| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
parallel_for_each currently requires each thread to process at least
10 elements. However, when indexing, it's fine for a thread to handle
just a single CU. This patch parameterizes this, and updates the one
user.
|
|
The new DWARF scanner needs to save the entire cutu_reader object, not
just parts of it. In order to make this possible, this patch
refactors build_type_psymtabs_reader. This change is done separately
because it is easy to review in isolation and it helps make the later
patches smaller.
|
|
This adds a new overload of dwarf5_djb_hash. This is used in
subsequent patches.
|
|
The new DWARF index code works by keeping names pre-split. That is,
rather than storing a symbol name like "a::b::c", the names "a", "b",
and "c" will be stored separately.
This patch introduces some helper code to split a full name into its
components.
|
|
This patch adds an option to skip_one_die that causes it not to skip
child DIEs. This is needed in the new scanner.
|
|
The new DWARF scanner records names as they appear in DWARF. However,
because Ada is unusual, it also decodes the Ada names to synthesize
package components for them. In order for this to work out properly,
gdb also needs a mode where ada_decode can be instructed not to decode
Ada operator names. That is what this patch implements.
|
|
This changes dwarf2_get_pc_bounds so that it does not directly access
a psymtab or psymtabs_addrmap. Instead, both the addrmap and the
desired payload are passed as parameters. This makes it suitable to
be used by the new indexer.
|
|
This adds a new member to dwarf2_per_cu_data that indicates whether
addresses have been seen for this CU. This is then set by the
.debug_aranges reader. The idea here is to detect when a CU does not
have address information, so that the new indexer will know to do
extra scanning in that case.
|
|
Tom de Vries found a failure that we tracked down to a latent bug in
read_addrmap_from_aranges (previously create_addrmap_from_aranges).
The bug is that this code can erroneously reject .debug_aranges when
dwz is in use, due to CUs at duplicate offsets. Because aranges can't
refer to a CU coming from the dwz file, the fix is to simply skip such
CUs in the loop.
|
|
This patch splits create_addrmap_from_aranges into a wrapper function
and a worker function. The worker function is then used in a later
patch.
|
|
thread-pool.h requires CXX_STD_THREAD in order to even be included.
However, there's no deep reason for this, and during review we found
that one patch in the new DWARF indexer series unconditionally
requires the thread pool.
Because the thread pool already allows a task to be run in the calling
thread (for example if it is configured to have no threads in the
pool), it seemed straightforward to make this code ok to use when host
threads aren't available at all.
This patch implements this idea. I built it on a thread-less host
(mingw, before my recent configure patch) and verified that the result
builds.
After the thread-pool change, parallel-for.h no longer needs any
CXX_STD_THREAD checks at all, so this patch removes these as well.
|
|
|
|
When running test-case gdb.base/stap-probe.exp with make target check-read1, I
run into this and similar:
...
FAIL: gdb.base/stap-probe.exp: without semaphore, not optimized: \
info probes stap (timeout)
...
Fix this by using gdb_test_lines instead of gdb_test.
Tested on x86_64-linux.
|
|
I found a bug in the new DWARF reader series, related to the handling
of enumerator names. This bug caused a crash, so this patch adds a
regression test for this particular case. I'm checking this in.
|
|
A while back, I sent a patch to unify the Ada varsize-limit setting
with the more generic max-value-size:
https://sourceware.org/pipermail/gdb-patches/2021-September/182004.html
However, it turns out I somehow neglected to send part of the patch.
Internally, I also removed the "Ada Settings" node from the manual, as
it only documents the obsolete setting.
This patch removes this text.
|
|
A few Ada tests require some debug info in the GNAT runtime. When run
without this info, these tests can't pass. This patch changes these
tests to detect this situation and stop with "untested".
|
|
PR 28992
* objcopy.c (is_strip_section_1): Do not delete debuglink sections
when stripping debug information.
|
|
With the sole user of the return value gone, convert the return type to
void. This in turn allows simplifying another construct, by moving it
slightly later in the function.
|
|
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .macro, has
undue effects when the logical file/line pair was already overridden:
Line numbers would continuously increment while processing the expanded
macro, while the goal of the PR gas/16908 workaround is to keep the
expansion associated with the line invoking the macro. However, as soon
as enough state was overridden _inside_ the macro to cause as_where() to
no longer fall back top as_where_physical(), honor this by resuming the
bumping of the logical line number.
