| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR 21266
* elf64-ppc.c (compare_symbols): Stabilize sort.
|
|
If you should somehow link non-pic objects into a PIE or shared
library, resulting in an object with DT_TEXTREL (text relocations)
set, and your executable or shared library also contains GNU indirect
functions, then you're in trouble. To apply dynamic relocations
ld.so will make the text segment writable. On most systems this will
make the text segment non-executable, which will then result in a
segfault when ld.so tries to run ifunc resolvers when applying
relocations against ifuncs.
This patch teaches PowerPC ld to detect the situation, and warn.
* elf64-ppc.c (struct ppc_link_hash_table): Add
local_ifunc_resolver and maybe_local_ifunc_resolver.
(ppc_build_one_stub): Set flags on emitting dynamic
relocation to ifunc.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_finish_dynamic_symbol): Likewise.
(ppc64_elf_finish_dynamic_sections): Error on DT_TEXTREL with
local dynamic relocs to ifuncs.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add
local_ifunc_resolver and maybe_local_ifunc_resolver.
(ppc_elf_relocate_section): Set flag on emitting dynamic
relocation to ifuncs.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Error on DT_TEXTREL with local
dynamic relocs to ifuncs.
|
|
R_AARCH64_TLSDESC_ADD_LO12_NC to R_AARCH64_TLSDESC_ADD_LO12.
PR binutils/21202
include * elf/aarch64.h (R_AARCH64_TLSDESC_LD64_LO12_NC): Rename to
R_AARCH64_TLSDESC_LD64_LO12.
(R_AARCH64_TLSDESC_ADD_LO12_NC): Rename to
R_AARCH64_TLSDESC_ADD_LO12_NC.
bfd * reloc.c (BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC): Rename to
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12.
(BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC): Rename to
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Update reloc
names.
(IS_AARCH64_TLSDESC_RELOC): Likewise.
(elfNN_aarch64_howto_table): Likewise.
(aarch64_tls_transition_without_check): Likewise.
(aarch64_reloc_got_type): Likewise.
(elfNN_aarch64_final_link_relocate): Likewise.
(elfNN_aarch64_tls_relax): Likewise.
(elfNN_aarch64_relocate_section): Likewise.
(elfNN_aarch64_gc_sweep_hook): Likewise.
(elfNN_aarch64_check_relocs): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
gas * config/tc-aarch64.c (reloc_table): Rename
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. Rname
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
* testsuite/gas/aarch64/tls.d: Update regexp.
ld * testsuite/ld-aarch64/ifunc-5r-local.d: Update regexp.
|
|
* elf32-ppc.c: Remove ATTRIBUTE_UNUSED throughout when function
parameter is in fact used. Whitespace fixes.
* elf64-ppc.c: Likewise.
|
|
rs6000-core.c.
* rs6000-core.c (CORE_NEW): Simplify macro when
AIX_CORE_DUMPX_CORE and BFD64 are true to avoid compile warning.
|
|
ppc64_elf_relocate_section lacked a check which meant that it emitted
dynamic relocs against a hidden undefweak symbol for which no dynamic
relocs had been allocated.
PR 21224
PR 20519
* elf64-ppc.c (ppc64_elf_relocate_section): Add missing
dyn_relocs check.
|
|
bfd/
* elf-bfd.h (struct eh_cie_fde): Add u.cie.per_encoding_aligned8.
* elf-eh-frame.c (size_of_output_cie_fde): Don't align here.
(next_cie_fde_offset): New function.
(_bfd_elf_parse_eh_frame): Set u.cie.per_encoding_aligned8.
(_bfd_elf_discard_section_eh_frame): Align zero terminator to
four bytes. Align CIEs to four or eight bytes depending on
per_encoding_aligned8. Align FDEs according to their encoding.
Pad last FDE to output section alignment.
(_bfd_elf_write_section_eh_frame): Adjust to suit. Remove
assertion.
* elf64-ppc.c (glink_eh_frame_cie): Delete padding.
