aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-26sim: cris: do not pass cpu when writing memory during initMike Frysinger2-5/+10
The point of passing down the cpu to core reads/writes is to signal which cpu is making the access. For system accesses (such as internal memory initialization), passing the cpu down doesn't make sense, and in the case of early init like cris, can cause crashes. Since the cpu isn't fully set up at this point, if the core code tries to access some fields (like the PC reg), it'll crash. While cris shouldn't be doing this setup here (it should be in the inferior stage), we'll deal with that later.
2015-12-26sim: standardize sim_create_inferior handling of argv a bit moreMike Frysinger18-34/+106
For targets that process argv in sim_create_inferior, improve the code: - provide more details in the comment - make the check for when to re-init more robust - clean out legacy sim_copy_argv code This will be cleaned up more in the future when we have a common inferior creation function, but at least help new ports get it right until then.
2015-12-26sim: aarch64: move ChangeLog contentMike Frysinger2-26/+25
2015-12-26Add test for ARMv6-M farcall with no profile infoThomas Preud'homme5-0/+52
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> ld/testsuite/ * ld-arm/arm-elf.exp: Run new test "Thumb-Thumb farcall v6-M (no profile)". * ld-arm/farcall-thumb-thumb-m-no-profile-a.s: New file. * ld-arm/farcall-thumb-thumb-m-no-profile-b.s: Likewise. * ld-arm/farcall-thumb-thumb-m-no-profile.d: Likewise.
2015-12-26Automatic date update in version.inGDB Administrator1-1/+1
2015-12-25Document that the PATTERN argument to gdb_test is optional.Sandra Loosemore2-1/+8
2015-12-25 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * lib/gdb.exp (gdb_test): Update comments to clarify that the PATTERN argument is optional.
2015-12-25sim: frv: punt WITH_DEVICE supportMike Frysinger6-95/+10
The frv port used the device logic to support a single cache address, and the comments around that are "these were merely copied from a diff port and are unused", plus the code to attach the memory is "#if 0". Just punt it all.
2015-12-25sim: m32r: migrate from WITH_DEVICES to WITH_HWMike Frysinger12-178/+361
The m32r port was using the device framework to handle two devices: the cache and uart registers. Both can be implemented in the newer hardware framework instead which allows us to drop the device logic entirely, as well as delete the tconfig.h file. While creating the new uart device model, I also added support for using stdin to read/write data rather than only supporting sockets. This has been lightly tested as there doesn't appear to be test coverage for the code already. If anyone still cares about this port, then they should (hopefully) file bug reports.
2015-12-25sim: cris: migrate from WITH_DEVICES to WITH_HWMike Frysinger10-126/+113
The cris port was using the device framework to handle two addresses when the --cris-900000xx flag was specified. That can be implemented using the newer hardware framework instead which allows us to drop the device logic entirely, as well as delete the tconfig.h file. Basically we create a new cris_900000xx device model and move the read logic out of devices.c and into that. The rest of the devices logic was callback to the hardware framework already.
2015-12-25sim: cris: clean up rvdummy a bitMike Frysinger2-2/+6
This fixes a few warnings when compiling the rvdummy tool.
2015-12-25sim: cris: set up sane default path to rvdummyMike Frysinger2-1/+14
Much like we autodetect the path to the run program when there is none set explicitly, do the same for the rvdummy program. Otherwise the default make check fails to execute the helper properly.
2015-12-25sim: hw-properties: delete trace callsMike Frysinger2-4/+8
These trace calls don't seem to add anything useful and break the cris hw tests, so punt them. They were disabled before commit 6d519a4606b9 but were re-enabled as part of TRACE macro cleanups.
2015-12-25sim: drop WITH_ENGINE defineMike Frysinger3-15/+5
We enable this everywhere already, and all new ports should use the engine logic, so no point in making it an option to disable.
2015-12-25sim: sim-model: build for everyoneMike Frysinger29-49/+75
Rather than include this for some targets, set it up so we can build it all the time via the common code. This makes it easier for targets to opt into it when they're ready, increases build coverage, and allows us to centralize much of the logic. We also get to delete tconfig.h from two more targets -- they were setting WITH_DEVICES to 0 which has the same behavior as not defining it at all. While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it is only used by the common sim-model code. We use it to declare dummy model lists when the arch hasn't created its own.
