aboutsummaryrefslogtreecommitdiff
path: root/ChangeLog
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12Fix gdbserver build when intl already builtTom Tromey1-0/+5
gdbserver uses gdb's alloc.c, and this in turn can include headers from intl via gdbsupport/gdb_locale.h. This can cause build failures in some situations, for example if you build gdb and gdbserver on mingw. This patch restores the gdbsupport dependency on intl, and changes gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build problem. ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def (gdbsupport): Depend on intl. gdbserver/ChangeLog 2020-03-12 Tom Tromey <tom@tromey.com> * config.in, configure: Rebuild. * configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR. * acinclude.m4: Include gettext-sister.m4. * Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New variables. (INCLUDE_CFLAGS): Add INTL_CFLAGS. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
2020-02-17Fix gdbserver-without-gdb buildTom Tromey1-0/+6
An earlier patch changed gdbserver to use the already-built top-level gnulib and gdbsupport. However, if one did a build that did not include gdb, then gdbserver would fail to build. The problem is that configure.ac only adds gnulib and gdbsupport to the build when gdb is being built. This patch fixes the problem by arranging for this to happen when gdbserver is built. ChangeLog 2020-02-17 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (configdirs): Add gnulib and gdbsupport when building gdbserver.
2020-02-14Change gdbserver to use existing gnulib and libibertyTom Tromey1-0/+5
This changes gdbserver so that it no longer builds its own gnulib and libiberty. Instead, it now relies on the ones that were already built at the top level. gdbsupport is still built specially for gdbserver. This is more complicated and will be tackled in a subsequent patch. ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * Makefile.in: Rebuild. * Makefile.def: Make gdbserver require gnulib and libiberty. gdbserver/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * acinclude.m4: Don't include acx_configure_dir.m4. * Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove. (all, install-only, uninstall, clean-info, clean) (maintainer-clean): Don't recurse. (subdir_do, all-lib): Remove. ($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule. (GNULIB_H): Remove. (generated_files): Update. ($(GNULIB_BUILDDIR)/Makefile): Remove rule. * configure: Rebuild. * configure.ac: Don't configure gnulib or libiberty. (GNULIB): Update. gdbsupport/ChangeLog 2020-02-14 Tom Tromey <tom@tromey.com> * common-defs.h: Change path to gnulib/config.h. Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
2020-02-07Move gdbserver to top levelTom Tromey1-0/+11
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
2020-01-29Adjust src-release.sh's getver due to gdbsupport's move to toplevelSergio Durigan Junior1-0/+6
The move of gdbsupport to the top level directory requires a small change to src-release.sh's "getver" function, which is responsible for determining the version string that will be appended to the release tarball: now the create-version.sh script lives under ./gdbsupport, and not under gdb/gdbsupport anymore. This patch unbreaks the snapshot generation, which hasn't been working since January 14th. ChangeLog: 2020-01-29 Sergio Durigan Junior <sergiodj@redhat.com> * src-release.sh (getver): Look for gdbsupport's create-version.sh script at the current directory if tool is "gdb". Change-Id: Id3b8bed6583a1aaa120c07009366f6c94a62d5db
2020-01-19sim: don't rely on inferior_ptid in gdbsim_target::waitSimon Marchi1-0/+5
When running a program with the simulator target, I get: /home/simark/src/binutils-gdb/gdb/inferior.c:279: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed. This can be reproduced by building a GDB for --target=arm-none-gnueabi, and running with $ ./gdb -nx --data-directory=data-directory a.out -ex "target sim" -ex load -ex "b main" -ex r Where a.out is any program with a main. The problem is that gdbsim_target::wait assumes that inferior_ptid has the value of the thread it wants to report an event for. Actually, it's the target's responsibility to come up with the ptid of the thread the event is for. In the sim target, that ptid is stored in sim_inferior_data::remote_sim_ptid, so return that instead of inferior_ptid. ChangeLog: * remote-sim.c (gdbsim_target::wait): Return sim_data->remote_sim_ptid instead of inferior_ptid.
