| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The recent DWARF indexer rewrite introduced a regression when debugging
a forking program.
Here is a way to reproduce the issue (there might be other ways, but one
is enough and this one mimics the situation we encountered). Consider a
program which forks, and the child loads a shared library and calls a
function in this shared library:
if (fork () == 0)
{
void *solib = dlopen (some_solib, RTLD_NOW);
void (*foo) () = dlsym (some_solib, "foo");
foo ();
}
Suppose that this program is compiled without debug info, but the shared
library it loads has debug info enabled.
When debugging such program with the following options:
- set detach-on-fork off
- set follow-fork-mode child
we see something like:
(gdb) b foo
Function "foo" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (foo) pending.
(gdb) run
Starting program: a.out
[Attaching after process 19720 fork to child process 19723]
[New inferior 2 (process 19723)]
[Switching to process 19723]
Thread 2.1 "a.out" hit Breakpoint 1, 0x00007ffff7fc3101 in foo () from .../libfoo.so
(gdb) list
Fatal signal: Segmentation fault
----- Backtrace -----
0x55a278f77d76 gdb_internal_backtrace_1
../../gdb/bt-utils.c:122
0x55a278f77f83 _Z22gdb_internal_backtracev
../../gdb/bt-utils.c:168
0x55a27940b83b handle_fatal_signal
../../gdb/event-top.c:914
0x55a27940bbb1 handle_sigsegv
../../gdb/event-top.c:987
0x7effec0343bf ???
/build/glibc-sMfBJT/glibc-2.31/nptl/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0
0x55a27924c9d3 _ZNKSt15__uniq_ptr_implI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE6_M_ptrEv
/usr/include/c++/9/bits/unique_ptr.h:154
0x55a279248bc9 _ZNKSt10unique_ptrI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE3getEv
/usr/include/c++/9/bits/unique_ptr.h:361
0x55a2792ae718 _ZN27dwarf2_base_index_functions23find_last_source_symtabEP7objfile
../../gdb/dwarf2/read.c:3164
0x55a279afb93e _ZN7objfile23find_last_source_symtabEv
../../gdb/symfile-debug.c:139
0x55a279aa3040 _Z20select_source_symtabP6symtab
../../gdb/source.c:365
0x55a279aa22a1 _Z34set_default_source_symtab_and_linev
../../gdb/source.c:268
0x55a27903c44c list_command
../../gdb/cli/cli-cmds.c:1185
0x55a279051233 do_simple_func
../../gdb/cli/cli-decode.c:95
0x55a27905f221 _Z8cmd_funcP16cmd_list_elementPKci
../../gdb/cli/cli-decode.c:2514
0x55a279c3b0ba _Z15execute_commandPKci
../../gdb/top.c:660
0x55a27940a6c3 _Z15command_handlerPKc
../../gdb/event-top.c:598
0x55a27940b032 _Z20command_line_handlerOSt10unique_ptrIcN3gdb13xfree_deleterIcEEE
../../gdb/event-top.c:797
0x55a279caf401 tui_command_line_handler
../../gdb/tui/tui-interp.c:278
0x55a279409098 gdb_rl_callback_handler
../../gdb/event-top.c:230
0x55a279ed5df2 rl_callback_read_char
../../../readline/readline/callback.c:281
0x55a279408bd8 gdb_rl_callback_read_char_wrapper_noexcept
../../gdb/event-top.c:188
0x55a279408de7 gdb_rl_callback_read_char_wrapper
../../gdb/event-top.c:205
0x55a27940a061 _Z19stdin_event_handleriPv
../../gdb/event-top.c:525
0x55a27a23771e handle_file_event
../../gdbsupport/event-loop.cc:574
0x55a27a237f5f gdb_wait_for_event
../../gdbsupport/event-loop.cc:700
0x55a27a235d81 _Z16gdb_do_one_eventv
../../gdbsupport/event-loop.cc:237
0x55a2796c2ef0 start_event_loop
../../gdb/main.c:418
0x55a2796c3217 captured_command_loop
../../gdb/main.c:478
0x55a2796c717b captured_main
../../gdb/main.c:1340
0x55a2796c7217 _Z8gdb_mainP18captured_main_args
../../gdb/main.c:1355
0x55a278d0b381 main
../../gdb/gdb.c:32
---------------------
A fatal error internal to GDB has been detected, further
debugging is not possible. GDB will now terminate.