2015-12-25sim: move MACH/MODEL types into SIM_xxx namespaceMike Frysinger33-116/+172
The "MACH" and "MODEL" names are a bit generic and collide with symbols used by other sections of code (like h8300's opcodes). Since these are sim-specific types, they really should have a "SIM_" prefix.
2015-12-25sim: arm: delete unused codeMike Frysinger23-3651/+34
These vestiges of the 20 year old emulator are just getting in the way. Punt all the dead code we either don't compile or don't use.
2015-12-25sim: move WITH_SCACHE_PBB to sim-main.hMike Frysinger18-49/+57
This helps us break up tconfig.h more. Any file using this define should be pulling in sim-main.h already, so things should continue working.
2015-12-25sim: device_error: puntMike Frysinger12-52/+32
Only four targets implement this function, and three of them do nothing. The 4th merely calls abort. Since calls to this function are followed by calls to sim_hw_abort or sim_io_error, this is largely useless. In the two places where we don't, replace the call with sim_engine_abort. We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this is a good first step.
2015-12-25sim: always enable callback memoryMike Frysinger4-13/+13
We enable WITH_CALLBACK_MEMORY everywhere and don't provide a way to turn it off, and no target does so. Make it unconditional for all to keep things simple.
2015-12-25sim: dv-pal: always use CPU_INDEXMike Frysinger2-5/+7
Since the core always provides CPU_INDEX, use it. The current code doesn't actually use it even though it should since it doesn't include the right headers.
2015-12-24sim: mips: delete TARGET_TX3904 defineMike Frysinger3-2/+5
With the LMA cleanup, we no longer need this define.
2015-12-24sim: mips: move SIM_QUIET_NAN_NEGATED to sim-main.hMike Frysinger3-4/+8
We want to kill off tconfig.h, so move the one define mips still uses to sim-main.h.
2015-12-24sim: make LMA loading the default for all targetsMike Frysinger25-42/+72
Most targets already default to loading code via their LMA, but for a few, this means the default changes from loading VMA to LMA. It's better to have the different targets be consistent, and allows some code clean up.
2015-12-24sim: cris: move option install to sim_openMike Frysinger5-19/+18
We've moved custom option install for other targets to sim_open, so update cris too. It's the last one using MODULE_LIST, so we can drop that from the common code too.
2015-12-24sim: delete old breakpoint codeMike Frysinger11-83/+26
This code relies on the old sim-break module, but that was deleted in 2003. The module only existed for gdb to tell the sim to set breakpoints on its behalf, but then that logic was abandoned in favor of gdb knowing all about proper breakpoints (since it does already for non-sim targets). Some dead code lived on in the older ports though -- clean it up now.
2015-12-24sim: h8300: move h8300-specific options out of common codeMike Frysinger5-34/+69
Register the options in sim_open like other arches to avoid having to hack up the common modules.
2015-12-24sim: enable watchpoint module everywhereMike Frysinger18-35/+37
We build & bundle the watchpoint module everywhere, but we don't make the command line flags available by default. A few targets opted in, but most did not. Just enable the flag for everyone. Not all targets will respect the flags (making them nops), but shouldn't be a big deal. This is how we handle other common modules already.
2015-12-24sim: delete SIM_HAVE_FLATMEM supportMike Frysinger6-54/+13
No target has used this, and it's a cheap hack in place in using the common memory module. We want everyone using that though, so drop support for flatmem entirely.
2015-12-24sim: delete SIM_HAVE_MEM_SIZEMike Frysinger8-28/+16
This define isn't used anywhere (doesn't seem to ever have been used by versions committed), so delete the commented out code as it's dead.
2015-12-24sim: delete SIM_HAVE_SIMCACHEMike Frysinger6-18/+12
This was used by the old run interface, but we punted that awhile ago, so drop this define too.
