| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR 22699
* testsuite/gas/sh/sh4al-dsp.d: Update expected disassembly.
|
|
PR 22699
* sh-opc.h: Also use unsigned 8-bit immediate values for the LDRC
and SETRC insns.
|
|
detected. Disable all warnings unless the (new) lint mode is enabled.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
|
|
print_block_frame_labels has been commented out since 2010.
I don't think we need it; this patch removes it.
2020-04-29 Tom Tromey <tom@tromey.com>
* stack.c (print_block_frame_labels): Remove.
|
|
* aoutx.h (swap_std_reloc_out): Special case 64 bit relocations.
(aout_link_reloc_link_order): Likewise. Make r_length an unsigned.
|
|
translation for the opcodes sub-directory.
|
|
operand.
PR 22699
opcodes * sh-opc.h (IMM0_8): Replace with IMM0_8S and IMM0_8U. Use
IMM0_8S for arithmetic insns and IMM0_8U for logical insns.
* sh-dis.c (print_insn_sh): Change IMM0_8 case to IMM0_8S and add
IMM0_8U case.
gas * config/tc-sh.c (build_Mytes): Change operand type IMM0_8 to
IMM0_8S and add support for IMM0_8U.
* testsuite/gas/sh/sh4a.s: Add test of a logical insn using an
unsigned 8-bit immediate.
* testsuite/gas/sh/sh4a.d: Extended expected disassembly.
|
|
base is too high.
PR 25829
* testsuite/ld-scripts/default-script.exp: Add --image-base=0 to
LDFLAGS for targets *-*-mingw64 x86_64-*-cygwin.
* testsuite/ld-scripts/default-script1.d: No longer have to skip
test for those targets.
* testsuite/ld-scripts/default-script2.d: Likewise.
* testsuite/ld-scripts/default-script3.d: Likewise.
* testsuite/ld-scripts/default-script4.d: Likewise.
|
|
With target board debug-types, we have these FAILs:
...
FAIL: gdb.guile/scm-symtab.exp: test simple_struct in static symbols
FAIL: gdb.python/py-symtab.exp: test simple_struct in static symbols
...
due to PR gcc/90232, as explained in commit 15cd93d05e8 "[gdb/symtab] Handle
struct decl with DW_AT_signature".
Marks these as XFAILs.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-04-29 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (debug_types): New proc.
* gdb.guile/scm-symtab.exp: Add xfail for PR gcc/90232.
* gdb.python/py-symtab.exp: Same.
|
|
Currently, printing with array pretty formatting makes the output actually
less readable than without:
(gdb) p -array on -- {{1,2,3},{4,5,6}}
$1 = { {1,
2,
3},
{4,
5,
6}}
(gdb) p -array on -array-indexes on -- {{1,2,3},{4,5,6}}
$2 = {[0] = {[0] = 1,
[1] = 2,
[2] = 3},
[1] = {[0] = 4,
[1] = 5,
[2] = 6}}
These changes now also put the first element and the array end bracket on a new
line, similar to the structure pretty formatter:
(gdb) p -array on -- {{1,2,3},{4,5,6}}
$1 = {
{
1,
2,
3
},
{
4,
5,
6
}
}
(gdb) p -array on -array-indexes on -- {{1,2,3},{4,5,6}}
$2 = {
[0] = {
[0] = 1,
[1] = 2,
[2] = 3
},
[1] = {
[0] = 4,
[1] = 5,
[2] = 6
}
}
gdb/ChangeLog:
2020-04-29 Hannes Domani <ssbssa@yahoo.de>
PR gdb/17320
* ada-valprint.c (val_print_packed_array_elements): Move array
end bracket to new line.
(ada_val_print_string): Remove extra spaces before first array
element.
* c-valprint.c (c_value_print_array): Likewise.
* m2-valprint.c (m2_print_array_contents): Likewise.
(m2_value_print_inner): Likewise.
* p-valprint.c (pascal_value_print_inner): Likewise.
* valprint.c (generic_val_print_array): Likewise.
(value_print_array_elements): Move first array element and array
end bracket to new line.
gdb/testsuite/ChangeLog:
2020-04-29 Hannes Domani <ssbssa@yahoo.de>
PR gdb/17320
* gdb.base/pretty-array.c: New test.
* gdb.base/pretty-array.exp: New file.
|
|
With target board debug-types, we have:
...
