plugin.c: Likewise. * ppcboot.c: Likewise. * ptrace-core.c: Likewise. * sco5-core.c: Likewise. * som.c: Likewise. * sparclynx.c: Likewise. * srec.c: Likewise. * tekhex.c: Likewise. * trad-core.c: Likewise. * verilog.c: Likewise. * versados.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * wasm-module.c: Likewise. * xsym.c: Likewise. * libbfd.h: Regenerate.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-06BFD whitespace fixesAlan Modra1-269/+269
Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
2017-11-01FT32B is a new FT32 family member. It has a code compression scheme, which ↵James Bowman1-0/+1
requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 2 adds a relaxation pass, which actually implements the code compression scheme. bfd * archures.c: Add bfd_mach_ft32b. * cpu-ft32.c: Add arch_info_struct. * elf32-ft32.c: Add R_FT32_RELAX, SC0, SC1, DIFF32. (ft32_elf_relocate_section): Add clauses for R_FT32_SC0, SC1, DIFF32. (ft32_reloc_shortable, elf32_ft32_is_diff_reloc, elf32_ft32_adjust_diff_reloc_value, elf32_ft32_adjust_reloc_if_spans_insn, elf32_ft32_relax_delete_bytes, elf32_ft32_relax_is_branch_target, ft32_elf_relax_section): New function. * reloc.c: Add BFD_RELOC_FT32_RELAX, SC0, SC1, DIFF32. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-ft32.c (md_assemble): add relaxation reloc BFD_RELOC_FT32_RELAX. (md_longopts): Add "norelax" and "no-relax". (md_apply_fix): Add reloc BFD_RELOC_FT32_DIFF32. (relaxable_section, ft32_validate_fix_sub, ft32_force_relocation, ft32_allow_local_subtract): New function. * config/tc-ft32.h: remove unused MD_PCREL_FROM_SECTION. * testsuite/gas/ft32/insnsc.s: New test exercising all FT32B shortcodes. include * elf/ft32.h: Add R_FT32_RELAX, SC0, SC1, DIFF32.
2017-06-28MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor supportMaciej W. Rozycki1-0/+1
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.
2017-05-19binutils: support for the SPARC M8 processorJose E. Marchesi1-2/+5
This patch adds support for the new SPARC M8 processor (implementing OSA 2017) to binutils. New instructions: - Dictionary Unpack + dictunpack - Partitioned Compare with shifted result + Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl + Unsigned variants: fpcmpu{le,gt}{8,16,32}shl - Partitioned Dual-Equal compared, with shifted result + fpcmpde{8,16,32}shl - Partitioned Unsigned Range Compare, with shifted result + fpcmpur{8,16,32}shl - 64-bit shifts on Floating-Point registers + fps{ll,ra,rl}64x - Misaligned loads and stores + ldm{sh,uh,sw,uw,x,ux} + ldm{sh,uh,sw,uw,x,ux}a + ldmf{s,d} + ldmf{s,d}a + stm{h,w,x} + stm{h,w,x}a + stmf{s,d} + stmf{s,d}a - Oracle Numbers + on{add,sub,mul,div} - Reverse Bytes/Bits + revbitsb + revbytes{h,w,x} - Run-Length instructions + rle_burst + rle_length - New crypto instructions + sha3 - Instruction to read the new register %entropy + rd %entropy New Alternate Address Identifiers: - 0x24, #ASI_CORE_COMMIT_COUNT - 0x24, #ASI_CORE_SELECT_COUNT - 0x48, #ASI_ARF_ECC_REG - 0x53, #ASI_ITLB_PROBE - 0x58, #ASI_DSFAR - 0x5a, #ASI_DTLB_PROBE_PRIMARY - 0x5b, #ASI_DTLB_PROBE_REAL - 0x64, #ASI_CORE_SELECT_COMMIT_NHT The new assembler command-line options for selecting the M8 architecture are: -Av9m8 or -Asparc6 for 64-bit binaries. -Av8plusm8 for 32-bit (v8+) binaries. The corresponding disassembler command-line options are: -msparc:v9m8 for 64-bit binaries. -msparc:v8plusm8 for 32-bit (v8+) binaries. Tested for regressions in the following targets: sparc-aout sparc-linux sparc-vxworks sparc64-linux bfd/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v9m8): Define. (bfd_mach_sparc_v8plusm8): Likewise. (bfd_mach_sparc_v9_p): Adjust to M8. (bfd_mach_sparc_64bit_p): Likewise. * aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and bfd_mach_sparc_v8plusm8. * bfd-in2.h: Regenerated. * cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and sparc:v8plusm8. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and SHA3. * elf32-sparc.c (elf32_sparc_final_write_processing): Handle bfd_mach_sparc_v8plusm8. binutils/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * NEWS: Mention the SPARC M8 support. gas/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_arch_table): Entries for `sparc6', `v9m8' and `v8plusm8'. (sparc_md_end): Handle SPARC_OPCODE_ARCH_M8. (get_hwcap_name): Support the M8 hardware capabilities. (sparc_ip): Handle new operand types. * doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and -Asparc6, and the corresponding -xarch aliases. * testsuite/gas/sparc/sparc6.s: New file. * testsuite/gas/sparc/sparc6.d: Likewise. * testsuite/gas/sparc/sparc6-diag.s: Likewise. * testsuite/gas/sparc/sparc6-diag.l: Likewise. * testsuite/gas/sparc/fpcmpshl.s: Likewise. * testsuite/gas/sparc/fpcmpshl.d: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.s: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.l: Likewise. * testsuite/gas/sparc/ldm-stm.s: Likewise. * testsuite/gas/sparc/ldm-stm.d: Likewise. * testsuite/gas/sparc/ldm-stm-diag.s: Likewise. * testsuite/gas/sparc/ldm-stm-diag.l: Likewise. * testsuite/gas/sparc/ldmf-stmf.s: Likewise. * testsuite/gas/sparc/ldmf-stmf.d: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise. * testsuite/gas/sparc/on.s: Likewise. * testsuite/gas/sparc/on.d: Likewise. * testsuite/gas/sparc/on-diag.s: Likewise. * testsuite/gas/sparc/on-diag.l: Likewise. * testsuite/gas/sparc/rle.s: Likewise. * testsuite/gas/sparc/rle.d: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests. * testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY. * testsuite/gas/sparc/rdasr.d: Likewise. include/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define. (ELF_SPARC_HWCAP2_ONADDSUB): Likewise. (ELF_SPARC_HWCAP2_ONMUL): Likewise. (ELF_SPARC_HWCAP2_ONDIV): Likewise. (ELF_SPARC_HWCAP2_DICTUNP): Likewise. (ELF_SPARC_HWCAP2_FPCMPSHL): Likewise. (ELF_SPARC_HWCAP2_RLE): Likewise. (ELF_SPARC_HWCAP2_SHA3): Likewise. * opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8 and adjust SPARC_OPCODE_ARCH_MAX. (HWCAP2_SPARC6): Define. (HWCAP2_ONADDSUB): Likewise. (HWCAP2_ONMUL): Likewise. (HWCAP2_ONDIV): Likewise. (HWCAP2_DICTUNP): Likewise. (HWCAP2_FPCMPSHL): Likewise. (HWCAP2_RLE): Likewise. (HWCAP2_SHA3): Likewise. (OPM): Likewise. (OPMI): Likewise. (ONFCN): Likewise. (REVFCN): Likewise. (SIMM10): Likewise. opcodes/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8. (X_IMM2): Define. (compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8. (print_insn_sparc): Handle new operand types. * sparc-opc.c (MASK_M8): Define. (v6): Add MASK_M8. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Likewise. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (v9andleon): Likewise. (m8): Define. (HWS_VM8): Define. (HWS2_VM8): Likewise. (sparc_opcode_archs): Add entry for "m8". (sparc_opcodes): Add OSA2017 and M8 instructions dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl, fpx{ll,ra,rl}64x, ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d}, ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb, revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x}, stm{h,w,x}a, stmf{s,d}, stmf{s,d}a. (asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT, ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR, ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL, ASI_CORE_SELECT_COMMIT_NHT.
2017-03-27Add minimal support for WebAssembly backend to the BFD library.Pip Cet1-0/+4
include * elf/wasm32.h: New file to support wasm32 architecture. bfd * cpu-wasm32.c: New file to support wasm32 architecture. * elf32-wasm32.c: New file to support wasm32 architecture. * Makefile.am: Add wasm32 architecture. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-31PRU BFD supportDimitar Dimitrov1-0/+4
include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-11-01Add support for RISC-V architecture.Nick Clifton1-1/+6
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-07-16Don't include libbfd.h outside of bfd, part 2Alan Modra1-1/+1
Make bfd_default_set_arch_mach available to a bunch of gas backend files. bfd/ * archures.c (bfd_default_set_arch_mach): Make available in bfd.h. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-epiphany.c: Don't include libbfd.h. * config/tc-frv.c: Likewise. * config/tc-ip2k.c: Likewise. * config/tc-iq2000.c: Likewise. * config/tc-m32c.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-mt.c: Likewise. * config/tc-nios2.c: Likewise.