This is a bug, please report it. For instructions, see:
<https://www.gnu.org/software/gdb/bugs/>.
The first issue observed is in the message printed when hitting the
breakpoint. It says that there was a break in the .so file as if there
was no debug info associated with it, but there is. Later, if we try to
display the source where the execution stopped, we have a segfault.
Note that not having the debug info on the main binary is not strictly
required to encounter some issues, it only is to encounter the segfault.
If the main binary has debug information, GDB shows some source form the
main binary, unrelated to where we stopped.
The core of the issue is that GDB never loads the psymtab for the
library. It is not loaded when we first see the .so because in case of
detach-on-fork off, follow-fork-mode child, infrun.c sets
child_inf->symfile_flags = SYMFILE_NO_READ to delay the psymtab loading
as much as possible. If we compare to what was done to handle this
before the new indexer was activated, the psymatb construction for the
shared library was done under
psymbol_functions::expand_symtabs_matching:
bool
psymbol_functions::expand_symtabs_matching (...)
{
for (partial_symtab *ps : require_partial_symbols (objfile))
...
}
The new indexer's expand_symtabs_matching callback does not have a call
to the objfile's require_partial_symbols, so if the partial symbol table
is not loaded at this point, there is no mechanism to fix this.
Instead of requiring each implementation of the quick_functions to check
that partial symbols have been read, I think it is safer to enforce this
when calling the quick functions. The general pattern for calling the
quick functions is:
for (auto *iter : qf)
iter->the_actual_method_call (...)
This patch proposes to wrap the access of the `qf` field with an accessor
which ensures that partial symbols have been read before iterating:
qf_require_partial_symbols. All calls to quick functions are updated
except:
- quick_functions::dump
- quick_functions::read_partial_symbols (from
objfile::require_partial_symbols)
- quick_functions::can_lazily_read_symbols and quick_functions::has_symbols
(from objfile::has_partial_symbols)
Regression tested on x86_64-gnu-linux.
Change-Id: I39a13a937fdbaae613a5cf68864b021000554546
|
|
PR gdb/29128 points out a crash in the new DWARF index code. This
happens if the aranges for a CU claims a PC, but the symtab that is
created during CU expansion does not actually contain the PC. This
can only occur due to bad debuginfo, but at the same time, gdb should
not crash.
This patch fixes the bug and further merges some code into
dwarf2_base_index_functions. This merger helps prevent the same issue
from arising from the other index implementations.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29128
|
|
After DWARF has been scanned, the cooked index code does a
"finalization" step in a worker thread. This step combines all the
index entries into a single master list, canonicalizes C++ names, and
splits Ada names to synthesize package names.
While this step is run in the background, gdb will wait for the
results in some situations, and it turns out that this step can be
slow. This is PR symtab/29105.
This can be sped up by parallelizing, at a small memory cost. Now
each index is finalized on its own, in a worker thread. The cost
comes from name canonicalization: if a given non-canonical name is
referred to by multiple indices, there will be N canonical copies (one
per index) rather than just one.
This requires changing the users of the index to iterate over multiple
results. However, this is easily done by introducing a new "chained
range" class.
When run on gdb itself, the memory cost seems rather low -- on my
current machine, "maint space 1" reports no change due to the patch.
For performance testing, using "maint time 1" and "file" will not show
correct results. That approach measures "time to next prompt", but
because the patch only affects background work, this shouldn't (and
doesn't) change. Instead, a simple way to make gdb wait for the
results is to set a breakpoint.
Before:
$ /bin/time -f%e ~/gdb/install/bin/gdb -nx -q -batch \
-ex 'break main' /tmp/gdb
Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28.
2.00
After:
$ /bin/time -f%e ./gdb/gdb -nx -q -batch \
-ex 'break main' /tmp/gdb
Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28.
0.65
Regression tested on x86-64 Fedora 34.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105
|
|
Copy initialisation over from the elf.em before_parse. Commit
ba951afb999 2022-05-03 changed behaviour on arm and score regarding
exec stack. This patch restores the previous behaviour.
* emultempl/aarch64elf.em (before_parse): Init separate_code,
warn_execstack, no_warn_rwx_segments and default_execstack.
* emultempl/armelf.em (before_parse): Likewise.
