| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When running the testsuite in an enviroment that simulates a stressed system,
I ran into a timeout in test-case gdb.fortran/info-types.exp:
...
(gdb) info types^M
FAIL: gdb.fortran/info-types.exp: info types (timeout)
...
This is mainly due the presence of glibc debug info.
With it installed, I get:
...
$ time gdb -q -batch -x outputs/gdb.fortran/info-types/gdb.in.1 > /dev/null
real 0m35.969s
user 0m38.231s
sys 0m1.007s
...
and without:
...
$ time gdb -q -batch -x outputs/gdb.fortran/info-types/gdb.in.1 > /dev/null
real 0m4.782s
user 0m5.014s
sys 0m0.304s
...
Fix this by not running to main, which gets us:
...
$ time gdb -q -batch -x outputs/gdb.fortran/info-types/gdb.in.1 > /dev/null
real 0m0.808s
user 0m0.789s
sys 0m0.137s
...
Likewise in gdb.mi/mi-sym-info.exp and gdb.mi/mi-complete.exp.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Spotted a comment in code_breakpoint::re_set_default that was added in
commit:
commit 6cce025114ccd0f53cc552fde12b6329596c6c65
Date: Fri Mar 3 19:03:15 2023 +0000
gdb: only insert thread-specific breakpoints in the relevant inferior
that was incorrect. The comment was not updated to take inferior
specific breakpoints into account.
This commit just updates the comment, there's no user visible changes
after this commit.
|
|
Plus the others that are grouped there.
|
|
Even more so than image relative (RVA) relocations, section relative
ones as well as section ones should not have base relocations created in
the final PE image. Reportedly section relative relocations will want
using for TLS support in the (Windows) compiler.
While there also correct the names for two of the "image base" relocs.
|
|
|
|
d774bf9b3623239a1cfa729afcf048a15da657d3 for non-ELF x86 targets
|
|
The test-case gdb.threads/signal-sigtrap.exp:
- installs a signal handler called sigtrap_handler for SIGTRAP,
- sets a breakpoint on sigtrap_handler, and
- expects the breakpoint to trigger after issuing "signal SIGTRAP".
Usually, that happens indeed:
...
(gdb) signal SIGTRAP^M
Continuing with signal SIGTRAP.^M
^M
Thread 1 "signal-sigtrap" hit Breakpoint 2, sigtrap_handler (sig=5)^M
28 }^M
(gdb) PASS: $exp: sigtrap thread 1: signal SIGTRAP reaches handler
...
Occasionally, I run into this failure on openSUSE Tumbleweed:
...
(gdb) signal SIGTRAP^M
Continuing with signal SIGTRAP.^M
^M
Thread 1 "signal-sigtrap" received signal SIGTRAP, Trace/breakpoint trap.^M
__pthread_create_2_1 () at pthread_create.c:843^M
(gdb) FAIL: $exp: sigtrap thread 1: signal SIGTRAP reaches handler
...
AFAIU, the problem is in the situation that is setup before issuing that
command, by running to a breakpoint in thread_function:
...
void *thread_function (void *arg) {
return NULL;
}
int main (void) {
pthread_t child_thread;
signal (SIGTRAP, sigtrap_handler);
pthread_create (&child_thread, NULL, thread_function, NULL);
pthread_join (child_thread, NULL);
return 0;
}
...
In the passing case, thread 2 is stopped in thread_function, and thread 1 is
stopped somewhere in pthread_join:
...
(gdb) info threads^M
Id Target Id Frame ^M
1 Thread ... (LWP ...) "signal-sigtrap" __futex_abstimed_wait_common64 ()
* 2 Thread ... (LWP ...) "signal-sigtrap" thread_function ()
...
In the failing case, thread 2 is stopped in thread_function, but thread 1 is
stopped somewhere in pthread_create:
...
(gdb) info threads^M
Id Target Id Frame ^M
1 Thread ... (LWP ...) "signal-sigtrap" __GI___clone3 ()
* 2 Thread ... (LWP ...) "signal-sigtrap" thread_function ()
...
