| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pass to get_linux_inferior_data the inferior for which we want to obtain
the linux-specific data, rather than assuming the current inferior.
This helps slightly reduce the diff in the upcoming main patch.
Update the sole caller to pass the current inferior.
gdb/ChangeLog:
* linux-tdep.c (get_linux_inferior_data): Add inferior
parameter.
(linux_vsyscall_range): Pass current inferior.
Change-Id: Ie4b61190e4a2e89b5b55a140cfecd4de66d92393
|
|
This is a preparatory patch to reduce the size of the diff of the
upcoming main patch. It introduces enum types for the return values of
displaced step "prepare" and "finish" operations. I find that this
expresses better the intention of the code, rather than returning
arbitrary integer values (-1, 0 and 1) which are difficult to remember.
That makes the code easier to read.
I put the new enum types in a new displaced-stepping.h file, because I
introduce that file in a later patch anyway. Putting it there avoids
having to move it later.
There is one change in behavior for displaced_step_finish: it currently
returns 0 if the thread wasn't doing a displaced step and 1 if the
thread was doing a displaced step which was executed successfully. It
turns out that this distinction is not needed by any caller, so I've
merged these two cases into "_OK", rather than adding an extra
enumerator.
gdb/ChangeLog:
* infrun.c (displaced_step_prepare_throw): Change return type to
displaced_step_prepare_status.
(displaced_step_prepare): Likewise.
(displaced_step_finish): Change return type to
displaced_step_finish_status.
(resume_1): Adjust.
(stop_all_threads): Adjust.
* displaced-stepping.h: New file.
Change-Id: I5c8fe07212cd398d5b486b5936d9d0807acd3788
|
|
This is a preparatory patch to reduce a little bit the diff size of the
main patch later in this series. It renames the displaced_step_fixup
function in infrun.c to displaced_step_finish.
The rationale is to better differentiate the low and high level
operations.
We first have the low level operation of writing an instruction to a
displaced buffer, called "copy_insn". The mirror low level operation to
fix up the state after having executed the instruction is "fixup". The
high level operation of preparing a thread for a displaced step (which
includes doing the "copy_insn" and some more bookkeeping) is called
"prepare" (as in displaced_step_prepare). The mirror high level
operation to cleaning up after a displaced step (which includes doing
the "fixup" and some more bookkeeping) is currently also called "fixup"
(as in displaced_step_fixup), just like the low level operation.
I think that choosing a different name for the low and high level
cleanup operation makes it clearer, hence "finish".
gdb/ChangeLog:
* infrun.c (displaced_step_fixup): Rename to...
(displaced_step_finish): ... this, update all callers.
Change-Id: Id32f48c1e2091d09854c77fcedcc14d2519957a2
|
|
Since we're going to introduce other "displaced step" functions and
another kind of displaced step closure, make it clear that this is the
return type of the gdbarch_displaced_step_copy_insn function.
gdb/ChangeLog:
* infrun.h (get_displaced_step_closure_by_addr): Rename to...
(get_displaced_step_copy_insn_closure_by_addr): ... this.
Update all users.
(displaced_step_closure): Rename to...
(displaced_step_copy_insn_closure): ... this. Update all users.
(displaced_step_closure_up): Rename to...
(displaced_step_copy_insn_closure_up). ... this. Update all
users.
(buf_displaced_step_closure): Rename to...
(buf_displaced_step_copy_insn_closure): ... this. Update all
users.
* infrun.c (get_displaced_step_closure_by_addr): Rename to...
(get_displaced_step_copy_insn_closure_by_addr): ... this.
Update all users.
* aarch64-tdep.c (aarch64_displaced_step_closure): Rename to...
(aarch64_displaced_step_copy_insn_closure): ... this. Update
all users.
* amd64-tdep.c (amd64_displaced_step_closure): Rename to...
(amd64_displaced_step_copy_insn_closure): ... this. Update all
users.
* arm-tdep.h (arm_displaced_step_closure): Rename to...
(arm_displaced_step_copy_insn_closure): ... this. Update all
users.
* i386-tdep.h (i386_displaced_step_closure): Rename to...
(i386_displaced_step_copy_insn_closure): ... this. Update all
users.
* rs6000-tdep.c (ppc_displaced_step_closure): Rename to...
(ppc_displaced_step_copy_insn_closure): ... this. Update all
users.
* s390-tdep.c (s390_displaced_step_closure): Rename to...
(s390_displaced_step_copy_insn_closure): ... this. Update all
users.
* gdbarch.h: Re-generate.
* gdbarch.c: Re-generate.
Change-Id: I11f56dbcd4c3532fb195a08ba93bccf1d12a03c8
|
|
Rename step_over_queue_head to global_thread_step_over_chain_head, to
make it more obvious when reading code that we are touching the global
queue. Rename all functions that operate on it to have "global" in
their name, to make it clear on which chain they operate on. Also, in a
subsequent patch, we'll need both global and non-global versions of
these functions, so it will be easier to do the distinction if they are
named properly.
Normalize the naming to use "chain" everywhere instead of sometimes
"queue", sometimes "chain".
I also reworded a few comments in gdbthread.h. They implied that the
step over chain is per-inferior, when in reality there is only one
global chain, not one per inferior, as far as I understand.
gdb/ChangeLog:
* gdbthread.h (thread_step_over_chain_enqueue): Rename to...
(global_thread_step_over_chain_enqueue): ... this. Update all
users.
(thread_step_over_chain_remove): Rename to...
(global_thread_step_over_chain_remove): ... this. Update all
users.
(thread_step_over_chain_next): Rename to...
(global_thread_step_over_chain_next): ... this. Update all
users.
* infrun.h (step_over_queue_head): Rename to...
(global_thread_step_over_chain_head): ... this. Update all
users.
* infrun.c (step_over_queue_head): Rename to...
(global_thread_step_over_chain_head): ... this. Update all
users.
* thread.c (step_over_chain_remove): Rename to...
(thread_step_over_chain_remove): ... this. Update all users.
(thread_step_over_chain_next): Rename to...
(global_thread_step_over_chain_next): ... this. Update all
users.