(ppc64_elf_size_stubs): Pad glink eh_frame as per elf-eh-frame.c.
(ppc64_elf_finish_dynamic_sections): Adjust to suit.
ld/
* testsuite/ld-elf/eh3.d: Adjust for eh_frame alignment change.
* testsuite/ld-elf/eh6.d: Likewise.
* testsuite/ld-alpha/tlsbin.dd: Likewise.
* testsuite/ld-alpha/tlsbin.td: Likewise.
* testsuite/ld-alpha/tlsbinr.dd: Likewise.
* testsuite/ld-alpha/tlspic.dd: Likewise.
* testsuite/ld-alpha/tlspic.rd: Likewise.
* testsuite/ld-alpha/tlspic.sd: Likewise.
* testsuite/ld-alpha/tlspic.td: Likewise.
* testsuite/ld-mips-elf/eh-frame1-n64.d: Likewise.
* testsuite/ld-mips-elf/eh-frame2-n64.d: Likewise.
* testsuite/ld-mips-elf/eh-frame3.d: Likewise.
* testsuite/ld-x86-64/pr20830a.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
|
|
PR ld/21212
* elf.c (rewrite_elf_program_header): Do not issue a warning for
empty segments which have a zero filesz, but a non-zero memsz.
|
|
when that header's file size is non-zero.
PR ld/21212
* elf.c (rewrite_elf_program_header): Do not issue a warning for
empty segments which have a non-zero filesz.
|
|
* elf32-ppc.c (ppc_elf_vle_split16): Correct insn mask typo.
|
|
In the last patch I said "The patch also fixes overflow checking".
In fact, there wasn't anything wrong with the previous code. So,
revert that change. The new checks are OK too, so this is just a
tidy.
* elf64-ppc.c (ppc64_elf_ha_reloc): Revert last change.
(ppc64_elf_relocate_section): Likewise.
|
|
A number of places in elf32-nios.c created dynamic sections but didn't
set the hash table dynobj. That meant we could have duplicate dynamic
sections connected to a number of bfds, so size_dynamic_sections
didn't properly discard or allocate contents.
Also, the entire set of dynamic sections was created in check_relocs
on seeing GOT relocs, when only .got related sections are needed,
probably done to hide segfaults later in finish_dynamic_sections.
The patch fixes these issues and makes the assembler emit errors when
nios2 lacks the necessary pc-relative relocs for subtraction
expressions, rather than silently generating bad code.
eg. ld-elf/merge. I've also tidied uses of elf32_nios2_hash_table and
elf_hash_table.
bfd/
PR 20995
* elf32-nios2.c (nios2_elf32_relocate_section): Use htab
rather than elf32_nios2_hash_table or elf_hash_table.
(create_got_section): Likewise.
(nios2_elf32_finish_dynamic_symbol): Likewise.
(nios2_elf32_adjust_dynamic_symbol): Likewise.
(nios2_elf32_size_dynamic_sections): Likewise.
(nios2_elf32_check_relocs): Delete dynobj, sgot, and srelgot
vars. Use htab equivalents directly instead. Don't create
all dynamic sections on needing just the GOT. Use a goto
rather than a fall-through with reloc test. Ensure
htab->dynobj is set when making dynamic sreloc section.
(nios2_elf32_finish_dynamic_sections): Delete dynobj, use htab
equivalent directly instead. Don't segfault on looking for
.dynamic when dynamic sections have not been created. Don't
segfault on .got.plt being discarded.
(nios2_elf32_size_dynamic_sections): Delete plt and got vars.
Don't set "relocs" on .rela.plt. Do handle .sbss. Delete
fixme and another not so relevant comment.