* emultempl/scoreelf.em (before_parse): Likewise.
* testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Return
true for arm and nacl.
|
|
Whilst reviewing Luis' proposed change to s_arm_unwind_save_mixed
yesterday I noticed that we were making use of __builting_clzl
directly within the main function, which is not guaranteed to be
portable. Whilst studying the code further, I also realized that it
could be rewritten without using it and also reworked to remove a lot
of unnecessary iterations steps. So this patch does that (and also
removes the source of the warning that Luis was trying to fix).
Finally, with the rewrite we can also simplify the caller of this
routine as the new version can handle all the cases directly.
* config/tc-arm.c (s_arm_unwind_save_mixed): Rewrite without
using __builtin_clzl.
(s_arm_unwind_save): Simplify logic for simple/mixed register saves.
|
|
When accessing /proc/PID/mem, if pread64/pwrite64/read/write encounters
an error and return -1, linux_proc_xfer_memory_partial return
TARGET_XFER_EOF.
I think it should return TARGET_XFER_E_IO in this case. TARGET_XFER_EOF
is returned when pread64/pwrite64/read/frite returns 0, which indicates
that the address space is gone and the whole process has exited or
execed.
This patch makes this change.
Regression tested on x86_64-linux-gnu.
Change-Id: I6030412459663b8d7933483fdda22a6c2c5d7221
|
|
Since ed01945057c "Make gdb_test's question non-optional if specified",
if the question and response parameters are given to gdb_test, the
framework enforces that GDB asks the question. Before this patch, tests
needed to use gdb_test_multiple to enforce this.
This patch updates the gdb.dwarf2/calling-convention.exp testcase to use
gdb_test to check that GDB asks a question. This replaces the more
complicated gdb_test_multiple based implementation.
Tested on x86_64-gnu-linux.
Change-Id: I7216e822ca68f2727e0450970097d74c27c432fe
|
|
|
|
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
|
|
|
|
Testsuite files belonging to commit 3ac9da49378c.
|
|
Currently, breakpoint locations that are enabled while their parent
breakpoint is disabled are displayed with "y" in the Enb colum of
"info breakpoints":
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep n <MULTIPLE>
1.1 y 0x00000000000011b6 in ...
1.2 y 0x00000000000011c2 in ...
1.3 n 0x00000000000011ce in ...
Such locations won't trigger a break, so to avoid confusion, show "y-"
instead. For example:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep n <MULTIPLE>
1.1 y- 0x00000000000011b6 in ...
1.2 y- 0x00000000000011c2 in ...
1.3 n 0x00000000000011ce in ...
The "-" sign is inspired on how the TUI represents breakpoints on the
left side of the source window, with "b-" for a disabled breakpoint.
Change-Id: I9952313743c51bf21b4b380c72360ef7d4396a09
|
|
|
|
The previous patch to add -prompt/-lbl to gdb_test introduced a
regression: Before, you could specify an explicit empty message to
indicate you didn't want to PASS, like so:
gdb_test COMMAND PATTERN ""
After said patch, gdb_test no longer distinguishes
no-message-specified vs empty-message, so tests that previously would
be silent on PASS, now started emitting PASS messages based on
COMMAND. This in turn introduced a number of PATH/DUPLICATE
violations in the testsuite.
This commit fixes all the regressions I could see.
This patch uses the new -nopass feature introduced in the previous
commit, but tries to avoid it if possible. Most of the patch fixes
DUPLICATE issues the usual way, of using with_test_prefix or explicit
unique messages.
See previous commit's log for more info.
In addition to looking for DUPLICATEs, I also looked for cases where
we would now end up with an empty message in gdb.sum, due to a
gdb_test being passed both no message and empty command. E.g., this
in gdb.ada/bp_reset.exp:
gdb_run_cmd
gdb_test "" "Breakpoint $decimal, foo\\.nested_sub \\(\\).*"
was resulting in this in gdb.sum:
PASS: gdb.ada/bp_reset.exp:
I fixed such cases by passing an explicit message. We may want to
make such cases error out.
Tested on x86_64 GNU/Linux, native and native-extended-gdbserver. I
see zero PATH cases now. I get zero DUPLICATEs with native testing
now. I still see some DUPLICATEs with native-extended-gdbserver, but
those were preexisting, unrelated to the gdb_test change.
Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2
|
|
The previous patch to add -prompt/-lbl to gdb_test introduced a
regression: Before, you could specify an explicit empty message to
indicate you didn't want to PASS, like so:
gdb_test COMMAND PATTERN ""
After said patch, gdb_test no longer distinguishes
no-message-specified vs empty-message, so tests that previously would
be silent on PASS, now started emitting PASS messages based on
COMMAND. This in turn introduced a number of PATH/DUPLICATE
violations in the testsuite.
I think that not issuing a PASS should be restricted to only a few
cases -- namely in shared routines exported by gdb.exp, which happen
to use gdb_test internally. In tests that iterate an unknown number
of tests exercising some racy scenario. In the latter case, if we
emit PASSes for each iteration, we run into the situation where
different testsuite runs emit a different number of PASSes.
Thus, this patch preserves the current behavior, and, instead, adds a
new "-nopass" option to gdb_test and gdb_test_no_output. Compared to
the old way of supressing PASS with an empty message, this has the
advantage that you can specify a FAIL message that is distinct from
the command string, and, it's also more explicit.
Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2
|
|
This commit makes RV32 + 'Q' extension (version 2.2 or later) not
conflicting since this combination is no longer prohibited by the
specification.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): Remove conflict
detection that prohibits RV32Q on 'Q' version 2.2 or later.
gas/ChangeLog:
* testsuite/gas/riscv/march-fail-rv32iq.d: Removed.
* testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq2p0.d: New test
showing RV32IQ fails on 'Q' extension version 2.0.
* testsuite/gas/riscv/march-fail-rv32iq2p0.l: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq2.d: Likewise.
* testsuite/gas/riscv/march-fail-rv32iq-isa-2p2.d: New test
showing RV32IQ fails on ISA specification version 2.2.
* testsuite/gas/riscv/march-ok-rv32iq2p2.d: New test
showing RV32IQ succesds on 'Q' extension version 2.2.
* testsuite/gas/riscv/march-ok-rv32iq-isa-20190608.d: New test
showing RV32IQ succesds on ISA specification 20190608.
|
|
Per Power ISA Version 3.1B 3.3.12, isel uses BC field rather than CRB
field present in binutils sources. Also, per 1.6.2, BC has the same
semantics as BA and BB fields, so this should keep the same flags and
mask, only with the different offset.
opcodes/
* ppc-opc.c
(BC): Define new field, with the same definition as CRB field,
but with the PPC_OPERAND_CR_BIT flag present.
gas/
* testsuite/gas/ppc/476.d: Update.
* testsuite/gas/ppc/a2.d: Update.
* testsuite/gas/ppc/e500.d: Update.
* testsuite/gas/ppc/power7.d: Update.
|
|
With the upcoming SVP64 extension[0] to PowerPC architecture, it became
evident that PowerPC operand indices no longer fit 8 bits. This patch
switches the underlying type to uint16_t, also introducing a special
typedef so that any future extension goes even smoother.
[0] https://libre-soc.org
include/
* opcode/ppc.h (ppc_opindex_t): New typedef.
(struct powerpc_opcode): Use it.
(PPC_OPINDEX_MAX): Define.
gas/
* write.h (struct fix): Increase size of fx_pcrel_adjust.
Reorganise.
* config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands.
(md_assemble): Likewise.
(md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX.
(ppc_setup_opcodes): Adjust opcode index assertion.
opcodes/
* ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for
operand pointer.
(lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise.
(print_insn_powerpc): Likewise.
|
|
|
|
When running test-case gdb.opt/clobbered-registers-O2.exp with clang 12.0.1, I
get:
...
(gdb) run ^M
Starting program: clobbered-registers-O2 ^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
gen_movsd (operand0=<optimized out>, operand1=<optimized out>) at \
clobbered-registers-O2.c:31^M
31 return *start_sequence(operand0, operand1);^M
(gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: runto: run to start_sequence
...
The problem is that the breakpoint in start_sequence doesn't trigger, because:
- the call to start_sequence in gen_movsd is optimized away, despite the
__attribute__((noinline)), so the actual function start_sequence doesn't get
called, and
- the debug info doesn't contain inlined function info, so there's only one
breakpoint location.
Adding noclone and noipa alongside the noinline attribute doesn't fix this.
