| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
multi-threaded.
On Linux, we need to explicitly ptrace attach to all lwps of a
process. Because GDB might not be connected yet when an attach is
requested, and thus it may not be possible to activate thread_db, as
that requires access to symbols (IOW, gdbserver --attach), a while ago
we make linux_attach loop over the lwps as listed by /proc/PID/task to
find the lwps to attach to.
linux_attach_lwp_1 has:
...
if (initial)
/* If lwp is the tgid, we handle adding existing threads later.
Otherwise we just add lwp without bothering about any other
threads. */
ptid = ptid_build (lwpid, lwpid, 0);
else
{
/* Note that extracting the pid from the current inferior is
safe, since we're always called in the context of the same
process as this new thread. */
int pid = pid_of (current_inferior);
ptid = ptid_build (pid, lwpid, 0);
}
That "safe" comment referred to linux_attach_lwp being called by
thread-db.c. But this was clearly missed when a new call to
linux_attach_lwp_1 was added to linux_attach. As a result,
current_inferior will be set to some random process, and non-initial
lwps of the second inferior get assigned the pid of the wrong
inferior. E.g., in the case of attaching to two inferiors, for the
second inferior (and so on), non-initial lwps of the second inferior
get assigned the pid of the first inferior. This doesn't trigger on
the first inferior, when current_inferior is NULL, add_thread switches
the current inferior to the newly added thread.
Rather than making linux_attach switch current_inferior temporarily
(thus avoiding further reliance on global state), or making
linux_attach_lwp_1 get the tgid from /proc, which add extra syscalls,
and will be wrong in case of the user having originally attached
directly to a non-tgid lwp, and then that lwp spawning new clones (the
ptid.pid field of further new clones should be the same as the
original lwp's pid, which is not the tgid), we note that callers of
linux_attach_lwp/linux_attach_lwp_1 always have the right pid handy
already, so they can pass it down along with the lwpid.
The only other reason for the "initial" parameter is to error out
instead of warn in case of attach failure, when we're first attaching
to a process. There are only three callers of
linux_attach_lwp/linux_attach_lwp_1, and each wants to print a
different warn/error string, so we can just move the error/warn out of
linux_attach_lwp_1 to the callers, thus getting rid of the "initial"
parameter.
There really nothing gdbserver-specific about attaching to two
threaded processes, so this adds a new test under gdb.multi/. The
test passes cleanly against the native GNU/Linux target, but
fails/triggers the bug against GDBserver (before the patch), with the
native-extended-remote board (as plain remote doesn't support
multi-process).
Tested on x86_64 Fedora 17, with the native-extended-gdbserver board.
gdb/gdbserver/
2014-04-25 Pedro Alves <palves@redhat.com>
PR server/16255
* linux-low.c (linux_attach_fail_reason_string): New function.
(linux_attach_lwp): Delete.
(linux_attach_lwp_1): Rename to ...
(linux_attach_lwp): ... this. Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach): Adjust to call linux_attach_lwp. Call error on
failure to attach to the tgid. Call warning when failing to
attach to an lwp.
* linux-low.h (linux_attach_lwp): Take a ptid instead of a pid as
argument. Remove "initial" parameter. Return int instead of
void. Don't error or warn here.
(linux_attach_fail_reason_string): New declaration.
* thread-db.c (attach_thread): Adjust to linux_attach_lwp's
interface change. Use linux_attach_fail_reason_string.
gdb/
2014-04-25 Pedro Alves <palves@redhat.com>
PR server/16255
* common/linux-ptrace.c (linux_ptrace_attach_warnings): Rename to ...
(linux_ptrace_attach_fail_reason): ... this. Remove "warning: "
and newline from built string.
* common/linux-ptrace.h (linux_ptrace_attach_warnings): Rename to ...
(linux_ptrace_attach_fail_reason): ... this.
* linux-nat.c (linux_nat_attach): Adjust to use
linux_ptrace_attach_fail_reason.
gdb/testsuite/
2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
PR server/16255
* gdb.multi/multi-attach.c: New file.
* gdb.multi/multi-attach.exp: New file.
|
|
For several RSP packets, there's a corresponding "set remote
foo-packet on/off/auto" command that one can use do bypass
auto-detection of support for the packet or feature. However, I
noticed that setting several of these commands to 'on' or 'off'
doesn't actually have any effect. These are, at least:
set remote breakpoint-commands-packet
set remote conditional-breakpoints-packet
set remote fast-tracepoints-packet
set remote static-tracepoints-packet
set remote install-in-trace-packet
These are commands that control a remote protocol feature that doesn't
have a corresponding regular packet, and because of that we cache the
knowledge of the remote side support as returned by the qSupported
packet in the remote_state object.
E.g., in the case of the 'set remote breakpoint-commands-packet'
command, whether the feature is supported is recorded in the
'breakpoint_commands' field of the remote_state object.
Whether to bypass packet support auto-detection or not is controlled
by the 'detect' field of the corresponding packet's packet_config
structure. That field is the variable associated directly with the
"set remote foo-packet" command. Actual remote stub support for the
packet (or feature) is recorded in the 'support' field of the same
structure.
