aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-12Import readline 7.0 (patch 5)Tom Tromey96-1785/+9062
This imports readline 7.0 (up to patch 5) while preserving all gdb-local changes. This was done by checking out the readline git repository, making a branch based on the gdb baseline revision, applying the gdb changes to that branch, and then merging from readline 7. readline/ChangeLog.gdb 2019-08-12 Tom Tromey <tom@tromey.com> * Imported readline 7.0 patch 5.
2019-08-12Modify the ARM encoding and decoding of SQRSHRL and UQRSHLL MVE instructions.Srinath Parvathaneni8-12/+93
This is a change to the first published specifications [1][a] but since there is no hardware out there that uses the old instructions we do not want to support the old variant. This changes are done based on the latest published specifications [1][b]. [1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual [a] version bf [b] version bh gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64. (po_imm1_or_imm2_or_fail): Marco to check the immediate is either of 48 or 64. (parse_operands): Add case OP_I48_I64. (do_mve_scalar_shift1): Add function to encode the MVE shift instructions with 4 arguments. * testsuite/gas/arm/mve-shift-bad.l: Modify. * testsuite/gas/arm/mve-shift-bad.s: Likewise. * testsuite/gas/arm/mve-shift.d: Likewise. * testsuite/gas/arm/mve-shift.s: Likewise. opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for cases MVE_SQRSHRL and MVE_UQRSHLL. (print_insn_mve): Add case for specifier 'k' to check specific bit of the instruction.
2019-08-12Add generic and ARM specific support for half-precision IEEE 754 floating ↵Barnaby Wilks20-8/+324
point numbers to the assembler. Half precision floating point numbers will be encoded using the IEEE 754 half precision floating point format - 16 bits in total, 1 for sign, 5 for exponent and 10 bits of mantissa. This patch implements the float16 directive for both the IEEE 754 format and the Arm alternative format for the Arm backend. The syntax of the directive is: .float16 <0-n decimal numbers> e.g. .float16 12.0 .float16 0.23, 433.1, 0.06 The Arm alternative format is almost identical to the IEEE 754 format, except that it doesn't encode for NaNs or Infinity (instead an exponent of 0x1F represents a normalized number in the range 65536 to 131008). The alternative format is documented in the reference manual: https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439 Which format is used is controlled by the .float16_format <format> directive, where if <format> = ieee, then use the IEEE 754 half-precision format else if <format> = alternative, then use the Arm alternative format Or the format can be set on the command line via the -mfp16-format option that has a similar syntax. -mfp16-format=<ieee|alternative>. This also fixes the format and it cannot be changed by any directives. Once the format has been set (either by the command line option or a directive) it cannot be changed, and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the line being ignored. For ELF targets the appropriate EABI attribute will be written out at the end of assembling if the format has been explicitly specified. If no format has been explicitly specified then no EABI attributes will be written. If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008 format by default until the format is fixed or changed with the float16_format directive. gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings. (md_atof): Set precision for float16 type. (arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative format. (set_fp16_format): Parse a float16_format directive. (arm_parse_fp16_opt): Parse the fp16-format command line option. (aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute. * config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to arm_is_largest_exponent_ok. (arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function. * doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format= * testsuite/gas/arm/float16-bad.d: New test. * testsuite/gas/arm/float16-bad.l: New test. * testsuite/gas/arm/float16-bad.s: New test. * testsuite/gas/arm/float16-be.d: New test. * testsuite/gas/arm/float16-format-bad.d: New test. * testsuite/gas/arm/float16-format-bad.l: New test. * testsuite/gas/arm/float16-format-bad.s: New test. * testsuite/gas/arm/float16-format-opt-bad.d: New test. * testsuite/gas/arm/float16-format-opt-bad.l: New test. * testsuite/gas/arm/float16-le.d: New test. * testsuite/gas/arm/float16.s: New test. * testsuite/gas/arm/float16-eabi-alternative-format.d: New test. * testsuite/gas/arm/float16-eabi-ieee-format.d: New test. * testsuite/gas/arm/float16-eabi-no-format.d: New test. * testsuite/gas/arm/float16-eabi.s: New test. * config/atof-ieee.c (H_PRECISION): Macro for precision of float16 type. (atof_ieee): Set precision and exponent bits for encoding float16 types. (gen_to_words): NaN and Infinity encoding for float16. (ieee_md_atof): Set precision for encoding float16 type.