FAIL: gdb.cp/cpexprs.exp: list policy1::function
...
This is a regression triggered by commit 770479f223e "gdb: Fix toplevel types
with -fdebug-types-section".
However, the FAIL is caused by commit 4dedf84da98 "Change
decode_compound_collector to use std::vector" which changes a VEC_iterate loop
into a range loop:
...
- for (ix = 0; VEC_iterate (symbolp, sym_classes, ix, sym); ++ix)
+ unsigned int ix = 0;
+ for (const auto &sym : *sym_classes)
...
but fails to ensure that the increment of ix happens every iteration.
Fix this by calculating the index variable at the start of the loop body:
...
for (const auto &elt : *sym_classes)
{
unsigned int ix = &elt - &*sym_classes->begin ();
...
Tested on x86_64-linux, with native and target board debug-types.
gdb/ChangeLog:
2020-04-29 Tom de Vries <tdevries@suse.de>
PR symtab/25889
* linespec.c (find_method): Fix ix calculation.
gdb/testsuite/ChangeLog:
2020-04-29 Tom de Vries <tdevries@suse.de>
PR symtab/25889
* gdb.cp/cpexprs.exp: Adapt for inclusion.
* gdb.cp/cpexprs-debug-types.exp: New file. Set -fdebug-types-section
and include cpexprs.exp.
|
|
|
|
All platforms on NetBSD use a shared system call table, so use a
single XML file to describe the system calls available on each NetBSD
platform.
gdb/ChangeLog:
* syscalls/update-netbsd.sh: New file.
* syscalls/netbsd.xml: Regenerate.
* data-directory/Makefile.in: Register `netbsd.xml' in
`SYSCALLS_FILES'
|
|
shellcheck reports:
In update-freebsd.sh line 72:
}' $1 >> freebsd.xml.tmp
^-- SC2086: Double quote to prevent globbing and word splitting.
Did you mean:
}' "$1" >> freebsd.xml.tmp
For more information:
https://www.shellcheck.net/wiki/SC2086 -- Double quote to prevent globbing ...
Add double quotes to fix it.
gdb/ChangeLog:
* syscalls/update-freebsd.sh: Add double quotes.
|
|
Now that Python code can create TUI windows, it seemed appropriate to
allow Python commands to appear in the "TUI" help class. This patch
adds this capability.
gdb/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* NEWS: Update.
* python/py-cmd.c (gdbpy_initialize_commands): Add COMMAND_TUI.
(cmdpy_init): Allow class_tui.
gdb/doc/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* python.texi (Commands In Python): Document gdb.COMMAND_TUI.
|
|
|
|
When debugging a program compiled with -fdebug-types-section,
only the first top-level type in each file is visible to gdb.
The problem was caused by moving the assignment to list_in_scope
from process_full_comp_unit and process_full_type_unit to
start_symtab. This was fine for process_full_comp_unit, because
symtabs and comp units are one-to-one. But there can be many type
units per symtab (one for each type), and we only call start_symtab
for the first one. This adds the necessary assignments on the paths
where start_symtab is not called.
gdb/Changelog:
2020-04-28 Mark Williams <mark@myosotissp.com>
PR gdb/24480
* dwarf2read.c: Add missing assingments to list_in_scope when
start_symtab was already called.
gdb/testsuite/Changelog:
2020-04-28 Mark Williams <mark@myosotissp.com>
PR gdb/24480
* dw4-toplevel-types.exp: Test for top level types.
* dw4-toplevel-types.cc: Test for top level types.
|
|
When building with g++ 4.8, we get this error (just an excerpt, because
g++ outputs a very long error message):
CXX dwarf2/read.o
...
/home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:14616:31: required from here
/usr/include/c++/4.8/bits/hashtable_policy.h:1070:12: error: invalid use of incomplete type ‘struct std::hash<sect_offset>’
struct _Hash_code_base<_Key, _Value, _ExtractKey, _H1, _H2,
This is the same problem and fix as in commit f23f598e28ad ("[gdb] Fix
build breaker with gcc 4.8"). Pass an explicit hash function rather
than relying on the default std::hash<sect_offset>.
gdb/ChangeLog:
PR gdb/25881
* dwarf2/read.c (offset_map_type): Use
gdb:hash_enum<sect_offset> as hash function.
|
|
PR 25876
PR demangler/94797
* cp-demangle.c (cplus_demangle_operators): Add ss <=> operator.