Note that from_sb_is_expansion's initializer was 1 for an unknown
reason. While renaming the variable and changing its type, also change
the initializer to "expanding_none", which would have been "0" in the
original code. Originally the initializer value itself wasn't ever used
anyway (requiring sb_index != -1), as it necessarily had changed in
input_scrub_include_sb() alongside setting sb_index to other than -1.
Strictly speaking input_scrub_insert_line() perhaps shouldn't use
expanding_none, yet none of the other enumerators fit there either. And
then strictly speaking that function probably shouldn't exist in the
first place. It's used only by tic54x.
|
|
Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
and alike blocks"), while dealing okay with actual assembly source files
not using .file/.line and alike outside but not inside of .irp et al,
has undue effects when the logical file/line pair was already
overridden: Line numbers would continuously increment upon every
iteration, thus potentially getting far off. Furthermore it left it to
the user to actually insert .file/.line inside such constructs. Note
though that before aforementioned change things weren't pretty either:
Diagnostics (and debug info) would be associated with the directive
terminating the iteration construct, rather than with the actual lines.
Handle this automatically by simply latching the present line and then
re-instating coordinates first thing on every iteration; note that the
file can't change from what was previously pushed on the scrubber's
state stack, and hence can be taken from there by using a new flavor of
.linefile (which is far better memory-footprint-wise than recording the
full path in the inserted directive). (This then leaves undisturbed any
file/line control occurring in the body of the construct, as these will
only be seen and processed afterwards.)
|
|
In a few places {disp32} was handled specially when really {disp16}
wants handling just the same.
|
|
gprofng/ChangeLog
2022-04-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
PR gprofng/29026
* configure.ac: Check version of bison.
* src/Makefile.am (QLParser.yy): Run bison
* src/QLParser.yy: Adapted for bison 3.04 or later.
* src/DbeSession.cc: make some params const.
* src/DbeSession.h: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* src/Makefile.in: Regenerate.
* src/QLParser.tab.cc: Deleted.
* src/QLParser.tab.hh: Deleted.
* doc/Makefile.in: Regenerate.
* gp-display-html/Makefile.in: Regenerate.
* libcollector/configure: Regenerate.
|
|
|
|
Earlier versions of the change in
1285ce8629b37f800bf21731ee7c7a8b1b8d0233 used this variable, but not
the final version that landed.
|
|
Replace with equivalent getter/setter macros.
Change-Id: I1042564dd47347337374762bd64ec31b5c573ee2
|
|
Remove MSYMBOL_HAS_SIZE, MSYMBOL_SIZE and SET_MSYMBOL_SIZE, replace them
with equivalent methods.
Change-Id: I6ee1cf82df37e58dff52ea6568ceb4649c7d7538
|
|
Add a getter and a setter for a minimal symbol's type. Remove the
corresponding macro and adjust all callers.
Change-Id: I89900df5ffa5687133fe1a16b2e0d4684e67a77d
|
|
Remove all macros related to getting and setting some symbol value:
#define SYMBOL_VALUE(symbol) (symbol)->value.ivalue
#define SYMBOL_VALUE_ADDRESS(symbol) \
#define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \
#define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
#define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block
#define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
#define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain
#define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue
#define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0)
#define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \
#define BMSYMBOL_VALUE_ADDRESS(symbol) \
#define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \
#define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
#define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
Replace them with equivalent methods on the appropriate objects.
Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
|
|
The earlier version of this document had no sections about the
available Fortran intrinsic functions or the Fortran builtin types.
I added two sections 'Fortran intrinsics' and 'Fortran types' to
document the available Fortran language features. The subsection
'Fortran Defaults' has been integrated into the Fortran subsection.
|
|
When working on the files I noted that there was no actual test for a
COMPLEX built from two INTEGERS. I added that now for completion.
|
|
The operators FLOOR, CEILING, CMPLX, LBOUND, UBOUND, and SIZE accept
(some only with Fortran 2003) the optional parameter KIND. This
parameter determines the kind of the associated return value. So far,
implementation of this kind parameter has been missing in GDB.
Additionally, the one argument overload for the CMPLX intrinsic function
was not yet available.
This patch adds overloads for all above mentioned functions to the
Fortran intrinsics handling in GDB.
It re-writes the intrinsic function handling section to use the helper
methods wrap_unop_intrinsic/wrap_binop_intrinsic/wrap_triop_intrinsic.
These methods define the action taken when a Fortran intrinsic function
is called with a certain amount of arguments (1/2/3). The helper methods
fortran_wrap2_kind and fortran_wrap3_kind have been added as equivalents
to the existing wrap and wrap2 methods.