(thread_step_over_chain_enqueue): Rename to...
(global_thread_step_over_chain_enqueue): ... this. Update all
users.
(thread_step_over_chain_remove): Rename to...
(global_thread_step_over_chain_remove): ... this. Update all
users.
Change-Id: Iabbf57d83c01321ca199d83fadb57f5b04e4d6d9
|
|
Remove function get_displaced_stepping_state. When it was introduced,
inferiors' displaced stepping state was kept in a linked list in
infrun.c, so it was handy. Nowadays, the state is kept inside struct
inferior directly, so we can just access it directly instead.
gdb/ChangeLog:
* infrun.c (get_displaced_stepping_state): Remove, change
callers to access the field directly.
Change-Id: I9a733e32e29c7ebf856ab0befe1076bbb8c7af69
|
|
In handle_inferior_event, where we handle forks, we make sure to restore
the bytes of the displaced stepping buffer in the child's address
space. However, we only do it when the forking thread was the one
doing a displaced step. It could happen that a thread forks while
another one is doing a displaced step. In this case, we also need to
restore the bytes in the child.
Move the byte-restoring code outside of the condition that checks
whether the event thread was displaced stepping.
gdb/ChangeLog:
* infrun.c (handle_inferior_event): Restore displaced step
buffer bytes in child process when handling fork, even if fork
happened in another thread than the displaced-stepping one.
Change-Id: Ibb0daaeb123aba03f4fb4b4d820754eb2436bc69
|
|
When a process does an exec, all its program space is replaced with the
newly loaded executable. All non-main threads disappear and the main
thread starts executing at the entry point of the new executable.
Things can go wrong if a displaced step operation is in progress while
we process the exec event.
If the main thread is the one executing the displaced step: when that
thread (now executing in the new executable) stops somewhere (say, at a
breakpoint), displaced_step_fixup will run and clear up the state. We
will execute the "fixup" phase for the instruction we single-stepped in
the old program space. We are now in a completely different context,
so doing the fixup may corrupt the state.
If it is a non-main thread that is doing the displaced step: while
handling the exec event, GDB deletes the thread_info representing that
thread (since the thread doesn't exist in the inferior after the exec).
But inferior::displaced_step_state::step_thread will still point to it.
When handling events later, this condition, in displaced_step_fixup,
will likely never be true:
/* Was this event for the thread we displaced? */
if (displaced->step_thread != event_thread)
return 0;
... since displaced->step_thread points to a deleted thread (unless that
storage gets re-used for a new thread_info, but that wouldn't be good
either). This effectively makes the displaced stepping buffer occupied
for ever. When a thread in the new program space will want to do a
displaced step, it will wait for ever.
I think we simply need to reset the displaced stepping state of the
inferior on exec. Everything execution-related that existed before the
exec is now gone.
Similarly, if a thread does an in-line step over an exec syscall
instruction, nothing clears the in-line step over info when the event is
handled. So it the in-line step over info stays there indefinitely, and
things hang because we can never start another step over. To fix this,
I added a call to clear_step_over_info in infrun_inferior_execd.
Add a test with a program with two threads that does an exec. The test
includes the following axes:
- whether it's the leader thread or the other thread that does the exec.
- whether the exec'r and exec'd program have different text segment
addresses. This is to hopefully catch cases where the displaced
stepping info doesn't get reset, and GDB later tries to restore bytes
of the old address space in the new address space. If the mapped
addresses are different, we should get some memory error. This
happens without the patch applied:
$ ./gdb -q -nx --data-directory=data-directory testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-leader-diff-text-segs-true -ex "b main" -ex r -ex "b my_execve_syscall if 0" -ex "set displaced-stepping on"
...
Breakpoint 1, main (argc=1, argv=0x7fffffffde38) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.threads/step-over-exec.c:69
69 argv0 = argv[0];
Breakpoint 2 at 0x60133a: file /home/simark/src/binutils-gdb/gdb/testsuite/lib/my-syscalls.S, line 34.
(gdb) c
Continuing.
[New Thread 0x7ffff7c62640 (LWP 1455423)]
Leader going in exec.
Exec-ing /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-leader-diff-text-segs-true-execd
[Thread 0x7ffff7c62640 (LWP 1455423) exited]
process 1455418 is executing new program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-over-exec/step-over-exec-execr-thread-leader-diff-text-segs-true-execd
Error in re-setting breakpoint 2: Function "my_execve_syscall" not defined.
No unwaited-for children left.
(gdb) n
Single stepping until exit from function _start,
which has no line number information.
Cannot access memory at address 0x6010d2
(gdb)
- Whether displaced stepping is allowed or not, so that we end up
testing both displaced stepping and in-line stepping on arches that do
support displaced stepping (otherwise, it just tests in-line stepping
twice I suppose)
To be able to precisely put a breakpoint on the syscall instruction, I
added a small assembly file (lib/my-syscalls.S) that contains minimal
Linux syscall wrappers. I prefer that to the strategy used in
gdb.base/step-over-syscall.exp, which is to stepi into the glibc wrapper
until we find something that looks like a syscall instruction, I find
that more predictable.
gdb/ChangeLog:
* infrun.c (infrun_inferior_execd): New function.
(_initialize_infrun): Attach inferior_execd observer.
gdb/testsuite/ChangeLog:
* gdb.threads/step-over-exec.exp: New.
* gdb.threads/step-over-exec.c: New.
* gdb.threads/step-over-exec-execd.c: New.
* lib/my-syscalls.S: New.
* lib/my-syscalls.h: New.
Change-Id: I1bbc8538e683f53af5b980091849086f4fec5ff9
|
|
I want to add another action (clearing displaced stepping state) that
happens when an inferior execs. I think it would be cleaner to have an
observer for this event, rather than have infrun know about each other
sub-component.
Replace the calls to solib_create_inferior_hook and
jit_inferior_created_hook in follow_exec by observers.
gdb/ChangeLog:
* observable.h (inferior_execd): Declare new observable.
* observable.c (inferior_execd): Declare new observable.
* infrun.c (follow_exec): Notify inferior_execd observer.