* testsuite/demangle-expected: Add operator<=> test.
|
|
gdb/stubs/ChangeLog:
2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* ia64vms-stub.c: Fix typo in comment (thead -> thread).
gdb/testsuite/ChangeLog:
2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.threads/stop-with-handle.exp: Fix typo in comment
(theads -> threads).
gdbsupport/ChangeLog:
2020-04-28 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb-sigmask.h: Fix typo (pthead_sigmask -> pthread_sigmask).
|
|
With test-case gdb.opt/inline-cmds.exp, we have:
...
KFAIL: gdb.opt/inline-cmds.exp: next to second func1 (PRMS: gdb/NNNN)
...
I've filed PR25884 for this failure.
Set the KFAIL PR accordingly.
gdb/testsuite/ChangeLog:
2020-04-28 Tom de Vries <tdevries@suse.de>
* gdb.opt/inline-cmds.exp: Set KFAIL PR.
|
|
When running test-case gdb.base/info-macros.exp, we have:
...
(gdb) KFAIL: gdb.base/info-macros.exp: info macros info-macros.c:42 \
(PRMS: gdb/NNNN)
...
The described failure mode however:
...
set test "info macros info-macros.c:42"
set r1 ".*define DEF_MACROS"
set r2 ".*define ONE"
setup_kfail "gdb/NNNN" *-*-*
gdb_test "$test" "$r1$r2"
...
does not match the actual output, given that both defines are in fact
printed.
The pattern fails to match because it's missing a trailing ".*".
Fix this by removing the KFAIL and adding the missing trailing ".*".
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-04-28 Tom de Vries <tdevries@suse.de>
* gdb.base/info-macros.exp: Remove KFAIL. Add missing trailing ".*".
|
|
When running test-case gdb.ada/array_ptr_renaming.exp we run into:
...
(gdb) print ntp^M
$3 = (3 => 30, 40)^M
(gdb) KFAIL: gdb.ada/array_ptr_renaming.exp: print ntp (PRMS: gdb/NNNN)
...
I've opened PR25883 for this failure. Reference the PR from the KFAIL, such
that we have:
...
KFAIL: gdb.ada/array_ptr_renaming.exp: print ntp (PRMS: gdb/25883)
...
gdb/testsuite/ChangeLog:
2020-04-28 Tom de Vries <tdevries@suse.de>
* gdb.ada/array_ptr_renaming.exp: Add PR number in KFAIL.
|
|
Consider a test-case with sources 36.c:
...
struct s { int i; };
extern void f (void);
int main (void) {
struct s a;
f ();
return 0;
}
...
and 36b.c:
...
struct s { int j; };
void f (void) {
struct s b;
}
...
compiled like this:
...
$ gcc 36.c 36b.c -g
...
It contains DWARF like this:
...
<0><d2>: Abbrev Number: 1 (DW_TAG_compile_unit)
<d8> DW_AT_name : 36.c
<1><f4>: Abbrev Number: 2 (DW_TAG_structure_type)
<f5> DW_AT_name : s
<2><fe>: Abbrev Number: 3 (DW_TAG_member)
<ff> DW_AT_name : i
<1><110>: Abbrev Number: 5 (DW_TAG_subprogram)
<111> DW_AT_name : main
<2><12d>: Abbrev Number: 6 (DW_TAG_variable)
<12e> DW_AT_name : a
<132> DW_AT_type : <0xf4>
<0><146>: Abbrev Number: 1 (DW_TAG_compile_unit)
<14c> DW_AT_name : 36b.c
<1><168>: Abbrev Number: 2 (DW_TAG_structure_type)
<169> DW_AT_name : s
<2><172>: Abbrev Number: 3 (DW_TAG_member)
<173> DW_AT_name : j
<1><184>: Abbrev Number: 5 (DW_TAG_subprogram)
<185> DW_AT_name : f
<2><19b>: Abbrev Number: 6 (DW_TAG_variable)
<19c> DW_AT_name : b
<1a0> DW_AT_type : <0x168>
...
And when printing "struct s", we get first a random one (with int j), and then
context-specific ones (with int i in main, and int j in f):
...
