aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-01gdb/Jan Kratochvil4-7/+60
PR libc/11214: * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New. (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU]. (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New. gdb/testsuite/ PR libc/11214: * gdb.threads/current-lwp-dead.c: Include features.h. (HAS_NOMMU): New. (fn, main): Move CLONE_VM into [__UCLIBC__ && HAS_NOMMU].
2010-02-01 * i386-tdep.c (i386_frame_cache): Assume valid anonymousDaniel Jacobowitz2-1/+19
functions use a frame pointer.
2010-02-01gdb/Jan Kratochvil6-3/+84
* solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert by a conditional setting DYN_ADDR. Use DYN_ADDR. * config/djgpp/fnchange.lst: Add translations for symbol-without-target_section.exp and symbol-without-target_section.c. gdb/testsuite/ * gdb.base/symbol-without-target_section.exp, gdb.base/symbol-without-target_section.c: New.
2010-02-01 * gdb.base/bigcore.exp: Reset increased timeout.Daniel Jacobowitz3-0/+7
* gdb.base/interrupt.exp: Match unexpected gdb prompt.
2010-02-01 * gdb.base/gcore.exp (capture_command_output): UseDaniel Jacobowitz2-5/+6
gdb_test_multiple.
2010-02-01 * gdbarch.sh: Set LANG and LC_ALL to C, not c.Daniel Jacobowitz3-5/+10
(remote_breakpoint_for_pc): Correct invalid_p check. * gdbarch.c: Regenerated.
2010-02-01 * arm-tdep.c (arm_find_mapping_symbol): New function, fromDaniel Jacobowitz5-18/+308
arm_pc_is_thumb. (arm_pc_is_thumb): Use arm_find_mapping_symbol. (extend_buffer_earlier): New function. (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants. (arm_adjust_breakpoint_address): New function. (arm_gdbarch_init): Register arm_adjust_breakpoint_address. testsuite/ * gdb.arch/thumb2-it.S (it_breakpoints): New function. * gdb.arch/thumb2-it.exp (test_it_break): New function. (Top level): Call it.
2010-02-01 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)Daniel Jacobowitz9-11/+494
(arm_linux_thumb2_le_breakpoint): New constants. (arm_linux_init_abi): Set thumb2_breakpoint and thumb2_breakpoint_size. * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions. (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE. Implement support for single stepping through IT blocks if a 32-bit Thumb breakpoint instruction is available. (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction is available, use it when needed. (arm_remote_breakpoint_from_pc): New function. (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc. * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint comment. Add thumb2_breakpoint and thumb2_breakpoint_size. gdbserver/ * linux-arm-low.c (thumb_breakpoint_len): Delete. (thumb2_breakpoint): New. (arm_breakpoint_at): Check for Thumb-2 breakpoints. testsuite/ * gdb.arch/thumb2-it.S, gdb.arch/thumb2-it.exp: New files.
2010-02-01 * arch-utils.c (default_remote_breakpoint_from_pc): New function.Daniel Jacobowitz9-28/+123
* arch-utils.h (default_remote_breakpoint_from_pc): Declare. * gdbarch.c, gdbarch.h: Regenerated. * gdbarch.sh (remote_breakpoint_from_pc): New architecture method. * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use gdbarch_remote_breakpoint_from_pc. doc/ * gdb.texinfo (Architecture-Specific Protocol Details): New section. Document ARM breakpoint types. (Register Packet Format): Move into the new section. (Packets): Describe the KIND argument for Z0, z0, Z1, and z1 packets.
2010-02-012010-02-01 Tristan Gingold <gingold@adacore.com>Tristan Gingold2-0/+5
* som.c (som_write_ar_hdr): Define this macro.
2010-02-01Fix testsuite for Thumb2 jump reloc veneers.Ramana Radhakrishnan6-0/+86
2010-02-01 Matthew Gretton-Dann <matthew.gretton-dann@arm.com> * ld-arm/jump-reloc-veneers-long.d: New test. * ld-arm/jump-reloc-veneers-short1.d: Likewise. * ld-arm/jump-reloc-veneers-short2.d: Likewise. * ld-arm/jump-reloc-veneers.s: Likewise. * ld-arm/arm-elf.exp (armelftests): Run them.
2010-02-01 * objcopy.c (copy_object): Set SEC_LINKER_CREATED when addingNathan Sidwell5-1/+29
sections. testsuite/ * binutils-all/note-1.d: New. * binutils-all/objcopy.exp: Add it.
2010-02-01*** empty log message ***gdbadmin1-1/+1
2010-01-31daily updateAlan Modra1-1/+1
2010-01-31 * configure.ac: Add "recommended" version checks for GMP/MPC.Kaveh Ghazi3-20/+94
Update recommended GMP/MPFR/MPC versions. * configure: Regenerate.