Adding the clang-specific attribute optnone in start_sequence does, but since
it inhibits all optimization, that's not a preferred solution in a gdb.opt
test-case, and it would work only for clang and not other compilers that
possibly have the same issue.
Fix this by moving functions start_sequence and gen_movsd into their own
files, as a way of trying harder to enforce noinline/noipa/noclone.
Tested on x86_64-linux.
|
|
When running test-case gdb.opt/clobbered-registers-O2.exp with gcc-12, I run
into:
...
(gdb) PASS: gdb.opt/clobbered-registers-O2.exp: backtracing
print operand0^M
$1 = (unsigned int *) 0x7fffffffd070^M
(gdb) print *operand0^M
$2 = 4195541^M
(gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: print operand0
...
The problem is that starting gcc-12, the assignments to x and y in main are
optimized away:
...
int main(void)
{
unsigned x, y;
x = 13;
y = 14;
return (int)gen_movsd (&x, &y);
...
Fix this by making x and y volatile.
Note that the test-case intends to check the handling of debug info for
optimized code in function gen_movsd, so inhibiting optimization in main
doesn't interfere with that.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29161
|
|
LOONGARCH_LINUX_NUM_GREGSET should be defined as 45 (32 + 1 + 1 + 11)
due to reserved 11 for extension in glibc, otherwise when execute:
make check-gdb TESTS="gdb.base/corefile.exp"
there exists the following failed testcase:
(gdb) core-file /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile.core
[New LWP 7742]
warning: Unexpected size of section `.reg/7742' in core file.
Core was generated by `/home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile'.
Program terminated with signal SIGABRT, Aborted.
warning: Unexpected size of section `.reg/7742' in core file.
#0 0x000000fff76f4e24 in raise () from /lib/loongarch64-linux-gnu/libc.so.6
(gdb) FAIL: gdb.base/corefile.exp: core-file warning-free
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
This small patch adds support for TYPE_CODE_DECFLOAT in
aapcs_is_vfp_call_or_return_candidate_1 and pass_in_v_vfp_candidate,
so that GDB for AArch64 knows how to pass DFP parameters and how to
read DFP results when calling a function.
Tested on aarch64-linux-gnu, with a GCC with DFP support in the PATH,
all of GDB's DFP tests pass.
|
|
2022-04-28 Christophe Lyon <christophe.lyon@arm.com>
config/
* dfp.m4 (enable_decimal_float): Enable BID for AArch64.
libdecnumber/
* configure: Regenerate.
|
|
The fix here is to pass "section" down to read_and_display_attr_value.
The test in read_and_display_attr_value is a little bit of hardening.
PR 29171
* dwarf.c (display_debug_macro, display_debug_names): Pass section
to read_and_display_attr_value2.
(read_and_display_attr_value): Don't attempt to check for .dwo
section name when section is NULL.
|
|
PR 29170
* dwarf.c (display_debug_names): Don't attempt to display bucket
clashes when bucket count is zero.
|
|
PR 29169
* dwarf.c (display_gdb_index): Combine sanity checks. Calculate
element counts, not word counts.
|
|
|
|
Move the specialization into an explicit std namespace to workaround a
bug in older compilers. GCC 6.4.1 at least fails to compile the previous
version with the following error:
gdb/arch/aarch64.h:48:13: error: specialization of 'template<class _Tp> struct std::hash' in different namespace [-fpermissive]
struct std::hash<aarch64_features>
|
|
Define a constant for the number of registers stored in a register set
and use this with register_size to compute the size of the
general-purpose register set in core dumps.
This also fixes the build on hosts such as FreeBSD that do not define
an elf_gregset_t type.
|
|
When execute the following command on LoongArch:
make check-gdb TESTS="gdb.base/auxv.exp"
there exist the following unsupported and failed testcases:
UNSUPPORTED: gdb.base/auxv.exp: gcore
FAIL: gdb.base/auxv.exp: load core file for info auxv on native core dump
FAIL: gdb.base/auxv.exp: info auxv on native core dump
FAIL: gdb.base/auxv.exp: matching auxv data from live and core
UNSUPPORTED: gdb.base/auxv.exp: info auxv on gcore-created dump
UNSUPPORTED: gdb.base/auxv.exp: matching auxv data from live and gcore
we can see the following messages in gdb/testsuite/gdb.log:
gcore /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/auxv/auxv.gcore
Target does not support core file generation.