2015-12-25Automatic date update in version.inGDB Administrator1-1/+1
2015-12-24Add support for linking ARMv8-M object filesThomas Preud'homme13-15/+149
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (using_thumb_only): Check that profile is 'M' and update logic around Tag_CPU_arch values to return TRUE for ARMv8-M architectures. (tag_cpu_arch_combine): Define v8m_baseline and v8m_mainline and update v4t_plus_v6_m and comb to deal with ARMv8-M Tag_CPU_arch merging logic. (elf32_arm_merge_eabi_attributes): Add Tag_CPU_name values for ARMv8-M. bfd/testsuite/ * ld-arm/arm-elf.exp (armeabitests_common): Run new tests "Thumb-Thumb farcall v8-M", "EABI attribute merging 8", "EABI attribute merging 9" and "EABI attribute merging 10". (Thumb-Thumb farcall v8-M): Renamed to ... (Thumb-Thumb farcall v8-M Mainline): This. (Thumb-Thumb farcall v8-M Baseline): New test. * ld-arm/attr-merge-8a.s: New file. * ld-arm/attr-merge-8b.s: Likewise. * ld-arm/attr-merge-8.attr: Likewise. * ld-arm/attr-merge-9a.s: Likewise. * ld-arm/attr-merge-9b.s: Likewise. * ld-arm/attr-merge-9.out: Likewise. * ld-arm/attr-merge-10a.s: Likewise. * ld-arm/attr-merge-10b.s: Likewise. * ld-arm/attr-merge-10.attr: Likewise.
2015-12-24Add assembler support for ARMv8-M BaselineThomas Preud'homme17-56/+290
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards to merging with ARMv8-M Baseline. binutils/ * readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch value. gas/ * config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions shared between ARMv6T2 and ARMv8-M. (move_or_literal_pool): Check mov.w/mvn and movw availability against arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking arm_arch_t2. (do_t_branch): Error out for wide conditional branch instructions if targetting ARMv8-M Baseline. (non_v6t2_wide_only_insn): Add the logic for new wide-only instructions in ARMv8-M Baseline. (wide_insn_ok): New function. (md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and adapt error message for unsupported wide instruction to ARMv8-M Baseline. (insns): Reorganize instructions shared by ARMv8-M Baseline and ARMv6t2 architecture. (arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and marvell-whitney cores. (arm_archs): Define armv8-m.base architecture. (cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version. (aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well. gas/testsuite/ * gas/arm/archv8m-base.d: New file. * gas/arm/attr-march-armv8m.base.d: Likewise. * gas/arm/armv8m.base-idiv.d: Likewise. * gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline. include/elf/ * arm.h (TAG_CPU_ARCH_V8M_BASE): Declare. include/opcode/ * arm.h (ARM_EXT2_V6T2_V8M): New extension bit. (ARM_AEXT2_V8A): New architecture extension bitfield. (ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS. (ARM_AEXT_V8M_BASE): New architecture extension bitfield. (ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M. (ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension bitfield. (ARM_ARCH_V6KT2): Likewise. (ARM_ARCH_V6ZT2): Likewise. (ARM_ARCH_V6KZT2): Likewise. (ARM_ARCH_V7): Likewise. (ARM_ARCH_V7A): Likewise. (ARM_ARCH_V7VE): Likewise. (ARM_ARCH_V7R): Likewise. (ARM_ARCH_V7M): Likewise. (ARM_ARCH_V7EM): Likewise. (ARM_ARCH_V8A): Likewise. (ARM_ARCH_V8M_BASE): New architecture bitfield. (ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M. (ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension bitfield and reindent. (ARM_ARCH_V7A_MP_SEC): Likewise. (ARM_ARCH_V7R_IDIV): Likewise. (ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS. (ARM_ARCH_V8A_SIMD): Likewise. (ARM_ARCH_V8A_CRYPTOV1): Likewise. opcodes/ * arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex, ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24Add assembler support for ARMv8-M MainlineThomas Preud'homme18-58/+318
