| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove `TYPE_NFIELDS`, changing all the call sites to use
`type::num_fields` directly. This is quite a big diff, but this was
mostly done using sed and coccinelle. A few call sites were done by
hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_NFIELDS): Remove. Change all cal sites to use
type::num_fields instead.
Change-Id: Ib73be4c36f9e770e0f729bac3b5257d7cb2f9591
|
|
Add the `num_fields` and `set_num_fields` methods on `struct type`, in
order to remove the `TYPE_NFIELDS` macro. In this patch, the
`TYPE_NFIELDS` macro is changed to use `type::num_fields`, so all the
call sites that are used to set the number of fields are changed to use
`type::set_num_fields`. The next patch will remove `TYPE_NFIELDS`
completely.
I think that in the future, we should consider making the interface of
`struct type` better. For example, right now it's possible for the
number of fields property and the actual number of fields set to be out
of sync. However, I want to keep the existing behavior in this patch,
just translate from macros to methods.
gdb/ChangeLog:
* gdbtypes.h (struct type) <num_fields, set_num_fields>: New
methods.
(TYPE_NFIELDS): Use type::num_fields. Change all call sites
that modify the number of fields to use type::set_num_fields
instead.
Change-Id: I5ad9de5be4097feaf942d111077434bf91d13dc5
|
|
Commit c9e0a7e3331 ("Remove munmap_listp_free_cleanup") removed
munmap_listp_free, but missed a declaration. This patch removes that
as well.
gdb/ChangeLog
2020-05-22 Tom Tromey <tromey@adacore.com>
* compile/compile-object-load.h (munmap_list_free): Don't
declare.
|
|
This undoes most of the changes from these commits:
commit ec8e2b6d3051f0b4b2a8eee9917898e95046c62f
Date: Fri Jun 14 23:43:00 2019 +0100
gdb: Don't allow annotations to influence what else GDB prints
commit 0d3abd8cc936360f8c46502135edd2e646473438
Date: Wed Jun 12 22:34:26 2019 +0100
gdb: Remove an update of current_source_line and current_source_symtab
as a result of the discussion here:
https://sourceware.org/pipermail/gdb/2020-April/048468.html
Having taken time to reflect on the discussion, and reading the
documentation again I believe we should revert GDB's behaviour back to
how it used to be.
The original concern that triggered the initial patch was that when
annotations were on the current source and line were updated (inside
the annotation code), while when annotations are off this update would
not occur. This was incorrect, as printing the source with the call
to print_source_lines does also update the current source and line.
Further, the documentation here:
https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Annotations.html#Source-Annotations
Clearly states:
"The following annotation is used instead of displaying source code:
^Z^Zsource filename:line:character:middle:addr
..."
So it is documented that the 'source' annotation is a replacement for,
and not in addition to, actually printing the source lie.
There are still a few issues that I can see, these are:
1. In source.c:info_line_command, when annotations are on we call
annotate_source_line, however, if annotations are off then there is
no corresponding call to print the source line. This means that a
if a user uses 'info line ...' with annotations on, and then does a
'list', they will get different results than if they had done this
with annotations off.
2. It bothers me that the call to annotate_source_line returns a
boolean, and that this controls a call to print_source_line (in
stack.c:print_frame_info).
The reason for this is that the source line annotation will only
print something if the file is found, and the line number is in
range for the file.
It seems to me like an annotation should always be printed, either
one that identifies the file and line, or one that identifies the
file and line GDB would like to access, but couldn't.
I considered changing this, but in the end decided not too, if I
extend the existing 'source' annotation to print something in all
cases then I risk breaking existing UIs that rely on the file and
line always being valid. If I add a new annotation then this might
also break existing UIs that rely on GDB itself printing the error
from within print_source_line.
Given that annotations is deprecated (as I understand it) mechanism
for UIs to interact with GDB (in favour of MI) I figure we should just
restore the old behaviour, and leave the mini-bugs in until someone
actually complains.
This isn't a straight revert of the two commits mentioned above. I've
left annotate_source_line instead of going back to the original
identify_source_line, which lived in source.c, but was really
annotation related. The API for setting the current source and line
has changed since the original patches, so I updated for that change
too. Finally I wrote the code in stack.c so that we avoided an extra
level of indentation, which I felt made things easier to read.
gdb/ChangeLog:
* annotate.c (annotate_source_line): Update return type, add call
to update current symtab and line.
* annotate.h (annotate_source_line): Update return type, and
extend header comment.
* source.c (info_line_command): Check annotation_level before
calling annotate_source_line.
