| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Tidy printing of bfd_vma's.
|
|
* coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
.rodata, because cs_to_section doesn't deal with .rodata. Fix test
accordingly.
|
|
|
|
|
|
|
|
* configure.in (ia64*-*-elf*): Add gdb and friends to noconfigdirs.
|
|
|
|
Include *-*-linux* in svr4pic tests
Test weak symbol handling.
|
|
the relocation for weak symbols.
|
|
* solib.c (symbol_add_stub): Remember the index and the name of
the section with the lowest address. Use this data (instead of
data from .text) to pass info into symbol_file_add.
* elfread.c (record_minimal_symbol_and_info): Use the section
where the symbol lives to get the index, instead of guessing.
|
|
* ldlang.c (open_input_bfds): Don't load the same file within
a group again if the whole archive has been loaded already.
|
|
Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
* sparc-tdep.c: include arch-utils.h.
(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
(GDB_TARGET_IS_SPARC64): make into a runtime test.
(struct frame_extra_info): Define, use instead of the macro.
(Many places): Use alloca instead of statically allocated buffers
that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
(sparc_extract_struct_value_address): Accept a pointer arg instead
of an array sized by REGISTER_BYTES.
(examine_prologue): Accept a pointer to an array of CORE_ADDR,
instead of the defunct struct frame_saved_regs. Recognize new
Sparc64 store instructions as part of the prologue. Ignore the
destination of a frame store when parsing the prologue (so long
as it's on the stack).
(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
instead of the defunct struct frame_saved_regs.
(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
supply_register. Provide 4-byte offset to compensate for diff
between size of the prgreg_t elements on a 64-bit host and size
of the registers for a 32-bit target. Fill all inaccessible regs
with zero so they won't keep being requested again and again.
(fill_gregset): Handle 32/64 size difference between registers
and prgreg_t. Handle as many new 64-bit regs as possible.
(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
(sparc_push_arguments): Rename to sparc32_push_arguments.
Copy arguments into registers as well as onto stack, so that the
CALL_DUMMY (code pushed onto the target stack) is not required.
(sparc_extract_return_value): Rename to sparc32_extract_return_value.
(sparc_store_return_value): Use memset instead of bzero.
Use write_register_gen instead of write_register_bytes.
(sparclet_store_return_value): New function.
(_initialize_sparc_tdep): Call register_gdbarch_init to activate
the gdbarch multi-architecture system.
(sp64_push_arguments): Rename to sparc64_push_arguments.
Extend to store arguments in general registers as well as on stack.
(sparc64_extract_return_value): Rename to sp64_extract_return_value.
Use as a private function, to be called by the new external function
sparc64_extract_return_value.
(sparclet_extract_return_value): New function.
(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
sparc64_register_name, sparc_print_extra_frame_info,
sparclite_register_name, sparclet_register_name,
sparc_push_return_address, sparc64_use_struct_convention,
sparc32_store_struct_return, sparc64_store_struct_return,
sparc32_register_virtual_type, sparc64_register_virtual_type,
sparc32_register_size, sparc64_register_size,
sparc32_register_byte, sparc64_register_byte,
sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
sparc_convert_to_raw, sparc_frame_init_saved_regs,
sparc_frame_address, sparc_gdbarch_fix_call_dummy,
sparc_coerce_float_to_double, sparc_call_dummy_address,
sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
sparc_return_value_on_stack): New functions supporting multi-arch.
(sparc_gdbarch_init): New function; initialize multi-arch.
(struct gdbarch_tdep): Define, use for private multi-arch data.
* config/sparc/tm-sparc.h: Move definitions around, enclose with
#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
definitions. Add enums for register names, to help debugging gdb.
This header file must work for non-multi-arch and for multi-arch.
* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
Define GDB_MULTI_ARCH.
* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
* config/sparc/tm-sparclite.h: Ditto.
* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
avoid using deprecated REGISTER_NAMES macro.
* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
|
|
also available in common mode when powerpc syntax is being used.
|
|
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
* gdbarch.c, gdbarch.h: Regenerate.
* core-regset.c: Change FP0_REGNUM to a runtime test.
* procfs.c: Ditto.
* sun3-nat.c: Ditto.
* sparc-tdep.c: Ditto.
* i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
* ptx4-nat.c: Ditto.