* jit.c (jit_inferior_created_hook): Make static.
(_initialize_jit): Register inferior_execd observer.
* jit.h (jit_inferior_created_hook): Remove declaration.
* solib.c (_initialize_solib): Register inferior_execd observer.
Change-Id: I000cce00094e23baa67df693d912646b6ae38e44
|
|
When building gdb with address sanitizer and running test-case
gdb.base/completion.exp, we run into:
...
==5743==ERROR: AddressSanitizer: heap-buffer-overflow on address \
0x60200025c02f at pc 0x000000cd9d64 bp 0x7fff3297da30 sp 0x7fff3297da28
READ of size 1 at 0x60200025c02f thread T0
#0 0xcd9d63 in completion_tracker::build_completion_result(char const*, \
int, int) gdb/completer.c:2258
...
0x60200025c02f is located 1 bytes to the left of 1-byte region \
[0x60200025c030,0x60200025c031)
...
This can be reproduced using just:
...
$ gdb
(gdb) p/d[TAB]
...
The problem is in this code in completion_tracker::build_completion_result:
...
bool completion_suppress_append
= (suppress_append_ws ()
|| match_list[0][strlen (match_list[0]) - 1] == ' ');
...
If strlen (match_list[0]) == 0, then we access match_list[0][-1].
Fix this by testing if the memory access is in bounds before doing the memory
access.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
PR gdb/27003
* completer.c (completion_tracker::build_completion_result): Don't
access match_list[0][-1].
|
|
I was inspired by this patch of Simon's:
https://sourceware.org/pipermail/gdb-patches/2020-November/173522.html
... to remove other typedefs that are no longer necessary now that gdb
uses C++.
I didn't remove absolutely every one -- I didn't touch the tdep files.
However, I removed many of them. In some cases, I removed an existing
different struct tag.
2020-12-04 Tom Tromey <tromey@adacore.com>
* linespec.c (struct linespec_token): Rename; remove typedef.
* guile/scm-block.c (struct block_smob): Remove typedef.
(struct block_syms_progress_smob): Likewise.
* guile/scm-symbol.c (struct symbol_smob): Remove typedef.
* guile/scm-symtab.c (symtab_smob): Remove typedef.
(struct sal_smob): Remove typedef.
* guile/scm-param.c (struct param_smob): Remove typedef.
* guile/scm-progspace.c (struct pspace_smob): Rename.
* guile/scm-objfile.c (struct objfile_smob): Rename.
* guile/scm-iterator.c (struct iterator_smob): Rename.
* guile/scm-frame.c (struct frame_smob): Rename.
* guile/scm-arch.c (struct arch_smob): Rename.
* guile/scm-type.c (struct field_smob): Remove typedef.
(struct type_smob): Rename.
* guile/scm-cmd.c (struct command_smob): Remove typedef.
* guile/scm-ports.c (struct ioscm_memory_port): Remove typedef.
* guile/scm-value.c (struct value_smob): Remove typedef.
* guile/scm-lazy-string.c (lazy_string_smob): Remove typedef.
* guile/guile-internal.h (struct scheme_variable)
(struct scheme_function, struct scheme_integer_constant)
(struct gdb_smob, struct chained_gdb_smob)
(struct eqable_gdb_smob, arch_smob, frame_smob, iterator_smob)
(objfile_smob, pspace_smob, type_smob): Remove typedef.
* guile/scm-pretty-print.c (pretty_printer_smob): Remove typedef.
(struct pretty_printer_worker_smob): Remove typedef.
* guile/scm-exception.c (struct exception_smob): Remove typedef.
* python/py-block.c (struct block_object): Remove typedef.
(block_syms_iterator_object): Update.
(set_block): Update.
(block_syms_iterator_object): Remove typedef.
* python/py-inferior.c (struct membuf_object): Remove typedef.
* python/py-symtab.c (struct symtab_object): Remove typedef.
(set_symtab): Update.
(sal_object): Remove typedef.
(set_sal): Update.
* python/py-frame.c (frame_object): Remove typedef.
* python/py-record-btrace.c (struct btpy_list_object): Remove
typedef.
* python/py-arch.c (struct arch_object): Remove typedef.
* python/py-linetable.c (struct linetable_entry_object)
(linetable_object, struct ltpy_iterator_object): Remove typedef.
* python/py-events.h (eventregistry_object): Remove typedef.
(struct events_object): Remove typedef.
* python/python-internal.h (gdbpy_breakpoint_object): Remove
typedef.
(thread_object): Remove typedef.
* python/py-progspace.c (pspace_object): Remove typedef.
* python/py-value.c (struct value_object): Remove typedef.
* python/py-record.h (recpy_record_object): Remove typedef.
(struct recpy_element_object): Remove typedef.
* python/py-lazy-string.c (lazy_string_object): Remove typedef.
* python/py-objfile.c (objfile_object): Remove typedef.
* python/py-cmd.c (struct cmdpy_object): Remove typedef.
* python/py-type.c (type_object): Remove typedef.
(typy_iterator_object): Update.
(set_type): Update.
(field_object): Remove typedef.
(typy_iterator_object): Remove typedef.
* python/py-registers.c (register_descriptor_iterator_object):
Remove typedef.
(struct register_descriptor_object)
(struct reggroup_iterator_object, struct reggroup_object): Remove
typedef.
* python/py-record.c (recpy_gap_object): Remove typedef.
* python/py-symbol.c (symbol_object): Remove typedef.
(set_symbol): Update.
* python/py-event.h (event_object): Remove typedef.
* python/py-param.c (parmpy_object): Remove typedef.
* python/py-instruction.c (struct py_insn_obj): Remove typedef.
* python/py-unwind.c (struct pending_frame_object): Remove typedef.
(unwind_info_object, struct cached_frame_info): Likewise.
|
|
When using the single-element form of argument to declare_labels, the
generated label (in the assembly file) is of the format ".LlabelN",
where N is a number.