$ gdb -batch a.out \
-ex "ptype struct s" \
-ex start \
-ex "ptype struct s" \
-ex "break f" -ex continue \
-ex "ptype struct s" \
| grep "int [ij];"
int j;
int i;
int j;
...
Same for -readnow.
However, if we use -fdebug-types-section:
...
$ gcc 36.c 36b.c -g -fdebug-types-section
...
we get:
...
$ gdb ... | grep "int [ij];"
int j;
int i;
int i;
$ gdb -readnow ... | grep "int [ij];"
int j;
int j;
int j;
...
This is due to the fact that both "struct s" DIEs have been moved to the
.debug_types section:
...
Compilation Unit @ offset 0x0:
Signature: 0xfd1462823bb6f7b7
<0><17>: Abbrev Number: 1 (DW_TAG_type_unit)
<1><1d>: Abbrev Number: 2 (DW_TAG_structure_type)
<1e> DW_AT_name : s
<2><27>: Abbrev Number: 3 (DW_TAG_member)
<28> DW_AT_name : i
Compilation Unit @ offset 0x3a:
Signature: 0x534310fbefba324d
<0><51>: Abbrev Number: 1 (DW_TAG_type_unit)
<1><57>: Abbrev Number: 2 (DW_TAG_structure_type)
<58> DW_AT_name : s
<2><61>: Abbrev Number: 3 (DW_TAG_member)
<62> DW_AT_name : j
...
and there's no longer a "struct s" DIE in the 36.c and
and 36b.c CUs to specify which "struct s" belongs in the CU. This is gcc
PR90232.
However, using a tentative patch for gcc that adds these DIEs (according to
DWARF standard: If the complete declaration of a type has been placed in a
separate type unit, an incomplete declaration of that type in the compilation
unit may provide the unique 64-bit signature of the type using a
DW_AT_signature attribute):
...
<0><d2>: Abbrev Number: 5 (DW_TAG_compile_unit)
<d8> DW_AT_name : 36.c
+ <1><f4>: Abbrev Number: 6 (DW_TAG_structure_type)
+ <f5> DW_AT_name : s
+ <f7> DW_AT_signature : signature: 0xfd1462823bb6f7b7
+ <ff> DW_AT_declaration : 1
<0><13c>: Abbrev Number: 5 (DW_TAG_compile_unit)
<142> DW_AT_name : 36b.c
+ <1><15e>: Abbrev Number: 6 (DW_TAG_structure_type)
+ <15f> DW_AT_name : s
+ <161> DW_AT_signature : signature: 0x534310fbefba324d
+ <169> DW_AT_declaration : 1
...
still does not help, because they're declarations, so new_symbol is not called
for them in process_structure_scope.
Fix this by calling new_symbol for these decls.
Build and tested on x86_64-linux.
Also tested with target board enabling by default -fdebug-types-section
-gdwarf-4, and with gcc with aforementioned tentative patch. In this
configuration, the patch reduces number of FAILs from 2888 to 238.
gdb/ChangeLog:
2020-04-28 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (process_structure_scope): Add symbol for struct decl
with DW_AT_signature.
gdb/testsuite/ChangeLog:
2020-04-28 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/main-foo.c: New test.
* gdb.dwarf2/struct-with-sig.exp: New file.
|
|
|
|
The zero check was on the wrong operand. And, yes, the second operand
popped is supposed to be divided by the first operand popped.
* vms-alpha.c (_bfd_vms_slurp_etir): Correct divide by zero check.
Emit warning message.
|
|
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
|
|
I recently stumbled on this code mentioning Linux kernel 2.6.25, and
thought it could be time for some spring cleaning (newer GDBs probably
don't need to supports 12-year old kernels). I then found that the
"legacy" case is probably broken anyway, which gives an even better
motivation for its removal.
In short, this patch removes the configure checks that check if
user_regs_struct contains the fs_base/gs_base fields and adjusts all
uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The
longer explanation/rationale follows.
Apparently, Linux kernels since 2.6.25 (that's from 2008) have been
reliably providing fs_base and gs_base as part of user_regs_struct.
Commit df5d438e33d7 in the Linux kernel [1] seems related. This means
that we can get these values by reading registers with PTRACE_GETREGS.
Previously, these values were obtained using a separate
PTRACE_ARCH_PRCTL ptrace call.
First, I'm not even sure the configure check was really right in the
first place.