* sol-thread.c (sol_thread_create_inferior): only add the thread
to the thread list if it is not already in there.
(prototypes for thread_db func ptrs): pretty up formatting.
|
|
|
|
* config/tc-ia64.c (output_P7_format, case mem_stack_f): Output fixed
frame size in units of 16 bytes, as required per SW Conventions manual.
(output_unw_records): Output info-block header as a dword to get
byte-order right.
|
|
|
|
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
|
|
* sol-thread.c (sol_thread_create_inferior): only add the thread
to the thread list if it is not already in there.
(prototypes for thread_db func ptrs): pretty up formatting.
|
|
* gdb.base/interrupt.exp: Make "pass" message say "send"
rather than "send_gdb" (for consistancy).
|
|
with the version name.
|
|
with the version name.
* config/djgpp/djconfig.sh: Use more warning switches.
* config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
@V@ placebo.
|
|
|
|
|
|
|
|
|
|
|
|
bfd_error_wrong_format rather than bfd_error_file_truncated.
|
|
|
|
|
|
multi-arch vector.
|
|
* proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always define.
|
|
|
|
Youmans <3diff@flib.gnu.ai.mit.edu>.
|
|
|
|
* Makefile.am: Change all instances of xcoff.h to xcoff-target.h
* coff-rs6000.c: Ditto.
* coff64-rs6000.c: Ditto.
* coff-pmac.c: Ditto.
* Makefile.in: Regenerate.
|
|
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags):
Change U802TOC64MAGIC to U803XTOCMAGIC.
include:
* coff/rs6k64.h (U802TOC64MAGIC): Change to U803XTOCMAGIC.
|
|
* gdb.base/break.exp: When compiled with -O2 optimization,
gdb may not stop at the first line of main, due to code motion.
|
|
* procfs.c: Cleanup of procfs tracing. Move defines and
prototypes to proc-utils.h
* proc-utils.h: Define tracing macros. Declare trace functions.
* proc-api.c: Make procfs tracing a runtime option.
(prepare_to_trace): New function, abstracted out of several
places. Open a trace file if one is required.
(ioctl_with_trace, write_with_trace, open_with_trace,
close_with_trace, wait_with_trace, lseek_with_trace):
Report errno if an error occurs in a system call.
(write_with_trace): Make 2nd arg void *, to agree with write.
|
|
* elfread.c (elf_symtab_read): The calculation of 'offset'
must be done for each symbol, not just once. The index
used must be the index of the section where 'sym' resides,
not .text.
|
|
* procfs.c (many functions): change int cmd; to long cmd;
Solaris /proc API calls this parameter a long, and requires it
for 64-bit hosts (where sizeof(long) != sizeof(int)). UnixWare
calls it an int, but on existing UnixWare hosts, int and long
are the same size. So long it must be. If a future UnixWare
version has problems with this, we'll have to use autoconf.
* proc-api.c (write_with_trace): use long instead of int.
|
|
* solib.c (elf_locate_base, info_sharedlibrary_command):
Look at the bfd to determine if it is elf32 or elf64, rather
than using an ifdef. This makes it runtime teststable and
multi-arch.
|
|
* elf.c (bfd_elf_get_arch_size): New function, return 32 | 64 | -1.
* bfd-in.h: Prototype bfd_elf_get_arch_size.
* bfd-in2.h: Prototype bfd_elf_get_arch_size.
|
|
already defined.
|
|
and missing return when handling an ordinary signal from the
inferior.
|
|
* objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
SECT_OFF_RODATA): Define as functions of OBJFILE. Add
sect_index_text, sect_index_data, sect_index_rodata,
sect_index_bss to objfile structure.
* gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
SECT_OFF_RODATA): Remove.
* objfiles.c (allocate_objfile): Initialize
sect_index_{text,data,bss,rodata} to -1, for error detection.
* symfile.c (default_symfile_offsets): Initialize
sect_index_{text,data,bss,rodata} from bfd information.
* xcoffread.c (xcoff_symfile_offsets): Ditto.
* somread.c (som_symfile_offsets): Initialize
sect_index_{text,data,bss,rodata}.
* coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
stabsread.c, symfile.c, xcoffread.c:
Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
current objfile.
* xcoffread.c: Add new field objfile to find_targ_sec_arg.
|
|
|
|
|
|
|