I propose making it use the name of the label by default. Calling:
declare_labels foo
will generate the ".LfooN" in the assembly file (again, where N is a
number). When debugging the output of the DWARF assembler, it makes it
easier to map labels to the source. Also, when defining the same label
twice by mistake in the Tcl code (like I d id), it's easier to track the
error from the message to the root cause:
-/home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/implptrpiece/implptrpiece-dw.S:62: Error: symbol `.Llabel5' is already defined
+/home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/implptrpiece/implptrpiece-dw.S:62: Error: symbol `.Lvar_label5' is already defined
This doesn't change anything for the test cases, it just makes the
assembly output a bit nicer.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (declare_labels): Use name as text if text is
not provided.
Change-Id: I63856c1fa6390498fd5b9d66f471f817ff0a465c
|
|
Add GDBvn.texi and version.subst to the release tar file,
so the gdb.info does not need makeinfo.
This avoids the need for makeinfo to be available.
2020-12-04 Bernd Edlinger <bernd.edlinger@hotmail.de>
* Makefile.in: Delete GDBvn.texi and version.subst only in
the maintainer-clean target.
|
|
This is just an update in the gdb/ChangeLog to reflect a newly
created PR [27015] for a bugfix commit:
10c19fad arc: Write correct "eret" value during register collection
|
|
I noticed that value_internal_function_name should have a const return
type. This patch makes this change.
gdb/ChangeLog
2020-12-04 Tom Tromey <tromey@adacore.com>
* value.c (value_internal_function_name): Make return type const.
* value.h (value_internal_function_name): Make return type const.
|
|
When UBSan is enabled, I noticed runtime errors complaining of shifting
of negative numbers.
This patch fixes this by reusing existing macros from the ARM port.
It also removes unused macros from AArch64's port.
gdb/ChangeLog:
2020-12-04 Luis Machado <luis.machado@linaro.org>
* aarch64-tdep.c (submask, bit, bits): Remove.
* arch/aarch64-insn.c (extract_signed_bitfield): Remove.
(aarch64_decode_adr, aarch64_decode_b aarch64_decode_bcond)
(aarch64_decode_cb, aarch64_decode_tb)
(aarch64_decode_ldr_literal): Use sbits to extract a signed
immediate.
* arch/aarch64-insn.h (submask, bits, bit, sbits): New macros.
|
|
With target board unix/-m32 I run into:
...
(gdb) print /x $fs_base^M
$1 = void^M
(gdb) FAIL: gdb.arch/amd64-gs_base.exp: print fs_base
...
The problem is that the fs_base register is not supported for i386.
Fix this by making the test unsupported if fs_base/gs_base don't show up in
info register sys output.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
PR testsuite/26990
* gdb.arch/amd64-gs_base.exp: Handle -m32 where fs_base and gs_base
are unsupported.
|
|
When running test-case on gdb.cp/many-args.exp with target board unix/-m32, I
run into:
...
(gdb) p check_val (ref_val, ref_val, ... , ref_val, ref_val)^M
$1 = false^M
(gdb) FAIL: gdb.cp/many-args.exp: check passing many structures
...
The test source contains struct ss:
...
typedef int v4si __attribute__ ((vector_size (16)));
struct ss
{
static v4si static_field;
unsigned char aa;
};
...
and i386_16_byte_align_p returns true for this type.
Fix this by skipping static fields in i386_16_byte_align_p.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
PR tdep/27007
* i386-tdep.c (i386_16_byte_align_p): Skip static fields.
|
|
In gdb.reverse/insn-reverse.exp, we have loop containing a call to
gdb_test_multiple, which itself contains a break:
...
for {} {$count < 500} {incr count} {
...
gdb_test_multiple "x/i \$pc" "" {
...
break
}
...
On SLE-11 with:
...
$ runtest --version
Expect version is 5.44.1.11
Tcl version is 8.5
Framework version is 1.4.4
...
the break doesn't seem to have the effect of breaking out of the loop.
The break does have the effect of terminating evaluation of the expect clause,
which means we don't set insn_array, after which we run into:
...
ERROR: tcl error sourcing src/gdb/testsuite/gdb.reverse/insn-reverse.exp.
ERROR: can't read "insn_array(5)": no such element in array
...
gdb/testsuite/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
* gdb.reverse/insn-reverse.exp: Don't break inside gdb_test_multiple
clause.
|
|
Consider the test-case gdb.reverse/insn-reverse.exp.
After the loop setting count, the valid entries in various arrays range from 0
to $count - 1 inclusive.
Then $count is decremented:
...
incr count -1
...
after which the valid entries range from 0 to $count inclusive.
The first subsequent loop handles that properly:
...
for {set i $count} {$i >= 0} {incr i -1} {
...
but the following loop does not, because it treats $count as exclusive bound:
...
for {set i 0} {$i < $count} {incr i} {
...
Fix this by removing the incr, and using $count - 1 as starting value in the
first loop.
gdb/testsuite/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
* gdb.reverse/insn-reverse.exp: Fix count handling.
|
|
When running test-case gdb.reverse/insn-reverse.exp with target board
unix/-m32, we get:
...
spawn -ignore SIGHUP gcc -fno-stack-protector -fdiagnostics-color=never \
-c -g -m32 -o insn-reverse0.o insn-reverse.c^M
insn-reverse-x86.c: Assembler messages:^M
insn-reverse-x86.c:88: Error: bad register name `%r8w'^M
....
Fix this by guarding x86_64 assembly in insn-reverse-x86.c with #ifdef
__x86_64__.
Tested on x86_64-linux, with native and unix/-m32.
gdb/testsuite/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
* gdb.reverse/insn-reverse-x86.c: Guard x86_64 assembly with #ifdef
__x86_64__.
|
|
Consider test-case gdb.reverse/insn-reverse.exp.
It runs a number of subtests, dependent on the architecture, f.i. for
x86_64 it runs subtests rdrand and rdseed.
For each subtest, it checks whether the subtest is supported and otherwise
bails out of that subtest.
However, there may be a problem with the support test or the information it
relies on, and if it states that a subtest is supported while it is actually
not, we may run into a SIGILL, as f.i. described in PR21166, which results in
tcl errors like this:
...
ERROR: tcl error sourcing src/gdb/testsuite/gdb.reverse/insn-reverse.exp.