(nios2_elf_add_symbol_hook): Delete dynobj var. If not
already set, set hash table dynobj on creating .sbss.
gas/
* config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
ld/
* testsuite/ld-elf/merge.d: xfail for nios.
|
|
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
|
|
I'd made this dynamic section read-only so a flag test distinguished
it from .dynbss, but like any other .data.rel.ro section it really
should be marked read-write. (It is read-only after relocation, not
before.) When using the standard linker scripts this usually doesn't
matter since the output section is among other read-write sections and
not page aligned. However, it might matter in the extraordinary case
of the dynamic section being the only .data.rel.ro section with the
output section just happening to be page aligned and a multiple of a
page in size. In that case the output section would be read-only, and
live it its own read-only PT_LOAD segment, which is incorrect.
* elflink.c (_bfd_elf_create_dynamic_sections): Don't make
dynamic .data.rel.ro read-only.
* elf32-arm.c (elf32_arm_finish_dynamic_symbol): Compare section
rather than section flags when deciding where copy reloc goes.
* elf32-cris.c (elf_cris_finish_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_finish_dynamic_symbol): Likewise.
* elf32-i386.c (elf_i386_finish_dynamic_symbol): Likewise.
* elf32-metag.c (elf_metag_finish_dynamic_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_finish_dynamic_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol): Likewise.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_finish_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_finish_dynamic_symbol): Likewise.
* elf32-tic6x.c (elf32_tic6x_finish_dynamic_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_finish_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_finish_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_finish_dynamic_symbol): Likewise.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_finish_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_finish_dynamic_symbol): Likewise.
|
|
Interpret the `jalr $0, $25' instruction encoding with an R_MIPS_JALR
relocation attached as an alias to `jr $25' and convert the jump to an
equivalent branch where possible, consequently covering the MIPSr6
architecture for the purpose of this optimization too.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Also handle the
`jalr $0, $25' instruction encoding.
gas/
* testsuite/gas/mips/jalr4.s: Add `jalr $0, $25' instructions.
* testsuite/gas/mips/jalr4.d: Adjust accordingly. Remove MIPSr6
encoding patterns.
* testsuite/gas/mips/jalr4-n64.d: Likewise.
* testsuite/gas/mips/mipsr6@jalr4.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n32.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n64.d: New test.
ld/
* testsuite/ld-mips-elf/jalr4.dd: Adjust for `jalr $0, $25'
instructions.
* testsuite/ld-mips-elf/jalr4-r6.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
scheduled for a slot in the PLT.
PR ld/21180
* elf32-microblaze.c (microblaze_elf_finish_dynamic_symbol): Avoid
generating a seg-fault when encountering a symbol that has been
deleted by garbage collection.
|
|
This patch fixes a number of issues in the ARC backend.
- The ARC size_dynamic_sections was trashing dynamic section contents,
in particular the .gnu.version_d contents. Those versions
definitions are therefore lost so they do not drain from the strtab,
resulting in assertion failures.
- The code attempting to set DT_TEXTREL was completely bogus.
- The ARC finish_dynamic_sections would segfault on trying to set
sh_entsize for .rela.plt if that section had been discarded.
- arc_create_dynamic_sections wouldn't have ever created dynamics
sections, which was just as well since the places it was called were
way too late to create dynamic sections. Its usefulness then
devolved down to finding just one dynamic section. All the others
packaged into a struct were unused.
- .interp wasn't set for PIEs.
* elf32-arc.c (struct dynamic_sections): Delete.
(enum dyn_section_types): Delete.
(dyn_section_names): Delete.
(arc_create_dynamic_sections): Delete.
(elf_arc_finish_dynamic_sections): Don't call the above. Don't
segfault on discarded .rela.plt section.
(elf_arc_size_dynamic_sections): Formatting. Don't call
arc_create_dynamic_sections. Don't allocate memory for sections
handled by the generic linker. Correct code finding relocs in
read-only sections. Set SEC_EXCLUDE on zero size .got,
.got.plt, and .dynbss sections. Do set .interp for pies.
|
|
bfd/ChangeLog:
2017-02-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (GP_NAME): New macro.
(riscv_global_pointer_value): Use it.