2020-01-18Add markers for 2.34 branch to the NEWS files and ChangeLogs.Nick Clifton1-0/+4
2020-01-18Update top level config files with copies from the official repository.Nick Clifton1-0/+63
2020-01-01 Ben Elliston <bje@gnu.org> * config.guess: Update copyright years. * config.sub: Likewise. 2019-12-21 Ben Elliston <bje@gnu.org> * config.guess (set_cc_for_build): Prevent multiple calls by checking if $tmp is already set. We can't check CC_FOR_BUILD as the user may set it externally. Thanks to Torbj?rn Granlund for the bug report. 2019-12-21 Torbj?rn Granlund <tg@gmplib.org> * config.guess (alpha:Linux:*:*): Guard against missing /proc/cpuinfo by redirecting standard error to /dev/null. 2019-09-12 Daniel Bittman <danielbittman1@gmail.com> * config.guess (*:Twizzler:*:*): New. * config.sub (-twizzler*): New. 2019-07-24 Ben Elliston <bje@gnu.org> * config.guess (mips:OSF1:*.*): Whitespace cleanup. 2019-06-30 Ben Elliston <bje@gnu.org> * config.sub (case $os): Match nsk* and powerunix. Don't later match nsk* and set os=nsk which removes the OS version number. 2019-06-30 Ben Elliston <bje@gnu.org> * config.sub: Recognise os108*. 2019-06-26 Ben Elliston <bje@gnu.org> * config.sub (hp300): Set $os to hpux. 2019-06-26 Ben Elliston <bje@gnu.org> * config.sub (vsta): Move into alphabetical order. 2019-06-10 Ben Elliston <bje@gnu.org> * config.guess (*:OS108:*:*): Recognise new OS. 2019-05-28 Ben Elliston <bje@gnu.org> * config.guess (*:Darwin:*:*): Run xcode-select to determine if a system compiler is installed. If not, do not run set_cc_for_build, as the default cc will open a dialog box asking to install Xcode. If no C compiler is available, guess based on uname -p and uname -m. 2019-05-28 Ben Elliston <bje@gnu.org> * config.guess (*:Darwin:*:*): Simplify UNAME_PROCESSOR.
2020-01-17Make all-gdbsupport depend on all-bfdSimon Marchi1-0/+5
Trying to run "make all-gdbsupport" at the top-level in a build from scratch results in: make[2]: Entering directory '/home/smarchi/build/binutils-gdb/gdbsupport' CC agent.o In file included from /home/smarchi/src/binutils-gdb/gdbsupport/common-defs.h:133, from /home/smarchi/src/binutils-gdb/gdbsupport/agent.c:20: /home/smarchi/src/binutils-gdb/gdbsupport/common-types.h:35:10: fatal error: bfd.h: No such file or directory 35 | #include "bfd.h" | ^~~~~~~ Before building all-gdbsupport, we need all-bfd to run, so that bfd.h is generated. (Once this patch is merged in the binutils-gdb repo, I'll send it to gcc to keep the files in sync.) ChangeLog: * Makefile.def: Add dependencies of all-gdbsupport on all-bfd. * Makefile.in: Re-generate.
2020-01-14Move gdbsupport to the top levelTom Tromey1-0/+10
This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2020-01-09oops - toplevel changelog entry for previous delta.Aaron Merey1-0/+7
* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD.
2019-12-26Add profiling outputs to .gitignoreChristian Biesinger1-0/+4
"perf record" creates files perf.data/perf.data.old; these can be safely ignored in .gitignore, to avoid showing up in git status. ChangeLog: 2019-12-26 Christian Biesinger <cbiesinger@google.com> * .gitignore: Add perf.data and perf.data.old. Change-Id: I214ae9d6b7265c2cb1356f11c9b0b82e2b391352
2019-10-17Add libctf to src-release.sh:GDB_SUPPORT_DIRSSergio Durigan Junior1-0/+4
We're forgetting to include the libctf directory when creating the snapshot. This commit changes src-release.sh and adds it to GDB_SUPPORT_DIRS. 2019-10-17 Sergio Durigan Junior <sergiodj@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add libctf. Change-Id: Iada82e5c9e4f8d5a0a5e467d2a628f1fba66002e
2019-10-17PR29, Coreutils POSIX2_VERSION as 200112LAlan Modra1-0/+5
As of today we have just the following oddities left ./gnulib/update-gnulib.sh:ver=`autoconf --version 2>&1 | head -1 | sed 's/.*) //'` ./gnulib/update-gnulib.sh:ver=`automake --version 2>&1 | head -1 | sed 's/.*) //'` ./gnulib/update-gnulib.sh:ver=`aclocal --version 2>&1 | grep -v "called too early to check prototype" | head -1 | sed 's/.*) //'` ./src-release.sh: head -1 $tool/version.in ./contrib/dg-extract-results.sh:tail -2 $FIRST_SUM | $GREP '^#' > /dev/null || tail -2 $FIRST_SUM gnulib and contrib (from gcc) are outside of binutils control, so with this patch I'm going to declare this 15 year old bug fixed. PR 29 * src-release.sh (getver): Replace "head -1" with "head -n 1".