However, when the user toggles the command, the 'support' field is
also correspondingly updated to PACKET_ENABLE/DISABLE/SUPPORT_UNKNOWN,
discarding the knowledge of whether the target actually supports the
feature. If one toggles back to 'auto', it's no big issue for real
packets, as they'll just end up re-probed the next time they might be
necessary. But features whose support is only reported through
qSupported don't get their corresponding (manually added/maintained)
fields in remote_state objected updated. As we lost the actual status
of the target support for the feature, GDB would need to probe the
qSupported features again, which GDB doesn't do.
But we can avoid that extra traffic, and clean things up, IMO.
Instead of going in that direction, this patch completely decouples
struct packet_config's 'detect' and 'support' fields. E.g., when the
user does "set remote foo-packet off", instead of setting the packet
config's 'support' field to PACKET_DISABLE, the 'support' field is not
touched at all anymore. That is, we end up respecting this simple
table:
| packet_config->detect | packet_config->support | should use packet/feature? |
|-----------------------+------------------------+----------------------------|
| auto | PACKET_ENABLE | PACKET_ENABLE |
| auto | PACKET_DISABLE | PACKET_DISABLE |
| auto | PACKET_UNKNOWN | PACKET_UNKNOWN |
| yes | don't care | PACKET_ENABLE |
| no | don't care | PACKET_DISABLE |
This is implemented by the new packet_support function. With that, we
need to update this pattern throughout:
if (remote_protocol_packets[PACKET_foo].support == PACKET_DISABLE)
to do this instead:
if (packet_support (PACKET_qAttached) == PACKET_DISABLE)
where as mentioned, the packet_support function takes struct
packet_config's 'detect' field into account, like in the table above.
As when the packet is force-disabled or force-enabled, the 'support'
field is just ignored, if the command is set back to auto, we'll
resume respecting whatever the target said it supports. IOW, the end
result is that the 'support' field always represents whether the
target actually supports the packet or not.
After all that, the manually maintained breakpoint_commands and
equivalent fields of struct remote_state can then be eliminated, with
references replaced by checking the result of calling the
packet_support function on the corresponding packet or feature. This
required adding new PACKET_foo enum values for several features that
didn't have it yet. (The patch does not add corresponding "set remote
foo-packet" style commands though, focusing only on bug fixing and
laying the groundwork).
Tested on x86_64 Fedora 17, native GDBserver. The new tests all fail
without this patch.
gdb/
2014-04-25 Pedro Alves <palves@redhat.com>
* remote.c (struct remote_state): Remove multi_process_aware,
non_stop_aware, cond_tracepoints, cond_breakpoints,
breakpoint_commands, fast_tracepoints, static_tracepoints,
install_in_trace, disconnected_tracing,
enable_disable_tracepoints, string_tracing, and
augmented_libraries_svr4_read fields.
(remote_multi_process_p): Move further below in the file.
(struct packet_config): Add comments.
(update_packet_config): Delete function.
(show_packet_config_cmd): Use packet_config_support.
(add_packet_config_cmd): Use NULL as set callback.
(packet_ok): "set remote foo-packet"-style commands no longer
change config->supported -- adjust.
(PACKET_ConditionalTracepoints, PACKET_ConditionalBreakpoints)
(PACKET_BreakpointCommands, PACKET_FastTracepoints)
(PACKET_StaticTracepoints, PACKET_InstallInTrace): Add comments.
(PACKET_QNonStop, PACKET_multiprocess_feature)
(PACKET_EnableDisableTracepoints_feature, PACKET_tracenz_feature)
(PACKET_DisconnectedTracing_feature)
(PACKET_augmented_libraries_svr4_read_feature): New enum values.
(set_remote_protocol_packet_cmd): Delete function.
(packet_config_support, packet_support): New functions.
(set_remote_protocol_Z_packet_cmd): Don't call
update_packet_config.
(remote_query_attached, remote_pass_signals)
(remote_program_signals, remote_threads_info)
(remote_threads_extra_info, remote_start_remote): Use
packet_support.
(remote_start_remote): Use packet_config_support and
packet_support.
(init_all_packet_configs): Set all packets to unknown support,
instead of calling update_packet_config.
(remote_check_symbols): Use packet_support.
(remote_supported_packet): Unconditionally set the packet config's
support status.
(remote_multi_process_feature, remote_non_stop_feature)
(remote_cond_tracepoint_feature, remote_cond_breakpoint_feature)
(remote_breakpoint_commands_feature)
(remote_fast_tracepoint_feature, remote_static_tracepoint_feature)
(remote_install_in_trace_feature)
(remote_disconnected_tracing_feature)
(remote_enable_disable_tracepoint_feature)
(remote_string_tracing_feature)
(remote_augmented_libraries_svr4_read_feature): Delete functions.
(remote_protocol_features): Adjust to use remote_supported_packet
for "augmented-libraries-svr4-read", "multiprocess", "QNonStop",
"ConditionalTracepoints", "ConditionalBreakpoints",
"BreakpointCommands", "FastTracepoints", "StaticTracepoints",
"InstallInTrace", "DisconnectedTracing", "DisconnectedTracing",
"EnableDisableTracepoints", and "tracenz".