(_bfd_riscv_relax_lui): If symbol and global pointer are in same
output section, consider only that section's alignment.
|
|
Remove separate original NewABI JALR relocation handling, introduced
with commit d06471104a83 ("relax jalr $t9 [R_MIPS_JALR symbol] to bal
symbol"), <https://sourceware.org/ml/binutils/2003-03/msg00394.html>,
and only used by LD with the `--relax' option specified, and rely solely
on `mips_elf_perform_relocation' code, which has been introduced with
commit 1367d393bb74 ("On the RM9000 convert jal to bal if in range"),
<https://www.sourceware.org/ml/binutils/2004-12/msg00088.html> and since
made more complete, across all the three ABIs.
Also remove the `--relax' option, now irrelevant, from the tests added
with the former commit.
bfd/
* elfxx-mips.h (_bfd_mips_relax_section): Remove prototype.
* elfxx-mips.c (_bfd_mips_relax_section): Remove function.
* elf64-mips.c (bfd_elf64_bfd_relax_section): Remove macro.
* elfn32-mips.c (bfd_elf32_bfd_relax_section): Likewise.
ld/
* testsuite/ld-mips-elf/relax-jalr-n32.d: Remove `--relax'
option.
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
|
|
Discard R_MIPS_JALR and R_MICROMIPS_JALR relocations associated with
jumps that cannot be converted to an equivalent branch right away in
`mips_elf_calculate_relocation' rather than letting them through to
`mips_elf_perform_relocation'. This includes cross-mode jumps which
need to flip the ISA bit or jumps to a misaligned location that cannot
be encoded with a branch, in addition to preemptible symbol references
already handled.
Cross-mode jumps are actually already rejected as the conversion is made
in `mips_elf_perform_relocation', so in this case this change only saves
some processing. Jumps to a misaligned location are however converted,
with bits causing misalignment lost, making resulting code functionally
different even if the lone effect is avoiding an address error exception
with an instruction fetch at the jump destination requested.
Add test cases suitable, also including GAS verification to confirm that
the JALR relocations explicitly requested have indeed been output in the
intermediate objects used.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_JALR>
<R_MICROMIPS_JALR>: Discard relocation if `cross_mode_jump_p'
or misaligned.
gas/
* testsuite/gas/mips/jalr4.d: New test.
* testsuite/gas/mips/jalr4-n32.d: New test.
* testsuite/gas/mips/jalr4-n64.d: New test.
* testsuite/gas/mips/jalr4.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalr4.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
PR 20744
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Correct dst_mask on all VLE
16D relocations.
(ppc_elf_vle_split16): Correct field mask and shift for 16D relocs.
(ppc_elf_relocate_section): Correct calculation for VLE SDAREL
relocs.
ld/
* testsuite/ld-powerpc/vle-reloc-2.s: Use r6 for last insn of
each group.
* testsuite/ld-powerpc/vle-reloc-2.d: Update for above change
and sdarel reloc fix.
|
|
Complement commit b531344c34b0 ("PR ld/20828: Reorder the symbol sweep
stage of section GC") and commit 81ff47b3a546 ("PR ld/20828: Fix linker
script symbols wrongly forced local with section GC") and move symbol
version processing ahead of the symbol sweep stage of section GC, all in
`bfd_elf_size_dynamic_sections', so that version symbols created stay in
the global scope and are not output as local symbols to the dynamic
symbol table in the presence of corresponding symbol definitions pulled
from a DSO involved in a link.
Consolidate the whole of symbol version processing into a single block
from all parts scattered across the function and rearranging the local
variables used as necessary, however leaving the setting of dynamic
entries associated with the DT_VERDEF, DT_VERDEFNUM, DT_VERNEED and
DT_VERNEEDNUM tags and the SEC_EXCLUDE flag for unused `.gnu.version'
section in the original places.
