| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR 28362
* testsuite/ld-pe/pe-run2-def.exp: New file.
|
|
Since commit b2d8657, having a per-interpreter event/command loop is not
possible anymore.
As Insight uses a GUI that has its own event loop, gdb and GUI event
loops have then to be "merged" (i.e.: work together). But this is
problematic as gdb_do_one_event is not aware of this alternate event
loop and thus may wait forever.
A solution is to delegate GUI events handling to the gdb events handler.
Insight uses Tck/Tk as GUI and the latter offers a "notifier" feature to
implement such a delegation. The Tcl notifier spec requires the event wait
function to support a timeout parameter. Unfortunately gdb_do_one_event
does not feature such a parameter.
This timeout cannot be implemented externally with a gdb timer, because
it would become an event by itself and thus can cause a legitimate event to
be missed if the timeout is 0.
Tcl implements "idle events" that are (internally) triggered only when no
other event is pending. For this reason, it can call the event wait function
with a 0 timeout quite often.
This patch implements a wait timeout to gdb_do_one_event. The initial
pending events monitoring is performed as before without the possibility
to enter a wait state. If no pending event has been found during this
phase, a timer is then created for the given timeout in order to re-use
the implemented timeout logic and the event wait is then performed.
This "internal" timer only limits the wait time and should never be triggered.
It is deleted upon gdb_do_one_event exit.
The new parameter defaults to "no timeout" (-1): as it is used by Insight
only, there is no need to update calls from the gdb source tree.
|
|
|
|
Emitting this warning for every insn, including ones having actual
errors, is annoying. Introduce a boolean variable to emit the warning
just once on the first insn after .arch may have changed the things, and
move the warning to output_insn(). (I didn't want to go as far as
checking whether the .arch actually turned off the i386 bit, but doing
so would be an option.)
|
|
The value of zero would better not indicate any error, but rather hit
the abort() at the top of the consuming switch().
|
|
|
|
Correctly report PARAM_ZUINTEGER_UNLIMITED rather than PARAM_ZUINTEGER
in testing a Python parameter of the PARAM_ZUINTEGER_UNLIMITED type.
|
|
objcopy of broken SHT_GROUP sections shouldn't write garbage.
* elf.c (bfd_elf_set_group_contents): If number of entries is
unexpected, fill out section with zeros.
|
|
Fix mmo_get_byte to return a fail-safe value, not just on the first
call with a read error but on subsequent calls too.
* mmo.c (mmo_get_byte): Return the fail-safe value on every
call after a read error.
|
|
* mmo.c (mmo_make_section): Alloc name using bfd_alloc. Use
bfd_error_no_memory.
(mmo_decide_section): Check for NULL return from mmo_make_section.
|
|
mmo_get_loc needs to handle arbitrary vma and size chunks. Fuzzers
found that it wasn't working so well when the end of chunks were
getting close to address wrap-around.
* mmo.c (mmo_get_loc): Make "size" unsigned. Avoid arithmetic
overflow when calculating whether range hits an existing chunk.
|
|
Swap params of is_note, so they are section, segment like others used
in rewrite_elf_program_header. Whitespace fixes, plus wrapping of
overlong lines.
|
|
|
|
In commit 68e80d96a84282d547f3b3c1234c99009521630c, the usage of
___lc_codepage_func was introduced to determine the current encoding.
Prior to version 9.0 of MinGW-w64, the function prototype for
___lc_codepage_func was missing and trying to build BFD caused the
following error:
error: implicit declaration of function ‘___lc_codepage_func’
This changeset adds a conditonal definition of
___lc_codepage_func to allow a sucessful build with MinGW-w64.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
|
|
When displaying operands, invalid opcodes may overflow operand buffer
due to additional styling characters. Each style is encoded with 3
bytes. Define MAX_OPERAND_BUFFER_SIZE for operand buffer size and
increase it from 100 bytes to 128 bytes to accommodate 9 sets of styles
in an operand.
gas/
PR binutils/29483
* testsuite/gas/i386/i386.exp: Run pr29483.
* testsuite/gas/i386/pr29483.d: New file.
* testsuite/gas/i386/pr29483.s: Likewise.
opcodes/
PR binutils/29483
* i386-dis.c (MAX_OPERAND_BUFFER_SIZE): New.
(obuf): Replace 100 with MAX_OPERAND_BUFFER_SIZE.
(staging_area): Likewise.
(op_out): Likewise.
|
|
I noticed that the gdb.arch/riscv-unwind-long-insn.exp test was
failing when run on a 64-bit RISC-V target.
The problem was that GDB was failing to stop after a finish command,
and was then running to an unexpected location.
The reason GDB failed to stop at the finish breakpoint was that the
frame-id of the inferior, when we reached the finish breakpoint,
didn't match the expected frame-id that was stored on the breakpoint.