ERROR: can't read "insn_array(5)": no such element in array
...
We can emulate this by inserting a sigfpe in function rdrand in
insn-reverse-x86.c, like this:
...
volatile int a = 0; volatile int b = 1; volatile int c = b / a;
...
The problem is that the loop in the test-case attempts to stepi over of all
insn in rdrand, but because of the signal it will never get to the last insn.
Handle this by detecting that the stepi made no progress, and bailing out of
the loop.
Furthermore, make running of the subtests independent, such that a SIGILL in
subtest rdrand does not affect running of subtest rdseed.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-12-04 Tom de Vries <tdevries@suse.de>
* gdb.reverse/insn-reverse.c (test_nr): New var.
(usage, parse_args): New function.
(main): Call parse_args. Only run test for test_nr.
* gdb.reverse/insn-reverse.exp: Detect lack of progress in stepi loop
and bail out. Run subtests individually, using an inferior arg
specifying the subtest.
|
|
These two extended mnemonics are documented in the Principles of
Operations manual but currently not supported by Binutils. They
provide aliases for already supported instructions with the zero flag
being set. The flag otherwise is mingled into one of the immediate
operands what makes asm code much harder to read.
opcodes/
* s390-opc.txt: Add risbgz and risbgnz.
* s390-opc.c (U6_26): New operand type.
(INSTR_RIE_RRUUU2, MASK_RIE_RRUUU2): New instruction format and
mask.
gas/
* testsuite/gas/s390/zarch-z10.s: Add tests for risbgz.
* testsuite/gas/s390/zarch-z10.d: Add regexp for risbgz.
* testsuite/gas/s390/zarch-zEC12.s: Add tests for risbgnz.
* testsuite/gas/s390/zarch-zEC12.d: Add regexp for risbgnz.
|
|
This tidies some code used by readelf, hopefully fixing some
intermittent oss-fuzz bug reports that likely could only be reproduced
by feeding readelf two or more object files on the command line. The
second and subsequent file may see non-zero state in .bss variables,
and non-initial values in .data variables. This patch fixes some of
those, and moves some .data variables to .rodata.
* dwarf.c (frame_display_row): Do without static variable "sloc".
(cu_tu_indexes_read): Move to file scope.
(free_debug_memory): Reset it here, along with level_type_signed.
Free and clear a number of other static variables.
* readelf.c (arm_attr_public_tag <table>): Constify, updating..
(arm_attr_tag_*): ..all these uses.
(process_mips_specific): Free "rels" on error path.
|
|
Prior to this patch
ld -shared --version-script=pr26979.ver pr26978a.o pr26978b.o
results in
ld: pr26978b.o: in function `foo_v1':
(.text+0x0): multiple definition of `foo@v1'
ld: pr26978b.o:(*IND*+0x0): multiple definition of `foo'
while
ld -shared --version-script=pr26979.ver pr26978b.o pr26978a.o
results in no error, but some odd dynamic symbols.
... 0 NOTYPE GLOBAL DEFAULT 7 foo@v1
... 0 NOTYPE WEAK DEFAULT 7 foo@@v1
When linking an undecorated reference to foo against such a shared
library, ld complains about multiple definitions of foo@v1 while gold
creates a dynamic reference to foo@v1. That results in foo@v1 being
used at runtime.
While we could error in both cases, it is reasonable to say foo@v1 and
foo@@v1 are in fact the same symbol. (Same name, same version. The
only real difference is that foo@@v1 satisfies a reference to plain
foo, while foo@v1 does not.) Just as merging a weak undecorated sym
with a strong sym results in the strong sym prevailing, so should the
strong foo@v1 prevail. And since there is a definition that satisfies
plain foo, the foo@@v1 variety of dynamic symbol should be emitted at
the foo@v1 value. That makes the testcase that currently links
continue to produce a shared library, and that shared library can now
be used by both ld and gold with the same runtime behaviour as when
using gold with the odd dynamic symbol library.
bfd/
PR 26978
* elflink.c (_bfd_elf_add_default_symbol): Handle the case where
a new weak sym@@ver should be overridden by an existing sym@ver.
(elf_link_add_object_symbols): Don't _bfd_elf_add_default_symbol
for a new weak sym@ver when sym@@ver already exists.
* linker.c (link_action): Choose MIND for previous indirect,
current def, rather than MDEF.
(_bfd_generic_link_add_one_symbol <MIND>): Handle redefinition of
weak indirect symbol.
ld/
* testsuite/ld-elf/pr26978a.d,
* testsuite/ld-elf/pr26978a.s,
* testsuite/ld-elf/pr26978b.d,
* testsuite/ld-elf/pr26978b.s: New tests.
|
|
|
|
The logic in find_comp_unit and set_comp_unit is reversed. When the BFD
requires relocation, we want to put the comp_unit structure in the
map where the comp_unit objects are not shared, that is the one indexed
by objfile. If the BFD does not require relocation, then, we can share
a single comp_unit structure for all users of that BFD, so we want to
put it in the BFD-indexed map. The comments on top of
dwarf2_frame_bfd_data and dwarf2_frame_objfile_data make that clear.
Fix it by swapping the two in find_comp_unit and set_comp_unit.
I don't have a test for this, because I don't see how to write one in a
reasonable amount of time.
gdb/ChangeLog:
PR gdb/26876
* dwarf2/frame.c (find_comp_unit, set_comp_unit): Reverse use of
dwarf2_frame_bfd_data and dwarf2_frame_objfile_data.
Change-Id: I80c1ee7ad8425fa4947de65b170973d05f5a52ec
|
|
Add extended mnemonics used in the HLASM assembler. All of them are
just aliases for instructions we already support and help when
assembling code which was written for the HLASM assembler.
The HLASM mnemonics are documented here:
https://www.ibm.com/support/knowledgecenter/SSENW6_1.6.0/com.ibm.hlasm.v1r6.asm/asmr1023.pdf
See the 'Branching with extended mnemonic codes' chapter.
objdump will still print the existing mnemonics with the exception of
relative nop branches (i.e. conditional branches with an empty
condition code mask). Now we have jnop and jgnop which will be used
by objdump when possible.