2019-10-03libctf: installable libctf as a shared libraryNick Alcock1-0/+5
This lets other programs read and write CTF-format data. Two versioned shared libraries are created: libctf.so and libctf-nobfd.so. They contain identical content except that libctf-nobfd.so contains no references to libbfd and does not implement ctf_open, ctf_fdopen, ctf_bfdopen or ctf_bfdopen_ctfsect, so it can be used by programs that cannot use BFD, like readelf. The soname major version is presently .0 until the linker API stabilizes, when it will flip to .1 and hopefully never change again. New in v3. v4: libtoolize and turn into a pair of shared libraries. Drop --enable-install-ctf: now controlled by --enable-shared and --enable-install-libbfd, like everything else. v5: Add ../bfd to ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR. Fix tabdamage. * Makefile.def (host_modules): libctf is no longer no_install. * Makefile.in: Regenerated. libctf/ * configure.ac (AC_DISABLE_SHARED): New, like opcodes/. (LT_INIT): Likewise. (AM_INSTALL_LIBBFD): Likewise. (dlopen): Note why this is necessary in a comment. (SHARED_LIBADD): Initialize for possibly-PIC libiberty: derived from opcodes/. (SHARED_LDFLAGS): Likewise. (BFD_LIBADD): Likewise, for libbfd. (BFD_DEPENDENCIES): Likewise. (VERSION_FLAGS): Initialize, using a version script if ld supports one, or libtool -export-symbols-regex otherwise. (AC_CONFIG_MACRO_DIR): Add ../BFD. * Makefile.am (ACLOCAL_AMFLAGS): Likewise. (INCDIR): New. (AM_CPPFLAGS): Use $(srcdir), not $(top_srcdir). (noinst_LIBRARIES): Replace with... [INSTALL_LIBBFD] (lib_LTLIBRARIES): This, or... [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): ... this, mentioning new libctf-nobfd.la as well. [INSTALL_LIBCTF] (include_HEADERS): Add the CTF headers. [!INSTALL_LIBCTF] (include_HEADERS): New, empty. (libctf_a_SOURCES): Rename to... (libctf_nobfd_la_SOURCES): ... this, all of libctf other than ctf-open-bfd.c. (libctf_la_SOURCES): Now derived from libctf_nobfd_la_SOURCES, with ctf-open-bfd.c added. (libctf_nobfd_la_LIBADD): New, using @SHARED_LIBADD@. (libctf_la_LIBADD): New, using @BFD_LIBADD@ as well. (libctf_la_DEPENDENCIES): New, using @BFD_DEPENDENCIES@. * Makefile.am [INSTALL_LIBCTF]: Use it. * aclocal.m4: Add ../bfd/acinclude.m4, ../config/acx.m4, and the libtool macros. * libctf.ver: New, everything is version LIBCTF_1.0 currently (even the unstable components). * Makefile.in: Regenerated. * config.h.in: Likewise. * configure: Likewise. binutils/ * Makefile.am (LIBCTF): Mention the .la file. (LIBCTF_NOBFD): New. (readelf_DEPENDENCIES): Use it. (readelf_LDADD): Likewise. * Makefile.in: Regenerated. ld/ * configure.ac (TESTCTFLIB): Set to the .so or .a, like TESTBFDLIB. * Makefile.am (TESTCTFLIB): Use it. (LIBCTF): Use the .la file. (check-DEJAGNU): Use it. * Makefile.in: Regenerated. * configure: Likewise. include/ * ctf-api.h: Note the instability of the ctf_link interfaces.