The user_regs_struct used by GDB comes from
/usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other
distros) and is provided by glibc. glibc has had the fs_base/gs_base
fields in there for a very long time, at least since this commit from
2001 [2]. The Linux kernel also has its version of user_regs_struct,
which I think was exported to user-space at some point. It included the
fs_base/gs_base fields since at least this 2002 commit [3]. In any
case, my conclusion is that the fields were there long before the
aforementioned Linux kernel commit. The kernel commit didn't add these
fields, it only made sure that they have reliable values when obtained
with PTRACE_GETREGS.
So, checking for the presence of the fs_base/gs_base fields in struct
user_regs_struct doesn't sound like a good way of knowing if we can
reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess
is that if we were using that strategy on a < 2.6.25 kernel, things
would not work correctly:
- configure would find that the user_regs_struct has the fs_base/gs_base
fields (which are probided by glibc anyway)
- we would be reading the fs_base/gs_base values using PTRACE_GETREGS,
for which the kernel would provide unreliable values
Second, I have tried to see how things worked by forcing GDB to not use
fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy"
code, by configuring with
ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no
Doing so breaks writing registers back to the inferior. For example,
calling an inferior functions gives an internal error:
(gdb) p malloc(10)
/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152
The relevant last frames where this error happens are:
#8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55
#9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408
#10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448
#11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335
#12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485
#13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765
#14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778
#15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283
#16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103
#17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151
The problem seems to be that amd64_linux_nat_target::store_registers
calls amd64_native_gregset_supplies_p to know whether gregset provides
fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE,
amd64_native_gregset_supplies_p returns false. store_registers
therefore assumes that it must be an "xstate" register. This is of
course wrong, and that leads to the failed assertion when
i387_collect_xsave doesn't recognize the register.
amd64_linux_nat_target::store_registers could probably be fixed to
handle this case, but I don't think it's worth it, given that it would
only be to support very old kernels.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68
gdb/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* amd64-nat.c (amd64_native_gregset_reg_offset): Adjust.
* amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers,
amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust.
gdbserver/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* linux-x86-low.cc (x86_64_regmap, x86_fill_gregset,
x86_store_gregset): Adjust.
|
|
This expands the Python dynamic type documentation, as suggested by
Christian.
gdb/doc/ChangeLog
2020-04-27 Tom Tromey <tromey@adacore.com>
* python.texi (Types In Python): Mention missing fields. Add
dynamic type example.
|
|
In PR 25731 [1], the following build failure was reported:
../../binutils-gdb/gdb/gdbtypes.c:1254:10: error: no member named 'abs' in namespace 'std'; did you mean simply 'abs'?
= ((std::abs (stride) * element_count) + 7) / 8;
^~~~~~~~
abs
/usr/include/stdlib.h:129:6: note: 'abs' declared here
int abs(int) __pure2;
^
The original report was using:
$ gcc -v
Apple LLVM version 8.0.0 (clang-800.0.42.1)
Target: x86_64-apple-darwin15.6.0
Note that I was _not_ able to reproduce using:
$ g++ --version
Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/c++/4.2.1
Apple clang version 11.0.0 (clang-1100.0.33.17)
Target: x86_64-apple-darwin19.3.0
The proposed fix is to include <cstdlib> in addition to <stdlib.h>.
Here's an excerpt of [2] relevant to this problem:
These headers [speaking of the .h form] are allowed to also declare
the same names in the std namespace, and the corresponding cxxx
headers are allowed to also declare the same names in the global
namespace: including <cstdlib> definitely provides std::malloc and
may also provide ::malloc. Including <stdlib.h> definitely provides
::malloc and may also provide std::malloc
Since we use std::abs, we should not assume that our include of stdlib.h
declares an `abs` function in the `std` namespace.
If we replace the include of stdlib.h with cstdlib, then we fall in the
opposite situation. A standard C++ library may decide to only put the
declarations in the std namespace, requiring us to prefix all standard
functions with `std::`. I'm not against that, but for the moment I think the
safest way forward is to just include both.
Note that I don't know what effect this patch can have on any stdlib.h fix
provided by gnulib.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=25731
[2] https://en.cppreference.com/w/cpp/header#C_compatibility_headers
gdbsupport/ChangeLog:
* common-defs.h: Include cstdlib.h.
|
|
Commit 5939967b355ba6a940887d19847b7893a4506067 fixed inline
frame unwinding breakage for some targets (aarch64, riscv, s390...)
but regressed a few amd64 testcases related to tailcalls.