* stack.c (print_frame_info): If calling annotate_source_line
returns true, then don't print any other source line information.
gdb/testsuite/ChangeLog:
* gdb.base/annota1.exp: Update expected results.
* gdb.cp/annota2.exp: Update expected results, remove duplicate
test name.
* gdb.cp/annota3.exp: Update expected results.
|
|
PR 25882
bfd/
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Don't init FP
attributes from shared libraries, and do not return an error if
they don't match.
gold/
* powerpc.cc (merge_object_attributes): Replace name param with
obj param. Update callers. Don't init FP attributes from shared
libraries, and do not emit an error if they don't match.
|
|
|
|
Building with clang 11, we get:
/home/smarchi/src/binutils-gdb/gdb/lm32-tdep.c:84:44: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
return ((regnum >= SIM_LM32_EA_REGNUM) && (regnum <= SIM_LM32_BA_REGNUM))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Indeed, this doesn't make sense, as EA_REGNUM is greater than BA_REGNUM.
I'll assume that it was just a mistake and that these two should be
swapped.
The regnums for BA and EA are contiguous, so ultimately this particular
part of the condition is only true if regnum is == EA or == BA. These
registers are Exception Address and Breakpoint Address, so I guess it
makes sense for them to be in the system register group.
The relevant reference is here:
https://www.latticesemi.com/-/media/LatticeSemi/Documents/UserManuals/JL/LatticeMico32ProcessorReferenceManual39.ashx?document_id=52077
gdb/ChangeLog:
* lm32-tdep.c (lm32_register_reggroup_p): Fix condition.
|
|
I was inspired by a series of patches merged by Alan Modra in the other
projects, so I did the same in GDB with a bit of Coccinelle and grep.
This patch removes the unnecessary NULL checks before calls to xfree.
They are unnecessary because xfree already does a NULL check. Since
free is supposed to handle NULL values correctly, the NULL check in
xfree itself is also questionable, but I've left it there for now.
gdb/ChangeLog:
* coffread.c (patch_type): Remove NULL check before xfree.
* corefile.c (set_gnutarget): Likewise.
* cp-abi.c (set_cp_abi_as_auto_default): Likewise.
* exec.c (build_section_table): Likewise.
* remote.c (remote_target::pass_signals): Likewise.
* utils.c (n_spaces): Likewise.
* cli/cli-script.c (document_command): Likewise.
* i386-windows-tdep.c (core_process_module_section): Likewise.
* linux-fork.c (struct fork_info) <~fork_info>: Likewise.
|
|
git commit 7b958a48e132 put the bfd filename in the bfd objalloc
memory. That means the filename is freed by _bfd_free_cached_info.
Which is called by _bfd_compute_and_write_armap to tidy up symbol
tables after they are done with.
Unfortunately, _bfd_write_archive_contents wants to seek and read from
archive elements after that point, and if the number of elements
exceeds max_open_files in cache.c then some of those elements will
have their files closed. To reopen, you need the filename.
PR 25993
* opncls.c (_bfd_free_cached_info): Keep a copy of the bfd
filename.
(_bfd_delete_bfd): Free the copy.
(_bfd_new_bfd): Free nbfd->memory on error.
|
|
cpu/
* mep.opc (mep_cgen_expand_macros_and_parse_operand): Replace
"if (x) free (x)" with "free (x)".
opcodes/
* arc-ext.c: Replace "if (x) free (x)" with "free (x)" throughout.
* sparc-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* bpf-desc.c: Regenerate.
* epiphany-desc.c: Regenerate.
* fr30-desc.c: Regenerate.
* frv-desc.c: Regenerate.
* ip2k-desc.c: Regenerate.
* iq2000-desc.c: Regenerate.
* lm32-desc.c: Regenerate.
* m32c-desc.c: Regenerate.
* m32r-desc.c: Regenerate.
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mt-desc.c: Regenerate.
* or1k-desc.c: Regenerate.
* xc16x-desc.c: Regenerate.
* xstormy16-desc.c: Regenerate.
|
|
* deffilep.y: Replace "if (x) free (x)" with "free (x)" thoughout.
* emultempl/elf.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/xtensaelf.em: Likewise.
* ldelf.c: Likewise.
* ldfile.c: Likewise.
* ldmain.c: Likewise.
* ldmisc.c: Likewise.
* lexsup.c: Likewise.
* pe-dll.c: Likewise.
|
|
* utils.c (print_name_only): Free demangled without checking
first for non-NULL.
|
|
* atof-generic.c: Replace "if (x) free (x)" with "free (x)"
throughout.
* config/obj-elf.c: Likewise.
* config/tc-aarch64.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-tic30.c: Likewise.