2019-08-12PR24851, gas/testsuite/gas/epiphany/badrelax.s failure with MALLOC_PERTURB_=1Alan Modra2-17/+28
PR 24851 * config/tc-epiphany.c (md_estimate_size_before_relax): Clear extra opcode bytes when changing from a 2-byte to a 4-byte insn.
2019-08-12Automatic date update in version.inGDB Administrator1-1/+1
2019-08-11Automatic date update in version.inGDB Administrator1-1/+1
2019-08-10Sort statement_enum and lang_statement_unionAlan Modra2-21/+26
To make comparing the two easier. * ldlang.h (enum statement_enum): Sort. (union lang_statement_union): Sort.
2019-08-10Delete unused ldlang.h structsAlan Modra2-12/+7
* ldlang.h (lang_common_statement_type): Delete. (lang_object_symbols_statement_type): Delete. (union lang_statement_union): Remove common_statement and object_symbols_statement.
2019-08-10stat_alloc castsAlan Modra4-28/+36
Casts from a void* just clutter the source. * ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop, exp_trinop), (exp_unop, exp_nameop, exp_assop, exp_assert): Remove casts of stat_alloc return value. * ldlang.c (new_statement, new_afile, sort_def_symbol), (lang_memory_region_lookup, lang_memory_region_alias), (ldlang_add_undef, ldlang_add_require_defined, insert_pad), (lang_add_gc_name, lang_new_phdr): Likewise. * lexsup.c (set_segment_start): Likewise.
2019-08-10lang_input_statement_type next pointersAlan Modra6-56/+67
"next" and "next_real_file" in lang_input_statement_type always point to another lang_input_statement_type, so it makes sense for these to not be the generic lang_statement_union_type. This patch also updates a number of variables in ldlang.c for the same reason, and modifies lang_statement_append to reduce the need for casts. * ldlang.h (lang_input_statement_type): Make next and next_real_file a lang_input_statement_type pointer. (lang_statement_append): Delete prototype. (LANG_FOR_EACH_INPUT_STATEMENT): Update for lang_input_statement_type change. * ldmain.c (add_archive_element): Likewise. * ldlang.c: Likewise throughout. (lang_statement_append): Make static. Make element and field void pointers. Remove casts in calls. (lang_check): Use a lang_input_statement_type pointer for "file". (find_rescan_insertion): Similarly for "iter" and return value. (lang_process): Similarly for "insert", "iter" and "temp". * emultempl/spuelf.em (embedded_spu_file): Likewise. * emultempl/aix.em (gld${EMULATION_NAME}_before_allocation): Expand lang_statment_append call.
2019-08-10Automatic date update in version.inGDB Administrator1-1/+1
2019-08-09Match Windows pathnames in gdb.linespec/break-ask.exp.Sandra Loosemore2-3/+8
2019-08-09 Sandra Loosemore <sandra@codesourcery.com> gdb/testsuite/ * gdb.linespec/break-ask.exp: Generalize regexps to match Windows pathnames too.
2019-08-09Fix access to uninitialized variable in fill_in_stop_funcPedro Franco de Carvalho2-0/+7
This patch changes find_pc_partial_function so that *block is set to nullptr when it fails, so that fill_in_stop_func won't access an uninitialized variable. gdb/ChangeLog: 2019-08-09 Pedro Franco de Carvalho <pedromfc@linux.ibm.com> * blockframe.c (find_pc_partial_function): Set *block to nullptr when the function fails.
2019-08-09s390: Implement 'type_align' gdbarch methodAndreas Arnez2-0/+38
The align.exp test case yields many FAILs on s390x, since GDB's _Alignoff doesn't always agree with the compiler's. On s390x, the maximum alignment is 8, but GDB returns an alignment of 16 for 16-byte data types such as "long double". This is fixed by implementing the type_align gdbarch method. The new method returns an alignment of 8 for all integer, floating-point, and vector types larger than 8 bytes. With this change, all align.exp tests pass. gdb/ChangeLog: * s390-tdep.c (s390_type_align): New function. (s390_gdbarch_init): Set it as type_align gdbarch method.
