Age | Commit message (Collapse) | Author | Files | Lines |
|
mips16_skip_prologue. Now return the address of the first
instruction past the function prologue.
(mips16_skip_prologue): Remove, no longer necessary.
(mips_skip_prologue): Replace call to mips16_skip_prologue
by call to mips16_scan_prologue.
|
|
* ld-crx/reloc-num16.d: Likewise.
* ld-crx/reloc-num32.d: Likewise.
* ld-scripts/provide-2.t: Start .data at 0x2000.
* ld-scripts/provide-2.d: Adjust.
|
|
|
|
|
|
parameter. If called after _bfd_elf_write_section_eh_frame,
don't allow a -2 return unless need_* bit is already set, and
handle offsets adjusted for output_offset.
* elf-bfd.h (_bfd_elf_eh_frame_section_offset): Update prototype.
* elf.c (_bfd_elf_section_offset): Update call.
|
|
Remove comments about placement of literal pools.
(Literal Directive): Update description of literal placement.
(Literal Prefix Directive): Remove statement that this does not apply
to absolute-mode literals. Describe new section naming scheme.
|
|
mips32_skip_prologue. Now return the address of the first
instruction past the function prologue.
(mips32_skip_prologue): Remove. No longer necessary.
(mips16_skip_prologue): Add parameter end_pc instead of
computing it.
(mips_skip_prologue): Compute the upper limit for the
prologue scanning. Update call to mips16_skip_prologue.
Replace call to mips32_skip_prologue by call to
mips32_scan_prologue.
|
|
NetBSD system call stubs that store %rp in the ERP slot of the
stack frame.
|
|
|
|
* gdb.mi/gdb701.c (main): Return 0.
|
|
PR 445
* emulparams/elf64_ia64.sh (SMALL_DATA_CTOR): Set.
(SMALL_DATA_DTOR): Set.
* emulparams/elf64_ia64_fbsd.sh (SMALL_DATA_CTOR): Unset.
(SMALL_DATA_DTOR): Unset.
* scripttempl/elf.sc: If SMALL_DATA_CTOR is set, move .ctors
after .data. If SMALL_DATA_DTOR is set, move .dtors after
.data.
|
|
* ld-scripts/sort.exp: Run for ELF targets only.
|
|
|
|
(openp): Unconditionally use O_BINARY.
|
|
PR 63
* ldlang.h (lang_output_section_statement_type): Make "next" a
struct lang_output_section_statement_struct *.
(struct orphan_save): Move from elf32.em. Add "name" and "flags".
(lang_output_section_find_by_flags, lang_insert_orphan): Declare.
* ldlang.c (lang_output_section_find_1): Adjust for changed
output_section_statement "next".
(strip_excluded_output_sections): Likewise.
(lang_record_phdrs): Likewise.
(lang_output_section_find_by_flags): New function.
(output_prev_sec_find): Move from pe.em. Adjust iterator.
(lang_insert_orphan): New function. Tail end of elf32.em's
place_orphan merged with that from pe.em. Allow bfd_section to
be placed first. New heuristic for placing new output section
statement in existing script, and accompanying split of __start
symbol alignment into a separate assignment to dot.
(lang_add_section): Consistently use output->bfd_section rather than
an alias, section->output_section.
(map_input_to_output_sections): Rename overly long arg. Move
initialization of data_statement output section to here..
(lang_check_section_addresses): ..from here.
(print_assignment): Correct printing of etree_assert.
(print_all_symbols): Don't bomb if userdata is NULL.
(IGNORE_SECTION): Rearrange.
* emultempl/elf32.em (output_rel_find): Adjust interator.
(output_prev_sec_find): Delete.
(struct orphan_save): Delete.
(gld${EMULATION_NAME}_place_orphan): Cater for zero bfd_section
flags without creating a duplicate output section statement.
Revise code holding history of various orphan section placements.
Allow orphan sections to place before script specified output
sections. Call lang_output_section_find_by_flags when placement
by name fails. Use lang_insert_orphan.
* emultempl/mmo.em (output_prev_sec_find): Delete.
(struct orphan_save): Delete.
(mmo_place_orphan): Revise code holding history of orphan placement.
Allow orphans to place before existing output sections. Use
lang_insert_orphan.
* emultempl/pe.em (output_prev_sec_find): Delete.
(struct orphan_save): Delete.
