| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
While trying to build gdb on latest openSUSE Tumbleweed, I noticed the
following warning,
checking for makeinfo... makeinfo --split-size=5000000
configure: WARNING:
*** Makeinfo is too old. Info documentation will not be built.
then I checked the version of makeinfo, it said,
======
$ makeinfo --version
texi2any (GNU texinfo) 7.0.1
Copyright (C) 2022 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
======
After digging a little bit, it became quite obvious that a dot is
missing in regexp that makes it impossible to match versions higher than
7.0, and here's the solution:
- | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]\.[0-9])' >/dev/null 2>&1; then
However, Eli pointed out that the solution above has another problem: it
will stop working when Texinfo 10.1 will be released. Meanwhile, he
suggested to solve this problem permanently. That is, we don't care
about the minor version for Texinfo > 6.9, we only care about the major
version.
In this way, the problem will be resolved permanently, thanks to Eli.
libctf/ChangeLog:
* configure: Regenerated.
* configure.ac: Update regexp to match versions higher than 7.0.
|
|
"foo" is at 0x2010. This corrects the expected output for .long and
.word referencing foo, showing a problem with relocation handling.
* testsuite/ld-pe/aarch64.d: Correct expected output.
|
|
* expr.c (seen, nr_seen): Make file scope.
(expr_begin): Clear seen, nr_seen, and expr_symbol_lines.
(expr_end): New function.
* expr.h (expr_end): Declare.
* output-file.c (output_file_close): Call expr_end.
* config/tc-hppa.c (expr_end): Rename to expr_parse_end.
* config/tc-mips.c: Likewise.
* config/tc-riscv.c: Likewise.
* config/tc-sparc.c: Likewise.
|
|
* reloc.c (bfd_perform_relocation, bfd_install_relocation): Remove
i960-coff target hack.
|
|
Old COFF (and AOUT) targets have unusual relocation addends.
* coffcode.h (<Reading relocations>): Describe COFF addends.
|
|
PR 29991
* config/tc-mips.c (s_align): Call file_mips_check_options and
mips_mark_labels.
* testsuite/gas/mips/align-after-label.s,
* testsuite/gas/mips/mips-align-after-label.d,
* testsuite/gas/mips/micromips-align-after-label.d: New test.
* testsuite/gas/mips/mips.exp: Run it.
|
|
|
|
|
|
We have many uses of sys/stat.h that are unprotected by HAVE_SYS_STAT_H,
so this is more formalizing the reality that we require this header.
Since we switched to gnulib, it guarantees that a sys/stat.h exists
for us to include, so we're doubly OK.
|
|
We have many uses of unistd.h that are unprotected by HAVE_UNISTD_H,
so this is more formalizing the reality that we require this header.
Since we switched to gnulib, it guarantees that a unistd.h exists
for us to include, so we're doubly OK.
|
|
This logic was added in order to expose the strsignal prototype for
nrun.c. Since then, we've migrated to gnulib as our portability layer,
and it takes care of probing system extensions for us, so there's no
need to duplicate the work.
|
|
Add explicit arch-specific modules.c rules to keep the build from
generating an incorrect common/modules.c. Otherwise the pattern
rules would cascade such that it'd look for $arch/modules.o which
turned into common/modules.c which triggered the gen rule.
My local testing of this code didn't catch this bug because of how
Automake manages .Po (dependency files) in incremental builds -- it
was adding extra rules that override the pattern rules which caused
the build to generate correct modules.c files. But when building
from a cold cache, the pattern rules would force common/modules.c to
be used leading to crashes at runtime.
|
|
|
|
signal.h isn't needed in microblaze and mn10300 interp.c
so don't include it.
|
|
Copying & pasting the first rule missed updating the dep to the right
stamp file.
|
|
Now that all ports (that use igen) build in the top-level and depend
on igen, we can move the conditional logic out of configure. We also
switch from noinst_LIBRARIES to EXTRA_LIBRARIES so that the library
is only built when needed (i.e. the igen tool is used).
|
|
Now that all the ports compile some C files in their arch dirs, Automake
guarantees creating the depdir for us, so we can drop our configure hack.