2019-08-09Synchronize libiberty sources with gcc mainline.Nick Clifton11-30/+301
* libiberty: Sync with gcc. Bring in: 2019-08-08 Martin Liska <mliska@suse.cz> PR bootstrap/91352 * lrealpath.c (is_valid_fd): New function. 2019-07-24 Martin Liska <mliska@suse.cz> PR lto/91228 * simple-object-elf.c (simple_object_elf_copy_lto_debug_sections): Find first '\0' starting from gnu_lto + 1. 2019-07-12 Ren Kimura <rkx1209dev@gmail.com> * simple-object-elf.c (simple_object_elf_match): Check zero value shstrndx. This fixes a Bug 90924. 2019-07-22 Martin Liska <mliska@suse.cz> * simple-object-elf.c (simple_object_elf_copy_lto_debug_sections): Do not search for gnu_lto_v1, but search for first '\0'. 2019-07-18 Eduard-Mihai Burtescu <eddyb@lyken.rs> * cplus-dem.c: Include rust-demangle.h. * rust-demangle.c: Include rust-demangle.h. * rust-demangle.h: New file. 2019-05-31 Michael Forney <mforney@mforney.org> * cp-demangle.c: Don't define CP_DYNAMIC_ARRAYS if __STDC_NO_VLA__ is non-zero. 2019-04-30 Ben L <bobsayshilol@live.co.uk> * d-demangle.c (dlang_parse_assocarray): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_tuple): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_structlit): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_arrayliteral): Correctly handle error result. * testsuite/d-demangle-expected: Add testcase. * d-demangle.c (dlang_parse_integer): Fix stack underflow. * testsuite/d-demangle-expected: Add testcase. * cp-demangle (d_print_comp_inner): Guard against a NULL 'typed_name'. * testsuite/demangle-expected: Add testcase. * cp-demangle.c (d_encoding): Guard against NULL return values from d_right (dc). * testsuite/demangle-expected: Add testcase. 2019-04-29 Ben L <bobsayshilol@live.co.uk> * cp-demangle.c (d_expression_1): Don't peek ahead unless the current char is valid. * testsuite/demangle-expected: Add testcase. 2019-04-10 Nick Clifton <nickc@redhat.com> PR 89394 * cp-demangle.c (cplus_demangle_fill_name): Reject negative lengths. (d_count_templates_scopes): Replace num_templates and num_scopes parameters with a struct d_print_info pointer parameter. Adjust body of the function accordingly. Add recursion counter and check that the recursion limit is not reached. (d_print_init): Pass dpi parameter to d_count_templates_scopes. Reset recursion counter afterwards, unless the recursion limit was reached.
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic24-48/+314
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-08-09doc: fix PAC typoAlan Hayward2-1/+5
gdb/doc/ChangeLog: * gdb.texinfo (AArch64 Pointer Authentication): Fix typo.
2019-08-09Arm: Skip tests on WINCE that require mapping symbolsTamar Christina5-0/+11
The following tests fail on wince as they rely on mapping symbols to give them a fixed order. This skips them on platforms that don't have mapping symbols. binutils/ChangeLog: * testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff. * testsuite/binutils-all/arm/in-order.d: Likewise. * testsuite/binutils-all/arm/out-of-order-all.d: Likewise. * testsuite/binutils-all/arm/out-of-order.d: Likewise.
2019-08-09x86-64: generalize SIMD test expectationsJan Beulich7-927/+212
In order to be able to add/remove insns to/from the middle of these tests, generalize the patterns for the symbol reference comments of RIP- relative operands.
2019-08-09[gdb] Fix gdb.dwarf2/varval.exp with -fPIE/-pieTom de Vries2-2/+14
With target board unix/-fPIE/-pie, we get: ... FAIL: gdb.dwarf2/varval.exp: print varval2 ... This is due comparing a get_frame_pc result (which includes the for PIE non-zero relocation offset) with pc_high and pc_low obtained using get_scope_pc_bounds (which do not include the relocation offset). Fix this by adjusting pc_high and pc_low with the relocation offset. Tested on x86_64-linux with target board unix/-fPIE/-pie. gdb/ChangeLog: 2019-08-09 Tom de Vries <tdevries@suse.de> PR gdb/24591 * dwarf2read.c (dwarf2_fetch_die_loc_sect_off): Adjust pc_high and pc_low with relocation offset.