* ecoff.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
* symbols.c: Likewise.
* testsuite/gas/all/test-gen.c: Likewise.
|
|
* addr2line.c: Replace "if (x) free (x)" with "free (x)" throughout.
* dlltool.c: Likewise.
* elfcomm.c: Likewise.
* rddbg.c: Likewise.
* readelf.c: Likewise.
* stabs.c: Likewise.
* windmc.c: Likewise.
* windres.c: Likewise.
* wrstabs.c: Likewise.
|
|
* aoutx.h: Replace "if (x) free (x)" with "free (x)" throughout.
* archive.c, * bfd.c, * bfdio.c, * coff-alpha.c, * coff-ppc.c,
* coff-sh.c, * coff-stgo32.c, * coffcode.h, * coffgen.c,
* cofflink.c, * cpu-arm.c, * doc/chew.c, * dwarf2.c, * ecoff.c,
* ecofflink.c, * elf-eh-frame.c, * elf-m10200.c, * elf-m10300.c,
* elf-strtab.c, * elf.c, * elf32-arc.c, * elf32-arm.c,
* elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-crx.c,
* elf32-epiphany.c, * elf32-ft32.c, * elf32-h8300.c,
* elf32-ip2k.c, * elf32-m32c.c, * elf32-m68hc11.c,
* elf32-m68k.c, * elf32-microblaze.c, * elf32-msp430.c,
* elf32-nds32.c, * elf32-nios2.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-sh.c, * elf32-spu.c,
* elf32-v850.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c
* elf64-mmix.c, * elf64-ppc.c, * elf64-sparc.c, * elfcode.h,
* elflink.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-mips.c,
* elfxx-x86.c, * format.c, * ihex.c, * libbfd.c, * linker.c,
* mmo.c, * opncls.c, * pdp11.c, * peXXigen.c, * pef.c,
* peicode.h, * simple.c, * som.c, * srec.c, * stabs.c, * syms.c,
* targets.c, * vms-lib.c, * xcofflink.c, * xtensa-isa.c: Likewise.
|
|
* readelf.c (get_num_dynamic_syms): Bounds check mipsxlat array
access.
|
|
|
|
This patch started as an investigation of this bug, where the program is
re-compiled between two "start" runs:
$ ./gdb -nx --data-directory=data-directory -q a.out
Reading symbols from a.out...
(gdb) start
Temporary breakpoint 1 at 0x1131: file test.c, line 1.
Starting program: /home/smarchi/build/wt/test/gdb/a.out
Temporary breakpoint 1, main () at test.c:1
1 int main() { return 0; }
*** re-compile a.out ***
(gdb) start
The program being debugged has been started already.
Start it from the beginning? (y or n) y
`/home/smarchi/build/wt/test/gdb/a.out' has changed; re-reading symbols.
Temporary breakpoint 2 at 0x555555555129: file test.c, line 1.
Starting program: /home/smarchi/build/wt/test/gdb/a.out
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Temporary breakpoint 2, main () at test.c:1
1 int main() { return 0; }
(gdb)
To reproduce the bug, a.out needs to be a position-independent
executable (PIE).
Here's what happens:
1) We first read the symbols of a.out. The section offsets in the
objfile are all 0, so the symbols are created unrelocated.
2) The breakpoint on main is created, as you can see the breakpoint
address (derived from the `main` symbol with value 0x1129) is still
unrelocated (0x1131). Since the program is not yet started, we don't
know at which base address the executable is going to end at.
Everything good so far.
3) The execution starts, GDB finds out the executable's base address,
fills the objfile's section_offsets vector with a bunch of offsets,
and relocates the symbols with those offsets. The latter modifies
the symbol values (the `main` symbol is changed from 0x1129 to
0x555555555129).
4) We `start` again, we detect that `a.out` has changed, the
`reread_symbols` function kicks in. It tries to reset everything
in the `struct objfile` corresponding to `a.out`, except that it
leaves the `section_offsets` vector there.
5) `reread_symbols` reads the debug info (calls `read_symbols`). As the
DWARF info is read, symbols are created using the old offsets still
in `section_offsets`. For example, the `main` symbol is created with
the value 0x555555555129. Even though at this point there is no
process, so that address is bogus. There's probably more that
depends on section_offsets that is not done correctly.