The reason for this mismatch was that the assembler code that is
included in this test, was written only taking 32-bit RISC-V into
account, as a result, the $fp register was being corrupted, and this
was causing the frame-id mismatch.
Specifically, the $fp register would end up being sign-extended from
32 to 64 bits. If the expected $fp value has some significant bits
above bit 31 then the computed and expected frame-ids would not match.
To fix this I propose merging the two .s files into a single .S file,
and making use of preprocessor macros to specialise the file for the
correct size of $fp. There are plenty of existing tests that already
make use of preprocessor macros in assembler files, so I assume this
approach is fine.
Once I'd decided to make use of preprocessor macros to solve the 32/64
bit issue, then I figured I might as well merge the two test assembler
files, they only differed by a single instruction.
With this change in place I now see this test fully passing on 32 and
64 bit RISC-V targets.
|
|
Commit 9db0d8536dbc ("gdb/mi: fix breakpoint script field output") fixed
the output of the script key in the MI breakpoint output, from
script={"print 10","continue"}
to
script=["print 10","continue"]
However, it missed updating this test case, which still tests for the
old (broken) form, causing:
FAIL: gdb.mi/mi-break.exp: mi-mode=main: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output)
FAIL: gdb.mi/mi-break.exp: mi-mode=separate: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output)
Update the test to expect the new form.
Change-Id: I174919d4eea53e96d914ca9bd1cf6f01c8de30b8
|
|
When working on windows-nat.c, it's useful to see an error message in
addition to the error number given by GetLastError. This patch moves
strwinerror from gdbserver to gdbsupport, and then updates
windows-nat.c to use it. A couple of minor changes to strwinerror
(constify the return type and use the ARRAY_SIZE macro) are also
included.
|
|
This removes the deprecated register_gdbarch_init in favor a default
argument to gdbarch_register. Regression tested on x86-64 Fedora 34.
|
|
This patch, in order of significance:
1) Replaces some macros with inline functions.
2) Those inline functions catch and avoid arithmetic overflows when
comparing addresses.
3) When assigning sections to segments (IS_SECTION_IN_INPUT_SEGMENT)
use bed->want_p_paddr_set_to_zero to decide whether lma vs p_paddr
or vma vs p_vaddr should be tested. When remapping, use the same
test, and use is_note rather than the more restrictive
IS_COREFILE_NOTE.
It's important that the later tests not be more restrictive. If they
are it can lead to the situation triggered by the testcases, where a
section seemingly didn't fit and thus needed a new mapping. It didn't
fit the new mapping either, and this repeated until memory exhausted.
PR 29495
* elf.c (SEGMENT_END, SECTION_SIZE, IS_CONTAINED_BY_VMA): Delete.
(IS_CONTAINED_BY_LMA, IS_NOTE, IS_COREFILE_NOTE): Delete.
(segment_size, segment_end, section_size): New inline function.
(is_contained_by, is_note): Likewise.
(rewrite_elf_program_header): Use new functions.
|
|
Now that we can purge templates, let's use this to improve readability a
little by shortening a few of their names, making functionally similar
ones also have identical names in their multiple incarnations.
|
|
Many of the vector conversion insns come with X/Y/Z suffixed forms, for
disambiguation purposes in AT&T syntax. All of these gorups follow
certain patterns. Introduce "xy" and "xyz" templates to reduce
redundancy.
To facilitate using a uniform name for both AVX and AVX512, further
introduce a means to purge a previously defined template: A standalone
<name> will be recognized to have this effect.
Note that in the course of the conversion VFPCLASSPH is properly split
to separate AT&T and Intel syntax forms, matching VFPCLASSP{S,D} and
yielding the intended "ambiguous operand size" diagnostic in Intel mode.
|
|
Many of the vector integer insns come in byte/word element pairs. Most
of these pairs follow certain encoding patterns. Introduce a "bw"
template to reduce redundancy.
Note that in the course of the conversion
- the AVX VPEXTRW template which is not being touched needs to remain
ahead of the new "combined" ones, as (a) this should be tried first
when matching insns against templates and (b) its Load attributes
requires it to be first,
- this add a benign/meaningless IgnoreSize attribute to the memory form
of PEXTRB; it didn't seem worth avoiding this.
|
|
The AVX2 gather ones are nicely grouped - do the same for the various
AVX512 scatter/gather ones. On the moved lines also convert EVex=<n> to
EVex<N>.
|
|
Many of the vector integer insns come in dword/qword element pairs. Most
of these pairs follow certain encoding patterns. Introduce a "dq"
template to reduce redundancy.
