| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rename mn10300_sim.h to mn10300-sim.h to match other ports, and move most
of the arch-specific content out of sim-main.h to it. This isn't a big
win though as we still have to include the header in sim-main.h due to the
igen interface: it hardcodes including sim-main.h in its files. So until
we can fix that, we have to keep bleeding these settings into the common
codes.
Also take the opportunity to purge a lot of unused headers from these.
The local modules should already include the right headers, so there's
no need to force everyone to pull them in. A lot of this is a hold over
from the pre-igen days of this port.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
We can also move the machs.h include out since the model logic was all
generalized from compile-time to runtime last year.
|
|
Rename v850_sim.h to v850-sim.h to match other ports, and move most
of the arch-specific content out of sim-main.h to it. This isn't a
big win though as we still have to include the header in sim-main.h
due to the igen interface: it hardcodes including sim-main.h in its
files. So until we can fix that, we have to keep bleeding these
settings into the common codes.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so drop the msp430-sim.h include and move it to
the few files that actually need it.
While we're here, drop redundant includes from sim-main.h:
* sim-config.h & sim-types.h included by sim-basics.h already
* sim-engine.h included by sim-base.h already
And move sim-options.h to the one file that needs it.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so drop the ft32-sim.h include and move it to
the few files that actually need it.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so drop the d10v_sim.h include and move it to
the few files that actually need it.
Also rename the file to standardize it a bit better with other ports.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so drop the cr16_sim.h include and move it to
the few files that actually need it.
Also rename the file to standardize it a bit better with other ports.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
The BIT override would be better in the place where it's redefined, so
move it to armdefs.h instead.
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
While we're here, drop redundant includes from sim-main.h:
* sim-types.h is included by sim-base.h already
* sim-base.h is included twice
* sim-io.h is included by sim-base.h already
|
|
There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.
|
|
PR 29936
* dwarf2.c (concat_filename): Fix check for a directory index off
the end of the directory table.
|
|
This allows to build GDB even though the default value of
_WIN32_WINNT is lower than the one needed to expose some
new APIs used here, and leave the test for their actual
support to run time.
* gdb/nat/windows-nat.c (EXTENDED_STARTUPINFO_PRESENT): Define if
not defined.
(create_process_wrapper): Use 'gdb_lpproc_thread_attribute_list'
instead of 'PPROC_THREAD_ATTRIBUTE_LIST' (which might not be defined
at compile time). This fixes compilation error using mingw.org's
MinGW.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c.
This reduces the size of ld and is necessary with the following
patches that call a COFF-only bfd function from ld/pdb.c. Without it
we'd break every non-COFF target build.
|
|
The xxx-desc.h header file already includes this, and it's how the
other cgen ports are getting it, so drop it from these two.
|
|
The common sim headers should define these for us already, so there's
no need for the ppc header to set them up.
|
|
Move this out of the global sim-main.h and to the few files that
actually use functions from it. Only the cgen ports were pulling
this, so this makes cgen & non-cgen behave more the same.
|
|
The cgen-types.h header sets up types that are needed by cgen-defs.h,
so move the include out of sim-main.h and to that header. It might
be needed in other specific modules, but for now let's kick it out of
sim-main.h to make some progress. Things still build with just this.
|
|
This reverts commit 681a422b855e4b20086554b170dae051361f00c7.
I missed that this was included via common/sim-inline.c. I thought
I had grepped the top of the tree, but I must have only done mn10300.
Add a comment to make it clear where/how this file is used.
|
|
Nothing compiles or references this, so punt it.
|
|
The bfd APIs are used only by sim-n-endian.h which is only included by
sim-endian.c, so move the bfd.h include there and out of sim-endian.h
which is included by many other modules.
|
|
Not all arches include this in sim-main.h, and the ones that do don't
actually use bfd defines in the sim-main.h header. Prune it to make
sim-main.h simpler so we can kill it off entirely in the future.