The same change have been applied to the LLVM assembler:
https://reviews.llvm.org/D92185
opcodes/
* s390-opc.txt: Add extended mnemonics.
gas/
* testsuite/gas/s390/esa-g5.s: Test new extended mnemonics.
* testsuite/gas/s390/esa-g5.d: Likewise.
* testsuite/gas/s390/esa-z900.s: Likewise.
* testsuite/gas/s390/esa-z900.d: Likewise.
* testsuite/gas/s390/zarch-z900.s: Likewise.
* testsuite/gas/s390/zarch-z900.d: Likewise.
ld/
* testsuite/ld-s390/tlsbin_64.dd: The newly added jgnop mnemonic
replaces long relative branches with empty condition code mask.
|
|
A couple of lines in the vax-elf.exp test script exceed 80 characters;
wrap them.
ld/
* testsuite/ld-vax-elf/vax-elf.exp: Wrap excessively long lines
throughout.
|
|
Fails if you configure with --disable-x86-used-note. Fix that.
* testsuite/Makefile.am (pr26936a.o): Pass -mx86-used-note=yes.
(pr26936b.o, pr26936c.o, pr26936d.o): Likewise.
* testsuite/Makefile.in: Regenerate.
|
|
|
|
Required for the expected "CU:" to be emitted for long
source-paths. See binutils/dwarf.c:
if (do_wide || strlen (directory) < 76)
printf (_("CU: %s/%s:\n"), directory, file_table[0].name);
else
printf ("%s:\n", file_table[0].name);
|
|
This commit started as adding rv32e support to gdb. The rv32e
architecture is a cut-down rv32i, it only has 16 x-registers compared
to the usual 32, and an rv32e target should not have any floating
point registers.
In order to add this I needed to adjust the target description
validation checks that are performed from riscv_gdbarch_init, and I
finally got fed up with the current scheme of doing these checks and
rewrote this code.
Unfortunately the rv32e changes are currently mixed in with the
rewrite of the validation scheme. I could split these apart if anyone
is really interested in seeing these two ideas as separate patches.
The main idea behind this change is that where previously I tried to
have a purely data driven approach, a set of tables one for each
expected feature, and then a single generic function that would
validate a feature given a table, I have created a new class for each
feature. Each class has its own check member function which allows
the logic for how to check each feature to be different. I think the
new scheme is much easier to follow.
There are some other changes that I made to the validation code as
part of this commit.
I've relaxed some of the checks related to the floating point CSRs.
Previously the 3 CSRs fflags, frm, and fcsr all had to be present in
either the fpu feature or the csr feature. This requirement is now
relaxed, if the CSRs are not present then gdb will not reject the
target description. My thinking here is that there's no gdb
functionality that specifically requires these registers, and so, if a
target offers a description without these registers nothing else in
gdb should stop working.
And as part of the rv32e support targets now only have to provide the
first 16 x-registers and $pc. The second half of the x-registers (x16
-> x31) are now optional.
gdb/ChangeLog:
* arch/riscv.c: Include 'rv32e-xregs.c'.
(riscv_create_target_description): Update to handle rv32e.
* arch/riscv.h (struct riscv_gdbarch_features) <embedded>: New
member variable.
<operator==>: Update to account for new field.
<hash>: Likewise.
* features/Makefile (FEATURE_XMLFILES): Add riscv/rv32e-xregs.xml.
* features/riscv/rv32e-xregs.c: Generated.
* features/riscv/rv32e-xregs.xml: New file.
* riscv-tdep.c (riscv_debug_breakpoints): Move from later in the
file.
(riscv_debug_infcall): Likewise.
(riscv_debug_unwinder): Likewise.
(riscv_debug_gdbarch): Likewise.
(enum riscv_register_required_status): Delete.
(struct riscv_register_feature): Add constructor, delete default
constructor, copy, and assign constructors.
(struct riscv_register_feature::register_info) <required>: Delete.
<check>: Update comment and arguments.
(struct riscv_register_feature) <name>: Change to member function.
<prefer_first_name>: Delete.
<tdesc_feature>: New member function.
<registers>: Rename to...
<m_registers>: ...this.
<m_feature_name>: New member variable.
(riscv_register_feature::register_info::check): Update arguments.
(riscv_xreg_feature): Rewrite as class, create a single static
instance of the class.
(riscv_freg_feature): Likewise.
(riscv_virtual_feature): Likewise.
(riscv_csr_feature): Likewise.
(riscv_create_csr_aliases): Has become a member function inside
riscv_csr_feature class.
(riscv_abi_embedded): New function definition.
(riscv_register_name): Adjust to use new feature objects.
(struct riscv_call_info) <riscv_call_info>: Check for rv32e abi,
and adjust available argument registers.
(riscv_features_from_gdbarch_info): Check for EF_RISCV_RVE flag.
(riscv_check_tdesc_feature): Delete.
(riscv_tdesc_unknown_reg): Adjust to use new feature objects.
(riscv_gdbarch_init): Delete target description checking code, and
instead call to the new feature objects to perform the checks.
Reorder handling of no abi information case, allows small code
simplification.
(_initialize_riscv_tdep): Remove call, this is now done in the
riscv_csr_feature constructor.
* riscv-tdep.h (riscv_abi_embedded): Declare.
|
|
In this commit:
commit 767a879e31ce31179e6135c2f991f670a35709fa
Date: Tue Jun 9 17:38:30 2020 +0100
gdb/riscv: Improved register alias name creation
RISC-V GDB was changed to make use of the DECLARE_CSR_ALIAS macro to
define register aliases for some CSRs. Actually, only one alias was
created 'dscratch' as an alias for 'dscratch0'. All of the other
DECLARE_CSR_ALIAS lines (from include/opcode/riscv-opc.h) were
filtered out.
In this commit:
commit 08ccfccf0ed825be9be2972594d4be4a2207ef13
Date: Mon Jun 8 10:54:53 2020 +0800
RISC-V: Support debug and float CSR as the unprivileged ones.