What I think happens is that pthread_create blocks SIGTRAP at some point, and
if the "signal SIGTRAP" command is issued while that is the case, the signal
becomes pending and consequently there's no longer a guarantee that the signal
will be delivered to the inferior.
Instead the signal will be handled by gdb like this:
...
(gdb) info signals SIGTRAP
Signal Stop Print Pass to program Description
SIGTRAP Yes Yes No Trace/breakpoint trap
...
Fix this by adding a barrier that ensures that pthread_create is done before
we issue the "signal SIGTRAP" command.
Likewise in test-case gdb.threads/signal-command-handle-nopass.exp.
Using the fixed test-case, I tested my theory by explicitly blocking SIGTRAP:
...
+ sigset_t old_ss, new_ss;
+ sigemptyset (&new_ss);
+ sigaddset (&new_ss, SIGTRAP);
+ sigprocmask (SIG_BLOCK, &new_ss, &old_ss);
+
/* Make sure that pthread_create is done once the breakpoint on
thread_function triggers. */
pthread_barrier_wait (&barrier);
pthread_join (child_thread, NULL);
+ sigprocmask (SIG_SETMASK, &old_ss, NULL);
...
and managed to reproduce the same failure:
...
(gdb) signal SIGTRAP^M
Continuing with signal SIGTRAP.^M
[Thread 0x7ffff7c00700 (LWP 13254) exited]^M
^M
Thread 1 "signal-sigtrap" received signal SIGTRAP, Trace/breakpoint trap.^M
0x00007ffff7c80056 in __GI___sigprocmask () sigprocmask.c:39^M
(gdb) FAIL: $exp: sigtrap thread 1: signal SIGTRAP reaches handler
...
Tested on x86_64-linux.
PR testsuite/26867
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26867
|
|
After doing pre-commit testing of some patch on arm-linux, the Linaro CI
reported:
...
FAIL: 1 regressions: 1 improvements
regressions.sum:
=== gdb tests ===
Running gdb:gdb.base/return.exp ...
ERROR: no fileid for ccd235fdc9bf
improvements.sum:
=== gdb tests ===
Running gdb:gdb.base/return.exp ...
ERROR: no fileid for 017e9b314c5a
...
The problem is the call to allow_float_test. It calls gdb_exit (for arm-linux
only), and consequently kills the gdb instance setup by prepare_for_testing:
...
if { [prepare_for_testing "failed to prepare" "return"] } {
return -1
}
set allow_float_test [allow_float_test]
...
Fix this by moving the call to allow_float_test to before prepare_for_testing.
Tested on arm-linux and x86_64-linux.
|
|
I noticed that introducing a typo here in gdb.mi/mi-breakpoint-changed.exp:
...
set bp_re [mi_make_breakpoint \
- -number $bp_nr \
+ -nunber $bp_nr \
-type dprintf \
-func marker \
-script [string_to_regexp {["printf \"arg\" \""]}]]
...
didn't make the test fail.
Proc mi_make_breakpoint uses parse_args, but does not check the remaining args
as parse_args suggests:
...
proc parse_args { argset } {
parse_list 2 args $argset "-" false
# The remaining args should be checked to see that they match the
# number of items expected to be passed into the procedure
}
...
We could add the missing check in mi_make_breakpoint, but I think the problem
is likely to occur again because the name parse_args does not suggest that
further action is required.
Fix this instead by:
- copying proc parse_args to new proc parse_some_args,
- adding new proc check_no_args_left, and
- calling check_no_args_left in parse_args.
Also be more strict in a few places where we do lassign for remaining args:
...
lassign $args a b
...
There may be more arguments left in $args, so check that that's not the case
using check_no_args_left:
...
set args [lassign $args a b]
check_no_args_left
...
Fix a few test-cases that trigger on the stricter checking.
Tested on x86_64-linux.
Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
PR testsuite/32129
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32129
|
|
On aarch64-linux (debian testing) with test-case
gdb.base/empty-host-env-vars.exp I ran into:
...