(gdb) UNSUPPORTED: gdb.base/auxv.exp: gcore
In order to fix the above issues, implement the iterate_over_regset_sections
gdbarch method to iterate over core file register note sections on LoongArch.
By the way, with this patch, the failed testcases in gdb.base/corefile.exp
and gdb.base/gcore.exp can also be fixed.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
With check-read1 I run into:
...
[infrun] maybe_set_commit_resumed_all_targets: not requesting
commit-resumed for target native, no resumed threads^M
(gdb) FAIL: gdb.base/ui-redirect.exp: debugging: continue
[infrun] fetch_inferior_event: exit^M
...
The problem is that proc gdb_test doesn't pass down the -prompt option to proc
gdb_test_multiple, due to a typo making this lappend without effect:
...
set opts {}
lappend "-prompt $prompt"
...
Fix this by actually appending to opts.
Tested on x86_64-linux.
|
|
When building gdb with -fsanitize=undefined, I run into:
...
(gdb) PASS: gdb.ada/access_to_packed_array.exp: set logging enabled on
maint print symbols^M
print-utils.cc:281:29:runtime error: negation of -9223372036854775808 cannot \
be represented in type 'long int'; cast to an unsigned type to negate this \
value to itself
(gdb) FAIL: gdb.ada/access_to_packed_array.exp: maint print symbols
...
By running in a debug session, we find that this happens during printing of:
...
typedef system.storage_elements.storage_offset: \
range -9223372036854775808 .. 9223372036854775807;
...
Possibly, an ada test-case could be created that exercises this in isolation.
The problem is here in int_string, where we negate a val with type LONGEST:
...
return decimal2str ("-", -val, width);
...
Fix this by, as recommend, using "-(ULONGEST)val" instead.
Tested on x86_64-linux.
|
|
When building gdb with -fsanitize=undefined, I run into:
...
$ gdb -q -batch -ex "p -(-0x7fffffffffffffff - 1)"
src/gdb/valarith.c:1385:10: runtime error: signed integer overflow: \
0 - -9223372036854775808 cannot be represented in type 'long int'
$1 = -9223372036854775808
...
Fix this by performing the substraction in scalar_binop using unsigned types.
Tested on x86_64-linux.
|
|
This test in test-case gdb.ada/dynamic-iface.exp passes with gcc 8:
...
(gdb) print obj^M
$1 = (n => 3, a => "ABC", value => 93)^M
(gdb) PASS: gdb.ada/dynamic-iface.exp: print local as interface
...
but fails with gcc 7:
...
(gdb) print obj^M
$1 = ()^M
(gdb) FAIL: gdb.ada/dynamic-iface.exp: print local as interface
...
More concretely, we have trouble finding the type of obj. With gcc 8:
...
$ gdb -q -batch main -ex "b concrete.adb:20" -ex run -ex "ptype obj"
...
type = <ref> new concrete.intermediate with record
value: integer;
end record
...
and with gcc 7:
...
type = <ref> tagged record null; end record
...
The translation from tagged type to "full view" type happens in
ada_tag_value_at_base_address, where we hit this code:
...
/* Storage_Offset'Last is used to indicate that a dynamic offset to
top is used. In this situation the offset is stored just after
the tag, in the object itself. */
if (offset_to_top == last)
{
struct value *tem = value_addr (tag);
tem = value_ptradd (tem, 1);
tem = value_cast (ptr_type, tem);
offset_to_top = value_as_long (value_ind (tem));
}
...
resulting in an offset_to_top for gcc 8:
...
(gdb) p offset_to_top
$1 = -16
...
and for gcc 7:
...
(gdb) p offset_to_top
$1 = 16
...
The difference is expected, it bisects to gcc commit d0567dc0dbf ("[multiple
changes]") which mentions this change.
There's some code right after the code quoted above that deals with this
change:
...
else if (offset_to_top > 0)
{
/* OFFSET_TO_TOP used to be a positive value to be subtracted
from the base address. This was however incompatible with
C++ dispatch table: C++ uses a *negative* value to *add*
to the base address. Ada's convention has therefore been
changed in GNAT 19.0w 20171023: since then, C++ and Ada
use the same convention. Here, we support both cases by
checking the sign of OFFSET_TO_TOP. */
offset_to_top = -offset_to_top;
}
...
but it's not activated because of the 'else'.