(remote_query_supported): Use packet_support.
(remote_open_1): Adjust.
(extended_remote_attach_1): Use packet_support. Switch on the
result of packet_ok instead of checking whether the packet ended
up disabled.
(remote_vcont_resume): Use packet_support.
(remote_resume, remote_stop_ns, fetch_register_using_p)
(remote_prepare_to_store, store_register_using_P)
(check_binary_download, remote_write_bytes): Use packet_support.
(remote_vkill): Use packet_support. Switch on the result of
packet_ok instead of checking whether the packet ended up
disabled.
(extended_remote_supports_disable_randomization): Use
packet_support.
(extended_remote_run): Switch on the result of packet_ok instead
of checking whether the packet ended up disabled.
(remote_insert_breakpoint, remote_remove_breakpoint)
(remote_insert_watchpoint, remote_remove_watchpoint)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Use
packet_support.
(remote_search_memory): Use packet_config_support.
(remote_get_thread_local_address, remote_get_tib_address)
(remote_hostio_send_command, remote_can_execute_reverse): Use
packet_support.
(remote_supports_cond_tracepoints)
(remote_supports_cond_breakpoints)
(remote_supports_fast_tracepoints)
(remote_supports_static_tracepoints)
(remote_supports_install_in_trace)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands): Rewrite, checking whether
the packet config says the feature is enabled or disabled.
(remote_download_tracepoint, remote_trace_set_readonly_regions)
(remote_get_trace_status): Use packet_support.
(remote_set_disconnected_tracing): Adjust to check whether the
feature is enabled with packet_support.
(remote_set_trace_buffer_size, remote_use_agent)
(remote_can_use_agent, remote_supports_btrace): Use
packet_support.
(remote_enable_btrace, remote_disable_btrace, remote_read_btrace):
Use packet_config_support.
(remote_augmented_libraries_svr4_read): Rewrite, checking whether
the packet config says the feature is enabled or disabled.
(set_range_stepping): Use packet_support.
gdb/testsuite/
2014-04-25 Pedro Alves <palves@redhat.com>
* gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
user.
(top level): Test that "set remote conditional-breakpoints-packet
off" works as intended.
* gdb.base/dprintf.exp: Test that "set remote
breakpoint-commands-packet off" works as intended.
* gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
New function.
(top level): Call it.
* gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
remote fast-tracepoints-packet off" works as intended.
* gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
|
|
versions of gcc complain about part of a conditional expression always
evaluating to false because of the size of the operands involved, even when
the entire expression is already known to be false.
* peXXigen.c (_bfd_XXi_swap_sym_out): Another fix for building on
a 342-bit host. This time for older versions of gcc.
|
|
2014-04-25 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (_initialize_cli_cmds): Document "quit" command's
argument.
|
|
* NEWS: Mention support for C99 variable length arrays.
|
|
them __attribute__((used)) or making them non-static)
gdb/testsuite/
* gdb.base/catch-syscall.c: Make unreferenced statics non-static to
ensure clang would not discard them.
* gdb.base/gdbvars.c: Ditto.
* gdb.base/memattr.c: Ditto.
* gdb.base/whatis.c: Ditto.
* gdb.python/py-prettyprint.c: Ditto.
* gdb.trace/actions.c: Ditto.
* gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
ensure clang would not discard it.
|
|
gdb/testsuite/
* gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
clang to emit the full definition of type required by the test
* gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
|
|
gdb/testsuite/
* gdb.cp/pr10728-x.cc: Return by value instead of pointer to coax
Clang into emitting the definition of the type.
* gdb.cp/pr10728-x.h: Ditto.
* gdb.cp/pr10728-y.cc: Ditto.
|
|
gdb/testsuite/
* gdb.base/label.exp: XFAIL label related tests under Clang.
* gdb.cp/cplabel.exp: Ditto.
* gdb.linespec/ls-errs.exp: Refactor tests to execute directly
and XFAIL under Clang those using labels.
|
|
I happen to see that 'double_label' isn't used in dwz.exp dwarf assembler.
Similarly, partial_label and double_label aren't used in dwzbuildid.exp.
This patch is to remove them.
gdb/testsuite:
2014-04-25 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
double_label.
* gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
partial_label and double_label.
|
|
|
|
* MAINTAINERS: Add myself and Stefan as OR1K maintainers.
|
|
gdb/testsuite/
* gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
|
|
This patch expands standard_exc's introductory comment to explain
why this table does not include Numeric_Error.
gdb/ChangeLog:
* ada-lang.c (standard_exc): Expand introductory comment.
|
|
gdb/testsuite/
* gdb.cp/cpexprs.cc: Move braces to the same line as the start
of the function to work across GCC and Clang.
* gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
pointer types (const void ** const V void **).
|
|
32-bit hosts.
|
|
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
|
|
This teaches the DWARF2 find_line functions how to deal with separate
debug relocatable object files. Also fixes a major bug:
When _bfd_dwarf2_slurp_debug_info was split out, place_sections ran
after .debug_info was relocated. This defeated the whole purpose of
place_sections. See the comment I added before place_sections.