(gdb) show index-cache directory^M
The directory of the index cache is "/home/linux/.cache/gdb".^M
(gdb) FAIL: $exp: env_var_name=HOME: show index-cache directory
...
Without changing any environment variables, the value of the index-cache dir
is:
...
$ gdb -q -batch -ex "show index-cache directory"
The directory of the index cache is "/home/linux/.cache/gdb".
...
and the expectation of the test-case is that setting HOME to empty will
produce an empty dir, but what it actually produces is:
...
$ HOME= gdb -q -batch -ex "show index-cache directory"
The directory of the index cache is "/home/linux/.cache/gdb".
...
There's nothing wrong with that behaviour, the dir is simply constructed using
XDG_CACHE_HOME which happens to be explictly set to its default value
$HOME/.cache [1]:
...
$ echo $XDG_CACHE_HOME
/home/linux/.cache
...
and indeed also setting that variable to empty gets us the expected empty dir:
...
$ XDG_CACHE_HOME= HOME= gdb -q -batch -ex "show index-cache directory"
gdb: warning: Couldn't determine a path for the index cache directory.
The directory of the index cache is "".
...
Furthermore, the test-case assumption that setting variables to empty either
produces the original dir or an empty dir is incorrect.
Say that XDG_CACHE_HOME has a non-default value:
...
$ echo $XDG_CACHE_HOME
/home/linux/my-xdg-cache-home
$ gdb -q -batch -ex "show index-cache directory"
The directory of the index cache is "/home/linux/my-xdg-cache-home/gdb".
...
then setting that variable to empty:
...
$ XDG_CACHE_HOME= gdb -q -batch -ex "show index-cache directory"
The directory of the index cache is "/home/linux/.cache/gdb".
...
does change the value of the dir.
Fix this by making the test-case less specific.
While we're at it, factor out regexps re_pre and re_post to make regexps more
readable, and use string_to_regexp to reduce quoting.
Tested on aarch64-linux.
PR testsuite/32132
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32132
[1] https://specifications.freedesktop.org/basedir-spec/latest/index.html#variables
|
|
With test-case gdb.base/attach-deleted-exec.exp I ran into:
...
(gdb) attach 121552^M
Attaching to process 121552^M
Reading symbols .../attach-deleted-exec/.nfs00000000044ff2ef00000086...^M
Reading symbols from /lib64/libm.so.6...^M
(No debugging symbols found in /lib64/libm.so.6)^M
Reading symbols from /lib64/libc.so.6...^M
(No debugging symbols found in /lib64/libc.so.6)^M
Reading symbols from /lib64/ld64.so.2...^M
(No debugging symbols found in /lib64/ld64.so.2)^M
0x00007fff947cc838 in clock_nanosleep@@GLIBC_2.17 () from /lib64/libc.so.6^M
(gdb) FAIL: $exp: attach to process with deleted executable
....
The .nfs file indicates:
- that the file has been removed on the NFS server, and
- that the file is still open on the NFS client.
Fix this by detecting this situation, and declaring the test for filename
/proc/PID/exe unsupported.
Tested on:
- x86_64-linux (setup without NFS)
- ppc64le-linux (setup with NFS)
PR testsuite/32130
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32130
|
|
On riscv64-linux, with test-case gdb.trace/entry-values.exp I run into:
...
(gdb) disassemble bar^M
Dump of assembler code for function bar:^M
0x0000000000000646 <+0>: addi sp,sp,-48^M
0x0000000000000648 <+2>: sd ra,40(sp)^M
0x000000000000064a <+4>: sd s0,32(sp)^M
0x000000000000064c <+6>: addi s0,sp,48^M
0x000000000000064e <+8>: mv a5,a0^M
0x0000000000000650 <+10>: sw a5,-36(s0)^M
0x0000000000000654 <+14>: li a5,2^M
0x0000000000000656 <+16>: sw a5,-20(s0)^M
0x000000000000065a <+20>: lw a4,-20(s0)^M
0x000000000000065e <+24>: lw a5,-36(s0)^M
0x0000000000000662 <+28>: mv a1,a4^M
0x0000000000000664 <+30>: mv a0,a5^M
0x0000000000000666 <+32>: jal 0x628 <foo>^M
0x000000000000066a <+36>: mv a5,a0^M
0x000000000000066c <+38>: mv a0,a5^M
0x000000000000066e <+40>: ld ra,40(sp)^M
0x0000000000000670 <+42>: ld s0,32(sp)^M
0x0000000000000672 <+44>: addi sp,sp,48^M
0x0000000000000674 <+46>: ret^M
End of assembler dump.^M
(gdb) FAIL: gdb.trace/entry-values.exp: disassemble bar
FAIL: gdb.trace/entry-values.exp: find the call or branch instruction offset in bar
...