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in comb array. binutils/ * readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch value. (arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use value. gas/ * config/tc-arm.c (arm_ext_m): Include ARMv8-M. (arm_ext_v8m): New feature for ARMv8-M. (arm_ext_atomics): New feature for ARMv8 atomics. (do_tt): New encoding function for TT* instructions. (insns): Add new entries for ARMv8-M specific instructions and reorganize the ones shared by ARMv8-M Mainline and ARMv8-A. (arm_archs): Define armv8-m.main architecture. (cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and clarify the ordering rule. (aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile to 'A' if extension bit for atomic instructions is set, unless it is ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0 for ARMv8-M Mainline. gas/testsuite/ * gas/arm/archv8m.s: New file. * gas/arm/archv8m-main.d: Likewise. * gas/arm/attr-march-armv8m.main.d: Likewise. * gas/arm/any-armv8m.s: Likewise. * gas/arm/any-armv8m.d: Likewise. include/elf/ * arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare. (MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN. (TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15. include/opcode/ * arm.h (ARM_EXT2_ATOMICS): New extension bit. (ARM_EXT2_V8M): Likewise. (ARM_EXT_V8): Adjust comment with regards to atomics and remove mention of legacy use for that bit. (ARM_AEXT2_V8_1A): New architecture extension bitfield. (ARM_AEXT2_V8_2A): Likewise. (ARM_AEXT_V8M_MAIN): Likewise. (ARM_AEXT2_V8M): Likewise. (ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield. (ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A. (ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A. (ARM_ARCH_V8M_MAIN): New architecture feature bitfield. (ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield and reindent. (ARM_ARCH_V8A_SIMD): Likewise. (ARM_ARCH_V8A_CRYPTOV1): Likewise. (ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of feature bits. (ARM_ARCH_V8_1A_SIMD): Likewise. (ARM_ARCH_V8_1A_CRYPTOV1): Likewise. opcodes/ * arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl, stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of ARM_EXT_V8. (thumb32_opcodes): Add entries for wide ARMv8-M instructions.
2015-12-24Consolidate Thumb-1/Thumb-2 ISA detectionThomas Preud'homme4-33/+68
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw availability against arm_ext_v6t2 instead of checking arm_arch_t2, fixing comments along the way. (handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to generate IT instruction. (t1_isa_t32_only_insn): New function. (md_assemble): Use above new function to check for invalid wide instruction for CPU Thumb ISA and to determine what Thumb extension bit is necessary for that instruction. (md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if branch is out of range. include/opcode/ * arm.h (ARM_ARCH_THUMB2): Add comment explaining its meaning and remove extension bit not including any Thumb-2 instruction.
2015-12-24Add tests for gas arch autodetection on ARMThomas Preud'homme23-0/+152
2015-12-09 Andre Vieira <andre.simoesdiasvieira@arm.com> gas/testsuite/ * gas/arm/automatic-bw.d: New. * gas/arm/automatic-bw.s: New. * gas/arm/automatic-cbz.d: New. * gas/arm/automatic-cbz.s: New. * gas/arm/automatic-clrex.d: New. * gas/arm/automatic-clrex.s: New. * gas/arm/automatic-lda.d: New. * gas/arm/automatic-lda.s: New. * gas/arm/automatic-ldaex.d: New. * gas/arm/automatic-ldaex.s: New. * gas/arm/automatic-ldaexb.d: New. * gas/arm/automatic-ldaexb.s: New. * gas/arm/automatic-ldrex.d: New. * gas/arm/automatic-ldrex.s: New. * gas/arm/automatic-ldrexd.d: New. * gas/arm/automatic-ldrexd.s: New. * gas/arm/automatic-movw.d: New. * gas/arm/automatic-movw.s: New. * gas/arm/automatic-sdiv.d: New. * gas/arm/automatic-sdiv.s: New. * gas/arm/automatic-strexb.d: New. * gas/arm/automatic-strexb.s: New.