With the rearrangement of code blocks `Elf_Internal_Verneed *t' would
shadow the previous definition of `struct bfd_elf_version_tree *t', so
rename the former variable to `vn'.
bfd/
PR ld/20828
* elflink.c (bfd_elf_size_dynamic_sections): Move symbol version
processing ahead of the call to `elf_gc_sweep_symbol'.
ld/
PR ld/20828
* testsuite/ld-elf/pr20828-d.sd: New test.
* testsuite/ld-elf/pr20828-e.sd: New test.
* testsuite/ld-elf/pr20828-v.od: New test.
* testsuite/ld-elf/pr20828-v.ver: New test version script.
* testsuite/ld-elf/pr20828-v.ld: New test linker script.
* testsuite/ld-elf/pr20828.ld: Add `.gnu.version' and
`.gnu.version_d'.
* testsuite/ld-elf/shared.exp: Run the new tests.
|
|
PR binutils/21193
* opncls.c (bfd_create_gnu_debuglink_section): Give the newly
created section 4-byte alignment.
|
|
bfd/
* elf64-ppc.c (ppc64_elf_finish_dynamic_sections): Don't segfault
on .got or .plt output section being discarded by script.
* elf32-ppc.c (ppc_elf_finish_dynamic_sections): Likewise. Move
vxworks splt temp.
gold/
* powerpc.cc (Target_powerpc::make_iplt_section): Check that
output_section exists before attempting add_output_section_data.
(Target_powerpc::make_brlt_section): Likewise.
|
|
* elf64-alpha.c (elf64_alpha_size_dynamic_sections): Only emit
DT_RELA, DT_RELASZ, and DT_RELAENT when DT_RELASZ is non-zero.
|
|
PR 21181
* elflink.c (bfd_elf_final_link): Make DT_REL/DT_RELA zero
if DT_RELSZ/DT_RELASZ is zero.
|
|
declaration of the size of the input buffer.
* compress.c (bfd_get_full_section_contents): Remember to reduce
compressed size by the sizeof the compression header when
decompressing the contents.
|
|
The direct references in objcopy kind of look like a hack to me, so
I'm calling these symbols internal too. Certainly they aren't named
and documented as a public BFD symbol today anyway.
So ... give these bfd-internal symbols with external linkage a _bfd_
prefix to avoid collisions in the global symbol namespace.
While at it, give them names that more closely match the corresponding
option name that toggles them.
Also while at it, fix a few related comment typos.
gdb/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* srec.c (Chunk): Rename to ...
(_bfd_srec_len): ... this.
(S3Forced): Rename to ...
(_bfd_srec_forceS3): ... this.
* objcopy.c: Adjust all references.
|
|
Give these bfd-internal symbols with external linkage a _bfd_ prefix
to avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* archive.c (bsd_write_armap): Rename to ...
(_bfd_bsd_write_armap): ... this.
(coff_write_armap): Rename to ...
(_bfd_coff_write_armap): ... this.
* libbfd-in.h (bsd_write_armap): Rename to ...
(_bfd_bsd_write_armap): ... this.
(coff_write_armap): Rename to ...
(_bfd_coff_write_armap): ... this.
* aout-target.h, aout-tic30.c: Adjust all users.
* libbfd.h: Regenerate.
|
|
Give this bfd-internal symbol with external linkage a _bfd_ prefix to
avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* bfd-in.h (bfd_read, bfd_write): Adjust to rename.
(warn_deprecated): Rename to ...
(_bfd_warn_deprecated): ... this.
* libbfd.c (warn_deprecated): Rename to ...
(_bfd_warn_deprecated): ... this.
* bfd-in2.h: Regenerate.
|
|
Give these bfd-internal symbols with external linkage a _bfd_ prefix
to avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* bfdio.c (real_ftell): Rename to ...
(_bfd_real_ftell): ... this.
(real_fseek): Rename to ...
(_bfd_real_fseek): ... this.
(real_fopen): Rename to ...
(_bfd_real_fopen): ... this.
* libbfd-in.h (real_ftell): Rename to ...
(_bfd_real_ftell): ... this.