Fix this by setting call_insn to jal for riscv64.
Tested on riscv64-linux and x86_64-linux.
|
|
On aarch64-linux, with test-case gdb.mi/mi-multi-commands.exp once in a while
I run into (edited for readability):
...
(gdb) ^M
<LOTS-OF-SPACES>-data-evaluate-expression $a^M
-data-evaluate-^done,value="\"FIRST COMMAND\""^M
expression $b(gdb) ^M
^M
^done,value="\"TEST COMPLETE\""^M
(gdb) ^M
PASS: $exp: args=: look for first command output, command length 236
FAIL: $exp: args=: look for second command output, command length 236 (timeout)
...
This is more likely to trigger when running the test-case using
taskset -c <cpu> (where in a big.little setup we pick a little cpu).
The setup here is that the test-case issues these two commands at once:
...
-data-evaluate-expression $a
-data-evaluate-expression $b
...
where the length of the first command is artificially increased by prefixing
it with spaces, show as <LOTS-OF-SPACES> above.
What happens is that gdb, after parsing the first command, executes it.
Then the output of the first command intermixes with the echoing of the second
command, which produces this line containing the first prompt:
...
expression $b(gdb) ^M
...
which doesn't match the \r\n prefix of the regexp supposed to consume the
first prompt:
...
-re "\r\n$mi_gdb_prompt" {
...
Fix this by dropping the \r\n prefix.
Tested on aarch64-linux.
PR testsuite/29781
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29781
|
|
|
|
commit 292676c15a615b5a95bede9ee91004d3f7ee7dfd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Feb 13 13:44:17 2020 -0800
x86: Resolve PLT32 reloc aganst local symbol to section
resolved PLT32 relocation against local symbol to section and
commit 2585b7a5ce5830e60a089aa2316a329558902f0c
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Sun Jul 19 06:51:19 2020 -0700
x86: Change PLT32 reloc against section to PC32
turned PLT32 relocation against section into PC32 relocation. But these
transformations are valid only for PC-relative relocations. Add fx_pcrel
check for PC-relative relocations when performing these transformations
to keep PLT32 relocation in `movq $foo@PLT, %rax`.
gas/
PR gas/32196
* config/tc-i386.c (tc_i386_fix_adjustable): Return fixP->fx_pcrel
for PLT32 relocations.
(i386_validate_fix): Turn PLT32 relocation into PC32 relocation
only if fixp->fx_pcrel is set.
* testsuite/gas/i386/reloc32.d: Updated.
* testsuite/gas/i386/reloc64.d: Likewise.
* testsuite/gas/i386/reloc32.s: Add PR gas/32196 test.
* testsuite/gas/i386/reloc64.s: Likewise.
ld/
PR gas/32196
* testsuite/ld-x86-64/plt3.s: New file.
* testsuite/ld-x86-64/x86-64.exp: Run plt3.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
|
|
Test-case gdb.ada/call_pn.exp contains an unconditional xfail, which is only
necessary for gcc 8 and 9.
Fix this by limiting the xfail to those releases.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
With test-case gdb.ada/call_pn.exp and glibc debug info installed, I ran into
this timeout:
...
(gdb) maint expand-symtabs^M
FAIL: gdb.ada/call_pn.exp: maint expand-symtabs (timeout)
...
The timeout was related to running the cpu at base frequency of 400Mhz instead
of boost frequency of 3.5Ghz (efficiency core) or 4.7Ghz (performance core).