(gld_${EMULATION_NAME}_place_orphan): Revise to suit use of
lang_insert_orphan.
ld/testsuite/
* ld-scripts/overlay-size.d: Update for changed orphan section
placement.
* ld-mmix/bpo-18.d: Likewise.
|
|
* event-top.c (gdb_readline2): Likewise.
|
|
* cris-tdep.c (_initialize_cris_tdep): Re-add call to
deprecated_add_core_fns which was removed by mistake.
|
|
|
|
|
|
|
|
references to deprecated_registers[] with equivalent code.
|
|
|
|
PR 440
* coffcode.h (coff_compute_section_file_positions): Cast to
bfd_vma when computing page alignment.
|
|
offsets, not VMAs, for DT_VERSYM, DT_VERDEF, DT_VERNEED.
* scripttempl/armbpabi.sc: Do not put .gnu.version.* into a
loadable segment.
|
|
``deprecated_registers'' with equivalent code. Use gdb_assert()
instead of explicit test and print statement.
|
|
(file_stat): Define.
(strings_object_file): Avoid using get_file_size, instead do the
checks here, using file_stat.
* configure.in (HAVE_STAT64): New test.
* configure: Rebuilt.
* config.in: Rebuilt.
|
|
relocations use a virtual address, not a section offset.
|
|
* ldcref.c (check_section_sym_xref): Delete.
(check_local_sym_xref): New function.
(check_nocrossrefs): Adjust call.
|
|
|
|
|
|
* emultempl/pe.em (struct orphan_save): Add os_tail.
(place_orphan): Backport assorted fixes from elf32.em.
|
|
2004-10-12 Kelley Cook <kcook@gcc.gnu.org>
* configure.in (*-*-cygwin*): Supress warning if newlib not present.
* configure: Regenerate.
|
|
* elf32-xtensa.c (elf_xtensa_get_private_bfd_flags): Delete.
(narrow_instruction, widen_instruction): Remove unnecessary calls to
xtensa_format_encode.
(ebb_propose_action): Inline call to ebb_add_proposed_action.
(ebb_add_proposed_action): Delete.
gas ChangeLog
* config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
(is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
is_windowed_return_opcode): Delete.
(xtensa_frob_label): Use get_subseg_target_freq.
(md_assemble): Inline call to is_entry_opcode.
(xtensa_handle_align): Inline call to get_frag_is_literal.
(relaxation_requirements): Inline call to is_jx_opcode.
(emit_single_op): Inline call to is_movi_opcode.
(xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
get_frag_is_no_transform, is_entry_opcode, and
set_frag_is_specific_opcode. Use get_subseg_total_freq.
(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
Inline calls to get_frag_is_no_transform.
(next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
(xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
get_frag_is_no_transform.
(convert_frag_immed_finish_loop): Inline calls to get_expression_value
and set_frag_is_no_transform.
(get_expression_value): Delete.
(subseg_map struct): Rename cur_total_freq to total_freq. Rename
cur_target_freq to target_freq.
(get_subseg_info): Split out code to create a new map entry into ...
(add_subseg_info): ... this new function.
(get_last_insn_flags): Check if get_subseg_info succeeded.
(set_last_insn_flags): Call add_subseg_info if needed.
(get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
(xtensa_reorder_segments): Compute last_sec while counting sections.
Remove call to get_last_sec.
(get_last_sec): Delete.
(cache_literal_section): Inline call to retrieve_literal_seg and its
callees, seg_present and add_seg_list.
(retrieve_literal_seg, seg_present, add_seg_list): Delete.
(get_frag_is_insn, get_frag_is_no_transform,
set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
* config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.
|
|
* gdb.threads/schedlock.c: Add comment markers to use to find
line numbers.
* gdb.threads/schedlock.exp: Adjust regex to handle the new
comments.
* gdb.threads/watchthreads.exp: Use gdb_get_line_number to find
breakpoint lines.
|
|
(sparc_target): New function.
* sparc-nat.h: Update copyright year.
(sparc_target): New prototype.
* sparcnbsd-nat.c: Don't include "gdbcore.h", include "target.h".
(_initialize_sparcnbsd_nat): Construct and add target vector.
* sparc64nbsd-nat.c: Include "target.h".
(_initialize_sparc64nbsd_nat): Construct and add target vector.
* Makefile.in (sparc-nat.o, sparcnbsd-nat.o, sparc64nbsd-nat.o):
Update dependencies.
* config/sparc/nbsd64.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o, add inf-ptrace.o.