6) Something in the SVR4 solib handling goes wrong, probably because
of something that went wrong in (5). I can't quite explain it (if
somebody would like to provide a more complete analysis, please go
ahead). But this is where it takes a wrong turn:
#0 elf_locate_base () at /home/smarchi/src/wt/test/gdb/solib-svr4.c:799
#1 0x000055f0a5bee6d5 in locate_base (info=<optimized out>) at /home/smarchi/src/wt/test/gdb/solib-svr4.c:848
#2 0x000055f0a5bf1771 in svr4_handle_solib_event () at /home/smarchi/src/wt/test/gdb/solib-svr4.c:1955
#3 0x000055f0a5c0ff92 in handle_solib_event () at /home/smarchi/src/wt/test/gdb/solib.c:1258
In the non-working case (without this patch), elf_locate_base returns
0, whereas in the working case (with this patch) it returns a valid
address, as we should expect.
This patch fixes this by making reread_symbols clear the
`section_offsets` vector, and re-create it by calling `sym_offsets`.
This is analogous to what syms_from_objfile_1 does. I didn't seem
absolutely necessary, but I also made it clear the various
`sect_index_*` fields, since their values no longer make sense (they
describe the old executable, and are indices in the now cleared
sections/section_offsets arrays).
I don't really like the approach taken by reread_symbols, trying to
reset everything manually on the objfile object, instead of, for
example, creating a new one from scratch. But I don't know enough yet
to propose a better solution.
One more reason I think this patch is needed is that the number of
sections of the new executable could be different from the number of
sections of the old executable. So if we don't re-create the
section_offsets array, not only we'll have wrong offsets, but we could
make accesses past the array.
Something else that silently fails (but doesn't seem to have
consequences) is the prologue analysis when we try to create the
breakpoint on `main`. Since the `main` symbol has the wrong value
0x555555555129, we try to access memory in that area, which fails. This
can be observed by debugging gdb and using `catch throw`. Before the
process is started, we need to access the memory at its unrelocated
address, 0x1129, which will read memory from the ELF file. This is now
what happens, with this patch applied.
It silently fails, probably because commit 46a62268b, "Catch exceptions
thrown from gdbarch_skip_prologue", papered over the problem and added
an empty catch clause. I'm quite sure that the root cause then was the
one fixed by this patch.
This fixes tests gdb.ada/exec_changed.exp and gdb.base/reread.exp for
me.
gdb/ChangeLog:
* symfile.c (reread_symbols): Clear objfile's section_offsets
vector and section indices, re-compute them by calling
sym_offsets.
|
|
extensions and CSR
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
|
|
Fixup a few spots in the testsuite that use mmap to consistently check
the return value against MAP_FAILED.
One spot in gdb.base/coredump-filter.c checked against NULL, that is
wrong. The other spots either didn't check, or checked against -1.
MAP_FAILED has the value -1, at least on Linux, but it's better to check
against the documented define.
gdb/testsuite/ChangeLog:
PR gdb/26016
* gdb.base/coredump-filter.c (do_mmap): Check mmap ret val
against MAP_FAILED.
* gdb.base/coremaker.c (mmapdata): Likewise.
* gdb.base/jit-reader-host.c (main): Likewise.
* gdb.base/sym-file-loader.c (load): Likewise.
(load_shlib): Likewise.
|
|
Newer versions of GCC can statically initialize an array in the
array_char_idx.exp test case. This leads to a spurious failure. This
patch fixes the problem by having the test case recognize both
possible results.
I'm checking this in.
gdb/testsuite/ChangeLog
2020-05-20 Tom Tromey <tromey@adacore.com>
* gdb.ada/array_char_idx.exp: Recognize initialized array.
|
|
ada-lang.c has a "bound_name" static that is used when finding fields
in a structure in some cases. This patch removes it in favor of
computing the desired field name at runtime; this avoids an artificial
limit.
I'm checking this in. Tested on x86-64 Fedora 30, and also on the
internal AdaCore test suite.
gdb/ChangeLog
2020-05-20 Tom Tromey <tromey@adacore.com>
* ada-lang.c (bound_name, MAX_ADA_DIMENS): Remove.
(desc_one_bound, desc_index_type): Compute field name.
|
|
|
|
When running test-case gdb.base/with.exp with target board cc-with-gdb-index,
we have:
...
(gdb) PASS: gdb.base/with.exp: basics: show language
with language ada -- print g_s^M
'g_s' has unknown type; cast it to its declared type^M
(gdb) FAIL: gdb.base/with.exp: basics: with language ada -- print g_s
...
This is due to this bit in dw2_map_matching_symbols:
...
if (dwarf2_per_objfile->index_table != nullptr)
{
/* Ada currently doesn't support .gdb_index (see PR24713). We can get
here though if the current language is Ada for a non-Ada objfile
using GNU index. As Ada does not look for non-Ada symbols this
function should just return. */
return;
}
...