2015-12-24[testsuite/Ada] stop using project files when building test programsJoel Brobecker5-31/+34
The current approach when building Ada programs for testing is based on the use of a project file (testsuite/gdb.ada/gnat_ada.gpr). To do that, we pass a number of additional arguments to target_compile, one of them being the project file (via "-P/path/to/gnat_ada.gpr"). This used to work well-enough, but AdaCore is currently working towards removing project-file support from gnatmake (the prefered tool for using project files is gprbuild). So, we need to either switch the compilation to gprbuild, or stop using project files. First, using gprbuild is not always what users will be using to build their applications. So having the option of using gnatmake provides more flexibility towards exactly reproducing past bugs. If we ever need a testcase that requires the use of gprbuild, then I believe support for a new target needs to be added to dejagnu's target_compile. Also, the only real reason behind using a project file in the first place is that we wanted to make it easy to specify the directory where all compilation artifacts get stored. This is a consequence of the organization choice we made for gdb.ada to keep each testcase well organized. It is very easy to achieve that goal without using project files. This is therefore what this patch does: It change gdb_compile_ada to build any program using gnatmake without using a project file (by temporarily changing the current working directory). There is a small (beneficial) side-effect; in the situation where GDB is built in-tree, gnatmake is called as... % gnatmake [...] unit.adb ... which means that the debugging info in unit.o will say contain a filename whose name is 'unit.adb', rather than '/path/to/unit.adb'. This also better matches what users might typically do. But the side- effect is that the unit name in the GDB output is not always a full path. This patch tweaks a couple of testcases to make the path part optional. gdb/testsuite: * lib/ada.exp (target_compile_ada_from_dir): New function. (gdb_compile_ada): Reimplement avoiding the use of project files. * gdb.ada/gnat_ada.gpr: Delete. * gdb.ada/cond_lang.exp: Adjust test to make path before filename optional. * gdb.ada/small_reg_param.exp: Likewise. Tested on x86_64-linux, with both in-tree and out-of-tree builds.
2015-12-24Automatic date update in version.inGDB Administrator1-1/+1
2015-12-23Automatic date update in version.inGDB Administrator1-1/+1
2015-12-22Remove HP-UX reference in foll-vfork.expSimon Marchi2-36/+10
One more I just found. Tested with native, native-gdbserver and native-extended-gdbserver on Linux. gdb/testsuite/ChangeLog: * gdb.base/foll-vork.exp: Remove HP-UX special case.
2015-12-22ARM: Fix exidx coverage for relocatable builds.Yury Usishchev13-51/+228
bfd * elf-bfd.h: Add callback to count additional relocations. * elf32-arm.c (_arm_elf_section_data): Add new counter. (insert_cantunwind_after): Increment relocations counter. (elf32_arm_fix_exidx_coverage): Remove exidx entries and add terminating CANTUNWIND entry only in final builds. (elf32_arm_add_relocation): New function. (elf32_arm_write_section): Add relocations in relocatable builds. (elf32_arm_count_additional_relocs): New function. (elf_backend_count_additional_relocs): New define. * bfd/elflink.c (bfd_elf_final_link): Use callback and adjust size of .rel section. * bfd/elfxx-target.h (elf_backend_count_additional_relocs): New define. ld * emultempl/armelf.em (gld${EMULATION_NAME}_after_allocation): Call elf32_arm_fix_exidx_coverage for relocatable builds. ld/testsuite * ld-arm/arm-elf.exp: New test. * ld-arm/unwind-rel.d: New file. * ld-arm/unwind-rel1.s: New file. * ld-arm/unwind-rel2.s: New file. * ld-arm/unwind-rel3.s: New file.
2015-12-22[lynxos] gdbserver hangs when killing inferior from GDBJoel Brobecker2-1/+27
With any program under GDBserver control on LynxOS, killing the program from the debugger (using the "kill" command) causes GDBserver to properly kill the inferior but GDBserver then hangs. This change of behavior occured after the following change was applied: commit f0ea042932e6922c90df3fd0001497d287b97677 Date: Mon Nov 30 16:05:27 2015 +0000 Subject: gdbserver: don't exit until GDB disconnects One of the changes introduced by the commit above is that process_serial_event no longer calls exit after handling the vKill packet. Instead, what happens is that we wait until captured_main finds that we no longer have any inferior to debug, at which point it throws_quit. This (normal) exception is then expected to propagate all the way to the exception handle in function "main", which calls exit. However, before the exception gets propagated, the cleanups are first executed, and one of the cleanups in question is detach_or_kill_for_exit_cleanup, which was put in place by captured_main. detach_or_kill_for_exit_cleanup is basically a wrapper around detach_or_kill_for_exit, which iterates over all inferiors, and kills them all. In our case, we have only one inferior, which we have already killed during the handling for the "vKill" packet. Unfortunately, we did not properly clean our internal data for that inferior up, and so detach_or_kill_for_exit thinks that we still have one inferior, and therefore tries to kill it. This results in lynx_kill being called, doing the following: lynx_ptrace (PTRACE_KILL, ptid, 0, 0, 0); lynx_wait (ptid, &status, 0); the_target->mourn (process); The hang is caused by the call to lynx_wait, which waits for an event from a process which does not exist... This patch fixes the issue by enhancing lynx_mourn to clean the threads and process list up. gdb/gdbserver/ChangeLog: * lynx-low.c (lynx_delete_thread_callback): New function. (lynx_mourn): Properly delete our process and all of its threads. Remove call to clear_inferiors.