Fixes some minor bugs too:
- place_sections didn't set VMA for alloc but non-load sections (bss).
- zero size sections can have symbols, so they need their VMA set too.
- last_vma was incorrectly adjusted.
- my last change to place_sections left VMA unchanged for .debug_info
when the linker has mapped input to output sections, but this is
wrong since bfd_simple_get_relocated_section_contents unmaps debug
sections.
PR 16867
* dwarf2.c: Formatting.
(struct dwarf2_debug): Make adjusted_section_count signed.
(unset_sections): Make i signed.
(set_debug_vma): New function.
(place_sections): Handle separate debug object file. Set VMA
on debug sections, even if they have an output section. Also
set VMA on zero size sections, and non-load but alloc sections.
Set adjusted_section_count to -1 when no section adjustment.
Malloc adjusted_sections. Don't double last_vma. Transfer
alloc section VMAs to separate debug file.
(_bfd_dwarf2_cleanup_debug_info): Free adjusted_sections.
(_bfd_dwarf2_slurp_debug_info): Add do_place parameter. Drop
test on symbols being the same before using old stash. Read
and use separate debug file symbols. Call place_sections.
(find_line): Don't call place_sections here.
* libbfd-in.h (_bfd_dwarf2_slurp_debug_info): Update proto.
* libbfd.h: Regenerate.
* mach-o.c (bfd_mach_o_find_nearest_line): Adjust
_bfd_dwarf2_slurp_debug_info call.
* simple.c (simple_save_output_info): Clarify comment.
|
|
* config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
based targets.
|
|
1. Strings (and then resource data) must follow immediately after
the end of the tables.
2. Units of resource data must be 8-byte aligned.
PR ld/16807
* peXXigen.c (struct rsrc_regions): New structure.
(rsrc_print_resource_directory): Use new structure. Include
offset of directory in listing.
(rsrc_print_resource_entry): Likewise.
(rsrc_print_section): Likewise.
(rsrc_count_entries): Do not increment sizeof_strings or
sizeof_leaves.
(rsrc_count_directory): Do not increment sizeof_tables.
(rsrc_compute_region_sizes): New function.
(rsrc_write_leaf): Maintain 8-byte alignment for resource data.
(rsrc_process_section): Compute size of regions after merging
entries.
|
|
|
|
|
|
gold/
* x86_64.cc (Target_x86_64::Relocate::relocate): Add missing break.
|
|
breakpoint table handling. This is a patch in five parts (all committed
here in one commit).
----- 1/5: parse_args
parse_args is a very useful utility function which allows you to do
getopt-y kinds of things in Tcl.
Example:
proc myproc {foo args} {
parse_args {{bar} {baz "abc"} {qux}}
# ...
}
myproc ABC -bar -baz DEF peanut butter
will define the following variables in myproc:
foo (=ABC), bar (=1), baz (=DEF), and qux (=0)
args will be the list {peanut butter}
----- 2/5: mi_build_kv_pairs
build_kv_pairs simply does what it says: given the input list
and an option join string, it combines list elements into kv-pairs
for MI handling. It knows how to handle tuples and other special
MI types.
Example:
mi_build_kv_pairs {a b c d e f g \[.*\]}
returns a=\"b\",c=\"d\",e=\"f\",g=\[.*\]
----- 3/5: mi_make_breakpoint
This function builds breakpoint regexps, such as
"bkpt={number=\".*\", [snip]}".
Note that ONLY the options given to mi_make_breakpoint/mi_create_breakpoint
will actually be tested. So if -number is omitted, the regexp will allow
anything [number=\".*\"]
Examples:
mi_make_breakpoint -number 3
mi_create_breakpoint "myfile.c:21" -file myfile.c -line 21
----- 4/5: mi_make_breakpoint_table
This function builds MI breakpoint table regexps.
Example:
set bps {}
lappend bps [mi_make_breakpoint -number 1 -func "main" \
-file ".*/myfile.c" -line 42
lappend bps [mi_make_breakpoint -number 2 -func "marker" \
-file ".*myfile.c" -line 21
gdb_test "-break-info" "\\^done,[mi_make_breakpoint_table $bps]" \
"breakpoint list"
----- 5/5: Update all callers
Self-explanatory
testsuite/ChangeLog
2014-04-23 Keith Seitz <keiths@redhat.com>
* lib/mi-support.exp (mi_list_breakpoints): Delete.
(mi_make_breakpoint_table): New procedure.
(mi_create_breakpoint): Use mi_make_breakpoint
and return the result.
(mi_make_breakpoint): New procedure.
(mi_build_kv_pairs): New procedure.
* gdb.mi/mi-break.exp: Remove unused globals,
update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
All callers updated.
* gdb.mi/mi-dprintf.exp: Use variable to track command
number.
Update all callers of mi_create_breakpoint and use
mi_make_breakpoint_table.
Remove any unused global variables.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-reverse.exp: Likewise.