While the reasoning in the comment may be sound from language perspective, it
does introduce an inconsistency in gdb behaviour between:
- having a .gdb_index section, and
- having a .gdb_names section, or a partial symtab, or -readnow.
Fix the inconsistency by completing implementation of
dw2_map_matching_symbols.
Tested on x86_64-linux, both with native and target board
cc-with-debug-index.
gdb/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* dwarf2/read.c (dw2_map_matching_symbols): Handle .gdb_index.
gdb/testsuite/ChangeLog:
2020-05-20 Tom de Vries <tdevries@suse.de>
PR symtab/25833
* gdb.base/with-mf-inc.c: New test.
* gdb.base/with-mf-main.c: New test.
* gdb.base/with-mf.exp: New file.
|
|
ldmain.c:add_archive_element copies file name pointers from the bfd to
a lang_input_statement_type.
input->filename = abfd->filename;
input->local_sym_name = abfd->filename;
This results in stale pointers when twiddling the bfd filename in
places like the pe ld after_open. So don't free the bfd filename,
and make copies using bfd_alloc memory that won't result in small
memory leaks that annoy memory checkers.
PR 25993
bfd/
* archive.c (_bfd_get_elt_at_filepos): Don't strdup filename,
use bfd_set_filename.
* elfcode.h (_bfd_elf_bfd_from_remote_memory): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* opncls.c (bfd_fopen, bfd_openstreamr, bfd_openr_iovec, bfd_openw),
(bfd_create): Likewise.
(_bfd_delete_bfd): Don't free filename.
(bfd_set_filename): Copy filename param to bfd_alloc'd memory,
return pointer to the copy or NULL on alloc fail.
* vms-lib.c (_bfd_vms_lib_get_module): Free newname and test
result of bfd_set_filename.
* bfd-in2.h: Regenerate.
gdb/
* solib-darwin.c (darwin_bfd_open): Don't strdup pathname for
bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use std::string for name
passed to bfd_set_filename.
* symfile-mem.c (add_vsyscall_page): Likewise for string
passed to symbol_file_add_from_memory.
(symbol_file_add_from_memory): Make name param a const char* and
don't strdup.
ld/
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Don't copy
other_bfd_filename for bfd_set_filename, and test result of
bfd_set_filename call. Don't create a new is->filename, simply
copy from bfd filename. Free new_name after bfd_set_filename.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
|
|
|
|
opcodes/
* ppc-opc.c (insert_ls, extract_ls): Handle 3-bit L fields and new
WC values on POWER10 sync, dcbf and wait instructions.
(insert_pl, extract_pl): New functions.
(L2OPT, LS, WC): Use insert_ls and extract_ls.
(LS3): New , 3-bit L for sync.
(LS3, L3OPT): New, 3-bit L for sync and dcbf.
(SC2, PL): New, 2-bit SC and PL for sync and wait.
(XWCPL_MASK, XL3RT_MASK, XSYNCLS_MASK): New instruction masks.
(XOPL3, XWCPL, XSYNCLS): New opcode macros.
(powerpc_opcodes) <dcbflp, dcbfps, dcbstps pause_short, phwsync,
plwsync, stcisync, stncisync, stsync, waitrsv>: New extended mnemonics.
<wait>: Enable PL operand on POWER10.
<dcbf>: Enable L3OPT operand on POWER10.
<sync>: Enable SC2 operand on POWER10.
gas/
* testsuite/gas/ppc/power9.s <dcbf, dcbfl, dcbflp>: Add tests.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/power10.s <dcbf, dcbfps, dcbstps, hwsync, lwsync,
pause_short, phwsync, plwsync, ptesync, stcisync, stncisync, stsync,
sync, wait, waitrsv>: Add tests.
* testsuite/gas/ppc/power10.d: Likewise.
|
|
Check sizes early, before users of slurp_relocs allocate buffers for
the swapped in relocs.
PR 26011
* elf.c (_bfd_elf_get_reloc_upper_bound): Sanity check reloc
section size against file size.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
|
|
This patch makes gdb use the inline accessor for all bfd->filename
read accesses.
* coff-pe-read.c (read_pe_exported_syms): Use bfd_get_filename
rather than accessing bfd->filename directly.
* dtrace-probe.c (dtrace_static_probe_ops::get_probes): Likewise,
and use bfd_section_name.
* dwarf2/frame.c (decode_frame_entry): Likewise.
* exec.c (exec_set_section_address): Likewise.
* solib-aix.c (solib_aix_bfd_open): Likewise.
* stap-probe.c (get_stap_base_address): Likewise.