2010-01-31*** empty log message ***gdbadmin1-1/+1
2010-01-30daily updateAlan Modra1-1/+1
2010-01-30binutils/testsuite/ChangeLog:Dave Korn8-7/+10
* binutils-all/windres/html.rc: Don't xfail x86_64-*-mingw*. * binutils-all/windres/lang.rc: Likewise. * binutils-all/windres/messagetable.rc: Likewise. * binutils-all/windres/strtab1.rc: Likewise. * binutils-all/windres/strtab2.rc: Likewise. * binutils-all/windres/version.rc: Likewise. * binutils-all/windres/version_cat.rc: Likewise.
2010-01-30 * elf32-hppa.c (final_link_relocate): Convert R_PARISC_TLS_GD21L,Dave Anglin2-4/+15
R_PARISC_TLS_LDM21L and R_PARISC_TLS_IE21L relocations that use the linkage table pointer to use the global table pointer if not doing a shared link.
2010-01-302010-01-29 Viktor Kutuzov <vkutuzov@accesssoftek.com>Doug Kwan2-3/+146
* gold/arm.cc: Added support for the ARM relocations: R_ARM_THM_PC8, R_ARM_THM_PC12, R_ARM_THM_ALU_PREL_11_0. (Arm_relocate_functions::thm_alu11): New Method. (Arm_relocate_functions::thm_pc8): New Method. (Arm_relocate_functions::thm_pc12): New Method. (Target_arm::Scan::local): Handle the relocations. (Target_arm::Scan::global): Likewise. (Target_arm::Relocate::relocate): Likewise. (Target_arm:Relocatable_size_for_reloc::get_size_for_reloc): Likewise.
2010-01-302010-01-29 Doug Kwan <dougkwan@google.com>Doug Kwan2-22/+7
* arm.cc (Target_arm::Scan::global): General PLTs for the same set of relocation types as ld.
2010-01-30*** empty log message ***gdbadmin1-1/+1
2010-01-29daily updateAlan Modra1-1/+1
2010-01-292010-01-29 Doug Kwan <dougkwan@google.com>Doug Kwan2-148/+26
* arm.cc (Arm_relocate_functions::arm_branch_common) Change visibility to public. (Arm_relocate_functions::thumb_branch_common): Ditto. (Arm_relocate_functions::thm_call, Arm_relocate_functions::thm_jump24, Arm_relocate_functions::thm_xpc22, Arm_relocate_functions::plt32, Arm_relocate_functions::xpc25, Arm_relocate_functions::call, Arm_relocate_functions::jump24): Remove. (Target_arm::Relocate::relocate): Adjust code to call Arm_relocation_functions::arm_branch_common and Arm_relocation_functions::thumb_branch_common instead of their removed wrappers. Merge switch-cases together to reduce source code size.
2010-01-292010-01-29 Doug Kwan <dougkwan@google.com>Doug Kwan3-6/+169
* arm.cc (Arm_relobj::Arm_relobj): Initialize new data member output_local_symbol_count_needs_update_. (Arm_relobj::output_local_symbol_count_needs_update, Arm_relobj::set_output_local_symbol_count_needs_update, Arm_relobj::update_output_local_symbol_count): New methods. (Arm_relobj::output_local_symbol_count_needs_update_): New data member. (Arm_exidx_cantunwind::do_fixed_endian_write): Write address of pointed function as in a R_ARM_PREL31 relocation. (Arm_output_section<big_endian>::fix_exidx_coverage): Mark objects for output local symbol count updating. (Target_arm::do_relax): Update output local symbol counts in objects if necessary. * object.h (Sized_relobj::set_output_local_symbol_count): New method.
2010-01-29 gas/testsuite/Daniel Jacobowitz8-58/+212
* gas/arm/dis-data.d: Update test name. Do not expect .word output. * gas/arm/dis-data2.d, gas/arm/dis-data2.s, gas/arm/dis-data3.d, gas/arm/dis-data3.s: New tests. opcodes/ * opcodes/arm-dis.c (struct arm_private_data): New. (print_insn_coprocessor, print_insn_arm): Update to use struct arm_private_data. (is_mapping_symbol, get_map_sym_type): New functions. (get_sym_code_type): Check the symbol's section. Do not check mapping symbols. (print_insn): Default to disassembling ARM mode code. Check for mapping symbols separately from other symbols. Use struct arm_private_data.
2010-01-29 PR 11136Nick Clifton5-5/+29
* config/tc-arm.c (neon_check_type): Handle a neon_shape value of NS_NULL. * gas/arm/neon-omit.s: Add instruction that causes crash. * gas/arm/neon-omit.d: Add expected disassembly.