2019-10-03bfd, ld: add CTF section linkingNick Alcock1-0/+5
This is quite complicated because the CTF section's contents depend on the final contents of the symtab and strtab, because it has two sections whose contents are shuffled to be in 1:1 correspondence with the symtab, and an internal strtab that gets deduplicated against the ELF strtab (with offsets adjusted to point into the ELF strtab instead). It is also compressed if large enough, so its size depends on its contents! So we cannot construct it as early as most sections: we cannot even *begin* construction until after the symtab and strtab are finalized. Thankfully there is already one section treated similarly: compressed debugging sections: the only differences are that compressed debugging sections have extra handling to deal with their changing name if compressed (CTF sections are always called ".ctf" for now, though we have reserved ".ctf.*" against future use), and that compressed debugging sections have previously-uncompressed content which has to be stashed away for later compression, while CTF sections have no content at all until we generate it (very late). BFD also cannot do the link itself: libctf knows how to do it, and BFD cannot call libctf directly because libctf already depends on bfd for file I/O. So we have to use a pair of callbacks, one, examine_strtab, which allows a caller to examine the symtab and strtab after finalization (called from elf_link_swap_symbols_out(), right before the symtabs are written, and after the strtab has been finalized), and one which actually does the emission (called emit_ctf simply because it is grouped with a bunch of section-specific late-emission function calls at the bottom of bfd_elf_final_link, and a section-specific name seems best for that). emit_ctf is actually called *twice*: once from lang_process if the emulation suggests that this bfd target does not examine the symtab or strtab, and once via a bfd callback if it does. (This means that non-ELF targets still get CTF emitted, even though the late CTF emission stage is never called for them). v2: merged with non-ELF support patch: slight commit message adjustments. v3: do not spend time merging CTF, or crash, if the CTF section is explicitly discarded. Do not try to merge or compress CTF unless linking. v4: add CTF_COMPRESSION_THRESHOLD. Annul the freed input ctf_file_t's after writeout: set SEC_IN_MEMORY on the output contents so a future bfd enhancement knows it could free it. Add SEC_LINKER_CREATED | SEC_KEEP to avoid having to add .ctf to the linker script. Drop now-unnecessary ldlang.h-level elf-bfd.h include and hackery around it. Adapt to elf32.em->elf.em and elf-generic.em->ldelf*.c changes. v5: fix tabdamage. Drop #inclusions in .h files: include in .c files, .em files, and use struct forwards instead. Use bfd_section_is_ctf inline function rather than SECTION_IS_CTF macro. Move a few comments. * Makefile.def (dependencies): all-ld depends on all-libctf. * Makefile.in: Regenerated. include/ * bfdlink.h (elf_strtab_hash): New forward. (elf_sym_strtab): Likewise. (struct bfd_link_callbacks <examine_strtab>): New. (struct bfd_link_callbacks <emit_ctf>): Likewise. bfd/ * elf-bfd.h (bfd_section_is_ctf): New inline function. * elf.c (special_sections_c): Add ".ctf". (assign_file_positions_for_non_load_sections): Note that compressed debugging sections etc are not assigned here. Treat CTF sections like SEC_ELF_COMPRESS sections when is_linker_output: sh_offset -1. (assign_file_positions_except_relocs): Likewise. (find_section_in_list): Note that debugging and CTF sections, as well as reloc sections, are assigned later. (_bfd_elf_assign_file_positions_for_non_load): CTF sections get their size and contents updated. (_bfd_elf_set_section_contents): Skip CTF sections: unlike compressed sections, they have no uncompressed content to copy at this stage. * elflink.c (elf_link_swap_symbols_out): Call the examine_strtab callback right before the strtab is written out. (bfd_elf_final_link): Don't cache the section contents of CTF sections: they are not populated yet. Call the emit_ctf callback right at the end, after all the symbols and strings are flushed out. ld/ * ldlang.h: (struct lang_input_statement_struct): Add the_ctf. (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (ldlang_ctf_apply_strsym): Declare. (ldlang_write_ctf_late): Likewise. * ldemul.h (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. (ld_emulation_xfer_type) <emit_ctf_early>: Likewise. (ld_emulation_xfer_type) <examine_strtab_for_ctf>: Likewise. * ldemul.c (ldemul_emit_ctf_early): New. (ldemul_examine_strtab_for_ctf): Likewise. * ldlang.c: Include ctf-api.h. (CTF_COMPRESSION_THRESHOLD): New. (ctf_output): New. Initialized in... (ldlang_open_ctf): ... this new function. Open all the CTF sections in the input files: mark them non-loaded and empty so as not to copy their contents to the output, but linker-created so the section gets created in the target. (ldlang_merge_ctf): New, merge types via ctf_link_add_ctf and ctf_link. (ldlang_ctf_apply_strsym): New, an examine_strtab callback: wrap ldemul_examine_strtab_for_ctf. (lang_write_ctf): New, write out the CTF section. (ldlang_write_ctf_late): New, late call via bfd's emit_ctf hook. (lang_process): Call ldlang_open_ctf, ldlang_merge_ctf, and lang_write_ctf. * ldmain.c (link_callbacks): Add ldlang_ctf_apply_strsym, ldlang_write_ctf_late. * emultempl/aix.em: Add ctf-api.h. * emultempl/armcoff.em: Likewise. * emultempl/beos.em: Likewise. * emultempl/elf.em: Likewise. * emultempl/generic.em: Likewise. * emultempl/linux.em: Likewise. * emultempl/msp430.em: Likewise. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/ticoff.em: Likewise. * emultempl/vanilla.em: Likewise. * ldcref.c: Likewise. * ldctor.c: Likewise. * ldelf.c: Likewise. * ldelfgen.c: Likewise. * ldemul.c: Likewise. * ldexp.c: Likewise. * ldfile.c: Likewise. * ldgram.c: Likewise. * ldlex.l: Likewise. * ldmain.c: Likewise. * ldmisc.c: Likewise. * ldver.c: Likewise. * ldwrite.c: Likewise. * lexsup.c: Likewise. * mri.c: Likewise. * pe-dll.c: Likewise. * plugin.c: Likewise. * ldelfgen.c (ldelf_emit_ctf_early): New. (ldelf_examine_strtab_for_ctf): tell libctf about the symtab and strtab. (struct ctf_strsym_iter_cb_arg): New, state to do so. (ldelf_ctf_strtab_iter_cb): New: tell libctf about each string in the strtab in turn. (ldelf_ctf_symbols_iter_cb): New, tell libctf about each symbol in the symtab in turn. * ldelfgen.h (struct elf_sym_strtab): Add forward. (struct elf_strtab_hash): Likewise. (struct ctf_file): Likewise. (ldelf_emit_ctf_early): Declare. (ldelf_examine_strtab_for_ctf): Likewise. * emultempl/elf-generic.em (LDEMUL_EMIT_CTF_EARLY): Set it. (LDEMUL_EXAMINE_STRTAB_FOR_CTF): Likewise. * emultempl/aix.em (ld_${EMULATION_NAME}_emulation): Add emit_ctf_early and examine_strtab_for_ctf, NULL by default. * emultempl/armcoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/beos.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/elf.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/linux.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/msp430.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pe.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/pep.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/ticoff.em (ld_${EMULATION_NAME}_emulation): Likewise. * emultempl/vanilla.em (ld_vanilla_emulation): Likewise. * Makefile.am: Pull in libctf (and zlib, a transitive requirement for compressed CTF section emission). Pass it on to DejaGNU. * configure.ac: Add AM_ZLIB. * aclocal.m4: Added zlib.m4. * Makefile.in: Regenerated. * testsuite/ld-bootstrap/bootstrap.exp: Use it when relinking ld.
2019-09-09Add markers for 2.33 branch to NEWS and ChangeLog files.Phil Blundell1-0/+4
2019-08-19Add --with-static-standard-libraries to the top levelTom Tromey1-0/+5
gdb should normally not be linked with -static-libstdc++. Currently this has not caused problems, but it's incompatible with catching an exception thrown from a shared library -- and a subsequent patch changes gdb to do just this. This patch adds a new --with-static-standard-libraries flag to the top-level configure. It defaults to "auto", which means enabled if gcc is being built, and disabled otherwise. ChangeLog 2019-08-19 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Add --with-static-standard-libraries.
2019-08-09Synchronize libiberty sources with gcc mainline.Nick Clifton1-0/+78
* libiberty: Sync with gcc. Bring in: 2019-08-08 Martin Liska <mliska@suse.cz> PR bootstrap/91352 * lrealpath.c (is_valid_fd): New function. 2019-07-24 Martin Liska <mliska@suse.cz> PR lto/91228 * simple-object-elf.c (simple_object_elf_copy_lto_debug_sections): Find first '\0' starting from gnu_lto + 1. 2019-07-12 Ren Kimura <rkx1209dev@gmail.com> * simple-object-elf.c (simple_object_elf_match): Check zero value shstrndx. This fixes a Bug 90924. 2019-07-22 Martin Liska <mliska@suse.cz> * simple-object-elf.c (simple_object_elf_copy_lto_debug_sections): Do not search for gnu_lto_v1, but search for first '\0'. 2019-07-18 Eduard-Mihai Burtescu <eddyb@lyken.rs> * cplus-dem.c: Include rust-demangle.h. * rust-demangle.c: Include rust-demangle.h. * rust-demangle.h: New file. 2019-05-31 Michael Forney <mforney@mforney.org> * cp-demangle.c: Don't define CP_DYNAMIC_ARRAYS if __STDC_NO_VLA__ is non-zero. 2019-04-30 Ben L <bobsayshilol@live.co.uk> * d-demangle.c (dlang_parse_assocarray): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_tuple): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_structlit): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_arrayliteral): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_integer): Fix stack underflow. * testsuite/d-demangle-expected: Add testcase. * cp-demangle (d_print_comp_inner): Guard against a NULL 'typed_name'. * testsuite/demangle-expected: Add testcase. * cp-demangle.c (d_encoding): Guard against NULL return values from d_right (dc). * testsuite/demangle-expected: Add testcase. 2019-04-29 Ben L <bobsayshilol@live.co.uk> * cp-demangle.c (d_expression_1): Don't peek ahead unless the current char is valid. * testsuite/demangle-expected: Add testcase. 2019-04-10 Nick Clifton <nickc@redhat.com> PR 89394 * cp-demangle.c (cplus_demangle_fill_name): Reject negative lengths. (d_count_templates_scopes): Replace num_templates and num_scopes parameters with a struct d_print_info pointer parameter. Adjust body of the function accordingly. Add recursion counter and check that the recursion limit is not reached. (d_print_init): Pass dpi parameter to d_count_templates_scopes. Reset recursion counter afterwards, unless the recursion limit was reached.