(real_fseek): Rename to ...
(_bfd_real_fseek): ... this.
(real_fopen): Rename to ...
(_bfd_real_fopen): ... this.
* cache.c, dwarf2.c, opncls.c: Adjust all callers.
* libbfd.h: Regenerate.
|
|
Give these bfd-internal symbols with external linkage a _bfd_ prefix
to avoid collisions in the global symbol namespace.
bfd/ChangeLog:
2017-02-17 Pedro Alves <palves@redhat.com>
* dwarf2.c, elf-attrs.c, elf32-nds32.c: Adjust all callers.
* libbfd.c (read_unsigned_leb128): Rename to ...
(_bfd_read_unsigned_leb128): ... this.
(read_signed_leb128): Rename to ...
(_bfd_read_signed_leb128): ... this.
(safe_read_leb128): Rename to ...
(_bfd_safe_read_leb128): ... this.
* libbfd-in.h (read_unsigned_leb128): Rename to ...
(_bfd_read_unsigned_leb128): ... this.
(read_signed_leb128): Rename to ...
(_bfd_read_signed_leb128): ... this.
(safe_read_leb128): Rename to ...
(_bfd_safe_read_leb128): ... this.
* libbfd.h: Renegerate.
|
|
When looking up file and line information (used from the linker to
report error messages) if no symbol is passed in, then use the symbol
list to look for a matching symbol.
If a matching symbol is found then use this to look up the file / line
information.
This should improve errors when looking up file / line information for
data sections. Hopefully we should find a matching data symbol, which
should, in turn (we hope) match a DW_TAG_variable in the DWARF, this
should allow us to give accurate file / line errors for data symbols.
As the hope is to find a matching DW_TAG_variable in the DWARF then we
ignore section symbols, and prefer global symbols to locals.
bfd/ChangeLog:
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Perform symbol lookup
before trying to fine matching file and line information.
ld/ChangeLog:
* testsuite/ld-elf/shared.exp: Update expected results.
* testsuite/ld-elf/dwarf2.err: Likewise
|
|
When parsing DWARF data in order to report file/line type error messages
we perform section placement to make section addresses unique within
relocatable object files.
Currently, if we reuse previously loaded (and cached) dwarf data then we
neglect to perform section placement, the result is that the section
addresses will not be unique, and we might, incorrectly associate an
address with the wrong debug information, and so report an incorrect
file and line number.
Further we neglect to check that that bfd for which we are looking up
debug information is actually the bfd for which the previous debug
information was loaded, it is possible that we will reuse previously
loaded debug information for a different bfd.
And finally, due to following of gnu_debuglink links in one bfd to
another, the process of checking that the cached debug information is
valid requires us to track the original bfd in the cached debug
information. The original debug information here is either the bfd that
we're interested in, not the bfd we finally load the debug information
from.
bfd/ChangeLog:
* dwarf2.c (struct dwarf2_debug): Add orig_bfd member.
(_bfd_dwarf2_slurp_debug_info): If stashed debug information does
not match current bfd, then reload debug information. Record bfd
we're loading debug info for in the stash. If we have debug
informatin in the cache then perform section placement before
returning.
ld/ChangeLog:
* testsuite/ld-elf/dwarf.exp (build_tests): Add new tests.
* testsuite/ld-elf/dwarf2.err: New file.
* testsuite/ld-elf/dwarf2a.c: New file.
* testsuite/ld-elf/dwarf2b.c: New file.
* testsuite/ld-elf/dwarf3.c: New file.
* testsuite/ld-elf/dwarf3.err: New file.
|
|
I misunderstood the hppa alias problem. File offsets of segments need
to be such that no page is mapped twice with different permissions.
(Which still seems to me like something the kernel could fix, but
anyhow, this is not so difficult to achieve in ld.)
PR 21000
bfd/
* elf-bfd.h (struct elf_backend_data): Add no_page_alias.
* elfxx-target.h (elf_backend_no_page_alias): Define.