Fix this by removing the 'else'.
Tested on x86_64-linux, with gcc 7.5.0.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29057
|
|
|
|
In test-case gdb.base/parse_number.exp, we skip architecture auto in the
$supported_archs loop, to prevent duplicate testing.
Likewise, skip language auto and its alias local in the $::all_languages
loop. This reduces the number of tests from 17744 to 15572.
Tested on x86_64-linux, with a build with --enable-targets=all.
|
|
|
|
Currently GDB is not able to debug (Binary generated with Clang) variables
present in shared/private clause of OpenMP Task construct. Please note that
LLVM debugger LLDB is able to debug.
In case of OpenMP, compilers generate artificial functions which are not
present in actual program. This is done to apply parallelism to block of
code.
For non-artifical functions, DW_AT_name attribute should contains the name
exactly as present in actual program.
(Ref# http://wiki.dwarfstd.org/index.php?title=Best_Practices)
Since artificial functions are not present in actual program they not having
DW_AT_name and having DW_AT_linkage_name instead should be fine.
Currently GDB is invalidating any function not havnig DW_AT_name which is why
it is not able to debug OpenMP (Clang).
It should be fair to fallback to check DW_AT_linkage_name in case DW_AT_name
is absent.
|
|
|
|
|
|
Even after the previous patches reworking the inheritance of several
breakpoint types, the present breakpoint hierarchy looks a bit
surprising, as we have "breakpoint" as the superclass, and then
"base_breakpoint" inherits from "breakpoint". Like so, simplified:
breakpoint
base_breakpoint
ordinary_breakpoint
internal_breakpoint
momentary_breakpoint
ada_catchpoint
exception_catchpoint
tracepoint
watchpoint
catchpoint
exec_catchpoint
...
The surprising part to me is having "base_breakpoint" being a subclass
of "breakpoint". I'm just refering to naming here -- I mean, you'd
expect that it would be the top level baseclass that would be called
"base".
Just flipping the names of breakpoint and base_breakpoint around
wouldn't be super great for us, IMO, given we think of every type of
*point as a breakpoint at the user visible level. E.g., "info
breakpoints" shows watchpoints, tracepoints, etc. So it makes to call
the top level class breakpoint.
Instead, I propose renaming base_breakpoint to code_breakpoint. The
previous patches made sure that all code breakpoints inherit from
base_breakpoint, so it's fitting. Also, "code breakpoint" contrasts
nicely with a watchpoint also being typically known as a "data
breakpoint".
After this commit, the resulting hierarchy looks like:
breakpoint
code_breakpoint
ordinary_breakpoint
internal_breakpoint
momentary_breakpoint
ada_catchpoint
exception_catchpoint
tracepoint
watchpoint
catchpoint
exec_catchpoint
...
... which makes a lot more sense to me.
I've left this patch as last in the series in case people want to
bikeshed on the naming.
"code" has a nice property that it's exactly as many letters as
"base", so this patch didn't require any reindentation. :-)
Change-Id: Id8dc06683a69fad80d88e674f65e826d6a4e3f66
|
|
To look for code paths that lead to create_breakpoints_sal creating
multiple breakpoints, I ran the whole testsuite with this hack:
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -8377,8 +8377,7 @@ create_breakpoints_sal (struct gdbarch *gdbarch,
int from_tty,
int enabled, int internal, unsigned flags)
{
- if (canonical->pre_expanded)
- gdb_assert (canonical->lsals.size () == 1);
+ gdb_assert (canonical->lsals.size () == 1);
surprisingly, the assert never failed...
The way to get to create_breakpoints_sal with multiple lsals is to use
"set multiple-symbols ask" and then select multiple options from the
menu, like so:
(gdb) set multiple-symbols ask
(gdb) b overload1arg
[0] cancel
[1] all
[2] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg()
[3] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(char)
[4] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(double)
[5] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(float)
[6] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(int)
[7] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(long)
[8] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(short)
[9] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(signed char)
[10] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned char)
[11] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned int)
[12] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned long)
[13] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned short)
> 2-3
Breakpoint 2 at 0x1532: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 107.
Breakpoint 3 at 0x154b: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 110.
warning: Multiple breakpoints were set.