But when investigating the test-case I realized that the maint expand-symtabs
could be limited to the source files, so use that to speed up the test-case.
Tested on x86_64-linux.
Co-Authored-By: Tom Tromey <tom@tromey.com>
Approved-By: Tom Tromey <tom@tromey.com>
PR testsuite/32177
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=32177
|
|
When running the testsuite in an enviroment simulating a stressed system, I
ran into timeouts in three test-cases in gdb.dwarf2:
- gdb.dwarf2/count.exp,
- gdb.dwarf2/implptrconst.exp, and
- gdb.dwarf2/implptrpiece.exp.
In all three cases, -readnow is used which results in symtabs being expanded for
the executable, /lib64/libc.so.6 and /lib64/ld-linux-x86-64.so.2.
We could address this by limiting the scope of -readnow to the executable, but
after reviewing the test-cases there doesn't seem to be a clear reason to use
-readnow.
Fix this by dropping the -readnow.
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
|
|
Assembler shouldn't accept invalid TLS instructions, TLS relocations
can only be used with specific instructions as specified in TLS psABI
and linker issues an error when TLS relocations are used with wrong
instructions or format. Since it is inconvenient for gcc to rely on
linker to report errors, adding TLS check in the assembler stage so
that gcc can know TLS errors earlier.
gas/ChangeLog:
PR gas/32022
* config.in: Regenerate.
* config/tc-i386.c
*(enum x86_tls_error_type): New.
*(struct _i386_insn): Added has_gotrel to indicate whether TLS
relocations need to be checked.
(x86_check_tls_relocation): Added a new function to check TLS
relocation.
(x86_report_tls_error): Created a new function to report TLS error.
(i386_assemble): Handle x86_check_tls_relocation.
(lex_got): Set i.has_gotrel.
(OPTION_MTLS_CHECK): Added a new option to contrl TLS check.
(struct option): Ditto.
(md_parse_option): Ditto.
(md_show_usage): Ditto.
* configure.ac: Added a new option to check TLS relocation by
default.
* configure: Regenerated.
* doc/c-i386.texi: Document -mtls-check=.
* testsuite/gas/i386/i386.exp: Added new tests.
* testsuite/gas/i386/ilp32/ilp32.exp: Ditto.
* testsuite/gas/i386/ilp32/reloc64.d: Disable TLS check for it.
* testsuite/gas/i386/ilp32/x32-tls.d: Ditto.
* testsuite/gas/i386/inval-tls.l: Added more test cases.
* testsuite/gas/i386/inval-tls.s: Ditto.
* testsuite/gas/i386/reloc32.d: Disable TLS check for it.
* testsuite/gas/i386/reloc64.d: Ditto.
* testsuite/gas/i386/x86-64-inval-tls.l: Added more test cases.
* testsuite/gas/i386/x86-64-inval-tls.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Added new tests.
* testsuite/gas/i386/ilp32/x32-inval-tls.l: New test.
* testsuite/gas/i386/ilp32/x32-inval-tls.s: Ditto.
* testsuite/gas/i386/ilp32/x86-64-tls.d: Ditto.
* testsuite/gas/i386/tls.d: Ditto.
* testsuite/gas/i386/tls.s: Ditto.
* testsuite/gas/i386/x86-64-tls.d: Ditto.
* testsuite/gas/i386/x86-64-tls.s: Ditto.
ld/ChangeLog:
PR gas/32022
* testsuite/ld-i386/tlsgdesc1.d: Disable TLS check for it.
* testsuite/ld-i386/tlsgdesc2.d: Ditto.
* testsuite/ld-i386/tlsie2.d: Ditto.
* testsuite/ld-i386/tlsie3.d: Ditto.
* testsuite/ld-i386/tlsie4.d: Ditto.
* testsuite/ld-i386/tlsie5.d: Ditto.
* testsuite/ld-i386/tlsgdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc3.d: Ditto.
* testsuite/ld-x86-64/tlsdesc4.d: Ditto.
* testsuite/ld-x86-64/tlsie2.d: Ditto.