Note that in the course of the conversion
- a few otherwise untouched templates are moved, so they end up next to
their siblings),
- drop an unhelpful Cpu64 from the GPR form of VPBROADCASTQ, matching
what we already have for KMOVQ - the diagnostic is better this way for
insns with multiple forms (i.e. the same Cpu64 attributes on {,V}MOVQ,
{,V}PEXTRQ, and {,V}PINSRQ are useful to keep),
- this adds benign/meaningless IgnoreSize attributes to the GPR forms of
KMOVD and VPBROADCASTD; it didn't seem worth avoiding this.
|
|
The vast majority of vector FP insns comes in single/double pairs. Many
pairs follow certain encoding patterns. Introduce an "sd" template to
reduce redundancy. Similarly, to further cover similarities between
AVX512F and AVX512-FP16, introduce an "sdh" template.
For element-size Disp8 shift generalize i386-gen's broadcast size
determination, allowing Disp8MemShift to be specified without an operand
in the affected templated templates. While doing the adjustment also
eliminate an unhelpful (lost information) diagnostic combined with a use
after free in what is now get_element_size().
Note that in the course of the conversion
- the AVX512F form of VMOVUPD has a stray (leftover) Load attribute
dropped,
- VMOVSH has a benign IgnoreSize added (the attribute is still strictly
necessary for VMOVSD, and necessary for VMOVSS as long as we permit
strange combinations like "-march=i286+avx"),
- VFPCLASSPH is properly split to separate AT&T and Intel syntax forms,
matching VFPCLASSP{S,D}.
|
|
This reverts commit 384f368958f2a5bb083660e58e5f8a010e6ad429, which
broke i386-gen's emitting of diagnostics. As a replacement to address
the original issue of newer gcc no longer splicing lines when dropping
the line continuation backslashes, switch to using + as the line
continuation character, doing the line splicing in i386-gen.
|
|
|
|
2022-08-16 Alan Modra <amodra@gmail.com>
Cunlong Li <shenxiaogll@163.com>
PR 29362
* dwarf.c (free_debug_information): New function, extracted..
(free_debug_memory): ..from here.
(process_debug_info): Use it when before clearing out unit
debug_information. Clear all fields.
* objcopy.c (delete_symbol_htabs): New function.
(main): Call it via xatexit.
(copy_archive): Free "dir".
* objdump.c (free_debug_section): Free reloc_info.
|
|
When kernel veriosn >= V4.x, the characteristic values used to
determine whether it is a signal function call are:
movi r7, 139
trap 0
Registers are saved at (sp + CSKY_SIGINFO_OFFSET + CSKY_SIGINFO_SIZE
+ CSKY_UCONTEXT_SIGCONTEXT + CSKY_SIGCONTEXT_PT_REGS_TLS). The order
is described in csky_linux_rt_sigreturn_init_pt_regs.
|
|
I know this target is just a skeleton, but let's not write out relocs
with uninitialised garbage.
* coff-aarch64.c (SWAP_IN_RELOC_OFFSET): Define.
(SWAP_OUT_RELOC_OFFSET): Define.
|
|
|
|
There's a comment in riscv-tdep.c that explains some of the background
about how we check for the fcsr, fflags, and frm registers within a
riscv target description.
This comment (and the functionality it describes) relates to how QEMU
advertises these registers within its target description.
Unfortunately, QEMU includes these three registers in both the fpu and
crs target description features. To work around this GDB uses one of
the register declarations, and ignores the other, this means the GDB
user sees a single copy of each register, and things just work.
When I originally wrote the comment I thought it didn't matter which
copy of the register GDB selected, the fpu copy or the csr copy, so
long as we just used one of them. The comment reflected this belief.
Upon further investigation, it turns out I was wrong. GDB has to use
the csr copy of the register. If GDB tries to use the register from
the fpu feature then QEMU will return an error when GDB tries to read
or write the register.
Luckily, the code within GDB (currently) will always select the csr
copy of the register, so nothing is broken, but the comment is wrong.
This commit updates the comment to better describe what is actually
going on.
Of course, I should probably also send a patch to QEMU to fix up the
target description that is sent to GDB.
|
|
After this commit:
commit 7b7c365c5c663ffdfb2b3f696db35c23cdccd921
Date: Wed Sep 15 10:10:46 2021 +0200
[bfd] Ensure unique printable names for bfd archs
The printable name field of the default nds32 bfd_arch_info changed
from 'n1h' to 'n1'. As a consequence the generated feature file
within GDB should have been recreated. Recreate it now.
|
|
breakpoint::decode_location_spec just asserts if called. It turned
out to be relatively easy to remove this method from breakpoint and
instead move the base implementation to code_breakpoint.
|
|
location_spec_to_sals is only ever called for code breakpoints, so
make it a protected method there.
|
|
breakpoint_re_set_default is only ever called from breakpoint re_set
methods, so make it a protected method on code_breakpoint.
|
|
|
|
PR 29482
* coffcode.h (coff_set_section_contents): Sanity check _LIB.