2019-08-09Automatic date update in version.inGDB Administrator1-1/+1
2019-08-08[gdb/testsuite] Fix gdb.tui/basic.exp with check-read1Tom de Vries2-1/+6
With gdb.tui/basic.exp and check-read1, we run into (using -v for verbose log): ... ^[[0+++ _csi_0 <<<>>> ERROR: (DejaGnu) proc "_csi_0" does not exist. ... In contrast, without check-read1, we have: ... ^[[0;10m<SNIP>+++ _csi_m <<<0;10>>> ... The problem is that this regexp in _accept: ... -re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" { ... while matching the longer sequence '^[' '[' '0' ';' '1' '0' 'm', also matches the shorter sequence '^[' '[' '0'. The regexp attempts to match a CSI (Control Sequence Introducer) sequence, and the final byte of such a sequence cannot be a digit. Fix the regexp accordingly: ... - -re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" { + -re "^\x1b\\\[(\[0-9;\]*)(\[a-zA-Z@\])" { ... Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2019-08-08 Tom de Vries <tdevries@suse.de> PR testsuite/24862 * lib/tuiterm.exp (_accept): Fix CSI regexp.
2019-08-08Change the output of readelf's note display so that the "Data size" column ↵Nick Clifton156-153/+321
header is left justified. PR 24887 binutils* readelf.c (process_notes_at): Left justify the "Data size" column heading. * testsuite/binutils-all/i386/empty.d: Adjust for new output format. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/note-2-32.d: Likewise. * testsuite/binutils-all/note-2-64.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. ld * testsuite/ld-aarch64/bti-plt-2.d: Adjust for new output format from readelf. * testsuite/ld-aarch64/bti-plt-4.d: Likewise. * testsuite/ld-aarch64/bti-plt-6.d: Likewise. * testsuite/ld-aarch64/bti-plt-7.d: Likewise. * testsuite/ld-aarch64/bti-warn.d: Likewise. * testsuite/ld-aarch64/property-bti-pac1.d: Likewise. * testsuite/ld-aarch64/property-bti-pac2.d: Likewise. * testsuite/ld-aarch64/property-bti-pac3.d: Likewise. * testsuite/ld-elf/x86-feature-1a.rd: Likewise. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372a.d: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486a.d: Likewise. * testsuite/ld-i386/pr23486b.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/pr23372a-x32.d: Likewise. * testsuite/ld-x86-64/pr23372a.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486a-x32.d: Likewise. * testsuite/ld-x86-64/pr23486a.d: Likewise. * testsuite/ld-x86-64/pr23486b-x32.d: Likewise. * testsuite/ld-x86-64/pr23486b.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1.r: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-6.r: Likewise. * testsuite/ld-x86-64/property-7.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. gas * testsuite/gas/i386/property-1.d: Adjust for new output format from readelf. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-08-08Update the handling of shift rotate and load/store multiple instructions in ↵Yoshinori Sato3-52/+61
the H8300 assembler. incldue * opcode/h8300.h (EXPAND_UNOP_EXTENDED_B): Add MODEL. (EXPAND_UNOP_EXTENDED_W): Likewise. (EXPAND_UNOP_EXTENDED_L): Likewise. (struct h8_opcode h8_opcodes): Likewise. (struct h8_opcode h8_opcodes): tas / ldm / stm supported H8S or later.
2019-08-08Move the h8300 assembler's MOVFPE and MOVTPE tests to the correct location.Yoshinori Sato5-50/+56
* gas/testsuite/gas/h8300/h8300.exp: Fix movfpe and movtpe tests. * gas/testsuite/gas/h8300/misc.s: Likewise. * gas/testsuite/gas/h8300/misch.s: Likewise. * gas/testsuite/gas/h8300/miscs.s: Likewise.
2019-08-08Fix problem building PE DLL test generator with compilers that do not ↵Nick Clifton2-1/+7
support c99/c11. * testsuite/gentestdlls.c (main): Move declaration of loop variable outside of the for() statement.
2019-08-08readelf: mask unknown description data bytes.Jordan Rupprecht via binutils2-1/+5
When printing unknown note types, readelf prints the raw description section byte-by-byte. However, it does not mask appropriately, e.g. it prints the byte 'ba' as 'ffffffba'. * readelf.c (process_note): Mask unknown description data bytes.
2019-08-08Automatic date update in version.inGDB Administrator1-1/+1
2019-08-07Prevent objdump from aborting when asked to disassemble an unknown type of ↵Phillipe Antoine2-6/+19
ARC binary file. PR 24854 * arc-dis.c (arc_insn_length): Return 0 rather than aborting when encountering an unknown machine type. (print_insn_arc): Handle arc_insn_length returning 0. In error cases return -1 rather than calling abort.