2019-07-13adjust src-release following the renaming of gdb/common/ to gdb/gdbsupport/Joel Brobecker1-0/+5
A recent change renamed the common/ directory into gdbsupport/ in gdb. This causes problems in the getver function in the src-release script which doesn't find the create-version.sh script anymore. As a result, it falls back on using the version.in file verbatim, meaning that the "DATE" placeholder doesn't get replaced with the snapshot date, and the "-git" suffix doesn't get stripped. More precisely, we get snapshots called "gdb-8.3.50-DATE-git.tar" instead of (e.g.) "gdb-8.3-20190712.tar". This commit fixes the issue by adding support for this situation. I left the support for $tool/common/create-version.sh, because the sim still uses that directory structure. ChangeLog: * src-release (getver): If $tool/gdbsupport/create-version.sh exists, use that to determine the version number.
2019-06-21Add gnulib to gdb release tarballAndreas Schwab1-0/+4
* src-release.sh (GDB_SUPPORT_DIRS): Add gnulib.
2019-06-14Move gnulib to top levelTom Tromey1-0/+9
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
2019-06-03Revert patch that disables building libctf for non-ELF based targets.Nick Clifton1-0/+9
Revert: binutls 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate. top 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate.
2019-05-30Revert "Sync top level files with versions from gcc."Nick Clifton1-27/+0
This reverts commit f948b2de97884bfb4e5fc11d40a6bea9e0b096ae.
2019-05-29Update release tools with libctf support.Nick Clifton1-0/+5
top * src-release.sh (do_proto_toplev): Add libctf to list of directories that can be disabled. binutils* README-how-to-make-a-release: Add libctf to list of directories that need updates in their ChangeLogs.
2019-05-29Sync top level files with versions from gcc.Nick Clifton1-0/+27
top * Makefile.def (target_modules): Add libphobos. (flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and GDCFLAGS_FOR_TARGET. (dependencies): Make libphobos depend on libatomic, libbacktrace configure, and zlib configure. (language): Add language d. * Makefile.in: Rebuild. * Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS. (HOST_EXPORTS): Add GDC. (POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD. (BASE_TARGET_EXPORTS): Add GDC. (GDC_FOR_BUILD, GDC, GDCFLAGS): New variables. (GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables. (EXTRA_HOST_FLAGS): Add GDC. (STAGE1_FLAGS_TO_PASS): Add GDC. (EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS. * config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag environment variables. * configure: Rebuild. * configure.ac: Add target-libphobos to target_libraries. Set and substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
2019-05-29Do not build libctf for targets that do not use the ELF file format.Nick Clifton1-0/+6
top * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate. binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate.
2019-05-29Fix libctf build on non-ELF targets.Nick Alcock1-0/+6
All machinery works as on ELF, except for automatic loading of ELF string and symbol tables in the BFD-style open machinery. * Makefile.def (dependencies): configure-libctf depends on all-bfd and all its deps. * Makefile.in: Regenerated. libctf/ * configure.in: Check for bfd_section_from_elf_index. * configure: Regenerate. * config.h.in [HAVE_BFD_ELF]: Likewise. * libctf/ctf_open_bfd (ctf_bfdopen_ctfsect): Use it. abfd is potentially unused now.
2019-05-28Add libctf to top-level MAINTAINERS; add myself as CTF maintainer.Nick Alcock1-0/+4
2019-05-28libctf: build systemNick Alcock1-0/+9
This ties libctf into the build system, and makes binutils depend on it (used by the next commits). * Makefile.def (host_modules): Add libctf. * Makefile.def (dependencies): Likewise. libctf depends on zlib, libiberty, and bfd. * Makefile.in: Regenerated. * configure.ac (host_libs): Add libctf. * configure: Regenerated. libctf/ * Makefile.am: New. * Makefile.in: Regenerated. * config.h.in: Likewise. * aclocal.m4: Likewise. * configure: Likewise.