2015-12-22gdbserver crash in gdb/gdbserver/thread.c::thread_search_callbackJoel Brobecker2-1/+9
Connecting GDB to a LynxOS-178 GDBserver causes GDBserver to crash: % gdbserver :4444 simple_main Process simple_main created; pid = 19 Listening on port 4444 Remote debugging from host 205.232.38.10 Segmentation fault (core dumped) The crash happens in thread_search_callback where the function calls the_target->thread_stopped (via the thread_stopped macro) without verifying whether the callback is NULL or not. For the record, the regression was introduced by: commit a67a9faef0e32886c83611cc7a0ba61e91123063 Date: Mon Nov 30 16:05:26 2015 +0000 Subject: gdbserver:prepare_access_memory: pick another thread This patch avoids the crash by checking the value of the callback first, before calling it. gdb/gdbserver/ChangeLog: * target.c (thread_search_callback): Add check that the thread_stopped target callback is not NULL before calling it.
2015-12-22[win32] cannot automatically find executable file [...] warning at GDB startupJoel Brobecker2-1/+7
The following change... commit 43499ea30db2a866412c86952c7e1d7b158d806f Date: Tue Nov 17 15:17:44 2015 +0000 Subject: [C++/mingw] windows-nat.c casts ... causes a small regression in GDB, where we get the following warning at startup: % gdb C:\[...]\gdb.exe: warning: cannot automatically find executable file or library to read symbols. Use "file" or "dll" command to load executable/libraries directly. GNU gdb (GDB) 7.10.50.20151218-cvs (with AdaCore local changes) [...] (gdb) The warning comes from _initialize_loadable which tries to dynamically load some symbols from kernel32.dll and psapi.dll, and in particular: hm = LoadLibrary ("psapi.dll"); if (hm) { GPA (hm, EnumProcessModules); GPA (hm, GetModuleInformation); GPA (hm, GetModuleFileNameEx); } The problem is that the new GPA macro assumes that the name of the variable we use to point to the function, and the name of its associated symbol are the same. This is mostly the case, except for GetModuleFileNameEx, where the name is provided by the GetModuleFileNameEx_name macro (defined differently depending on whether we are on cygwin or not). As a result, the dynamic resolution for GetModuleFileNameEx returns NULL, and we trip the following check which leads to the warning: if (!EnumProcessModules || !GetModuleInformation || !GetModuleFileNameEx) { [...] warning(_("[...]")); } This patch fixes the problem by calling GetProcAddress directly, rather than through the GPA macro, but in a way which hopefully avoids the C++ compilation warning that the previous patch was trying to get rid of. gdb/ChangeLog: * windows-nat.c (_initialize_loadable): Fix computing of GetModuleFileNameEx.
2015-12-22RXv2 support updateYoshinori Sato4-8/+24
2015-12-22 Yoshinori Sato <ysato@users.sourceforge.jp> opcodes/ * rx-decode.opc (movco): Use uniqe id. (movli): Likewise. (stnz): Condition fix. (mvtacgu): Destination fix. * rx-decode.c: Regenerate. bfd/ * archures.c: Add bfd_mach_rx_v2. * bfd-in2.h: Regenerate. * cpu-rx.c (arch_info_struct): Add v2 information. * elf32-rx.c (elf32_rx_machine): Add v2 support.