2019-08-08Integer overflows in readelf get_dataAlan Modra2-8/+10
I noticed the test for overflow of amt = size * nmemb in get_data wasn't effective. An obvious example of nmemb = 3 and size = half max value overflows but doesn't result in amt < nmemb. This patch fixes this problem and reports a size truncation or overflow rather than out of memory in more cases. * readelf.c (get_data): Improve overflow checks.
2019-08-07Improve the formatting of the title strings of the binutils manual pages.Nick Clifton2-18/+25
PR 24777 * doc/binutils.texi: Ensure consistent formating of title strings for man pages. Extend the title of the size man page to be more informative.
2019-08-07Make struct frame_arg self-managingTom Tromey5-25/+22
This changes struct frame_arg to be self-managing and then fixes the various users. Tested by the buildbot. gdb/ChangeLog 2019-08-07 Tom Tromey <tromey@adacore.com> * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (print_frame_args): Update. * python/py-framefilter.c (py_print_single_arg, enumerate_args): Update. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * frame.h (struct frame_arg): Add initializers. <error>: Now a unique_xmalloc_ptr.
2019-08-07AArch64 pauth: Indicate unmasked addresses in backtraceAlan Hayward9-11/+82
Armv8.3-a Pointer Authentication causes the function return address to be obfuscated on entry to some functions. GDB must unmask the link register in order to produce a backtrace. The following patch adds markers of [PAC] to the bracktrace, to indicate which addresses needed unmasking. This includes the backtrace when using MI. For example, consider the following backtrace: (gdb) bt 0 0x0000000000400490 in puts@plt () 1 0x00000000004005dc in foo ("hello") at cbreak-lib.c:6 2 0x0000000000400604 [PAC] in bar () at cbreak-lib.c:12 3 0x0000000000400620 [PAC] in main2 () at cbreak.c:17 4 0x00000000004005b4 in main () at cbreak-3.c:10 The functions in cbreak-lib use pointer auth, which masks the return address to the previous function, causing the addresses of bar (in the library) and main2 (in the main binary) to require unmasking in order to unwind the backtrace. An extra bool is added alongside the prev_pc in the frame structure. At the point at which the link register is unmasked, the AArch64 port calls into frame to sets the bool. This is the most efficient way of doing it. The marker is also added to the python frame printer, which is always printed if set. The marker is not explicitly exposed to the python code. I expect this will potentially cause issues with some tests in the testsuite when Armv8.3 pointer authentication is used. This should be fixed up in the the future once real hardware is available for full testsuite testing. gdb/ChangeLog: * NEWS: Expand the Pointer Authentication entry. * aarch64-tdep.c (aarch64_frame_unmask_address): Rename from this. (aarch64_frame_unmask_lr): ... to this. (aarch64_prologue_prev_register, aarch64_dwarf2_prev_register): Call aarch64_frame_unmask_lr. * frame.c (struct frame_info): Add "masked" variable. (frame_set_previous_pc_masked) (frame_get_pc_masked): New functions. (fprint_frame): Check for masked pc. * frame.h (frame_set_previous_pc_masked) (frame_get_pc_masked): New declarations. * python/py-framefilter.c (py_print_frame): Check for masked pc. * stack.c (print_frame): Check for masked pc. gdb/doc/ChangeLog: * gdb.texinfo (AArch64 Pointer Authentication): New subsection.
2019-08-07ld: use a specific linker script in BPF targetsJose E. Marchesi7-6/+732
This patch makes the elf64bpf emulation to use it's own linker script, based on elf.sc. At the moment, the only change is that the BPF executable doesn't define an entry symbol (BPF programs feature several entry points scattered in several sections.) This is a step towards the goal of generating proper ELF executables that would be loaded by the kernel's libbpf. We are not there yet: BPF "programs" should still be linked with -r. This change removes a warning while linking executables, decreases the number of unsupported tests in the target from 47 to 29, and increases the number of expected passes from 104 to 145. Regtested in x86_64 for all targets. No regressions. ld/ChangeLog: 2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com> * scripttempl/elf64bpf.sc: Adapted from elf.sc. * emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf. (EMBEDDED): Define. * testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an undefined entry symbol. * testsuite/ld-bpf/jump-1.d: Likewise. * testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to ld in BPF targets, and do not expect line number information. * testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests in BPF targets.