|
|
* elf32-spu.c (spu_elf_object_p): Don't dereference NULL
shdr->bfd_section.
|
|
* libhppa.h (sign_extend): Avoid undefined behaviour.
|
|
* som.c (som_set_reloc_info): Ignore non-existent previous
fixup references.
|
|
This changes readelf output a little, removing the 0x prefix on hex
output when the value is 0, except in cases where a fixed field
width is shown. %#010x is not a good replacement for 0x%08x.
|
|
This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with
uint64_t and int64_t everywhere. The patch also gets rid of
DWARF_VMA_FMT since we can't use that with uint64_t, and all of the
configure support for deciding the flavour of HOST_WIDEST_INT.
dwarf_vmatoa also disappears, replacing most uses with one of
PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values
now use %z and %t rather than by casting to unsigned long. Also,
most warning messages that used 0x%lx or similar now use %#lx and a
few that didn't print the 0x hex prefix now also use %#. The patch
doesn't change normal readelf output, except in odd cases where values
previously might have been truncated.
|
|
This replaces bfd_vma with uint64_t in readelf, defines BFD64
unconditionally, removes tests of BFD64 and sizeof (bfd_vma), and
removes quite a few now unnecessary casts.
|
|
Replacing bfd_size_type with dwarf_size_type or uint64_t is mostly
cosmetic. The point of the change is to avoid use of a BFD type
in readelf, where we'd like to keep as independent of BFD as
possible. Also, the patch is a step towards using standard types.
|
|
This patch replaces all uses of elf_vma with uint64_t, removes
tests of sizeof (elf_vma), and does a little tidying of
byte_get_little_endian and byte_get_big_endian.
|
|
|
|
When running test-case gdb.dwarf2/dw2-dir-file-name.exp on x86_64-linux, we
have:
...
(gdb) break compdir_missing__ldir_missing__file_basename^M
Breakpoint 2 at 0x4004c4: file tmp-dw2-dir-file-name.c, line 999.^M
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, 0x00000000004004c4 in \
compdir_missing__ldir_missing__file_basename () \
at tmp-dw2-dir-file-name.c:999^M
(gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \
compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
compdir_missing__ldir_missing__file_basename
...
When trying to set a breakpoint on
compdir_missing__ldir_missing__file_basename, the architecture-specific
prologue skipper starts at 0x4004c0 and skips past two insns, to 0x4004c4:
...
00000000004004c0 <compdir_missing__ldir_missing__file_basename>:
4004c0: 55 push %rbp
4004c1: 48 89 e5 mov %rsp,%rbp
4004c4: 8b 05 72 1b 20 00 mov 0x201b72(%rip),%eax # 60203c <v>
4004ca: 83 c0 01 add $0x1,%eax
4004cd: 89 05 69 1b 20 00 mov %eax,0x201b69(%rip) # 60203c <v>
4004d3: 90 nop
4004d4: 5d pop %rbp
4004d5: c3 ret
...
And because the line table info is rudamentary:
...
CU: tmp-dw2-dir-file-name.c:
File name Line number Starting address View Stmt
tmp-dw2-dir-file-name.c 999 0x4004c0 x
tmp-dw2-dir-file-name.c 1000 0x4004d6 x
tmp-dw2-dir-file-name.c - 0x4004d6
...
the address does not fall at an actual line, so the breakpoint is shown with
address, both when setting it and hitting it.
when running the test-case with aarch64-linux, we have similarly:
...
(gdb) break compdir_missing__ldir_missing__file_basename^M
Breakpoint 2 at 0x400618: file tmp-dw2-dir-file-name.c, line 999.^M
...
due to the architecture-specific prologue skipper starting at 0x400610 and
skipping past two insns, to 0x400618:
...
0000000000400610 <compdir_missing__ldir_missing__file_basename>:
400610: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17>
400614: 9100b000 add x0, x0, #0x2c
400618: b9400000 ldr w0, [x0]
40061c: 11000401 add w1, w0, #0x1
400620: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17>
400624: 9100b000 add x0, x0, #0x2c
400628: b9000001 str w1, [x0]
40062c: d503201f nop
400630: d65f03c0 ret
...
But interestingly, the aarch64 architecture-specific prologue skipper is
wrong. There is no prologue, and the breakpoint should be set at 0x400610.
By using "break *compdir_missing__ldir_missing__file_basename"
we can get the breakpoint set at 0x400610:
...
(gdb) break *compdir_missing__ldir_missing__file_basename^M
Breakpoint 2 at 0x400610: file tmp-dw2-dir-file-name.c, line 999.^M
...
and make the test-case independent of prologue analysis.
This requires us to update the expected patterns.
The fix ensures that once the aarch64 architecture-specific prologue skipper
will be fixed, this test-case won't start failing.
Tested on x86_64-linux.
|
|
|