2015-12-22Add support for ARM's NOREAD section flag.Mickael Guene20-5/+251
include/elf * arm.h: Add arm SHF_ARM_NOREAD section flag. bfd * bfd-in2.h: Regenerate. * section.c: Add SEC_ELF_NOREAD. * elf32-arm.c (elf32_arm_post_process_headers): Only set PF_X attribute if a segment only contains section with SHF_ARM_NOREAD flag. (elf32_arm_fake_sections): Add SEC_ELF_NOREAD conversion. (elf32_arm_section_flags): New function to convert SHF_ARM_NOREAD to bfd flag. (elf32_arm_lookup_section_flags): New function to allow INPUT_SECTION_FLAGS directive with SHF_ARM_NOREAD flag. (elf32_arm_special_sections): Add special sections array to catch section prefix by '.text.noread' pattern. ld/testsuite * ld-arm/arm-elf.exp: New tests. * ld-arm/thumb1-input-section-flag-match.d: New * ld-arm/thumb1-input-section-flag-match.s: New * ld-arm/thumb1-noread-not-present-mixing-two-section.d: New * ld-arm/thumb1-noread-not-present-mixing-two-section.s: New * ld-arm/thumb1-noread-present-one-section.d: New * ld-arm/thumb1-noread-present-one-section.s: New * ld-arm/thumb1-noread-present-two-section.d: New * ld-arm/thumb1-noread-present-two-section.s: New binutils * readelf.c (get_elf_section_flags): Add support for ARM specific section flags.
2015-12-22Add an expect for running commands with CLI jumpThomas Preud'homme2-0/+8
2015-12-22 Thomas Preud'homme <thomas.preudhomme@arm.com> gdb/testsuite/ * lib/mi-support.exp (mi_run_cmd_full): Add an expect for the CLI jump case.
2015-12-22Automatic date update in version.inGDB Administrator1-1/+1
2015-12-21Remove dead code in testsuiteSimon Marchi3-60/+17
This patch removes cases from the testsuite that are not posssibly used. The messages "Catch of * not yet implemented" were removed here: https://www.sourceware.org/ml/gdb-patches/2004-01/msg00679.html I changed the regexp at the same time to match the string more closely. gdb/testsuite/ChangeLog: * gdb.base/break.exp: Remove dead code. * gdb.base/sepdebug.exp: Likewise.
2015-12-21Remove HP-UX references fom testsuiteSimon Marchi36-1048/+146
This patch removes all special cases for HP-UX, for which support has been removed earlier, that I found in the testsuite. Note that the hppa architecture != HP-UX, since other OSes can run on hppa, so I tried to leave everything that is not HP-UX specific. Two complete tests were completely HP-UX specific, so I removed them. I ran the testsuite on Linux x86-64, native and native-gdbserver, and noticed no regressions. gdb/testsuite/ChangeLog: * gdb.asm/asm-source.exp: Remove HP-UX references. * gdb.base/annota1.exp: Likewise. * gdb.base/annota3.exp: Likewise. * gdb.base/attach.exp: Likewise. * gdb.base/bigcore.exp: Likewise. * gdb.base/break.exp: Likewise. * gdb.base/call-ar-st.exp: Likewise. * gdb.base/callfuncs.exp: Likewise. * gdb.base/catch-fork-static.exp: Likewise. * gdb.base/display.exp: Likewise. * gdb.base/foll-exec-mode.exp: Likewise. * gdb.base/foll-exec.exp: Likewise. * gdb.base/foll-fork.exp: Likewise. * gdb.base/foll-vfork.exp: Likewise. * gdb.base/funcargs.exp: Likewise. * gdb.base/hbreak2.exp: Likewise. * gdb.base/inferior-died.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/multi-forks.exp: Likewise. * gdb.base/nodebug.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/solib1.c: Likewise. * gdb.base/step-test.exp: Likewise. * gdb.mi/non-stop.c: Likewise. * gdb.mi/pthreads.c: Likewise. * gdb.multi/bkpt-multi-exec.ex: Likewise. * gdb.threads/pthreads.c: Likewise. * gdb.threads/staticthreads.exp: Likewise. * lib/future.exp: Likewise. * lib/gdb.exp: Likewise. * gdb.base/so-indr-cl.c: Remove. * gdb.base/so-indr-cl.exp: Likewise. * gdb.base/solib.c: Likewise. * gdb.base/solib.exp: Likewise. * gdb.base/solib2.c: Likewise.
generated by cgit v1.1 at 2024-11-22 21:27:18 +0000