2019-08-07bfd: use the ELF linker to perform relocations in BPF targetsJose E. Marchesi2-95/+193
This patch changes the eBPF linker to provide a relocate_section function instead of relying on using special functions in relocation howtos. Tested in x86_64 host. No regressions. bfd/ChangeLog: 2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com> * elf64-bpf.c (bpf_elf_relocate_section): New function. (bpf_elf_insn_disp_reloc): Delete function. (elf_backend_relocate_section): Define.
2019-08-07PR24644, OOM-Bug in _bfd_archive_64_bit_slurp_armapAlan Modra2-1/+14
PR 24644 * archive64.c (_bfd_archive_64_bit_slurp_armap): Properly check for overflow in expressions involving nsymz.
2019-08-07Fix the binutils test for .NET assembly support so that it distinguishing ↵Omair Majid3-47/+110
between targets which do not support the x86 PE format at all, and those that do support it, but which do not recognise the .NET assembly variants. * testsuite/binutils-all/objdump.exp (test_objdump_dotnet_assemblies): Fix test to distinguish errors in parsing simple pei-i386 and pei-x86-64 vs parsing the newly introduced machine types. * testsuite/gentestdlls.c (write_simple_dll): New function. (main): Generate simple and Linux-specific variants of pei-i386 and pei-x86-64 files so both can be used by tests.
2019-08-07x86: drop stray FloatMFJan Beulich3-14/+21
The flag is supposed to be used in templates which allow for both a "short" and a "long" format memory operand. Drop it from templates not matching this pattern. In the control/status word cases it was (ab)used in place of the intended IgnoreSize.
2019-08-07PR24876, readelf: heap-buffer-overflow in dump_ia64_unwindAlan Modra2-1/+8
PR 24876 * readelf.c (dump_ia64_unwind): Check that buffer is large enough for "stamp" before reading.
2019-08-06Introduce obstack_strndupTom Tromey8-23/+43
This introduces obstack_strndup and changes gdb to use it. Note that obstack_strndup works like savestring, and not exactly like xstrndup. The difference is that obstack_strndup uses the passed-in length, while xstrndup uses strnlen to choose the length. gdb/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * stabsread.c (patch_block_stabs, read_one_struct_field) (read_enum_type): Use obstack_strndup. * rust-exp.y (rust_parser::copy_name): Use obstack_strndup. * gdb_obstack.h (obstack_strndup): Use obstack_strndup. * dwarf2read.c (guess_full_die_structure_name) (anonymous_struct_prefix): Use obstack_strndup. * dbxread.c (cp_set_block_scope): Use obstack_strndup. * c-exp.y (yylex): Use obstack_strndup. * ada-exp.y (write_object_renaming, write_ambiguous_var) (write_var_or_type): Use obstack_strndup.
2019-08-06Add obstack_strdup overload taking a std::stringTom Tromey7-36/+38
This adds an obstack_strdup overload that takes a std::string, and changes a few spots in gdb to use it. gdb/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * symfile.c (reread_symbols): Use obstack_strdup. * stabsread.c (read_type): Use obstack_strdup. * gdb_obstack.h (obstack_strdup): New overload. * dwarf2read.c (dwarf2_compute_name, create_dwo_unit_in_dwp_v1) (create_dwo_unit_in_dwp_v2, build_error_marker_type) (dwarf2_canonicalize_name): Use obstack_strdup. * dbxread.c (read_dbx_symtab): Use obstack_strdup. * cp-support.c (inspect_type, replace_typedefs_qualified_name): Use obstack_strdup.
2019-08-06Make obstack_strdup inlineTom Tromey3-11/+10
This changes obstack_strdup to be an inline function. This seems better to me, considering how small it is; but also it follows what the code did before the previous patch. gdb/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * gdb_obstack.h (obstack_strdup): Define. * gdb_obstack.c (obstack_strdup): Don't define.