* testsuite/ld-x86-64/tlsie3.d: Ditto.
* testsuite/ld-x86-64/tlsie5.d: Ditto.
* testsuite/ld-x86-64/tlsdesc5.d: Ditto.
|
|
The commit
bf6d7087de0 ld: Move the .note.build-id section to near the start of the memory map
moves the .note.build-id section before text sections. When --rosegment
and -z separate-code are used together, the .note.gnu.property section
is placed between the .note.build-id section and text sections in the
same PT_LOAD segment by orphan placement. Pass --no-rosegment to ld for
PR ld/22393 tests to avoid linker test failures.
PR ld/32190
* testsuite/ld-elf/pr22393-2a.rd: Pass --no-rosegment to ld.
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-elf/shared.exp: Pass --no-rosegment to ld when
building pr22393-2 tests.
* testsuite/ld-x86-64/pr22393-3a.rd: Pass --no-rosegment to ld.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Pass --no-rosegment to ld when
building pr22393-3 tests.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
With the previous commits, the only thing entangling elf and coff file
reading with dbx file reading is the functions
{elf|coff}stab_build_psymtabs, defined in dbxread.c. These functions
depend on dbx_symfile_read.
To solve this, I renamed read_stabs_symtab to read_stabs_symtab_1, and
created a function with the original name that does what
dbx_symfile_read used to do.
This way, dbx_symfile_read can just call read_stabs_symtab, and the elf
and coff psymtab builders can also call it directly, fully disentangling
the readers, which would allow us to selectively not compile dbxread in
the future.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Despite the name, read_dbx_symtab is not only used for the dbx file
format (also called the aout format). It is used by elf and coff
implicitly as well. So I think it makes more sense to have this function
in the generic stabsread file, so that reading elf files or coff files
depends less on GDB's ability to read dbx files.
There were 11 static functions in dbxread that were onlyl helper
functions, they were moved and kept as static in stabsread.c. Notably,
dbx_read_symtab - which is installed as a callback on legacy_psymtab
for aout, elf and coff at least - has been moved to stabsread.c and
renamed as well; the function that is specific to aout is
dbx_symfile_read, and that hasn't been moved.
Some macros had to be moved as well, but since they are still used
in dbxread, they were moved to the .h file that the struct symloc
is declared, so anyone can properly use the struct.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
This function is used by multiple stabs readers (even if not all), and
the comment in stabsread.h even acknowledges it. I believe that the
comment is incorrect in saying that the function should be in dbxread
because not everyone uses it. If any one reader other than dbx uses
it, the function should be in stabsread, in my opinion.
This commit makes also renames the function to stabs_end_psymtab since,
again, this is not specific to dbx/aout format.
struct symloc had to be moved because stabs_end_psymtab dereferences
symloc objects, so stabsread.c must be aware of the full struct.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
The function process_one_symbol was defined in the file dbxread.c, but
this function is used by all file formats that handle stabs debug
information. It makes much more sense for it to be in the stabsread.c
file instead.
To move that function, many other static functions had to be moved from
dbxread. A few were only used by process_one_symbol, so they're still
static, but most were used by other functions still in dbxread, so they
are being exported by stabsread.h
Finally, the registry entry has been moved as well, seeing as it was
already exported by gdb-stabs.h, and stabsread.c will need it to
properly use the newly added function.
With this change, reading mdebug files is totally independent of reading
dbx.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
The file dbxread.c, which is responsible for reading stabs information
for multiple file formats, relies heavily on setting and using global
variables over the course of reading symbols.
Future patches aim to make stabs reading more file format independent,
and this patch starts that change by introducing a stabs_context struct,
that will hold all the relevant variables. This context struct is saved
on the registry key inside the objfile being read. Some of those global
variables have been deemed irrelevant:
* dbxread_objfile - Since we're saving in an objfile, this is redundant
* symfile_bfd - It is trivial to get the bfd pointer from the objfile,
so also unnecessary
* string_table_offset - was never initialized, just used to set a value.
That usage was substituted by a hardcoded 0
* next_file_string_table_offset - was only used by read_dbx_symtab, so
it was turned into a local variable there.