* gdb.mi/mi-simplerun.exp: Likewise.
* gdb.mi/mi-stepn.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Likewise.
* gdb.mi/mi-until.exp: Likewise.
* gdb.mi/mi-var-cp.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi2-amd64-entry-value.exp: Likewise.
* gdb.mi/mi2-var-child.exp: Likewise.
* gdb.mi/mi-vla-c99.exp: Likewise.
* lib/mi-support.exp: Likewise.
From Ian Lance Taylor <iant@cygnus.com>:
* lib/gdb.exp (parse_args): New procedure.
|
|
Nothing calls this outside mem-break.c.
gdb/gdbserver/
2014-04-23 Pedro Alves <palves@redhat.com>
* mem-break.c (find_gdb_breakpoint_at): Make static.
* mem-break.h (find_gdb_breakpoint_at): Delete declaration.
|
|
numbers.
My main motivation here is moving in the direction of decoupling
insert_point/remove_point from packet numbers, though this bit alone
should make it a little bit easier to merge gdb/gdbserver/i386-low.c
and gdb/i386-nat.c (which are largely the same).
Tested on x86_64 Fedora 17, and cross built for i686-mingw32 too.
gdb/gdbserver/
2014-04-23 Pedro Alves <palves@redhat.com>
* i386-low.c: Don't include break-common.h here.
(i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
prototype to take target_hw_bp_type as argument instead of a Z
packet char.
* i386-low.h: Include break-common.h here.
(Z_packet_to_hw_type): Declare.
(i386_low_insert_watchpoint, i386_low_remove_watchpoint): Change
prototypes.
* linux-x86-low.c (x86_insert_point): Convert the packet number to
a target_hw_bp_type before calling i386_low_insert_watchpoint.
(x86_remove_point): Convert the packet number to a
target_hw_bp_type before calling i386_low_remove_watchpoint.
* win32-i386-low.c (i386_insert_point): Convert the packet number
to a target_hw_bp_type before calling i386_low_insert_watchpoint.
(i386_remove_point): Convert the packet number to a
target_hw_bp_type before calling i386_low_remove_watchpoint.
|
|
perror_with_name doesn't return, but unlike gdb's version, it wasn't
marked that way.
gdb/gdbserver/
2014-04-23 Pedro Alves <palves@redhat.com>
* utils.h (perror_with_name): Add ATTRIBUTE_NORETURN.
|
|
Without the code portion of the patch, we get these failures:
FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue
FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here
They all looks like random SIGTRAPs:
continue
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21
21 }
(gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
(This is a regression caused by the remove-symbol-file command
series.)
break-unload-file.exp is about having breakpoints inserted, and then
doing "file". I caught this while writing a test that does "file
PROGRAM", while PROGRAM was already loaded, which internally does
"file" first, because I wanted to force a breakpoint_re_set, but the
test is more explicit in case GDB ever optimizes out that re-set.
The problem is that unloading the file with "file" ends up in
disable_breakpoints_in_freed_objfile, which marks all breakpoint
locations of the objfile as both shlib_disabled, _and_ clears the
inserted flag, without actually removing the breakpoints from the
inferior. Now, usually, in all-stop, breakpoints will already be
removed from the inferior before the user can issue the "file"
command, but, with non-stop, or breakpoints always-inserted on mode,
breakpoints stay inserted even while the user has the prompt. In the
latter case, then, if we let the program continue, and it executes the
address where we had previously set the breakpoint, it'll actually
execute the breakpoint instruction that we left behind...
Now, one issue is that the intent of
disable_breakpoints_in_freed_objfile is really to handle the unloading
of OBJF_USERLOADED objfiles. These are objfiles that were added with
add-symbol-file and that are removed with remove-symbol-file.
"add-symbol-file"'s docs in the manual clearly say these commands are
used to let GDB know about dynamically loaded code:
You would use this command when @var{filename} has been dynamically
loaded (by some other means) into the program that is running.
Similarly, the online help says:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
So it makes sense to, like when shared libraries are unloaded through
the generic solib machinery, mark the breakpoint locations as
shlib_disabled. But, the "file" command is not about dynamically
loaded code, it's about the main program. So the patch makes
disable_breakpoints_in_freed_objfile skip all objfiles but
OBJF_USERLOADED ones, thus skipping the main objfile.
Then, the reason that disable_breakpoints_in_freed_objfile was
clearing the inserted flag isn't clear, but likely to avoid breakpoint
removal errors, assuming remove-symbol-file was called after the
dynamic object was already unmapped from the inferior. In that case,
it'd okay to simply clear the inserted flag, but not so if the user
for example does remove-symbol-file to remove the library because he
made a mistake in the library's address, and wants to re-do
add-symbol-file with the correct address.
To address all that, I propose an alternative implementation, that
handles both cases. The patch includes changes to sym-file.exp to
cover them.
This implementation leaves the inserted flag alone, and handles
breakpoint insertion/removal failure gracefully when the locations are
in OBJF_USERLOADED objfiles, just like we handle insertion/removal
failure gracefully for locations in shared libraries.