Changes were made to include/opcode/riscv-opc.h so that GDB no longer
created even the dscratch alias.
This caused a test failure in gdb.arch/riscv-tdesc-regs.exp.
In looking at how to address this failure I think that the best
strategy is, for now at least, to just remove the code that tries to
create aliases with DECLARE_CSR_ALIAS.
My thoughts are that:
1. At least some of the aliases are for CSRs where the register now
has a completely different use. Being able to reference the CSR
using a completely inappropriate name just seems confusing. This
was solved by the filtering added in the first commit referenced
above. But we certainly don't want to blindly add all aliases.
2. Names presented in a target description are always honoured, so
if a user has a legacy target then they should just start sending a
target description with their legacy register names in, this problem
is then solved.
3. It's easy enough to figure out which CSRs a target has with the
info registers command, so missing an alias shouldn't be a big
issue.
4. Allowing users to use names for registers that differ from the
names the target announces doesn't feel like a critical feature. If
in the future targets want multiple names for a register then maybe
we could/should extend target descriptions to allow the target to
send aliases as well as the primary name.... but that can wait for
another day.
So in this commit I remove the use of DECLARE_CSR_ALIAS, and remove
the test that was failing.
gdb/ChangeLog:
* riscv-tdep.c (riscv_create_csr_aliases): Remove use of
DECLARE_CSR_ALIAS.
gdb/testsuite/ChangeLog:
* gdb.arch/riscv-tdesc-regs.exp: Remove unwanted test.
|
|
Unknown riscv CSRs should not be in the 'general' group, but should be
in the system and csr register groups.
To see this in action connect to QEMU, this target advertises two
registers dscratch and mucounteren which are unknown to GDB (these are
legacy CSRs). Before this commit these registers would show up in the
output of:
(gdb) info registers
....
dscratch Could not fetch register "dscratch"; remote failure reply 'E14'
mucounteren Could not fetch register "mucounteren"; remote failure reply 'E14'
Ignore the errors, this is just a QEMU annoyance, it advertises these
CSRs, but doesn't actually let GDB read them. These registers don't
show up in the output of either:
(gdb) info registers csr
(gdb) info registers system
After this commit this situation is reveresed, which makes more sense
to me.
gdb/ChangeLog:
* riscv-tdep.c (riscv_is_unknown_csr): New function,
implementation moved from riscv_register_reggroup_p.
(riscv_register_reggroup_p): Update group handling for unknown
CSRs.
gdb/testsuite/ChangeLog:
* gdb.arch/riscv-tdesc-regs.exp (get_expected_result): New proc,
update test to use this.
|
|
GNU Global outputs can be safely ignored.
ChangeLog:
2020-12-02 Enze Li <lienze2010@hotmail.com>
* .gitignore: Add gnu global outputs.
Change-Id: I04ce68ab3279426195793adb56f834a34ee72ea2
|
|
Bring in a few lines that are in gcc's .gitignore but not binutils-gdb's
.gitignore.
ChangeLog:
* .gitignore: Sync with gcc.
Change-Id: I8900ddfbb5ab8cce6236e1905fdbb52fb4c291e2
|
|
When Debian (and Ubuntu) builds its binaries, it (still) doesn't use
dwz's "--relative" option. This causes their debuginfo files to
carry a .gnu_debugaltlink section containing a full pathname to the
DWZ alt debug file, like this:
$ readelf -wk /usr/bin/cat
Contents of the .gnu_debugaltlink section:
Separate debug info file: /usr/lib/debug/.dwz/x86_64-linux-gnu/coreutils.debug
Build-ID (0x14 bytes):
ee 76 5d 71 97 37 ce 46 99 44 32 bb e8 a9 1a ef 99 96 88 db
Contents of the .gnu_debuglink section:
Separate debug info file: 06d3bee37b8c7e67b31cb2689cb351102ae73b.debug
CRC value: 0x53267655
This usually works OK, because most of the debuginfo files installed
via apt will be present in /usr/lib/debug anyway. However, imagine
the following scenario:
- You are using /usr/bin/cat, it crashes on you and generates a
corefile.
- You don't want/need to "apt install" the debuginfo file for
coreutils from the repositories. Instead, you already have the
debuginfo files in a separate directory (e.g., $HOME/dbgsym).
- You start GDB and "set debug-file-directory $HOME/dbgsym/usr/lib/debug".
You then get the following message:
$ gdb -ex 'set debug-file-directory ./dbgsym/usr/lib/debug' -ex 'file /bin/cat' -ex 'core-file ./cat.core'
GNU gdb (Ubuntu 10.1-0ubuntu1) 10.1
...
Reading symbols from /bin/cat...
Reading symbols from /home/sergio/gdb/dbgsym/usr/lib/debug/.build-id/bc/06d3bee37b8c7e67b31cb2689cb351102ae73b.debug...
could not find '.gnu_debugaltlink' file for /home/sergio/gdb/dbgsym/usr/lib/debug/.build-id/bc/06d3bee37b8c7e67b31cb2689cb351102ae73b.debug
This error happens because GDB is trying to locate the build-id
link (inside /home/sergio/gdb/dbgsym/usr/lib/debug/.build-id) for the
DWZ alt debug file, which doesn't exist. Arguably, this is a problem
with how dh_dwz works in Debian, and it's something I'm also planning
to tackle. But, back at the problem at hand.
Besides not being able to find the build-id link in the directory
mentioned above, GDB also tried to open the DWZ alt file using its
filename. The problem here is that, since we don't have the distro's
debuginfo installed, it can't find anything under /usr/lib/debug that
satisfies it.
It occurred to me that a good way to workaround this problem is to
actually try to locate the DWZ alt debug file inside the
debug-file-directories (that were likely provided by the user). So
this is what the proposed patch does.
The idea here is simple: get the filename extracted from the
.gnu_debugaltlink section, and manipulate it in order to replace the
initial part of the path (everything before "/.dwz/") by whatever
debug-file-directories the user might have provided.
I talked with Mark Wielaard and he agrees this is a sensible approach.
In fact, apparently this is something that eu-readelf also does.