2019-08-06Use obstack_strdup moreTom Tromey14-72/+57
This changes gdb to use obstack_strdup when appropriate, rather than the wordier obstack_copy0. gdb/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * xcoffread.c (SYMNAME_ALLOC, process_xcoff_symbol): Use obstack_strdup. * typeprint.c (typedef_hash_table::find_global_typedef): Use obstack_strdup. * symfile.c (allocate_compunit_symtab): Use obstack_strdup. * stabsread.c (common_block_start): Use obstack_strdup. * objfiles.c (set_objfile_main_name, objfile): Use obstack_strdup. * namespace.c (add_using_directive): Use obstack_strdup. * mdebugread.c (parse_symbol, parse_type): Use obstack_strdup. * jit.c (finalize_symtab): Use obstack_strdup. * dwarf2read.c (fixup_go_packaging, dwarf2_physname) (guess_partial_die_structure_name, partial_die_info::fixup) (dwarf2_name): Use obstack_strdup. * coffread.c (coff_read_struct_type, coff_read_enum_type): Use obstack_strdup. * c-exp.y (scan_macro_expansion): Use obstack_strdup. * buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use obstack_strdup. * ada-lang.c (ada_decode_symbol): Use obstack_strdup.
2019-08-07Automatic date update in version.inGDB Administrator1-1/+1
2019-08-07Add a selftest that checks documentation invariants.Philippe Waroquiers3-0/+113
Several approaches were discussed (mail or irc) to verify the invariants of the GDB help documentation : checking with apropos ., modifying add_cmd to do the check and output a warning, implement maintenance check-doc. A selftest was finally chosen as: * this can be run on demand, including by users if they want to check user defined commands. * it does not interact with the normal behaviour of apropos, define, python, ... (such as output warnings when a user defines a command help that does not respect the doc). * when the selftest runs, it checks the user defined and python defined commands currently defined. gdb/ChangeLog * unittests/help-doc-selftests.c: New file. * Makefile.in: Add the new file.
2019-08-07Make first and last lines of 'command help documentation' consistent.Philippe Waroquiers53-265/+400
With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-08-06[PR build/24886] disable glibc mcheck supportFrank Ch. Eigler13-290/+63
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it.
2019-08-06Add more styling to "disassemble"Tom Tromey12-37/+94
This adds more styling to the disassemble command. In particular, addresses and function names in the disassembly are now styled. This required fixing a small latent bug in set_output_style. This function always passed NULL to emit_style_escape; but when writing to a file other than gdb_stdout, it should emit the style escape directly. (FWIW this is another argument for better integrating the pager with ui_file and getting rid of this entire layer.) gdb/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * utils.c (set_output_style): Sometimes pass stream to emit_style_escape. * ui-out.h (class ui_out) <can_emit_style_escape>: Declare. * record-btrace.c (btrace_insn_history): Update. * mi/mi-out.h (class mi_ui_out) <can_emit_style_escape>: New method. * disasm.h (gdb_pretty_print_disassembler): Add uiout parameter. Update initializers. <m_uiout>: New field. <m_di>: Move lower. * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Remove "uiout" parameter. (dump_insns): Update. * cli-out.h (class cli_ui_out) <can_emit_style_escape>: Declare. * cli-out.c (cli_ui_out::can_emit_style_escape): New method. gdb/testsuite/ChangeLog 2019-08-06 Tom Tromey <tom@tromey.com> * gdb.base/style.exp: Add disassemble test. * gdb.base/style.c (some_called_function): New function. (main): Use it.
2019-08-06Replace int with enum block_enum where appropriate.Christian Biesinger2-6/+17
For better readability and type safety. gdb/ChangeLog: 2019-08-06 Christian Biesinger <cbiesinger@google.com> * symtab.c (symbol_cache_lookup): Change int to enum block_enum. (error_in_psymtab_expansion): Likewise. (lookup_symbol_via_quick_fns): Likewise. (basic_lookup_transparent_type_quick): Likewise. (basic_lookup_transparent_type_1): Likewise.
2019-08-06Clean up source file error reportingTom Tromey2-14/+18
print_source_lines_base reopens the source file every time that a source line is to be printed. However, there's no need to do this so frequently -- it's enough to do it when switching source files, and otherwise rely on the cache. The code seems to try to avoid these multiple opens; at a guess I'd say something just got confused along the way. This patch fixes the problem by reorganizing the code both to make it more clear, and to ensure that reopens only occur when the "last source visited" changes. gdb/ChangeLog 2019-08-06 Tom Tromey <tromey@adacore.com> * source.c (last_source_error): Now bool. (print_source_lines_base): Make "noprint" bool. Only open source file when last_source_visited changes.
generated by cgit v1.1 at 2024-11-29 00:24:01 +0000