To try to make sure we aren't patching back stale shadow memory
contents into the inferior, in case the program mapped a different
library at the same address where we had the breakpoint, without the
user having had a chance of remove-symbol-file'ing before, this adds a
new memory_validate_breakpoint function that checks if the breakpoint
instruction is still in memory. ppc_linux_memory_remove_breakpoint
does this unconditionally for all memory breakpoints, and questions
whether memory_remove_breakpoint should be changed to do this for all
breakpoints. Possibly yes, though I'm not certain, hence this
baby-steps patch.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Tolerate errors if the
breakpoint is set in a user-loaded objfile.
(remove_breakpoint_1): Likewise. Also tolerate errors if the
location is marked shlib_disabled. If the breakpoint is set in a
user-loaded objfile is a GDB-side memory breakpoint, validate it
before uninsertion. (disable_breakpoints_in_freed_objfile): Skip
non-OBJF_USERLOADED objfiles. Don't clear the location's inserted
flag.
* mem-break.c (memory_validate_breakpoint): New function.
* objfiles.c (userloaded_objfile_contains_address_p): New
function.
* objfiles.h (userloaded_objfile_contains_address_p): Declare.
* target.h (memory_validate_breakpoint): New declaration.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.c: New file.
* gdb.base/break-unload-file.exp: New file.
* gdb.base/sym-file-lib.c (baz): New function.
* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
field.
(load): Store the segment's mapped size.
(unload): New function.
(unload_shlib): New function.
* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
* gdb.base/sym-file-main.c (main): Unload, and reload the library,
set a breakpoint at baz, and call it.
* gdb.base/sym-file.exp: New tests for stale breakpoint
instructions.
|
|
libraries.
As explained in
https://sourceware.org/ml/gdb-patches/2008-08/msg00361.html, after a
shared library was unloaded, we can no longer insert or remove
breakpoints into/from its (no longer present) code segment. That'll
fail with memory errors. However, that concern does not apply to
hardware breakpoints. By definition, hardware breakpoints are
implemented using a mechanism that is not dependent on being able to
modify the target's memory. Usually, by setting up CPU debug
registers. IOW, we should be able to set hw breakpoints in an
unmapped address. We don't seem to have a test that exercises that,
so this patch adds one.
I noticed the error supression because of a related issue -- the
target_insert_hw_breakpoint/target_remove_hw_breakpoint interfaces
don't really distinguish "not supported" from "error" return, and so
remote.c returns -1 in both cases. This results in hardware
breakpoints set in shared libraries silently ending up pending forever
even though the target doesn't actually support hw breakpoints.
(gdb) set breakpoint always-inserted on
(gdb) set remote Z-packet off
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y <PENDING> shrfunc
After the patch we get the expected:
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
Warning:
Cannot insert hardware breakpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y 0x00007ffff7dfb657 in shrfunc at ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c:21
(HW breakpoints set in the main executable, when the target doesn't
support HW breakpoints always resulted in the latter output.)
We probably should improve the insert/remove interface to return a
different error code for unsupported. But I chose to fix the error
supression first, as it's a deeper and wider issue.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): If
the breakpoint is set in a shared library, only suppress
errors for software breakpoints, not hardware breakpoints.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
* gdb.base/hbreak-in-shr-unsupported.c: New file.
* gdb.base/hbreak-in-shr-unsupported.exp: New file.
* gdb.base/hbreak-unmapped.c: New file.
* gdb.base/hbreak-unmapped.exp: New file.
* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
|
|
Fix all the cases where endianness needs to be taken into account
in the ARM ld dump tests.
ld/testsuite/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* ld-arm/arm-no-rel-plt.ld: Remove OUTPUT_FORMAT and
SEARCH_DIR commands.
* ld-arm/arm-rel32.d: Update regexps to allow test to
pass on armeb-linux-eabi configuration.
* ld-arm/data-only-map.d: Likewise.
* ld-arm/fix-arm1176-off.d: Likewise.
* ld-arm/fix-arm1176-on.d: Likewise.
* ld-arm/ifunc-1.gd: Likewise.
* ld-arm/ifunc-10.gd: Likewise.
* ld-arm/ifunc-11.gd: Likewise.
* ld-arm/ifunc-12.gd: Likewise.
* ld-arm/ifunc-13.gd: Likewise.
* ld-arm/ifunc-14.gd: Likewise.
* ld-arm/ifunc-15.gd: Likewise.
* ld-arm/ifunc-16.gd: Likewise.
* ld-arm/ifunc-17.gd: Likewise.
* ld-arm/ifunc-2.gd: Likewise.
* ld-arm/ifunc-3.gd: Likewise.
* ld-arm/ifunc-4.gd: Likewise.
* ld-arm/ifunc-5.gd: Likewise.
* ld-arm/ifunc-6.gd: Likewise.
* ld-arm/ifunc-7.gd: Likewise.
* ld-arm/ifunc-8.gd: Likewise.
* ld-arm/ifunc-9.gd: Likewise.
* ld-arm/jump-reloc-veneers-long.d: Likewise.