After adding more overloads to the intrinsics handling, some of the
operation names were no longer accurate. E.g. UNOP_FORTRAN_CEILING
has been renamed to FORTRAN_CEILING as it is no longer a purely unary
intrinsic function. This patch also introduces intrinsic functions with
one, two, or three arguments to the Fortran parser and the
UNOP_OR_BINOP_OR_TERNOP_INTRINSIC token has been added.
|
|
Rename f77_keywords to f_keywords since some of the introduced keywords
in the array are f90 only.
|
|
Currently, when asking GDB to print the type of a Fortran default type
such as INTEGER or REAL, GDB will return the default name of that type,
e.g. "integer"/"real":
(gdb) ptype integer
type = integer
(gdb) ptype real
type = real
For LOGICAL and COMPLEX it would return the actual underlying types
(gdb) ptype logical
type = logical*4
(gdb) ptype complex
type = complex*4
Similarly, GDB would print the default integer type for the underlying
default type:
(gdb) ptype integer*4
type = integer
(gdb) ptype real*4
type = real
(gdb) ptype logical
type = logical*4
(gdb) ptype complex*4
type = complex*4
This is inconsistent and a bit confusing. Both options somehow indicate
what the internal underlying type for the default type is - but I think
the logical/complex version is a bit clearer.
Consider again:
(gdb) ptype integer
type = integer
This indicates to a user that the type of "integer" is Fortran's default
integer type. Without examining "ptype integer*4" I would expect, that
any variable declared integer in the actual code would also fit into a
GDB integer. But, since we cannot adapt out internal types to the
compiler flags used at compile time of a debugged binary, this might be
wrong. Consider debugging Fortran code compiled with GNU and e.g. the
"-fdefault-integer-8" flag. In this case the gfortran default integer
would be integer*8 while GDB internally still would use a builtin_integer,
so an integer of the size of an integer*4 type. On the other hand having
GDB print
(gdb) ptype integer
type = integer*4
makes this clearer. I would still be tempted to fit a variable declared
integer in the code into a GDB integer - but at least ptype would
directly tell me what is going on. Note, that when debugging a binary
compiled with "-fdefault-integer-8" a user will always see the actual
underlying type of any variable declared "integer" in the Fortran code.
So having the code
program test
integer :: a = 5
print *, a ! breakpt
end program test
will, when breaking at breakpt print
(gdb) ptype var
type = integer(kind=4)
or
(gdb) ptype var
type = integer(kind=8)
depending on the compiler flag.
This patch changes the outputs for the REAL and INTEGER default types to
actually print the internally used type over the default type name.
The new behavior for the above examples is:
(gdb) ptype integer
type = integer*4
(gdb) ptype integer*4
type = integer*4
Existing testcases have been adapted to reflect the new behavior.
|
|
The currently implemented intrinsic type handling for Fortran missed some
tokens and their parsing. While still not all Fortran type kinds are
implemented this patch at least makes the currently handled types
consistent. As an example for what this patch does, consider the
intrinsic type INTEGER. GDB implemented the handling of the
keywords "integer" and "integer_2" but missed "integer_4" and "integer_8"
even though their corresponding internal types were already available as
the Fortran builtin types builtin_integer and builtin_integer_s8.
Similar problems applied to LOGICAL, REAL, and COMPLEX. This patch adds
all missing tokens and their parsing. Whenever a section containing the
type handling was touched, it also was reordered to be in a more easy to
grasp order. All INTEGER/REAL/LOGICAL/COMPLEX types were grouped
together and ordered ascending in their size making a missing one more
easy to spot.
Before this change GDB would print the following when tyring to use the
INTEGER keywords:
(gdb) set language fortran
(gdb) ptype integer*1
unsupported kind 1 for type integer
(gdb) ptype integer_1
No symbol table is loaded. Use the "file" command.
(gdb) ptype integer*2
type = integer*2
(gdb) ptype integer_2
type = integer*2
(gdb) ptype integer*4
type = integer
(gdb) ptype integer_4
No symbol table is loaded. Use the "file" command.
(gdb) ptype integer*8
type = integer*8
(gdb) ptype integer_8
No symbol table is loaded. Use the "file" command.