2016-06-21Arc assembler: Convert nps400 from a machine type to an extension.Graham Markall1-1/+0
gas * config/tc-arc.c (check_cpu_feature, md_parse_option): Add nps400 option and feature. Add check for nps400 feature. Refactor existing checks to check subclass before feature enablement. (md_show_usage): Document flags for NPS-400 and add some other undocumented flags. (cpu_type): Remove nps400 CPU type entry (check_zol): Remove bfd_mach_arc_nps400 case. (md_show_usage): Add help on -mcpu=nps400. (cpu_types): Add entry for nps400 as arc700 plus nps400 extension set. * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and -fpuda flags. Document -mcpu=nps400. * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change expected flags to match ARC700 instead of NPS400. * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. * testsuite/gas/arc/nps-400-2.d: Likewise. * testsuite/gas/arc/nps-400-3.d: Likewise. * testsuite/gas/arc/nps-400-4.d: Likewise. * testsuite/gas/arc/nps-400-5.d: Likewise. * testsuite/gas/arc/nps-400-6.d: Likewise. * testsuite/gas/arc/nps-400-7.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to avoid clash with cbba instruction. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400 case. ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400. * testsuite/ld-arc/nps-1b.d: Likewise. include * opcode/arc.h: Add nps400 extension and instruction subclass. Remove ARC_OPCODE_NPS400 * elf/arc.h: Remove E_ARC_MACH_NPS400 opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length. Use same method for determining instruction length on ARC700 and NPS-400. (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions with the NPS400 subclass. * arc-opc.c: Likewise. bfd * archures.c: Remove bfd_mach_arc_nps400. * bfd-in2.h: Likewise. * cpu-arc.c (arch_info_struct): Likewise. * elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing): Likewise.
2016-06-17bfd,opcodes: sparc: new opcode v9{c,d,e,v,m} architectures and bfd machine ↵Jose E. Marchesi1-2/+18
numbers. This patch adds support for the opcode architectures SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}. Note that for arches up to v9b (UltraSPARC III), the detection of the BFD machine type was based on the bits in the e_machine field of the ELF header. However, there are no more available bits in that field, so this patch takes the approach of using the hardware capabilities stored in the object attributes HWCAPS/HWCAPS2 in order to characterize the machine the object was built for. bfd/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v8plusc): Define. (bfd_mach_sparc_v9c): Likewise. (bfd_mach_sparc_v8plusd): Likewise. (bfd_mach_sparc_v9d): Likewise. (bfd_mach_sparc_v8pluse): Likewise. (bfd_mach_sparc_v9e): Likewise. (bfd_mach_sparc_v8plusv): Likewise (bfd_mach_sparc_v9v): Likewise. (bfd_mach_sparc_v8plusm): Likewise. (bfd_mach_sparc_v9m): Likewise. (bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m. (bfd_mach_sparc_64bit_p): Likewise. * bfd-in2.h: Regenerate. * cpu-sparc.c (arch_info_struct): Add entries for bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * elf32-sparc.c (elf32_sparc_final_write_processing): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise. include/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/sparc.h (enum sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D, SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and SPARC_OPCODE_ARCH_V9M. opcodes/ChangeLog: 2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}. (compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}. * sparc-opc.c (MASK_V9C): Define. (MASK_V9D): Likewise. (MASK_V9E): Likewise. (MASK_V9V): Likewise. (MASK_V9M): Likewise. (v6): Add MASK_V9{C,D,E,V,M}. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9andleon): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Define. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
2016-03-21arc: Add nps400 machine type, and assembler flag.Andrew Burgess1-0/+1
This commit introduces the nps400 machine type as a variant of arc. There's a new flag in the assembler to select this machine type. All other changes are just adding handling of the new machine type into the relevant places. The nps400 is an arc700 variant with some vendor specific instructions added into the instruction set. This commit does not add any of the new instructions, this is just laying the groundwork for future commits. However, in preparation for these new instructions a new opcode define for nps400 has been added to include/opcode/arc.h, this new opcode define is used in the assembler and disassembler along with the existing define for arc700 such that when assembling and disassembling for nps400 the user will have access to all arc700 instructions and all the nps400 vendor extension instructions. bfd/ChangeLog: * archures.c (bfd_mach_arc_nps400): Define. * bfd-in2.h: Regenerate. * cpu-arc.c (arch_info_struct): New entry for nps400, renumber some existing entries to make space. * elf32-arc.c (arc_elf_object_p): Add nps400 case. (arc_elf_final_write_processing): Likewise. binutils/ChangeLog: * readelf.c (decode_ARC_machine_flags): Handle nps400. gas/ChangeLog: * config/tc-arc.c (cpu_types): Add nps400 entry. (check_zol): Handle nps400. include/ChangeLog: * elf/arc.h (E_ARC_MACH_NPS400): Define. * opcode/arc.h (ARC_OPCODE_NPS400): Define. opcodes/ChangeLog: * arc-dis.c (print_insn_arc): Handle nps400.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-10-07New ARC implementation.Nick Clifton1-4/+6
bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*. * emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.