As I was moving variables, I also couldn't think of a good reason for
the bincl_list to be a pointer, so it was changed to just be an
std::vector.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
The test gdb.base/bp-cond-failure is implicitly expecting that the
function foo will be inlined twice and gdb will be able to find 2
locations to place a breakpoint. When clang is used, gdb only finds
one location which causes the test to fail. Since the test is not
worried about handling breakpoints on inlined functions, but rather on
the format of the message on a breakpoint condition fail, this seems
like a false fail report.
This commit reworks the test to be in c++, and uses function overloading
to ensure that 2 locations will always be found. Empirical testing
showed that, for clang, we will land on location 2 with the currest exp
commands, no matter the order of the functions declared, whereas for gcc
it depends on the order that functions were declared, so they are
ordered to always land on the second location, this way we are able to
hardcode it and check for it.
Reviewed-by: Keith Seitz <keiths@redhat.com>
Approved-By: Tom Tromey <tom@tromey.com>
|
|
There is no such linker command-line option, -z one-rosegment. Replace
it with --rosegment in comments.
* genscripts.sh: Change -z one-rosegment to --rosegment in
comments.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
|
|
Disable PIE on PR gas/32189 test, which contains the non-PIE assembly
source, to support GCC defaulted to PIE.
PR gas/32189
* testsuite/ld-x86-64/x86-64.exp: Pass $NOPIE_LDFLAGS to linker
on PR gas/32189 test.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
R_X86_64_GOT64 relocation should never be made section relative. Change
tc_i386_fix_adjustable to return 0 for BFD_RELOC_X86_64_GOT64.
gas/
PR gas/32189
* config/tc-i386.c (tc_i386_fix_adjustable): Return 0 for
BFD_RELOC_X86_64_GOT64.
* testsuite/gas/i386/reloc64.d: Updated.
* testsuite/gas/i386/reloc64.s: Add more tests for R_X86_64_GOT64
and R_X86_64_GOTOFF64.
ld/
PR gas/32189
* testsuite/ld-x86-64/x86-64.exp: Run PR gas/32189 test.
* testsuite/ld-x86-64/pr32189.s: New file.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Sync the maintainers file with my new email address
|
|
This helps GDB to locate the debug information associated with a core dump.
Core dumps include the first page of an executable's image, and if this
page include the .note.build-id section then GDB can find it and then track
down a debug info file for that build-id.
|
|
Fixed UBSAN runtime errors such as:
- member call on address which does not point to an object of type 'Vector'
- load of misaligned address 0x623e5a670173 for type 'int', which requires 4 byte alignment
gprofng/ChangeLog
2024-09-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>.
PR gprofng/32096
* libcollector/unwind.c: Fix UBSAN runtime errors.
* src/CallStack.cc (add_stack_java, add_stack_java_epilogue):
Change argument type to Vector<Histable*>*.
* src/Experiment.cc (update_ts_in_maps): Change variable type.
* src/Experiment.h: Change field type to Vector<Histable*>*.
|
|
|
|
LoongArch: Add elfNN_loongarch_mkobject to initialize LoongArch tdata.
|
|
V{BROADCAST,EXTRACT,INSERT}{F,I}128 and VROUND{P,S}{S,D} aren't promoted
to support EGPR in APX spec. Don't promote them out of APX spec. This
commit effectively reverted:
ec3babb8c10 x86/APX: V{BROADCAST,EXTRACT,INSERT}{F,I}128 can also be expressed
5a635f1f59a x86/APX: VROUND{P,S}{S,D} encodings require AVX512{F,VL}
eea4357967b x86/APX: VROUND{P,S}{S,D} can generally be encoded
gas/
PR gas/32171
* testsuite/gas/i386/x86-64-apx-egpr-promote-inval.s: Add
V{BROADCAST,EXTRACT,INSERT}{F,I}128 tests with EGPR.
* testsuite/gas/i386/x86-64-apx-evex-promoted.s: Remove
V{BROADCAST,EXTRACT,INSERT}{F,I}128 and VROUND{P,S}{S,D} tests
with EGPR.