|
|
Now that all ports (other than ppc) build in the top-level, we don't
need to expand all the modules.c targets as a recursive dep. Each
port depends on their respective file now, and the ppc port doesn't
use it at all.
|
|
This makes sure the arch-specific modules.c wildcard is matched and
not the common/%.c so that we compile it correctly. It also makes
sure each subdir has depdir logic enabled.
|
|
Rather than force this to be built ahead of time for all targets,
move the dep to the ppc code since it's the only user of it now.
|
|
Now that we build these objects in the top dir & generate modules.c
there, we don't need to generate them all first -- we can let the
normal dependency graph take care of building things in parallel.
|
|
This simplifies the build logic and avoids an Automake bug where the
common_libcommon_a_OBJECTS variable isn't set in the arch libsim.a
DEPENDENCIES for targets that, alphabetically, come before "common".
We aren't affected by that bug with the current code, but as we move
things out of SIM_ALL_RECURSIVE_DEPS and rely on finer dependencies,
we will trip over it.
|
|
Now that all ports (other than ppc) build in the top-level, we don't
need to mark the igen tool as a recursive dep. Each port depends on
the tool if it actually uses it, and ppc doesn't use it at all.
|
|
Now that all ports (other than ppc) build in the top-level, we don't
need to expand all the hw-config.h targets as a recursive dep. Each
port depends on their respective header now, and the ppc port doesn't
use it at all.
|
|
We don't have any recursive builds anymore, so we can drop this logic.
|
|
|
|
The test suite uses the --configuration flag to feature-test gdb.
However, when I added this, I neglected to pass the internal gdbflags
to this, causing an error, which then caused failures in the test
suite (which would not be seen if you'd ever run "make install").
This patch fixes the bug. Tested by removing my install tree first,
to verify that I could reproduce the failure.
|
|
|
|
|
|
Now that all (other than ppc) build in the top-level, this logic is
unused, so punt it all.
|
|
This changes skip_tui_tests to invert the sense, and renames it to
allow_tui_tests. It also rewrites this function to use the output of
"gdb --configuration", and it adds a note about the state of the TUI
to that output.
|
|
This changes skip_guile_tests to invert the sense, and renames it to
allow_guile_tests. It also rewrites this proc to check the output of
"gdb --configuration", as was done for Python. Then it changes the
code to use "require" where possible.
|
|
This changes skip_hw_breakpoint_tests to invert the sense, and renames
it to allow_hw_breakpoint_tests. This also converts some tests to use
"require" -- I missed this particular check in the first series.
|
|
This changes skip_tsx_tests to invert the sense, and renames it to
allow_tsx_tests.
|
|
This changes skip_shlib_tests to invert the sense, and renames it to
allow_shlib_tests.
|
|
This changes skip_rust_tests to invert the sense, and renames it to
allow_rust_tests.
|
|
This changes skip_python_tests to invert the sense, and renames it to
allow_python_tests.
|
|
This changes skip_perf_tests to invert the sense, and renames it to
allow_perf_tests.
|
|
This changes skip_opencl_tests to invert the sense, and renames it to
allow_opencl_tests.
|
|
This changes skip_ifunc_tests to invert the sense, and renames it to
allow_ifunc_tests.
|
|
This changes skip_hw_watchpoint_tests to invert the sense, and renames
it to allow_hw_watchpoint_tests.
|
|
This changes skip_hw_watchpoint_multi_tests to invert the sense, and
renames it to allow_hw_watchpoint_multi_tests.
|
|
This changes skip_hw_watchpoint_access_tests to invert the sense, and
renames it to allow_hw_watchpoint_access_tests.
|
|
This changes skip_go_tests to invert the sense, and renames it to
allow_go_tests.
|
|
This changes skip_gdbserver_tests to invert the sense, and renames it
to allow_gdbserver_tests.
|
|
This changes skip_fortran_tests to invert the sense, and renames it to
allow_fortran_tests.
|
|
This changes skip_d_tests to invert the sense, and renames it to
allow_d_tests.
|
|
This changes skip_dlmopen_tests to invert the sense, and renames it to
allow_dlmopen_tests.
|
|
This changes skip_debuginfod_tests to invert the sense, and renames it
to allow_debuginfod_tests.
|