2015-07-01Add Nios II arch flags and compatibility testsSandra Loosemore1-2/+4
2015-07-01 Sandra Loosemore <sandra@codesourcery.com> Cesar Philippidis <cesar@codesourcery.com> bfd/ * archures.c (bfd_mach_nios2r1, bfd_mach_nios2r2): New. * bfd-in2.h: Regenerated. * cpu-nios2.c (nios2_compatible): New. (N): Use nios2_compatible instead of bfd_default_compatible. (NIOS2R1_NEXT, NIOS2R2_NEXT): Define. (arch_info_struct): New. (bfd_nios2_arch): Chain to NIOS2R1_NEXT. * elf32-nios2.c (is_nios2_elf): New. (nios2_elf32_merge_private_bfd_data): New. (nios2_elf32_object_p): New. (bfd_elf32_bfd_merge_private_bfd_data): Define. (elf_backend_object_p): Define. gas/ * config/tc-nios2.c: Adjust includes. (OPTION_MARCH): Define. (md_longopts): Add -march option. (nios2_architecture): New. (nios2_use_arch): New. (md_parse_option): Handle OPTION_MARCH. (md_show_usage): Document -march. (md_begin): Set arch in BFD. (nios2_elf_final_processing): New. * config/tc-nios2.h (elf_tc_final_processing): Define. (nios2_elf_final_processing): New. * doc/c-nios2.texi (-march): Add documentation. include/elf/ * nios2.h (EF_NIOS2_ARCH_R1, EF_NIOS2_ARCH_R2): Define. ld/testsuite/ * ld-nios2/mixed1a.d: New. * ld-nios2/mixed1a.s: New. * ld-nios2/mixed1b.d: New. * ld-nios2/mixed1b.s: New. * ld-nios2/nios2.exp: Build the new compatibility tests.
2015-05-11Add Intel MCU support to bfdH.J. Lu1-0/+6
bfd/ * Makefile.am (ALL_MACHINES): Add cpu-iamcu.lo. (ALL_MACHINES_CFILES): Likewise. * archures.c (bfd_mach_iamcu): New. (bfd_mach_i386_iamcu): Likewise. (bfd_mach_i386_iamcu_intel_syntax): Likewise. (bfd_iamcu_arch): Likewise. (bfd_archures_list): Add &bfd_iamcu_arch. * config.bfd (targ_selvecs): Add iamcu_elf32_vec to i386_elf32_vec. (targ_archs): Add bfd_iamcu_arch if needed. * configure.ac: Support iamcu_elf32_vec. * cpu-iamcu.c: New file. * elf32-i386.c (elf32_iamcu_elf_object_p): New function. Add support for iamcu_elf32_vec and elf32_iamcu_bed. * targets.c (iamcu_elf32_vec): New. (_bfd_target_vector): Add iamcu_elf32_vec. * Makefile.in: Regenerated. * bfd-in2.h: Likewise. * configure: Likewise. binutils/testsuite/ * binutils-all/objdump.exp (cpus_expected): Append iamcu.