Given the following example situation...
Frame #-1 - sentinel frame
Frame # 0 - inline frame
Frame # 1 - normal frame
... suppose we're at level #1 and call into dwarf2_tailcall_sniffer_first.
We'll attempt to fetch PC, which used to be done via the gdbarch_unwind_pc call
(before 5939967b355ba6a940887d19847b7893a4506067), but now it is being handled
by the get_frame_register function.
gdbarch_unwind_pc will attempt to use frame #1's cache to retrieve information
about the PC. Here's where different architectures behave differently.
x86_64 will find a dwarf rule to retrieve PC from memory, at a CFA + offset
location. So the PC value is readily available and there is no need to
create a lazy value.
For aarch64 (and others), GCC doesn't emit an explicit location for PC, so we
eventually will find that PC is DWARF2_FRAME_REG_UNSPECIFIED. This is known
and is handled by GDB by assuming GCC really meant DWARF2_FRAME_REG_SAME_VALUE.
This means we'll attempt to fetch the register value from frame #0, via a call
to frame_unwind_got_register, which will trigger the creation of a lazy value
that requires a valid frame id for frame #0.
We don't have a valid id for frame #0 yet, so we assert.
Given the above, the following patch attempts to handle the situation without
being too hacky. We verify if the next frame is an inline frame and if its
frame id has been computed already. If it hasn't been computed yet, then we
use the safer get_frame_register function, otherwise we use the regular
gdbarch_unwind_pc hook.
gdb/ChangeLog:
2020-04-27 Luis Machado <luis.machado@linaro.org>
* dwarf2/frame-tailcall.c (dwarf2_tailcall_sniffer_first): Handle
problematic inline frame unwinding situation.
* frame.c (frame_id_computed_p): New function.
* frame.h (frame_id_computed_p): New prototype.
|
|
if the source file specifically requests to use the assigned slot.
PR 25878
* dwarf2dbg.c (struct file_entry): Add auto_assigned field.
(assign_file_to_slot): New function. Fills in an entry in the
files table.
(allocate_filenum): Use new function.
(allocate_filename_to_slot): Use new function. If the specified
slot entry is already in use, but was chosen automatically then
reassign the automatic entry.
|
|
|
|
The class_pseudo constant is unused, so this removes it.
Tested by rebuilding.
gdb/ChangeLog
2020-04-26 Tom Tromey <tom@tromey.com>
* command.h (enum command_class) <class_pseudo>: Remove.
|
|
This fixes another missing error check.
* readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
read before dereferencing, and gracefully return. Remove
gnu_hash_error variable. Free gnu hash arrays if number of
syms found is zero.
|
|
2020-04-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.c (lookup_cmd_composition): Fix comments
and whitespace.
|
|
1.Implict load for POP/POPF/POPA/XLATB, no load for Anysize insns
2. Add -mlfence-before-ret=shl/yes, adjust operand size of
or/not/shl according to ret's.
3. Issue warning for REP CMPS/SCAS since they would affect control
flow behavior.
4. Adjust testcases and documents.
gas/Changelog:
* config/tc-i386.c (lfence_before_ret_shl): New member.
(load_insn_p): implict load for POP/POPA/POPF/XLATB, no load
for Anysize insns.
(insert_after_load): Issue warning for REP CMPS/SCAS.
(insert_before_before): Handle iret, Handle
-mlfence-before-ret=shl, Adjust operand size of or/not/shl to ret's,
(md_parse_option): Change -mlfence-before-ret=[none|not|or] to
-mlfence-before-ret=[none/not/or/shl/yes].
Enable -mlfence-before-ret=shl when
-mlfence-beofre-indirect-branch=all and no explict -mlfence-before-ret option.
(md_show_usage): Ditto.
* doc/c-i386.texi: Ditto.
* testsuite/gas/i386/i386.exp: Add new testcases.
* testsuite/gas/i386/lfence-load-b.d: New.
* testsuite/gas/i386/lfence-load-b.e: New.
* testsuite/gas/i386/lfence-load.d: Modified.
* testsuite/gas/i386/lfence-load.e: New.
* testsuite/gas/i386/lfence-load.s: Modified.
* testsuite/gas/i386/lfence-ret-a.d: Modified.