* testsuite/gas/i386/x86-64-apx-egpr-inval.l: Updated.
* testsuite/gas/i386/x86-64-apx-egpr-promote-inval.l: Likewise.
* testsuite/gas/i386/x86-64-apx-evex-promoted-intel.d: Likewise.
* testsuite/gas/i386/x86-64-apx-evex-promoted-wig.d: Likewise.
* testsuite/gas/i386/x86-64-apx-evex-promoted.d: Likewise.
opcodes/
PR gas/32171
* i386-opc.tbl: Remove V{BROADCAST,EXTRACT,INSERT}{F,I}128 and
VROUND{P,S}{S,D} entries with EGPR.
* i386-tbl.h: Regenerated.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
|
|
|
|
The test gdb.mi/dw2-ref-missing-frame.exp uses the old-school way to set
debug information by hand, using a .S file and assembly labels to get
addresses. Unfortunately, clang will always re-arrange the global labels
to be side by side, making high and low PC for CUs and functions be the
same, and thus they will all be empty ranges. This makes the test fail,
since we never technically enter the functions that we want to check.
This commit skips that test when using clang. If we ever port this test
to use the dwarf assembler, we can reenable it with clang.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
The inline tests in gdb.mi/mi-var-cp.cc were failing when using clang to
run the test. This happened because inline tests want to step past the C
statements and then run the TCL tests, but in mi-var-cp.cc the statement
to be stepped past is "return s2.i;". Since clang links the epilogue
information to the return statement, not the closing brace,
single-stepping past return had us exiting the function - which made the
expressions invalid.
This commit fixes this by making the function have 2 C statements, and
the return one be after all inline tests, so we know GDB won't leave the
function before running the create_varobj tests.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
Clang adds line table information for a try/catch block differently to
gcc. Instead of linking the instructions related to __cxa_begin_catch to
the line containing the "catch" statement in the source code, it links
to the closing brace of the try block.
This was causing gdb.mi/mi-catch-cpp-exceptions.exp to fail when tested
with clang. The test was updated to have the catch in the same line as
the closing brace so it passes with no additional modifications with
clang.
Approved-By: Tom Tromey <tom@tromey.com>
|
|
|
|
I found a typo in a test name in py-arch.exp.
|
|
|
|
A sequence such as:
li at,-1
bne xx,at,0f
li at,1
dsll32 at,at,0x1f
is produced in the expansion of the DDIV and DREM assembly macros, where
a redundant `li at,1' instruction is used to load an intermediate value
of 1 into $at, which is then left-shifted by 63 with `dsll32 at,at,0x1f'
yielding 0x8000000000000000. However this value likewise results from
left-shifting the value of -1, already present in $at at this point.
Remove the extraneous instruction then, shortening the sequence emitted.
Adjust dumps in the testsuite accordingly.
|
|
Add `--show-raw-insn' to division tests so as to verify branch offsets
without the need to know actual offsets into the text section individual
instructions have been assembled at. Add `-z' where applicable to make
interlock NOP instructions appear in output so as to verify them without
the need to know the offsets too. Replace individual offsets to match
against with generic patterns so that a change in the expansion of an
assembly macro does not affect code that follows.
|
|
Rewrite the inline documentation for the characters used in the `args'
member of `struct mips_opcode' to make it consistent in terms of style
and formatting. Discard references to inexistent macros.
|
|
Following
commit 6cce025114ccd0f53cc552fde12b6329596c6c65
Date: Fri Mar 3 19:03:15 2023 +0000
gdb: only insert thread-specific breakpoints in the relevant inferior
... when building amd-dbgapi-target.c:
CXX amd-dbgapi-target.o
/home/smarchi/src/binutils-gdb/gdb/amd-dbgapi-target.c:486:8: error: ‘void amd_dbgapi_target_breakpoint::re_set()’ marked ‘override’, but does not override
486 | void re_set () override;
| ^~~~~~
Update the signature to match the base.
Change-Id: Ie8bd71a63284917180f3e67eead58bea74bb0692
|
|
|