(elfNN_bed): Init new field.
* elf.c (assign_file_positions_for_load_sections): If no_page_alias
ensure PT_LOAD segment starts on a new page.
* elf32-hppa.c (elf_backend_no_page_alias): Define.
ld/
* testsuite/ld-elf/loadaddr1.d: Adjust for hppa file offsets.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-elf/loadaddr3a.d: Likewise.
* testsuite/ld-scripts/rgn-at5.d: Likewise.
|
|
This fixes a long-standing hppa bug seen when generating PIEs, and I
think possible to trigger with forced local symbols in shared
libraries. Not allocating enough space for PLT relocs results in ld
writing outside of the buffer.
PR 21132
* elf32-hppa.c (allocate_plt_static): Allocate space for relocs
if pic.
|
|
bfd/
* bfd.c (BFD_FLAGS_SAVED): Add BFD_LINKER_CREATED.
* bfd-in2.h: Regenerated.
Bug exposed by https://sourceware.org/ml/binutils/2017-02/msg00128.html
|
|
"lea foo@GOT, %reg" is OK in PIC since it only loads the GOT offset
into register, which can be used later with a GOT base register to
get the value in the GOT entry.
bfd/
PR ld/21168
* elf32-i386.c (elf_i386_relocate_section): Allow
"lea foo@GOT, %reg" in PIC.
ld/
PR ld/21168
* testsuite/ld-i386/i386.exp: Run pr21168.
* testsuite/ld-i386/pr21168a.c: New file.
* testsuite/ld-i386/pr21168b.S: Likewise.
|
|
bfd/
PR ld/20244
* elf32-i386.c (elf_i386_relocate_section): Properly get IFUNC
symbol name when reporting R_386_GOT32/R_386_GOT32X relocation
error against local IFUNC symbol without a base register for
PIC.
ld/
PR ld/20244
* testsuite/ld-i386/i386.exp: Run pr20244-4a, pr20244-4b and
pr20244-4c.
* testsuite/ld-i386/pr20244-4.s: New file.
* testsuite/ld-i386/pr20244-4a.d: Likewise.
* testsuite/ld-i386/pr20244-4b.d: Likewise.
* testsuite/ld-i386/pr20244-4c.d: Likewise.
|
|
Remove an inconsistency in BFD linker error messages across the PowerPC
backends, where in the presence of line information the `%P: %H:' format
sequence makes the first error message produced for any given function
different from subsequent ones.
Taking the `ld/testsuite/ld-powerpc/tocopt7.s' test case source as an
example and the `powerpc-linux' target we have:
$ as -gdwarf2 -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
ld: tocopt.o: In function `_start':
tocopt.s:35:(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
ld: tocopt.s:49:(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$
where the first error message does not have the source file name
prefixed with the linker program executable's name, i.e. `ld:', whereas
the second error message does, as would any subsequent.
This is because with a multiple-line error message such as `%H' produces
`%P' only prints the program executable's name on the first line and not
any later ones. Also the PowerPC backend is the only part of BFD which
uses `%P' along with one of the clever `%C', `%D', `%G', `%H' format
specifiers. And last but not least this breaks a GNU Coding Standard's
requirement that error messages from compilers should look like this:
source-file-name:lineno: message
also quoted in `vfinfo' code handling these specifiers.
Convert `%P: %H:' to `%H:' in error messages across the PowerPC backends
then, yielding:
$ as -gdwarf2 -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
tocopt.s:35:(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
tocopt.s:49:(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$
instead, making it consistent and matching the GNU Coding Standard's
requirement.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Use `%H:' rather than
`%P: %H:' with `info->callbacks->einfo'.
(ppc_elf_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
(ppc64_elf_edit_toc): Likewise.