* testsuite/gas/i386/lfence-ret-b.d: Modified.
* testsuite/gas/i386/lfence-ret-c.d: New.
* testsuite/gas/i386/lfence-ret-d.d: New.
* testsuite/gas/i386/lfence-ret.s: Modified.
* testsuite/gas/i386/x86-64-lfence-load-b.d: New.
* testsuite/gas/i386/x86-64-lfence-load.d: Modified.
* testsuite/gas/i386/x86-64-lfence-load.s: Modified.
* testsuite/gas/i386/x86-64-lfence-ret-a.d: Modified.
* testsuite/gas/i386/x86-64-lfence-ret-b.d: Modified.
* testsuite/gas/i386/x86-64-lfence-ret-c.d: New.
* testsuite/gas/i386/x86-64-lfence-ret-d.d: New
* testsuite/gas/i386/x86-64-lfence-ret-e.d: New.
* testsuite/gas/i386/x86-64-lfence-ret.e: New.
* testsuite/gas/i386/x86-64-lfence-ret.s: New.
|
|
|
|
Remove unused PT_GET_PROCESS_STATE block. It used to be used
by OpenBSD, but it is now reimplemented independently in
obsd-nat.c.
gdb/ChangeLog:
* inf-ptrace.c (inf_ptrace_target::wait): Remove
`PT_GET_PROCESS_STATE' block.
Change-Id: I9b872df8517b658c0dfe889fc1e4a7009bc5c076
|
|
This patch adds a target board debug-types that switches on
-fdebug-types-section by default.
This -fdebug-types-section option is a gcc option that enables the generation
of a .debug_types section, which is only effective for DWARF version 4.
There are two other boards that enable this: dwarf4-gdb-index and fisson, but
while those test some meaningful combination of options, this board is
intended to test only -fdebug-types-section.
Current results with gcc 7.5.0 are:
...
=== gdb Summary ===
# of expected passes 75832
# of unexpected failures 2841
# of expected failures 130
# of known failures 75
# of unresolved testcases 22
# of untested testcases 37
# of unsupported tests 83
...
Related known issues:
- PR gcc/90232 - "gcc drops top-level dies with -fdebug-types-section"
- PR gdb/25875 - "segv in ada_discrete_type_low_bound"
- PR gdb/14148 - "-fdebug-types-section regresses static scope of types"
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-04-25 Tom de Vries <tdevries@suse.de>
* boards/debug-types.exp: New file.
|
|
Having paths in test names makes it harder to compare results from
different builds of GDB.
gdb/testsuite/ChangeLog:
* gdb.btrace/multi-inferior.exp: Avoid paths in test names.
|
|
|
|
Now that symbol_get_demangled_name is only used by general_symbol_info
methods, and because these methods already check the symbol's language
to decide what to return, symbol_get_demangled_name is no longer
needed. This patch removes it.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* symtab.h (symbol_get_demangled_name): Don't declare.
* symtab.c (symbol_get_demangled_name): Remove.
(general_symbol_info::natural_name)
(general_symbol_info::demangled_name): Update.
|
|
PR rust/25025 notes that some Rust test cases fail.
Debugging gdb revealed that the Rust compiler emits different linkage
names that demangle to the same result. Enabling complaints when
reading the test case is enough to show it:
During symbol reading: Computed physname <generics::identity<f64>> does not match demangled <generics::identity> (from linkage <_ZN8generics8identity17h8540b320af6656d6E>) - DIE at 0x424 [in module /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.rust/generics/generics]
During symbol reading: Computed physname <generics::identity<u32>> does not match demangled <generics::identity> (from linkage <_ZN8generics8identity17hae302fad0c33bd7dE>) - DIE at 0x459 [in module /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.rust/generics/generics]
...
This patch changes the DWARF reader to prefer the computed physname,
rather than the output of the demangler, for Rust. This fixes the
bug.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
PR rust/25025:
* dwarf2/read.c (dwarf2_physname): Do not demangle for Rust.
|
|
The DWARF reader has had some odd code since the "physname" patches landed.
In particular, these patches caused PR symtab/12707; namely, they made
it so "set print demangle off" no longer works.