* symfile.c (reread_symbols): Likewise.
|
|
An earlier patch inadvertently broke a Rust test. This restores it.
gdb/testsuite/ChangeLog
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Restore missing test result.
|
|
Fix intial -> initial typo.
gdb/testsuite/ChangeLog:
2020-05-19 Tom de Vries <tdevries@suse.de>
* gdb.base/gdb-caching-proc.exp: Fix typo.
|
|
gdb.rust complains about some duplicate test names. This patch fixes
this in a straightforward way.
2020-05-19 Tom Tromey <tromey@adacore.com>
* gdb.rust/simple.exp: Add some test descriptions.
(test_one_slice): Use with_test_prefix.
|
|
An earlier patch changed target_fileio_open, but missed a caller.
This patch fixes it.
2020-05-19 Tom Tromey <tromey@adacore.com>
* sparc64-tdep.c (adi_tag_fd): Update call to target_fileio_open.
|
|
Found by inspection, so I don't have a test for it (I don't think it
would be easy to have this bug cause a failure reliably).
We allocate space for N fields into `new_fields`, then memcpy N fields
at `new_fields + 1`. This overflows the allocated buffer by one field.
Fix it by allocating `N + 1` fields.
gdb/ChangeLog:
* dwarf2/read.c (quirk_rust_enum): Allocate enough fields.
|
|
The patch makes GDB do exec-file-mismatch validation by comparing
build IDs instead of the current method of comparing filenames.
Currently, the exec-file-mismatch feature simply compares filenames to
decide whether the exec file loaded in gdb and the exec file the
target reports is running match. This causes false positives when
remote debugging, because it'll often be the case that the paths in
the host and the target won't match. And of course misses the case of
the files having the same name but being actually different files
(e.g., different builds).
This also broke many testcases when running against gdbserver, causing
tests to be skipped like (here native-extended-gdbserver):
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n) UNTESTED: gdb.base/argv0-symlink.exp: could not run to main
or to fail like (here native-gdbserver):
(gdb) spawn /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2346 /home/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
Process /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x created; pid = 20040
Listening on port 2346
target remote localhost:2346
Remote debugging using localhost:2346
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/temp/19968/skip_btrace_tests-19968.x
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x"? (y or n) Quit
(gdb) UNSUPPORTED: gdb.btrace/buffer-size.exp: target does not support record-btrace
The former case is about GDB not realizing the two files are the same,
because one of the them is a symlink to the other. The latter case is
about GDB realizing that one file is a copy of the other.
Over the years, the toolchain has settled on build ID matching being
the canonical method to match core dumps to executables, and
executables with no debug info to their debug info.
This patch makes us use build IDs to match the running image of a
binary with its version loaded in gdb, which may or may not have debug
info. This is very much like the core dump/executable matching.
The change to gdb_bfd_open is necessary to get rid of the "transfers
from remote targets can be slow" warning when we open the remote file
to read its build ID:
(gdb) r
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
Reading /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n)
While trying this out, I was worried that bfd would read a lot of
stuff from the binary in order to extract the build ID, making it
potentially slow, but turns out we don't read all that much. Maybe a
couple hundred bytes, and most of it seemingly is the read-ahead
cache. So I'm not worried about that. Otherwise I'd consider whether
a new qXfer:buildid:read would be better. But I'm happy that we
seemingly don't need to worry about it.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* NEWS (set exec-file-mismatch): Adjust entry.
* exec.c: Include "build-id.h".
(validate_exec_file): Try to match build IDs instead of filenames.
* gdb_bfd.c (struct gdb_bfd_open_closure): New.
(gdb_bfd_iovec_fileio_open): Adjust to use gdb_bfd_open_closure
and pass down 'warn_if_slow'.
(gdb_bfd_open): Add 'warn_if_slow' parameter. Use
gdb_bfd_open_closure to pass it down.
* gdb_bfd.h (gdb_bfd_open): Add 'warn_if_slow' parameter.
gdb/doc/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Attach): Update exec-file-mismatch description to
mention build IDs.
(Separate Debug Files): Add "build id" anchor.
|
|
This basically makes target_fileio_open_1 extern, renamed to
target_fileio_open, and eliminates the current
target_fileio_open_warn_if_slow and target_fileio_open.
A following parameter will want to change gdb_bfd_iovec_fileio_open,
the only caller of target_fileio_open_warn_if_slow, to pass down
"warn_if_slow" true/false from the caller, instead of hardcoding
"warn_if_slow" true.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Adjust.
* target.c (target_fileio_open_1): Rename to target_fileio_open
and make extern. Use bool.
(target_fileio_open, target_fileio_open_warn_if_slow): Delete.