(ppc64_elf_relocate_section): Likewise.
|
|
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Support
--gc-keep-exported, and test versioned field of sym rather than
looking for @ in name.
|
|
"_gp" could conflict with ABI-complient code. While it's probably OK
because MIPS uses this name, we figured it'd be good to clean this up
before a release with RISC-V in it.
ld/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* emulparams/elf32lriscv-defs.sh (SDATA_START_SYMBOLS): Change
_gp to __global_pointer$.
bfd/ChangeLog:
2017-02-13 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (riscv_global_pointer_value): Change _gp to
__global_pointer$.
|
|
PR binutils/21151
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Check for an invalid
unit length field.
|
|
bfd/ChangeLog
2017-02-07 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (riscv_elf_finish_dynamic_sections): Only write PLT
entry size if PLT header is written.
|
|
Fixes ld/testsuite/ld-elf/shared.exp "Build libpr16496b.so".
The root cause is in bfd/elf64-sparc.c, elf64_sparc_slurp_one_reloc_table(),
bfd_get_symcount() was used for dynamic mode as well. The fix is to use
bfd_get_dynamic_symcount().
This has been tested with sparc64-linux-gnu, and it does not introduce any
regressions.
bfd/ChangeLog:
2017-02-06 Sheldon Lobo <sheldon.lobo@oracle.com>
Fix sparc64 dynamic relocation processing to use the dynamic
symbol count.
* elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Use 'dynamic'
to determine if bfd_get_symcount() or bfd_get_dynamic_symcount()
should be used.
|
|
PR 21096
bfd * coffcode.h (coff_write_object_contents): Enlarge size of
s_name_buf in order to avoid compile time warning about possible
integer truncation.
* elf32-nds32.c (nds32_elf_ex9_import_table): Mask off lower
32-bits of insn value before printing into buffer.
opcodes * aarch64-opc.c (print_register_list): Ensure that the register
list index will fir into the tb buffer.
(print_register_offset_address): Likewise.
* tic6x-dis.c (print_insn_tic6x): Increase size of func_unit_buf.
|
|
Ensure all local symbols precede external symbols in the dynamic symbol
table.
No local symbols are expected to make it to the dynamic symbol table
except for section symbols already taken care of, so this is really a
safeguard only against a potential BFD bug otherwise not so harmful,
which may become a grave one due to a symbol table sorting requirement
violation (see PR ld/20828 for an example). This means however that no
test suite coverage is possible for this change as code introduced here
is not normally expected to trigger.
Logically split then the part of the dynamic symbol table which is not
global offset table mapped, into a local area at the beginning and an
external area following. By the time `mips_elf_sort_hash_table' is
called we have the number of local dynamic symbol table entries (section
and non-section) already counted in `local_dynsymcount', so use it to
offset the external area from the beginning.
bfd/
* elfxx-mips.c (mips_elf_hash_sort_data): Add
`max_local_dynindx'.
(mips_elf_sort_hash_table): Handle it.
(mips_elf_sort_hash_table_f) <GGA_NONE>: For forced local
symbols bump up `max_local_dynindx' rather than
`max_non_got_dynindx'.
|
|
Use the `bfd_size_type' data type for dynamic symbol table indices in
the MIPS backend, in line with generic code and removing the need to use
a cast.
bfd/
* elfxx-mips.c (mips_elf_hash_sort_data): Convert the
`min_got_dynindx', `max_unref_got_dynindx' and
`max_non_got_dynindx' members to the `bfd_size_type' data type.
(mips_elf_sort_hash_table): Adjust accordingly.
|
|
Make all hash table references throughout `mips_elf_sort_hash_table' use
`htab', simplifying code and improving readability.
bfd/
* elfxx-mips.c (mips_elf_sort_hash_table): Use `htab' throughout
to access the hash table.
|
|
Move the assertion on non-NULL `htab' in `mips_elf_sort_hash_table' to
the beginning, before the pointer is dereferenced (`mips_elf_hash_table
(info)' and `elf_hash_table (info)' both point to the same memory
location, differently typed).
bfd/
* elfxx-mips.c (mips_elf_sort_hash_table): Move assertion on
non-NULL `htab' to the beginning.
|