2015-01-28FT32 initial supportAlan Modra1-0/+4
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-12-06Add Visium support to bfdEric Botcazou1-0/+4
bfd/ * config.bfd: Add Visium support. * configure.ac: Likewise. * configure: Regenerate. * Makefile.am (ALL_MACHINES): Add cpu-visium.lo. (ALL_MACHINES_CFILES): Add cpu-visium.c. (BFD32_BACKENDS): Add elf32-visium.lo. (BFD32_BACKENDS_CFILES): Add elf32-visium.c. * Makefile.in: Regenerate. * archures.c (DESCRIPTION): Add Visium support. (bfd_visium_arch): Declare. (bfd_archures_list): Add bfd_visium_arch. * reloc.c: Add Visium relocations. * targets.c (visium_elf32_vec): Declare. (_bfd_target_vector): Add visium_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. * cpu-visium.c: New file. * elf32-visium.c: Likewise. * po/SRC-POTFILES.in: Regenerate. include/elf/ * common.h (EM_VISIUM): Define. * visium.h: New file.
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S1-0/+1
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-09-15Add support for MIPS R6.Andrew Bennett1-0/+2
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-07-01Add support for the AVR Tiny series of microcontrollers.Barney Stratford1-0/+1
* archures.c: add avrtiny architecture for avr target. * bfd-in2.h: Regenerate. * cpu-avr.c (arch_info_struct): add avrtiny arch info. * elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16 added for 16 bit LDS/STS instruction of avrtiny arch. (avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to BFD_RELOC_AVR_LDS_STS_16. (bfd_elf_avr_final_write_processing): select machine number avrtiny arch. (elf32_avr_object_p): set machine number for avrtiny arch. * libbfd.h: Regenerate. * reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc. * config/tc-avr.c (mcu_types): Add avrtiny arch. Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20 and attiny40. (md_show_usage): Add avrtiny arch in usage message. (avr_operand): validate and issue error for invalid register for avrtiny. add new reloc exp for 16 bit lds/sts instruction. (md_apply_fix): check 16 bit lds/sts operand for out of range and encode. (md_assemble): check ISA for arch and issue diagnostic. * include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number. (R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number. * include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA. (AVR_ISA_2xxxa): define ISA without LPM. (AVR_ISA_AVRTINY): define avrtiny arch ISA. Add doc for contraint used in 16 bit lds/sts. Adjust ISA group for icall, ijmp, pop and push. Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints. * opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts. (print_insn_avr): do not select opcode if insn ISA is avrtiny and machine is not avrtiny. * Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source. (eavrtiny.c): add rules for avrtiny emulation source. * Makefile.in: Regenerate. * configure.tgt: Add avrtiny to avr target emulations. * scripttempl/avrtiny.sc: New file. linker script template for avrtiny arch. * emulparams/avrtiny.sh: New file. emulation parameters for avrtiny arch.
2014-05-07Add MIPS r3 and r5 support.Andrew Bennett1-0/+4
This patch firstly adds support for mips32r3 mips32r5, mips64r3 and mips64r5. Secondly it adds support for the eretnc instruction. ChangeLog: bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3, mips32r5 and mips64r5. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (arch_info_struct): Likewise. * elfxx-mips.c (mips_set_isa_flags): Likewise. gas/ * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3 and mips64r5. (ISA_HAS_64BIT_FPRS): Likewise. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5. (ISA_HAS_DROR): Likewise. (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and OPTION_MIPS64R5. (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and mips64r5. (md_parse_option): Likewise. (s_mipsset): Likewise. (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. Also change p5600 entry to be mips32r5. * configure.in: Add support for mips32r3, mips32r5, mips64r3 and mips64r5. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and -mips64r5 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3, mips32r5, mips64r3 and mips64r5 isas to the testsuite. * gas/mips/r5.s: New test. * gas/mips/r5.d: Likewise. include/opcode/ * mips.h (INSN_ISA_MASK): Updated. (INSN_ISA32R3): New define. (INSN_ISA32R5): New define. (INSN_ISA64R3): New define. (INSN_ISA64R5): New define. (INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32 INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered. (mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. (INSN_UPTO32R3): New define. (INSN_UPTO32R5): New define. (INSN_UPTO64R3): New define. (INSN_UPTO64R5): New define. (ISA_MIPS32R3): New define. (ISA_MIPS32R5): New define. (ISA_MIPS64R3): New define. (ISA_MIPS64R5): New define. (CPU_MIPS32R3): New define. (CPU_MIPS32R5): New define. (CPU_MIPS64R3): New define. (CPU_MIPS64R5): New define. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction. (I34): New define. (I36): New define. (I66): New define. (I68): New define. * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and mips64r5. (parse_mips_dis_option): Update MSA and virtualization support to allow mips64r3 and mips64r5.
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-6/+5
with support for the new or1k configuration.
2014-03-05Update copyright yearsAlan Modra1-1/+1
generated by cgit v1.1 at 2024-12-06 14:06:19 +0000