* ld-arm/reloc-boundaries.d: Likewise.
|
|
Fix various places where endianness needed to be taken into account
in the gas testsuite for ARM.
gas/testsuite/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* gas/arm/backslash-at.d: Fix dump output regexps for
armeb-linux-eabi configuration.
* gas/arm/got_prel.d: Likewise.
* gas/arm/inst-po.d: Likewise.
* gas/arm/unwind.d: Likewise.
|
|
If there is a a trailing align statement in a code section we may
output data padding with a data mapping followed by a code alignment
with a code mapping. The literal pool may then be output with a code
mapping symbol which will cause it to be endian swapped in a big-endian
configuration. When outputting a literal pool make sure that a data
mapping symbol is output in all cases.
gas/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (s_ltorg): Call make_mapping_symbol
directly instead of mapping_state.
gas/testsuite/ChangeLog:
2014-04-23 Will Newton <will.newton@linaro.org>
* gas/arm/mapmisc.d: Check literal pool mapping with
a trailing .align statement.
* gas/arm/mapmisc.s: Likewise.
|
|
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
|
|
Throw away the dwarf2 stash if it becomes invalid due to section
VMAs changing. It would be nice to reclaim all the bfd_alloc
memory here when we throw away the stash, perhaps by putting
everything we alloc on a private dwarf2 objalloc, but I haven't done
that with this patch.
I've also fixed a problem with bfd_perform_relocation losing reloc
addends, which meant a second or subsequent look at debug info
sections did not properly relocate the sections. I can't see why
bfd_perform_relocation should need to change addends except for ld -r,
and the history (985fca12, e98e6ec1) doesn't help much.
Finally, the patch tweaks place_sections to avoid unnecessary work.
If we've mapped input to output sections, then input section VMA
isn't used so there's not much point in adjusting it. Incidentally,
this also means place_sections isn't effective in all cases.
PR ld/16787
* dwarf2.c (struct dwarf2_debug): Add sec_vma field.
(place_sections): Do not modify VMA of sections when called from
linker after sections have been placed in output sections. Short
circuit single section case.
(save_section_vma, section_vma_same): New functions.
(_bfd_dwarf2_slurp_debug_info): Throw away stash if section VMAs
change.
* reloc.c (bfd_perform_relocation): Do not modify reloc addend
when non-relocatable.
|
|
|
|
|
|
Linking object files produced by partial linking with link-time
relaxation enabled sometimes fails with the following error message:
dangerous relocation: call8: misaligned call target: (.text.unlikely+0x63)
This happens because no basic block with an XTENSA_PROP_ALIGN flag in the
property table is generated for the first basic block, even if the
.align directive is present.
It was believed that the first frag alignment could be derived from the
section alignment, but this was not implemented for the partial linking
case: after partial linking first frag of a section may become not
first, but no additional alignment frag is inserted before it.
Basic block for such frag may be merged with previous basic block into
extended basic block during relaxation pass losing its alignment
restrictions.
Fix this by always recording alignment for the first section frag.
2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (xtensa_handle_align): record alignment for the
first section frag.
gas/testsuite/
* gas/xtensa/all.exp: Add test for the first section frag alignment.
* gas/xtensa/first_frag_align.d: First section frag alignment expected
dump.
* gas/xtensa/first_frag_align.s: First section frag alignment test
source.
|
|
If a thread trips on a breakpoint that needs stepping over just after
finishing a step over, GDB currently fails an assertion. This is a
regression caused by the "Handle multiple step-overs." patch
(99619beac6252113fed212fdb9e1ab97bface423) at
https://sourceware.org/ml/gdb-patches/2014-02/msg00765.html.
(gdb) x /4i $pc
=> 0x400540 <main+4>: movl $0x0,0x2003da(%rip) # 0x600924 <i>
0x40054a <main+14>: movl $0x1,0x2003d0(%rip) # 0x600924 <i>
0x400554 <main+24>: movl $0x2,0x2003c6(%rip) # 0x600924 <i>
0x40055e <main+34>: movl $0x3,0x2003bc(%rip) # 0x600924 <i>
(gdb) PASS: gdb.base/consecutive-step-over.exp: get breakpoint addresses
break *0x40054a
Breakpoint 2 at 0x40054a: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 23.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 1: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 1: set condition
break *0x400554
Breakpoint 3 at 0x400554: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 24.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 2: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 2: set condition
break *0x40055e
Breakpoint 4 at 0x40055e: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 25.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 3: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 3: set condition
break 27
Breakpoint 5 at 0x400568: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 27.
(gdb) continue
Continuing.
../../src/gdb/infrun.c:5200: internal-error: switch_back_to_stepped_thread: Assertion `!tp->control.trap_expected' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
FAIL: gdb.base/consecutive-step-over.exp: continue to breakpoint: break here (GDB internal error)
The assertion fails, because the code is not expecting that the event
thread itself might need another step over. IOW, not expecting that
TP in:
tp = find_thread_needs_step_over (stepping_thread != NULL,
stepping_thread);
could be the event thread.