Use the "delete" command to delete unwanted breakpoints.
... which would trigger the assert.
This commit makes gdb.cp/ovldbreak.exp test this scenario. It does
that by making set_bp_overloaded take a list of expected created
breakpoints rather than just one breakpoint. It converts the
procedure to use gdb_test_multiple instead of send_gdb/gdb_expect
along the way.
Change-Id: Id87d1e08feb6670440d926f5344e5081f5e37c8e
|
|
This adds a new ctor to momentary_breakpoints with a few parameters
that are always necessary for momentary breakpoints.
In particular, I noticed that set_std_terminate_breakpoint doesn't
make the breakpoint be thread specific, which looks like a bug to me.
The point of that breakpoint is to intercept std::terminate calls that
happen as result of the called thread throwing an exception that won't
be caught by the dummy frame. If some other thread calls
std::terminate, IMO, it's no different from some other thread calling
exit/_exit, for example.
Change-Id: Ifc5ff4a6d6e58b8c4854d00b86725382d38a1a02
|
|
Momentary breakpoints have no breakpoint number, their breakpoint
number should be always 0, to avoid constantly incrementing (or
decrementing) the internal breakpoint count.
Indeed, set_momentary_breakpoint installs the created breakpoint
without a number.
However, momentary_breakpoint_from_master incorrectly gives an
internal breakpoint number to the new breakpoint. This commit fixes
that.
Change-Id: Iedcae5432cdf232db9e9a6e1a646d358abd34f95
|
|
This tweaks the intro comments of the following classes:
internal_breakpoint
momentary_breakpoint
breakpoint
base_breakpoint
watchpoint
catchpoint
Change-Id: If6b31f51ebbb81705fbe5b8435f60ab2c88a98c8
|
|
After the previous patches, only base_breakpoint subclasses use
add_location(sal), so we can move it to base_breakpoint (a.k.a. base
class for code breakpoints).
This requires a few casts here and there, but always at spots where
you can see from context what the breakpoint's type actually is.
I inlined new_single_step_breakpoint into its only caller exactly for
this reason.
I did try to propagate more use of base_breakpoint to avoid casts, but
that turned out unwieldy for this patch.
Change-Id: I49d959322b0fdce5a88a216bb44730fc5dd7c6f8
|
|
Move common bits of catchpoint and exception_catchpoint to
breakpoint's ctor, to avoid duplicating code.
Change-Id: I3a115180f4d496426522f1d89a3875026aea3cf2
|
|
struct catchpoint's ctor currently calls init_raw_breakpoint, which is
a bit weird, as that ctor-like function takes a sal argument, but
catchpoints don't have code locations.
Instead, make struct catchpoint's ctor add the catchpoint's dummy
location using add_dummy_location.
init_raw_breakpoint uses add_location under the hood, and with a dummy
sal it would ultimately use the breakpoint's gdbarch for the
location's gdbarch, so replace the references to loc->gdbarch (which
is now NULL) in syscall_catchpoint to references to the catchpoint's
gdbarch.
struct catchpoint's ctor was the last user of init_raw_breakpoint, so
this commit eliminates the latter.
Since catchpoint locations aren't code locations, make struct
catchpoint inherit struct breakpoint instead of base_breakpoint. This
let's us delete the tracepoint::re_set override too.
Change-Id: Ib428bf71efb09fdaf399c56e4372b0f41d9c5869
|
|
Software watchpoints allocate a special dummy location using
software_watchpoint_add_no_memory_location, and then
breakpoint_address_bits checks whether the location is that special
location to decide whether the location has a meaninful address to
print.
Introduce a new bp_loc_software_watchpoint location kind, and make
breakpoint_address_bits use bl_address_is_meaningful instead, which
returns false for bp_loc_other, which is in accordance with we
document for bp_location::address:
/* (... snip ...) Valid for all types except
bp_loc_other. */
CORE_ADDR address = 0;
Rename software_watchpoint_add_no_memory_location to
add_dummy_location, and simplify it. This will be used by catchpoints
too in a following patch.
Note that neither "info breakpoints" nor "maint info breakpoints"
actually prints the addresses of watchpoints, but I think it would be
useful to do so in "maint info breakpoints". This approach let's us
implement that in the future.
Change-Id: I50e398f66ef618c31ffa662da755eaba6295aed7
|