* config/sparc/nbsdaout.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o, add inf-ptrace.o and bsd-kvm.o.
(NAT_FILE): Set to nm-bsd.h.
(LOADLIBES): New variable.
* config/sparc/nbsdelf.mh (NATDEPFILES): Remove infptrace.o and
infarg.o, add inf-ptrace.o.
* config/sparc/nm-nbsdaout.h: Remove file.
* config/sparc/fbsd.mh (NATDEPFILES): Add inf-ptrace.o.
* config/sparc/linux.mh (NATDEPFILES): Add inf-ptrace.o.
* config/sparc/linux64.mh (NATDEPFILES): Add inf-ptrace.o.
|
|
* gdbint.texinfo (Versions and Branches): New chapter.
(Releasing GDB): Delete "Versions and Branches" section.
(Top): Add "Versions and Branches".
|
|
* elf32-xtensa.c: Use ISO C90 formatting.
gas ChangeLog
* config/tc-xtensa.c: Use ISO C90 formatting.
* config/tc-xtensa.h: Likewise.
* config/xtensa-istack.h: Likewise.
* config/xtensa-relax.c: Likewise.
* config/xtensa-relax.h: Likewise.
ld ChangeLog
* emultempl/xtensaelf.em: Use ISO C90 formatting.
opcodes ChangeLog
* xtensa-dis.c: Use ISO C90 formatting.
|
|
|
|
message.
|
|
* configure: Regenerated.
* Makefile.in: Add gdb.dwarf2.
* gdb.dwarf2/Makefile.in, gdb.dwarf2/dw2-basic.S,
gdb.dwarf2/dw2-basic.exp, gdb.dwarf2/main.c,
gdb.dwarf2/file1.txt: New files.
|
|
bfd/
* elf32-arm.h: Support EABI version 4 objects.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EABI version 4.
gas/
* config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
EF_ARM_EABI_VER4.
(arm_eabis): Ditto.
* doc/c-arm.texi: Document that we actually support -meabi=4, not
-meabi=3.
include/
* elf/arm.h (EF_ARM_EABI_VER4): Define.
|
|
"fopen-same.h". Update comment.
|
|
* cpu-i386.c (bfd_x86_64_arch_intel_syntax): Place last in chain.
Don't mark as default.
(bfd_x86_64_arch): Don't mark as default.
|
|
(elf_section_complain_discarded): Delete.
(elf_action_discarded): New function subsuming the above and also
controlling reloc behaviour.
(elf_link_input_bfd): Use it.
|
|
|
|
|
|
(fetch_fpregs): Use i387_supply_fxsave to fill the floating-point
registers when the floating-point state isn't initialized.
* Makefile.in (i386gnu-nat.o): Update dependencies.
|
|
entries.
(Acknowledgements): Use "GAS" instead of AS variable.
|
|
* regcache.c (regcache_raw_read): Comment was missing "to".
Extraneous ' removed.
* gdb_thread_db.h (struct td_thrinfo): ti_lid field
comment now describes use.
|
|
* cris-tdep.c (cris_sigtramp_start, cris_rt_sigtramp_start)
(cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache)
(cris_sigtramp_frame_this_id, cris_sigtramp_frame_prev_register)
(cris_sigtramp_frame_sniffer): New functions.
(cris_gdbarch_init): Hook in signal trampoline unwinder.
(cris_dwarf2_reg_to_regnum, cris_dwarf2_frame_init_reg): New functions.
(cris_gdbarch_init): Hook in Dwarf-2 unwinder.
(struct gdbarch_tdep, set_cris_dwarf2_cfi, cris_dump_tdep)
(cris_gdbarch_init, _initialize_cris_tdep): Add CRIS Dwarf-2 CFI usage
command.
(cris_version_update): Remove, replace with ...
(set_cris_version): New function.
(struct gdbarch_tdep, cris_mode, cris_mode_update)
(cris_cannot_store_register, cris_dump_tdep, cris_gdbarch_init)
(_initialize_cris_tdep): Remove CRIS mode command.
(cris_fpless_backtrace, _initialize_cris_tdep): Remove CRIS command for
framepointer-less backtrace.
(cris_scan_prologue): Fix prologue scanning limit.
(cris_register_type): Update to reflect actual registers.
(cris_register_bytes_ok) Remove.
(cris_gdbarch_init): Remove support for CRIS v8 and v9. Remove
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_byte, set_gdbarch_register_bytes_ok.
|