2019-05-23config.guess,config.sub: synchronize with config project master sourcesJose E. Marchesi1-0/+7
This is to bring in the newly introduced support for bpf-*-* targets. ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * config.guess: Synchronize with config project master sources. * config.sub: Likewise. * readline/support/config.guess: Likewise. * readline/support/config.sub: Likewise.
2019-04-10Pull in patch for libiberty that fixes a stack exhaustion bug when ↵Nick Clifton1-0/+16
demangling a pathalogically constructed mangled name. PR 89394 * cp-demangle.c (cplus_demangle_fill_name): Reject negative lengths. (d_count_templates_scopes): Replace num_templates and num_scopes parameters with a struct d_print_info pointer parameter. Adjust body of the function accordingly. Add recursion counter and check that the recursion limit is not reached. (d_print_init): Pass dpi parameter to d_count_templates_scopes. Reset recursion counter afterwards, unless the recursion limit was reached.
2019-01-19Add markers for 2.32 branch to NEWS and ChangeLog files.Nick Clifton1-0/+4
2019-01-14Sync config.guess, config.sub from GCCRainer Orth1-0/+7
Merge from GCC: PR target/88535 * config.guess: Import upstream version 2019-01-03. * config.sub: Import upstream version 2019-01-01.
2019-01-10Sync libiberty sources with gcc master versions.Nick Clifton1-0/+21
. * libiberty: Sync with gcc. Bring in: 2019-01-09 Sandra Loosemore <sandra@codesourcery.com> PR other/16615 * cp-demangle.c: Mechanically replace "can not" with "cannot". * floatformat.c: Likewise. * strerror.c: Likewise. 2018-12-22 Jason Merrill <jason@redhat.com> Remove support for demangling GCC 2.x era mangling schemes. * cplus-dem.c: Remove cplus_mangle_opname, cplus_demangle_opname, internal_cplus_demangle, and all subroutines. (libiberty_demanglers): Remove entries for ancient GNU (pre-3.0), Lucid, ARM, HP, and EDG demangling styles. (cplus_demangle): Remove 'work' variable. Don't call internal_cplus_demangle. include * Merge from GCC: 2018-12-22 Jason Merrill <jason@redhat.com> * demangle.h: Remove support for ancient GNU (pre-3.0), Lucid, ARM, HP, and EDG demangling styles.
2019-01-07Revert "Sync libiberty sources with master version in gcc repository. ↵Simon Marchi1-4/+0
Updated stabs demangling and cxxfilt tests to match." The previous commit breaks the GDB build, which is still using functions cplus_demangle_opname & co. Since removing these usages is not an obvious fix, let's revert this patch until we get rid of them.
2019-01-07Sync libiberty sources with master version in gcc repository. Updated stabs ↵Nick Clifton1-0/+4
demangling and cxxfilt tests to match. PR 24044 * stabs.c (parse_stab_argtypes): Remove call to cplus_mangle_opcode. * testsuite/binutils-all/cxxfilt.exp: Replace tests of v2 encoding with v3 encoding. Add escape for known failures.
2019-01-03Don't build readline/libreadline.a, when --with-system-readline is suppliedДилян Палаузов1-0/+6
https://sourceware.org/bugzilla/show_bug.cgi?id=18632 The bundled libreadline is always built, even if the system is ./configure'd --with-system-readline and the build libreadline.a is not used. Proposed patch: Fix ./configure.ac not to proceed readline/, when --with-system- readline is provided
2018-10-31Merge autoconf / automake update changes from GCC.Joseph Myers1-0/+6
Top level: Merge from GCC: PR bootstrap/82856 * multilib.am: New file. From automake. config: Merge from GCC: PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. zlib: Merge from GCC. PR bootstrap/82856 * Makefile.am: Include multilib.am. * Makefile.in: Regenerate.
2018-09-13Add "contrib" to the list of GDB support dirs (on src-release.sh)Sergio Durigan Junior1-0/+4
On commit: commit 5a6996172e6294ea37054b1a9caa3a923a8fe399 Author: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> Date: Mon Aug 6 16:05:16 2018 +0200 Update dg-extract-results.* from gcc dg-extract-results.sh was moved from the "gdb/contrib/" directory to the toplevel "contrib/" directory. However, src-release.sh was not updated in order to include "contrib/" in the tarball release of GDB. This makes it very inconvenient to run and analyze the GDB testsuite results. This commit adds "contrib/" to the list of support directories that are included in each GDB release. ChangeLog: 2018-09-12 Sergio Durigan Junior <sergiodj@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add "contrib".