(gdb) ptype integer
type = integer
With this patch all keywords are available and the GDB prints:
(gdb) set language fortran
(gdb) ptype integer*1
type = integer*1
(gdb) ptype integer_1
type = integer*1
(gdb) ptype integer*2
type = integer*2
(gdb) ptype integer_2
type = integer*2
(gdb) ptype integer*4
type = integer*4
(gdb) ptype integer_4
type = integer*4
(gdb) ptype integer*8
type = integer*8
(gdb) ptype integer_8
type = integer*8
(gdb) ptype integer
type = integer
The described changes have been applied to INTEGER, REAL, COMPLEX,
and LOGICAL. Existing testcases have been adapted to reflect the
new behavior. Tests for formerly missing types have been added.
|
|
According to the Fortran standard, logical is of the size of a
'single numeric storage unit' (just like real and integer). For
gfortran, flang and ifx/ifort this storage unit (or the default
logical type) is of size kind 4, actually occupying 4 bytes of
storage, and so the default type for logical expressions in
Fortran should probably also be Logical*4 and not Logical*2. I
adapted GDB's behavior to be in line with
gfortran/ifort/ifx/flang.
|
|
Add a few newlines after the type definitions and remove some
unnecessary linebreaks.
|
|
Before this patch things like
(gdb) ptype complex*8
complex*16
(gdb) ptype complex*4
complex*8
were possible in GDB, which seems confusing for a user. The reason
is a mixup in the implementation of the Fortran COMPLEX type. In
Fortran the "*X" after a type would normally (I don't think this
is language required) specify the type's size in memory. For the
COMPLEX type the kind parameters usually (at least for GNU, Intel, Flang)
specify not the size of the whole type but the size of the individual
two REALs used to form the COMPLEX. Thus, a COMPLEX*4 will usually
consist of two REAL*4s. Internally this type was represented by a
builtin_complex_s8 - but here I think the s8 actually meant the raw
size of the type. This is confusing and I renamed the types (e.g.
builting_complex_s8 became builtin_complex_s4 according to its most
common useage) and their printed names to their language equivalent.
Additionally, I added the default COMPLEX type "COMPLEX" being the same
as a COMPLEX*4 (as is normally the case) and removed the latter. I added
a few tests for this new behavior as well.
The new behavior is
(gdb) ptype complex*8
complex*8
(gdb) ptype complex*4
complex*4
|
|
|
|
Add builtin_integer_s1 of size TARGET_CHAR_BIT to Fortran builtin types.
|
|
Since commit 359efc2d894 ("[gdb/testsuite] Make gdb.base/annota1.exp more
robust") we see this fail with target board unix/-fPIE/-pie:
...
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
...
The problem is that the commit makes the number and order of matched
annotations fixed, while between target boards unix and unix/-fPIE/-pie there
is a difference:
...
\032\032post-prompt
Starting program: outputs/gdb.base/annota1/annota1
+\032\032breakpoints-invalid
+
\032\032starting
\032\032frames-invalid
...
Fix this by optionally matching the additional annotation.
Tested on x86_64-linux.
|
|
As reported in PR29043, when running test-case gdb.dwarf2/dw2-lines.exp with
target board unix/-m32/-fPIE/-pie, we run into:
...
Breakpoint 2, 0x56555540 in bar ()^M
(gdb) PASS: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \
continue to breakpoint: foo \(1\)
next^M
Single stepping until exit from function bar,^M
which has no line number information.^M
0x56555587 in main ()^M
(gdb) FAIL: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \
next to foo (2)
...
The problem is that the bar breakpoint ends up at an unexpected location
because:
- the synthetic debug info is incomplete and doesn't provide line info
for the prologue part of the function, so consequently gdb uses the i386
port prologue skipper to get past the prologue
- the i386 port prologue skipper doesn't get past a get_pc_thunk call.
Work around this in the test-case by breaking on bar_label instead.
Tested on x86_64-linux with target boards unix, unix/-m32, unix/-fPIE/-pie and
unix/-m32/-fPIE/-pie.
|
|
|
|
|
|
I noticed that MSYMBOL_VALUE_CHAIN is unused, so this patch removes it.
|
|
For better packing on 64-bit hosts.
* section.c (struct bfd_section): Move next and prev field earlier.
Move alignment_power later.
(BFD_FAKE_SECTION): Adjust to suit.
* bfd-in2.h: Regenerate.
|
|
As the comment says, hppa doesn't support use of BFD_RELOC_* in
.reloc directives. Using xfail can result in a spurious XPASS result
as BFD_RELOC values change.
* testsuite/gas/elf/pr27228.d: Change xfail to notarget for hppa.
|
|
* readelf.c (is_32bit_abs_reloc, is_16bit_abs_reloc): Comment fixes.
(is_none_reloc): Correct nds32 reloc numbers.
|
|
|
|
And disable the new test gas/elf/size.s for alpha which uses its own
.set, for hppa*-*-hpux* which does not allow .size before declaration.
|