2010-01-29 * arm.cc: Added support for the ARM relocations:Ian Lance Taylor2-34/+147
R_ARM_MOVW_BREL_NC, R_ARM_MOVT_BREL, R_ARM_MOVW_BREL, R_ARM_THM_MOVW_BREL_NC, R_ARM_THM_MOVT_BREL, R_ARM_THM_MOVW_BREL. (Arm_relocate_functions::movw_rel_nc): Renamed (was movw_prel_nc). (Arm_relocate_functions::movw_rel): New method. (Arm_relocate_functions::movt_rel): Renamed (was movt_prel). (Arm_relocate_functions::thm_movw_rel_nc): Renamed (was thm_movw_prel_nc). (Arm_relocate_functions::thm_movw_rel): New method. (Arm_relocate_functions::thm_movt_rel): Renamed (was thm_movt_prel). (Target_arm::Scan::local): Handle MOVW_BREL/MOVT_BREL relocations. (Target_arm::Scan::global): Likewise. (Target_arm::Relocate::relocate): Likewise. (Target_arm::Relocatable_size_for_reloc::get_size_for_reloc): Likewise.
2010-01-29 * infrun.c (prepare_to_proceed): Handle other signals which mightDaniel Jacobowitz4-26/+58
match a breakpoint. (handle_inferior_event): Move the check for unusual breakpoint signals earlier. gdbserver/ * linux-low.c (get_stop_pc): Check for SIGTRAP. (linux_wait_for_event_1): Handle SIGILL and SIGSEGV as possible breakpoints.
2010-01-29 * gdb.base/call-strs.exp, gdb.base/default.exp,Daniel Jacobowitz17-18/+55
gdb.base/ending-run.exp, gdb.base/finish.exp, gdb.base/funcargs.exp, gdb.base/huge.exp, gdb.base/nodebug.exp, gdb.base/ptype.exp, gdb.base/restore.exp, gdb.base/return.exp, gdb.base/setvar.exp, gdb.base/watchpoints.exp, gdb.threads/gcore-thread.exp, gdb.base/watchpoint-solib.exp: Save and restore timeout. * gdb.base/ending-run.exp: Correct restore of timeout. * gdb.base/page.exp: Remove unnecessary timeout setting.
2010-01-29amd64 - function returning record with field straddling 2 registersJoel Brobecker7-0/+166
gdb/ChangeLog: From Paul Hilfinger <hilfinger@adacore.com> * amd64-tdep.c (amd_classify_aggregate): Handle the case of a record of length <= 16 in which a field straddles the two eightbytes. gdb/testsuite/ChangeLog: * gdb.ada/rec_return: New testcase.
2010-01-29Implement return values on amd64-windows.Joel Brobecker2-1/+64
* amd64-windows-tdep.c: #include gdbcore.h and regcache.h. (amd64_windows_return_value): New function. (amd64_windows_init_abi): Call set_gdbarch_return_value with amd64_windows_return_value.
2010-01-29amd64-windows: 32 bytes allocated on stack by caller for integer parameter ↵Joel Brobecker4-4/+32
registers * i386-tdep.h (struct gdbarch_tdep): Add new field integer_param_regs_saved_in_caller_frame. * amd64-windows-tdep.c (amd64_windows_init_abi): Set tdep->integer_param_regs_saved_in_caller_frame to 1. * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on stack if tdep->integer_param_regs_saved_in_caller_frame is set.
2010-01-29Add summary line to the second to last entry.Joel Brobecker1-0/+1
2010-01-29amd64-windows: memory args passed by pointer during function calls.Joel Brobecker4-4/+52
* i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer. * amd64-tdep.c (amd64_push_arguments): Add handling of architectures where tdep->memory_args_by_pointer is non-zero. * amd64-windows-tdep.c (amd64_windows_init_abi): Set tdep->memory_args_by_pointer to 1.
2010-01-29amd64: Integer parameters in function calls on Windows.Joel Brobecker10-31/+269
gdb/ChangeLog: * i386-tdep.h (enum amd64_reg_class): New, moved here from amd64-tdep.c. (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs, call_dummy_integer_regs, and classify. * amd64-tdep.h (amd64_classify): Add declaration. * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant. (amd64_reg_class): Delete, moved to i386-tdep.h. (amd64_classify): Make non-static. Move declaration to amd64-tdep.h. Replace call to amd64_classify by call to tdep->classify. (amd64_push_arguments): Get the list of registers to use for passing integer parameters from the gdbarch tdep structure, rather than using a hardcoded one. Replace calls to amd64_classify by calls to tdep->classify. (amd64_push_dummy_call): Get the register number used for the "hidden" argument from tdep->call_dummy_integer_regs. (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs and tdep->call_dummy_integer_regs. Set tdep->classify. * amd64-windows-tdep.c: Add include of gdbtypes.h. (amd64_windows_dummy_call_integer_regs): New static global. (amd64_windows_classify): New function. (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs tdep->call_dummy_integer_regs and tdep->classify. gdb/testsuite/ChangeLog: * gdb.ada/call_pn: New testcase.