2018-07-16Update the src-release script to include the new top level files test-driver ↵Nick Clifton1-0/+4
and ar-lib. * src-release.sh (DEVO_SUPPORT): Add test-driver and ar-lib.
2018-07-06Update config.subSebastian Huber1-0/+4
* config.sub: Sync with upstream version 2018-07-03.
2018-07-05Update config.guess and config.subSebastian Huber1-0/+5
* config.guess: Sync with upstream version 2018-06-26. * config.sub: Sync with upstream version 2018-07-02.
2018-06-29Introduce @unless/@endunless and postbootstrap Makefile targetsAlexandre Oliva1-0/+12
This patch turns dependencies of non-bootstrap targets on bootstrap targets for bootstrap builds into dependencies on stage_last. This arrangement gets stage1-bubble to run from stage_last if we haven't started a bootstrap yet, and to use the current stage otherwise. This was already the case of target libs, just not of non-bootstrapped host modules. In order to retain preexisting dependencies in non-bootstrap builds, or in gcc-less builds, this introduces support for @unless/@endunless pairs in Makefile.in. There is a remaining possibility of problem if activating, in a tree configured for bootstrap, a parallel build of two or more modules, at least one bootstrapped and one not. In this case, make might decide to build stage_current and stage_last in parallel, the latter will start a submake to build stage1 while the initial make, having satisfied stage_current, proceeds to build the bootstrapped module in non-bootstrapped configurations. The two builds will overlap and will likely conflict. This situation does NOT arise in normal settings, however: a post-bootstrap build of all-host all-target will indeed activate such targets concurrently, but only after building all bootstrapped modules successfully, and it will have both stage_last and stage_current targets already satisfied, so the potential race between builds will not arise. Another remaining problem, that is slightly expanded with this patch, is that of an interrupted build in a tree configured for bootstrap, continued with a non-bootstrapped target. Target modules that were not bootstrapped would already fail to complete the current stage when activated explicitly in the command line for a retry; host modules, however, would attempt to build their bootstrapped dependencies, which is what led to the problem of concurrent builds addressed with this patch. An interrupted or failed build might still recover correctly, if the non-bootstrapped target is activated in both builds, because then make will remove stage_last when its build command is interrupted, so that it will attempt to recreate it with stage1-bubble in the second try. A bootstrap build, however, will not be attempting to build stage_last, so the file will remain and the retry won't go through stage1-bubble. We have lived with that for target modules, so we can probably live with that for host modules too. Another undesirable consequence of this change is that non-boostrapped host modules, in a tree configured for bootstrap, when activated as make all-<module>, will build all of stage1 instead of only the module's usual dependencies. This is intentional and necessary to fix the parallel-build problem. If it's not desirable, disabling the unnecessary bootstrap configuration will suffice to restore the original set of dependencies. for ChangeLog * configure.ac: Introduce support for @unless/@endunless. * Makefile.tpl (dep-kind): Rewrite with cond; return postbootstrap in some cases. (make-postboot-dep, postboot-targets): New. (dependencies): Do not output postbootstrap dependencies at first. Output non-target ones changed for configure to depend on stage_last @if gcc-bootstrap, and the original deps @unless gcc-bootstrap. * configure.in, Makefile.in: Rebuilt.
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton1-0/+4
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-0/+9
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-19Fix ChangeLog entryAndreas Schwab1-8/+0
2018-06-19readelf: Handle more RISC-V relocationsAndreas Schwab1-0/+8
* readelf.c (is_16bit_abs_reloc): Handle R_RISCV_SET16. (is_8bit_abs_reloc): New function. (is_6bit_abs_reloc): New function. (is_6bit_inplace_sub_reloc): New function. (apply_relocations): Use them. Handle 6-bit relocations.
2018-06-19This was already applied on the GCC side.Eric Botcazou1-0/+8
* Makefile.def (fortran): Add check-target-libgomp-fortran. * Makefile.tpl (check-target-libgomp-fortran): New phony target. * Makefile.in: Regenerate. * configure: Regenerate.
2018-06-18configure.ac: Sync with GCCSimon Marchi1-0/+4
Here's an extra one... I'll need to make some changes to the root configure.ac. This patch makes sure it is in sync with GCC first. ChangeLog: * configure.ac: Sync with GCC, remove MPX-related things.
generated by cgit v1.1 at 2024-11-19 20:26:55 +0000