I regtested this code, and no regressions were found.
2020-12-01 Sergio Durigan Junior <sergiodj@sergiodj.net>
* dwarf2/read.c (dwz_search_other_debugdirs): New function.
(dwarf2_get_dwz_file): Convert 'filename' to a
std::string. Use dwz_search_other_debugdirs to search for DWZ
files in the debug-file-directories provided by the user as well.
|
|
In another series I'm working on, it is necessary to manage
"struct expression" with new and delete. Because the patch is
straightforward and could be extracted, I've done so here.
gdb/ChangeLog
2020-12-01 Tom Tromey <tom@tromey.com>
* parse.c (expr_builder::expr_builder): Initialize expout.
(expr_builder::release): Use expression::resize.
(expression::expression, expression::~expression)
(expression::resize): New methods.
(write_exp_elt): Use expression::resize.
(prefixify_expression): Update.
(increase_expout_size): Use expression::resize.
* expression.h (struct expression): Add constructor, destructor.
<resize>: New method.
(expression_up): Change type.
|
|
|
|
gdb/testsuite/ChangeLog:
* gdb.threads/non-ldr-exc-1.exp: Fix indentation.
Change-Id: I02ba8a518aae9cb67106d09bef92968a7078e91e
|
|
Replace the manual with_test_prefix in the do_test proc with using
foreach_with_prefix at the top-level. This helps reduce the indentation
level of the code a bit, and makes the test names in sync with the
variable names used in the code.
gdb/testsuite/ChangeLog:
* gdb.threads/non-ldr-exc-1.exp: Use foreach_with_prefix.
(do_test): Don't use with_test_prefix.
* gdb.threads/non-ldr-exc-2.exp: Use foreach_with_prefix.
(do_test): Don't use with_test_prefix.
* gdb.threads/non-ldr-exc-3.exp: Use foreach_with_prefix.
(do_test): Don't use with_test_prefix.
* gdb.threads/non-ldr-exc-4.exp: Use foreach_with_prefix.
(do_test): Don't use with_test_prefix.
Change-Id: I3af1df2eee1a8add427a67b6048bb6dede41cbeb
|
|
Power 10 introduces the 2nd DAWR (second watchpoint) and also removed
a restriction that limit the watch region to 512 bytes.
2020-11-08 Rogerio A. Cardoso <rcardoso@linux.ibm.com>
/gdb
* ppc-linux-nat.c: (PPC_DEBUG_FEATURE_DATA_BP_ARCH_31): New define.
(region_ok_for_hw_watchpoint): Check if 2nd DAWR is avaliable before
set region.
|
|
|
|
Maybe there's something I don't understand in that test, but the comment
seems wrong. It checks what happens when the non-leader thread does an
exit, not the leader.
gdb/testsuite/ChangeLog:
* gdb.threads/non-ldr-exit.exp: Fix comment.
Change-Id: I35c96a70c097fa9529737874f54f3f78036008a4
|
|
Define TEXT_START_ADDR and SHLIB_TEXT_START_ADDR with SEGMENT_START to
enable -Ttext-segment.
PR ld/26970
* scripttempl/elfarc.sc (TEXT_START_ADDR): New. Add SEGMENT_START.
(SHLIB_TEXT_START_ADDR): Likewise.
|
|
Currently when printing an XML description GDB prints enum values like
this:
<enum id="levels_type" size="4">
<field name="low" start="0"/>
<field name="high" start="1"/>
</enum>
This is incorrect, and is most likely a copy and paste error with the
struct and flags printing code. The correct syntax is:
<enum id="levels_type" size="4">
<evalue name="low" value="0"/>
<evalue name="high" value="1"/>
</enum>
A test is included to cover this functionality.
gdb/testsuite/ChangeLog:
* gdb.xml/maint-xml-dump-03.xml: New file.
gdbsupport/ChangeLog:
* tdesc.cc (print_xml_feature::visit): Print enum fields using
'evalue' syntax.
|
|
According to gdb online docs[1], XML target description enum types
have both name and size attributes. Currently GDB does not print the
size attribute. This commit fixes this. This change will be visible
in the output of the command `maint print xml-tdesc`.
There are other bugs with the print of enum types in XML target
descriptions, the next commit will fix these and include a test that
covers this patch.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Enum-Target-Types.html#Enum-Target-Types
gdbsupport/ChangeLog:
* tdesc.cc (print_xml_feature::visit): Print enum size attribute.
|
|
We have to check the first char of the Z* extensions, to make sure that
they follow the order of the standard extensions. But we can not have
the testcases for this patch, since we only support the zicsr and zifencei
so far, both of them are the sub extensions of i.
bfd/
* elfxx-riscv.c (riscv_parse_prefixed_ext): Use riscv_compare_subsets
to check the Z* extensions' order.
|
|
G is a special case, consider the ISA spec github issue as follows,
https://github.com/riscv/riscv-isa-manual/issues/575
My understand is that - i, m, a, f and d extensions are not g's implicit
extensions, they are g's expansions. The zifencei is the implicit extension
of g, and so is zicsr, since it is implicited by f (or i2p1). However,
we add the g with the RISCV_UNKNOWN_VERSION to the subset list, and it
will not output to the arch string, it is only used to check what implicit
extensions are need to be added.
bfd/
* elfxx-riscv.c (riscv_parse_add_subset): Allow to add g with
RISCV_UNKNOWN_VERSION versions.
(riscv_parse_std_ext): Add g to the subset list, we only use it
to add the implicit extensions, but won't output it to arch string.
(riscv_parse_add_implicit_subsets): Add implicit zicsr and zifencei
for g extension.
(riscv_arch_str1): Do not output g to the arch string.
* elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Moved to include/opcode/riscv.h.
gas/
* testsuite/gas/riscv/attribute-10.d: Updated.
* testsuite/gas/riscv/march-imply-g.d: New testcase for g.
* testsuite/gas/riscv/march-imply-unsupported.d: The zicsr and zifencei
are not supported in the ISA spec v2.2, so don't add and output them.
include/
* opcode/riscv.h (RISCV_UNKNOWN_VERSION): added.
|