(target_fileio_read_alloc_1): Adjust.
* target.h (target_fileio_open): Add 'warn_if_slow' parameter.
(target_fileio_open_warn_if_slow): Delete declaration.
|
|
A following patch will add one more defaulted parameter.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb_bfd.h: (gdb_bfd_open): Default to 'fd' parameter to -1.
Adjust all callers.
|
|
Compiling with clang 11 gives us:
CXX h8300-tdep.o
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:225:21: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:203:17: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
/home/smarchi/src/binutils-gdb/gdb/h8300-tdep.c:184:17: error: overlapping comparisons always evaluate to false [-Werror,-Wtautological-overlap-compare]
if (disp < 0 && disp > 0xffffff)
~~~~~~~~~^~~~~~~~~~~~~~~~~~
Indeed, disp (of type LONGEST) can't be less than 0 and greater than
0xffffff.
Fix it by changing the way we check if disp is negative. Check the sign
bit of disp, which is a 24-bit number.
gdb/ChangeLog:
* h8300-tdep.c (h8300_is_argument_spill): Change how we check
whether disp is negative.
|
|
PR 26005
* elf.c (bfd_section_from_shdr): Replace bfd_malloc + memset with
bfd_zmalloc to allocate memory for the sections_being_created array.
|
|
Change the symfile_segment_data::segment_info array to be an
std::vector. No functional changes are expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data)
<~symfile_segment_data>: Remove.
<segment_info>: Change to std::vector.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
|
|
Instead of maintaining two vectors, I added a small `segment` class
which holds both the base address and size of one segment and replaced
the two `segment_bases` and `segment_sizes` arrays with a single vector.
The rest of the changes are straightforward, no behavior changes are
expected.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data) <struct segment>: New.
<segments>: New.
<segment_bases, segment_sizes>: Remove.
* symfile.c (default_symfile_segments): Update.
* elfread.c (elf_symfile_segments): Update.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
|
|
- Allocate this structure with new instead of XNEW, use a unique pointer
to manage its lifetime.
- Change a few functions to return a unique pointer instead of a
plain pointer.
- Change free_symfile_segment_data to be symfile_segment_data's
destructor.
gdb/ChangeLog:
* symfile.h (struct symfile_segment_data): Initialize fields.
<~symfile_segment_data>: Add.
(symfile_segment_data_up): New.
(struct sym_fns) <sym_segments>: Return a
symfile_segment_data_up.
(default_symfile_segments): Return a symfile_segment_data_up.
(free_symfile_segment_data): Remove.
(get_symfile_segment_data): Return a symfile_segment_data_up.
* symfile.c (default_symfile_segments): Likewise.
(get_symfile_segment_data): Likewise.
(free_symfile_segment_data): Remove.
(symfile_find_segment_sections): Update.
* elfread.c (elf_symfile_segments): Return a
symfile_segment_data_up.
* remote.c (remote_target::get_offsets): Update.
* solib-target.c (solib_target_relocate_section_addresses):
Update.
* symfile-debug.c (debug_sym_segments): Return a
symfile_segment_data_up.
|
|
discrepancies between the dynamic tags and the dynamic sections.
PR binutils/25809
* readelf.c (process_program_headers): Warn if the PT_DYNAMIC
segment doesn't match the .dynamic section and checks are
enabled.
(struct filedata): Add dynamic_symtab_section and
dynamic_strtab_section fields.
(process_section_headers): Set dynamic_symtab_section to the
.dynsym section. Set dynamic_strtab_section to the .dynstr
section.
(process_dynamic_section): Warn if the .dynsym section doesn't
match DT_SYMTAB and DT_SYMENT or the .dynstr section doesn't
DT_STRTAB and DT_STRSZ. But only if checks are enabled.
|
|
or1k: Fix static linking when with .rela.got relocations
or1k: Fix dynamic TLS symbol flag
or1k: Add TLS mask to handle multiple model access
or1k: Fix issue with multiple PCREL relocations
or1k: TLS offset to use tcb size and section alignment
or1k: refactor: Rename p to sec_relocs
or1k: refactor: Rename s to sgot and splt
or1k: Add dynamic flag to tpoff
bfd * elf32-or1k.c (or1k_elf_finish_dynamic_symbol): Rename srela
to relgot.
(or1k_elf_relocate_section): Access srelgot via
htab->root.srelgot. Add assertions for srelgot->contents.
Introduce local variable for srelgot to not reuse global
sreloc.
(or1k_elf_relocate_section): Fixup dynamic symbol detection.
(or1k_set_got_and_rela_sizes): New function.