This patch attempts to fix the problem. It arranges to store the
linkage name on the symbol if it exists, and it changes the DWARF
reader so that the demangled name is no longer (usually) stored in the
symbol's "linkage name" field.
c-linkage-name.exp needed a tweak, because it started working
correctly. This conforms to what I think ought to happen, so this
seems like an improvement here.
compile-object-load.c needed a small change to use
symbol_matches_search_name rather than directly examining the linkage
name. Looking directly at the name does the wrong thing for C++.
There is still some name-related confusion in the DWARF reader:
* "physname" often refers to the logical name and not what I would
consider to be the "physical" name;
* dwarf2_full_name, dwarf2_name, and dwarf2_physname all exist and
return different strings -- but this seems like at least one name
too many. For example, Fortran requires dwarf2_full_name, but other
languages do not.
* To my surprise, dwarf2_physname prefers the form emitted by the
demangler over the one that it computes. This seems backward to me,
given that the partial symbol reader prefers the opposite, and it
seems to me that this choice may perform better as well.
I didn't attempt to clean up these things. It would be good to do,
but whenever I contemplate it I get caught up in dreams of truly
rewriting the DWARF reader instead.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
PR symtab/12707:
* dwarf2/read.c (add_partial_symbol): Use the linkage name if it
exists.
(new_symbol): Likewise.
* compile/compile-object-load.c (get_out_value_type): Use
symbol_matches_search_name.
gdb/testsuite/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
PR symtab/12707:
* gdb.python/py-symbol.exp: Update expected results for
linkage_name test.
* gdb.cp/print-demangle.exp: New file.
* gdb.base/c-linkage-name.exp: Fix test.
* gdb.guile/scm-symbol.exp: Update expected results for
linkage_name test.
|
|
As mentioned in another thread, there's currently no need to call
compute_and_set_names for partial symbols. Because the DWARF partial
symbol reader constructs demangled names, this call can only demangle
a name by mistake.
So, this patch changes the DWARF reader to simply set the linkage name
on the new symbol. This is equivalent to what was done before. There
should be no user-visible change from this patch, aside from gdb
speeding up a bit.
... there *should* be, but this regressed
dw2-namespaceless-anonymous.exp. However, upon examination, I think
that test is incorrect. It puts a mangled name into DW_AT_name, and
it puts the variable at the top level, not in a namespace. This isn't
what C++ compilers ought to do. So, this patch also updates the test
case.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (add_partial_symbol): Do not call
compute_and_set_names.
gdb/testsuite/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/dw2-namespaceless-anonymous.S: Remove.
* gdb.dwarf2/dw2-namespaceless-anonymous.c: New file.
* gdb.dwarf2/dw2-namespaceless-anonymous.exp: Use DWARF
assembler.
|
|
This changes the DWARF reader to use the new add_psymbol_to_list
overload. There should be no visible changes due to this patch.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (add_partial_symbol): Use new add_psymbol_to_list
overload.
|
|
This adds a new overload of add_psymbol_to_list. This one takes an
already constructed psymbol and adds it to the bcache and the
appropriate list.
This seemed cleaner than continuing to add parameters to the existing
add_psymbol_to_list, and is more in line with how full symbols are
constructed.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* psymtab.c (add_psymbol_to_bcache): Simplify calling convention.
(add_psymbol_to_list): New overload. Make old overload call new
one.
* psympriv.h (add_psymbol_to_list): New overload.
|
|
The full DIE reader checks that an attribute has a "string" form in
some spots, but the partial DIE reader does not. This patch brings
the two readers in sync for one specific case, namely when examining
the linkage name. This avoids regressions in an existing DWARF test
case.
A full fix for this problem would be preferable. An accessor like
DW_STRING should always check the form. However, I haven't attempted
that in this series.
Also the fact that the partial and full readers can disagree like this
is a design flaw.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (partial_die_info::read) <case
DW_AT_linkage_name>: Use value_as_string.
(dwarf2_string_attr): Use value_as_string.
* dwarf2/attribute.h (struct attribute) <value_as_string>: Declare
method.
* dwarf2/attribute.c (attribute::value_as_string): New method.
|
|
Two methods on general_symbol_info did not handle the language_rust
case. I don't think these problems can be noticed with the current
code (which is why the bugs went unnoticed), but a future patch will
change this.
gdb/ChangeLog
2020-04-24 Tom Tromey <tom@tromey.com>
* symtab.c (general_symbol_info::natural_name)
(general_symbol_info::demangled_name): Check for language_rust.
|