A small fix for this would be to clear the event thread's
trap_expected earlier, before asserting. But looking deeper, although
currently_stepping_or_nexting_callback's intention is finding the
thread that is doing a step/next, it also returns the thread that is
doing a step-over dance, with trap_expected set. If there ever was a
reason for that (it was I who added
currently_stepping_or_nexting_callback , but I can't recall why I put
trap_expected there in the first place), the only remaining reason
nowadays is to aid in implementing switch_back_to_stepped_thread's
assertion that is now triggering, by piggybacking on the walk over all
threads, thus avoiding a separate walk. This is quite obscure, and I
think we can do even better, by merging the walks that look for the
stepping thread, and the walk that looks for some thread that might
need a step over.
Tested on x86_64 Fedora 17, native and gdbserver, and also native on
top of my "software single-step on x86_64" series.
gdb/
2014-04-22 Pedro Alves <palves@redhat.com>
* infrun.c (schedlock_applies): New function, factored out from
find_thread_needs_step_over.
(find_thread_needs_step_over): Use it.
(switch_back_to_stepped_thread): Always clear trap_expected if the
step over is finished. Return early if scheduler locking applies.
Look for the stepping thread and a potential step-over thread with
a single loop.
(currently_stepping_or_nexting_callback): Delete.
2014-04-22 Pedro Alves <palves@redhat.com>
* gdb.base/consecutive-step-over.c: New file.
* gdb.base/consecutive-step-over.exp: New file.
|
|
This switches the gdb_continue_to_breakpoint routine to use
gdb_test_multiple instead of send_gdb/gdb_expect, so that an internal
error is detected immediately, instead of failing on timeout.
gdb/testsuite/
2014-04-22 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
instead of send_gdb/gdb_expect.
|
|
2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
gas/
* config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
unbreak self-test mode.
gas/testsuite/
* gas/nios2/selftest.s: New.
* gas/nios2/selftest.d: New.
|
|
PR ld/16846
* ld-plugin/lto.exp (lto_link_tests): Add tests for PR ld/16846.
* ld-plugin/pr16846a.c: New file.
* ld-plugin/pr16846b.c: Likewise.
* ld-plugin/pr16846c.c: Likewise.
|
|
PR ld/16821
* peXXigen.c (_bfd_XXi_swap_sym_out): Fix for 32-bit hosts.
|
|
with support for the new or1k configuration.
|
|
supports instruction tracing with or without disassembly alongside.
* NEWS: Mention that ARM sim now supports tracing.
|
|
PR ld/16821
* peXXigen.c (abs_finder): Fix for 32-bit host builds.
|
|
This function seems to be a left over from some previous
functionality that no longer exists - the comment above seems to
make no sense with the current code. Remove the function as it
breaks handling of SystemTap static probe note sections.
bfd/ChangeLog:
2014-04-22 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_section_flags): Remove
function. (elf_backend_section_flags): Remove define.
|
|
In gdb.trace/tfile.exp, we execute binary to generate tracefile,
remote_exec target "$binfile"
however, this fails on bare metal target. This patch is to
handle binary execution failure by running binary in GDB.
The binary will do some io operation to generate tracefile, so
we need a check 'target_info exists gdb,nofileio'.
This patch is to check whether tracefile is generated. tfile.exp can
be skipped if generation is failed, while test_tfind_tfile in
mi-traceframe-changed.exp is skipped if generated failed. The rest of
the mi-traceframe-changed.exp can still be executed, because on some
bare metal targets, the remote stub supports tracepoint but doesn't
support fileio.
gdb/testsuite:
2014-04-22 Yao Qi <yao@codesourcery.com>
* lib/trace-support.exp (generate_tracefile): New procedure.
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
* gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
if generate_tracefile returns 1.
|
|
Functions ctf_fetch_registers and tfile_fetch_registers have some
duplicated code about guessing the PC in regcache. Sometimes, we
may change one function and forget to update the other one, like this
https://www.sourceware.org/ml/gdb-patches/2014-01/msg00292.html
This patch is to move the duplicated code into a new function
tracefile_fetch_registers, and let both ctf_fetch_registers and
tfile_fetch_registers call it.
gdb:
2014-04-22 Yao Qi <yao@codesourcery.com>
* tracefile-tfile.c (tfile_fetch_registers): Move the bottom to ...
* tracefile.c (tracefile_fetch_registers): ... it. New function.
* tracefile.h (tracefile_fetch_registers): Declare.
* ctf.c (ctf_fetch_registers): Remove the bottom. Call
tracefile_fetch_registers.
|
|
|
|
ld/
* emultempl/alphaelf.em (alpha_after_parse): Enable 2 relax passes.
bfd/
* elf64-alpha.c (elf64_alpha_size_got_sections): New may_merge
parameter; honor it and disable got merging when false.
(elf64_alpha_relax_got_load): Do not relax to GPREL relocs during
the first pass of relaxation.
(elf64_alpha_relax_with_lituse): Likewise. Move relaxed relocs to
the end of the LITERAL+LITUSE chain.
(elf64_alpha_relax_section): Only process LITERAL relocs during the
second pass of relaxation.
|