(or1k_initial_exec_offset): New function.
(TLS_GD, TLS_IE, TLS_LD, TLS_LE): Redefine macros as masks.
(or1k_elf_relocate_section): Allow for TLS to handle multiple
model access.
(or1k_elf_check_relocs): Use OR to set TLS access.
(allocate_dynrelocs): Use or1k_set_got_and_rela_sizes to set
sizes.
(or1k_elf_size_dynamic_sections): Use
or1k_set_got_and_rela_sizes to set sizes.
(or1k_elf_relocate_section): Fixup PCREL relocation calculation.
(TCB_SIZE): New macro.
(tpoff): Use TCB_SIZE and alignment to calculate offset.
(allocate_dynrelocs, readonly_dynrelocs, or1k_elf_check_relocs)
(or1k_elf_size_dynamic_sections): Rename p to sec_relocs.
(allocate_dynrelocs): Rename s to splt or sgot based on usage.
(tpoff): Add dynamic boolean argument.
(or1k_elf_relocate_section): Pass dynamic flag to tpoff.
|
|
PR 25992
gas * config/tc-arm.c : Add arm_ext_v8r feature.
(it_fsm_post_encode): Check arm_ext_v8r feature.
(get_aeabi_cpu_arch_from_fset): Check arm_ext_v8r feature.
include * opcode/arm.h (ARM_EXT2_V8R): Define. Modified ARM_AEXT2_V8R.
|
|
opcodes/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
PR 25184
* or1k-asm.c: Regenerate.
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-dis.c: Regenerate.
* or1k-ibld.c: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
|
|
Reported by Rich Felker when building on 32-bit hosts. Backwards jump
negative offsets were not calculated correctly due to improper 32-bit
to 64-bit zero-extension. The 64-bit fields are present because we
are mixing 32-bit and 64-bit architectures in our cpu descriptions.
Removing 64-bit fixes the issue. We don't use 64-bit, there is an architecture
spec for 64-bit but no implementations or simulators. My thought is if
we need them in the future we should do the proper work to support both
32-bit and 64-bit implementations co-existing then.
cpu/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
PR 25184
* or1k.cpu (arch or1k): Remove or64 and or64nd machs.
(ORBIS-MACHS, ORFPX32-MACHS): Remove pmacros.
(cpu or1k64bf, mach or64, mach or64nd): Remove definitions.
* or1kcommon.cpu (h-fdr): Remove hardware.
* or1korfpx.cpu (rDDF, rADF, rBDF): Remove operand definitions.
(float-regreg-insn): Remove lf- mnemonic -d instruction pattern.
(float-setflag-insn-base): Remove lf-sf mnemonic -d pattern.
(float-cust-insn): Remove "lf-cust" cust-num "-d" pattern.
(lf-rem-d, lf-itof-d, lf-ftoi-d, lf-madd-d): Remove.
|
|
The linker silently writes out a conditional branch to 0 if the
target symbol in R_AARCH64_CONDBR19 or R_AARCH64_TSTBR14 relocations is
undefined. Emit a PLT instead so that behaviour is the same for these
relocations as the llvm linker.
The special behaviour for undefined weak symbols, where conditional
branches to such symbols result in a branch unto themselves, has been
retained. This is because the weak-undefined.s test explicitly checks
for that, leading me to conclude that it's expected behaviour.
bfd * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Club
BFD_RELOC_AARCH64_BRANCH19 and BFD_RELOC_AARCH64_TSTBR14
cases with BFD_RELOC_AARCH64_JUMP26.
(elfNN_aarch64_check_relocs): Likewise.
ld * testsuite/ld-aarch64/aarch64-elf.exp: New test
emit-relocs-560.
* testsuite/ld-aarch64/emit-relocs-560.d: New file.
* testsuite/ld-aarch64/emit-relocs-560.s: New file.
|
|
* emultempl/beos.em (sort_by_file_name): Use bfd_get_filename
rather than accessing bfd->filename directly.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Likewise.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
* emultempl/spuelf.em (embedded_spu_file): Likewise.
* ldlang.c (input_statement_is_archive_path, wild_sort),
(check_excluded_libs): Likewise.
* ldmain.c (add_archive_element): Likewise.
* ldmisc.c (vfinfo): Likewise.
* pe-dll.c (auto_export, generate_edata, pe_create_import_fixup),
(pe_dll_generate_implib, pe_process_import_defs): Likewise.
* plugin.c (plugin_object_p): Likewise.
|
|
* write.c (write_contents): Use bfd_get_filename rather than
accessing bfd->filename directly. Use bfd_section_name rather
than accessing section->name directly.
|