We add the include to the files that utilize e.g. bfd_vma though.
|
|
This is a 32-bit architecture with 32-bit registers, so replace the
custom "word" long int typedef with an explicit int32_t. This is
a correctness fix since long will be 64-bits on most 64-bit hosts.
|
|
This is a 32-bit architecture with 32-bit registers, so replace the
custom "word" int typedef with an explicit int32_t. Practically
speaking, this produces the same code, but it should hopefully make
it easier to merge common code in the future.
|
|
Nothing actually uses these, so punt them. Some of the ports are
using local "word" types, but we'll clean those up in a follow up.
|
|
These variables are setting the same value as the defaults. Trim
this redundant logic to make it easier to see the real differences
so we can try to keep unifying cases.
|
|
Change the default (unhandled) mips64* targets to use the existing
mips64 multi-run build. It already handles the formats, we just
have to list the mips8000 bfd for it.
|
|
The existing mips64vr-* multi-run build already handles mips5000
targets, so reuse that for mips64vr5* targets too. This moves
more logic from build-time to runtime so we can have a single
binary that supports many targets.
|
|
* riscv-toolchain-conventions,
PR, https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/14
Issue, https://github.com/riscv-non-isa/riscv-toolchain-conventions/issues/11
* Refer to the commit afc41ffb,
RISC-V: Reorder the prefixed extensions which are out of order.
In the past we only allow to reorder the prefixed extensions. But according
to the PR 14 in the riscv-toolchain-convention, we can also relax the order
checking to allow the whole extensions be written out of orders, including
the single standard extensions and the prefixed multi-letter extensions.
Just that we still need to follow the following rules as usual,
1. prefixed extensions need to be seperated with `_'.
2. prefixed extensions need complete <major>.<minor> version if set.
Please see the details in the march-ok-reorder gas testcase.
Passed the riscv-gnu-toolchain regressions.
bfd/
* elfxx-riscv.c (enum riscv_prefix_ext_class): Changed RV_ISA_CLASS_UNKNOWN
to RV_ISA_CLASS_SINGLE, since everything that does not belong to the
multi-keyword will possible be a single extension for the current parser.
(parse_config): Likewise.
(riscv_get_prefix_class): Likewise.
(riscv_compare_subsets): Likewise.
(riscv_parse_std_ext): Removed, and merged with riscv_parse_prefixed_ext
into riscv_parse_extensions.
(riscv_parse_prefixed_ext): Likewise.
(riscv_parse_subset): Only need to call riscv_parse_extensions to parse
both single standard and prefixed extensions.
gas/
* testsuite/gas/riscv/march-fail-order-std.d: Removed since the relaxed
order checking.
* testsuite/gas/riscv/march-fail-order-std.l: Likewise.
* testsuite/gas/riscv/march-fail-order-x-std.d: Likewise.
* testsuite/gas/riscv/march-fail-order-z-std.d: Likewise.
* testsuite/gas/riscv/march-fail-order-zx-std.l: Likewise.
* testsuite/gas/riscv/march-fail-unknown-std.l: Updated.
* testsuite/gas/riscv/march-ok-reorder.d: New testcase.
|
|
Now that sim APIs either use 64-bit addresses all the time, or more
appropriate target-specific types, drop this now-unused 32-bit-only
address type.
Bug: https://sourceware.org/PR7504
|
|
The latter type matches the address size configured for this sim.
Also take the opportunity to simplify printf logic by leveraging
PRI* macros.
|
|
The latter type matches the address size configured for this sim.
|
|
We've been using SIM_ADDR which has always been 32-bit. This means
the upper 32-bit address range in 64-bit sims is inaccessible. Use
64-bit addresses all the time since we want the APIs to be stable
regardless of the active arch backend (which can be 32 or 64-bit).
The length is also 64-bit because it's completely feasible to have
a program that is larger than 4 GiB in size/image/runtime. Forcing
the caller to manually chunk those accesses up into 4 GiB at a time
doesn't seem useful to anyone.
Bug: https://sourceware.org/PR7504
|
|
Since SIM_ADDR is always 32-bit, it might truncate the address with
64-bit ELFs. Since we load that addr from the bfd, use the bfd_vma
type which matches the bfd_get_start_address API.
|
|
|
|
1) The first write in write_build_id wrote rubbish past the struct
external_IMAGE_DEBUG_DIRECTORY, which was later overwritten with
correct data. No user visible problem there, except that tools like
valgrind complain.
2) The size for the pdb name was incorrectly calculated.
* emultempl/pe.em (write_build_id): Write the debug directory,
not the entire section contents.
(setup_build_id): Add size for the base name of pdb_name, not
the full path.
* emultempl/pep.em: Likewise.
* testsuite/ld-pe/pdb2-section-contrib.d: Update.
|
|
The existing mips64vr-* multi-run build already handles mips4300
targets, so reuse that for mips64vr43* targets too. This moves
more logic from build-time to runtime so we can have a single
binary that supports many targets.
|
|
|