2010-01-29core files: wrong signal number with threaded program on sparc-solaris.Joel Brobecker2-1/+9
* elf.c (elfcore_grok_lwpstatus): Do not overwrite the core signal if it has already been set.
2010-01-29*** empty log message ***gdbadmin1-1/+1
2010-01-28daily updateAlan Modra1-1/+1
2010-01-28 * gdb.mi/mi-nonstop.exp (mi_nonstop_resume): New function.Daniel Jacobowitz3-8/+28
(Top level): Use it to resume. * lib/mi-support.exp (mi_send_resuming_command_raw): Recognize the Thumb mode displaced stepping error as unsupported.
2010-01-28 * regcache.c (regcache_xmalloc): Add aspace argument. Use itDaniel Jacobowitz6-13/+26
for the new regcache. All callers updated. (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here. (get_thread_arch_regcache): Do not set aspace here. * regcache.h (regcache_xmalloc): Update declaration. * frame.c, infcall.c, ppc-linux-tdep.c: Calls to regcache_xmalloc updated.
2010-01-28 * gas/pe/section-align-1.d: Don't test section flags.Dave Korn3-25/+30
* gas/pe/section-align-2.d: Likewise.
2010-01-282010-01-28 Sami Wagiaalla <swagiaal@redhat.com>Sami Wagiaalla5-65/+263
* gdb.cp/nsusing.exp: Added more tests. * gdb.cp/nsrecurs.exp: Ditto. * gdb.cp/nsusing.cc: Added test functions. * gdb.cp/nsrecurs.cc: Ditto.
2010-01-28Allow VL=1 on scalar FMA instructions.H.J. Lu10-13/+842
gas/testsuite/ 2010-01-28 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/fma-scalar-intel.d: New. * gas/i386/fma-scalar.d: Likewise. * gas/i386/fma-scalar.s: Likewise. * gas/i386/x86-64-fma-scalar-intel.d: Likewise. * gas/i386/x86-64-fma-scalar.d: Likewise. * gas/i386/x86-64-fma-scalar.s: Likewise. * gas/i386/i386.exp: Run fma-scalar, fma-scalar-intel, x86-64-fma-scalar and x86-64-fma-scalar-intel. opcodes/ 2010-01-28 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (EXVexWdqScalar): New. (vex_scalar_w_dq_mode): Likewise. (prefix_table): Update entries for PREFIX_VEX_3899, PREFIX_VEX_389B, PREFIX_VEX_389D, PREFIX_VEX_389F, PREFIX_VEX_38A9, PREFIX_VEX_38AB, PREFIX_VEX_38AD, PREFIX_VEX_38AF, PREFIX_VEX_38B9, PREFIX_VEX_38BB, PREFIX_VEX_38BD and PREFIX_VEX_38BF. (intel_operand_size): Handle vex_scalar_w_dq_mode. (OP_EX): Likewise.
2010-01-28 PR 11225Nick Clifton7-30/+115
* objdump.c (only): Replace with linked list. (only_size, only_used): Replace with only_list. (process_section_p): Set seen field on matches sections. (add_only): New function. (free_only_list): New function. (disassemble_section): Check only_list. (main): Use add_only and free_only_list. * gas/pe/aligncomm-c.d: Dump all sections. * ld-sh/refdbg-0-dso.d: Dump all sections.
2010-01-28Another -Wunused-function error in procfs.c (sparc-solaris)Joel Brobecker2-129/+139
* procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up. Only define if SYS_syssgi is defined. (remove_dbx_link_breakpoint): Delete declaration. Move up. (dbx_link_addr, insert_dbx_link_bpt_in_file) (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi is itself defined.
2010-01-28*** empty log message ***gdbadmin1-1/+1
2010-01-27daily updateAlan Modra1-1/+1
2010-01-27gas/ChangeLog:Dave Korn10-0/+143
* NEWS: Mention new feature. * config/obj-coff.c (obj_coff_section): Accept digits and use to override default section alignment power if specified. * doc/as.texinfo (.section directive): Update documentation. gas/testsuite/ChangeLog: * gas/pe/section-align-1.s: New test source file. * gas/pe/section-align-1.d: Likewise control script. * gas/pe/section-align-2.s: Likewise ... * gas/pe/section-align-2.d: ... and likewise. * gas/pe/pe.exp: Invoke new testcases.
2010-01-27gdb/testsuite/Jan Kratochvil2-4/+10
* gdb.base/break-interp.exp: Use [file tail $filename] to omit any absolute directory pathnames in gdb.sum file.